1N4001V

THRU
1N4 007V
SILICON RECTIFIER
VOLTAGE RANGE 1000 Volts CURRENT 1.0 Ampere

FEATURES
* Low cost
* Low leakage
* Low forward voltage drop
* High current capability
* P/N suffix V means AEC-Q101 qualified, e.g:1N4007V
* P/N suffix V means Halogen-free

MECHANICAL DATA
* Case: Molded plastic
* Epoxy: Device has UL flammability classification 94V-O .034 (0.9)
DIA.
* Lead: MIL-STD-202E method 208C guaranteed 1.0 (25.4) .028 (0.7)
MIN.
* Mounting position: Any
* Weight: 0.33 gram
.205 (5.2)
.166 (4.2)
.107 (2.7)
DIA.
.080 (2.0)

1.0 (25.4)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MIN.
Ratings at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

Dimensions in inches and (millimeters)

o
MAXIMUM RATINGS (At T A = 25 C unless otherwise noted)

RATINGS SYMBOL 1N4001V 1N4002V 1N4003V 1N4004V 1N4005V 1N4006V 1N4007V UNITS
Maximum Recurrent Peak Reverse Voltage VRRM 1000 Volts
Maximum RMS Voltage VRMS 700 Volts
Maximum DC Blocking Voltage VDC 1000 Volts
Maximum Average Forward Rectified Current
o IO 1.0 Amps
at T A = 75 C
Peak Forward Surge Current 8.3 ms single half sine-wave
I FSM 30 Amps
superimposed on rated load (JEDEC method)
Typical Current Squared Time I 2T 3.74 2
AS
Typical Junction Capacitance (Note) CJ 15 pF
Typical Thermal Resistance R JA 50 0
C/ W
Operating and Storage Temperature Range T J , T STG -55 to + 150 0
C

o
ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted)
CHARACTERISTICS SYMBOL 1N4001V1N4002V 1N4003V 1N4004V 1N4005V 1N4006V 1N4007V UNITS
Maximum Instantaneous Forward Voltage at 1.0A DC VF 1.0 Volts
Maximum DC Reverse Current @T A = 25 oC 0.2
uAmps
at Rated DC Blocking Voltage o
@T A = 150 C 200
IR
Maximum Full Load Reverse Current Average, Full Cycle
20 uAmps
.375” (9.5mm) lead length at TL = 75oC
NOTES : 1.Measured at 1 MH Z and applied reverse voltage of 4.0 volts 2020-12
REV:A
 RATING AND CHARACTERISTIC CURVES ( 1N4001V THRU 1N4007V)
FIG. 1 - TYPICAL FORWARD CURRENT FIG. 2 - MAXIMUM INSTANTANEOUS FORWARD
DERATING CURVE CHARACTERISTICS
1.0 20
AVERAGE FORWARD RECTIFIED

10

INSTANTANEOUS FORWARD
.8 4
2

CURRENT, (A)
CURRENT, (A)

.6 1.0

.4
.4 .2
.1 TJ = 25`*
Single Phase Pulse Width=300uS
.2 Half Wave 60Hz 1% Duty Cycle
Resistive or .04
Inductive Load
.02
0 .01
0 25 50 75 100 125 150 175 .6 .8 1.0 1.2 1.4 1.5
AMBIENT TEMPERATURE, ( ) INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS REVERSE CURRENT, (uA)

FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD FIG. 4 - MAXIMUM REVERSE CHARACTERISTICS

SURGE CURRENT
50 1000
PEAK FORWARD SURGE

8.3ms Single Half Sine-Wave

40
(JEDED Method)
CURRENT, (A)

100
30

20
1.0
10 .2
TA = 25

0 .01
1 2 4 6 8 10 20 40 60 80 100 0 20 40 60 80 100 120 140
NUMBER OF CYCLES AT 60Hz PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)

FIG. 5 - TYPICAL JUNCTION CAPACITANCE

JUNCTION CAPACITANCE, (pF)

200
100
60
40
20
10
TJ = 25
6
4
2
1
.1 .2 .4 1.0 2 4 10 20 40 100
REVERSE VOLTAGE, ( V )

RECTRON
 AXIAL LEAD TAPING SPECIFICATIONS
FOR RECTIFIERS

Axial lead devices are packed in accordance with EIA standard RS-296-D and specifications given below.

COMPONENT INNER TAPE

COMPNENT PITCH A PITCH B CUMULATIVE PITCH
OUTLINE 0.5mm (.020") 0.5mm (.020") 1.5mm (.059") TOLERANCE
T-1 5.0mm 26.0mm 2.0mm/20pitch
R-1 5.0mm 26.0mm 2.0mm/20pitch
A-405 5.0mm 26.0mm 2.0mm/20pitch
A-405 5.0mm 52.4mm 2.0mm/20pitch
DO-41 5.0mm 26.0mm 2.0mm/20pitch
DO-41 5.0mm 52.4mm 2.0mm/10pitch
DO-15 5.0mm 52.4mm 2.0mm/10pitch
R-3 5.0mm 52.4mm 2.0mm/10pitch
DO-201AD 10.0mm 52.4mm 2.0mm/10pitch
R-6 10.0mm 52.4mm 2.0mm/10pitch

O O
90 5
Z
DO
A

L1
D1

L2 D

T
E

Fig.: Configuration of AXIAL LEAD TAPING

ITEM SYMBOL SPECIFICATIONS (mm) SPECIFICATIONS (inch)

Component alignment Z 1.2 Max. 0.047 Max.
Tape width T 6.0 0.4 0.236 0.016
Exposed adhesive E 0.8 Max. 0.032 Max.
Body eccentricity IL1-L2I 1.0 Max. 0.039 Max.
Reel outside diameter D 330.0 13.0
Reel inner diameter D1 85.7 0.3 3.374 0.012
Feed hole diameter DO 30.5 0.4 1.201 0.016
Reel width W 79.0 1.0 3.110 0.039

Notes : 1.Each component lead shall be sandwiched between tapes for a minimum of 3.2mm (0.126").
2.The reel width "W" for 26mm taping is 50.0 1.0mm (1.97" 0.040").
 PACKAGING OF DIODE AND BRIDGE RECTIFIERS
BULK PACK
PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE EA PER CARTON GROSS
(mm) (mm) WEIGHT(Kg)

DO-41 -B 1,000 194*75*21 415*220*255 50,000 16.2

REEL PACK
PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS
PACKAGE INNER SPACE
CODE REEL (mm) (mm) (mm) (mm) CARTON WEIGHT(Kg)
BOX
DO-41 -T 5,000 5,000 5.0 52 330 355*350*335 20,000 10.49

AMMO PACK
PACKING REEL COMPONENT TAPE SPACE BOX SIZE CARTON CARTON GROSS
PACKAGE
CODE ( EA ) SPACE(mm) (mm) (mm) SIZE(mm) ( EA ) WEIGHT (Kg)

DO-41 -F 3,000 5.0 52 255*73*100 400*268*225 30,000 13.0

DO-41 -E 3,000 5.0 26 256*48*94 365*270*217 42,000 12.41
 RECTRON
Attachment information about 1N400XV

1. Internal Circuit

Anode

Cathode

2. Marking on the body

Cathode Band
Plant - code
Year – code
Rectron Logo (Y: Last digit of year &
V X X H
A:2010,B:2011……)
Halogen-free
Month – code
Part No. 1N 4 0 0 H (M:1~9,O,N,D)
H---for all Voltage rang

3. The net weight 330mg / pcs

4. Taping packaging specification

4.1 All polarized components must be oriented in one direction.
4.2 For diode, at least one side of the cathode lead tape should be
red, and anode lead tape should be white.
4.3A minimum 300 mm (12”) leader shall be provided at each end
of the reel.
4.4 Staples shall not be used for splicing. Splice length shall be 4.0
inches minimum and shall not be misaligned more than 0.8mm.
 RECTRON
Attachment information about 1N400XV

5. Items marked on the reel box and carton

5.1 On the reel (for –T)

CUSTOMER
TYPE
QUANTITY
LOT NO.
Q.A.
REMARK
5.2 On the box (for –E & -F)
TYPE
QUANTITY
LOT NO.
Q.A.
5.3 On the carton
CUSTOMER
TYPE
QUANTITY
LOT NO.
REMARK
1. BOX

Packing L W H
Code (mm) (mm) (mm)
-F 255 100 73
-E 256 94 46

2. REEL

Packing D
Code (mm)
-T 178
-W 330

3. CARTON

Packing L W H
Code (mm) (mm) (mm)
-T 355 350 335
-F 402 270 225
-E 347 320 220
 DISCLAIMER NOTICE

Rectron Inc reserves the right to make changes without notice to any product
specification herein to make corrections modifications enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.

Rectron products are not designed intended or authori ed for use in medical
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause in ury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims damages and expendit-
ures.