paper 1
paper 1
paper 1
PHYSICS
SECTION-1 : (Maximum Marks : 24)
This section contains EIGHT (08) questions.
The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value of the answer using the mouse and the
on-screen virtual numeric keypad in the place designated to enter the answer. If the numerical
value has more than two decimal places, truncate/round-off the value to TWO decimal places.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 ONLY if the correct numerical value is entered;
®
Zero Marks : 0 In all other cases.
1. Two spherical stars A and B have densities A and B, respectively. A and B have the same radius,
and their masses MA and MB are related by MB = 2MA. Due to an interaction process, star A loses
some of its mass, so that its radius is halved, while its spherical shape is retained, and its density
remains A. The entire mass lost by A is deposited as a thick spherical shell on B with the density of
the shell being A. If A and B are the escape velocities from A and B after the interaction process,
10 n
the ratio B . The value of n is _______
A 151/3
Ans. 2.30
Sol. Given RA = RB = R
MB = 2MA
Calculate of escape velocity for A:
4 R3A M A
Mass of remaining star = A
3 8 8
RA
Radius of remaining star = .
2
GM A/B 1 2GMA/B GMA
mv 2A 0 v A
R A/2 2 R A/2 2R
1
Let the radius of B becomes r.
4 7 4 7 (15)1/3 R
(r 3 R 3B )A A R 3A 3 R3A R3B
3 8 3 8 2
VB2 23GMA 23GMA
2 8 151/3 R 4 151/3 R
2
23GM A
VB
2 151/3 R
VB 23 10 2.30
1/3
VA 15 151/3
n = 2.30
®
2. The minimum kinetic energy needed by an alpha particle to cause the nuclear reaction
16
7 N 24 He 11H 198 O in a laboratory frame is n (in MeV). Assume that 16
7 N is at rest in the
16 19
laboratory frame. The masses of 7 N, 24 He, 11 H and 8 O can be taken to be 16.006 u, 4.003 u,
1.008 u and 19.003 u, respectively, where 1 u = 930 MeVc–2. The value of n is_________.
Ans. 2.32 to 2.33
Sol. 16
7 N 24 He 11He 19
8 O
16
7 N + 4
2 He 1
1 He + 19
8 O
16.006 4.003 1.008 19.003
4v0 = 1v1 + 19v2 = 20v2 (For max loss of KE)
v2
v0
5
E required = (1.008 + 19.003 – 16.006 – 4.003) × 930 = 1.86
1 2 1
4v 0 20v 2 1.86
2 2
1 2 v2
4v 0 10 0 20v 2 1.86
2 25
2
2v 20 v 20 1.86
5
8 2
v 0 1.86
5
1.86 5
v 20
8
1 18.6 5
KE 4v 20 2v 20
2 4
= 2.325
2
3. In the following circuit C1 = 12 F, C2 = C3 = 4 F and C4 = C5 = 2 F. The Charge stored in C3
is _______ C.
C1
C2
6V C5 2V
C3 C4
Ans. 8
Sol. Potential difference across the terminals of C3 is 2V.
Q3 = CV = (4µ) (2) = 8µC
®
2
4. A rod of length 2 cm makes an angle rad with the principal axis of a thin convex lens. The lens
3
40
has a focal length of 10 cm and is placed at a distance of cm from the object as shown in the
3
30 3
figure. The height of the image is cm and the angle made by it with respect to the principal
13
axis is rad. The value of is rad, where n is _________.
n
2
3
30 3
40 cm
cm 13
3
Ans. 6
f=10cm 40cm
2cm
60°
Sol. 1cm
3
30 3
hi v 13 v v 430 cm
1
h0 u 3 43 13
3
1 1 1 1 1 3
* v 40cm
v u f v 10 40
430 90
* x 40 cm
13 13
30 3
1
tan 13 30
90 3 6
13
®
N = 6 Ans.
5. At time t = 0, a disk of radius 1 m starts to roll without slipping on a horizontal plane with an
2
angular acceleration of rad s–2. A small stone is stuck to the disk. At t = 0, it is at the
3
contact point of the disk and the plane. Later, at time t s, the stone detaches itself and flies off
tangentially from the disk. The maximum height (in m) reached by the stone measured from the
1 x
plane is . The value of x is______. [Take g = 10 m s–2.]
2 10
Ans. 0.52
R
R/ cm
Sol. 2
r = 0
t
2
r
3
1
t2
2
1 2
2 3 3
4
= 60°
v
h
60°
v
3
v y v sin 60 V
2
3 2
u 2yv
h 4
2g 2g
3 4
®
h 4 9
2g
3
h
9 2g 6g
R
Maximum height from plane, H h
2
1
H
2 6 10
x ; x = 0.52
6
6. A solid sphere of mass 1 kg and radius 1 m rolls without slipping on a fixed inclined plane with an
angle of inclination = 30° from the horizontal. Two forces of magnitude 1 N each, parallel to the
incline, act on the sphere, both at distance r = 0.5 m from the center of the sphere, as shown in the
figure. The acceleration of the sphere down the plane is______ms–2. (Take g = 10 m s–2 .)
r
r
5
Sol. Solid sphere 1kg, 1m
a
fr
5N
1N
30° x
5 + 1 – 1 – fr = 1a
5 – fr = a
About COM
2
fr 1 – 2(1(0.5)) = Mr 2 a
5
2 2
®
fr 1 a fr 1 a
5 5
2
5a a a
5
7a 20
4 a = 2.86 m/s2
5 70
7. Consider an LC circuit, with inductance L = 0.1 H and capacitance C = 10–3 F, kept on a plane. The
area of the circuit is 1 m2. It is placed in a constant magnetic field of strength B0 which is
perpendicular to the plane of the circuit. At time t = 0, the magnetic field strength starts increasing
linearly as B = B0 + t with = 0.04 Ts–1 . The maximum magnitude of the current in the circuit
is____mA.
Ans. 4
Sol. Maximum energy will be
q 20 1 2
LI 0
2C 2
q 02
I 20
CL
q
I0 0
LC
CV
I0
LC
C AdB
I0 V V emf
L dt
10 3
I0 0.04 V = (1 × 0.04)
0.1
Maximum current I0 = 0.004 = 4mA
Ans. (4)
6
8. A projectile is fired from horizontal ground with speed v and projection angle . When the
acceleration due to gravity is g, the range of the projectile is d. If at the highest point in its
trajectory, the projectile enters a different region where the effective acceleration due to gravity is
g
g' = , then the new range is d' = nd. The value of n is_______.
0.81
Ans. 0.95
v g
Sol. d
®
v 2 sin 2
d
g
u
v geff
t
d/2 d1
v 2 sin 2 1
H max ; g eff t 2 H max
2g 2
1 2H max
New range = d1 t 2
2 geff
2 v 2 sin 2
g
2g
0.81
d1 = vcost
v 2 sin 2 1.0
2 0.95d
g
n = 0.95
7
SECTION-2 : (Maximum Marks : 24)
This section contains SIX (06) questions.
Each question has FOUR options (A), (B), (C) and (D). ONE OR MORE THAN ONE of these
four option(s) is (are) correct answer(s).
For each question, choose the option(s) corresponding to (all) the correct answer(s).
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 ONLY if (all) the correct option(s) is(are) chosen;
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen;
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen,
both of which are correct;
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it
is a correct option;
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks : −2 In all other cases.
9. A medium having dielectric constant K >1 fills the space between the plates of a parallel plate
®
capacitor. The plates have large area, and the distance between them is d. The capacitor is
connected to a battery of voltage V. as shown in Figure (a). Now, both the plates are moved by a
d
distance of from their original positions, as shown in Figure (b).
2
d d d d
2 2
V V
Figure (a) Figure (b)
In the process of going from the configuration depicted in Figure (a) to that in Figure (b), which of
the following statement(s) is(are) correct?
(A) The electric field inside the dielectric material is reduced by a factor of 2K.
1
(B) The capacitance is decreased by a factor of .
K 1
(C) The voltage between the capacitor plates is increased by a factor of (K + 1).
(D) The work done in the process DOES NOT depend on the presence of the dielectric material.
Ans. (B)
8
Sol. For figure(a)
K
V K A
E0 ; C 0 kC0
d d
For figure(b)
®
K
V 0 A
V1 ; C' ;
K 1 2d d d / k
K0 A K C
C' C0 ; C '
(K 1)d K 1 K 1
10. The figure shows a circuit having eight resistances of 1 each, labelled R1 to R8, and two ideal
batteries with voltages 1 = 12 V and 2 = 6 V.
R6 R7
R2
2 R3 1 R1
R4
R5 R8
Sol.
From KC
i1 + i2 + i3 = 0
®
18 V 12 V 0 V
0
3/2 1/ 2 3/2
18 – V + 36 – 3V – V = 0
54 = 5V
54
2 x
5 18 v ' 0
1 1
108
18 3V '
5
198 66
v' V
5 3 5
36
I R1 7.2A
5
6
I R2 1.2A
5
24
I R3 4.8A
5
12
I R5 2.4A
5
10
11. An ideal gas of density = 0.2 kg m–3 enters a chimney of height h at the rate of = 0.8 kg s–1
from its lower end, and escapes through the upper end as shown in the figure. The cross-sectional
area of the lower end is A1 = 0.1 m2 and the upper end is A2 = 0.4 m2. The pressure and the
temperature of the gas at the lower end are 600 Pa and 300 K, respectively, while its temperature at
the upper end is 150 K. The chimney is heat insulated so that the gas undergoes adiabatic
expansion. Take g = 10 ms–2 and the ratio of specific heats of the gas = 2. Ignore atmospheric
pressure.
A2
®
A1
2
A2 = 0.4 m
P1 = 600 Pa
2
A1 = 0.1 m
T1 = 300 K
3
P1 = 0.2 kg/m
V1
dm
1A1v1 0.8 kg / s A
dt
0.8
v1 40m / s
0.2 0.1
11
g = 10 m/s2
=2
p1– T = Constant
r
P2 T1 1
P1 T2
2
300 1
P2 600
150
®
600
P2 150Pa
4
PM P
Now
RT T
1 P1 T1 150 300 1
2 P2 T2 600
150 2
1
2 = 0.1 kg/m3
2
0.8
Now 2A2v2 = 0.8 v 2 20m / s
0.1 0.4
1 1 f
P1A1x1 – P2A2x2 = mV22 mV12 mgh (P2 V2 P1V1 )
2 2 2
2 600 2 150 20 2 40 2
10h
0.2 0.1 2
h = 360 m
12
12. Three plane mirrors form an equilateral triangle with each side of length L. There is a small hole at
a distance l > 0 from one of the corners as shown in the figure. A ray of light is passed through the
hole at an angle and can only come out through the same hole. The cross section of the mirror
configuration and the ray of light lie on the same plane.
®
60° 30°
30°
13
60°
(B)
1
for = 60° & will come out after
2
L
®
(C) For & q = 60° ray will come out after give reflections.
3
L/3
30°
2L/3
30°
60° 60°
30°
2L/3
60°
60 L/4
°
L/4
14
13. Six charges are placed around a regular hexagon of side length a as shown in the figure. Five of
them have charge q, and the remaining one has charge x. The perpendicular from each charge to the
nearest hexagon side passes through the center O of the hexagon and is bisected by the side.
q
q 90° q
O
a
q q
®
x
30°
q
(B)
kq 2q 4
Enet 2
2d 40 4 3a 2
2
q
60a 2
7kq 7q 7q
(C) v
2d 40 3a 4 30 q
2kq 2q q
(D) v
2d 40 3a 2 30 q
Ans. (A,B,C)
15
14. The binding energy of nucleons in a nucleus can be affected by the pairwise Coulomb repulsion.
Assume that all nucleons are uniformly distributed inside the nucleus. Let the binding energy of a
proton be Ebp and the binding energy of a neutron be Ebn in the nucleus.
(A) Ebp – Ebn is proportional to Z(Z – 1) where Z is the atomic number of the nucleus.
1
(B) Ebp – Ebn is proportional to A 3 where A is the mass number of the nucleus.
®
(D) Ebp increases if the nucleus undergoes a beta decay emitting a positron.
Ans. (A,B,D)
Sol. Binding energy of proton & neutron due to nuclear force is same. So difference in binding energy is
E 0P E 0n = electrostatic P.E.
1 Z 1 e
2
Z
40 R
Where R = R0 A1/3
1 Z Z 1 e
2
40 1
R0A 3
Ans. (A,B,D)
16
SECTION-3 : (Maximum Marks : 12)
This section contains FOUR (04) Matching List Sets.
Each set has ONE Multiple Choice Question.
Each set has TWO lists : List-I and List-II.
List-I has Four entries (I), (II), (III) and (IV) and List-II has Five entries (P), (Q), (R), (S) and
(T).
FOUR options are given in each Multiple Choice Question based on List-I and List-II and ONLY
ONE of these four options satisfies the condition asked in the Multiple Choice Question.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 ONLY if the option corresponding to the correct combination is chosen;
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks : –1 In all other cases.
15. A small circular loop of area A and resistance R is fixed on a horizontal xy-plane with the center of
the loop always on the axis n̂ of a long solenoid. The solenoid has m turns per unit length and
®
carries current I counterclockwise as shown in the figure. The magnetic field due to the solenoid is
in n̂ direction. List-I gives time dependences of n̂ in terms of a constant angular frequency .
A2 02 m2 I 2
List-II gives the torques experienced by the circular loop at time t , Let .
6 2R
z z
y
x I
List-I List-II
(I) 1
2
sin t ˆj cos t kˆ
(P) 0
ˆ
(II) 1
2
sin t iˆ cos t ˆj
(Q)
4
i
3 ˆ
(III) 1
2
sin t iˆ cos t kˆ (R)
4
i
ˆ
(IV) 1
2
cos t iˆ sin t kˆ (S)
4
j
(T) 3 ˆ
i
4
17
0 mI
Sol. (I) B
2
sin t ˆj cos t kˆ
0 mI
B A cos t A
2
d 0 mIA
sin t
dt 2
0 mIA
i sin t
R 2R
®
mIA
2
M iA iA kˆ 0 sin t kˆ
2R
0 m 2 I 2 A 2
M B
2R
sin 2 t ˆi
î
4
0 mI
(II) B
2
sin t ˆi cos t ˆj
= 0, = 0, i = 0, t = 0
0 mI
(III) B
2
sin t ˆi cos t kˆ
0 mI
B A cos t A
2
d 0 mIA
sin t
dt 2
18
0 mIA
i sin t
R 2R
mIA
2
M iA iA kˆ 0 sin t kˆ
2R
0 m2 I 2 A2 2
M B
2R
sin t ˆj
ĵ
4
®
0 mI
(IV) B
2
cos t ˆj sin t kˆ
0 mI
B A sin t A
2
d 0 mIA
cos t
dt 2
mIA
i 0 cos t
R 2R
mIA
2
M iA iA kˆ 0 cos t kˆ
2R
0 m2 I 2 A2
M B
2R
cos2 t ˆi
cos2 ˆi
6
3
î
4
List-I List-II
(I) A and B are moving on a horizontal circle of radius 1 m with (P) 3 1
uniform angular speed = 1 rad s–1. The initial angular 2
positions of A and B at time t = 0 are = 0 and =
2
respectively.
y
B
®
x
A
(II) Projectiles A and B are fired (in the same vertical plane)
at t = 0 and t = 0.1 s respectively, with the same speed
(Q)
3 1
5 2
v m s–1 and at 45° from the horizontal plane. The
2
initial separation between A and B is large enough so that
they do not collide, (g = 10 m s–2 ).
t=0 t=0.1s
45° 45°
A B
xB=x0sin
B
x
A xA=x0sin
20
(IV) Particle A is rotating in a horizontal circular path of radius (S) 2
1 m on the xy plane, with constant angular speed = 1 rad s–1.
Particle B is moving up at a constant speed 3 m s–1 in the
vertical direction as shown in the figure. (Ignore gravity.)
z
3ms–1
B
A y
(T) 252 1
Which one of the following options is correct?
(A) I R, II T, III P, IV S
®
(B) I S, II P, III Q, IV R
(C) I S, II T, III P, IV R
(D) I T, II P, III R, IV S
Ans. (C)
Also, vA = vB = 1 m/s
So, vBA 2m / s
5 ˆ 5 ˆ
(II) u A i j
2 2
5 ˆ 5
vA i 10 ˆj
2 2 3
5 ˆ 5 ˆ
i j
2 6
5 ˆ 5 ˆ
uB i j
2 2
21
5 ˆ 5 ˆ
uB i 1 j
2 6
vB,A 5ˆi ˆj
vBA 252 1
(III) xA = sin t
1
v A cos t m / s
2
xB = cost
3
vB sin t m/s
2
3 1
vBA
®
2 2
(IV) vA & vB are always perpendicular
22
Sol. (I) U = Q – W
3
105 10 3 10 6 kJ
10 2250
103
= (2.25 – 0.0999) kJ
= (2.1501) kJ
(II) U = nCVT
5
nRT
2
5
0.2 8 1500 500 J
®
2
= 4 kJ
3
U nC V T P2 V2 P1V1
2
3 1 1
64 2 kJ
2 24 3
= 3 kJ
(IV) U nCV T
7
n R T
2
7
Q
9
= 7 kJ
Ans. (C); I-P, II-R, III-T, IV-Q
23
18. List I contains four combinations of two lenses (1 and 2) whose focal lengths (in cm) are indicated
in the figures. In all cases, the object is placed 20 cm from the first lens on the left, and the distance
between the two lenses is 5 cm. List II contains the positions of the final images.
List-I List-II
(I) f = +10 +15 (P) Final image is farmed at
7.5 cm on the right side of
O
lens 2.
20 cm 1 5 cm 2
(II) f = +10 –10 (Q) Final image is formed at
®
60.0 cm on the right side of
O
lens 2.
20 cm 1 5 cm 2
(III) f = +10 –20 (R) Final image is formed at
30.0 cm on the left side of
O
lens 2.
20 cm 1 5 cm 2
(IV) f = –20 +10 (S) Final image is formed at
6.0 cm on the right side of
O
lens 2.
20 cm 1 5 cm 2
(T) Final image is formed at
30.0 cm on the right side of
lens 2.
20 10 20
20 10
u2 = +15
v2
1515 7.5
15 15
(II) v1 = +20
u2 = +15
®
v2
15 10
(III) v1 = +20
u2 = +15
v2
15 20 60
15 20
(IV) v1
20 20 10
20 20
u2 = –15
v2
1510 30
15 10
Ans. (A), I-P, II-R, III-Q, IV-T
25
FINAL JEE(Advanced) EXAMINATION - 2022
(Held On Sunday 28th AUGUST, 2022)
PAPER-1 TEST PAPER WITH SOLUTION
CHEMISTRY
SECTION-1 : (Maximum Marks : 24)
This section contains EIGHT (08) questions.
The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value of the answer using the mouse and the
on-screen virtual numeric keypad in the place designated to enter the answer. If the numerical
value has more than two decimal places, truncate/round-off the value to TWO decimal places.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 ONLY if the correct numerical value is entered;
Zero Marks : 0 In all other cases.
®
1. 2 mol of Hg(g) is combusted in a fixed volume bomb calorimeter with excess of O2 at 298 K and
1 atm into HgO(s). During the reaction, temperature increases from 298.0 K to 312.8 K. If heat
capacity of the bomb calorimeter and enthalpy of formation of Hg(g) are 20.00 kJ K–1 and
61.32 kJ mol–1 at 298 K, respectively, the calculated standard molar enthalpy of formation of
HgO(s) at 298 K is X kJ mol–1. The value of |X| is ______.
[Given : Gas constant R = 8.3 J K–1 mol–1]
Ans. (90.39)
Sol. Qrxn = CT
|U| × 2 = 20 × 14.8
|U| = 148 kJ/mol
U = –148 kJ/mol
1
Hg(g) + O2(g) HgO(s) : U = –148 kJ/mol
2
H = U + ng RT
3 8.3
= – 148 – × 298 = –151.7101
2 1000
1
Hg(l) + O2(g) HgO(s)
2
1
2. The reduction potential (E0, in V) of MnO4– (aq)/Mn(s) is ______.
Ans. (0.77)
Sol.
®
Ans. = 0.77
3. A solution is prepared by mixing 0.01 mol each of H2CO3, NaHCO3, Na2CO3, and NaOH in
100 mL of water. pH of the resulting solution is ______.
[Given : pKa1 and pKa2 of H2CO3 are 6.37 and 10.32, respectively ; log 2 = 0.30]
Ans. (10.02)
Sol. H2CO3 + NaOH NaHCO3 + H2O
Milli moles 10 10 –
At end 0 0 10 + 10 = 20
Final mixture has 20 milli moles NaHCO3 and 10 milli moles Na2CO3
Salt
pH pKa 2 + log
Acid
10
pH pKa 2 + log [Buffer : Na2CO3 + NaHCO3]
20
= 10.32 – log 2 = 10.02
4. The treatment of an aqueous solution of 3.74 g of Cu(NO3)2 with excess KI results in a brown
solution along with the formation of a precipitate. Passing H2S through this brown solution gives
another precipitate X. The amount of X (in g) is ______.
[Given : Atomic mass of H = 1, N = 14, O = 16, S = 32, K = 39, Cu = 63, I = 127]
Ans. (0.32)
Sol. 2Cu(NO3)2 + 5KI Cu2I2 + KI3 + 4KNO3
0.02 0.01
KI3 + H2S S + KI + 2HI
0.01 0.01
nS = 0.01 mole
weight of sulphur = 32 × 0.01 = 0.32 gm
2
5. Dissolving 1.24 g of white phosphorous in boiling NaOH solution in an inert atmosphere gives a
gas Q. The amount of CuSO4 (in g) required to completely consume the gas Q is ______.
[Given : Atomic mass of H = 1, O = 16, Na = 23, P = 31, S = 32, Cu = 63]
Ans. (2.38 / 2.39)
1.24
Sol. Mole of P4 = 0.01
31 4
P4 + 3NaOH + 3H2O PH3 + 3NaH2PO2
0.01 mole 0.01 mole
2PH3 + 3CuSO4 Cu3P2 + 3H2SO4
3
0.01 × 0.01
2
®
0.03
= moles
2
0.03
WCuSO4 159 = 2.385 gm
2
Ans. = 2.38 or 2.39
6. Consider the following reaction.
OH
red phosphorous
Br2
R (major product)
Br
On estimation of bromine in 1.00 g of R using Carius method, the amount of AgBr formed (in g) is
______.
[Given : Atomic mass of H = 1, C = 12, O = 16, P = 31, Br = 80, Ag = 108]
Ans. (1.50)
OH Br
Red P
Br2
Sol. M.W. = 250 g/mol
Br Br (R)
1
1g R moles
250
2
No. of Br Atoms moles
250
2
Moles of AgBr moles
250
2
Mass of AgBr = (108 80) 1.504
250
3
7. The weight percentage of hydrogen in Q, formed in the following reaction sequence, is ______.
Cl
Ans. (1.31)
Cl OH
ONa
O2N NO2
C6H3N3O7
®
NaOH, 623 K Conc. H2SO4
Sol. 300 atm and Mass % of H
conc. HNO3 NO2
3
Picric = 100 1.31%
229
acid
8. If the reaction sequence given below is carried out with 15 moles of acetylene, the amount of the
product D formed (in g) is ______.
iron tube Cl 1. O2
(red hot) H3C 2. H3O+ CH3COCl
HCCH A B C D
AlCl3 pyridine
(80 %) (50 %) –CH3COCH3 (50 %) (100 %)
OH O–C–CH3
Cl
Iron H3C 1. O2 CH3COCl
3HC CH red hot 2. H3O
Pyridine
AlCl3
15 moles –CH3COCH3
4 mol 2 mol 1 mol 1 mol
80% yield 50% yield 100% yield
50% yield
C8H8O2
136 g
4
SECTION-2 : (Maximum Marks : 24)
This section contains SIX (06) questions.
Each question has FOUR options (A), (B), (C) and (D). ONE OR MORE THAN ONE of these
four option(s) is (are) correct answer(s).
For each question, choose the option(s) corresponding to (all) the correct answer(s).
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 ONLY if (all) the correct option(s) is(are) chosen;
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen;
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen,
both of which are correct;
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it
is a correct option;
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks : −2 In all other cases.
®
9. For diatomic molecules, the correct statement(s) about the molecular orbitals formed by the overlap
to two 2pz orbitals is(are)
(A) orbital has a total of two nodal planes.
(B) * orbital has one node in the xz-plane containing the molecular axis.
(C) orbital has one node in the plane which is perpendicular to the molecular axis and goes
through the center of the molecule.
(D) * orbital has one node in the xy-plane containing the molecular axis.
Ans. (A,D)
Sol.
5
10. The correct option(s) related to adsorption processes is(are)
(A) Chemisorption results in a unimolecular layer.
(B) The enthalpy change during physisorption is in the range of 100 to 140 kJ mol–1.
(C) Chemisorption is an endothermic process.
(D) Lowering the temperature favors physisorption processes.
®
Ans. (A,D)
Sol. (A) Chemisorption is unimolecular layered.
(B) Enthalpy of physisorption is much less in magnitude.
(C) Chemisorption of gases on solids is exothermic.
(D) As physisorption is exothermic so lowering temperature favours it.
11. The electrochemical extraction of aluminum from bauxite ore involves.
(A) the reaction of Al2O3 with coke (C) at a temperature > 2500°C.
(B) the neutralization of aluminate solution by passing CO2 gas to precipitate hydrated alumina
(Al2O3.3H2O)
(C) the dissolution of Al2O3 in hot aqueous NaOH.
(D) the electrolysis of Al2O3 mixed with Na3AlF6 to give Al and CO2.
Ans. (B,C,D)
Sol. (A) Electrochemical extraction of Aluminum from bauxite done below 2500°C
(B) 2Na[Al(OH)4]aq. + 2CO2(g) Al2O3.3H2O(s) + 2NaHCO3(aq.)
The sodium aluminate present in solution is neutralised by passing CO2 gas and hydrated Al2O3 is
precipitated.
(C) Al2O3(s) + 2NaOH(aq.) + 3H2O(l) 2Na[Al(OH)4]aq.
Concentration of bauxite is carried out by heating the powdered ore with hot concentrated
solution of NaOH
(D) In metallurgy of aluminum, Al2O3 is mixed with Na3AlF6
6
12. The treatment of galena with HNO3 produces a gas that is
Ans. (A,D)
13. Considering the reaction sequence given below, the correct statement(s) is(are)
O
1. N K
®
1. Br2, red phosphorous COOH
O
H3C COOH P 2. NaOH Q +
2. H2O
3. H3O+ COOH
COOH
Sol. OH
COOH+N2
7
14. Consider the following reaction sequence,
NO2
P R H2O
Q S T
H3C
U
COOH
®
(B) P = Sn/HCl R = HNO2 S=
H3C
N2 Cl OH
(C) S = T= U = 1. CH3CH2OH
H3C H3C
NO2 OH
(D) Q = R = H2/Pd, ethanol T=
HOOC H3C
Ans. (A,B,C)
Sol.
COOH
8
SECTION-3 : (Maximum Marks : 12)
This section contains FOUR (04) Matching List Sets.
Each set has ONE Multiple Choice Question.
Each set has TWO lists : List-I and List-II.
List-I has Four entries (I), (II), (III) and (IV) and List-II has Five entries (P), (Q), (R), (S) and
(T).
FOUR options are given in each Multiple Choice Question based on List-I and List-II and ONLY
ONE of these four options satisfies the condition asked in the Multiple Choice Question.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 ONLY if the option corresponding to the correct combination is chosen;
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks : –1 In all other cases.
15. Match the rate expressions in LIST-I for the decomposition of X with the corresponding profiles
®
provided in LIST-II. Xs and k constants having appropriate units.
LIST-I LIST-II
(I)
k X
rate
Xs X
half life (t1/2)
(P)
under all possible initial concentration of X
initial concentration of X
(II)
k X
rate
Xs X
half life (t1/2)
(Q)
where initial concentration of X are
much less than Xs
initial concentration of X
(III)
k X
rate
Xs X (R)
rate
9
(IV)
k X
2
rate
Xs X (S)
[X]
where initial concentration of X is
much higher than Xs
time
(T)
ln[X]
®
time
(A) I P; II Q; III S; IV T
(B) I R; II S; III S; IV T
(C) I P; II Q; III Q; IV R
(D) I R; II S; III Q; IV R
Ans. (A)
k[x] k
Sol. (I) rate
x s [x] x s
1
[x]
If [x] rate k order = 0
(I) – (R), (P)
k[x]
(II) [x] < < xs rate = order = 1
xs
®
(C) I T; II R; III Q; IV P (D) I Q; II R; III S; IV P
Ans. (D)
Sol. (P) Mg(HCO3)2 + 2Ca(OH)2 Mg(OH)2 + 2CaCO3 + 2H2O
(Q) BaO2 + H2SO4 H2O2 + BaSO4
(R) Ca(OH)2 + MgCl2 Mg(OH)2 + CaCl2
(S) BaO2 + 2HCl BaCl2 + H2O2
(T) Ca(HCO3)2 + Ca(OH)2 2CaCO3 + 2H2O
17. LIST-I contains metal species and LIST-II contains their properties.
LIST-I LIST-II
(I) [Cr(CN)6]4– (P) t2g orbitals contain 4 electrons
(II) [RuCl6]2– (Q) (spin-only) = 4.9 BM
2+
(III) [Cr(H2O)6] (R) low spin complex ion
2+
(IV) [Fe(H2O)6] (S) metal ion in 4+ oxidation state
(T) d4 species
[Given : Atomic number of Cr = 24, Ru = 44, Fe = 26]
Metal each metal species in LIST-I with their properties in LIST-II, and choose the correct option
(A) I R, T; II P, S; III Q, T; IV P, Q
(B) I R, S; II P, T; III P, Q; IV Q, T
(C) I P, R; II R, S; III R, T; IV P, T
(D) I Q, T; II S, T; III P, T; IV Q, R
Ans. (A)
11
Sol. (1) [Cr(CN)6]4–
Cr+2 = [Ar]18 3d44s0 ; low spin complex
P,R,T
(2) [RuCl6]2–
Ru+4 = [Kr]364d45s0 ; low spin complex
®
P,R,S,T
(3) [Cr(H2O)6]2+
Cr+2 = [Ar]183d44s0 ; high spin complex
Q,T
(4) [Fe(H2O)6]2+
Fe+2 = [Ar]183d6 ; High spin complex
P,Q
18. Match the compounds in LIST-I with the observation in LIST-II, and choose the correct option.
LIST-I LIST-II
(I) Aniline (P) Sodium fusion extract of the compound on
boiling with FeSO4, followed by acidification
with conc. H2SO4, gives Prussian blue color.
(II) o-Cresol (Q) Sodium fusion extract of the compound on
treatment with sodium nitroprusside gives
blood red color.
(III) Cysteine (R) Addition of the compound to a saturated
solution of NaHCO3 results in effervescence.
12
(IV) Coprolactam (S) The compound reacts with bromine water to
give a white precipitate.
(T) Treating the compound with neutral FeCl3
solution produces violet color.
(A) I P, Q; II S; III Q, R; IV P
(B) I P ; II R, S; III R; IV Q, S
(C) I Q, S; II P, T; III P; IV S
(D) I P, S; II T; III Q, R; IV P
Ans. (D)
NH2
®
Sol.
: Blue colour in Lassign test due to
presence of N
Aniline
Me
OH
:Violet colour with FeCl3 due to presence of phenolic
OH
o-Cresol
HS–CH2–CH–COOH
NH2 : It gives blod red colour with NaSCN
Cystein
e
N–H
O : Blue colour in Lassign test due to presence of N
Caprolactam
13
FINAL JEE(Advanced) EXAMINATION - 2022
(Held On Sunday 28th AUGUST, 2022)
PAPER-1 TEST PAPER WITH SOLUTION
MATHEMATICS
SECTION-1 : (Maximum Marks : 24)
This section contains EIGHT (08) questions.
The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value of the answer using the mouse and the
on-screen virtual numeric keypad in the place designated to enter the answer. If the numerical
value has more than two decimal places, truncate/round-off the value to TWO decimal places.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 ONLY if the correct numerical value is entered;
®
Zero Marks : 0 In all other cases.
1. Considering only the principal values of the inverse trigonometric functions, the value of
3 2 1 2 2 2
cos1 sin 1 tan 1
2 2 2
4 2 2
is ________.
Ans. (2.35 or 2.36)
2 π
Sol. cos 1 tan 1
2π 2
2
2 π2
2
π
2
1 2 2π
1 2
sin sin
2
π
2π
2
1
2
π
π 2 tan 1
2
1 2x 1
As, sin 1 x 2 π 2 tan x, x 1
2 π
and tan 1 cot 1
π 2
1
3 π 1 π π
Expression tan 1 π 2 tan 1 cot 1
2 2 4 2 2
3 2 π π π
tan 1 cot 1
2 4 2 4 2
π π π
tan 1 cot 1
2 2 4
π π 3π
2 4 4
= 2.35 or 2.36
2. Let 𝛼 be a positive real number. Let 𝑓: ℝ → ℝ and g : (𝛼, ∞) → ℝ be the functions defined by
®
x
f (x) sin and g(x)
2 log e x
.
12 log e e e
x
Ans. (0.50)
Sol.
2 n x α 0
form
n e e
lim
x α x α
0
1 1
.
x α 2 x
2 lim
x α 1 x 1
x α
.e .
e e 2 x
2 e e
x α
0
lim
e α x α
x α 0
x 1
e . 0
α lim 2
2 2 x
e x α 1
0
2 x
so, lim f g x lim f 2
x α x α
π 1
f 2 sin
6 2
= 0.50
2
3. In a study about a pandemic, data of 900 persons was collected. It was found that
190 persons had symptom of fever,
220 persons had symptom of cough,
220 persons had symptom of breathing problem,
330 persons had symptom of fever or cough or both,
350 persons had symptom of cough or breathing problem or both,
340 persons had symptom of fever or breathing problem or both,
30 persons had all three symptoms (fever, cough and breathing problem).
If a person is chosen randomly from these 900 persons, then the probability that the person has at
most one symptom is _____________.
®
Ans. (0.80)
Sol. n(U) = 900
Let A Fever, B Cough
C Breathing problem
n(A) = 190, n(B) = 220, n(C) = 220
n(A B) = 330, n(B C) = 350,
n(A C) = 340, n (A B C) = 30
Now n(AB) = n(A) + n(B) – n(AB)
330 = 190 + 220 – n(A B)
n(A B) = 80
Similarly,
350 = 220 + 220 – n(BC)
n(BC) = 90
and 340 = 190 + 220 – n(AC)
n(AC) = 70
n(ABC) = (190 + 220 + 220) – (80 + 90 + 70) + 30
= 660 – 240 = 420
Number of person without any symptom
= n () – n(A B C)
= 900 – 420 = 480
Now, number of person suffering from exactly one symptom
3
= (n(A) + n(B) + n(C)) – 2(n(A B) + n(B C) + n(C A)) + 3n(A B C)
= (190 + 220 + 220) – 2(80 + 90 + 70) + 3(30)
= 630 – 480 + 90 = 240
Number of person suffering from atmost one symotom
= 480 + 240 = 720
720 8 4
Probability = 0.80
900 10 5
4. Let 𝑧 be a complex number with non-zero imaginary part. If
2 3z 4z 2
2 3z 4z 2
®
is a real number, then the value of |𝑧|2 is _____________.
Ans. (0.50)
Sol. Given that
zz
2 3z 4z 2 2 3z 4z 6z
2
Let α
2 3z 4z 2 2 3z 4z 2
6z
α 1
2 3z 4z 2
If is a real number, then
αα
z z
2 3z 4z 2
2 3z 4z 2
2 z z 4zz z z
z z 2 4zz 0
As z z (Given)
2 1
zz
4 2
z 0.50
2
4
5. Let 𝑧 denote the complex conjugate of a complex number 𝑧 and let 𝑖 = 1 . In the set of complex
numbers, the number of distinct roots of the equation
𝑧 − 𝑧2 = (𝑧 + 𝑧2)
is _____________.
Ans. (4.00)
Sol. Given ,
z z2 i z z2
1 i z 1 i z2
1 i z z2
®
1 i
2i
z z2
2
z 2 i z
Let z = x + iy,
(x2 – y2) + i (2xy) = –i (x – iy)
so, x2 – y2 + y = 0 …(1)
and (2y + 1)x = 0 …(2)
1
x = 0 or y
2
Case I : When x = 0
(1) y(1 – y) = 0 y = 0,1
(0,0), (0,1)
1
Case II : When y
2
1 1 3 3
(1) x 2 0 x 2 x
4 2 4 2
3 1 3 1
, , ,
2 2 2 2
5
6. Let 𝑙1, 𝑙2,…, 𝑙100 be consecutive terms of an arithmetic progression with common difference 𝑑1, and
let 𝑤1, 𝑤2,…, 𝑤100 be consecutive terms of another arithmetic progression with common difference
𝑑2, where 𝑑1𝑑2 = 10. For each 𝑖 = 1, 2,…,100, let 𝑅𝑖 be a rectangle with length 𝑙𝑖, width 𝑤𝑖 and
area 𝐴𝑖. If 𝐴51 − 𝐴50 = 1000, then the value of 𝐴100 − 𝐴90 is ____________.
Ans. (18900.00)
Sol. Given
A51 A50 1000 51 w 51 50 w 50 1000
1 50d1 w1 50d2 1 49d1 w1 49d2 1000
1d2 w1d1 10 ….(1)
(As d1d2 = 10)
A100 A90 100 w100 90 w 90
®
1 99d1 w1 99d2 1 89d1 w1 89d2
10 1d 2 w1d1 992 892 d1d 2
10 10 99 89 99 89 10
10
(2) 3,4,
2 0 6,7 24
4 6
2,3,4
(3) 2 ,6,7
180
5 6 6
(4) 3 216
(1)
6 6 6
0,2
(5) 4 ,3,4 144
4 6 6
6
8. Let 𝐴𝐵𝐶 be the triangle with 𝐴𝐵 = 1, 𝐴𝐶 = 3 and ∠𝐵𝐴𝐶 = . If a circle of radius 𝑟 > 0 touches the
2
sides 𝐴𝐵, 𝐴𝐶 and also touches internally the circumcircle of the triangle 𝐴𝐵𝐶, then the value of 𝑟
is _____________.
Ans. (0.83 or 0.84)
C2
3 C1 (r,r)
1 3
®
,
2 2
1
A B
(0,0)
1 3 10
C1 , and r1
2 2 2
C2 = (r,r)
circle C2 touches C1 internally
10
C1C2 r
2
2
1 3 10
2 2
r r r
2 2 2
r 2 4r 10r 0
r = 0 (reject) or r 4 10
7
SECTION-2 : (Maximum Marks : 24)
This section contains SIX (06) questions.
Each question has FOUR options (A), (B), (C) and (D). ONE OR MORE THAN ONE of these
four option(s) is (are) correct answer(s).
For each question, choose the option(s) corresponding to (all) the correct answer(s).
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 ONLY if (all) the correct option(s) is(are) chosen;
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen;
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen,
both of which are correct;
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it
is a correct option;
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks : −2 In all other cases.
®
9. Consider the equation
e
(loge x)1/2
dx 1, a (,0) (1, ).
2
3/2
1 x a (log e x)
loge x
e 1/2
Sol. 1 1
x a log e x
3/2 2
Let a loge x t
3/2
log e x
1/2
2
dx dt
x 3
a 1 a 1
2 dt 2 1
3 a
t2
1
3 t a
2
1
3a a 1
3a2 – 3a – 2 = 0
3 33
a
6
8
10. Let 𝑎1, 𝑎2, 𝑎3,… be an arithmetic progression with 𝑎1 = 7 and common difference 8.
Let 𝑇1, 𝑇2, 𝑇3,… be such that 𝑇1 = 3 and 𝑇𝑛+1 − 𝑇𝑛 = 𝑎𝑛 for 𝑛 ≥ 1. Then, which of the following
is/are TRUE ?
(A) T20 = 1604
20
(B) k 1Tk 10510
(C) T30 = 3454
30
(D) k 1Tk 35610
Ans. (B,C)
®
Sol. a1 = 7, d = 8
Tn 1 Tn a n n 1
Sn T1 T2 T3 ... Tn 1 Tn
Sn T1 T2 T3 .... Tn 1 Tn
on subtraction
Tn = T1 + a1 + a2 + …. + an–1
Tn = 3 + (n – 1) (4n – 1)
Tn = 4n2 – 5n + 4
n
T
k 1
k 4 n 2 5 n 4n
T20 = 1504
T30 = 3454
30
T
k 1
k 35615
20
T
k 1
k 10510
9
11. Let 𝑃1 and 𝑃2 be two planes given by
𝑃1: 10𝑥 + 15𝑦 + 12𝑧 − 60 = 0,
𝑃2 : − 2𝑥 + 5𝑦 + 4𝑧 − 20 = 0.
Which of the following straight lines can be an edge of some tetrahedron whose two faces lie on
𝑃1 and 𝑃2 ?
x 1 y 1 z 1
(A)
0 0 5
x6 y z
(B)
5 2 3
®
x y4 z
(C)
2 5 4
x y4 z
(D)
1 2 3
Ans. (A,B,D)
x y4 z
Sol. line of intersection is
0 4 5
(1) Any skew line with the line of intersection of given planes can be edge of tetrahedron.
(2) any intersecting line with line of intersection of given planes must lie either in plane P1 or P2 can
be edge of tetrahedron.
12. Let 𝑆 be the reflection of a point 𝑄 with respect to the plane given by
where 𝑡, 𝑝 are real parameters and ˆi, ˆj, kˆ are the unit vectors along the three positive coordinate
axes. If the position vectors of 𝑄 and 𝑆 are 10iˆ 15ˆj 20kˆ and ˆi ˆj kˆ respectively, then
which of the following is/are TRUE ?
(A) 3( + ) = –101
(B) 3( + ) = –71
(C) 3( + ) = –86
(D) 3( + + ) = –121
Ans. (A,B,C)
10
Sol. r kˆ t ˆi ˆj p ˆi kˆ
n ˆi ˆj kˆ
x+y+z=1
Q(10,15,20) and S()
α 10 β 15 γ 20 10 15 20 1
2
1 1 1 111
88
3
58 43 28
α,β, γ , ,
®
3 3 3
3 10
(A) SQ1 = 2 (B) Q1Q2
5
(C) PQ1 = 3 (D) SQ2 = 1
Ans. (B,C,D)
Sol. Let equation of tangent with slope ‘m’ be
Q2
P
(–2,1)
S(1,0)
Q1 P
(1,–2)
1
T : y = mx +
m
T : passes through (–2, 1) so
1
1 = –2m +
m
11
1
m = –1 or m =
2
a 2a
Points are given by 2 ,
m m
So, one point will be (1, –2) & (4, 4)
Let P1(4, 4) & P2(1, –2)
P1S : 4x – 3y – 4 = 0
P2S : x – 1 = 0
4(2) 3(1) 4
PQ1 3
5
®
SP = 10 ; PQ2 = 3 ; SQ1 = 1 = SQ2
1 Q1Q2 1
10 3 1 (comparing Areas)
2 2 2
23 3 10
Q1Q 2
10 5
14. Let |𝑀| denote the determinant of a square matrix 𝑀. Let g : 0, → ℝ be the function defined by
2
g() f () 1 f 1
2
where
sin
cos tan
4 4
1 sin 1
1 4
f () sin 1 sin sin cos log e .
2 4 2
1 sin 1
cot loge tan
4 4
Let (𝑥) be a quadratic polynomial whose roots are the maximum and minimum values of the
function (𝜃), and (2) = 2 − 2 . Then, which of the following is/are TRUE ?
2 1 2
(A) p 0 (B) p 0
4 4
5 2 1 5 2
(C) p 0 (D) p 0
4 4
12
Ans. (A,C)
sin cos tan
4 4
1 sin 1
1 4
Sol. f() sin 1 sin sin cos log e
2 4 2
1 sin 1
cot log e tan
4 4
0 sin tan
4 4
2 sin 1
1 4
f() 0 1 sin sin 0 log e
2 4
0 sin 1
®
4
tan loge 0
4
f() = (1 + sin2) + 0 (skew symmetric)
g() f() 1 f 1
2
= |sin| + |cos| for 0,
2
g() 1, 2
2 2 k 2 2 (2 1)
P(x) x 2 (x 1)
3 2
for option (A) P 0 correct
4
1 3 2
option (B) P 0 incorrect
4
5 2 1
option (C) P 0 correct
4
5 2
option (D) P 0 incorrect
4
13
SECTION-3 : (Maximum Marks : 12)
This section contains FOUR (04) Matching List Sets.
Each set has ONE Multiple Choice Question.
Each set has TWO lists : List-I and List-II.
List-I has Four entries (I), (II), (III) and (IV) and List-II has Five entries (P), (Q), (R), (S) and
(T).
FOUR options are given in each Multiple Choice Question based on List-I and List-II and ONLY
ONE of these four options satisfies the condition asked in the Multiple Choice Question.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 ONLY if the option corresponding to the correct combination is chosen;
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks : –1 In all other cases.
15. Consider the following lists:
List-I List-II
®
2 2
(I) x , : cos x sin x 1 (P) has two elements
3 3
5 5
(II) x , : 3 tan 3x 1 (Q) has three elements
18 18
6 6
(III) x , : 2 cos(2x) 3 (R) has four elements
5 5
7 7
(IV) x , : sin x cos x 1 (S) has five elements
4 4
(T) has six elements
14
5 5
(II) x , : 3 tan 3x 1
18 18
1
3 tan 3x 1 tan 3x 3x n
3 6
x (6n 1) ;nZ
18
x 5
,
18 18
in given range has two solutions
6 6
(III) x , : 2 cos(2x) 3
5 5
®
2cos2x = 3
3
cos 2x cos
2 6
2x = 2n ;nZ
6
x = n ;nZ
12
x
12
, ,
12
12
Six solutions in given range
7 7
(IV) x , : sin x cos x 1
4 4
cosx – sinx = –1
1 3
cos x cos
4 2 4
3
x 2n ;nZ
4 4
x 2n or x = 2n – ; n Z
2
x 3
,
2 2
, , four solutions in given range
15
16. Two players, 𝑃1 and 𝑃2, play a game against each other. In every round of the game, each player
rolls a fair die once, where the six faces of the die have six distinct numbers. Let 𝑥 and 𝑦 denote the
readings on the die rolled by 𝑃1 and 𝑃2, respectively. If 𝑥 > 𝑦, then 𝑃1 scores 5 points and 𝑃2 scores
0 point. If 𝑥 = 𝑦, then each player scores 2 points. If 𝑥 < 𝑦, then 𝑃1 scores 0 point and 𝑃2 scores 5
points. Let 𝑋𝑖 and 𝑌𝑖 be the total scores of 𝑃1 and 𝑃2, respectively, after playing the 𝑖𝑡ℎ round.
List-I List-II
3
(I) Probability of (𝑋2 ≥ 𝑌2) is (P)
®
8
11
(II) Probability of (𝑋2 > 𝑌2) is (Q)
16
5
(III) Probability of (𝑋3 = 𝑌3) is (R)
16
355
(IV) Probability of (𝑋3 > 𝑌3) is (S)
864
77
(T)
432
16
5 5 5 1 45 5
P(X2 > Y2) = P(10,0) + P(7,2) = 2
12 12 12 6 144 16
5 5 1 1 25 2 3
P(X2 = Y2) = P(5,5) + P(4,4) = 2
12 12 6 6 72 8
1 5 1 5 2 75 77
P(X3 = Y3) = P(6,6) + P(7,7) = 6 =
6 6 6 12 6 12 432 432 432
1 77 355
P(X3 > Y3) = 1
2 432 864
17. Let 𝑝, 𝑞, 𝑟 be nonzero real numbers that are, respectively, the 10𝑡ℎ, 100𝑡ℎ and 1000𝑡ℎ terms of a
harmonic progression. Consider the system of linear equations
𝑥+𝑦+𝑧=1
10𝑥 + 100𝑦 + 1000𝑧 = 0
𝑞𝑟 𝑥 + 𝑝𝑟 𝑦 + 𝑝𝑞 𝑧 = 0.
®
List-I List-II
(I) q
If = 10, then the system of linear 10 1
r (P) x 0, y , z as a solution
9 9
equations has
(II) p
If 100, then the system of linear 10 1
r (Q) x , y , z 0 as a solution
9 9
equations has
(III) p
If 10, then the system of linear
q (R) infinitely many solutions
equations has
(IV) p
If = 10, then the system of linear
q (S) no solution
equations has
(T) at least one solution
17
q
Sol. If = 10 A = D Dx = Dy = Dz = 0
r
So, there are infinitely many solutions
Look of infinitely many solutions can be given as
x+y+z=1
& 10x + 100y + 1000z = 0 x + 10y + 100z = 0
Let z =
then x + y = 1 –
and x + 10y = –100
10 1
®
x 10 ; y 11
9 9
10 1
i.e., (x, y, z) 10, 11,
9 9
10 1
Q , , 0 valid for = 0
9 9
10 1
P 0, , not valid for any .
9 9
(I) Q,R,T
p
(II) If 100 , then Dy 0
r
So no solution
(II) (S)
p
(III) If 10 , then Dz 0 so, no solution
q
(III) (S)
p
(IV) If 10 Dz = 0 Dx = Dy = 0
q
so infinitely many solution
(IV) Q,R,T
18
18. Consider the ellipse
x2 y2
1.
4 3
Let (𝛼, 0), 0 < 𝛼 < 2, be a point. A straight line drawn through 𝐻 parallel to the 𝑦-axis crosses the
ellipse and its auxiliary circle at points 𝐸 and 𝐹 respectively, in the first quadrant. The tangent to the
ellipse at the point 𝐸 intersects the positive 𝑥-axis at a point 𝐺. Suppose the straight line joining 𝐹
and the origin makes an angle with the positive 𝑥-axis.
List-I List-II
®
If , then the area of the 3 1
4
(I) 4 (P)
triangle 𝐹𝐺𝐻 is 8
If , then the area of the
(II) 3 (Q) 1
triangle 𝐹𝐺𝐻 is
If , then the area of the 3
(III) 6 (R)
4
triangle 𝐹𝐺𝐻 is
If , then the area of the 1
(IV) 12 (S)
2 3
triangle 𝐹𝐺𝐻 is
3 3
(T)
2
19
Sol. Let F(2cos, 2sin) y
®
f() = 2tansin2
3 1 3 1
2 2 4
3 1
(IV) f 2 2 3 4 2 3
12 2 2 8 8
20