AIR-AP3802E-E-K9 Datasheet

Get a Quote

Overview
AIR-AP3802E-E-K9 is one of the Cisco 3800 Series Access Points. The Cisco Aironet 3800 Wi-Fi access points are designed for large enterprise organizations that
rely on Wi-Fi to engage with customers. The 3800 series provides multiple gigabit uplink speeds of 2.5 Gbps and 5 Gbps in addition to 100-Mbps and 1-Gbps speeds.
It also delivers new 802.11ac Wave 2 standard. Cisco Aironet 3800 Series Wi-Fi access points are highly versatile and deliver the most functionality of any access
points in the industry. AIR-AP3802E-E-K9 is designed for Indoor, challenging environments, with external antennas. Besides, it provides E regulatory domain.

Quick Specs
Table 1 shows the quick specs of AIR-AP3802E-E-K9.

Product Code AIR-AP3802E-E-K9

Antennas External Antennas

Permit Antenna Gains Up to 6 dBi

- 2 Ethernet ports
- 100/1000/2500/5000 Multigigabit Ethernet (RJ-45)
- CAT 5e cabling
Interfaces
- Higher-quality 10GBASE-T (CAT 6/6a) cabling
- 100/1000BASE-T autosensing (RJ-45 - AUX port)
- Management console port (RJ-45)

- 4x4 MU-MIMO with three spatial streams

- MRC
- 802.11ac beamforming
- 20-, 40-, 80, 160-MHz channels
Features
- PHY data rates up to 5.2 Gbps
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 DFS
- CSD support

E (E regulatory domain):
- 2.412 to 2.472 GHz; 13 channels
Regulatory Domain - 5.180 to 5.320 GHz; 8 channels
- 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)

- 1024 MB DRAM
System
- 256 MB flash

Dimensions (W x L x H) 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm)

Net Weight 4.6 lb (2.09 kg)

Product Details
Figure 1 shows the appearance of the AIR-AP3802E.
· There are four antenna connectors and one LED indicator on the face of AIR-AP3802E.

Figure 2 shows ports and connections on the head of the AP.

Note:

(1) Kensington lock slot (5) AUX / Gigabit Ethernet port

(2) Mode button (6) PoE / mGig port

(3) Console port (7) 48 VDC power port

(4) USB port

Figure 3 shows the external connector ports of the AP.

Note:
 (1) Smart Antenna Connector

(2) Side Mount Modular Slot

Smart Antenna Connector: The 3800 series Access Points now support the capability of dual 5–GHz operation. When in this mode, a smart antenna connector
must be used on the external antenna models, as the additional 5–GHz radio cannot use the same top antennas on the access point that are being used by the
primary 5–GHz radio.

Side Mount Modular Slot: The AP 3800 has modularity support. This module design allows for installation onto the side of the access point. This allows for larger
antenna arrays and does not constrict the development of Cisco and potentially third party modules as they are no longer limited by the physical size of the access
point. Additionally, filtering is installed on the AP 3800 for cellular and other radio coexistence.

Supported External Antennas

Table 2 shows the supported external antennas of the AP.

Model Descriptions

AIR-ANT2524DB-R Cisco AIR-ANT2524DB-R 2.4 GHz 2 dBi/5 GHz 4 dBi Dipole Ant., Black, RP-TNC

AIR-ANT2524DG-R/= Cisco AIR-ANT2524DG-R 2.4 GHz 2 dBi/5 GHz 4 dBi Dipole Ant., Gray, RP-TNC

AIR-ANT2524DW-R/= Cisco AIR-ANT2524DW-R 2.4 GHz 2 dBi/5 GHz 4 dBi Dipole Ant., White, RP-TNC

AIR-ANT2566P4W-R= Cisco AIR-ANT2566P4W-R 2.4 GHz 6 dBi/5 GHz 6 dBi Directional Ant., 4-port, RP-TNC

AIR-ANT2524V4C-R= Cisco AIR-ANT2524V4C-R 2.4GHz 2dBi/5GHz 4dBi Ceiling Mount Omni Ant., 4-port,RP-TNC

AIR-ANT2544V4M-R= Cisco AIR-ANT2544V4M-R 2.4GHz 4dBi/5GHz 4dBi Multi Mount Omni Ant., 4-port,RP-TNC

Compare to Similar Items

Table 3 shows the comparison between two AP.

Models AIR-AP3802E-E-K9 AIR-AP3802P-E-K9

Permit Antenna Gains Up to 6 dBi Up to 13 dBi

- 2 Ethernet ports - 2 Ethernet ports

- 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) - 100/1000/2500/5000 Multigigabit Ethernet (RJ-45)
- CAT 5e cabling - CAT 5e cabling
Interfaces
- Higher-quality 10GBASE-T (CAT 6/6a) cabling - Higher-quality 10GBASE-T (CAT 6/6a) cabling
- 100/1000BASE-T autosensing (RJ-45 - AUX port) - 100/1000BASE-T autosensing (RJ-45 - AUX port)
- Management console port (RJ-45) - Management console port (RJ-45)

E (E regulatory domain): E (E regulatory domain):

- 2.412 to 2.472 GHz; 13 channels - 2.412 to 2.472 GHz; 13 channels
Regulatory Domain - 5.180 to 5.320 GHz; 8 channels - 5.180 to 5.320 GHz; 8 channels
- 5.500 to 5.700 GHz; 8 channels - 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz) (excludes 5.600 to 5.640 GHz)

Support & Resources

[PDF] Cisco Indoor Access Points Comparison Chart

Get more information

Do you have any question about the AIR-AP3802E-E-K9?

Contact us now via Live Chat or sales@router-switch.com.

Specification

AIR-AP3802E-E-K9 Specification

Description 802.11ac Wave 2 AP w/CleanAir, 4x4:3, Mod, External Antenna, mGig, E Regulatory Domain
 E (E regulatory domain):
- 2.412 to 2.472 GHz; 13 channels
Regulatory Domain - 5.180 to 5.320 GHz; 8 channels
- 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)

Cisco Unified Wireless Network Software Release 8.2.MR1 or later

Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for
Software and
Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series
supported wireless
Wireless Controllers, Cisco Virtual Wireless Controller
LAN controllers
Cisco IOS®XE Software Release 16.3 – Target Q3 CY2016
Cisco Catalyst 3850 Series and 3650 Series Switches

4x4 MIMO with three spatial streams

Maximal ratio combining (MRC)
802.11n and 802.11a/g beamforming
802.11n version 2.0
20- and 40-MHz channels
(and related)
PHY data rates up to 450 Mbps (40 MHz with 5 GHz).
capabilities
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Cyclic shift diversity (CSD) support

4x4 MIMO with three spatial streams

MRC
802.11ac beamforming
802.11ac Wave 1 20-, 40-, and 80-MHz channels
capabilities PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 DFS
CSD support

4x4 MU-MIMO with three spatial streams

MRC
802.11ac beamforming
802.11ac Wave 2 20-, 40-, 80, 160-MHz channels
capabilities PHY data rates up to 5.2 Gbps
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 DFS
CSD support

Flexible radio (either 2.4 GHz or 5 GHz)

2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
Integrated antenna 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°
Dedicated 5-GHz radio
5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth

3802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
External antenna 3802p Series access points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-
(sold separately) N=antenna
Cisco offers the industry's broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios

Available on the 3802e Series and 3802p Series access points only
Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point
Smart Antenna
Required when running the flexible radio as either a:
Connector
◦ Second 5-GHz serving radio
◦ Wireless Security Monitoring radio

◦ 2 Ethernet ports
◦ 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
◦ CAT 5e cabling
Interfaces
◦ Higher-quality 10GBASE-T (CAT 6/6a) cabling
◦ 100/1000BASE-T autosensing (RJ-45 - AUX port)
◦ Management console port (RJ-45)

Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions Access point (without mounting brackets): 3802I: 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm), 3802E: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm),
(W x L x H) 3802P: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm)

Weight 4.6 lb (2.09 kg)

802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE®)

Input power
802.3at power injector (AIR-PWRINJ6=)
requirements
50W power supply (AIR-PWR-50=)
 30W at the PSE with all features enabled except for the USB 2.0 port
Power draw
34W at the PSE with the USB 2.0 port enabled

Cisco Aironet 3800i

Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
Operating temperature: 32° to 104°F (0° to 40°C)
Operating humidity: 10% to 90% percent (noncondensing)
Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 3800e
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
Environmental
Operating temperature: -4° to 122°F (-20° to 50°C)
Operating humidity: 10% to 90% (noncondensing)
Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 3800p
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
Operating temperature: -4° to 122°F (-20° to 50°C)
Operating humidity: 10% to 90% (noncondensing)
Operating altitude test: 40˚C, 9843 ft.

1024 MB DRAM
System memory
256 MB flash

Warranty Limited lifetime hardware warranty

Want to Buy

Order Now Get a Quote

Why Router-switch.com

As a leading network hardware supplier, Router-switch.com focuses on original new ICT equipment of Cisco, Huawei, HPE,
Dell, Hikvision, Juniper, Fortinet, etc.

200+ 18,000+ $20,000,000 50%-98% 100%

Countries we Sold Customers Trusted Inventory Available Off Global List Price Safe Online Shopping

Contact Us

● Tel: +1-626-655-0998 (USA) +852-3050-1066 / +852-3174-6166

● Fax: +852-3050-1066 (Hong Kong)
● Email: sales@router-switch.com