Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 2 views

    TDS_SMARTBOND FLEX HYDRO with logo (3)

    Uploaded by

    trinidadmariellapatricia

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TDS_SMARTBOND FLEX HYDRO with logo (3)

    Uploaded by

    trinidadmariellapatricia
    2 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2 views2 pages

    TDS_SMARTBOND FLEX HYDRO with logo (3)

    Uploaded by

    trinidadmariellapatricia

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    TECHNICAL DATA SHEET

    SMARTBOND FLEX HYDRO


    Flexible Tile Adhesive for Underwater C2S2

    PRODUCT DESCRIPTION
    SMARTBOND FLEX HYDRO conforms to BS INSTRUCTION FOR USE
    EN12004 type C2S2 with excellent adhesion strength,
    and high flexibility for permanently bonding all types, SUBSTRATE / SURFACE PREPARATION
    sizes, and applications of ceramic tiles as well as fully All substrates must be sound and thoroughly cleaned
    vitrified or impervious tiles such as porcelain, mosaic before applying SMARTBOND FLEX HYDRO. New
    glass tiles, and natural stones. Suitable for internal and render/screed surfaces must be allowed to cure for at
    external use, especially for dry or wet areas, including least 7 days while new concrete must have cured for 6
    swimming pools. weeks. Laitance, oil, grease, mold release agents, or
    SMARTBOND FLEX HYDRO is a polymer-fortified curing compounds, and other contaminants must be
    cement-based that has been specially formulated to removed from the concrete surface using a wire brush,
    provide easy mixing, excellent workability, low dust, scabbler, or other means.
    and no slump or shrinkage while maintaining optimum
    tensile adhesion strength and flexibility. MIXING
    It is particularly suited for areas with some movement, Pour 5.75 – 6.25 liters of water into a clean container.
    deflection, and continuous water immersion, e.g., a Slowly add 25kg of SMARTBOND FLEX HYDRO and
    swimming pool. Being an excellent adhesion, and mix with a slow-speed mechanical mixer until a
    flexible tile adhesive, it can be used for heavy-duty homogenous and lump-free paste is obtained. Allow
    applications on a variety of substrates. the mix to stand for 5 minutes and re-stir before use.

    APPLICATION
    The tile adhesive is spread on the substrate to a
    CUSTOMER BENEFITS:
    uniform thickness. The correct notched trowel size to
    ● Excellent pull-out strength use will depend on the type and size of the tiles.
    ● High Flexibility
    ● Withstands continuous water immersion Lay the tiles onto the adhesive and ensure that a firm
    ● Vertical and horizontal application pressure is applied to achieve good contact with the
    ● Non-slip properties adhesive.
    ● Non-sag properties
    ● Resistant to structural movements For large format sizes of tiles (60cm x 90cm and up)
    ● Workable consistency back-buttering is recommended according to ANSI and
    ● Environmentally friendly TCNA guidelines to increase the bond strength of tile
    adhesive.
    AREAS OF APPLICATION:
    Only apply to areas that can be tiled in the adhesive’s
    ● Internal and external areas open wet time.
    ● Areas with certain expansion/vibration
    ● Wet and dry areas Careful checks have to be made to ensure that skinning
    ● Swimming pools does not occur on the surface of the adhesive before
    laying the tiles. If skinning has occurred, rework the
    adhesive before laying the tiles.
    TECHNICAL DATA SHEET
    SMARTBOND FLEX HYDRO
    Flexible Tile Adhesive for Underwater C2S2

    TECHNICAL DATA:
    Physical Properties
    Appearance Cement-based Powder
    Color Gray PRECAUTIONS
    HEALTH AND SAFETY
    SMARTBOND FLX HYDRO is cement-based and
    Mechanical Results Test Method alkaline. Gloves should be worn during application.
    Properties Care should be taken to avoid inhalation of dust and
    (EN 12004) contact with the eyes.
    Tensile adhesion SMARTBOND FLEX HYDRO is non-flammable.
    28 days dry ≥ 1.0MPa (EN 1348) Refer to the latest Safety Data Sheet (SDS) for
    Water immersion ≥ 1.0MPa (EN 1348) comprehensive safety information on the proper
    Flexibility handling of this product.
    7 days dry ≥ 5.0mm (EN 12002)
    WARRANTY AND DISCLAIMERS
    The information provided in this technical data sheet is based on our
    PACKAGING best knowledge and testing methods. Any product use outside of
    specifications or improper storage or installation voids any warranty.
    SMARTBOND FLEX HYDRO is available in 25 kg Users are encouraged to conduct their testing to assess product
    bags. suitability. Always consult the product's safety data sheet (SDS) for
    safety guidelines and follow recommended precautions. We reserve
    the right to update this data sheet without notice, and users should
    COVERAGE ensure they have the latest information.
    Recommended coverage:
    One 25 kg bag of SMARTBOND FLEX HYDRO mixed
    with 5.75 – 6.25 liters of water will cover an area of
    about 5 – 6 m2 at an applied thickness of 2 – 3mm. The
    coverage is also affected by the condition of the
    substrate.

    Note: The coverage rates provided above are for


    guidance purposes only. Actual usage may vary
    depending on the specific substrate conditions and
    application methods.

    STORAGE AND HANDLING


    SMARTBOND FLEX HYDRO has a shelf life of 12
    months if maintained in dry storage conditions in an
    unopened bag.

    You might also like