Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
18 views

CAPL (CAN Access Programming Language) code examples

CAPL Scripting understanding with examples

Uploaded by

Jaya Teja Chinta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
18 views

CAPL (CAN Access Programming Language) code examples

CAPL Scripting understanding with examples

Uploaded by

Jaya Teja Chinta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

CAPL (CAN Access

Programming
Language) code
examples
CAPL is used for creating
simulations, test cases, and
event-driven automation for
CAN (Controller Area
Network) and other
communication protocols like
LIN, FlexRay, and Ethernet.
CAPL Programming

01. Sending a CAN Message

Explanation:
This script sends a CAN message with ID 0x100 when
the simulation starts.
Data bytes 0x12 and 0x34 are loaded into the message.
CAPL Programming

02. Receiving a CAN Message

Explanation:
Triggers when a message with ID 0x200 is received.
The script prints the message's first data byte using
this.byte(0).
CAPL Programming

03. Periodic Message Transmission

Explanation:
Defines a periodic timer to send the message every 100ms.
The message data is updated before sending.
CAPL Programming

04. Logging Messages to a File

Explanation:
Logs all received CAN messages to a text file.
The script captures the message ID and the first two bytes of
data.
CAPL Programming

05. Simulating Button Input

Explanation:

When the 'A' key is pressed, a CAN message with ID 0x500


is sent.
This is useful for simulating user inputs.
CAPL Programming

06. Simulating a Diagnostic Request

Explanation:
Sends a diagnostic request with Service ID 0x10 (Start
Diagnostics).
Useful for testing diagnostic communication.
CAPL Programming

07. Simulating Error Frames

Explanation:
Monitors incoming messages with ID 0x400.
If the first byte is greater than 0x7F, an error is logged.
CAPL Programming

08. Using Timers

Explanation:
Creates a recurring timer that triggers every 500ms.
Useful for periodic tasks.
Was it Like

helpful? Comment

follow for more!


Share

Chetan Shidling
@chetan_shidling_ Save

www.cselectricalandelectronics.com

You might also like