153035

E10823
First Edition
September 2015
ASUS Notebook PC
E-manual
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by
any means, except documentation kept by the purchaser for backup purposes, without the express
written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES
OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION
OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL
USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY
ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND
SOFTWARE DESCRIBED IN IT.
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to
recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to
claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death)
and damage to real property and tangible personal property; or any other actual and direct damages
resulted from omission or failure of performing legal duties under this Warranty Statement, up to the
listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or
infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers,
and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS
AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING
LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY.
SERVICE AND SUPPORT
Visit our multi-language web site at http://support.asus.com
2 Notebook PC E-Manual
Table of Contents
About this manual......................................................................................................7
Conventions used in this manual.............................................................................. 8
Icons..................................................................................................................................... 8
Typography........................................................................................................................ 8
Safety precautions......................................................................................................9
Using your Notebook PC............................................................................................... 9
Caring for your Notebook PC...................................................................................... 10
Proper disposal................................................................................................................. 11
Chapter 1: Hardware Setup

Getting to know your Notebook PC....................................................................14
Top View.............................................................................................................................. 14
Bottom................................................................................................................................. 17
Right Side........................................................................................................................... 19
Left Side.............................................................................................................................. 20
Front Side........................................................................................................................... 21
Chapter 2: Using your Notebook PC

Getting started............................................................................................................26
Charge your Notebook PC............................................................................................ 26
Lift to open the display panel..................................................................................... 28
Press the power button................................................................................................. 28
Using the touchpad........................................................................................................ 29
Using the keyboard....................................................................................................33
Function keys.................................................................................................................... 33
Windows® 10 keys........................................................................................................... 34
Multimedia control keys............................................................................................... 35
Using the numeric keypad........................................................................................... 36
Notebook PC E-Manual 3
Chapter 3: Working with Windows® 10
Starting for the first time..........................................................................................38
Start menu....................................................................................................................39
Windows® apps...........................................................................................................41
Working with Windows® apps.................................................................................... 42
Customizing Windows® apps...................................................................................... 42
Task view........................................................................................................................45
Snap feature.................................................................................................................46
Snap hotspots................................................................................................................... 46
Action Center...............................................................................................................48
Other keyboard shortcuts.......................................................................................49
Connecting to wireless networks.........................................................................51
Wi-Fi...................................................................................................................................... 51
Bluetooth............................................................................................................................ 52
Airplane mode.................................................................................................................. 53
Connecting to wired networks..............................................................................54
Turning your Notebook PC off...............................................................................56
Putting your Notebook PC to sleep.....................................................................57
Chapter 4: Power-On Self-Test (POST)

The Power-On Self-Test (POST)..............................................................................60
Using POST to access BIOS and Troubleshoot...................................................... 60
BIOS.................................................................................................................................60
Accessing BIOS................................................................................................................. 60
BIOS Settings..................................................................................................................... 61
Recovering your system...........................................................................................71
Performing a recovery option..................................................................................... 72
Tips and FAQs
Useful tips for your Notebook PC.........................................................................76
Hardware FAQs............................................................................................................77
Software FAQs..............................................................................................................80
Appendices
DVD-ROM Drive Information....................................................................................... 84
Blu-ray ROM Drive Information.................................................................................. 86
Internal Modem Compliancy...................................................................................... 86
Overview............................................................................................................................. 87
Network Compatibility Declaration.......................................................................... 87
Non-Voice Equipment ................................................................................................... 87
Federal Communications Commission Interference Statement.................... 89
Declaration of Conformity (R&TTE directive 1999/5/EC)................................... 90
FCC Radio Frequency (RF) Exposure Caution Statement.................................. 91
CE Marking......................................................................................................................... 91
IC Radiation Exposure Statement for Canada....................................................... 92
Déclaration d’Industrie Canada relative à l’exposition aux ondes radio .... 93
Wireless Operation Channel for Different Domains............................................ 94
France Restricted Wireless Frequency Bands........................................................ 94
UL Safety Notices............................................................................................................. 96
Power Safety Requirement........................................................................................... 97
TV Notices.......................................................................................................................... 97
REACH.................................................................................................................................. 97
Macrovision Corporation Product Notice............................................................... 97
Prevention of Hearing Loss.......................................................................................... 97
Nordic Lithium Cautions (for lithium-ion batteries)............................................ 98
Optical Drive Safety Information............................................................................... 99
CTR 21 Approval (for Notebook PC with built-in Modem)............................... 100
ENERGY STAR complied product............................................................................... 102
Global Environmental Regulation Compliance and Declaration................... 102
ASUS Recycling/Takeback Services........................................................................... 103
Rechargeable Battery Recycling Service in
North America.................................................................................................................. 103
Regional notice for California...................................................................................... 103
Regional notice for Singapore.................................................................................... 103
Regional notice for India............................................................................................... 104
Notices for removable batteries................................................................................. 104
Avis concernant les batteries remplaçables.......................................................... 104
About this manual
This manual provides information about the hardware and software
features of your Notebook PC, organized through the following
chapters:
Chapter 1: Hardware Setup

This chapter details the hardware components of your Notebook
PC.
Chapter 2: Using your Notebook PC

This chapter shows you how to use the different parts of your
Notebook PC.
Chapter 3: Working with Windows® 10

This chapter provides an overview of using Windows® 10 in your
Notebook PC.
Chapter 4: Power-On Self-Test (POST)

This chapter shows you how to use POST to change the settings
of your Notebook PC.
Tips and FAQs

This section presents some recommended tips, hardware FAQs,
and software FAQs you can refer to for maintaining and fixing
common issues with your Notebook PC.
Appendices
This section includes notices and safety statements for your
Notebook PC.
Conventions used in this manual
To highlight key information in this manual, some text are presented as
follows:
IMPORTANT! This message contains vital information that must be

followed to complete a task.
NOTE: This message contains additional information and tips that can
help complete tasks.
WARNING! This message contains important information that must be

followed to keep you safe while performing tasks and prevent damage to
your Notebook PC's data and components.
Icons
The icons below indicate the devices you can use for completing a
series of tasks or procedures on your Notebook PC.
= Use the touchpad.
= Use the keyboard.
Typography
Bold = This indicates a menu or an item that must be selected.
Italic = This indicates sections that you can refer to in this manual.
Safety precautions
Using your Notebook PC
This Notebook PC should only be used in
environments with ambient temperatures between
5°C (41°F) and 35°C (95°F).
Refer to the rating label on the bottom of your

Notebook PC and ensure that your power adapter
complies with this rating.
Do not leave your Notebook PC on your lap or near

any part of your body to prevent discomfort or
injury from heat exposure.
Do not use damaged power cords, accessories, and

other peripherals with your Notebook PC.
While powered on, ensure that you do not carry or

cover your Notebook PC with any materials that can
reduce air circulation.
Do not place your Notebook PC on uneven or
unstable work surfaces.
You can send your Notebook PC through x-ray

machines (used on items placed on conveyor belts),
but do not expose them to magnetic detectors and
wands.
Contact your airline provider to learn about related
in-flight services that can be used and restrictions
that must be followed when using your Notebook
PC in-flight.
Caring for your Notebook PC
Disconnect the AC power and remove the battery

pack (if applicable) before cleaning your Notebook
PC. Use a clean cellulose sponge or chamois cloth
dampened with a solution of nonabrasive detergent
and a few drops of warm water. Remove any extra
moisture from your Notebook PC using a dry cloth.
Do not use strong solvents such as thinners,

benzene, or other chemicals on or near your
Notebook PC.
Do not place objects on top of your Notebook PC.
Do not expose your Notebook PC to strong

magnetic or electrical fields.
Do not use or expose your Notebook PC near

liquids, rain, or moisture.
Do not expose your Notebook PC to dusty

environments.
Do not use your Notebook PC near gas leaks.
Proper disposal
Do not throw your Notebook PC in municipal waste.
This product has been designed to enable proper
reuse of parts and recycling. The symbol of the
crossed out wheeled bin indicates that the product
(electrical, electronic equipment and mercury-
containing button cell battery) should not be
placed in municipal waste. Check local regulations
for disposal of electronic products.
Do not throw the battery in municipal waste. The

symbol of the crossed out wheeled bin indicates
that the battery should not be placed in municipal
waste.
Chapter 1:
Hardware Setup
Getting to know your Notebook PC
Top View
NOTE: The keyboard's layout may vary per region or country.
Array microphone
The array microphones feature echo canceling, noise
suppression, and beam forming functions for better voice
recognition and audio recording.
Camera indicator
The camera indicator lights up when the built-in camera is in
use.
Camera
The built-in camera allows you to take pictures or record videos
using your Notebook PC.
Display panel
This high-definition display panel provides excellent viewing
features for photos, videos, and other multimedia files on your
Notebook PC.
Air vents
The air vents allow cool air to enter and warm air to exit the
Notebook PC.
WARNING! Ensure that paper, books, clothing, cables, or other

objects do not block any of the air vents or else overheating may
occur.
Keyboard
The keyboard provides full-sized QWERTY keys with a
comfortable travel depth for typing. It also enables you to use
the function keys, allows quick access to Windows®, and controls
other multimedia functions.
NOTE: The keyboard layout differs by model or territory.
Touchpad
The touchpad allows the use of multi-gestures to navigate
onscreen, providing an intuitive user experience. It also simulates
the functions of a regular mouse.
NOTE: For more details, refer to the Using the touchpad section in
this manual.
Power button
Press the power button to turn your Notebook PC on or off. You
can also use the power button to put your Notebook PC to sleep
or hibernate mode and wake it up from sleep or hibernate mode.
In the event that your Notebook PC becomes unresponsive,
press and hold the power button for at least four (4) seconds
until your Notebook PC shuts down.
Numeric keypad (on selected models)

The numeric keypad toggles between these two functions: for
numeric input and as pointer direction keys.
NOTE: For more details, refer to the Using the numeric keypad
section in this manual.
Bottom
NOTE: The bottom side may vary in appearance depending on model.
WARNING! The bottom of the Notebook PC can get warm to hot while in
use or while charging the battery pack. When working on your Notebook
PC, do not place it on surfaces that can block the vents.
IMPORTANT! Battery time varies by usage and by the specifications for

this Notebook PC. The battery pack cannot be disassembled.
Air vents
The air vents allow cool air to enter and warm air to exit the
Notebook PC.
WARNING! Ensure that paper, books, clothing, cables, or other

objects do not block any of the air vents or else overheating may
occur.
Audio speakers
The built-in audio speakers allow you to hear audio straight from
your Notebook PC. Audio features are software-controlled.
Right Side
Memory card reader

This built-in memory card reader supports SD and SDHC card
formats.
USB 2.0 port
The USB (Universal Serial Bus) port is compatible with USB 2.0 or
USB 1.1 devices such as keyboards, pointing devices, flash disk
drives, external HDDs, speakers, cameras and printers.
Headphone/Headset/Microphone jack
This port allows you to connect amplified speakers or
headphones. You can also use this port to connect your headset
or an external microphone.
Security slot
This security slot allows you to secure your Notebook PC using
compatible Notebook PC security products.
Left Side
Power (DC) input port

Insert the bundled power adapter into this port to charge the
battery pack and supply power to your Notebook PC.
WARNING! The adapter may become warm to hot while in use.

Do not cover the adapter and keep it away from your body while
it is connected to a power source.
IMPORTANT! Use only the bundled power adapter to charge the

battery pack and supply power to your Notebook PC.
LAN port
Insert the network cable into this port to connect to a local area
network.
HDMI port
This port is for the HDMI (High-Definition Multimedia Interface)
connector and is HDCP compliant for HD DVD, Blu-ray, and other
protected content playback.
USB 3.0 port
The USB 3.0 (Universal Serial Bus 3.0) port provides a transfer rate
of up to 5 Gbit/s and is backward compatible to USB 2.0.
NOTE: The maximum power output for this port is 5V/2A.
Front Side
15” model
14” model
Status indicators
The status indicators help identify the current hardware status of
your Notebook PC.
Power indicator
The power indicator lights up when the Notebook PC

is turned on and blinks slowly when the Notebook
PC is in sleep mode.
Two-color battery charge indicator

The two-color LED provides a visual indication of the
battery’s charge status. Refer to the following table
for details:
Color Status
Solid Green The Notebook PC is plugged to
a power source and the battery
power is between 95% and
100%.
Solid Orange The Notebook PC is plugged
to a power source, charging its
battery, and the battery power
is less than 95%.
Blinking Orange The Notebook PC is running on
battery mode and the battery
power is less than 10%.
Lights off The Notebook PC is running on

battery mode and the battery
power is between 10% to 100%.
Drive activity indicator

This indicator lights up when your Notebook PC is
accessing the internal storage drives.
Airplane mode indicator
This indicator lights up when the Airplane mode in
your Notebook PC is enabled.
NOTE: When enabled, the Airplane mode

disables all wireless connectivity.
Capital lock indicator
This indicator lights up when the capital lock

function is activated. Using capital lock allows you
to type capitalized letters (such as A, B, C) using your
Notebook PC’s keyboard.
Chapter 2:
Using your Notebook PC
Getting started
Charge your Notebook PC
A. Connect the AC power cord to the AC/DC adapter.
B. Plug the AC power adapter into a 100V~240V power source.
C. Connect the DC power connector into your Notebook PC’s power
(DC) input port.
Charge the Notebook PC for 3 hours before using it in
battery mode for the first time.
NOTE: The power adapter may vary in appearance, depending on models

and your region.
IMPORTANT!
Power adapter information:
• Input voltage: 100-240Vac
• Input frequency: 50/60Hz
• Rating output current: 14”/15”: 3.42A (65W)

15”: 4.74A (90W)
• Rating output voltage: 19V
IMPORTANT!
• Locate the input/output rating label on your Notebook PC and

ensure that it matches the input/output rating information on your
power adapter. Some Notebook PC models may have multiple rating
output currents based on the available SKU.
• Ensure that your Notebook PC is connected to the power adapter

before turning it on for the first time. We strongly recommend that
you use a grounded wall socket while using your Notebook PC on
power adapter mode.
• The socket outlet must be easily accessible and near your Notebook
PC.
• To disconnect your Notebook PC from its main power supply, unplug

your Notebook PC from the power socket.
WARNING!
Read the following precautions for your Notebook PC’s battery:
• Only ASUS-authorized technicians should remove the battery inside

the device (for non-removable battery only).
• The battery used in this device may present a risk of fire or chemical
burn if removed or disassembled.
• Follow the warning labels for your personal safety.
• Risk of explosion if battery is replaced by an incorrect type.
• Do not dispose of in fire.
• Never attempt to short-circuit your Notebook PC’s battery.
• Never attempt to disassemble and reassemble the battery

(for non-removable battery only).
• Discontinue usage if leakage is found.
• The battery and its components must be recycled or disposed of

properly.
• Keep the battery and other small components away from children.
Lift to open the display panel
Press the power button
Using the touchpad
Moving the pointer
You can tap anywhere on the touchpad to activate its pointer, then slide
your finger on the touchpad to move the pointer onscreen.
Slide horizontally
Slide vertically
Slide diagonally
One-finger gestures
Tap/Double-tap
• Tap an app to select it.

• Double-tap an app to launch it.
Drag and drop
Double-tap an item, then slide the same finger without lifting it off the
touchpad. To drop the item to its new location, lift your finger from the
touchpad.
Left-click Right-click
• Click an app to select it. Click this button to open the right-
click menu.
• Double-click an app to
launch it.
NOTE: The areas inside the dotted line represent the locations of the left
mouse button and the right mouse button on the touchpad.
Two-finger gestures
Two-finger scroll (up/down) Two-finger scroll (left/right)
Slide two fingers to scroll up or Slide two fingers to scroll left or

down. right.
Zoom out Zoom in
Bring together your two fingers Spread apart your two fingers on
on the touchpad. the touchpad.
Drag and drop
Select an item then press and hold the left button. Using your other
finger, slide on the touchpad to drag the item, lift your finger off the
button to drop the item.
Using the keyboard
Function keys
The function keys on your Notebook PC’s keyboard can trigger the
following commands:
Puts the Notebook PC into Sleep mode
Turns Airplane mode on or off
NOTE: When enabled, the Airplane mode disables

all wireless connectivity.
Decreases display brightness
Increases display brightness
Turns the display panel on or off
Toggles the display mode
NOTE: Ensure that the second display is connected

to your Notebook PC.
Enables or disables the touchpad
Turns the speaker on or off
Turns the speaker volume down
Turns the speaker volume up
Windows® 10 keys
There are two special Windows® keys on your Notebook PC’s keyboard
used as below:
Launches the Start menu
Displays the drop-down menu
Multimedia control keys
The multimedia control keys allow you to control multimedia files, such
as audios and videos, when played in your Notebook PC.
Press in combination with the arrow keys on your Notebook PC,

illustrated as below.
Stop
Skip to Play or Skip to

previous pause next track
track or or fast
rewind forward
Using the numeric keypad
NOTE: The numeric keypad layout may differ by model or territory but the
usage procedures remain the same.
A numeric keypad is available on

selected Notebook PC models. You
can use this keypad for numeric
input or as pointer direction keys.
Press
to
toggle between using

the keypad as number
keys or as pointer
direction keys.
Chapter 3:
Working with Windows® 10
Starting for the first time
When you start your Notebook PC for the first time, a series of screens
appear to guide you in configuring your Windows® 10 operating system.
To start your Notebook PC for the first time:
1. Press the power button on your Notebook PC. Wait for a few
minutes until the setup screen appears.
2. From the setup screen, pick your region and a language to use on
your Notebook PC.
3. Carefully read the License Terms. Select I accept.
4. Follow the onscreen instructions to configure the following basic
items:
• Personalize
• Get online
• Settings
• Your account
5. After configuring the basic items, Windows® 10 proceeds to install

your apps and preferred settings. Ensure that your Notebook PC
is kept powered on during the setup process.
6. Once the setup process is complete, the Desktop appears.
NOTE: The screenshots in this chapter are for reference only.
Start menu
The Start menu is the main gateway to your Notebook PC’s programs,
Windows® apps, folders, and settings.
Change account settings, lock, or sign out from your account
Launch an app from the Start screen
Launch Taskview Launch an app from the taskbar

Launch Search
Launch the Start menu
Launch All apps
Shut down, restart, or put your Notebook PC to sleep
Launch Settings
Launch File Explorer
You can use the Start menu to do these common activities:
• Start programs or Windows® apps

• Open commonly used programs or Windows® apps
• Adjust Notebook PC settings
• Get help with the Windows operating system
• Turn off your Notebook PC
• Log off from Windows or switch to a different user account
Launching the Start menu
Position your mouse pointer over the Start button

in the lower-left corner of your desktop then click it.
Press the Windows logo key on your keyboard.
Opening programs from the Start menu

One of the most common uses of the Start menu is opening programs
installed on your Notebook PC.
Position your mouse pointer over the program then

click to launch it.
Use the arrow keys to browse through the programs.

Press to launch it.
NOTE: Select All apps at the bottom of the left pane to display a full list of
programs and folders on your Notebook PC in alphabetical order.
Windows® apps
These are apps pinned on the right pane of the Start menu and
displayed in tiled-format for easy access.
NOTE: Some Windows® apps require signing in to your Microsoft account

before they are fully launched.
Working with Windows® apps
Use your Notebook PC’s touchpad or keyboard to launch, customize,
and close apps.
Launching Windows® apps from the Start menu
Position your mouse pointer over the app then click to

launch it.
Use the arrow keys to browse through the apps. Press

to launch an app.
Customizing Windows® apps

You can move, resize, unpin, or pin apps to the taskbar from the Start
menu using the following steps:
Moving apps
Position your mouse pointer over the app, then drag and
drop the app to a new location.
Resizing apps
Position your mouse pointer over the app and right-click

it, then click Resize and select an app tile size.
Use the arrow keys to navigate to the app. Press ,

then select Resize and select an app tile size.
Unpinning apps

it, then click Unpin from Start.

then select Unpin from Start.
Pinning apps to the taskbar

it, then click Pin to taskbar.

then select Pin to taskbar.
Pinning more apps to the Start menu
From All apps, position your mouse pointer over the

app you want to add to the Start menu and right-click it,
then click Pin to Start.
From All apps, press on the app that you want to

add to the Start menu, then select Pin to Start.
Task view
Quickly switch between opened apps and programs using the task view
feature, you can also use task view to switch between desktops.
Launching task view
Position your mouse pointer over the icon on the

taskbar and click it.
Press on your keyboard.
Snap feature
The Snap feature displays apps side-by-side, allowing you to work or
switch between apps.
Snap hotspots
You can drag and drop apps to these hotspots to snap them into place.
Using Snap
1. Launch the app you wish to snap.

2. Drag the title bar of your app and drop the app to
the edge of the screen to snap.
3. Launch another app and repeat the above steps to
snap another app.
1. Launch the app you wish to snap.
2. Press and hold the key, then use the arrow

keys to snap the app.
3. Launch another app and repeat the above steps to
snap another app.
Action Center
Action Center consolidates notifications from apps and presents a single
place where you can interact with them. It also has a really useful Quick
Actions section at the bottom.
Launching Action Center
Position your mouse pointer over the icon on the

taskbar and click it.
Press on your keyboard.
Other keyboard shortcuts
Using the keyboard, you can also use the following shortcuts to help
you launch applications and navigate Windows® 10.
\ Launches Start menu
Launches Action Center
Launches the desktop
Launches the File Explorer
Opens the Share panel
Launches Settings
Launches Connect panel
Activates the Lock screen
Minimizes all currently active windows
Launches Search
Launches Project panel
Opens the Run window
Opens Ease of Access Center
Opens the context menu of the Start button
Launches the magnifier icon and zooms in

your screen
Zooms out your screen
Opens Narrator Settings
Connecting to wireless networks
Wi-Fi
Access emails, surf the Internet, and share applications via social
networking sites using your Notebook PC’s Wi-Fi connection.
IMPORTANT! Airplane mode disables this feature. Ensure that Airplane

mode is turned off before enabling the Wi-Fi connection of your
Notebook PC.
Connecting Wi-Fi
Connect your Notebook PC to a Wi-Fi network by using the following
steps:
1. Select the icon from the taskbar.
2. Select the icon to enable Wi-Fi.
3. Select an access point from the list of available Wi-Fi

connections.
4. Select Connect to start the network connection.
NOTE: You may be prompted to enter a security key to

activate the Wi-Fi connection.
Bluetooth
Use Bluetooth to facilitate wireless data transfers with other Bluetooth-
enabled devices.
IMPORTANT! Airplane mode disables this feature. Ensure that Airplane

mode is turned off before enabling the Bluetooth connection of your
Notebook PC.
Pairing with other Bluetooth-enabled devices

You need to pair your Notebook PC with other Bluetooth-enabled
devices to enable data transfers. Connect your devices by using the
following steps:
1. Launch Settings from the Start menu.

2. Select Devices, then select Bluetooth to search for
Bluetooth-enabled devices.
3. Select a device from the list. Compare the passcode
on your Notebook PC with the passcode sent to
your chosen device. If they are the same, select
Yes to successfully pair your Notebook PC with the
device.
NOTE: For some Bluetooth-enabled devices, you may be

prompted to key in the passcode of your Notebook PC.
Airplane mode
Airplane mode disables wireless communication, allowing you to use
your Notebook PC safely while in-flight.
NOTE: Contact your airline provider to learn about related in-flight

services that can be used and restrictions that must be followed when
using your Notebook PC in-flight.
Turning Airplane mode on
1. Launch Action Center from the taskbar.
2. Select the icon to enable Airplane mode.
Press .
Turning Airplane mode off
1. Launch Action Center from the taskbar.
2. Select the icon to disable Airplane mode.
Press .
Connecting to wired networks
You can also connect to wired networks, such as local area networks
and broadband Internet connection, using your Notebook PC’s LAN
port.
NOTE: Contact your Internet Service Provider (ISP) for details or

your network administrator for assistance in setting up your Internet
connection.
To configure your settings, refer to the following procedures.
IMPORTANT! Ensure that a network cable is connected between your

Notebook PC’s LAN port and a local area network before performing the
following actions.
Configuring a dynamic IP/PPPoE network connection
1. Launch Settings.
2. Select Network & Internet.
3. Select Ethernet > Network and Sharing Center.
4. Select your LAN then select Properties.
5. Select Internet Protocol Version 4 (TCP/IPv4) then
select Properties.
6. Select Obtain an IP address automatically then
select OK.
NOTE: Proceed to the next steps if you are using PPPoE connection.
7. Return to the Network and Sharing Center
window then select Set up a new connection or
network.
8. Select Connect to the Internet then select Next.
9. Select Broadband (PPPoE).
10. Type your User name, Password, and Connection
name then select Connect.
11. Select Close to finish the configuration.
12. Select on the taskbar then select the

connection you just created.
13. Type your user name and password then select
Connect to start connecting to the Internet.
Configuring a static IP network connection
1. Repeat steps 1 to 5 under Configuring a dynamic

IP/PPPoE network connection.
2. Select Use the following IP address.
3. Type the IP address, Subnet mask and Default
gateway from your service provider.
4. If needed, you can also type the preferred DNS
server address and alternate DNS server address
then select OK.
Turning your Notebook PC off
You can turn off your Notebook PC by doing either of the following
procedures:
• Launch the Start menu, then select >

Shut down to do a normal shutdown.
• From the log-in screen, select > Shut down.
• Press to launch Shut Down

Windows. Select Shut down from the drop-down
list then select OK.
• If your Notebook PC is unresponsive, press
and hold the power button for at least four (4)
seconds until your Notebook PC turns off.
Putting your Notebook PC to sleep
To put your Notebook PC to Sleep mode:
• Launch the Start menu, then select >

Sleep to put your Notebook PC to sleep.
• From the log-in screen, select > Sleep.
Press to launch Shut Down Windows.

Select Sleep from the drop-down list then select OK.
NOTE: You can also put your Notebook PC to Sleep mode by pressing the
power button once.
Chapter 4:
Power-On Self-Test (POST)
The Power-On Self-Test (POST)
The POST (Power-On Self-Test) is a series of software-controlled
diagnostic tests that run when you turn on or restart your Notebook PC.
The software that controls the POST is installed as a permanent part of
the Notebook PC’s architecture.
Using POST to access BIOS and Troubleshoot

During POST, you can access the BIOS settings or run troubleshooting
options using the function keys of your Notebook PC. You may refer to
the following information for more details.
BIOS
The BIOS (Basic Input and Output System) stores system hardware
settings that are needed for system startup in the Notebook PC.
The default BIOS settings apply to most conditions of your Notebook
PC. Do not change the default BIOS settings except in the following
circumstances:
• An error message appears onscreen during system bootup and

requests you to run the BIOS Setup.
• You have installed a new system component that requires further
BIOS settings or updates.
WARNING! Using inappropriate BIOS settings may result to system

instability or boot failure. We strongly recommend that you change the
BIOS settings only with the help of a trained service personnel.
Accessing BIOS
Restart your Notebook PC then press during POST.
BIOS Settings
NOTE: The BIOS screens in this section are for reference only. The actual
screens may differ by model and territory.
Boot
This menu allows you to set your boot option priorities. You may refer to
the following procedures when setting your boot priority.
1. On the Boot screen, select Boot Option #1.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced Boot Security Save & Exit
Sets the system
Boot Configuration
boot order
Fast Boot [Enabled]
Launch CSM [Disabled]
Driver Option Priorities
Boot Option Priorities

→← : Select Screen
Boot Option #1 [Windows Boot Manager] ↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
Add New Boot Option F9 : Optimized Defaults
Delete Boot Option F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2015 American Megatrends, Inc.
2. Press and select a device as the Boot Option #1.

Boot Configuration Sets the system
boot order
Fast Boot [Enabled]
Launch CSM [Disabled]
Driver Option Priorities
Boot Option Priorities Boot Option #1 →← : Select Screen

Boot Option #1 Windows Boot
[Windows Boot Manager
Manager] ↑↓ : Select Item
Enter: Select
Disabled
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
Add New Boot Option F10 : Save & Exit
Delete Boot Option ESC : Exit
Security
This menu allows you to set up the administrator and user password
of your Notebook PC. It also allows you to control the access to your
Notebook PC’s hard disk drive, input/output (I/O) interface, and USB
interface.
NOTE:
• If you install a User Password, you will be prompted to input this

before entering your Notebook PC's operating system.
• If you install an Administrator Password, you will be prompted to

input this before entering BIOS.

Password Description Set Administrator

Password. The
If ONLY the Administrator’s password is set, password length
then this only limits access to Setup and is must be in the
only asked for when entering Setup. If ONLY following range:
the user’s password is set, then this is a
power on password and must be entered to boot Minimum length 3
or enter Setup. In Setup, the User will have Maximum length 20
Administrator rights.
Administrator Password Status NOT INSTALLED
User Password Status NOT INSTALLED
Administrator Password
User Password
HDD Password Status : NOT INSTALLED
Set Master Password
Set User Password →← : Select Screen
↑↓ : Select Item
I/O Interface Security Enter: Select
System Mode state User +/— : Change Opt.
F1 : General Help
Secure Boot state Enabled F9 : Optimized Defaults
Secure Boot Control [Enabled] F10 : Save & Exit
ESC : Exit
Key Management
To set the password:
1. On the Security screen, select Administrator Password or User

Password.
2. Type in a password then press .
3. Re-type to confirm the password then press .
To clear the password:
1. On the Security screen, select Administrator Password or User

Password.
2. Type in the current password then press .
3. Leave the Create New Password field blank then press .
4. Select Yes in the confirmation box then press .
I/O Interface Security
In the Security menu, you can access I/O Interface Security to lock
or unlock some interface functions of your Notebook PC.
Security
I/O Interface Security If Locked, LAN

controller will
be disabled.
LAN Network Interface [UnLock]
Wireless Network Interface [UnLock]
HD AUDIO Interface [UnLock]
USB Interface Security
LAN Network Interface

→← : Select Screen
Lock ↑↓ : Select Item
UnLock Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized
Defaults
F10 : Save & Exit
ESC : Exit
To lock an interface:
1. On the Security screen, select I/O Interface Security.
2. Select an interface you would like to lock then press

.
3. Select Lock.
USB Interface Security
Through the I/O Interface Security menu, you can also access USB
Interface Security to lock or unlock ports and devices.
Security
USB Interface Security If Locked, all

USB device will
be disabled
USB Interface [UnLock]
External Ports [UnLock]
CMOS Camera [UnLock]
Card Reader [UnLock]
USB Interface
Lock →← : Select Screen
UnLock Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized
Defaults
F10 : Save & Exit
ESC : Exit
To lock the USB interface:
1. On the Security screen, select I/O Interface Security > USB

Interface Security.
2. Select an interface that you would like to lock then select

Lock.
NOTE: Setting the USB Interface to Lock also locks and hides the
External Ports and other devices included under USB Interface Security.
Set Master Password
In the Security menu, you can use Set Master Password to set up
a password-enabled access to your hard disk drive.
Main Setup
Aptio Advanced
UtilityBoot Security(C) Save
- Copyright 2011 &American
Exit Megatrends, Inc.
Password Description
Set HDD Master
If ONLY the Administrator’s password is Password.
set,then this only limits access to Setup
***Advisable to
and is only asked for when entering Setup.
Power Cycle System
If ONLY the user’s password is set, then
after Setting Hard
this is a power on password and must be
Disk Passwords***
entered to boot or enter Setup. In Setup,
the User will have Administrator rights.
Administrator Password Status NOT INSTALLED

User Password Status NOT INSTALLED
Administrator Password
User Password →← : Select Screen
HDD Password Status : NOT INSTALLED
Enter: Select
Set Master Password +/— : Change Opt.
F1 : General Help
Set User Password
F9 : Optimized
I/O Interface Security Defaults
F10 : Save & Exit
ESC : Exit
To set the HDD password:
1. On the Security screen, select Set Master Password.
2. Type in a password then press .
3. Re-type to confirm the password then press .
4. Select Set User Password then repeat the previous steps to

set up the user password.
Save & Exit
To keep your configuration settings, select Save Changes and Exit
before exiting the BIOS.
Save Changes and Exit Exit system setup

after saving the
Discard Changes and Exit changes.
Save Options
Save Changes
Discard Changes
Restore Defaults
Boot Override
Windows Boot Manager →← : Select Screen
Launch EFI Shell from filesystem device Enter: Select
+/— : Change Opt.
F1 : General Help
F10 : Save & Exit
ESC : Exit
To update the BIOS:
1. Verify the Notebook PC’s exact model then download the latest
BIOS file for your model from the ASUS website.
2. Save a copy of the downloaded BIOS file to a flash disk drive.
3. Connect your flash disk drive to your Notebook PC.
4. Restart your Notebook PC then press during POST.
5. From the BIOS menu, select Advanced > Start Easy Flash, then
press .

Start Easy Flash Press Enter to run

the utility to
Internal Pointing Device [Enabled] select and update
Wake on Lid Open [Enabled] BIOS.
Power Off Energy Saving [Enabled]
SATA Configuration
Graphics Configuration
Intel (R) Anti-Theft Technology Corporation
USB Configuration
Network Stack →← : Select Screen
Enter: Select
+/— : Change Opt.
F1 : General Help
F10 : Save & Exit
ESC : Exit
6. Locate your downloaded BIOS file in the flash disk drive then
press .
ASUSTek Easy Flash Utility

FLASH TYPE: Generic Flash Type
Current BIOS New BIOS

Platform: K401/K501 Platform: Unknown
Version: 101 Version: Unknown
Build Date: Apr 26 2015 Build Date: Unknown
Build Time: 11:51:05 Build Time: Unknown
FSO 0 EFI
<DIR>
FS1
FS2
FS3
FS4
[←→]: Switch [↑↓]: Choose [q]: Exit [Enter]: Enter/Execute
7. After the BIOS update process, select Exit > Restore Defaults to
restore the system to its default settings.
Recovering your system
Using recovery options on your Notebook PC allows you to restore the
system to its original state or simply refresh its settings to help improve
performance.
IMPORTANT!
• Backup all your data files before doing any recovery option on your
Notebook PC.
• Note down important customized settings such as network settings,

user names, and passwords to avoid data loss.
• Ensure that your Notebook PC is plugged in to a power source before

resetting your system.
Windows® 10 allows you to do any of the following recovery options:
• Keep my files - This option allows you refresh your Notebook

PC without affecting personal files (photos, music, videos,
documents).
Using this option, you can restore your Notebook PC to its default
settings and delete other installed apps.
• Remove everything - This option resets your Notebook PC to
its factory settings. You must backup your data before doing this
option.
• Go back to an earlier build - This option allows you to go back
to an earlier build. Use this option if this build is not working for
you.
• Advanced startup - Using this option allows you to perform
other advanced recovery options on your Notebook PC such as:
- Using a USB drive, network connection or Windows recovery
DVD to startup your Notebook PC.
- Using Troubleshoot to enable any of these advanced

recovery options: System Restore, System Image Recovery,
Startup Repair, Command Prompt, UEFI Firmware Settings,
and Startup Settings.
Performing a recovery option

Refer to the following steps if you want to access and use any of the
available recovery options for your Notebook PC.
1. Launch Settings and select Update and security.
2. Under the Update and security option, select Recovery then
select the recovery option you would like to perform.
Tips and FAQs
Useful tips for your Notebook PC
To help you maximize the use of your Notebook PC, maintain its system
performance, and ensure all your data are kept secured, here are some
useful tips that you can follow:
• Update Windows® periodically to ensure that your applications

have the latest security settings.
• Use an anti-virus software to protect your data and keep this
updated too.
• Unless absolutely necessary, refrain from using force shutdown to
turn off your Notebook PC.
• Always backup your data and make it a point to create a backup
data in an external storage drive.
• Refrain from using the Notebook PC at extremely high
temperatures. If you are not going to use your Notebook PC for a
long period of time (at least a month), we recommend that you
take out the battery if the battery is removable.
• Disconnect all external devices and ensure you have the following
items prior to resetting your Notebook PC:
- Product key for your operating systems and other installed
applications
- Backup data
- Log in ID and password
- Internet connection information
Hardware FAQs
1. A black dot, or sometimes a colored dot, appears onscreen
when I turn on the Notebook PC. What should I do?
Although these dots normally appear onscreen, they will not
affect your system. If the incident continues and subsequently
affects system performance, consult an authorized ASUS service
center.
2. My display panel has an uneven color and brightness. How

can I fix this?
The color and brightness of your display panel may be affected
by the angle and current position of your Notebook PC. The
brightness and color tone of your Notebook PC may also vary per
model. You may use the function keys or the display settings in
your operating system to adjust the appearance of your display
panel.
3. How can I maximize my Notebook PC ‘s battery life?

You can try doing any of the following suggestions:
• Use the function keys to adjust the display brightness.
• If you are not using any Wi-Fi connection, switch your

system into Airplane mode.
• Disconnect unused USB devices.
• Close unused applications, especially those that take up too

much system memory.
4. My battery charge indicator does not light up. What’s wrong?
• Check whether the power adapter or battery pack is
attached correctly. You may also disconnect the power
adapter or battery pack, wait for a minute, then reconnect
them again to the power outlet and Notebook PC.
• If the problem still exists, contact your local ASUS service

center for assistance.
5. Why is my touchpad not working?
Press to enable your touchpad.
6. When I play audio and video files, why can’t I hear any sound
from my Notebook PC’s audio speakers?
• Press to turn up the speaker volume.
• Check if your speakers were set to mute.
• Check if a headphone jack is connected to your Notebook

PC and remove it.
7. What should I do if my Notebook PC’s power adapter gets lost

or my battery stops working?
Contact your local ASUS service center for assistance.
8. My Notebook PC cannot do keystrokes correctly because my
cursor keeps on moving. What should I do?
Make sure that nothing accidentally touches or presses on your
touchpad while you type on the keyboard. You can also disable
your touchpad by pressing .
9. Instead of showing letters, pressing the “U”, “I”, and “O” keys
on my keyboard displays numbers. How can I change this?
Press the key or (on selected models) on your

Notebook PC to turn off this feature and use the said keys for
inputting letters.
Software FAQs
1. When I turn on my Notebook PC, the power indicator lights
up but nothing appears on my screen. What can I do to fix
this?
• Force shutdown your Notebook PC by pressing the power

button for at least four (4) seconds. Check if the power
adapter and battery pack are inserted correctly then turn on
your Notebook PC.

2. What should I do when my screen displays this message:

“Remove disks or other media. Press any key to restart.”?
• Remove all connected USB devices then restart your

Notebook PC.
• Remove any optical discs that are left inside the optical drive
then restart.
• If the problem still exists, your Notebook PC might have a

memory storage problem. Contact your local ASUS service
3. My Notebook PC boots slower than usual and my operating

system lags. How can I fix this?
Delete the applications you recently installed or were not
included with your operating system package then restart your
system.
4. My Notebook PC does not boot up. How can I fix this?
• Remove all connected devices to your Notebook PC then

restart your system.

5. Why can’t my Notebook PC wake up from sleep mode?

• You need to press the power button to resume your last
working state.
• Your system might have completely used up its battery

power. Connect the power adapter to your Notebook PC
and connect to a power outlet then press the power button.
Appendices
DVD-ROM Drive Information
The DVD-ROM drive allows you to view and create your own CDs and DVDs. You
can purchase an optional DVD viewer software to view DVD titles.
NOTE: The DVD-ROM Drive is available on selected models.
Regional Playback Information

Playback of DVD movie titles involves decoding MPEG2 video, digital AC3 audio
and decryption of CSS protected content. CSS (sometimes called copy guard) is
the name given to the content protection scheme adopted by the motion picture
industry to satisfy a need to protect against unlawful content duplication.
Although the design rules imposed on CSS licensors are many, one rule that is
most relevant is playback restrictions on regionalized content. In order to facilitate
geographically staggered movie releases, DVD video titles are released for
specific geographic regions as defined in “Region Definitions” below. Copyright
laws require that all DVD movies be limited to a particular region (usually coded
to the region at which it is sold). While DVD movie content may be released for
multiple regions, CSS design rules require that any system capable of playing CSS
encrypted content must only be capable of playing one region.
IMPORTANT! The region setting may be changed up to five times using the viewer
software, then it can only play DVD movies for the last region setting. Changing the
region code after that will require factory resetting which is not covered by warranty. If
resetting is desired, shipping and resetting costs will be at the expense of the user.
Region Definitions
Region 1
Canada, US, US Territories
Region 2
Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland, Iran,
Iraq, Ireland, Italy, Japan, Netherlands, Norway, Poland, Portugal, Saudi Arabia,
Scotland, South Africa, Spain, Sweden, Switzerland, Syria, Turkey, UK, Greece,
Former Yugoslav Republics, Slovakia
Region 3
Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore, Taiwan, Thailand,

Vietnam
Region 4
Australia, Caribbean (Except US Territories), Central America, New Zealand, Pacific

Islands, South America
Region 5
CIS, India, Pakistan, Rest of Africa, Russia, North Korea
Region 6
China
Blu-ray ROM Drive Information
The Blu-ray ROM Drive allows you to view HD (High-Definition) videos and other
disc file formats such as DVDs and CDs.
NOTE: The Blue-ray ROM Drive is available on selected models.
Region Definitions
Region A
North, Central and South American countries, and their territories; Taiwan, Hong
Kong, Macao, Japan, Korea (South and North), South East Asian countries and their
territories.
Region B
European, African, and South West Asian countries and their territories; Australia
and New Zealand.
Region C
Central, South Asian, Eastern European countries and their territories; China and
Mongolia.
NOTE: Refer to Blu-ray Disc website at www.blu-raydisc.com/en/Technical/FAQs/Blu-

rayDiscforVideo.aspx for more details.
Internal Modem Compliancy

The Notebook PC with internal modem model complies with JATE (Japan), FCC
(US, Canada, Korea, Taiwan), and CTR21. The internal modem has been approved
in accordance with Council Decision 98/482/EC for pan-European single terminal
connection to the public switched telephone network (PSTN). However due
to differences between the individual PSTNs provided in different countries,
the approval does not, of itself, give an unconditional assurance of successful
operation on every PSTN network termination point. In the event of problems you
should contact your equipment supplier in the first instance.
Overview
On 4th August 1998 the European Council Decision regarding the CTR 21 has
been published in the Official Journal of the EC. The CTR 21 applies to all non
voice terminal equipment with DTMF-dialling which is intended to be connected
to the analogue PSTN (Public Switched Telephone Network).
CTR 21 (Common Technical Regulation) for the attachment requirements for

connection to the analogue public switched telephone networks of terminal
equipment (excluding terminal equipment supporting the voice telephony
justified case service) in which network addressing, if provided, is by means of
dual tone multi-frequency signalling.
Network Compatibility Declaration

Statement to be made by the manufacturer to the Notified Body and the vendor:
“This declaration will indicate the networks with which the equipment is designed
to work and any notified networks with which the equipment may have inter-
working difficulties.”
Statement to be made by the manufacturer to the user: “This declaration will

indicate the networks with which the equipment is designed to work and any
notified networks with which the equipment may have inter-working difficulties.
The manufacturer shall also associate a statement to make it clear where network
compatibility is dependent on physical and software switch settings. It will also
advise the user to contact the vendor if it is desired to use the equipment on
another network.”
Up to now the Notified Body of CETECOM issued several pan-European approvals

using CTR 21. The results are Europe’s first modems which do not require
regulatory approvals in each individual European country.
Non-Voice Equipment
Answering machines and loud-speaking telephones can be eligible as well as
modems, fax machines, auto-dialers and alarm systems. Equipment in which the
end-to-end quality of speech is controlled by regulations (e.g. handset telephones
and in some countries also cordless telephones) is excluded.
This table shows the countries currently under the CTR21
standard.
Country Applied More Testing
Austria1 Yes No
Belgium Yes No
Czech Republic No Not Applicable
Denmark1 Yes Yes
Finland Yes No
France Yes No
Germany Yes No
Greece Yes No
Hungary No Not Applicable
Iceland Yes No
Ireland Yes No
Italy Still Pending Still Pending
Israel No No
Lichtenstein Yes No
Luxemburg Yes No
The Netherlands1 Yes Yes
Norway Yes No
Poland No Not Applicable
Portugal No Not Applicable
Spain No Not Applicable
Sweden Yes No
Switzerland Yes No
United Kingdom Yes No
This information was copied from CETECOM and is supplied without liability. For
updates to this table, you may visit http://www.cetecom.de/technologies/ctr_21.
html.
1 National requirements will apply only if the equipment may use pulse dialling
(manufacturers may state in the user guide that the equipment is only intended to
support DTMF signalling, which would make any additional testing superfluous).
In The Netherlands additional testing is required for series connection and caller
ID facilities.
Federal Communications Commission

Interference Statement
This device complies with FCC Rules Part 15. Operation is subject to the following
two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference

that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the Federal Communications Commission
(FCC) rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! The use of a shielded-type power cord is required in order to meet

FCC emission limits and to prevent interference to the nearby radio and television
reception. It is essential that only the supplied power cord be used. Use only shielded
cables to connect I/O devices to this equipment. You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance could
void your authority to operate the equipment.
(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993.
Washington DC: Office of the Federal Register, National Archives and Records
Administration, U.S. Government Printing Office.)
Declaration of Conformity (R&TTE directive

1999/5/EC)
The following items were completed and are considered relevant and sufficient:
• Essential requirements as in [Article 3]
• Protection requirements for health and safety as in [Article 3.1a]
• Testing for electric safety according to [EN 60950]
• Protection requirements for electromagnetic compatibility in [Article 3.1b]
• Testing for electromagnetic compatibility in [EN 301 489-1] &

[EN 301 489-17]
• Effective use of the radio spectrum as in [Article 3.2]
• Radio test suites according to [EN 300 328-2]
FCC Radio Frequency (RF) Exposure Caution
Statement
WARNING! Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.
“The manufacture declares that this device is limited to Channels 1 through 11 in the
2.4GHz frequency by specified firmware controlled in the USA.”
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with FCC RF exposure
compliance requirements, please avoid direct contact to the transmitting antenna
during transmitting. End users must follow the specific operating instructions for
satisfying RF exposure compliance.
CE Marking
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements of the EEC
directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low
voltage directive”.
CE marking for devices with wireless LAN/Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the

European Parliament and Commission from 9 March, 1999 governing Radio and
Telecommunications Equipment and mutual recognition of conformity.
IC Radiation Exposure Statement for Canada
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with IC RF exposure
compliance requirements, please avoid direct contact to the transmitting antenna
during transmitting. End users must follow the specific operating instructions for
satisfying RF exposure compliance.
Operation is subject to the following two conditions:
• This device may not cause interference and
• This device must accept any interference, including interference that may
cause undesired operation of the device.
To prevent radio interference to the licensed service (i.e. co-channel Mobile
Satellite systems) this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that
is installed outdoors is subject to licensing.
This device complies with Industry Canada licence-exempt RSS standard(s).
Déclaration d’Industrie Canada relative à
l’exposition aux ondes radio
Cet appareil est conforme aux limites d’exposition aux radiations d’Industrie
Canada définies pour un environnement non-contrôlé. Pour maintenir la
conformité avec les exigences d’exposition RF d’IC, veuillez éviter tout contact
direct avec l’antenne pendant l’émission. Les utilisateurs finaux doivent suivre
les instructions de fonctionnement spécifiques pour satisfaire la conformité aux
expositions RF.
Son utilisation est sujette aux deux conditions suivantes:
• Cet appareil ne peut pas causer d’interférence, et
• Cet appareil doit accepter toute interférence, y compris les interférences

qui pourraient causer un fonctionnement non souhaité de l’appareil.
Pour éviter les interférences radio avec le service sous licence (c’est à-dire le
partage de canal avec les systèmes de téléphonie satellite), cet appareil est destiné
à être utilisé en intérieur et loin des fenêtres pour fournir un blindage maximal.
Tout appareil (ou son antenne d’émission) qui est installé en extérieur est sujet à
cette licence.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence.
Wireless Operation Channel for Different
Domains
N. America 2.412-2.462 GHz Ch01 through CH11
Japan 2.412-2.484 GHz Ch01 through Ch14
Europe ETSI 2.412-2.472 GHz Ch01 through Ch13
France Restricted Wireless Frequency Bands

Some areas of France have a restricted frequency band. The worst case maximum
authorized power indoors are:
• 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)
• 100mW for frequencies between 2446.5 MHz and 2483.5 MHz
NOTE: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5
MHz.
There are few possibilities for outdoor use: on private property or on the private
property of public persons, use is subject to a preliminary authorization procedure
by the Ministry of Defense, with maximum authorized power of 100mW in the
2446.5–2483.5 MHz band. Use outdoors on public property is not permitted.
In the departments listed below, for the entire 2.4 GHz band:
• Maximum authorized power indoors is 100mW
• Maximum authorized power outdoors is 10mW
Departments in which the use of the 2400–2483.5 MHz band is permitted with an
EIRP of less than 100mW indoors and less than 10mW outdoors:
01 Ain 02 Aisne 03 Allier

05 Hautes Alpes 08 Ardennes 09 Ariège
11 Aude 12 Aveyron 16 Charente
24 Dordogne 25 Doubs 26 Drôme
32 Gers 36 Indre 37 Indre et Loire
41 Loir et Cher 45 Loiret 50 Manche
55 Meuse 58 Nièvre 59 Nord
60 Oise 61 Orne 63 Puy du Dôme
64 Pyrénées Atlantique 66 Pyrénées Orientales 67 Bas Rhin
68 Haut Rhin 70 Haute Saône 71 Saône et Loire
75 Paris 82 Tarn et Garonne 84 Vaucluse
88 Vosges 89 Yonne 90 Territoire de Belfort
94 Val de Marne
This requirement is likely to change over time, allowing you to use your wireless
LAN card in more areas within France. Please check with ART for the latest
information (www.arcep.fr)
NOTE: Your WLAN Card transmits less than 100mW, but more than 10mW.
UL Safety Notices
Required for UL 1459 covering telecommunications (telephone) equipment
intended to be electrically connected to a telecommunication network that has an
operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak,
and 105V rms, and installed or used in accordance with the National Electrical
Code (NFPA 70).
When using the Notebook PC modem, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons, including
the following:
• DO NOT use the Notebook PC near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
• DO NOT use the Notebook PC during an electrical storm. There may be a

remote risk of electric shock from lightning.
• DO NOT use the Notebook PC in the vicinity of a gas leak.

Required for UL 1642 covering primary (non-rechargeable) and secondary
(rechargeable) lithium batteries for use as power sources in products. These
batteries contain metallic lithium, or a lithium alloy, or a lithium ion, and may
consist of a single electrochemical cell or two or more cells connected in series,
parallel, or both, that convert chemical energy into electrical energy by an
irreversible or reversible chemical reaction.
• DO NOT dispose the Notebook PC battery pack in a fire, as they may

explode. Check with local codes for possible special disposal instructions
to reduce the risk of injury to persons due to fire or explosion.
• DO NOT use power adapters or batteries from other devices to reduce

the risk of injury to persons due to fire or explosion. Use only UL certified
power adapters or batteries supplied by the manufacturer or authorized
retailers.
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg
must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm2 or
H05VV-F, 2G, 0.75mm2.
TV Notices
Note to CATV System Installer—Cable distribution system should be grounded
(earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC),
in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial
Cable – installation should include bonding the screen of the coaxial cable to the
earth at the building entrance.
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and
Restriction of Chemicals) regulatory framework, we publish the chemical
substances in our products at ASUS REACH website at http://csr.asus.com/english/
REACH.htm.
Macrovision Corporation Product Notice

This product incorporates copyright protection technology that is protected by
method claims of certain U.S.A. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation . Reverse engineering or disassembly is
prohibited.
Prevention of Hearing Loss

To prevent possible hearing damage, do not listen at high volume
levels for long periods.
Nordic Lithium Cautions (for lithium-ion
batteries)
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions. (English)
ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato.

Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla
fabbrica. Non disperdere le batterie nell’ambiente. (Italian)
VORSICHT! Explosionsgefahr bei unsachgemäßen Austausch der Batterie. Ersatz

nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ.
Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (German)
ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning

må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri
tilbage til leverandøren. (Danish)
VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller

en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt
batteri enligt fabrikantens instruktion. (Swedish)
VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo

ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hävitä käytetty paristo
valmistagan ohjeiden mukaisesti. (Finnish)
ATTENTION! Il y a danger d’explosion s’il y a remplacement incorrect de la

batterie. Remplacer uniquement avec une batterie du mêre type ou d’un type
équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées
conformément aux instructions du fabricant. (French)
ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme

batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte
batterier kasseres i henhold til fabrikantens instruksjoner. (Norwegian)
(Japanese)
ВНИМАНИЕ! При замене аккумулятора на аккумулятор иного типа возможно

его возгорание. Утилизируйте аккумулятор в соответствии с инструкциями
производителя. (Russian)
Optical Drive Safety Information
Laser Safety Information
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT
WARNING! To prevent exposure to the optical drive’s laser, do not attempt to

disassemble or repair the optical drive by yourself. For your safety, contact a
professional technician for assistance.
Service warning label
WARNING! INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR
VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976.
These regulations apply to laser products manufactured from August 1, 1976.
Compliance is mandatory for products marketed in the United States.
WARNING! Use of controls or adjustments or performance of procedures other

than those specified herein or in the laser product installation guide may result in
hazardous radiation exposure.
Coating Notice
IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating

is applied to insulate the device except on the areas where the I/O ports are located.
CTR 21 Approval (for Notebook PC with built-in
Modem)
Danish
Dutch
English
Finnish
French

German
Greek
Italian
Portuguese
Spanish
Swedish

ENERGY STAR complied product
ENERGY STAR is a joint program of the U.S. Environmental
Protection Agency and the U.S. Department of Energy helping
us all save money and protect the environment through energy
efficient products and practices.
All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR
standard, and the power management feature is enabled by default. The
monitor and computer are automatically set to sleep after 10 and 30 minutes
of user inactivity. To wake your computer, click the mouse or press any key on
the keyboard. Please visit http://www.energystar.gov/powermanagement for
detail information on power management and its benefits to the environment.
In addition, please visit http://www.energystar.gov for detail information on the
ENERGY STAR joint program.
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating systems.
Global Environmental Regulation Compliance

and Declaration
ASUS follows the green design concept to design and manufacture our products,
and makes sure that each stage of the product life cycle of ASUS product is in line
with global environmental regulations. In addition, ASUS disclose the relevant
information based on regulation requirements.
Please refer to http://csr.asus.com/english/Compliance.htm for information

disclosure based on regulation requirements ASUS is complied with:
Japan JIS-C-0950 Material Declarations
EU REACH SVHC
Korea RoHS

ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle our products, batteries, other
components as well as the packaging materials. Please go to http://csr.asus.com/
english/Takeback.htm for detailed recycling information in different regions.
Rechargeable Battery Recycling Service in

North America
For US and Canada customers, you can call 1-800-822-8837

(toll-free) for recycling information of your ASUS products’
rechargeable batteries.
Regional notice for California
WARNING! This product may contain chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm. Wash hands after handling.
Regional notice for Singapore

Complies with This ASUS product complies with IDA Standards.
IDA Standards
DB103778

Regional notice for India
This product complies with the “India E-waste (Management and Handling) Rule
2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated
biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations
exceeding 0.1 % by weight in homogenous materials and 0.01 % by weight
in homogenous materials for cadmium, except for the exemptions listed in
Schedule-II of the Rule.
Notices for removable batteries

• Risk of explosion if battery is replaced by an incorrect type.
• The battery and its component must be recycled or disposed of properly.
Avis concernant les batteries remplaçables

• La batterie de l’ordinateur portable peut présenter un risque d’incendie ou
de brûlure si celle-ci est retirée ou désassemblée.
• La batterie et ses composants doivent être recyclés de façon appropriée.

EC Declaration of Conformity
We, the undersigned,
Manufacturer: ASUSTeK COMPUTER INC.
Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Authorized representative in Europe: ASUS COMPUTER GmbH
Address, City: HARKORT STR. 21-23, 40880 RATINGEN
Country: GERMANY
declare the following apparatus:
Product name : Notebook PC
Model name : K501U, A501U, R516U, V502U, FX51U, V505U
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
EN 55022:2010+AC:2011 EN 55024:2010
EN 61000-3-2:2006+A2:2009 EN 61000-3-3:2013
EN 55013:2001+A1:2003+A2:2006 EN 55020:2007+A11:2011
1999/5/EC-R&TTE Directive
EN 300 328 V1.8.1(2012-06) EN 301 489-1 V1.9.2(2011-09)
EN 300 440-1 V1.6.1(2010-08) EN 301 489-3 V1.4.1(2002-08)
EN 300 440-2 V1.4.1(2010-08) EN 301 489-4 V1.4.1(2009-05)
EN 301 511 V9.0.2(2003-03) EN 301 489-7 V1.3.1(2005-11)
EN 301 908-1 V5.2.1(2011-05) EN 301 489-9 V1.4.1(2007-11)
EN 301 908-2 V5.2.1(2011-07) EN 301 489-17 V2.2.1(2012-09)
EN 301 893 V1.7.1(2012-06) EN 301 489-24 V1.5.1(2010-09)
EN 302 544-2 V1.1.1(2009-01) EN 302 326-2 V1.2.2(2007-06)
EN 302 623 V1.1.1(2009-01) EN 302 326-3 V1.3.1(2007-09)
EN 50360:2001 EN 301 357-2 V1.4.1(2008-11)
EN 62479:2010 EN 302 291-1 V1.1.1(2005-07)
EN 50385:2002 EN 302 291-2 V1.1.1(2005-07)
EN 62311:2008 EN 50566:2013
2006/95/EC-LVD Directive
EN 60950-1: 2006 / A12: 2011 EN 60065:2002 / A12: 2011
EN 60950-1: 2006 / A2: 2013
2009/125/EC-ErP Directive
Regulation (EC) No. 1275/2008 Regulation (EC) No. 278/2009
Regulation (EC) No. 642/2009 Regulation (EU) No. 617/2013
2011/65/EU-RoHS Directive Ver. 150326
CE marking
(EC conformity marking)
Position : CEO
Name : Jerry Shen
Declaration Date: 18/09/2015

Year to begin affixing CE marking: 2015 Signature : __________

EC Declaration of Conformity
We, the undersigned,
Manufacturer: ASUSTeK COMPUTER INC.
Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Authorized representative in Europe: ASUS COMPUTER GmbH
Address, City: HARKORT STR. 21-23, 40880 RATINGEN
Country: GERMANY
declare the following apparatus:
Product name : Notebook PC
Model name : K401L, V401L, A401L, R415L ,
K401U, V401U, A401U, R415U
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
EN 55022:2010+AC:2011 EN 55024:2010
EN 61000-3-2:2006+A2:2009 EN 61000-3-3:2008
EN 55013:2001+A1:2003+A2:2006 EN 55020:2007+A11:2011
1999/5/EC-R&TTE Directive
EN 300 328 V1.8.1(2012-06) EN 301 489-1 V1.9.2(2011-09)
EN 300 440-1 V1.6.1(2010-08) EN 301 489-3 V1.4.1(2002-08)
EN 300 440-2 V1.4.1(2010-08) EN 301 489-4 V1.4.1(2009-05)
EN 301 511 V9.0.2(2003-03) EN 301 489-7 V1.3.1(2005-11)
EN 301 908-1 V5.2.1(2011-05) EN 301 489-9 V1.4.1(2007-11)
EN 301 908-2 V5.2.1(2011-07) EN 301 489-17 V2.2.1(2012-09)
EN 301 893 V1.7.1(2012-06) EN 301 489-24 V1.5.1(2010-09)
EN 302 544-2 V1.1.1(2009-01) EN 302 326-2 V1.2.2(2007-06)
EN 302 623 V1.1.1(2009-01) EN 302 326-3 V1.3.1(2007-09)
EN 50360:2001 EN 301 357-2 V1.4.1(2008-11)
EN 62479:2010 EN 302 291-1 V1.1.1(2005-07)
EN 50385:2002 EN 302 291-2 V1.1.1(2005-07)
EN 50566:2013 EN 62311:2008
2006/95/EC-LVD Directive
EN 60950-1: 2006 / A12: 2011 EN 60065:2002 / A12: 2011
EN 60950-1: 2006 / A2: 2013
2009/125/EC-ErP Directive
Regulation (EC) No. 1275/2008 Regulation (EC) No. 278/2009
Regulation (EC) No. 642/2009 Regulation (EU) No. 617/2013
2011/65/EU-RoHS Directive Ver. 150326
CE marking
(EC conformity marking)
Position : CEO
Name : Jerry Shen
Original Declaration Date: 20/03/2015

Corrected Declaration Date: 09/10/2015
Year to begin affixing CE marking: 2015 Signature : __________

153035

Uploaded by

Copyright:

Available Formats

153035

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

153035

Uploaded by

Copyright:

Available Formats

E10823

Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.

SERVICE AND SUPPORT

Visit our multi-language web site at http://support.asus.com

Chapter 1: Hardware Setup

Chapter 2: Using your Notebook PC

Chapter 4: Power-On Self-Test (POST)

Chapter 1: Hardware Setup

Chapter 2: Using your Notebook PC

Chapter 3: Working with Windows® 10

Chapter 4: Power-On Self-Test (POST)

Tips and FAQs

IMPORTANT! This message contains vital information that must be

WARNING! This message contains important information that must be

= Use the touchpad.

= Use the keyboard.

Refer to the rating label on the bottom of your

Do not leave your Notebook PC on your lap or near

Do not use damaged power cords, accessories, and

While powered on, ensure that you do not carry or

You can send your Notebook PC through x-ray

Disconnect the AC power and remove the battery

Do not use strong solvents such as thinners,

Do not place objects on top of your Notebook PC.

Do not expose your Notebook PC to strong

Do not use or expose your Notebook PC near

Do not expose your Notebook PC to dusty

Do not use your Notebook PC near gas leaks.

Do not throw the battery in municipal waste. The

NOTE: The keyboard's layout may vary per region or country.

WARNING! Ensure that paper, books, clothing, cables, or other

NOTE: The keyboard layout differs by model or territory.

Numeric keypad (on selected models)

NOTE: The bottom side may vary in appearance depending on model.

IMPORTANT! Battery time varies by usage and by the specifications for

WARNING! Ensure that paper, books, clothing, cables, or other

Memory card reader

Power (DC) input port

WARNING! The adapter may become warm to hot while in use.

IMPORTANT! Use only the bundled power adapter to charge the

NOTE: The maximum power output for this port is 5V/2A.

The power indicator lights up when the Notebook PC

Two-color battery charge indicator

Lights off The Notebook PC is running on

Drive activity indicator

NOTE: When enabled, the Airplane mode

Capital lock indicator

This indicator lights up when the capital lock

NOTE: The power adapter may vary in appearance, depending on models

Power adapter information:

• Input voltage: 100-240Vac

• Input frequency: 50/60Hz

• Rating output current: 14”/15”: 3.42A (65W)

• Rating output voltage: 19V

• Locate the input/output rating label on your Notebook PC and

• Ensure that your Notebook PC is connected to the power adapter

• To disconnect your Notebook PC from its main power supply, unplug

Read the following precautions for your Notebook PC’s battery:

• Only ASUS-authorized technicians should remove the battery inside

• Follow the warning labels for your personal safety.

• Rating output current: 14”/15”: 3.42A (65W)