Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

OSCE Checklists-1

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

OSCE- IV Cannulation

Sr Procedure Checklist Yes No Marks


No
1 Ensure that you have all of your equipments ready for iv cannulation. 1
2 Sanitise your hands using alcohol cleanser. 1
3 Identify the vein to be canulated. 1
4 Apply the tourniquet and re-check the vein. 1
5 Put on your gloves, clean area of vein with the alcohol wipe and let it dry. 1
6 Remove the cannula from its packaging and remove the needle cover ensuring not to 1
touch the needle.
7 Insert the needle, bevel upwards at about 30 degrees in the vein. 1
8 Once position of needle confirmed, progress the entire cannula a further 2mm, then 2
fix the needle, advancing the rest of the cannula into the vein.
9 Release the tourniquet, apply pressure to the vein at the tip of the cannula and 1
remove the needle fully. Remove the cap from the needle and put this on the end of
the cannula.
10 Carefully dispose of the needle into the sharps bin. 1
11 Apply the dressing to the cannula to fix it in place and ensure that the date sticker 1
has been completed and applied.
12 Check that the use-by date on the saline has not passed. If the date is ok, fill the 2
syringe with saline and flush it through the cannula to check for patency. If there is
any resistance, or you notice any localised tissue swelling: immediately stop
flushing, remove the cannula and start again.

13 Dispose of your gloves and equipment in the clinical waste bin. 1


Total Marks ( / 15)
Materials Required
Alcohol cleanser, Gloves, alcohol wipe, disposable tourniquet,
IV cannula, suitable plaster, syringe, Saline

OSCE- Intra dermal injection


Sr No Procedure Checklist Yes No Marks
1 Gather all supplies: medication syringe, non-sterile gloves, alcohol swab and 1
sterile gauze, Band-Aid (if required).
2 Prepare medication or solution & Check physician orders. 1
3 Select appropriate site for administration. 1
4 Perform hand hygiene and apply non-sterile gloves. 1
5 Clean the site with an alcohol swab or antiseptic swab. Allow the site to dry. 1
6 Remove needle from cap by pulling it off in a straight motion, ensuring not to 1
touch needle.
7 Hold the syringe in the dominant hand between the thumb and forefinger, with 1
the bevel of the needle up.
8 Keeping the bevel side up allows for smooth piercing of the skin and induction 2
of the medication into the dermis.
9 Once syringe is in place, slowly inject the solution while watching for a small 2
weal or bleb to appear on site of injection.
10 Withdraw the needle at the same angle as insertion, engage safety shield or 2
needle guard, and discard in a sharps container. Do not massage area after
injection.
11 Discard remaining supplies, remove gloves, and perform hand hygiene 1
12 Proper documentation helps ensures safety so document time, date, location, 1
and type of medication injected.
Total Marks ( / 15)

Materials Required

Medication
Hypodermic syringe,
Non-Sterile Gloves,
Alcohol Swab And
Sterile Gauze, Band-Aid (If Required).

You might also like