Parts List PL 003-320

January 2008

Type 37 Diaphragm Meter

with
Intermediate Linkage
—
Parts Inside Case
—
Styles C and D

*Parts preceded by an asterisk are recommended spare parts.

Give Instrument Model Number and Style when ordering.
See Recommended Spare Parts Summary section for quantities.

TO ORDER PARTS, CALL FOXBORO AT 1-888-FOXBORO (1-888-369-2676)

PL 003-320
Page 2

PARTS INSIDE CASE

FOR USE IN
MODEL 40, 40M, AND 40P
RECTANGULAR CASE RECORDERS (Figure 1)

1
2

4
9
5
8 6 7

Item Part No. Qty. Part Name

1 Below 1 Pen-Arm Movement Assembly
M0121CR 1-Pen
M0121CT 2-Pen
M0121AM 3-Pen

2 – – Pen and Pen Arm (refer to PL 001-105 for Replacement Parts)

3 D0148EL 1 Link, Adjustable, 114 to 127 mm (4.5 to 5.0 in)

*4 D0116PL 1 Lever
*5 D0116RM 1 Spring

6 X0100ZP 3,4 Screw, Hexhd, 0.375-16 x 0.625 (see Note 1)

7 0048218 3,4 Washer
8 N0206CC 1 Link, Adjustable, 75 to 92 mm (2.9 to 3.6 in)

9 M0104LB 1 Intermediate Movement Assembly (see Note 2)

– 0008462 1 Screw, Roundhd, 0.125-40 x 0.375 (holds Item 9)

NOTE
1. Item 6 screw applies to M40 instruments only. For M40M instruments, refer to PL 001-331,
and for M40P instruments, refer to PL 001-330.
2. Refer to Figure 3 for parts included in Item 9, Intermediate Movement Assembly.
 PL 003-320
Page 3

DIAPHRAGM METER PARTS (Figure 2)

13 25
3 1
2 4
5
19 20
11 14 15
10
9 7 8A
7 8
5 6
3 4
1 2

17
23 21
18 12 13 22 24
16

12
13

Item Part No. Qty. Part Name

1 Below 8 Nut, 0.825-18 Carbon Steel - Zinc Plated (Note 7)
X0104EN ASTM A-194 Grade 2H
D0128GR ASTM A-194 Grade 2M

2 Below 2 Cover
D0116BC Carbon Steel - Zinc Plated, 2000 psi (Note 7)
D0116KX 316 ss, 2000 psi (Note 7)
D0128GN Carbon Steel - Zinc Plated, 1500 psi (Note 7)
D0128GP 316 ss, 1500 psi (Note 7)

*3 D0120LE 2 Screen, 18.2 mm (0.72 in) Diameter

4 Below 2 Plug, 1/2 in NPT

D0116KR Carbon Steel - Zinc Plated
D0116KZ 316 ss (Note 7)

*5 Below 2 O-ring, 110.7 mm (4.36 in ID)

D0116FN Standard
D0116RK Oxygen service

6 D0105FW 1 Nut, 0.375-24 (316 ss) (Note 7)

7 Below 3,6 Screw, 0.190-32 (Note 7)

X0116RN 0.187 in (for range springs marked 20 or 50)
X0100YY 0.250 in (for range springs marked 100 or 200)

8 Tables 1/2 – Range Springs (see Table 1 and 2, Note 3)

8A Tables 1/2 – Range Springs (see Table 1 and 2)
PL 003-320
Page 4

Table 1. Range Springs Primary Ranges (Notes 2 and 4)

Use these Springs to Obtain these Ranges

Item and
Spring Mark Part No. and Qty kPa inH2O
8A - 20 D0123ME - 1 0 to 5 0 to 20
8 - 50 D0116LA - 1 0 to 13 0 to 50
8A - 100 D0123MA - 1 0 to 25 0 to 100
8A - 100 D0123MA - 1
Dual, 0 to 50 Dual, 0 to 200
8A - 100 D0123MA - 1
8A - 20 D0123ME - 1 3 to 0 to 3 10 to 0 to 10
8 - 50 D0116LA - 1 6 to 0 to 6 25 to 0 to 25
8A - 100 D0123MA - 1 13 to 0 to 13 50 to 0 to 50
8A - 100 D0123MA - 1
Dual, 25 to 0 to 25 Dual, 100 to 0 to 100
8A - 100 D0123MA - 1

Table 2. Range Springs Intermediate Ranges (Notes 2 and 4)

Use these Springs to Obtain these Ranges

Item and
Spring Mark Part No. and Qty kPa inH2O
8A - 100 D0123MA - 1
Dual, 39 to 50 Dual, 155 to 200
8A - 100 D0123MA - 1
8 - 50 D0116LA - 1
Dual, 31 to 39 Dual, 125 to 155
8A - 100 D0123MA - 1
8A - 20 D0123ME - 1
Dual, 28 to 31 Dual, 110 to 125
8A - 100 D0123MA - 1
8A - 100 D0123MA - 1 19 to 28 75 to 110
8A - 20 D0123ME - 1
Dual, 15 to 19 Dual, 60 to 75
8 - 50 D0116LA - 1
8 - 50 D0116LA - 1 10 to 15 40 to 60
8A - 20 D0123ME - 1
Dual, 6 to 10 Dual, 25 to 40
8A - 20 D0123ME - 1
8A - 20 D0123ME - 1 0 to 6 0 to 25

Item Part No. Qty. Part Name

9 X0168SS 1 Washer (between dual range springs)
10 D0116FP 1 Bushing (Note 7)
11 D0116FM 1 Gasket
*12 UO118EP 2 Screen

13 Below 4 Plug, 1/2 in NPT (Note 7)

B0139EQ Carbon Steel - Zinc Plated
B0139ER 316 ss

14 D0126AL 1 Gasket
15 D0116FR 1 Data Plate
 PL 003-320
Page 5

Item Part No. Qty. Part Name

16 Below 1 Diaphragm Meter Assembly
D0128QH Carbon Steel - Zinc Plated, 2000 psi with ASTM A-193
Grade B7 Studs (Note 7)
D0128QJ 316 ss, 2000 psi with ASTM A-193 Grade B7 Studs (Note 7)
D0128GL Carbon Steel - Zinc Plated, 1500 psi with ASTM A-193
Grade B7M Studs (Note 7)
D0128GM 316 ss, 1500 psi with ASTM A-193 Grade B7M Studs (Note 7)
D0128QQ For oxygen service 20 to 50 in
D0128QR For oxygen service 51 to 200 in

17 Below 4 Stud, 0.625-18 Carbon Steel - Zinc Plated (Note 7)

D0116MS ASTM A-183 Grade B7
D0128GX ASTM A-193 Grade B7M

18 C0107AG 1 Groove Pin

19 X0116EL 2 Screw, Roundhd, 0.190-32 x 0.375

20 D0126AM 1 Plate Assembly

21 B0138MJ 1 Vent Screw (see Note 1)

22 B0139ET 1 Vent Plug (see Note 1)

23 D0116FT 1 Shipping Stop (see Note 1)

24 0041258 1 Nut, 0.312-24 (see Note 1)

25 D0116RP 1 Shipping Stop

NOTE
1. For oxygen service, Items 21, 22, 23, and 24 are used instead of one plug, Item 13, and ship-
ping stop, Item 25.
2. Since September 1977, the range spring combination for all dual one half springs and the full
springs marked 200 have been replaced by those in Tables 1 and 2.
3. If replacing pair of springs, Item 8, with a single spring, also order Item 10, screw.
4. For springs conforming to NACE Standard MR-01-75 substitute part numbers as follows: use
D0128QU in place of D0123ME, use D0128QV in place of D0116LA, and D0128QW in place of
D0123MA.
5. Standard plated studs and nuts are non-process wetted and are suitable for Class III bolting
requirements of NACE Standard MR-01-75.
6. Optional B7M studs and 2M nuts are non-process wetted and are suitable for Class II bolting
requirements of NACE Standard MR-01-75.
7. This metallic wetted material conforms to NACE Standard MR-01-75.
PL 003-320
Page 6

INTERMEDIATE MOVEMENT ASSEMBLY (Figure 3)

4 8
5
6 7 9
2 3

10

11
11 13
12

Item Part No. Qty. Part Name

– M0104LB – Intermediate Movement Assembly

1 M0104LC 1 Arbor Assembly

2 0048583 1 Screw, Filhd, 0.086-56 x 0.125
3 0006399 1 Washer
4 M0104MF 1 Lever Assembly
5 P0106CX 1 Adjustable Lever Assembly
6 0011845 1 Screw, Roundhd, 0.086-56 x 0.125
7 0039634 1 Screw
8 U0101FE 1 Lever Assembly
9 0039634 1 Screw

10 B0135NT 1 Bearing Screw

11 0043480 2 Nut, 0.125-56
12 M0104LP 1 Bracket
13 B0135NK 1 Bearing Screw
PL 003-320
Page 7
PL 003-320
Page 8

RECOMMENDED SPARE PARTS SUMMARY

Number of Parts
Recommended for
Figure 1 5 20
Number Item Part No. Part Name Inst. Inst. Inst.
1 4 D0116PL Lever 0 1 2
5 D0116RM Spring 0 1 2
2 3 D0120LE Screen, 18.2 mm (0.72 in) Diameter 2 2 4
5 Below O-Ring 2 2 4
D0116FN Standard
D0116RK For Oxygen Service
12 U0118EP Screen 2 2 4

33 Commercial Street Invensys and Foxboro are trademarks of Invensys plc, its subsidiaries, and affiliates.
Foxboro, MA 02035-2099 All other brand names may be trademarks of their respective owners.
United States of America
www.foxboro.com
Inside U.S.: 1-866-746-6477
Outside U.S.: 1-508-549-2424 Copyright 1958-2008 Invensys Systems, Inc.
or contact your local Foxboro All rights reserved
representative.
Facsimile: 1-508-549-4999 MB 150 Printed in U.S.A. 0108