Aero 40FP

Parts Manual & Illustrations

Some Parts are sold only as assemblies

For a price quote please contact:

Request for Quote Parts & Accessories

Regional Email Contacts

Americas
service@coldjet.com

Mexico/Latin America
soporte@coldjet.com

Asia
service.apac@coldjet.com

Europe
service.eu@coldjet.com

July 2021
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE
Item Number Quantity Document Number Title
UPDATED BOM WITH SUBASSEMBLIES RA THER THAN THE
A
AERO 40HP
6/4/2015 1 1 2E0828 FEEDER, VARIABLE FEED ROTARY, 4PPM, AERO 40FP
REVISED 2E0828-A TO REV -B, 2G1444-A TO REV -B,
B REPLACED 2J0212 WITH 2J0642, 2J0211 WITH 2J0643, 2J0220 6/13/2015 2 1 2G1489 ENCLOSURE, ELECTRICAL W/ CONTROL PLATE & MOUNTED COMPONENTS, AERO 40FP
WITH 2J0644.

C
REVISED 2J0208-H TO REV -J, 2E0828-B TO REV -C, 2J0235-J
7/10/2015 3 1 2I0505 AIR, BLAST W/ MOUNTED COMPONENTS, LOW FLOW REGULATOR
TO REV -K
D REVISE FEEDER A SS'Y 2E0828-C TO 2E0828-D 8/10/2015 4 1 2J0235 HOPPER, BLAST UNIT W/ MOUNTED COMPONENTS, AERO 40FP
REVISE HOPPER ASS'Y 2J0235-K TO 2J0235-M, REPLACE
E 8/24/2015
ACCESSORIES 2Z0018 WITH 2Z0027
REVISE 2E0828-D TO REV-F, 2G1444-B TO REV -C, 2I0410 TO
5 1 2J0642 PANEL, RIGHT SIDE W/ MOUNTED COMPONENTS
F 10/12/2015
REV -A, 2J0235-M TO REV -P. 4 6 1 2J0643 PANEL, LEFT SIDE W/ MOUNTED COMPONENTS
D G
REPLACED 2G1444-C WITH 2G1489-A AND 2I0410-A WITH
2I0451-A. UPDATED PNEUMATIC SCHEMATIC.
REPLACED 2I0451-B WITH 2I0473-A AND 2J0208-J WITH
7/12/2017 1
7 1 2J0644 PANEL, FRONT W/ MOUNTED COMPONENTS
D
H
2J0772-A. 3P0692-A WAS 3P0451-J.
J ADDED 3J3540, SH-M5-012, WO-M5 AND NL-M5 5/17/2019 8 1 2J0772 FRAME, BLAST UNIT W/ MOUNTED COMPONENTS, AERO 40FP
K REPLACED 2I0473 WITH 2I0505 7/18/2019
2 9* 1 2Z0027 ACCESSORIES, MACHINE PACKAGE, AERO SERIES
1 3
1 10 1 3J3540 COVER, THUMPER, ALUMINUM
11* 1 3P0692 LABEL, SERIAL PLATE, ELECTRIC, ENGLISH, ANODIZED ALUMINUM
12* 56 IN 4N0173-BLK TUBING, .040 IN WALL X 1/4 IN OD, BLACK, NYLON
13* 54 IN 4N0173-WHT TUBING, .040 IN WALL X 1/4 IN OD, WHITE, NYLON
14* 4 4Z0531 RIVET, BLIND 1/8 INCH DIA X .262 5000, .25 INCH, ALUMINUM
5 15 2 NL-M5 NUT, HEX W/ NYLON INSERT, M5, STAINLESS STEEL
1
16 2 SH-M5-012 SCREW, SOCKET HEAD CAP, M5 X 12 MM LONG, STAINLESS STEEL
17 4 WO-M5 WASHER, OVERSIZED FLAT, M5 X 15 MM OD, STAINLESS STEEL

C 10 C
1

8
1

15
2
16
2 6
1
17
4

7
B 1 B

1
1 SEE NOTE #1

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
3 SURFACES ASSEMBLY
1 K THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
BLAST UNIT, AERO 40FP
MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

- P00487P
NOTES: ELECTRICAL SCHEMATICS FIRST ARTICLE INSPECTION: DATE: COPYRIGHT© COLD JET, LLC. ALL RIGHTS
RESERVED. NO PART OF THIS DESIGN MAY BE
DERIVED FROM:

-
DATE: RELEASE DATE:
SHEET
- -
1. APPLY DIELECTRIC COMPOUND PRIOR TO INSTALLING FEEDER.
REPRODUCED, TRANSMITTED, TRANSCRIBED,

G1: 120VAC REFERENCE 6G0310 FUNCTIONAL VERIFICATION: DATE:

STORED IN A RETRIEVAL SYSTEM, OR
TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
DATE: PART NUMBER:
1 OF 3
G2: 230VAC REFERENCE 6G0311 IN ANY FORM OR BY ANY MEANS, WHETHER IT bgeiger 7/18/2019 REVISION:

2A0290 K
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. MRIVIR 3/27/2015

1 2 3 4 5 6
 1 2 3 4 5 6

D D

36.22 16.88
919.9 428.6

C C

39.76
1009.8

32.55
826.8
B B

20.65
524.6
UNLESS OTHERWISE SPECIFIED
X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
BLAST UNIT, AERO 40FP
MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

- P00487P
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT bgeiger
DATE:

7/18/2019
PART NUMBER:
2 OF 3
REVISION:

2A0290 K
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. MRIVIR 3/27/2015

1 2 3 4 5 6
 1 2 3 4 5 6
LEGEND
LINE/ DEVICE LABEL DEFINITION
PELLETS SUPPLIED BV BALL VALVES
TO HOPPER PRV PRESS RELIEF VALVES
FC FLOW CONTROL VALVES
PS PRESSURE SWITCHES
TS TEMPERATURE SWITCHES
LS LEVEL SWITCHES
BLAST AIR R REGULATORS
D BLASTER
GAUGE
GA01
F FILTERS D
AERO 40FP GA GAUGES
M MANIFOLDS
PA PNEUMATIC ACTUATORS
SA SOLENOID ACTUATORS
FLT FLOAT SWITCH
SV SOLENOID VALVE
F/R FILTER /REGULATOR
BLAST AIR
PILOT P017 / BLK
REGULATOR
R03
THUMPER
PA01
COMPRESSED BLAST AIR
AIR SUPPLY VALVE BLAST AIR
1" NPS FEMALE BV01 OUT
BLAST AIR -16 JICM
REGULATOR
R02 HOSE LEGEND
P011 / P012 / BLASTING PELLETS, MANUAL FEED
-20 TUBING, 304 SST
-16 TUBING, 304 SST
C RAM ROD -16 FLEXIBLE HOSE C
PA02 .25" NYLON TUBING, BLACK
.25" NYLON TUBING, WHITE
P010 / BLK CLOSE OPEN MECHANICAL FITTINGS
CONTROL AIR FIELD CONNECTIONS
REGULATOR
75 PSI F/R01 RAM ROD
PA03
CONTROL AIR
PRESS REL
250 PSI PRV01 PELLET
FEEDER
1/4 HP
MOT35

P017 / WHT

P018 / BLK

B BLAST AIR THUMPER & B

SOL18 RAMROD
SOL20

P015 / BLK
5 4 5 4
PRESSURE 1 1
BLEED 2 2
3 3
BV02 P016 / WHT
P014 / BLK P013 / BLK

MANIFOLD
M01

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
BLAST UNIT, AERO 40FP
MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

- P00487P
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT bgeiger
DATE:

7/18/2019
PART NUMBER:
3 OF 3
REVISION:

2A0290 K
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. MRIVIR 3/27/2015

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE Item Quantity Document Revision Title
A
REVISED 3E1934, 3E1935, 3E1937, AND 3E1941 TO A.
REPLACED SS-M6-08-050 WITH 4Z1100
1/20/2015
Number Number
REMOVED 3E0817-D, REMOVED 3E0818-D, REMOVED 5Z0009
B
QTY 2, REVISED 3E1934-A TO B, REVISED 3E1935-A TO B,
REVISED 3E1936 TO A, REVISED 3E1937-A TO B, REVISED
2/26/2015 1 1 3E0982 D GUARD, FINGER, STAINLESS STEEL
3E1940 TO A, REVISED 3E1941-A TO B, REVISED 3E1949 TO A
6
C
D
REVISED 3E1936-A TO C
REVISED 3E1941-B TO C
6/1/2015
6/8/2015
1 2 1 3E1934 B BLOCK, FEEDER AIR, CODE 61, ALUMINUM
E
F
ADDED TORQUE SPECIFICATION
REVISED 3E1935-B TO C AND 3E1936-C TO D
8/24/2015
10/6/2015 3 1 3E1935 C PAD, LOWER FEEDER, LOW PRESSURE, GRAY, POLYMER
D 4 1 3E1936 D PISTON, FEEDER AIR, LOWER, ALUMINUM D
16 SEE NOTE #2 5 1 3E1937 B PLATE, AIR BLOCK BASE, ALUMINUM
4 TIGHTEN TO 85 IN-LBS 6 1 3E1940 A PAD, UPPER FEEDER, WHITE, POLYMER
7 2 3E1941 C PLATE, FEEDER BEARING, ALUMINUM
8 2 3E1949 A PLATE, FEEDER AIR SUPPORT, STAINLESS STEEL
8 INSTALL COUNTERBORE 9 2 4E0088 A BEARING, BALL, 50MM BORE, COBRA BLUE
2
SIDE DOWN
10 4 4Z0255 WASHER, BELLEVILLE DISC SPRING, .625 X .317 X .047 IN THK, STAINLESS STEEL
18
4 SEE NOTE #1 11 16 4Z0438 WASHER, BELLEVILLE DISC SPRING, .50 X .255 X .038 IN THK, STAINLESS STEEL
12 4 5Z0009 - SCREW, SOCKET HEAD CAP, M6 X 25 MM LONG, STAINLESS STEEL W/ SEALANT
NOTICE NOTCH ORIENTATION 13 6 5Z0010 SCREW, SOCKET HEAD CAP, M6 X 16 MM LONG, STAINLESS STEEL W/ SEALANT
3 14 4 5Z0012 - SCR, SCH CAP - M6 x 1 x 35mm Lg. w/ POLY-PATCH
1 F
15 4 5Z0013 SCR, SCH CAP - M8 x 1.25 x 25mm Lg. w/POLY-PATCH
C 16 4 5Z0072 SCREW, HEX HEAD SHOULDER CAP, MODIFIED, M6 X 8 MM OD X 50 MM LG, SST C
PART ONLY ASSEMBLES 14 11 17 2 DP-04-008 PIN, DOWEL - 1/4 X 1/2 LONG, STAINLESS STEEL
ONE DIRECTION 4 16 SEE NOTE #2
18 4 N70-011 O-RING, 70 DUROMETER ROUND CROSS SECTION, .07 IN WIDE X .301 IN ID,
BLACK, BUNA-N
SEE NOTE #2 19 1 N70-232 O-RING, 70 DUROMETER ROUND CROSS SECTION, .139 IN WIDE X 2.734 IN ID,
11 13 BLACK, BUNA-N
16 6
20 1 N70-243 O-RING, 70 DUROMETER ROUND CROSS SECTION, .139 IN WIDE X 4.109 IN ID,
BLACK, BUNA-N
21 2 SH-M6-010 SCREW, SOCKET HEAD CAP, M6 X 1 X 10MM LONG, STAINLESS STEEL
9
2

1
1 20
1 SEE NOTE #1

NOTICE NOTCH ORIENTATION 4

1 F
B B
19
1 SEE NOTE #1

7
2

11 21 2
SEE NOTE #2 16 2 1

5 15 10
1 4 4 SEE NOTE #2
11 12 UNLESS OTHERWISE SPECIFIED
SEE NOTE #2 X/X u 1/64
A 16 4
17
.X
.XX
.XXX
u .1
u .01
u .005
A
2 .XXXX u .0005
ANGLES u .5 v
SEE NOTE #1
D
TYPE:
125
SURFACES ASSEMBLY
11 13 8X
SEE NOTE #2 16 6
THE DESIGN CONTAINED IN THIS DRAWING
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
TITLE:

HOUSING, LOW PRESSURE ROTARY FEEDER, CODE 61, AERO SERIES

PRESS FIT PARTS TOGETHER MANUFACTURABILITY REVIEW: DATE:
USED IN ANY WAY DETRIMENTAL TO THE
INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE:

-
PROJECT:

FI00070
NOTES:
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
- -
1. APPLY CJ# 10100, DOW CORNING MOLYKOTE 33 MEDIUM GREASE.
STORED IN A RETRIEVAL SYSTEM, OR
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
rdrusell
DATE:

10/6/2015
PART NUMBER:
1 OF 1
2. USE BLUE SEMI-PERMANENT THREAD LOCKING AGENT AFTER CLEANING THE THREADS. IN ANY FORM OR BY ANY MEANS, WHETHER IT
REVISION:

2E0802 F
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. rkocol 06\19\2014

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE
Item Number Quantity Document Title
A
COUPLING 3E0993 WAS 3E0993-A, FITTING 68PL-4-2 WAS
6/8/2015
Number
4Z0951. REVISED 2E0802-B TO C.
B REPLACED 3E1898 WITH 3E2050. 6/11/2015 1 1 2E0802 HOUSING, LOW PRESSURE ROTARY FEEDER, CODE 61, AERO SERIES
C REVISED 2E0802-C TO D 7/9/2015
D REVISED 2E0802-D TO E & REPLACED 3E0989-F WITH 3E2009 8/24/2015 2 1 3E0985 PLATE, FEEDER MOUNTING, ALUMINUM
E REVISED 2E0802-E TO F 10/6/2015
F REPLACED ROTOR 3E2050 WITH 3E2060-A 2/18/2016 3 1 3E0993 COUPLING, ROTOR - PNEUMATIC MOTOR
4 1 3E1494 PAD, ROTOR WEAR, POLYMER
TIGHTEN TO 25 FT-LBS 5 1 3E1495 PLATE, ROTOR WEAR, ALUMINUM
D 18 6 1 3E1616 BRACKET, RAM-ROD CYLINDERS, 50mm FEEDER D
4
9 14 7 1 3E2009 BLOCK, MOTOR MOUNT, ALUMINUM
1 4
REFERENCE ELECTRICAL B.O.M. 8 1 3E2060 ROTOR, 4 PPM, 5/32 ROUNDED, ANODIZED ALUMINUM
9 1 4E0239 MOTOR, FLANGE MOUNT, 1/4 HP, 25:1 GEAR RATIO, .750 IN OUTPUT SHAFT
10 2 4I0520 CYLINDER, RAMROD, FEEDER
REFERENCE ELECTRICAL B.O.M. 11 4 4Z0255 WASHER, BELLEVILLE DISC SPRING, .625 X .317 X .047 IN THK, STAINLESS STEEL
12 6 4Z0438 WASHER, BELLEVILLE DISC SPRING, .50 X .255 X .038 IN THK, STAINLESS STEEL
13 2 4Z0447 WASHER, WEDGE LOCK, 5/8 IN AND M16 SCREW SIZE X 1 IN OD X .13 IN THICK,
STAINLESS STEEL
14 4 4Z0472 WASHER, BELLEVILLE, .875 X .442 X .045, STEEL
15 2 4Z0798 WASHER, WEDGE-LOCK .25 INCH ID, STAINLESS STEEL
7 SEE NOTE #1 3 16 2 5Z0009 SCREW, SOCKET HEAD CAP, M6 X 25 MM LONG, STAINLESS STEEL W/ SEALANT
SEE NOTE #5 1 1
17 8 5Z0010 SCREW, SOCKET HEAD CAP, M6 X 16 MM LONG, STAINLESS STEEL W/ SEALANT
19 21
SEE NOTE #7 4 SEE NOTE #4 18 4 5Z0016 SCREW, HEX HEAD CAP, M10 X 35 MM LONG, STAINLESS STEEL W/ SEALANT
1
19 4 68PL-4-2 FITTING, MALE CONNECTOR, 1/8-27 MPT W/ THREAD SEALANT X 1/4 IN TUBE,
10 NICKEL PLATED BRASS
2
20 2 NJ-10F NUT, JAM - .625-18 UNF-2B
C 21 1 SC-M4-005 SCREW, SET,CUP POINT, M4 X 5 MM LONG, STAINLESS STEEL
C
17
TIGHTEN TO 6 FT-LBS 8 22 3 SH-M8-025 SCREW, SOCKET HEAD CAP, M8 X 25 MM LONG, STAINLESS STEEL
15 23 1 SH-M8-035 SCREW, SOCKET HEAD CAP, M8 X 35 MM LONG, STAINLESS STEEL
2
6
1

13
2

SEE NOTE #6 20
2
SEE NOTE #1
F
8
1 23 11
1 4 SEE NOTE #2
4 TIGHTEN TO 13 FT-LBS
1
5
1

B
16
2 B

1
1

2
1

22
SEE NOTE #2 3
UNLESS OTHERWISE SPECIFIED
TIGHTEN TO 13 FT-LBS X/X u 1/64
11
A 4
12 17
.X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
6 8 TIGHTEN TO 6 FT-LBS ANGLES u .5 v

D
NOTES:
TYPE:
125
SURFACES ASSEMBLY
1. APPLY CJ# 10100, DOW CORNING MOLYKOTE 33 MEDIUM GREASE. THE DESIGN CONTAINED IN THIS DRAWING
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
TITLE:

2. USE BLUE SEMI-PERMANENT THREAD LOCKING AGENT AFTER CLEANING THE THREADS. PROPERTY OF COLD JET, LLC. IT IS NOT TO BE FEEDER, VARIABLE FEED ROTARY, 4PPM, AERO 40FP
USED IN ANY WAY DETRIMENTAL TO THE
STOCK SIZE: PROJECT:
3. ALL HARDWARE MUST BE 18-8 STAINLESS STEEL UNLESS NOTED OTHERWISE. MANUFACTURABILITY REVIEW: DATE: MATERIAL:

FI00070
INTERESTS OF COLD JET, LLC.
-
4. USE RED PERMANENT THREAD LOCKING AGENT AFTER CLEANING THE THREADS. COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE

5. LABEL THE FEEDER ASSEMBLY WITH THE PART NUMBER AND REVISION. REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- -
6. TORQUE NUT TO 24 FT-LBS WITH LIGHT OIL ON THREADS.
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT rdrusell
DATE:

2/18/2016
PART NUMBER:
1 OF 1
REVISION:
7. TORQUE 1/8 NPT FITTINGS TO 5 FT-LBS WITH DRY THREADS.
2E0828 F
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. wbischoff 02\25\2015

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE Item Quantity Document Revision Title
A
MADE ELECTRICAL PA RTS REFERENCE, ABANDON G1/G2
SINCE THE BOM AND VISUAL IS THE SAME
6/2/2015 Number Number
B NEW LOGO, REVISED 3P0493-A TO REV -B 6/13/2015
1 1 3P0493 B CONTROL PLATE, ELECTRIC, SCREENPRINT W/ CLEARCOAT, SST,
AERO 40FP
2 1 3P0658 IDENTITY PLATE, AERO 40FP, STAINLESS
3 1 4I0268 C GAUGE, PANEL MOUNT, 2 IN DIAMETER, 0-300 PSI, 1/4-18 MPT
4 1 AQ70-P-4-4 ELBOW, PRESTOLOK - 1/4 TUBE x 1/4 FNPT
D 1
1
D
5 7 PP-M3-008 SCREW, PAN HEAD, PHILLIPS - M3 X 8MM LONG, STAINLESS STEEL
6 2 PP-M4-010 SCREW, PANHEAD PHILLIPS - M4 X 10MM LONG, STAINLESS STEEL

C 4 C
1
6
2

3
1

B 5 B
7

2
1
5 5
7 7

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
NOTE: THE DESIGN CONTAINED IN THIS DRAWING
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
TITLE:

CONTROL PLATE, VARIABLE SPEED W/ MOUNTED COMPONENTS, AERO 40FP

1. ELECTRICAL TAPE SHOULD BE PLACED ON THE BACK OF THE PLATE DIRECTLY BELOW THE POTENTIOMETER CONNECTIONS. MANUFACTURABILITY REVIEW: DATE:
USED IN ANY WAY DETRIMENTAL TO THE
INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

2. APPLY PERMANENT THREAD SEALING COMPOUND TO ALL NPT FITTINGS IF NOT PRE-APPLIED. - PD00257
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
3. SEE TOP LEVEL SCHEMATIC AND BOM FOR ELECTRICAL REFERENCE PARTS. 120 V AND 230V PART NUMBERS MAY BE DIFFERENT. REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT MRIVIR
DATE:

6/13/2015
PART NUMBER:
1 OF 2
REVISION:

2G1441 B
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. mrivir 03\30\2015

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE Item Quantity Document Title
A FOR INITIAL RELEA SE 7/5/2017
Number Number
1 1 2G1441 CONTROL PLATE, VARIABLE SPEED W/ MOUNTED COMPONENTS, AERO 40FP
2 1 2I0215 VALVE, SOLENOID 2 STATION W/MOUNTED COMPONENTS
3 1 2I0333 FILTER/REGULATOR, AIR PREPARATION
D 4 1 3G0287 ENCLOSURE, ELECTRICAL, BLACK, PAINTED STEEL, AERO 40FP D
1 5 1 3J0897 PLATE, NOZZLE HANGER
1
6 2 4G1007 CORD GRIP, 5-10 MM CORD RANGE, PG11, BLACK, POLYMER
7 2 4G1008 LOCKNUT, PG11, BLACK, POLYMER
8 1 4I0475 VALVE, PRESSURE RELIEF, 1/4 MNPT x 250 PSI
4
1
9 8 BH-M6-010 SCREW, BUTTON HEAD CAP, M6 x 1 x 10MM LONG, STAINLESS STEEL
10 4 BH-M6-012 SCREW, BUTTON HEAD CAP, M6 X 12 MM LONG, STAINLESS STEEL
11 6 PP-M4-010 SCREW, PHILLIPS PAN HEAD, M4 X 10 MM LONG, STAINLESS STEEL
12 4 WF-M6 WASHER, STANDARD FLAT, M6, STAINLESS STEEL

11
6
C SEE NOTE #4
C

2
1 SEE NOTE #3

12
4

10
SEE NOTE #4 4

B B

8
1
9
SEE NOTE #4 8

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
5 3 SURFACES
125
ASSEMBLY
1 1 THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE ENCLOSURE, ELECTRICAL W/ CONTROL PLATE & MOUNTED COMPONENTS, AERO 40FP
NOTE: MANUFACTURABILITY REVIEW: DATE:
USED IN ANY WAY DETRIMENTAL TO THE
MATERIAL: STOCK SIZE: PROJECT:

P00382Q
INTERESTS OF COLD JET, LLC.

1. APPLY PERMANENT THREAD SEALING COMPOUND TO ALL NPT FITTINGS IF NOT PRE-APPLIED. -
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:

2. SEE TOP LEVEL SCHEMATIC AND BOM FOR ELECTRICAL REFERENCE PARTS. 120 V AND 230 V PART NUMBERS MAY BE DIFFERENT.
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
2G1444-C - -
3. USE BLUE SEMI-PERMANENT THREAD LOCKING AGENT AFTER CLEANING THE THREADS.
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT -
DATE:

-
PART NUMBER:
1 OF 2
REVISION:

4. APPLY ANTI-SEIZE COMPOUND AFTER CLEANING THE THREADS. 2G1489 A

BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. lkain 07\05\2017

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE
Item Number Quantity Document Number Title
A REMOVED (2) SH-M4-035 BOLTS 6/25/2009
B REMOVED G1 & G2 ASSEMBLY, REMOVED COILS 6/13/2015
1 2 169PL-4-4 FITTING, ELBOW, MALE SWIVEL, 1/4 IN. TUBE X 1/4 IN. NPT, PLATED BRASS
REPLACED 4X SH-M4-040 WITH 3X SH-M4-035, ADDED 3X WF-
C
M4.
2/12/2016 2 1 169PL-4-6 ELBOW, PRESTOLOK, 1/4 TUBE x 3/8 MNPT
3 2 4I0116 VALVE, SOLENOID - 5/2 x 1/4 NPT
4 2 4N0321 FITTING, 3 OUTLET SWIVEL ELBOW, 1/4 IN OD TUBE X 1/4 MPT, COMPOSITE BODY
5 1 5I0007 MANIFOLD, 2 STATION, MODIFIED
6 1 6HHP-S FITTING, 3/8 NPT PLUG, PLATED STEEL
D 7 3 SH-M4-035 SCR, SCH CAP - M4 x .7 x 35mm Lg D
8 3 WF-M4 WASHER, STANDARD FLAT, M4, STAINLESS STEEL

4
2 1 3
2 2

C 8 7
3 3

2
1
C C

5
1

6
1

B B

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
VALVE, SOLENOID 2 STATION W/MOUNTED COMPONENTS
NOTE: MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

1. APPLY PERMANENT THREAD SEALING COMPOUND TO ALL NPT FITTINGS IF NOT PRE-APPLIED. - FI00070
COPYRIGHT© COLD JET, LLC. ALL RIGHTS
2. ASSEMBLE USING PROVIDED SCREWS AND O-RING KIT. SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE

3. SEE TOP LEVEL SCHEMATIC AND BOM FOR ELECTRICAL REFERENCE PARTS.
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT MRIVIR
DATE:

2/12/2016
PART NUMBER:
1 OF 1
REVISION:

2I0215 C
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. jcox 10\01\2001

1 2 3 4 5 6
 REVISION HISTORY
1 2 3 4 5 6
REV
A
DESCRIPTION
REPLACE 124470438 WITH 169PL-4-4
DATE
12/4/2007 Item Quantity Document Revision Title
B ADDED NOTES, REMOVED CRITICAL DIMENSION
UPDATED TO CURRENT REVISION STANDARDS
7/28/2008
6/1/2010
Number Number
C FIX NOTES, UPDATE TITLE. NO PART CHANGE 10/13/2010
CHANGE FITTINGS TO 68CA-4-4 5/5/2011 1 1 4I0446 A CYLINDER, AIR - 1.5" BORE x 2.0" STROKE, OS ROD
D CHANGED FITTINGS TO 4Z0922 BANJO WITH PRO-SEAL 10/4/2012

E
CHANGED FITTINGS TO 4Z0921, UPDATED TITLE, UPDATED
NOTES.
5/7/2015 2 2 4Z0921 FITTING. PUSH IN, 4 Tube X 1/4 MNPT,PLATED
BRASS

D D

SEE NOTE #1

2
E
2

C C

1
1

B B

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
NOTES: THE DESIGN CONTAINED IN THIS DRAWING
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
TITLE:

CYLINDER, THUMPER W/ FITTINGS

1. TORQUE FITTINGS TO 8 - 10 FT-LBS (10.8 - 13.6 NM). MANUFACTURABILITY REVIEW: DATE:
USED IN ANY WAY DETRIMENTAL TO THE
MATERIAL: STOCK SIZE: PROJECT:

PD00257
INTERESTS OF COLD JET, LLC.

2. APPLY PERMANENT THREAD SEALING COMPOUND TO ALL NPT FITTINGS IF NOT PRE-APPLIED. -
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
FIRST ARTICLE INSPECTION: DATE: APPROVED BY: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT RLD
DATE:

05/07/2015
PART NUMBER:
1 OF 1
REVISION:

2I0219 E
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. wbischoff 11\15\2007

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE Item Quantity Document Revision Title
A

B
REPLACED STRAIGHT FITTING 68PL4-2 WITH 90 DEG 169PL4-2

SEPERATED INTO TWO DIFFERENT ASSEMBLIES

2/16/2012

8/15/2012
Number Number
1 1 169PL-4-2 ELBOW, MALE SWIVEL - 1/4" TUBE x 1/8" NPT
2 3 169PL-4-4 FITTING, ELBOW, PRESTOLOK - 1/4 x 1/4 ,
3 1 215PN-4 NIPPLE, CLOSE - 1/4 NPT
D 4 1 2205P-4 CROSS - 1/4 FNPT D
5 5 1 4I0382 A FILTER/REGULATOR, GP - 1/4" PORTS, 0-150 PSI, w/o GA
1

2
3

3
1
C C

4
1

B B

1
1

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:

SURFACES
125
ASSEMBLY
TITLE:
THE DESIGN CONTAINED IN THIS DRAWING
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
FILTER/REGULATOR, AIR PREPARATION
STOCK SIZE: PROJECT:
MATERIAL:

CJBU022
INTERESTS OF COLD JET, LLC.
-
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
APPROVED BY: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE

NOTES: REPRODUCED, TRANSMITTED, TRANSCRIBED,

STORED IN A RETRIEVAL SYSTEM, OR
- - -
1. APPLY PERMANENT THREAD SEALING COMPOUND TO ALL NPT FITTINGS IF NOT PRE-APPLIED.
TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT dfritz
DATE:

8/15/2012
PART NUMBER:
1 OF 1
REVISION:

2I0333 B
BE ELECTRONIC, MECHANICAL, MAGNETIC,
OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. dfritz 02\16\2012

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE Item Quantity Document Title
A FOR INITIAL RELEASE 5/8/2018
B REPLACED 68PL-4-2 WITH 169PL-4-4 10/31/2019 Number Number
1 1 164PL-4 FITTING, PUSH TO CONNECT UNION TEE, 1/4 IN OD TUBE, NICKEL
PLATED BRASS
2 2 169PL-4-2 FITTING, PUSH TO CONNECT X NPT MALE ELBOW SWIVEL, 1/8-27 MPT
X 1/4 IN OD TUBE, NICKEL PLATED BRASS
D 3 3 169PL-4-4 FITTING, PUSH TO CONNECT X NPT MALE ELBOW SWIVEL, 1/4 IN OD D
TUBE X 1/4-18 NPT MALE, NICKEL PLATED BRASS
4 1 16F6X-S FITTING, 37 DEGREE SWIVEL X NPT SWIVEL CONNECTOR, 1 IN JIC
4 FEMALE X 1-11 1/2 NPT MALE, PLATED STEEL
1
5 1 24WLN-S FITTING, BULKHEAD LOCKNUT, 1 1/2 IN, 1 7/8-12 THREADS, PLATED
STEEL
6 1 3N0521 TUBE, INLET W/ FLANGE, 1 IN, STAINLESS STEEL, AERO 40FP
7 1 3P0691 LABEL, BLAST PRESSURE, ALUMINUM
1 3
1 3 8 1 4I0281 REGULATOR
11 9 8
1 1 1
7 9 1 4I0416 VALVE, FULL PORT BALL W/ PNEUMATIC ACTUATOR, 1 IN FPT, BRASS
1
10 1 4I0624 REGULATOR, PILOT OPERATED, 1-11 1/2 NPT FEMALE, 400 CFM
11 1 4N0130-3.00 NIPPLE, PIPE THREADED ON BOTH ENDS, 1-11 1/2 MNPT X 3 IN LONG,
STAINLESS STEEL
C 12* 2 IN 4N0173-BLK TUBING, .040 IN WALL X 1/4 IN OD, BLACK, NYLON C
B 3
3
13 1 4N0718 ADAPTER, 1" MNPT X 1" TUBE, ADJUSTABLE LENGTH
14 2 4Z0531 RIVET, BLIND 1/8 INCH DIA X .262 5000, .25 INCH, ALUMINUM
10
1

14
2

2
DIR 2
ECT
ION
OF
FLO
W
5
1
9
1
B B
13
1

6
1

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:

NOTE: SURFACES
125
ASSEMBLY
1. APPLY PERMANENT THREAD SEALING COMPOUND TO ALL NPT FITTINGS IF NOT PRE-APPLIED.
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE AIR, BLAST W/ MOUNTED COMPONENTS, LOW FLOW REGULATOR
2. PILOT REGULATOR INSTALLED ON ENCLOSURE DOOR
USED IN ANY WAY DETRIMENTAL TO THE
MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

- P00487P
3. PILOT PRESSURE REGULATOR INSTALLED WITH FITTINGS ON BOTTOM. FIRST ARTICLE INSPECTION: DATE: COPYRIGHT© COLD JET, LLC. ALL RIGHTS
RESERVED. NO PART OF THIS DESIGN MAY BE
DERIVED FROM: DATE: RELEASE DATE:
SHEET
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
2I0473 - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT R. KOCOL
DATE:

10/31/2019
PART NUMBER:
1 OF 2
REVISION:

2I0505 A
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. B. GEIGER 07\09\2019

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE Item Quantity Document Title
A
CHANGED 3J0841-C TO REV D, 3J0836 TO REV C, 2J0232 TO
REV C, REMOVED 4H0198, 4Z0403, 4Z0404, ADDED 3J0855-A, 9/19/2008
Number Number
4Z0624, 4Z0446, 2I0219-A, WO-M6
2
B 2I0219-A TO REV B 3/13/2009
1 1 1 2I0219 CYLINDER, THUMPER W/ FITTINGS
REVISED 3J0841-D TO REV -E, 4Z0603 TO REV -A, ADDED
C 9/29/2009
TORQUE AND THREAD LOCKING COMPOUND NOTES
D
ADD NOTE #3. UPDATE 3J0841-E WITH REV F AND 2J0232-C
3/19/2010
2 1 2J0653 LID, HOPPER W/ MOUNTED COMPONENTS, AERO 40FP
WITH REV D
E ADD NOTE #4, REMOVE NOTE CALLOUT ON NH-M6
REPLACE 2J0232-D WITH REV E
3/25/2010
3 1 3J0841 HOPPER, BLAST UNIT, 40 LB CAPACITY, STAINLESS STEEL, AERO 40
F REVISED 2J0232-D TO REV-F, REVISED 3J0841-F TO REV-G
REVISED 3J0865 TO REV-A, REVISED 3J0865-A TO REV-B
4/29/2010

22
4 1 3J0855 WEIGHT, THUMPER CYLINDER, PLATED STEEL
D G
RENAME 3J0836-C TO 3J1324
SEE REVISED DRAWING 5/5/2011
4 5 1 3J0865 SCREEN, STAINLESS STEEL, AERO 40 D
H REVISE ITEM 1 5/5/2011
J REVISED 2I0219-C TO REV -E, REVISED 2J0232-F TO REV -G 5/7/2015
23 6 1 3J1324 BRACKET, THUMPER MOUNTING, STAINLESS STEEL, AERO 40 SERIES
REPLACED 4Z0414-B WITH 4Z0693, NH-M6, WITH NH-M8
4
REPLACED (4) WL-M6 WITH 4Z0806, REMOVED WO-M6
20
7 1 3Z0054 PAD, HOPPER SEAL, WHITE, POLYMER
K UPDATED TORQUE SPEC, CHANGED LOCTITE TO ANTI-SEIZE 7/10/2015
4 SEE NOTE #2
M
N
UPDATED LID ASSEMBLY FROM 2J0232 TO 2J0653
REVISE 3Z0054-A TO REV -B.
8/4/2015
10/12/2015
8 4 4Z0062 SPRING, COMPRESSION, .026 WIDE X .360 DIAMETER X 1/2 IN LONG, STAINLESS STEEL
REPLACED 4X SH-M6-012 WITH 4X SH-M6-020, REATTACHED
P BALLOONS FOR 4X 4Z0806 AND NH-M8 HOPPER MOUNTING 2/12/2016 9 8 4Z0255 WASHER, BELLEVILLE DISC SPRING, .317 IN ID X 5/8 IN OD X .047 IN THICK, STAINLESS
Q
HARDWARE.
4Z1387 WAS 4Z0603 1/17/2019 STEEL
10 4 4Z0402 NUT, HEX, M10, CLASS 10
11 4 4Z0405 WASHER, BELLEVILLE DISC SPRING, .413 ID X .906 OD X .098 IN, STEEL
12 4 4Z0446 SCREW, SOCKET HEAD CAP, M10 X 30 MM LONG, CLASS 12.9
13 1 4Z0624 WASHER, WEDGE LOCK, 3/4 IN SCREW SIZE X 1.21 IN OD X .13 IN THICK, PLATED STEEL
14 4 4Z0806 WASHER, WEDGE LOCK, 5/16 IN AND M8 SCREW SIZE X .53 IN OD X .09 IN THICK,
STAINLESS STEEL
15 1 4Z1387 INSULATION, HOPPER W/ ADHESIVE BACK, AERO 40FP
5 16 8 BH-M8-020 SCREW, BUTTON HEAD CAP, M8 X 20 MM LONG, STAINLESS STEEL
1
17 4 NH-M8 NUT, HEX, M8, STAINLESS STEEL
C C
3 18 4 NL-M5 NUT, HEX W/ NYLON INSERT, M5, STAINLESS STEEL
1
Q 19 8 NL-M8 NUT, HEX W/ NYLON INSERT, M8, STAINLESS STEEL
15 20 4 SH-M6-020 SCREW, SOCKET HEAD CAP, M6 X 20 MM LONG, STAINLESS STEEL
1 SEE NOTE #3
21 4 SS-M5-06-012 SCREW, SOCKET HEAD SHOULDER CAP, M5 X 6 MM OD X 12 MM LONG, STAINLESS
STEEL
22 4 WF-M6 WASHER, STANDARD FLAT, M6, STAINLESS STEEL
23 4 WL-M6 WASHER, STANDARD LOCK, M6, STAINLESS STEEL

SEE NOTE #2 FOR MOUNTS 17

4
14 6
4 1

9
8
18
B 4
19 TORQUE TO 22.5 FT/LBS,
B
SEE NOTE #4, 16 8 8X M8 BOLTS
8X M8 BOLTS 8

8
4 4 TORQUE TO 70 FT/LBS,
1 1X THUMPER WEIGHT

7
1
13
1

21 SEE NOTE #1
SEE NOTE #4 4
UNLESS OTHERWISE SPECIFIED
10 11 1 X/X u 1/64
A 4 4 1
12 SEE NOTE #2,
.X
.XX
u .1
u .01 A
4 TORQUE TO 40 FT/LBS,
4X M10 BOLTS
.XXX
.XXXX
u .005
u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE HOPPER, BLAST UNIT W/ MOUNTED COMPONENTS, AERO 40FP
NOTES: MANUFACTURABILITY REVIEW: DATE:
USED IN ANY WAY DETRIMENTAL TO THE
INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

1. APPLY RED PERMANENT THREAD LOCKING AGENT AFTER CLEANING THE THREADS. - CRE20180615
COPYRIGHT© COLD JET, LLC. ALL RIGHTS
2. APPLY BLUE SEMI-PERMANENT THREAD LOCKING AGENT AFTER CLEANING THE THREADS. FIRST ARTICLE INSPECTION: DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
DERIVED FROM:

-
DATE:

-
RELEASE DATE:

- SHEET
3. APPLY CJ# 15026, METALLIC DUCT TAPE TO SEAL THE SEAMS OF THE INSULATION. FUNCTIONAL VERIFICATION: DATE:
STORED IN A RETRIEVAL SYSTEM, OR
TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
DATE: PART NUMBER:
1 OF 1
4. APPLY ANTI-SEIZE AFTER CLEANING THE THREADS. IN ANY FORM OR BY ANY MEANS, WHETHER IT M. BISHOP 1/17/2019 REVISION:

2J0235 Q
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. AKASTEN 07\18\2007

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE Item Quantity Document Title
A
REPLACE 3J2620, 4Z0575 AND 4Z0576 WITH 2J0671-A;
REMOVE REVISION COLUMN FROM BOM, UPDATE NOTES
2/12/2016
Number Number
1 1 2J0671 PANEL, RIGHT SIDE W/ FASTENERS
2 1 3J0830 PLATE, LOGO BACKING, BLUE
3 1 4Z0670 HOOK, APPLICATOR HANGER
D 4 2 NL-M4 NUT, NYLOK - M4, STAINLESS STEEL D
3 6
1 2 5 4 NL-M5 NUT, NYLOK - M5, STAINLESS STEEL
6 2 PP-M4-012 SCR, PNH PH - M4 x .7 x 12mm Lg.
7 2 WO-M4 WASHER, OVER SIZED, FLAT - M4

7
2

4
2
SEE NOTE #2

1
A
C 1
C

5
4

SEE NOTE #1 2
1

B B

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
PANEL, RIGHT SIDE W/ MOUNTED COMPONENTS
MANUFACTURABILITY REVIEW: DATE: MATERIAL: STOCK SIZE: PROJECT:

FI00070
INTERESTS OF COLD JET, LLC.
-
NOTES: COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE

1. REMOVE THE PROTECTIVE COVER FROM THE SURFACE OF THE ACRYLIC SHEET THAT WILL CONTACT THE PANEL ONLY. REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- -
2. APPLY ANTI-SEIZE COMPOUND AFTER CLEANING THE THREADS.
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT rdrusell
DATE:

2/12/2016
PART NUMBER:
1 OF 2
REVISION:

2J0642 A
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. jwheeler 05\21\2015

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION
REPLACE 3J2618, 4Z0575 AND 4Z0676 WITH 2J0672-A;
DATE Item Quantity Document Title
A
REMOVE REVISION COLUMN; UPDA TE NOTES
2/15/2016
Number Number
1 1 2J0672 PANEL, LEFT SIDE W/ FASTENERS
2 1 3J0830 PLATE, LOGO BACKING, BLUE
3 4 NL-M5 NUT, NYLOK - M5, STAINLESS STEEL
D D

SEE NOTE #2

C C

1
1 A

3
4

2
SEE NOTE #1 1

B B

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PANEL, LEFT SIDE W/ MOUNTED COMPONENTS
NOTES: MANUFACTURABILITY REVIEW: DATE:
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
MATERIAL: STOCK SIZE: PROJECT:

FI00070
INTERESTS OF COLD JET, LLC.

1. REMOVE THE PROTECTIVE COVER FROM THE SURFACE OF THE ACRYLIC SHEET THAT WILL CONTACT THE PANEL ONLY. COPYRIGHT© COLD JET, LLC. ALL RIGHTS
-
SHEET
FIRST ARTICLE INSPECTION:
2. APPLY ANTI-SEIZE COMPOUND AFTER CLEANING THE THREADS.
DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT rdrusell
DATE:

2/15/2016
PART NUMBER:
1 OF 2
REVISION:

2J0643 A
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. jwheeler 05\21\2015

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION
REPLACE 3J2622, 4Z0575 AND 4Z0576 WITH 2J0673-A;
DATE Item Quantity Document Title
A
REMOVE REVISION COLUMN FROM BOM, UPDATE NOTES
2/12/2016
Number Number
1 1 169PL-4-2 FITTING, PUSH TO CONNECT X NPT MALE ELBOW SWIVEL, 1/8-27 MPT X
1/4 IN OD TUBE, NICKEL PLATED BRASS
2 1 2J0673 PANEL, FRONT W/ FASTENERS
3 1 3P0446 LABEL - BLEED DOWN
D D
4 1 4I0055 VALVE, BALL 2 WAY, 1/8-27 FPT, BRASS W/ POLYMER HANDLE
5 4 4Z0531 RIVET, BLIND 1/8 INCH DIA X .262 5000, .25 INCH, ALUMINUM

2
C 1 A C

5
4
3
1

B B
1
1
4
1

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
PANEL, FRONT W/ MOUNTED COMPONENTS
MANUFACTURABILITY REVIEW: DATE: MATERIAL: STOCK SIZE: PROJECT:

FI00070
INTERESTS OF COLD JET, LLC.
-
NOTES: FIRST ARTICLE INSPECTION: DATE: COPYRIGHT© COLD JET, LLC. ALL RIGHTS
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
DERIVED FROM:

-
DATE:

-
RELEASE DATE:

- SHEET
1. APPLY PERMANENT THREAD SEALING COMPOUND TO ALL NPT FITTINGS IF NOT PRE-APPLIED. FUNCTIONAL VERIFICATION: DATE:
STORED IN A RETRIEVAL SYSTEM, OR
TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
DATE: PART NUMBER:
1 OF 2
IN ANY FORM OR BY ANY MEANS, WHETHER IT rdrusell 2/12/2016 REVISION:

2J0644 A
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. jwheeler 05\21\2015

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE Item Quantity Document Title
Number Number
SEE NOTE #3 SEE NOTE #2 & #4 1 1 3J0888 LOCK, LID SCREEN, STAINLESS STEEL
2 1 3J2633 NUTPLATE, UPPER HOPPER LID HINGE, STAINLESS STEEL
10 6 3 1 3J2645 LID, HOPPER, BLACK POLYMER, AERO 40FP
4 1
D 4 1 3J2646 VENEER, HOPPER LID, SST, AERO 40FP D
5 1 3J2669 PLATE, HOPPER LID SPACER, POLYMER, AERO
7
1
6 1 3P0466 LABEL, LOGO, ALUMINUM
13 7 1 3P0482 LABEL, SAFETY WARNINGS
10
4 8 9 in 4Z0441 STN STEEL WIRE ROPE, 3/64 DIA
1
9 2 4Z0442 CRIMP, OVAL SLEEVE, 3/64" WIRE
12
4 10 4 4Z0531 RIVET, BLIND 1/8 INCH DIA X .262 5000, .25 INCH, ALUMINUM
11 45 IN 4Z0625 SEAL, WEATHERSTRIP, 5/16” THK 19/32” WD, EPDM RUBBER
12 4 4Z1120 SCREW, PHILLIPS FLAT HEAD, M6 X 12 MM LONG, STAINLESS STEEL, BLACK OXIDE
3 13 10 4Z1126 SCREW, PHILLIPS FLAT HEAD PLASTITE, 6-19 X 3/8 IN LONG, STAINLESS STEEL
SEE NOTE #5 1
14 1 5Z0073 HINGE, PIANO, 3" WIDE, 1/2" KNUCKLE, MODIFIED, 11.5" LONG, SST
15 2 SH-M6-010 SCREW, SOCKET HEAD CAP, M6 X 10 MM LONG, STAINLESS STEEL
C
11
45 IN C

BACK
14 LOCATE ON CENTER AS SHOWN
1

1
1

B B
5
1

7.26
15
2

SEE NOTE #1
9
2
2
1
8
9 in
FRONT

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
NOTES: .XXXX
ANGLES
u .0005
u .5 v

D
TYPE:

1. USE BLUE SEMI-PERMANENT THREAD LOCKING AGENT AFTER CLEANING THE THREADS. SURFACES
125
ASSEMBLY
2. APPLY CJ# 15084, DOW CORNING 732 MULTIPURPOSE SILICONE. THE DESIGN CONTAINED IN THIS DRAWING
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
TITLE:

LID, HOPPER W/ MOUNTED COMPONENTS, AERO 40FP

3. MAKE SURE LABEL GRAPHICS FACE TOWARDS FRONT. MANUFACTURABILITY REVIEW: DATE:
USED IN ANY WAY DETRIMENTAL TO THE
INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE:

-
PROJECT:

PD00287
4. MAKE SURE LABEL GRAPHICS FACE TOWARDS BACK. COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE

5. REMOVE ALL MOLD RELEASE, SCUFF INSIDE OF TROUGH WITH ROTARY FLAP WHEEL, CLEAN REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
WITH BESTINE, APPLY ADHESIVE IN UNIFORM BEAD, INSTALL WEATHERSEAL, APPLY CURING FIXTURE
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT -
DATE:

-
PART NUMBER:
1 OF 1
REVISION:

2J0653
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. bgroves 07\31\2015

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE Item Quantity Document Title
A FOR INITIAL RELEASE 5/21/2018 Number Number
1 1 3J3286 FRAME, BLAST UNIT, BLACK , PAINTED STEEL, AERO 40FP
2 12 4Z0574 QUARTER TURN FASTENER, RECEPTACLE, M6, PLATED STEEL
3 2 4Z0591 CASTER, SWIVEL - 8"
4 2 4Z0592 WHEEL, STEEL RIM, FLAT FREE,
D 5 4 4Z0693 MOUNT, VIBRATION, M8 MALE, 1 1/4 IN DIAMETER X 3/4 IN, RUBBER W/ METAL CORE D
6 2 80174-002 CLIP, RUE - 5/8" AXLE
5
SEE NOTE #4 4 7 2 80174-003 CLIP, HITCH PIN
8 8 BH-M8-016 SCREW, BUTTON HEAD CAP, M8 X 16 MM LONG, STAINLESS STEEL
9 4 WF-10 WASHER, STANDARD FLAT, 5/8 IN, STAINLESS STEEL
10 8 WF-M8 WASHER, STANDARD FLAT, M8, STAINLESS STEEL
11 8 WL-M8 WASHER, STANDARD LOCK, M8, STAINLESS STEEL

C C
2
12
SEE NOTE #2

4
2

9
4

1 6
B
1 2
DETAIL A B
7
2

9
4

3
2

10
8

11
8
UNLESS OTHERWISE SPECIFIED
X/X u 1/64
A SEE NOTE #3
8
.X
.XX
u .1
u .01 A
8 .XXX
.XXXX
u .005
u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
NOTES:
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE FRAME, BLAST UNIT W/ HANDLES AND CASTERS, AERO 40FP
1. ALL HARDWARE IS TO BE 18/8 SST. UNLESS OTHERWISE SPECIFIED. MANUFACTURABILITY REVIEW: DATE:
USED IN ANY WAY DETRIMENTAL TO THE
INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE:

-
PROJECT:

CRE20180522
2. TABS ON QUARTER TURN RECEPTACLES ARE TO BE ORIENTED IN A VERTICAL DIRECTION. FIRST ARTICLE INSPECTION: DATE: COPYRIGHT© COLD JET, LLC. ALL RIGHTS
RESERVED. NO PART OF THIS DESIGN MAY BE
DERIVED FROM: DATE: RELEASE DATE:
SHEET
3. APPLY RED PERMANENT THREAD LOCKING AGENT AFTER CLEANING THE THREADS. REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
2J0221-E - -
4. APPLY BLUE SEMI-PERMANENT THREAD LOCKING AGENT AFTER CLEANING THE THREADS.
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT -
DATE:

-
PART NUMBER:
1 OF 2
REVISION:

2J0771 A
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. lkain 05/21/2018

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE Item Quantity Document Revision Title
A FOR INITIAL RELEA SE 8/13/2018 Number Number
1 1 169PL-4-4 FITTING, PUSH TO CONNECT X NPT MALE ELBOW SWIVEL, 1/4 IN OD TUBE
X 1/4-18 MPT, NICKEL PLATED BRASS
2 1 16FTX-S FITTING, 37 DEGREE FLARE X NPT MALE CONNECTOR, 1 IN JIC MALE X
1-11 1/2 NPT MALE, PLATED STEEL
3 1 2HHP-S FITTING, NPT HOLLOW HEX PIPE PLUG, 1/8-27 NPT MALE, PLATED STEEL
D 4 1 2J0771 A FRAME, BLAST UNIT W/ HANDLES AND CASTERS, AERO 40FP
D
5 1 2N0206 A PIPE CLAMP, 1 1/4 IN.
6 2 3J2641 CORNER, TOP FRAME, BLACK, POLYMER
5 7 1 3N0074 B TUBE, OUTLET, STAINLESS STEEL, AERO 40
1
13 8 2 4E0124 A FLANGE, SPLIT 1 1/4 IN TUBE MOUNTING, CODE 61, PLATED STEEL
1
9 1 4N0419 FITTING, NPT X NPS 45 DEGREE MALE PIPE SWIVEL ELBOW, 1-11 1/2 MPT
X 1-11 1/2 NPS FEMALE SWIVEL, PLATED STEEL
SEE NOTE #3 12
8 7 10 1 4P0031 LABEL, CRUSH HAZARD - KEEP HANDS CLEAR
1
11 1 4Z0051 CHECK, HOSE WHIP, 1/2 INCH to 1-1/4 INCH
12 8 4Z0616 SCREW, M6 X 16 CHEESE HEAD, NYLON
6
2 13 1 5N0003 A UNION, REDUCING, #20 JICM x #16 JICM, STEEL
14 2 HH-04C-044 SCREW, HEX HEAD CAP, 1/4-20 X 2 3/4 IN LONG, STAINLESS STEEL
15 8 SH-M10-025 SCREW, SOCKET HEAD CAP, M10 X 25 MM LONG, STAINLESS STEEL
1
1
C C
15 SEE NOTE #5
8

SEE NOTE #1 10
1

8
2

3 1
1 1

14 SEE NOTE #4
2 3
B
1
B

A
2
1

9
1
4
1

11
1
DETAIL A: INSIDE VIEW OF FRAME
UNLESS OTHERWISE SPECIFIED
X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
NOTES: .XXXX
ANGLES
u .0005
u .5 v

D
TYPE:

1. APPLY THE SAFETY LABEL ON THE OUTSIDE OF THE FRAME MEMBER WHERE THE THUMPER WEIGHT IS LOCATED. USE SURFACES
125
ASSEMBLY
MULTIPURPOSE SPRAY ADHESIVE ON THE LABEL. THE DESIGN CONTAINED IN THIS DRAWING
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
TITLE:

FRAME, BLAST UNIT W/ MOUNTED COMPONENTS, AERO 40FP

2. APPLY PERMANENT THREAD SEALING COMPOUND TO ALL NPT FITTINGS IF NOT PRE-APPLIED. MANUFACTURABILITY REVIEW: DATE:
USED IN ANY WAY DETRIMENTAL TO THE
INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE:

-
PROJECT:

CRE20180522
3. DO NO OVER TORQUE PLASTIC SCREWS. COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE

4. APPLY ANTI-SEIZE COMPOUND AFTER CLEANING THE THREADS. REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
2J0208-J - -
5. APPLY SEMI-PERMANENT BLUE THREAD LOCKING AGENT AFTER CLEANING THE THREADS.
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT -
DATE: PART NUMBER:
1 OF 1
REVISION:

2J0772 A
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. RDRUSELL 08\13\2018

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE

42
A UPDATE BOM TO MATCH AS BUILT 6/10/2015

P1; ADD LINE 7 TRIGGER DISABLE LIGHT, REMOVE

B 6/23/2015
APPLICATOR, P3; ADD 4G1259 & 4G1557, ADD TAG NUMBERS
FIRST ARTICLE BUILD: P1; ADD TERMINAL LINE 14, TD19 BRN
SETTING 1.10 WAS 6-60, P2; ADD GROUND LABELS, ADD

YEL/WHT(55) - 43
YEL(11) - WHT/BRN(44)
42 - BRN
118VAC TO 140VAC or 240VAC TO 285VAC
C 7/8/2015
TRIPPLE-STACK TERMINAL CHART, ADD END CAP, P3; ADD
4G0063, 13488, WO-M4, UPDATED QTYS
YEL
11

High Voltage Input

P1; MOVE POWER ON LIGHT FROM LINE 5 TO LINE 14, NOW
D 7/21/2015
TURNS OFF WHEN TRIGGER DISABLED
E
P3; REMOVE (1) HOLE PLUG 4G0366, ADD (2) SOLENOID COILS
4I0279
9/10/2015 ORG
P1; VFD30 WAS VFD51, PWS12 WAS PWS24, LINE 19 22
D REMOVE 'SET @ 15 SEC', 10K OHMS WAS 1K, P2; PWS12
D

30

29

28

27

26

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

1
F WAS PWS24, ADD HARDWARE, P3; UPDATE QTY 4G0063 & 10/7/2015
4G1358, REMOVE 4G0709, 4G0495, 4G1358, 4G1127, UPDATE RED
G
TAG NUMBERS
P3: 4G0063 QTY 1 WAS 2, ADD RNB-C QTY 1 2/19/2016
33
H ADDED INITIAL BUILD TRANSFORMER TAPPING 8/22/2018
WHT/BRN
44

1L1
YEL/WHT

L1
BLK

L1
35

34

33

32

31

55

11

41

CB2
CR6 151

10 AMP

XF3
131

L1

AMP SUPPLY
ORG/WHT

CONSTANT

RED 16awg
7

(Initial Build)
PWS12
66
10 6

RED #16 AWG

CR11

6 10

to 31
CR6
RED/WHT

-
5
CR11

L2
SPEED POT

77
10K OHMS

50ma
FEEDER

C
9

VFD30

H
FU8
315
12

VR33

6.3A
CR6

FU4
152

43
311

B
141 PJ11 - D
8

2 10
CR12

to 31
9
CR12 153
351

PJ11 - A

42

H
341

332

321

ORG

RED
331

316

61

42
BRN X1
APPLICATOR
WHT
RED

BLK

BLU

BLU

120 VAC
FOR SPECIFIC SCHEMATIC
SEE APPLICATOR INFORMATION
BRN

91

81

BLK H1

ORG/WHT(66) - 43
ORG(22) - WHT/BRN(44)
42 - BRN
110VAC TO 128VAC or 220VAC TO 260VAC
YEL

Medium Voltage Input

RL

RM

RH

SC

S2

S1

10

STF

SD

STR

C 11 C
L
L1 LINE FILTER N1

H3
ORG
291

22
L1
VFD30

LF27

H2
TRIGGER
DISABLE
RED

PB6
292

RED

A1

A1
L2

33

H4 WHT/BLU
H3 BLU
H2 WHT/BLK
H1 BLK
TD19
TD19

H4 WHT/BLU
PE

WHT/BRN

XF3
A2
N

44

18
RUN

AM
SE
W

C
V

63
YEL/WHT
41

61

55

H
5

1
#16 AWG Y/G

201

XF3
ORG/WHT

5 9

3 11
CR11
from 6
34W

from 6
34U

CR6

43
34V

3
66

6
RED/WHT

L2
PJ11 - E

PJ11 - C

PJ11 - B
WHT
PJ20 - 1

PJ18 - 1

WHT

L2
151

BLK
GRN
77

XF8
4
WHT #16 AWG

7 92

WHT 16awg
64
MOT35

43
13

13

71
1
SOL20 PJ20 - 2

SOL18 PJ18 - 2

CR12

CR11
TD17

GND
#16 AWG BLK
3 PHASE

MOTOR
ROTOR

RED
230VAC
1/4 HP

GND

GND
13

FEEDER

CHASSIS
14

14
2

42
LT14

GND

GND
PB6

CR6
G

14

SP2
BRN

RED/WHT(77) - 43
RED(33) - WHT/BRN(44)
42 - BRN
100VAC TO 115VAC or 200VAC TO 230VAC
B YEL B

GND
OP-PANEL

SUB-PANEL
11

Low Voltage Input

RAM ROD
NC 20
NO
TIMER

ORG

ON LIGHT

TRANSFORMER
RAM ROD
THUMPER &

SOLENOID
BLAST AIR

HOUR METER

NC 15,31
NO
RELAY
ICE BLAST
POWER

NC
NO 7,13,15,35
RELAY #1
TRIGGER DISABLE
NC 5
NO 15,31
RELAY
TRIGGER

TRIGGER
SOLENOID

DISABLE
24VAC; 6VA
1. Pr. Settings
77 1
79 2
267 1
126 60.00
125 61.00
90 10.99
80 0.186
73 1
34 2.99
33 0
32 3
31 10
18 60
9 1.12
8 0.4
71
6 60
5 60
4 60
1 60
02

MTR SETTINGS

22
RED
33
WHT/BRN
44
OPERATOR PANEL TO A GROUND.
-USING A BOND CABLE, BOND THE

UNLESS OTHERWISE SPECIFIED.

RESPECTIVE TO POWER AND COMMON
-ALL WIRE COLOR IS RED & WHITE

OTHERWISE SPECIFIED.
-ALL WIRES ARE 18AWG UNLESS
NOTE:

SINK YEL/WHT
55
5
1.10
-----
1.5
0.1-1
TD19 SETTING

ORG/WHT
V

XF3
SW8

66
RED/WHT
I

SOURCE
77

43
UNLESS OTHERWISE SPECIFIED
X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
SCHEMATIC AND BOM, ELECTRICAL, 120VAC, AERO 40FP
MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

- CRE20180725
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SCHEMATIC
SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT mbishop
DATE:

8/22/2018
PART NUMBER:
1 OF 3
REVISION:

6G0310 H
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. mbishop 05\19\2015

1 2 3 4 5 6
 1 2 3 4 5 6

43 43 43 43 D
top
91 - - 61 REFERENCE:
middle WI-06
D 131 - - 351
bottom
WF-06
NL-06C D

C
MNTG BOLTS

D A A A A D REFERENCE:
PP-M4-010
WL-M4
WO-M4

B
B B MNTG BOLTS
REFERENCE:
PP-M4-010
WL-M4

1L1
1L2
41
41
FU8

FU4
LF27 TD19 CR6 CR11 CR12

A
C REFERENCE:
GRN SCREW C
4G0743
WI-E
RNR-E

B
B
NOTE - RING LUG GOES
B B BETWEEN SCREW AND
XF8 WASHER
PWS12

VFD30
B

B B
B B
A A A

D D

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
SCHEMATIC AND BOM, ELECTRICAL, 120VAC, AERO 40FP
MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

- CRE20180725
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

PANEL LAYOUT
SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT mbishop
DATE:

8/22/2018
PART NUMBER:
2 OF 3
REVISION:

6G0310 H
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. mbishop 05\19\2015

1 2 3 4 5 6
 1 2 3 4 5 6

ITEM USER1 TAGS QTY SUB DESC MISC1 53 4G1041 FU8 1 FUSE 50 MA
1 3G0085-A PJ11 1 CABLE MOLDED PANEL CONNECTION 54 4G1108-A TD19 1 RECYCLING TIMER
2 4G1501 50in. CABLE 16/4 W/ SHIELD 55 4G1218 FU4, FU8 2 FUSED TERMINAL BLOCK W/ BLOWN
3 4G0760 L1 180in. CABLE 16/3 TYPE OS 56 4G1224 FU4 1 FUSE 250 VAC 6.3A

D 4 4H0167 L1 1 NEMA PLUG 5-15 SPLASH PROOF 57 D

5 58
6 13464 2 FULL INS CONNECTOR 59 4G1400 4 TERMINAL BLOCKS 3 AMP
7 4G0750 VR33 1 KNOB BLACK 60 4G1401 4 TERMINAL BLOCK JUMPER 10 POLE
8 4G1031 VR33 1 POTENTIOMETER 10K OHMS 61 4G1490 CR6 1 RELAY 240 V
9 4G1042 CB2 1 CIRCUIT SWITCH 62 4G1037 CR6,CR11,CR12 3 SOCKET RELAY
10 4G1044 CB2 1 CIRCUIT COVER 63 4G1038 CR6,CR11,CR12 6 RELAY CLIP
11 4G1155 PB6 1 BASE SW 1NC CONTACTS 22.5mm 64 CR11,CR12 2 RELAY CONTROL 24VAC 4 POLE
4G1529
12 4G1187 TD17 1 HOUR METER 240VAC 65 4G1588 VFD30 1 VFD CONTROLLER 230 VAC 1/2HP
13 4G1206 LT14 1 BASE LIGHT MODULE 220VAC LED 66 4H0200-A LF27 1 FILTER 10 AMP TRANSIANT
14 4G1255 LT14 1 PILOT HEAD LIGHT 22.5 mm 67 RNR-E 7 LUG, RING #10, 18-20AWG
15 4G1256 LT14 1 PILOT LIGHT BASE 68 FNR-C 5 LUG, FORK 22-18 #6 STUD
16 4G1307 2 CONNECTOR 18-22 AWG 69 RNB-E 3 LUG, RING #10, 14-16 AWG
17 4G1502 PB6 1 PUSHBUTTON 70 WF-M4 2 WASHER, FLAT M4
18 4I0279 SOL18, SOL20 2 71 WI-E 8 WASHER, LOCK
COIL, SOLENOID 220 VAC, 50/60 Hz
72 WL-M4 12 WASHER, LOCK M4
19 4G1793 1 CORD GRIP
73 PP-M4-010 10 SCREW, 10mm PHILLIPS PAN HEAD
20 4G1794 1 LOCKNUT
74 NL-06C 4 NUT, NYLON, 3/8"
21 4G1007 2 GRIP CORD PG11
75 WI-06 4 WASHER, LOCK, 3/8" INTERNAL TOOTH
22 4G1008 2 LOCKNUT PG11
76 WF-06 4 WASHER, FLAT, 3/8"
C 23 4G1009 1 GRIP CORD PG16
77 WL-08 1 WASHER, LOCK 1/2 IN
C
24 4G1010 1 LOCKNUT PG16
78 HH-08C-016 1 SCREW, 1/2 - 13 X 1" HEX HEAD CAP
25 4I0152-A PJ18, PJ20 2 CABLE 6' DIN "I"
79 PP-M3-008 2 SCREW PHILLIPS PAN HEAD
26 4P0021 2 LABEL PROTECTIVE GROUND
4P0023A 1 LABEL 80 4Z0417-A 4 SCREW, #6-19 x 1/2" PHILLIPS PAN HEAD
27 EARTH GROUND GRAPHIC
81 4G0743 7 SCREW 10-32 x3/8
28 4G0063 1 END CLAMP
82 PP-M4-012 2 SCREW, 12mm PHILLIPS PAN HEAD
29 RNB-C 1 LUG, NYLON INSULATED #6 STUD, 14-16AWG, BLUE
83 4G1259 PB6 1 MODULE, PUSHBUTTON LT. BLUE, 230 V
30
WEATHERSTRIP INSULATION 84 4G1557 1 CONTACT BLOCK, NO. 10 AMP, 600 V
31 4Z0045 76in. PB6
32 85 13488 10 CONNECTOR, CABLE END, #18, RED
33 4G1358 11 CONNECTOR, INSULATION DISPLACEMENT, 16-22AWG 86 WO-M4 2 WASHER, OVERSIZED, M4XM12 OD.
34 4G1039-A XF8 1 TRANSFORMER 6VA 230/115VAC
35 2H0020 XF3 1 TRANSFORMER 1KVA 120/230 VAC
36 4G1814 PWS12 1 LED POWER SOURCE
37 3G0183 PWS12 1 POWER SUPPLY BRACKET
38 3G0208 1 SUB-PANEL
39 4G0058 4 TERMINAL BLOCK #22 - #10 AWG
40
41 4G0066 2
HORIZONTAL JUMPER BAR
B 42 4G0068 11in. DIN TRACK B
43 4G0081 50in. CABLE 3 COND.
44 4G0084-BL 120in. WIRE
45 4G0084-R 240in. WIRE
46 4G0084-W 100in. WIRE
47 4G0423-B 40in. WIRE
48 4G0423-W 6in. WIRE
49 4G0423-Y/G 40in. WIRE
50 4G1361 5 CONNECTOR, INSULATION DISPLACEMENT, 16-22AWG, T
51
52

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
SCHEMATIC AND BOM, ELECTRICAL, 120VAC, AERO 40FP
MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

- CRE20180725
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

BILL OF MATERIAL
SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT mbishop
DATE:

8/22/2018
PART NUMBER:
3 OF 3
REVISION:

6G0310 H
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. mbishop 05\19\2015

1 2 3 4 5 6
 1 2 3 4 5 6
REVISION HISTORY
REV DESCRIPTION DATE

42
A UPDATE BOM TO MATCH AS BUILT 6/10/2015

P1; ADD LINE 7 TRIGGER DISABLE LIGHT, REMOVE

B 6/23/2015
APPLICATOR, P3; ADD 4G1259 & 4G1557, ADD TAG NUMBERS
FIRST ARTICLE BUILD: P1; ADD TERMINAL LINE 14, TD19 BRN
SETTING 1.10 WAS 6-60, ADD WIRE COLOR LINE 3, P2; ADD

YEL/WHT(55) - 43
YEL(11) - WHT/BRN(44)
42 - BRN
118VAC TO 140VAC or 240VAC TO 285VAC
C GROUND LABELS, ADD TRIPPLE-STACK TERMINAL CHART,
ADD END CAP, P3; ADD 4G0063, 13488, WO-M4, UPDATED
7/8/2015
YEL
11

High Voltage Input

QTYS.
P1; MOVE POWER ON LIGHT FROM LINE 5 TO LINE 14, NOW
D 7/21/2015

E
TURNS OFF WHEN TRIGGER DISABLED
P3; REMOVE (1) HOLE PLUG 4G0366, ADD (2) SOLENOID COILS
9/10/2015
ORG
4I0279 22
D D
35

34

33

32

31

30

29

28

27

26

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10
P1; VFD30 WAS VFD51, PWS12 WAS PWS24, LINE 19

1
REMOVE 'SET @ 15 SEC', 10K OHMS WAS 1K, P2; PWS12
F WAS PWS24, ADD HARDWARE, P3; UPDATE QTY 4G0063 & 10/7/2015 RED
4G1358, REMOVE 4G0709, 4G0495, 4G1358, 4G1127, UPDATE
TAG NUMBERS
33
G P3: 4G1007 AND 4G1008 QTY 2 WAS 4, 4G0063 QTY 1 WAS 2 2/19/2016 WHT/BRN
H ADDED INITIAL BUILD TRANSFORMER TAPPING 8/23/2018
44

1L1
YEL/WHT

L1
BLK BRN

L1
11 7
55

41

CB2
CR6 151

131

L1

XF3
5 AMP
AMP SUPPLY
CONSTANT

RED 16awg
ORG/WHT

(Initial Build)
+

PWS12
66
10

RED #16 AWG

CR11

6 10

to 31
CR6
-
RED/WHT

5 9
CR11

L2
6
SPEED POT
10K OHMS

77

50ma
FEEDER

C
VFD30
FU8
315
12 8

VR33

H
6.3A

FU4
CR6

152
311

43
141 PJ11 - D
2
CR12

to 31
9 1
CR12 153
351

PJ11 - A
10

42
341

332

321

ORG

RED
331

316

61

BRN X1

42
APPLICATOR
WHT
RED

BLK

BLU

BLU

230 VAC
91

81
BRN

BLK
FOR SPECIFIC SCHEMATIC
SEE APPLICATOR INFORMATION

ORG/WHT(66) - 43
ORG(22) - WHT/BRN(44)
42 - BRN
110VAC TO 128VAC or 220VAC TO 260VAC
YEL

H1
RL

RM

RH

SC

S2

S1

10

STF

SD

STR

Medium Voltage Input

C 11 C
L
L1 LINE FILTER N1

H3
ORG
291

22
L1
VFD30

LF27

H2
TRIGGER
DISABLE
RED

PB6
292

A1
RED

A1
L2

H4 WHT/BLU
H3 BLU
H2 WHT/BLK
H1 BLK
TD19
TD19
33

H4
PE

XF3
WHT/BRN

WHT/BLU
A2
N

18
RUN

44
AM
SE
W

C
V

63
YEL/WHT
41

61

H
55

1
#16 AWG Y/G

XF3
201

3 11
ORG/WHT

CR11
from 6
34W

from 6
34U

CR6

43
34V

3
66

9
2

1L2
RED/WHT

PJ11 - E

PJ11 - C

PJ11 - B
WHT
BLK BLU

PJ20 - 1

PJ18 - 1

L2
BLK
151

GRN
77

XF8
4

CB2A
WHT #16 AWG

7 92

WHT 16awg

5 AMP
64
MOT35

43
13

13
1

71
SOL20 PJ20 - 2

SOL18 PJ18 - 2

CR12

CR11
TD17

GND
#16 AWG BLACK WIRE
3 PHASE

MOTOR
ROTOR

RED
230VAC
1/4 HP

GND

GND
FEEDER

CHASSIS
13
2

14

14

42
LT14

GND

GND
CR6
G

PB6
B

14

SP2
BRN

RED/WHT(77) - 43
RED(33) - WHT/BRN(44)
42 - BRN
100VAC TO 115VAC or 200VAC TO 230VAC
B YEL B

SUB-PANEL
GND
OP-PANEL
11

Low Voltage Input

RAM ROD
NC 20
NO
TIMER

ON LIGHT

TRANSFORMER
RAM ROD
THUMPER &

SOLENOID
BLAST AIR

HOUR METER

NC 15,31
NO
RELAY
ICE BLAST
POWER

NC
NO 7,13,15,35
RELAY #1
TRIGGER DISABLE
NC 5
NO 15,31
RELAY
TRIGGER

TRIGGER
SOLENOID

DISABLE
ORG

24VAC; 6VA
1. Pr. Settings
77 1
79 2
267 1
126 60.00
125 61.00
90 10.99
80 0.186
73 1
34 2.99
33 0
32 3
31 10
18 60
9 1.12
8 0.4
71
6 60
5 60
4 60
1 60
02

MTR SETTINGS

22
RED
33
WHT/BRN
44
OPERATOR PANEL TO A GROUND.
-USING A BOND CABLE, BOND THE

UNLESS OTHERWISE SPECIFIED.

RESPECTIVE TO POWER AND COMMON
-ALL WIRE COLOR IS RED & WHITE

OTHERWISE SPECIFIED.
-ALL WIRES ARE 18AWG UNLESS
NOTE:

SINK YEL/WHT
5
1.10
-----
1.5
0.1-1
TD19 SETTING

55

XF3
ORG/WHT
V SW8 I

66
SOURCE RED/WHT
77

43
UNLESS OTHERWISE SPECIFIED
X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
SCHEMATIC AND BOM, ELECTRICAL, 230VAC, AERO 40FP
MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

- CRE20180725
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

SCHEMATIC
SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT mbishop
DATE:

8/23/2018
PART NUMBER:
1 OF 3
REVISION:

6G0311 H
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. mbishop 05\19\2015

1 2 3 4 5 6
 1 2 3 4 5 6

43 43 43 43
REFERENCE:
top WI-06
D 91 - - 61 WF-06 D
middle NL-06C

131 - - 351
bottom
C
MNTG BOLTS

REFERENCE:
PP-M4-010
WL-M4
D A A A A D WO-M4

B
MNTG BOLTS
REFERENCE:
B B PP-M4-010
WL-M4

41
41

1L1
1L2
FU8

FU4
LF27 TD19 CR6 CR11 CR12 A
C GRN SCREW C
REFERENCE:
4G0743
WI-E
RNR-E

B NOTE - RING LUG GOES

B BETWEEN SCREW AND
WASHER
B B
XF8
PWS12

VFD30
B

B B
B B
A A A

D D

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
SCHEMATIC AND BOM, ELECTRICAL, 230VAC, AERO 40FP
MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

- CRE20180725
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

PANEL LAYOUT
SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT mbishop
DATE:

8/23/2018
PART NUMBER:
2 OF 3
REVISION:

6G0311 H
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. mbishop 05\19\2015

1 2 3 4 5 6
 1 2 3 4 5 6

ITEM USER1 TAGS QTY SUB DESC MISC1 53 4G1041 FU8 1 FUSE 50 MA
1 3G0085-A PJ11 1 CABLE MOLDED PANEL CONNECTION 54 4G1108-A TD19 1 RECYCLING TIMER
2 4G1501 50in. CABLE 16/4 W/ SHIELD 55 4G1218 FU4, FU8 2 FUSED TERMINAL BLOCK W/ BLOWN
3 4H0150 L1 180in. CABLE 16/3 TYPE OS 56 4G1224 FU4 1 FUSE 250 VAC 6.3A
4 4H0149 L1 1 NEMA PLUG PLUG CEE7/7 16 AMPS 57
D 5 58 D
6 13464 2 FULL INS CONNECTOR 59 4G1400 4 TERMINAL BLOCKS 3 AMP
7 4G0750 VR33 1 KNOB BLACK 60 4G1401 4 TERMINAL BLOCK JUMPER 10 POLE
8 4G1031 VR33 1 POTENTIOMETER 10K OHMS 61 4G1490 CR6 1 RELAY 240 V
9 4G1043 CB2 1 CIRCUIT SWITCH 62 4G1037 CR6,CR11,CR12 3 SOCKET RELAY
10 4G1044 CB2 1 CIRCUIT COVER 63 4G1038 CR6,CR11,CR12 6 RELAY CLIP
11 4G1155 PB6 1 BASE SW 1NC CONTACTS 22.5mm 64 CR11,CR12 2 RELAY CONTROL 24VAC 4 POLE
4G1529
12 4G1187 TD17 1 HOUR METER 240VAC 65 4G1588 VFD30 1 VFD CONTROLLER 230 VAC 1/2HP

13 4G1206 LT14 1 BASE LIGHT MODULE 220VAC LED 66 4H0200-A LF27 1 FILTER 10 AMP TRANSIANT
14 4G1255 LT14 1 PILOT HEAD LIGHT 22.5 mm 67 RNR-E 7 LUG, RING #10, 18-20AWG
15 4G1256 LT14 1 PILOT LIGHT BASE 68 FNR-C 5 LUG, FORK 22-18 #6 STUD
16 4G1307 2 CONNECTOR 18-22 AWG 69 RNB-E 3 LUG, RING #10, 14-16 AWG
17 4G1502 PB6 1 PUSHBUTTON 70 WF-M4 2 WASHER, FLAT M4
18 4I0279 SOL18, SOL20 2 COIL, SOLENOID 71 WI-E 8 WASHER, LOCK
220 VAC, 50/60 Hz
72 WL-M4 12 WASHER, LOCK M4
19 4G1793 1 CORD GRIP
73 PP-M4-010 10 SCREW, 10mm PHILLIPS PAN HEAD
20 4G1794 1 LOCKNUT
74 NL-06C 4 NUT, NYLON, 3/8"
21 4G1007 2 GRIP CORD PG11
75 WI-06 4 WASHER, LOCK, 3/8" INTERNAL TOOTH
22 4G1008 2 LOCKNUT PG11
76 WF-06 4 WASHER, FLAT, 3/8"
23 4G1009 1 GRIP CORD PG16
77 WASHER, LOCK 1/2 IN
C 24 4G1010 1 LOCKNUT PG16
78
WL-08
HH-08C-016
1
1 SCREW, 1/2 - 13 X 1" HEX HEAD CAP
C
25 4I0152-A PJ18, PJ20 2 CABLE 6' DIN "I"
79 PP-M3-008 2 SCREW PHILLIPS PAN HEAD
26 4P0021 2 LABEL PROTECTIVE GROUND
LABEL 80 4Z0417-A 4 SCREW, #6-19 X 1/2" PHILLIPS PAN HEAD
27 4P0023A 1 EARTH GROUND GRAPHIC
81 4G0743 7 SCREW 10-32 x3/8
28 4G0063 1 END CLAMP
82 PP-M4-012 2 SCREW, 12mm PHILLIPS PAN HEAD
29
83 4G1259 PB6 1 MODULE, PUSHBUTTON LT. BLUE, 230 V
30
WEATHERSTRIP INSULATION 84 4G1557 PB6 1 CONTACT BLOCK, NO. 10 AMP, 600 V
31 4Z0045 76in.
32 85 13488 10 CONNECTOR, CABLE END, #18, RED

33 4G1358 11 CONNECTOR, INSULATION DISPLACEMENT, 16-22AWG 86 WO-M4 2 WASHER, OVERSIZED, M4XM12 OD.
34 4G1039-A XF8 1 TRANSFORMER 6VA 230/115VAC
35 2H0020 XF3 1 TRANSFORMER 1KVA 120/230 VAC
36 4G1814 PWS12 1 LED POWER SOURCE
37 3G0183 PWS12 1 POWER SUPPLY BRACKET
38 3G0208 1 SUB-PANEL
39 4G0058 4 TERMINAL BLOCK #22 - #10 AWG
40
41 4G0066 2
HORIZONTAL JUMPER BAR
42 4G0068 11in. DIN TRACK
B 43 4G0081 50in. CABLE 3 COND. B
44 4G0084-BL 120in. WIRE
45 4G0084-R 240in. WIRE
46 4G0084-W 100in. WIRE
47 4G0423-B 40in. WIRE
48 4G0423-W 6in. WIRE
49 4G0423-Y/G 40in. WIRE
50 4G1361 5 CONNECTOR, INSULATION DISPLACEMENT, 16-22AWG, T
51
52

UNLESS OTHERWISE SPECIFIED

X/X u 1/64
A .X
.XX
.XXX
u .1
u .01
u .005
A
.XXXX u .0005
ANGLES u .5 v

D
TYPE:
125
SURFACES ASSEMBLY
THE DESIGN CONTAINED IN THIS DRAWING TITLE:
WAS ORIGINATED BY, AND IS THE EXCLUSIVE
PROPERTY OF COLD JET, LLC. IT IS NOT TO BE
USED IN ANY WAY DETRIMENTAL TO THE
SCHEMATIC AND BOM, ELECTRICAL, 230VAC, AERO 40FP
MANUFACTURABILITY REVIEW: DATE: INTERESTS OF COLD JET, LLC. MATERIAL: STOCK SIZE: PROJECT:

- CRE20180725
COPYRIGHT© COLD JET, LLC. ALL RIGHTS

BILL OF MATERIAL
SHEET
FIRST ARTICLE INSPECTION: DATE: DERIVED FROM: DATE: RELEASE DATE:
RESERVED. NO PART OF THIS DESIGN MAY BE
REPRODUCED, TRANSMITTED, TRANSCRIBED,
STORED IN A RETRIEVAL SYSTEM, OR
- - -
FUNCTIONAL VERIFICATION: DATE: TRANSLATED INTO ANY OTHER LANGUAGE OR CHANGED BY:
COMPUTER LANGUAGE IN WHOLE OR IN PART,
IN ANY FORM OR BY ANY MEANS, WHETHER IT mbishop
DATE:

8/23/2018
PART NUMBER:
3 OF 3
REVISION:

6G0311 H
BE ELECTRONIC, MECHANICAL, MAGNETIC,
VANTAGE ENTRY: DATE: OPTICAL, MANUAL, OR OTHERWISE, WITHOUT CREATED BY: DATE:
THE EXPRESS WRITTEN CONSENT OF COLD
JET, LLC. mbishop 05\19\2015

1 2 3 4 5 6