TABLE OF CONTENTS

Customer Service ................................................ 3 New Product ..................................................... 4-5 Presses ........................................................... 6-11 .50 BMG ........................................................ 12-13 Case Prep ..................................................... 14-21 Case Trim ...................................................... 22-23 Priming .......................................................... 24-25 Mechanical Scales ............................................ 26 Electronic Scales ............................................... 27 Powder Handling .......................................... 28-32 Shell Holders ..................................................... 33 Reference Chart ................................................ 34 Reloading Dies ............................................. 35-42 Special Order ..................................................... 43 Shotshell ....................................................... 44-45 Bullet Casting ............................................... 46-51 Reloading Extras ............................................... 52 RCBS.Load/Manuals ......................................... 53 Chronograph/Apparel/Trigger Pulls .................. 54 R.A.S.S. Bench .................................................. 55 The prices shown in this catalog are U.S. suggested retail only and are not necessarily the prevailing prices in your area. Export orders are subject to applicable import duties and/or sales tax, which are not reected in the suggested retail price. Prices and specications are subject to change without notice. Effective January 1, 2011.
Allan Jernigan in Botswana Allan Jernigan in New Zealand

A Message From RCBS General Manager

We are pleased you chose to review our new 2011 RCBS product catalog. If you have been one of our many customers over the years, I thank you for your continued trust and support. If you are a potential new customer we encourage you to try us out! I am certain you will discover what millions of faithful RCBS customers have over the past 67 years. That is, RCBS makes the highest quality products and provides the best customer service our industry has to offer. That is our commitment to you, our valued customer. This commitment to the highest level of quality and service is what has made us the number one reloading company in the industry and is at the core of RCBS legacy. As always, I want to remind all shooting and hunting enthusiasts that it is our collective responsibility to help preserve our heritage and way of life for our children and grandchildren. The best way to do this is to encourage and mentor the youth of our nation to become involved in any type of shooting and hunting activity. Next time you head to the shooting range or go hunting, be sure to take your son, daughter or perhaps the child of a non-hunting friend, and introduce them to an entirely new and intriguing adventure. Doing so will help preserve the shooting sports for many generations to come. Again, I want to thank all of our loyal customers for your continued support. We are grateful for your business and it is my personal guarantee that RCBS will remain 100% committed to earning your continued trust. Allan Jernigan General Manager, RCBS Operation

CUSTOMER SERVICE
Do you have any questions about how to use or operate an RCBS product? Looking for information about reloading? Need a replacement part for an RCBS product? Dont hesitate to get in touch with the RCBS Technical Service Department. We are dedicated to giving the best service in the reloading industry. Our catalog is located on the web. Please contact us. Phone: 1-800-533-5000 Fax: 530-533-1647 Email: rcbs.tech@atk.com www.rcbs.com RCBS 605 Oro Dam Blvd. East Oroville, CA 95965

When requesting replacement parts, please provide the name of the product the replacement part is for, the part number (if known) and name of the replacement part. Replacement parts are shipped within 3-5 business days, depending on product availability, via rst class mail (large items by UPS Ground Service). Please be sure to provide your name, address and phone number.

RCBS eCommerce
RCBS offers you the option of purchasing directly from us online through www.RCBS.com. Visit us anytime to view or shop our more than 3000 RCBS product offerings. Prices are Suggested Retail and may not reect the prevailing prices in your area. NOTE: Website does not reect current stocking level.

90250 - Trimmer Carbide Cutter Head

Prototypes pictured. Actual units will vary.

Prototype pictured. Actual units will vary.

Prototype pictured. Actual units will vary. 90251 - 3-Way Carbide Cutter Head

90384 - TM Carbide Chamfer Tool

AR Series Dies
The new RCBS AR Series is a must for the progressive reloader. It features a Small Base sizing die and a new Taper Crimp seating die. This combination makes reloading easier for AR-style or semiauto shooters. The Small Base sizer guarantees that the cartridge will rechamber. The Taper Crimp Seater is more forgiving when various case lengths are loaded at the same time. Case neck crimp bulges and buckled shoulders are virtually eliminated when Taper crimping is used with cannelured bullets.

Bullet Feed DiePistol

Crank out ammo again in no time. The new Pistol Bullet Feed Die allows the progressive pistol loader to leave the feed die set up on the removable die plate for quick caliber changeovers. The popular RCBS Bullet Feeder shortens reloading sessions while increasing load rates by approximately 50%. Rather than reinstalling on die plates and adjusting Bullet Fingers and Guides, simply install another Bullet Feed Die to save more time during caliber changeovers. Includes Feed Die body, one set of Bullet Fingers and a retaining clip. 82351 Bullet Feed DiePistol $30.95

Pistol Powder ExpandersPro 2000

Progressive pistol cartridge reloaders are starting to run out of stations on their press. If you recently added the Pistol Bullet Feeder to your process, you either gave up your Powder Check or Lock Out station or combined bullet seating and crimping into one operation. Using the new Expanders in your Case Activated Uniow Powder Measure allows you to move Expansion and Powder drops to station two on your press. 88885 88886 88887 88888 88889 88890 88891 88892 Pistol Powder ExpandersPro 2000 .38 Pistol Powder ExpandersPro 2000 9mm Pistol Powder ExpandersPro 2000 .40 Pistol Powder ExpandersPro 2000 .44 Pistol Powder ExpandersPro 2000 .45 ACP Pistol Powder ExpandersPro 2000 .45 Colt Pistol Powder ExpandersPro 2000 .475 Pistol Powder ExpandersPro 2000 .500 $12.95 $12.95 $12.95 $12.95 $12.95 $12.95 $12.95 $12.95

Carbide Replacement Tools

Replacement carbide tipped cutters for your Case Trimmer, 3-Way Cutter and Trim Mate Chamfer or Debur tool. These carbide tipped tools cut clean and stay sharp for a lifetime of use. 90250 Trimmer Carbide Cutter Head 90251 3-way Carbide Cutter Head 90384 TM Carbide Chamfer Tool 90385 TM Carbide Debur Tool $44.95 $44.95 $44.95 $44.95

10307 SB T/C Die Set .204 Ruger 10362 T/C Seater .204 Ruger 11107 SB T/C Die Set .223 Rem./5.56mmx45 11162 T/C Seater .223 Rem./5.56mmx45 28907 SB T/C Die Set 6mmx45 28962 T/C Seater 6mmx45 11407 SB T/C Die Set .243 Win. 11462 T/C Seater .243 Win. 16407 SB T/C Die Set .264 LBC-AR 16462 T/C Seater .264 LBC-AR 32907 SB T/C Die Set 6.5 Creedmoor 32962 T/C Seater 6.5 Creedmoor 12807 SB T/C Die Set .260 Rem. 12862 T/C Seater .260 Rem. 13307 SB T/C Die Set 6.8mmx43 REM SPC 13362 T/C Seater 6.8mmx43 REM SPC 35007 SB T/C Die Set 7.62mmx39 35062 T/C Seater 7.62mmx39 15507 SB T/C Die Set .308 Win. 15562 T/C Seater .308 Win. 25307 SB T/C Die Set .30 Rem. AR 25362 T/C Seater .30 Rem. AR 14807 S B T/C Die Set .30-06 Spring. 14862 T/C Seater .30-06 Spring. 17307 S B T/C Die Set .338 Federal 17362 T/C Seater .338 Federal

$52.95 $42.95 $52.95 $42.95 $52.95 $42.95 $52.95 $42.95 $52.95 $42.95 $52.95 $42.95 $52.95 $42.95 $52.95 $42.95 $52.95 $42.95 $52.95 $42.95 $52.95 $42.95 $52.95 $42.95 $52.95 $42.95

Military Crimp Removers

Redesigned to speed up case processing and reduce the amount of primer pocket being cut away. 90386 TM Military Crimp RemoverSmall 90387 TM Military Crimp RemoverLarge $20.95 $20.95

Powder Trickler2
Todays trend is to use electronic scales to measure powder charges. Many of these scales have scale pans that are positioned out of reach of existing powder tricklers. The Powder Trickler2 solves this problem by adding a height adjustable, non-skid base and powder tube extension. The Powder Trickler2 Upgrade Kit is designed to convert your existing 09094 Powder Trickler to have all of the added functions above. 09089 Powder Trickler2 09093 Powder Trickler2 Upgrade Kit $22.95 $6.95

Primer Pocket Swager Tool2 (not pictured) Accessory Handle2

Larger ergonomical handle for use with many RCBS accessories. 09332 Accessory Handle2 $7.95 The Primer Pocket Swager has been redesigned to t a larger group of cases. The swaging rods are made from stronger high tensile steel, more than doubling the strength versus the original design. NOTE: Not for use on progressive presses 09481 Primer Pocket Swager Tool2 $39.95

.50R Pilot/50-caliber Cutter (not pictured)

Pilots and cutter for use on Rotary or Trim Pro case trimmers. These accessories are a must if you are trimming cases like the .500 S&W or .50-90 Government. 09400 .50R Pilot 09364 50-caliber Trimmer Cutter $4.95 $19.95

Pro 2000 Auto Index Press & Upgrade Kit

Take your reloading to the next level with the RCBS Pro 2000 Auto Index Press. Five station automatic indexing for maximum production in shorter sessions with a load rate of approximately 600 rounds per hour. APS priming for the safest, most convenient priming system on the market. Case activated powder measure stops accidental spillage while the case retention system provides quick access to cases. Quick change die plate for fast caliber change over. Ability to change primer sizes in less than a minute. Uniow Powder Measure, APS Strip Loading Tool, 32 empty APS Strips, bullet tray, empty brass bin and loaded ammo bin included. The Upgrade Kit allows you to convert your manual indexing Pro 2000 to automatic indexing operation. Accessory Base Plate not included. See page 33 for list of Shell Plates. 88882 Auto Index Press 88883 Auto Index Upgrade Kit $753.95 $136.95

Pro 2000 Progressive Press

The Pro 2000 is an easy to use ve station manual indexing progressive press. Simply insert a cartridge case and bullet, cycle the handle and index the shell plate. The ve station design allows for the use of a Powder Checker or Lock-Out die or you can seat bullets and crimp cases in separate operations. The APS priming system means that you never have to touch your primers. Switching from large to small primer seating takes seconds. The quick change die plate allows you to leave dies set for quick caliber changeover and will accept any standard 7/814 threaded dies. The Uniow Powder Measure coupled with our Case Activated linkage system means powder charges will be dispensed accurately and only if a cartridge case is present! No more accidental powder spillage mishaps! The large working window and Universal Case Retention system allows easy removal and insertion of cases at any station. Compound leverage makes resizing rie and pistol cases effortless. The rugged cast iron frame will provide a lifetime of service and the RCBS warranty guarantees it! Accessory Base Plate not included. See page 33 for list of Shell Plates. 88875 88878 88877 88876 88879 86767 09627 Pro 2000 Progressive Press Pro 2000 Star Wheel Pro 2000/Piggyback 3 & 4 Die Plate Tube Priming Conversion Kit Low Primer Detector Dust Cover Powr Punch Decap Rod $673.95 $8.95 $22.95 $137.95 $41.95 $19.95 $7.95

Piggyback 3 & 4
If you own a RCBS Rock Chucker, Reloader Special 3, or Reloader Special5, (each sold separately), you know theyre some of the nest single-stage presses ever built. The Piggyback 3 moves you from single-stage reloading to ve-station manual indexing, progressive reloading in one step, and moves your output from 50 rounds per hour to more than 400. If you own the Rock Chucker Supreme, the Piggyback4 is the unit to convert the press to progressive operation. Optional extra Star Wheel can remain permanently attached to the Shell Plate for quicker caliber changeover. Piggyback 3 & 4 includes Strip Loading Tool with 32 empty strips. Accessory Base Plate not included. 87810 87811 88878 86767 09627 Piggyback 3 Piggyback 4 Pro2000/Piggyback 3, 4 Star Wheel Dust Cover Powr Punch Decap Rod $508.95 $508.95 $8.95 $19.95 $7.95

Lock-Out Die
The Lock-Out Die detects a no powder or a double charge condition in the progressive reloading process. It locks up, halting the travel of the ram, alerting the reloader to the problem so the cause can be corrected. Will not let you continue without removing the improperly charged cartridge. For use with straight-wall pistol calibers, 9mm and larger, and only on progressive reloading presses. 87540 Lock-Out Die $58.95

Die Lock-Ring Wrench

No more bashed knuckles or fumbling with adjustable wrenches. The RCBS Die Lock-Ring Wrench simply slips onto the die lock ring for quick and easy adjustment. A pivoting handle allows leverage from any angle and the heat-treated steel stands up to all the brute force you can muster. 09634 Die Lock-Ring Wrench (1-3/16) $7.95

Pro 2000 Deluxe Reloading Kit

The Piggyback 3 & 4 is an accessory item for your existing press. Requires Uniow Powder Measure (not included). See page 33 for list of Shell Plates.

Pro 2000/Piggyback 3 & 4 Die Plate

Make caliber changes quickly and easily. Leave the reloading dies set up. Eliminates the need to install and adjust dies for each reloading session. 88877 Pro 2000/Piggyback 3 & 4 Die Plate $22.95

Contents: Pro 2000 Progressive Press with APS Priming System, Case Activated Powder Dispensing System with Uniow Powder Measure. Trim Pro Manual Case Trimmer Kit includes Trim Pro Shell Holders 2, 3, 4, 10 and Trim Pro Pilots 22, 24, 25, 27, 28, 30, 35, 44, 45. Speer Reloading Manual, Case Lube Pad, 2-ounce bottle of Case Lube2, Accessory Handle with Small and Medium Case Neck Brushes. Deburring Tool for .17 to 45-calibers, Fold-up Hex Key Wrench set, Stainless Steel Dial Caliper, RangeMaster 750 Electronic Scale, APS Strip Loader and 32 empty APS strips. Accessory Base Plate not included. 88880 Pro 2000 Deluxe Reloading Kit $1212.95

Powder Checker
A simple, effective way to visually check powder charges when you use a progressive press. The Powder Checker sits between the powder charging and bullet seating stations. Using a probe rod, it lets you visually conrm that the case is properly charged with powder before bullet seating. In addition to spotting a no-charge condition, the Powder Checker shows low and high charges too. Black oxide nish provides contrast for better visibility. For use with rie and pistol cases. 87590 Powder Checker $36.95

Powr Punch Decap Rod

For use with pistol calibers in Progressive Presses. The decap rod has a spring loaded decapping pin to ensure the spent primer is always fully ejected from the primer pocket. Eliminates indexing problems with progressive presses caused by the spent primer jamming the shell plate. Works in all RCBS pistol sizer dies. RCBS pistol sizing dies equipped with the Powr Punch Decap Rod Assembly will work in any brand progressive press that uses standard 7/8-14 threaded dies. 09627 Powr Punch Decap Rod $7.95

Turret Press
Simple operationno complex or automated processes. You have complete control over every reloading step. May be operated in progressive or single-stage mode. In the progressive mode, output can be increased from 50 to 200 rounds per hour. Or, if preferred, the press can be used as a singlestage press and load cases in the batch mode. Rugged, cast iron frame, toggle block and turret head. Heavy-duty construction to minimize springing. Detent on Turret Head for positive alignment. Standard 7/8-14 threads for most popular reloading dies and accessories. Six-Station Turret Head allows many combinations in the mounting sequence of dies and powder measure permits two or more calibers to be set up at the same time. Turret Head held in place by one bolt for quick, easy changeovers. Turret Pin Assembly (provided for turret head removal and installation) and Ball Handle Assembly may be positioned for right or left-hand use. Standard Shell Holders slip into press ram and are securely held in place by a clip spring. Primer Plugs and Sleeves are supplied for seating large and small primers. Primers are seated away from stacked primers. Safety tube included. The Primer Catcher eliminates spent primers on oorsnaps off for easy emptying. Baked epoxy nish for quick, easy cleaning, chip and fade resistant. NOTE: We highly recommend the optional Uniow Powder Measure with Case Activated Linkage Kit for use on the Turret Press (sold separately). See page 31.

Turret Deluxe Reloading Kit

With this kit youll only need to add a Reloading Die Set and Shell Holder for the caliber(s) you intend to reload. Information on each individual kit component is described elsewhere in this catalog see the index. Buy the kit and save about 10% of the price of each item separately. 88906 Turret Deluxe Reloading Kit Contents: Turret Press Uniow Powder Measure Model 5-0-2 Reloading Scale Speer Reloading Manual Case Lube Kit $559.95 Deburring Tool Case Loading Block Fold-up Hex Key Wrench Set Primer Tray2 Powder Funnel

AmmoMaster .50 BMG Pack

The AmmoMaster .50 BMG Pack makes reloading for the .50 Browning Machine Gun cartridge a simple task. Manufactured to accept RCBS 1-12 .50 BMG dies, along with the massive 1 solid steel ram, provides more than enough strength to handle the .50 and will provide a lifetime of service. This kit includes the press, Full-Length Sizer, Seater Die, Shell Holder, Ram Priming Unit and Trim Die in one convenient box. The only extras required are cartridge components and the rie to re them! 88700 AmmoMaster .50 BMG Pack 88715 Standard Shell Holder Adaptor $765.95 $27.95

AmmoMaster2 Single Stage Press

The AmmoMaster2 single stage press has been improved with the installation of the longer support columns and larger toggle block found on our AmmoMaster .50 BMG press. While still set up to use standard 7/8-14 thread dies and standard shell holders to load most any pistol or rie caliber, the addition of the .50 BMG 1-1/2 Die Kit (88705) will allow you to load from .25 ACP to .50 BMG. For original AmmoMaster owners wishing to load .50 BMG, two kits are necessary. The .50 BMG 1-12 Press Conversion Kit and the .50 BMG 1-12 Die Kit. The Press Conversion kits contains the larger toggle block and support columns and the Die Kit contains a Full Length Size Die, Roll Crimp Seat Die, Trim Die, .50 BMG Shell Holder and .50 BMG Ram Priming Unit. 88703 AmmoMaster2 Single Stage Press 88705 .50 BMG 1-12 Die Kit 88709 .50 BMG 1-12 Press Conversion Kit (for 88701 AmmoMaster) 88772 .50 BMG Ram Priming Unit 88746 .50 BMG Shell Holder 30065 .50 BMG Trim Die 86767 Dust Cover $351.95 $469.95 $165.95 $52.95 $25.95 $172.95 $19.95

AmmoMaster/Piggyback II Die Plate

Reduce the time and effort to remove, replace and adjust dies when making caliber changes on your AmmoMaster Auto or Piggyback II conversion unit. This replacement top plate allows you to have additional calibers set up and ready. It is complete with ve station top plate, clutch bearing with bushing, cam wire clip with lock nut and setscrew. 88799 AmmoMaster/Piggyback II Die Plate $44.95

88901 Turret Press

$284.95

Reloading Accessory Kit Turret Head

Makes changing calibers quick and simple. Leave the dies set up in the Turret Head and change the Headone bolt does the trick! Six stations with standard 7/8-14 threads. 88902 Turret Head $57.95 This package makes reloading even easier with some nice tools. The Reloading Accessory Kit includes: Powder Measure/ Piggyback Stand, Powder Trickler, Primer Pocket Brush Combo, Case Loading Block, Stainless Steel Dial Caliper, small and medium size Case Neck Brushes. 98925 Reloading Accessory Kit $149.95

Partner Press Reloading Kit

Our Partner Press anchors this excellent starter kit. Big on performance, small on price, the Partner is the ideal entry-level press. Here its coupled with some of the nest basic reloading tools youll nd anywhere. The RCBS Partner Press Reloading Kit includes: Partner Press, RC-130 Scale, Case Loading Block, Case Lube Pad, Case Lube2, Case Neck Brushes, Primer Tray2, Deburring Tool, Powder Funnel and Speer Reloading Manual. Accessory Base Plate not included. 87466 Partner Press Reloading Kit $236.95

Rock Chucker Supreme Press

The Rock Chucker Supreme press has been lengthened to allow easy loading of todays longer cartridge designs and renamed the Rock Chucker Supreme. With the same easy operation, ambidextrous handle, outstanding strength and versatility, the Rock Chucker Supreme is ideal for the beginner and pro alike. It can also be upgraded to a progressive loader with the addition of a Piggyback4. 09356 09552 09553 86881 Rock Chucker Supreme Press Primer Plug, Sleeve & Spring (large) Primer Plug, Sleeve & Spring (small) Dust Cover $196.95 $4.95 $4.95 $11.95

Reloading Starter Kit

This is one of the truly remarkable values in reloading. It has everything you need to get started reloading rie and pistol cartridges (except dies and shell holders), and is easily upgraded to progressive operation with the optional Piggyback3. For upscale reloading at an affordable price, this kit cant be beat. The RCBS Reloading Starter Kit includes: Reloader Special5 Press, 5-0-5 Scale, Case Loading Block, Case Lube Kit, Primer Tray2, Powder Funnel, Deburring Tool and Speer Reloading Manual. Accessory Base Plate not included. 09045 Reloading Starter Kit $364.95

Bullet FeederRie Kit (Progressive Press)

Based on the popularity of the Pistol Bullet Feeder Kit, RCBS introduces two rie versionsone for 22-caliber and one for 30-caliber. Designed to t on most 7/8-14 threaded progressive presses (adapters may be required for other brands), these new Rie Bullet Feeders each feature a four country universal 110-240 VAC operated collator unit that orients the bullets to drop into the feed mechanism/seat die. The hopper holds approximately 250 22-caliber bullets and 100-125 30-caliber 180-grain bullets. Each kit increases load rates by 50%. NOTE: Not for use with lead bullets. Use jacketed or FMJ bullets only. Features & Benets Available for either .22 or .30 caliber Increases load rate by 50% Large hopper for non-stop reloading and max output/efciency Bullets are oriented to drop directly into feed mechanism/seat die Plug adapters for U.S., U.K., AUS and E.U. included with CE approved power supply Adjustable collator height RCBS Two year warranty 82352 Bullet Feeder22-caliber Rie Kit 82354 Bullet Feeder30-caliber Rie Kit $613.95 $613.95

Partner Press
Just starting out? The Partner Press is easy to use and incredibly durable. Our least expensive press offers big performance in a compact package. Its also perfect as a second press for different operations or a portable press for use at the range. Accessory Base Plate not included. 87460 Partner Press 86881 Dust Cover $93.95 $11.95

Reloader Special5 Press Rock Chucker Supreme Auto Prime

The RCBS Rock Chucker Supreme Auto priming unit will convert your one-at-a-time priming to a tube fed priming system and also eliminate the handling of primers. The RC Supreme Auto Prime body attaches to the same place as the standard priming arm. Attach the proper primer cup and seat plug to the priming arm slide, insert the correct primer tube and safety shield, ll the primer tube and you are ready to prime. The straight push-pull primer arm slide reduces the chances of primers falling out of the primer seat plug. Features & Benets Tube fed priming system Safety shield Speeds up single stage reloading process Eliminates handling of primers 100 primer capacity Push bar operation Large and small primer pick up, feed tubes and primer seat plugs included RCBS Limited Lifetime Warranty 09358 Rock Chucker Supreme Auto Prime $50.95 The latest in our popular line of Reloader Special presses. Featuring a more comfortable ball handle and a primer arm that lets you prime cases at the same time you resize. 09285 Reloader Special5 Press 86881 Dust Cover $160.95 $11.95

Bullet FeederPistol Kit (Progressive Press)

Designed to t on most 7/8-14 threaded progressive presses the RCBS Pistol Bullet Feeder Kit features a four country universal 110-240 VAC operated collator unit that orients the bullets to drop into the feed mechanism. The hopper holds approximately 200 bullets. The kit contains adapters to load 9mm/.38 Special/.357 Mag., 10mm/.40 and .45 ACP jacketed/FMJ pistol bullets. Load rate increased by 50%. Patent pending. NOTE: Not for use with lead bullets. Use jacketed or FMJ bullets only. Features & Benets Hopper holds approximately 200 bullets Bullets are oriented to drop directly into feed mechanism Adaptors allow loading of 9mm/.38 Special/.357 Mag., 10mm/.40 & .45 ACP jacketed/FMJ pistol bullets RCBS Two year warranty 82350 Bullet FeederPistol Kit $526.95 Plug adapters for U.S., U.K., AUS., and E.U. included with CE approved power supply Increase load rate by 50% Adjustable collator height

Rock Chucker Supreme Master Reloading Kit

Weve taken the new benchmark of single stage presses and surrounded it with the equipment you need (except dies and shell holders) to start loading like a pro. A simple solution for the beginner and pro alike, it is easily upgraded to progressive operation with the optional Piggyback4. The Rock Chucker Supreme Master Reloading Kit includes: Rock Chucker Supreme Press, 5-0-5 Scale, Uniow Powder Measure, Speer Reloading Manual, Hand Priming Tool, Hex Key Set, Case Loading Block, Case Lube Kit, Powder Funnel and Deburring Tool. 09357 Rock Chucker Supreme Master Kit $458.95

AmmoMaster .50 BMG Pack

The AmmoMaster .50 BMG Pack makes reloading for the .50 Browning Machine Gun cartridge a simple task. Manufactured to accept RCBS 1-12 .50 BMG dies, along with the massive 1 solid steel ram, provides more than enough strength to handle the .50 and will provide a lifetime of service. This kit includes the press, Full-Length Sizer, Seater Die, Shell Holder, Ram Priming Unit and Trim Die in one convenient box. The only extras required are cartridge components and the rie to re them! 88700 AmmoMaster .50 BMG Pack 88715 Standard Shell Holder Adaptor $765.95 $27.95

1-1/212 Bullet Puller

The 1-1/212 Bullet Puller is designed for use on the AmmoMaster2 or AmmoMaster .50 BMG pack press. Using the .416 or .50 BMG bullet puller collets (sold separately) allows the quick removal of bullets from loaded ammunition so that you can salvage your components. 9446 9447 9448 1-1/212 Bullet Puller .416 Barrett Collet .50 BMG Collet $160.95 $63.95 $63.95

.50 BMG Military Crimp Remover

Designed to be used with the RCBS Accessory Handle or on the RCBS Trim Mate Case Prep Center, the .50 BMG Military Crimp Remover cuts away the primer pocket crimp found on military .50 BMG brass, allowing the handloader to easily reprime their cases. 9562 .50 BMG Military Crimp Remover $31.95

.50 BMG Carbide Primer Pocket Uniformer High Capacity Case Trimmer Kit
Trim all of your big bore cases in no time with the new RCBS High Capacity Case Trimmer. Designed to handle the most beefy cases such as the .50 BMG and .416 Barrettplus many other favorites RCBS answers the call of the big bore shooter. Includes .408, .416 and .50R caliber pilots. 90352 High Capacity Case Trimmer 90353 Collet #1 90354 Collet #2 $153.95 $21.95 $21.95 Designed to be used with the RCBS Accessory Handle or on the RCBS Trim Mate Case Prep Center, the .50 BMG Carbide Primer Pocket Uniformer utilizes a carbide cutter to square the bottom of the primer pocket and uniform the primer pocket depth. This allows the handloader to easily seat primers to a consistent depth for reliable ignition.

.50 BMG Priming System

The RCBS .50 BMG Priming system provides a dedicated bench mounted system that allows handloaders to easily reprime their cases. The primer tube holds (20) .50 BMG primers and features a Safety Shield Tube. Primer pick-up tube, at and oval primer seat plugs included. 9560 .50 BMG Priming System $138.95

9561

.50 BMG Carbide Primer Pocket Uniformer

$54.95

COLLET FIT CHART

.50 BMG/.416 Barrett .40-60 Winchester .408 CheyTac .416 Barrett .45-60 Winchester 450x400x3 (400 Jeffery) .50-95 Winchester .505 Gibbs .50 BMG HC #1 .50-70 Govt .50-90-21/2 Sharps Straight .56-50 Spencer .470 NE 31/4 .500 Jeffery .500 NE 3 HC #2 .338 Lapua .40-65 Shiloh Sharps .45-70 Govt .45-90-2.4 Sharps Straight .45-100-2.6 Sharps Straight .45-110-27/8 Sharps Straight .45-120-31/4 Sharps Straight .404 Jeffery .450 Rigby Rimless

Dial indicator accurately displays various measurements to .001 for the discriminating handloader who demands a higher level of ammunition performance

Has the ability to measure case neck thickness

Fully-adjustable V Blocks to securely position the case for accurate measure

Incorporates case head separation detection

Compact base for convenience yet steady enough to support the tasks required

Dial Caliper/Case Length Gauge

Fiberglass reinforced super polymid construction. Range of 0-6/0-150mm. Direct .001 readings. Graduations .001 increments with 0.100 per single revolution of dial; 1.0mm bar scale. Dial adjustable to zero. Four-way measurements: outside, inside, depth and step. Comfortable friction thumb roller opens and closes caliper. Large, easy to read black numbers and markings on white background. Fitted clear plastic storage case. Imported. 87301 Dial Caliper/Case Length Gauge $59.95

Case Master Gauging Tool

A quick, convenient way to determine several important case and cartridge dimensions. The Case Master gauging tool measures case neck concentricity, uniformity and thickness, as well as case length and bullet run-out. All are important to accuracy and safety. Detects case head separation before symptoms are apparent on the outside of case. Much quicker than a dial caliper and makes a tedious job simple and less tiring. 87310 Case Master Gauging Tool $134.95

Precision Mic
A few twists of the Precision Mic and youll know your chamber headspace and bullet seating depth to 0.001 of an inch. The Precision Mic measures from the datum point on the case shoulder to the base, giving you spot-on SAAMI tolerance readings. An indispensable tool for safe, accurate loads that extend the life of your rie brass. Precision Mics: 88299 .204 Ruger 88303 .222 Rem 88304 .223 Rem 88302 .22-250 Rem 88301 .220 Swift 88300 .223 WSSM 88305 .243 Win 88309 .243 WSSM 88306 6mm Rem 88307 .25-06 88308 .257 Roberts 88310 .25 WSSM 88314 6.5mm x 55 88316 .270 Win 88315 .270 WSM 88317 .280 Rem 88322 7mm-08 Rem 88323 88319 88321 88318 88340 88329 88324 88327 88325 88326 88328 88330 88331 88333 88337 88339 7mm x57 Mau 7mm Rem Mag 7mm RSAUM 7mm WSM 7mm RUM .308 Win .30-06 Spring .300 Win Mag .300 WSM .300 RSAUM .300 RUM .325 WSM .338 Win Mag .338 RUM .375 H&H Mag .375 RUM $64.95

Vernier Ball Micrometer

Economical Vernier Ball Micrometer for measuring case neck thicknesses. All metal body and thimble with matte nish. Range: 0-1, Accuracy within .0001. Ratchet stop on thimble assures uniform application of pressure. Thimble lock keeps thimble from turning when measuring a constant. Adjustment wrench included. Fitted plastic storage case. Imported. 87324 Vernier Ball Micrometer $65.95

Stainless Steel Dial Caliper

Hardened stainless steel construction. Matte, non-glare nish. Range 0-6. 0.100 direct reading per revolution. 0.001 graduations. Accurate to +/- 0.001. Four-way measurement capability: inside, outside, depth and step. Shockproof movement for accurate measurements. Clear glass lens protects dial from dust and scratches. Slide may be locked in any position with thumb lock. Dial easily zeroed. Lock screw holds dial in position for precise measurements. Thumb wheel makes for easy opening and closing of the caliper. Fitted hard plastic storage case. Imported. 87305 Stainless Steel Dial Caliper $53.95

Mechanical Digital Micrometer

Quick, easy to read. Metal body with satin chrome thimble. White numbers on black background. Outside micrometer has 0-1 range. Mechanical counter reads to .001. Resolution: .0001. Accuracy within .0001. Ratchet stop on thimble applies even pressure for measuring. Thimble lock stops thimble from turning when measuring like objects. Adjustment wrench included. Fitted wooden storage case. Imported. 87322 Mechanical Digital Micrometer $66.95

Electronic Digital Caliper

Instant reading. Very easy to use. Hardened stainless steel body for prolonged tool life. Switches from inches to millimeters with the touch of a button. Range of 0-6/0-150mm. Accuracy +/- 0.001/ 0.02mm. Resolution: 0.0005/0.01mm. Large, easy to read numbers, reduces errorno guessing. Adjusts to zero at any position. Measures internal, external, depth and step dimensions. Jaw depth measures 1-1/2 outside, 5/8 inside. Lock holds slide in position for measuring constants. Battery included. Low battery indicator. Fitted plastic storage case. Imported. 87323 Electronic Digital Caliper $82.95

Electronic Digital Micrometer

Instant reading. Top of the line. Enameled metal body with matte nished, non-glare thimble. Outside micrometer has 0-1/0-25mm range. Counter reads to .00005. Resolution .00005/ 0.001mm. Accuracy .0001/.0025mm. Large, easy to read numbers for error reduction with instant inch/millimeter conversion. Zero adjust at any position. Thimble lock for measuring like objects. Battery included. Auto off after ve minutes for longer battery life. Fitted storage case. Imported. 87320 Electronic Digital Micrometer $156.95

Vernier Micrometer
Economical version without the bells and whistles. All metal body and thimble with silver matte nish. Crisp black numbers and markings for easy reading. Range: 0-1. Reads to .0001 of an inch. Accuracy within .0001. Ratchet stop on thimble assures uniform application of pressure when measuring. Thimble lock keeps thimble from turning when measuring a constant. Adjustment wrench included. Fitted plastic storage case. Imported. 87321 Vernier Micrometer $39.95

Case Lube Kit

Properly clean and lube cases for resizing the simple way with this complete kit. Includes Case Lube Pad, 2-ounce bottle of Case Lube2, and Accessory Handle with two interchangeable Case Neck Brushes for .22 through .30 calibers. 09335 Case Lube Kit $24.95

Case Loading Block

A solid, steady platform that holds 40 cases at a time to streamline powder charging and inspection. Stepped holes minimize case tipping to reduce powder spillage. For most rie and pistol cases. Approximately 4-7/8 x 7-1/4. 09453 Case Loading Block $7.95

Die or Press Maintenance Kits

Keep your reloading gear in pristine condition with our Die or Press Maintenance Kits. Outtted with the necessary chemicals and brushes to clean reloading dies and presses, these kits are perfect for removing dirt, oil and other debris from every nook and cranny. They also come equipped with special chemicals and oils designed for safe, long-term storage of your reloading equipment. 99970 Die Maintenance Kit 99971 Press Maintenance Kit $29.95 $23.95

Lube Dies
Decap and lube cases in one step with our exclusive Lube Die. Designed for progressive presses like the Pro 2000, Piggyback3 & 4, Piggyback II, AmmoMaster, and Auto 4x4, but works just ne in single-stage presses. Four sizes cover 45 popular calibers. Its faster and cleaner than a lube pad; easy to rell with lubricant (RCBS Case Lube2); standard 7/8-14 thread. See Reference Chart on page 34. 87551 87552 87553 87554 87575 Lube Die # 1 Lube Die # 2 Lube Die # 3 Lube Die # 4 Decap Unit $42.95 $42.95 $42.95 $42.95 $8.95

Case Lube2

(Pictured above with Case Lube Kit)

An excellent lubricant thats water soluble and convenient to wipe off easily with no sticky residue. Non-toxic. Use Case Lube2 with RCBS Lube Dies or Case Lube Pad. 09311 Case Lube2 (2 oz. bottle) 09313 Case Lube2 (gallon/bulk) $4.95 $155.95

Universal Case Loading Block

The RCBS Universal Case Loading Block has been designed to t most any standard rie or pistol case including the WSM, WSSM and Ultra Mag family of cartridges. The two-sided design offers three different case ts per side and will hold 50 cases. Short pistol cases t in the raised upper portion of the block for easy access. The stepped holes accommodate large pistol and rie cases. 09452 Universal Case Loading Block $10.95

Military/Berdan Decapping Tool

For efcient removal of Berdan primers, nothing beats our Berdan Decapping Tool. Decap 8mm Rimless, 6.5mm MannlicherSchoenauer, 11.7mm Rimmed and more. All functional parts are made of top-grade, heat-treated steel alloy for toughness. Comes with case holder and hex wrench. 09525 Berdan Decapping Tool 09528 Berdan Decapping Pin $69.95 $5.95

Case Lube Pad

(Pictured above with Case Lube Kit)

The best way to lubricate cases for resizing or forming. Coat the pad with Case Lube2, then roll the case lightly across it. Exactly the right amount of lubricant is transferred to the case. Pad is removable from sealable storage case for easy cleaning. 09307 Case Lube Pad $11.95

Case Slick Spray Lube Case Neck Brushes

(Pictured above with Case Lube Kit)

Clean dirt and powder residue from inside necks and simultaneously lubricate for expansion with our case neck brushes. The no-roll handle design accepts all three nylon bristle brushes: small brush for .22 to .25 caliber, medium brush for .270 to .30 caliber, large brush for .35 to .45 caliber. 09327 Case Neck Brush-Small 09328 Case Neck Brush-Medium 09329 Case Neck Brush-Large $3.95 $3.95 $3.95

Case Slick is an exclusive formulation that provides exceptional lubricity for resizing or forming of metallic rie and pistol cases. Testing reveals, Case Slick reduces the force needed to resize .308 Winchester cases by 35 to 70 percent when compared to other lubes. Reducing the resizing force makes the process easier on you and your brass. Case Slick is formulated to ow evenly over the surface of the brass. Uniform coverage makes resizing a breeze and eliminates the possibility of denting the shoulder of the case. 09315 Case Slick Spray Lube Shipped UPS Ground only. No International sales. $10.95

Decap Die
Use our Decapping dies to quickly remove primers from cases prior to cleaning. The Decap Die .22-.25 will handle most cases. The H.D. die is designed for use on Military primer crimped cases larger than 27-caliber. 87580 87585 87575 87586 Decap Die .22-25-caliber H.D. Decap Die .27-45-caliber Decap Unit .22-25-caliber H.D. Decap Unit $20.95 $21.95 $8.95 $9.95

Primer Pocket Brush Combo

A build-up of residue in primer pockets can cause misres. A couple of twists with our Primer Pocket Brush and residue is easily cleaned out. Brushes have stainless bristles and interchangeable mounts for large and small primer pockets. Comes with a no-roll accessory handle. 09574 09578 09577 09330 Primer Pocket Brush Combo Small Brush only Large Brush only Accessory Handle $18.95 $8.95 $8.95 $5.95

Powr Pull Kit

Get yourself out a jam with the new RCBS Powr Pull Kit. This kinetic style bullet pullers rugged one-piece body and user-friendly ergonomic handle resolves mistakes quickly and easily. The three case holding chucks will accommodate cases from 5.7x28mm and .22 Hornet up through the WSM and RUM family of cartridges. NOTE: Not for use with rimre cartridges. 9412 Powr Pull Kit $23.95

Flash Hole Deburring Tool

Burrs left on the inside of the ash hole during manufacturing can cause erratic ignition. This handy tool automatically locates the hole and quickly removes the burr. A self-centering pilot collar with an adjustable stop allows quick alignment and prevents the removal of too much brass. Flash Hole Deburring Tool with Case Pilot Stop: 88102 .22 Cal. 88107 7mm Cal. 88103 6mm Cal. 88108 .30 Cal. Flash Hole Deburring Tool Case Pilot Stop only: 88122 .22 Cal. 88128 .30 Cal. 88135 88123 6mm Cal. 88129 .32 Cal. 88136 88124 .25 Cal. 88130 8mm Cal. 88137 88125 6.5mm Cal. 88131 .34 Cal. 88138 88126 .270 Cal. 88133 .35 Cal. 88139 88127 7mm Cal. 88134 .36 Cal. 88144 Replacement Rod & Cutter: $14.95

Deburring Tool
Prep case fast, insert the pointed end to remove burrs and bevel inside the case. Fit the open end over the case mouth to remove exterior burrs. Hardened cutting utes stay sharp for years. Knurled for hand or lathe use. Cases from 17 to 45. 09349 Deburring Tool $22.95

Primer Pocket Swager Combo

The perfect tool for quick removal of primer-pocket crimps from military cases. Unlike reaming, the pocket swager forms a perfectly round pocket correct in dimension for American Boxer-type primers. Comes with swaging heads for large and small pockets; ts nearly all 7/8-14 threaded presses with RCBS-type removable shell holders. NOTE: Not for use on progressive presses. 09495 Primer Pocket Swager Combo $37.95

Standard Bullet Puller

Not sure about the powder charge? Need to change bullets? The RCBS Standard Bullet Puller is designed to easily pull and not damage jacketed bullets. It utilizes the standard 7/8-14 thread and may be used in any single stage reloading press having this thread. NOTE: Not for use with rimre cartridges. 09440 Standard Bullet Puller w/o Collet Standard Bullet Puller Collets: 09419 .17 09438 .20 09420 .22 09421 6mm 09422 .25 09423 6.5mm 09424 .270 09425 7mm 09426 .30/7.35mm 09427 .338 09428 .32/8mm 09429 09430 09437 09431 09432 09433 09434 09435 09436 09439 09445 .348 .35/.38 Spec. 9.3mm .375 .40 .41 .416 .44/11mm .45 .475 .500 $23.95 $13.95

$5.95 .375 Cal. 40/10mm .41 Cal. .44 Cal. .45 Cal. $10.95

Deburring Tool .17-.60

The larger Deburring Tool allows the inside and outside chamfering and deburring of cases from 17-caliber up to 60-caliber. Larger than our standard deburring tool, this tool is perfect for handloading cases over 45-caliber. But if you want one deburring tool to do it all, this is it. Made of hardened steel to last a lifetime. 09348 Deburring Tool .17-.60 $25.95

VLD Deburring Tool

The increasing popularity of VLD style bullets has led RCBS to offer a 22 degree VLD Debur tool. The 22 degree angle allows the bullet to be seated into the case without damaging the boattail and ruining accuracy. The VLD debur tool can be used as is, attached to a RCBS Accessory Handle or mounted on the Trim Mate Case Prep Center. 09350 VLD Deburring Tool w/ Handle 09351 VLD Deburring Tool $16.95 $13.95

Powr Pull Bullet Puller

This indestructible tool is the easy way to x mistakes. An improved three-jaw chuck rmly grips the case rim; just rap it on a solid surface like a hammer. Powder and bullet drop into the main chamber for re-use. A soft cushion prevents any damage to bullet. A solid one-piece body adds extra strength and a generous handle adds user comfort. Works with most centerre cartridges from .22 to .45. Guaranteed for life. NOTE: Not for use with rimre cartridges. 09415 Powr Pull Bullet Puller 09418 Replacement Chuck Assembly 09416 Magnum Chuck Assembly (for WSM & Belted Mags) $19.95 $6.95 $6.95

Case Neck Turner w/Auto Feed pictured above

Hand Case Neck Turner

The RCBS Hand Case Neck Turner is designed to peel the brass from the outside of your case necks to a consistent thickness. Most commercially available brass has variances in the case neck thickness. This leads to case neck concentricity and bullet runout issues. Truing up the case neck produces more consistent and accurate hand loaded ammunition. The cutter portion uses caliber specic pilot/mandrels (sold separately) to guide the case neck. The cutter design features the ability to zero the cutter to the pilot/mandrel and then use the micrometer adjustment to dial the desired case neck thickness in .0005 increments. The cutter can also be set for right or left handed use. The Quick Change Case Holder has many advantages over the competition. Most other units use a tap wrench design to hold cartridge cases. Though this is great for threading holes with a self feeding tap, it does nothing to feed your case neck to the cutter. The RCBS Quick Change Case Holder features an ergonomic design that allows you to rotate the case and put forward pressure to feed the case neck to the cutter. The quick case change feature helps to speed up the process without having to use small obtrusive thrumbscrews. 90401 Hand Case Neck Turner w/ Quick Change Case Holder 90402 Quick Change Case Holder 90405-27 Hand CNT Pilot.17-.500 Hand Case Neck Turner Pilots: 90405 .17 Cal. 90413 90406 .20 Cal. 90414 90407 .22 Cal. 90415 90408 .24 Cal. 90416 90409 .25 Cal. 90417 90410 .26 Cal. 90418 90411 .27 Cal. 90418 90412 .30 Cal. 90419 .30 Cal. .31 Cal. .32 Cal. .33 Cal. .34 Cal. .35 Cal. .35 Cal. .36 Cal. 90420 90421 90422 90423 90424 90425 90426 90427 $76.95 $38.95 $11.95 $11.95 .37 Cal. .40 Cal. .41 Cal. .416 Cal. .44 Cal. .45 Cal. .475 Cal. .500 Cal.

Case Neck Turning Accessories

Two tools for fast, easy removal of excessive neck thickness or variation in case thickness. They guide the cutter over the sized cartridge case neck and are supported by the special pilot/reamer. The inside and outside of the neck are turned simultaneously. The Auto Feed Attachment (for Case Trimmer2 and Trim Pro Manual Case Trimmer) advances the cutting tool evenly over the case neck with each turn of the trimmer handle. NOTE: Not to be used with Trim Pro Power Case Trimmer. 98860 Case Neck Turner w/ Auto Feed 98861 Case Neck Turner Hand Case Neck Turner Pilots: 98877 .17 Cal. 98876 .20 Cal. 98878 .223 Cal. 98879 .6mm/243 Cal. 98880 .25 Cal. 98881 6.5mm Cal. 98882 .270 Cal. 98883 98884 98886 98887 98889 98891 7mm Cal. .30 Cal. 8mm Cal. .338 Cal. .35 Cal. .375 Cal. $87.95 $42.95 $10.95

Vibratory Case Cleaner

Fast, dry-media case cleaning. Holds up to 400 .38 Special or 180 .30-06 cases. Removable lid lets you check cases during cleaning. The optional Media Sifter separates clean cases from dry media in seconds. Quiet, powerful motor is thermally protected and durable thick bowl. Two year limited warranty. 87088 Vibratory Case Cleaner 120 VAC 87090 Vibratory Case Cleaner 240 VAC-EUR $104.95 $104.95

Case Media Sifter

Quickly and easily separate the cleaning media from the cleaned cases. First dump the cleaned cases and media into a bucket. Next attach the Media Sifter to the Vibratory Case Cleaner and turn on the cleaner. Slowly pour the cases and media into the media sifter. Allow the Case Cleaner to run until all the media is emptied back into the bowlready for the next time cases need cleaning. 87075 Case Media Sifter $14.95

Sidewinder Case Tumbler

Sidewinder Case Tumbler gives brass cases a thorough cleaning, inside and out. It comfortably can clean up to 300 .38 Special cases or 150 .30-06 cases at a time with either wet or dry media. Its quiet motor is connected to a timer switch for automatic cut-off. Drums come with an extra perforated lid that quickly separates liquid or dry cleaning media from cleaned cases. An eight-ounce bottle of concentrated Liquid Case Cleaner is included. Extra drums are also available and are great for Moly coat application of bullets. Two year limited warranty 87000 Sidewinder Case Tumbler 120 VAC 87005 Sidewinder Case Tumbler 240 VAC-EUR 87050 Sidewinder Case Tumbler Drum Assembly $546.95 $546.95 $103.95

Rotary Case/Media Separator

In short order, separate the cleaned cases from the cleaning media. Merely empty the cases and media from the case cleaner into the separator basket. With several turns of the basket handle the media falls to the bottom of the separator, leaving the cases clean and ready to use. The ne dust from the media is trapped inside the separator. Heavy-duty plastic construction for years of trouble-free service. Capacity: approximately 180 .30-06 cases or 400 .38 Special cases with media. 87076 Rotary Case/Media Separator $43.95

Hand Case Neck Turner Pilot

Pilot/Neck Reamer

Case Cleaning Media

Our Liquid Cleaner (Sidewinder only) gets the dirtiest cases spotless in minutes. Its concentrated too. An 8 oz. bottle makes about 4 gallons. Our dry media can be used in both Sidewinder and Vibratory Case Cleaners. Formula 1 Walnut Shell is ground to a 12/12 sieve size. Formula 2 is Corn Cob. Polish comes individually packed so you can choose various amounts of media to mix. 87067 87068 87069 87015 Formula 1 Walnut Shell Dry Media Formula 2 Corn Cob Dry Media Polishing Compound (5-pack) Liquid Case Cleaner (Sidewinder only) $18.95 $20.95 $6.95 $7.95

The Trim Pro Power Case Trimmer is better than having a personal lathe for case trimming.

The most popular Trim Pro Shell Holders and pilots are included with the kits or can be purchased separately.

Trim Pro Manual Case Trimmer Kit

With its spring-loaded lever the Shell Holder keeps cases securely locked in place and aligned with the cutter. It is designed for .001 accuracy even with a spent primer in the case. Works with standard pilots and features a micrometer ne-adjustment bushing calibrated for setting exact trim length. Includes: Shell Holders 2, 3, 4 and 10. Pilot calibers: .22, .24, .25, .27, .28, .30, .35, .44 and .45. 90355 Trim Pro Manual Case Trimmer Kit 90357 Trim Pro Manual Case Trimmer (w/out Shell Holders or Pilots) 86883 Dust Cover 98930 Power Drill Converter NEW 90250 Replacement Carbide Trimmer Cutter Head NEW 09364 Replacement .50 Cal Trimmer Cutter $129.95 $105.95 $11.95 $8.95 $44.95 $19.95

Trim Pro Case Trimmer Stand

Raise your manual case trimmer to new heights with the Trim Pro Stand. Provides more working room and hand clearance. Also provides convenient storage space for Trim Pro Shell Holders and Pilots. Stand mounts easily on accessory base plate or directly on a bench. Dimensions: 4-7/8 x 8-5/8 x 1. Manual trimmers only. NOTE: Pilots and shell holders not included. 90360 Trim Pro Case Trimmer Stand $25.95

Trim Pro Case Holder Accessory

Upgrade your Rotary Case Trimmer2 simply by adding this leverhandle shell holder system. Makes case trimming faster and easier than using the old draw collet system. Its also more accurate because the case is perfectly aligned. Uses Trim Pro Shell Holders. Not for use with Rotary Case Trimmer. 90358 Trim Pro Case Holder Accessory $53.95

Trim Pro 3-Way Cutter

This is automated case preparation at its nest. Our 3-Way Cutter is one of those accessories you cant live without. Its unique threeblade head conguration trims cases like our standard cutting tool, but in addition to trimming to length, inside blades chamfer the case while an outside blade deburrs it. The 3-Way cutter attaches easily to both Case Trimmers and Trim Pros.
NEW 90251

Trim Mate Case Prep Center & Accessories

Case preparation is ve times easier and faster with the Trim Mate Case Prep Center. Five gear-driven rotating heads turn the tedious task of chamfering, deburring, primer pocket cleaning, military crimp removal and ash hole deburring into childs play. Works great with the Trim Pro Power Case Trimmer so you can do case prep and trimming at the same time. Two stationary positions hold case neck brushes, and a cupped area holds dry case neck lube. The Prep Center includes large and small primer pocket brushes, inside chamfering and outside deburring tools, medium and small case neck brushes and a packet of dry case neck lube. Two year limited warranty. Accessories such as Primer Pocket uniformers are manufactured with high speed tool steel cutters and true the primer pocket wall and bottom. Military Crimp Removers are made with hardened steel cutters and ream out the crimp ring found in military cases. 90375 Trim Mate Center 120 VAC 90376 Trim Mate Center 240 VAC-EUR 90377 Dry Case Neck Lube 90378 Primer Pocket Uniformer, large rie 90383 Primer Pocket Uniformer, large pistol 90379 Primer Pocket Uniformer, small 90380 Military Crimp Remover, large 90381 Military Crimp Remover, small 90382 Dust Cover 09351 VLD Deburring Tool 09561 .50 BMG Carbide Primer Pocket Uniformer 09562 .50 BMG Military Crimp Remover NEW 90384 TM Carbide Chamfer Tool NEW 90385 TM Carbide Debur Tool NEW 90386 TM Military Crimp RemoverSmall NEW 90387 TM Military Crimp RemoverLarge NOTE: Flash Hole Debur Tool found on page 19. $157.95 $183.95 $3.95 $28.95 $28.95 $28.95 $20.95 $20.95 $13.95 $13.95 $54.95 $31.95 $44.95 $44.95 $20.95 $20.95

Case Trimmer Pilots

Designed with a taper to guide CASE TRIMMER PILOTS pilot into the case mouth. Prevents 09377 .17 Cal. 09388 case from wobbling when 09376 .20 Cal. 09389 trimming case to length. Refer to 09378 .22 Cal. 09390 the reference chart on page 30 09379 .24 Cal. 09391 to determine the correct pilot for 09380 .25 Cal. 09392 a specic caliber. For use with 09381 .26 Cal. 09393 RCBS Trim Pro Case Trimmers, 09382 .27 Cal. 09397 Rotary Case Trimmer2 and 09383 .28 Cal. 09394 Rotary Case Trimmer. For use with RCBS Case Trimmers only (See chart at right) See the Reference Chart on page 34 to determine the Trim Pro Shell Holder number required. TRIM PRO PISTOL PACK 90361 $24.95
CT Pilot, 40 Caliber CT Shell Holder #6 CT Shell Holder #16 CT Shell Holder #18 CT Shell Holder #27 09384 09385 09386 09387 .30 Cal. .31 Cal. .32 Cal. .33 Cal. 09395 09396 09398 09399 NEW 09400 $4.95 .34 Cal. .35 Cal. .36 Cal. .37 Cal. .40 Cal. .41 Cal. .416 Cal. .44 Cal. .45 Cal. .45-R Cal. .475 Cal. .500 Cal. .50-R Cal

Replacement 3-Way Carbide Cutter Head

$62.95 .270 Cal. 7mm Cal. .30 Cal. .32 Cal. .338 Cal. .375 Cal. Trim Pro 3-Way Pilot/Chamfer 90256 90257 90258 90259 90260 90261 .17 Cal. .20 Cal. .22 Cal. 6mm Cal. .25 Cal. 6.5mm Cal.

$44.95
$10.95 90262 90263 90264 90265 90267 90271 .270 Cal. 7mm Cal. .30 Cal. .32 Cal. .338 Cal. .375 Cal.

Trim Pro 3-Way Cutters: (includes cutter & pilot) 90276 90277 90278 90279 90280 90281 .17 Cal. .20 Cal. .22 Cal. 6mm Cal. .25 Cal. 6.5mm Cal. 90282 90283 90284 90285 90287 90291

Trim Pro Power Case Trimmer Kit

Youll actually look forward to case trimming. A low RPM motor delivers plenty of torque. The spring-fed cutter is easy and accurate. No pushing or feeding pressure is needed, leaving your hands free for deburring or other tasks. A positive locking handle and integral power switch makes it simple and safe. Includes: Shell holders 2, 3, 4 and 10. Pilot calibers: .22, .24, .25, .27, .28, .30, .35, .44 & .45. Two year limited warranty. 90350 90351 90359 90364 86882 09406 Trim Pro Power Case Trimmer Kit 120 VAC Trim Pro Power Case Trimmer Kit 240 VAC-EUR Power Unit Only 120 VAC Power Unit only 240 VAC-EUR Dust Cover Case Trimmer Cutter $358.95 $385.95 $272.95 $308.95 $14.95 $18.95

Trim Pro Shell Holders

The RCBS Trim Pro Case Trimmers feature unique shaped shell holders to rmly hold your rie and pistol cases in perfect alignment with the cutter. This system allows for accurate and repeatable case trimming lengths and leaves the case mouths square to the body. The Trim Pro Shell Holders are numbered the same as our standard shell holders to make identication and use simpler. Available individually, or in pre-packs, for most popular rie and pistol cartridges. TRIM PRO SHELL HOLDERS
90301 90302 90303 90304 90305 90306 90307 90308 90309 90310 90311 #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 90312 90313 90314 90315 90316 90317 90318 90319 90320 90321 09323 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #23 90324 90325 90326 90327 90328 90330 90332 90333 90334 90335 90336 #24 #25 #26 #27 #28 #30 #32 #33 #34 #35 #36 90337 90338 90339 90340 90341 90342 90343 90344 90348 $6.95 #37 #38 #39 #40 #41 #42 #43 #44 #48

TRIM PRO PILOT & SHELL HOLDER 90363 $49.95

CT Pilot 22 Cal. CT Pilot 24 Cal. CT Pilot 25 Cal. CT Pilot 27 Cal. CT Pilot 28 Cal. CT Pilot 30 Cal. CT Pilot 35 Cal. CT Pilot 44 Cal. CT Pilot 45 Cal. CT Shell Holder #2 CT Shell Holder #3 CT Shell Holder #4 CT Shell Holder #10

Case Trimmer Collets

Works like a draw collet on a lathe. Secures cases for trimming to length. Refer to the reference chart on page 34 to determine the correct collet for a specic caliber. NOTE: For use with Rotary Case Trimmer and Rotary Case Trimmer2 only. Case Trimmer Collets #1 09371 #2 09372 #3 09373 #4 09374 $11.95

TRIM PRO RIFLE PACK 90362 $23.95

CT Shell Holder #2 CT Shell Holder #3 CT Shell Holder #4 CT Shell Holder #10

Strips automatically feed and can be interlocked for uninterrupted priming Uses standard RCBS Shell Holders and incorporates a fully adjustable seating depth Primer tray is easily removed for loading and can accommodate 100 primers

Machined from high-quality aluminum and comes with large and small primer rods

Adjustable handle provides excellent leverage and sensitive feel

Universal Hand Priming Tool

The Universal Hand Priming tool combines features found on our other two hand priming tools into one convenient package. We took the universal shell holder from the APS tool and combined it with the primer tray from the standard tool to offer unmatched performance. The universal shell holder will accept cases from .32 ACP to .45-70 Government. The patented safety gate isolates the primer seating operation from the primer supply virtually eliminating the possibility of tray detonation. The removable primer tray orients your primers for use and will t any manufacturers primer packaging. Includes accessories to seat large and small rie or pistol primers. 90201 Universal Hand Priming Tool $74.95

APS Hand Priming Tool

Who hasnt dumped a load of primers onto a tray only to have half the box scatter all over the oor? Trying to gure out if those primers left in the tube were standard or magnum can also be a headache. Now you can eliminate those priming headaches. Its fast and simple. The APS Hand Priming Tool is simply revolutionary! First, the Universal Shell Holder completely eliminates the need for additional shell holders, accepting case sizes from .32 ACP to .45-.70 Government. Secondly, each strip is color-coded for easy identication and holds up to 25 primers. The primer strips are even designed to connect to each other for continuous feed. Now, theres no need to handle loose primers or worry about contamination. The APS Hand Priming Tool is also completely portable. Youre no longer tied down to your bench to prime. Hand priming has never been easier, safer, or more convenient! 88507 APS Hand Priming Tool $63.95

APS Primer Strip Loader

For those of you who may already have a supply of CCI or Federal primers or any other brands in conventional packaging, not to worry The APS Primer Strip Loader allows you to quickly ll empty primer strips. Its simple to use and even faster than loading a primer tube! Each push of the handle safely inserts 25 primers into an APS strip for use with the RCBS APS Priming System. 88505 APS Primer Strip Loader $38.95

Ram Priming Unit

The Ram Priming Unit gives you better feel by seating the primer at the top of the press stroke. You can also pre-set a positive stop to speed up your reloading process. Works with any single stage or turret press with 7/8-14 thread and RCBS-type single stage shell holder. Includes large and small primer rod assemblies for Boxertype rie and pistol primers. 09165 Ram Priming Unit $26.95

Automatic Priming Tool

The Automatic Priming Tool is fast, accurate and highly sensitive due to a unique single-stage lever system. Primers feed through the auto primer feed tube one by one, preventing potential contamination by oily ngers. Two primer rod assemblies and two primer feed tubes are included. 09460 Automatic Priming Tool $108.95

.50 BMG Ram Priming Unit

The .50 BMG Ram Priming Unit in conjunction with the AmmoMaster Single Stage press allows you to re-prime this powerful cartridge. It comes supplied with a at and cupped primer plug to accommodate the two styles of primers available for the .50 BMG. 88772 .50 BMG Ram Priming Unit $52.95

Hand Priming Tool

Our Hand Priming Tool not only seats primers quickly, its also the safest. A patented safety mechanism separates the seating operation from the primer supply, virtually eliminating the possibility of tray detonation. Fits in your hand for portable primer seating. Primer tray installation requires no contact with the primers. Uses the same RCBS shell holders (post-1980) as RCBS presses. Made of durable cast metal. Includes large and small primer plugs. 90200 Hand Priming Tool $49.95 90202 UHPT Tray & Lid Assembly $8.95 (Universal HPT square tray & lid compatible with 90200 HPT)

Automatic Primer Feed Combo

Drops primers one at a time into the Primer Plug and sleeve. Stops misres as greasy ngers never need to touch primers. Nylon Primer Pick-up keeps primers from falling out. Tube capacity 100 primers. For Rock Chucker II Press; also ts JR and Reloader Special Presses. NOTE: Not for use with RC Supreme 09580 Auto Primer Feed Combo for large and small primers $32.95 09581 Large Primer Tube Only $14.95 09582 Small Primer Tube Only $14.95

APS Press-Mounted Priming Tool

For those of you who have limited bench space, or prefer priming cases on a press, weve designed the APS Press-Mounted Priming Tool just for you. It provides the same features as the APS Bench-Mounted Tool except it attaches to any single stage press that accepts standard 7/8-14 threaded dies. 88503 APS Press-Mounted Priming Tool $80.95

APS Unprimed Primer Strips

These strips are color-coded for fool-proof identication. Each strip holds 25 primers. Strips can be loaded with the primer of your choice using the striploader. Primers not included. 88510 88511 88512 88513 88514 88515 88516 88517 88518 88519 88520 88521 APS Strip, Lg. Rie 8/pk APS Strip, Lg. Pistol 8/pk APS Strip, Sm. Rie 8/pk APS Strip, Sm. Pistol 8/pk APS Strip, Mag Lg. Rie 8/pk APS Strip, Mag Lg. Pistol 8/pk APS Strip, Mag Sm. Rie 8/pk APS Strip, Mag Sm. Pistol 8/pk APS Strip, BR2 Lg. Rie 8/pk APS Strip, BR4 Sm. Rie 8/pk APS Strip, 5.56mm Military 8/pk APS Strip, 7.62mm Military 8/pk Yellow White Yellow White Blue Red Blue Red Black Black Orange Orange $5.95 $5.95 $5.95 $5.95 $5.95 $5.95 $5.95 $5.95 $5.95 $5.95 $5.95 $5.95

Primer Catcher
Made to keep spent primers off the oor when ejected from red cases. Plastic clip holds Primer Catcher snug and secure to press. Easily removed for emptying. For Rock Chucker, JR and Reloader Special Presses only. 09114 Primer Catcher $9.95

APS Bench-Mounted Priming Tool

The APS Bench-Mounted Priming Tool was created for those reloaders who prefer to have a separate, specialized tool dedicated just to priming. Its a tool with exceptional feel for precise and consistent seating of primers. The handle on the bench-mounted tool is large by design to provide hours of comfortable loading. Handle position is adjustable for bench height or personal preference. 88501 APS Bench-Mounted Priming Tool $126.95

Universal Primer Arm2

Designed for fast, accurate primer seating. Primer plugs and sleeves included for large and small rie and pistol primers. Changing sizes is fast and easyless than 60 seconds. Fits Rock Chucker II, JR, Reloader Special and most C Presses. NOTE: Not for use with RC Supreme 09550 Universal Primer Arm for large and small primers 09552 Primer Plug, sleeve and spring for large primers 09553 Primer Plug, sleeve and spring for small primers $16.95 $4.95 $4.95

Primer Tray2
The Primer Tray2 handles todays larger primer package quantities. The square shape makes it easier to handle. Grooved tray surface quickly positions primers anvil-side up. 09480 Primer Tray2 $5.95

RC-130 Mechanical Scale

The RC-130 low-cost scale has many of the same quality features that you nd in our other scales. A precision-machined aluminum beam means that weight increments are accurate and repeatable. You dont get that in a scale with a plastic beam! Beam poises are metal plates, just like higher-priced scales. Theyre designed to be easy to adjust and to stay put after you set them. True magnetic dampening completes the picture to allow fast, stable, and accurate readings. The critical beam pivots are steel-on-steel, not steel-on-aluminum like another company uses. The pivot bearings are cylindrical for the smallest possible contact areaensuring better accuracy. The RC-130 weighs up to 130 grains with an accuracy of +/- 0.1 grains. The sturdy base and easy-to-read index bar are molded from tough ABS polymer. The non-static powder pan with integral hanger allows easy transfer of powder to the cartridge case. And naturally the RC-130 is backed by the RCBS Limited Lifetime Warranty. 90400 RC-130 Mechanical Scale $56.95

5-0-2 Scale
Big-scale features and capacity with an affordable price. Twopoise design lets you weigh up to 505 grains with +/- 0.1 grain accuracy. The 5-0-2 also sports our magnetic dampening system for fast readings, maintenance-free movement and a rugged diecast metal base. Tip-proof aluminum pan for loading convenience. Ounce-to-grain conversion table on the base for handy shotshell reference. 09069 5-0-2 Scale 09075 Dust Cover $94.95 $10.95

RangeMaster 750
The RangeMaster 750 Scale has a sleek design with many convenient features. The compact lightweight scale can operate on AC or DC power so it is perfect for use on your reloading bench or at the range. The large LCD display is easy to read in grains or grams and weighs precisely to +/- 0.1 grain. Capacity is 750 grains. The RangeMaster Scale comes equipped with two precision calibration/check weights and an AC adaptor ( 9V battery not included). The RCBS RangeMaster 750 is the perfect choice for the serious shooter that demands the best performance, value and portability. One year limited warranty. 98927 RangeMaster 750 120 VAC/9VDC 98926 RangeMaster 750 240 VAC-EUR/9VDC $156.95 $156.95

ChargeMaster 1500
The ChargeMaster 1500 Scale is built from the ground up as a high performance reloading scale. The large LCD display is easy to read in grains or grams and weighs precisely to +/- 0.1 grain. With a 1500 grain capacity you can weigh powder, bullets, cases or loaded cartridges. The scale is fast and easy to calibrate with the two calibration/check weights that are included. AC adaptor is included. The ChargeMaster 1500 Scale was designed for the serious shooter that wants the best high tech scale on the market. The ChargeMaster 1500 Scale can be operated as an independent electronic scale or it can be upgraded to an automated powder dispensing system with the addition of the ChargeMaster Dispenser (shown on page 28). One year limited warranty. 98920 ChargeMaster 1500 120 VAC 98921 ChargeMaster 1500 240 VAC-EUR $246.95 $246.95

5-0-5 Scale
The legendary standard in mechanical scales. The 5-0-5 features our magnetic dampening system plus large black-on-white graduations for fast recognition. Its three-poise beam is graduated in 10, one and 0.1 grain increments to achieve +/- 0.1 accuracy. A tip-proof aluminum pan keeps powder from sticking or spilling. Hardened knife blades ride on agate bearings for long life and sensitivity. Theres even ounce-to-grain conversion on the base for shotshell reloaders. Capacity: 511 grains. 09071 5-0-5 Scale 09075 Dust Cover $115.95 $10.95

10-10 Scale
Need up to 1,010-grain capacity* with +/- 0.1-grain sensitivity? You get it with the RCBS 10-10. Its approach-to-weight system speeds reloading and helps you avoid overloads. A micrometer poise allows easy adjustment at any setting from 0.1 to 10 grains. Other features: magnetic dampening, non-stick/non-spill aluminum pan, self-aligning agate bearings, hardened steel pivot knives and a tough plastic cover. *With included attachment weight 09073 10-10 Scale $195.95

Scale Check Weights

You rely on your scale for safe, accurate powder charges. Over time, accumulated grit and dust can affect accuracy. A quick test with RCBS Scale Check Weights will tell you if your scale is reading correctly. Sets include: Standard set of 60.5 grains for powder charges (2x20, 1x10, 1x5, 2x2, 1x1, 1x.5). Deluxe set of 510.5 grains for bullets, cases and powder (1x 200, 2x100, 1x50, 2x20, 1x10, 1x5, 2x2, 1x1, 1x.5, 1 forceps). *Deluxe Scale Check Weights pictured above. 98990 98992 09078 09079 Standard Scale Check Weights $35.95 Deluxe Scale Check Weights $61.95 Scale Pan (5-0-2, 5-0-5, 5-10 & 10-10 scales) $19.95 Scale Pan Support (5-0-2, 5-0-5, 5-10 & 10-10 scales) $21.95

Scale Pan with Integrated Funnel

Is your powder funnel always missing when you need it most? The RCBS Scale Pan Powder Funnel eliminates that problem. The Scale Pan features an integrated powder funnel that allows you to pour the powder directly into the case. The new scale pan is designed for use with electronic scales and powder dispensers. 09090 Scale Pan w/Integrated Funnel $7.95

Shown with optional Powder Measure stand, not included.

ChargeMaster Dispenser
The ChargeMaster Dispenser can be added to the ChargeMaster 1500 Scale to form an unmatched combination of speed and accuracy. When the ChargeMaster Dispenser is coupled with the ChargeMaster 1500 Scale, it now has all of the same features as the ChargeMaster Combo. The individual purchasing of the units is to accommodate individual budgets. The ChargeMaster Dispenser requires the ChargeMaster 1500 Scale (sold separately) to operate. One year limited warranty. NOTE: Use with smokeless powder only. Do NOT use with black powder! 98922 ChargeMaster Dispenser only $265.95

ChargeMaster Combo
The ChargeMaster Combo features the ChargeMaster 1500 Scale and ChargeMaster Dispenser, preassembled to form an unmatched combination of speed and accuracy. There is no longer a need for timely calibration to the type of powder being used. Simply ll the 1 lb+ capacity powder hopper with smokeless powder, enter the desired charge and press the dispense button. Average dispensing time is under 30 seconds for a 60 grain extruded powder charge. Dispensing can be done in grains or grams mode. Accurately weighs and dispenses all extruded (stick), ball (spherical) and ake smokeless powder from 2.0 to 300 grains to +/- 0.1 grain. You can store up to 30 of your favorite loads in memory for fast easy recall. The front to back layout allows easy access to the scale pan by right or left handed users. The clear cover eliminates uctuations in weighing caused by air currents without obscuring your view of the charge being dispensed. The powder drain feature allows for convenient and easy emptying of the powder hopper. Power to the Dispenser is provided by the connection to the ChargeMaster 1500 scale so there is only one power cord to manage. The ChargeMaster 1500 Scale and dispenser can be purchased separately or as a Combo set. One year limited warranty. NOTE: Use with smokeless powder only. Do NOT use with black powder! 98923 ChargeMaster Combo 120 VAC 98924 ChargeMaster Combo 240 VAC-EUR $470.95 $470.95

Powder Trickler System Combo

The RCBS Powder Trickler System speeds up the process of weighing your powder charges. The Powder Trickler system attaches to any Uniow or standard Quick Change powder measure. Used in conjunction with the Advanced Powder Measure Stand, the Powder Trickler System allows you to dispense and trickle a powder charge directly onto a scale pan without having to remove the scale pan for the initial lling. The unit can be adjusted for right or left handed use and the dispensing chute adjusts to allow you to drop the powder charge directly onto the scale pan. With a few turns of the Trickler handle, your weighed charge is complete. The Powder Trickler System is available as a combo only. NOTE: Not for use with Quick Change High Capacity, Little Dandy or Black Powder Measure. 09091 Powder Trickler System Combo (PTS and APM) $56.95

Black Powder Measure

Answering our customers calls for black powder products, RCBS new Black Powder Measure is sure to be a hit. The one pound capacity aluminum powder hopper and cap with a non-static powder level indicator shows you how much powder is left in the hopper. The brass non-sparking metering cylinder and adjustment screw are also features that the black powder enthusiast is looking for. With a 120 grain charge capacity, the optional one-piece 24 aluminum drop tube is a must to get all of the powder into the case. The RCBS Black Powder Measure is the perfect unit for Black Powder and Cowboy Action shooters. 98842 Black Powder Measure 98856 24 Aluminum Drop Tube $160.95 $44.95

Competition Powder Measure

The Competition Powder Measure starts with the proven Uniow Powder Measure with its precision ground metering drum and honed main casting. RCBS then adds a powder bafe and UPM Micrometer Adjustment screw. The Powder Bafe controls the powder ow and the pressure of the powder column on the metering unit. The UPM Micrometer Adjustment screw allows precise adjustments to the metered charge as well as allowing you to record the number for future reference and reuse. Handle placement can be used on the right or left side simply by changing the orientation of the metering drum. The powder measure will accurately meter, by volume, all types of smokeless powderball, ake or cylindrical (stick). The Rie unit meters volumetric powder charges from 10-110 grains. The Pistol/Small Rie unit meters volumetric powder charges from .5 to 40 grains. The Combo unit includes both the Rie and Pistol metering drums and complete UPM Micrometer Adjustment screw assemblies. NOTE: All powder measures should be used in conjunction with an accurate powder scale to set the desired charge and to occasionally check charges during the reloading process. NOTE: Do NOT use with black powder! 98908 Competition Powder Measure Pistol/Small Rie 98909 Competition Powder Measure Rie 98910 Competition Powder Measure Combo $147.95 $147.95 $221.95

Advanced Powder Measure Stand

This stand will raise most Powder Measures 9-1/2 (with standard 7/814 thread) leaving plenty of space for positioning a powder scale pan or cases in a loading block under the drop tube. Bolts easily to a reloading bench or table. Also serves as a stand for holding a Piggyback II, Piggyback3 or 4 when not in use. NOTE: Not for use with Little Dandy powder measure. 09092 Advanced Powder Measure Stand $25.95

Micrometer Adjustment Screw for Uniow Powder Measure

The secret to faster reloadinggo by the numbers. Add the UPM Micrometer to your Uniow Powder Measure, and you can record precise settings for your powder charges. Determine the load number and dial it intime after time. An easy installation too; it simply replaces the Uniows standard metering screw. UPM Micrometer Adjustment Screws 98901 Large Cylinder - .685 diameter $52.95 98902 Small Cylinder - .500 diameter $52.95

Drop Tube Adaptor

Drain Attachment

QC Metering Large Cylinder Metering Assy

Small Metering Assy

Powder Bafe ts inside of powder hopper and provides more even ow of powder. .22-.270 Drop Tube .30-.45 Drop Tube .50 Drop Tube QCHC Drain Attachment QCHC Metering Assy

Powder Measure Stand raises the work at hand to a more comfortable level. Constructed of sturdy die cast metal for durability.

Quick Change Powder Measure

The RCBS Quick Change Powder Measure offers the ability to go from light pistol to magnum rie charges quickly. The powder hopper has been increased in size to hold a pound of smokeless powder. The QCPM features metering assemblies that change out with the pull of a pin. Extra metering assemblies can be purchased to have them preset for your favorite smokeless powder charges. The drain attachment empties the powder hopper without the need to remove it from the stand or press. The Quick Change Powder Measure includes one each Small and Large Metering Assembly and the Drain Attachment. The Quick Change parts can be used to upgrade your existing Uniow powder measure to this system. NOTE: Do NOT use with black powder! 98840 Quick Change Powder Measure 90226 Quick Change Powder Bafe $111.95 $11.95

Quick Change High Capacity Powder Measure

The RCBS High Capacity Quick Change Powder Measure offers the ability to dispense large rie charges of up to 250 grains of smokeless powder. The large hopper can accommodate two pounds of smokeless powder. The HCQCPM features metering assemblies that change out with the pull of a pin. Extra metering assemblies can be purchased to have them preset for your favorite charges. The drain attachment empties the powder hopper without the need to remove it from the stand or press. Includes one metering assembly, .22-.270 Drop tube, .30-.45 Drop Tube, .50 Drop Tube and the QCHC Drain Attachment. NOTE: Do NOT use with black powder! 98841 Quick Change High Capacity Powder Measure 90227 QC HC Powder Bafe $133.95 $13.95

Uniow Powder Measure

Throws consistently accurate charges reload after reload. Powder pours uniformly from measuring cylinder into case, thereby eliminating the hazards of overloads caused by clogging when charges are dumped. Changes easily from charge to charge without emptying powder hopper. Numbered measuring screw is used for reference to nd a given charge at a later date. The measuring cylinder has precision ground surfaces and slides into the honed main casting for a precision t. Standard 7/8 14 thread. Includes stand plate, drilled for easy mounting on a bench or under a reloading die lock ring. Two drop tubes for .22 caliber and up are supplied. The Uniow Powder Measure is fully capable of accurately measuring all three major powder types ball, cylindrical and ake. It will even cut the cylindrical powders so that a precise charge can be obtained. NOTE: The Uniow Powder Measure should be used in conjunction with an accurate powder scale for setting the original charge and for checking charges occasionally during the run. NOTE: Do NOT use with black powder! 09010 09002 09004 86880 09028 Uniow Powder Measure Uniow Powder Measure Small Measure Cylinder Assembly Small Dust Cover Drop Tube .17 to .20 Cal. $105.95 $108.95 $37.95 $11.95 $9.95

Quick Change Powder Funnel

With the current trend of large bodied rie cases, existing powder funnels sometimes do not t properly over the cases. The RCBS Quick Change Powder Funnel eliminates that problem. The QC Powder Funnel features adapters that are supported by the body of the case and allow you to choose the optimum powder ow. The 4 drop tube helps to get that compressed powder charge into the case. The drop tubes are stackable so you can increase the drop length if necessary. With the adapters removed, the powder funnel allows you to return powder into the original container quickly. 9190 9191 9192 9193 9194 9195 9196 Quick Change Powder Funnel Kit $13.95 (Funnel, 5 adapters and one drop tube) Quick Change drop tube $6.95 Adapter .17-.20 $2.95 (.17 Rem, .204 Ruger, .218 Bee, .22 Hornet) Adapter .22-.264 $2.95 (.222 Rem, .223 WSSM, .243 Win, 6.5x55) Adapter .27-7mm $2.95 (.270 Win, 7mm Ultra Mag, .32 ACP) Adapter .30-.375 $2.95 (.30-30 Win, .338 Win Mag, .375 H&H, .357/38 Spl, 9mm, .32 H&R) Adapter .40+ $2.95 (.416 Rem, .460 Wby, .40/10mm, .41/.44 Mag, .45 ACP, 500 S&W)

Quick Change Accessories

The Quick Change Accessories can be used to upgrade your existing Uniow powder measure to this system. You simply replace the metering cylinder and metering screw that came with your Uniow with the Quick Change accessories. The QC Drop Tube Adaptor allows you to use the drop tubes from the QC High Capacity powder measure or the Drop Tube and Adapters from the Quick Change Powder Funnel on your Uniow or Quick Change powder measure. 98843 98844 98845 98846 98855 QC Small Metering Screw Assembly QC Large Metering Screw Assembly QC Metering Cylinder QC Drain Attachment QC Drop Tube Adaptor $17.95 $11.95 $31.95 $10.95 $3.95

Quick Change High Capacity Accessories

The Quick Change High Capacity Metering assembly is available so that you can preset them to your favorite large capacity rie charges such as 110 grains for your 30-378 WBY or 120 grains for the 600 Nitro Express. The QC High Capacity Drop Tubes, in conjunction with the QC Drop Tube Adaptor, allow the use of these on existing Uniow or QC powder measures. 98849 98850 98852 98853 98854 QC HC Metering Screw Assembly QC HC Drain Attachment QC Drop Tube .22-.270 QC Drop Tube .30-.45 QC Drop Tube .50 $19.95 $11.95 $5.95 $5.95 $5.95

Powder Measure/Piggyback Stand

This stand will raise most Powder Measures 6-1/2 (with standard 7/814 thread) leaving plenty of space for positioning a powder scale pan or cases in a loading block under the drop tube. Bolts easily to a reloading bench or table. Also serves as a stand for holding a Piggyback II, Piggyback3 or 4 when not in use. 09035 Powder Measure/ Piggyback Stand $32.95

Case Activated Linkage Kit

Convert the Uniow Powder Measure (not included) for use on most four or ve-station progressive presses. The Uniow Powder Measure can have the regular Measuring Screw or the optional Micrometer Adjustment Screw installed, depending on your preference. Three powder bushings are included for most popular rie and pistol calibers: Small Rie for .22 through .270 calibers, Large Rie for 7mm through 45 calibers and Pistol for .32 through .45 calibers. The powder bushings are designed to eliminate powder spillage around the case mouth. Fully adjustable for all of the different variations in case length. 98911 Case Activated Linkage Kit $89.95

Powder Bafe
Uniform loads require consistent powder charges, and many handloaders nd a bafe helps them throw more consistent charges. The bafe is specically designed for the RCBS Powder Measures and provides handloaders a uniform powder ow by controlling the gravity feed pressure of the powder column on the metering unit. 90225 Powder Bafe 90226 QC Powder Bafe 90227 QC HC Powder Bafe $ 8.95 $11.95 $13.95

Powder Funnel
Weve even managed to improve upon the basic plastic funnel. Ours features a specially designed drop tube to avoid any messy powder spills around case mouths, a non-stick, anti-static surface, plus a square lip to keep the funnel from rolling around. Spout will accommodate the WSM cartridges. 09087 Powder Funnel .22-.50 Cal. 09086 Powder Funnel .17-.20 Cal. $5.95 $7.95

Powder Trickler
Heres the fast way to feed powder to your scale. Turn the small knob and powder trickles into the pan one kernel at a time. Largecapacity reservoir, extra-wide base for stability, and a perfect height for most powder scales.
NEW 09093

09094 Powder Trickler Powder Trickler2 Upgrade Kit

$17.95 $6.95

Little Dandy Rotor Knob

Attaches to the Little Dandy Rotor with a setscrew, making the rotor easier to turn. Crafted of high-strength aluminum with knurled outer surfaces for maximum nger-touch control.

Little Dandy Pistol Powder Measure

Perfect for handloading pistol shooters and select small-caliber rie shooters. There are 28 interchangeable xed-charge powder rotors available and you can load any popular powder with the Little Dandy in up to 400 different load combinations. Theres no readjustment needed after changeover. Can be used hand-held or conventional bench-mounted tool with optional Powder Measure Stand. $6.95 NOTE: Do NOT use with black powder! 86040 Little Dandy Pistol Powder Measure $43.95

SHELL HOLDER CHART

09201 Number 1: .218 Bee .25-20 Winchester .32-20 Winchester 09202 Number 2: .22 Savage High Power .25-35 Winchester 6.5mm x 55 Swedish Mauser 7-30 Waters .307 Winchester .308 Marlin Express .30-30 Winchester 7.5mm x 54 French MAS 7.5mm x 55 Schmidt-Rubin .32 Winchester Special .32-40 Winchester .356 Winchester .375 Winchester .38-55 Winchester & Ballard 09203 Number 3: .22 Bench Rest Remington .22-250 Remington (.22 Varm) .240 Weatherby Magnum .243 Winchester 6mm Bench Rest Remington 6mm Remington (.244 Remington) .25-06 .250 Savage (.250-3000 Savage) .257 Roberts .257 Roberts Improved (40) * .260 Remington 6.5 Creedmoor 6.5mm-06 6.5-284 Winchester 6.5 x 47 Lapua 6.5mm x 57 .270 Winchester .280 Remington (7mm Exp. Rem.) .284 Winchester 7mm Bench Rest Remington 7mm-08 Remington 7mm x 57 Mauser (7mm Mauser) 7mm x 64 Brenneke .30 T/C .30-06 Springeld .300 Savage .308 Winchester 7.65mm x 53 Mauser (Belgian) 7.7mm x 58 Japanese Arisaka 8mm x 57 Mauser (8mm Mauser) 8mm-06 .338 Federal .338-06 .35 Whelen .358 Winchester 9.3mm x 62 Mauser .370 Sako Mag/9.3x66 Sako .400 CorBon .45 Glock Action Pistol .45 Automatic (.45 ACP) 09204 Number 4: .257 Weatherby Magnum .264 Winchester Magnum ** 6.5 Remington Mag .270 Weatherby Magnum 7mm Remington Magnum ** 7mm Shooting Times Westerner 7mm Weatherby Magnum .300 RCM .30-338 Winchester Magnum .300 Holland & Holland Magnum .300 Weatherby Magnum .300 Winchester Magnum ** .308 Norma Magnum 8mm Remington Magnum .338 RCM .338 Winchester Magnum .340 Weatherby Magnum .350 Remington Magnum 9.3mm x 74 Rimmed .375 Ruger .375 Holland & Holland Magnum .416 Ruger .416 Remington Magnum .450 Marlin .458 Winchester Magnum .458 Lott .460 Smith & Wesson 09205 Number 5: .348 Winchester 09206 Number 6: .22 Remington Jet 5.6mm x 50 Rimmed .357 Magnum .357 Remington Maximum .38 Smith & Wesson .38 Special 09207 Number 7: .30-40 Krag .303 British 09208 Number 8: .45 Auto Rim 09209 Number 9: 6.5mm x 54 Mannlicher-Schoenauer .35 Remington 09210 Number 10: .17 Remington .17 Remington Fireball .204 Ruger .221 Remington Fire Ball .222 Remington .222 Remington Magnum .223 Remington (5.56mm) 6mm x 45 7mm Thompson/Center Ugalde .380 Auto Pistol 9mm x 18 Ultra 09211 Number 11: .220 Swift 09212 Number 12: .22 Hornet .22 K-Hornet 09213 Number 13: 7.62mm x 54R Russian 09214 Number 14: .30-378 Weatherby Magnum .338 Lapua .338-378 Weatherby Magnum .378 Weatherby Magnum .40-65 Shiloh-Sharps - 408" .45-70 U.S. Government .45-90-2.4" Sharps Straight .45-100-2.6" Sharps Straight .45-110-2 7/8" Sharps Straight .45-120-3 1/4" Sharps Straight .460 Weatherby Magnum 09215 Number 15: 6.5mm x 50 Japanese Arisaka 09216 Number 16: .30 Luger (7.65mm Luger) .30 Mauser (7.63 Mauser) .356 TSW 9mm FAR 9mm Luger 9mm Makarov 9mm x 21 9mm x 23 Winchester 09217 Number 17: .30 M1 Carbine .32 Auto (7.65mm Automatic) 09218 Number 18: .44 Magnum .44 Special 09219 Number 19: .30 Remington 6.8 Remington SPC 09220 Number 20: .45 Colt .454 Casull 09221 Number 21: .303 Savage 09222 Number 22: 11mm Mauser 43 Spanish 09223 Number 23: .32 Harrington & Richardson Mag .32 Smith & Wesson Long .327 Federal Mag 09224 Number 24: .405 Winchester

$8.95
09225 Number 25: 8mm Nambu 09226 Number 26: 7mm x 65 Rimmed 09227 Number 27: .357 SIG .40 S & W 10mm Auto 09228 Number 28: .444 Marlin 09229 Number 29: .25 Automatic (.25 ACP) 09230 Number 30: .30 Remington AR .41 Magnum 09231 Number 31: .450 x .400 Express 3 (.400 Jeffery) .45-75 Winchester .50-70 Government .50-90-2 1/2 Sharps Straight .50-95 Winchester (Express) .56-50 Spencer 09232 Number 32: 22 PPC 6mm PPC .264 LBC-AR 7.62mm x 39 09233 Number 33: .50 Action Express 09234 Number 34: 6.5mm x 68S 8mm x 68S Magnum 99235 Number 35: .38-40 Winchester .44-40 Winchester .45 Schoeld 99236 Number 36: .45 Winchester Magnum 99237 Number 37: .416 Rigby .450 Rigby Rimless .500 Jeffery 99238 Number 38: 7mm Remington Short Action Ultra Magnum 7mm Remington Ultra Magnum .300 Remington Short Action Ultra Magnum .300 Remington Ultra Magnum .338 Remington Ultra Magnum .375 Remington Ultra Magnum .455 Webley 99239 Number 39: .38 Super (ACP) 99240 Number 40: .475 Linebaugh 1.400 .480 Ruger 99241 Number 41: .404 Jeffery 99242 Number 42: .376 Steyr 99243 Number 43: .223 Winchester Super Short Magnum .243 Winchester Super Short Magnum .25 Winchester Super Short Magnum .270 Winchester Short Magnum 7mm Winchester Short Magnum .300 Winchester Short Magnum .325 Winchester Short Magnum 99244 Number 44: .338 Marlin Express .500 Smith & Wesson 99245 Number 45: 5.7mm x 28 (FN) 99246 Number 46: .470 Nitro Express 3-1/4 .500 Nitro Express 3 99247 Number 47: .408 Chey Tac .505 Gibbs 99248 Number 48: .338 Norma Mag 99249 NEW Number 49: .40-60 Winchester - .408 *** .40-60 Winchester ***

86046 Little Dandy Rotor Knob

LITTLE DANDY ROTOR CHARGE TABLE

Shell Holder Rack

Do you keep all of your shell holders rolling around in one box? Have you ever had trouble nding the shell holder you need? With RCBSs Shell Holder Rack, you can keep your shell holders organized and protected. The Shell Holder Rack has twelve positions that hold two shell holders on each post. There is also room to store six Trim Pro Shell Holders as well. The clear cover keeps out the dust and dirt while allowing you to see what is stored in the rack. The Shell Holder Rack can be mounted on the wall or used on the bench. The wall mount spacing allows it to be hung off of standard 1 pegboard hooks as well. The support legs angle the bottom out for wall mounting or the top up for bench use. Additional Shell Holder Racks can be snapped together if more shell holder storage is needed. 9461 Shell Holder Rack 5-STATION SHELL PLATES
Plate Size Part Number Plate Size

$15.95
$38.95
Part Number

*Shoulder angle of improved version. **Some Browning, DWM, Lapua, Norma, RWS and SAKO cases require an RCBS #26 Shell Holder. *** For Ten-X brass. NOTE: If cartridge is not listed, consult the RCBS Special Order Catalog for appropriate shell holder.

AUTO 4X4 SHELL PLATES

Plate Size

$41.95
Part Number

EXTENDED SHELL HOLDERS

Part #

$12.95
10 18 45
#

WARNING: The powder charge weights shown for individual rotors are to be used for general references only. Lot to lot variations in powder density, temperature, humidity, operating techniques and manufacturing tolerance all introduce variations in charge weights from the values listed. Each rotor-powder combination used MUST be checked on an accurate scale to determine actual charge weight prior to loading ammunition. Read and follow your powder measure instructions.

Number 1 Number 2 Number 3 Number 4 Number 6 Number 7 Number 9 Number 10 Number 11 Number 12 Number 15 Number 16 Number 17

Part Number

87601 87602 87603 87604 87606 87607 87609 87610 87611 87612 87615 87616 87617

Number 18 Number 19 Number 20 Number 21 Number 23 Number 24 Number 25 Number 26 Number 27 Number 28 Number 30 Number 32 Number 45

Plate Size

87618 87619 87620 87621 87623 87624 87625 87626 87627 87628 87630 87632 88845

08952 08953 08956

2 3 6

Part #

08960 08968 08995

Number 1 Number 2 Number 3 Number 4 Number 5 Number 6 Number 7 Number 8 Number 9 Number 10 Number 11 Number 12 Number 13 Number 14 Number 15 Number 16 Number 17 Number 18 Number 19 Number 20 Number 21 Number 22

88801 88802 88803 88804 88805 88806 88807 88808 88809 88810 88811 88812 88813 88814 88815 88816 88817 88818 88819 88820 88821 88822

Number 23 Number 24 Number 25 Number 26 Number 27 Number 28 Number 30 Number 31 Number 32 Number 33 Number 34 Number 35 Number 36 Number 37 Number 38 Number 39 Number 40 Number 41 Number 42 Number 43 Number 44 Number 45

88823 88824 88825 88826 88827 88828 88830 88831 88832 88833 88834 88835 88836 88837 88838 88839 88840 88841 88842 88843 88844 88845

For Pro 2000, AmmoMaster Auto, Piggyback, Piggyback II and Piggyback3/4 Progressive Presses See Reference Chart on page 34 NOTE: The Piggyback, Piggyback II and Piggyback3 Progressive Presses are restricted to an overall cartridge length of 2.260. Check cartridge length before ordering Shell Plates.

For Auto 4x4 and 4x4 Presses See Reference Chart on page 34

REFERENCE CHART
Caliber
.17 Remington .17 Remington Fireball .204 Ruger .218 Bee .22 Bench Rest .22 PPC .22 Hornet .22 K-Hornet .22 Remington Jet .22 Savage High-Power .22-250 Remington (22 Varminter) .220 Swift .221 Remington Fireball .222 Remington .222 Remington Magnum .223 Remington (5.56mm) .223 Winchester Super Short Mag 5.6mm x 50 Rimmed 5.7mm x 28 (FN) .240 Weatherby Magnum .243 Winchester Super Short Mag .243 Winchester 6mm Bench Rest 6mm PPC 6mm x 45 6mm Remington (244 Remington) .25 Auto (25 ACP) .25 Winchester Super Short Mag .25-06 .25-20 Winchester .25-35 Winchester .250 Savage (250-3000 Savage) .257 Roberts .257 Roberts Improved 40 .257 Weatherby Magnum .260 Remington .264 LBC-AR .264 Winchester Magnum 6.5 Remington Magnum 6.5mm-06 6.5-284 Winchester 6.5 Creedmoor 6.5mm x 47 Lapua 6.5 x 54 Mannlicher-Schoenauer 6.5mm x 55 Swedish Mauser 6.5mm x 57 Mauser 6.5mm x 68S 6.8 Remington SPC .270 Weatherby Magnum .270 Winchester .270 Winchester Short Magnum .280 Remington (7mm Exp. Rem.) .284 Winchester 7mm Bench Rest Remington 7mm Remington Magnum 7mm Remington SA Ultra Magnum 7mm Remington Ultra Magnum 7mm Shooting Times Westerner 7mm Thompson/Center Ugalde 7mm Weatherby Magnum 7mm Winchester Short Magnum 7mm-08 Remington 7mm x 57 Mauser (7mm Mauser) 7mm x 64 Brenneke 7mm x 65 Rimmed 7-30 Waters .30 M-1 Carbine .30 Luger (7.65mm Luger) .30 Mauser (7.63mm Mauser) .30 Remington .30 Remington AR .30 T/C .30-06 Springeld .30-30 Winchester .30-338 Winchester Magnum .30-378 Weatherby Magnum .30-40 Krag .300 H&H Magnum .300 Remington SA Ultra Magnum .300 Remington Ultra Magnum .300 RCM .300 Savage .300 Weatherby Magnum .300 Winchester Magnum .300 Winchester Short Magnum .303 British .307 Winchester .308 Norma Magnum .308 Winchester .308 Marlin Express 7.5mm x 54 French MAS 7.5mm x 55 Schmidt-Rubin 7.62mm x 39-.308/.311 7.62mm x 54R Russian 7.65mm x 53 Belgian Mauser 7.7mm x 58 Japanese Arisaka .32 Automatic (7.65mm Auto) .32 H&R Magnum .32 Smith & Wesson Long .327 Federal Magnum .32 Winchester Special

REFERENCE CHART
Die Group
A & GM A & GM A, GM & AR A GM GM A & GM D D D A & GM A & GM A & GM A & GM A A, GM & AR A & GM D D A A & GM A & GM GM A & GM D & AR A & GM E A & GM A & GM A A A A D A A, GM & AR D & AR A D D D & GM D & AR D & GM D A & GM D D A & AR A A & GM A & GM A & GM A D & GM A & GM A & GM A & GM A & GM A & GM A A & GM A & GM A & GM A D A & GM C A D D D & AR A A, GM & AR A D A & GM A D A & GM A & GM A A A & GM A & GM A & GM A A D A, GM & AR A D A A & AR A A A B E E E A

Gold Medal Match Dies

Die Group
E D A D A D A A & AR A & GM A A D A D D A A D A A D B A B B A A E B B E B B D A D A A A C D D E COWBOY B B E LEGACY & COWBOY B D LEGACY LEGACY LEGACY SAFARI LEGACY B B D D D 1 1/2"-12 B COWBOY B C B B B B B COWBOY LEGACY C & COWBOY LEGACY LEGACY LEGACY LEGACY LEGACY C SAFARI SAFARI B C C D B 1 1/2"-12 SAFARI B B B LEGACY LEGACY LEGACY B SAFARI SAFARI LEGACY 1 1/2"-12 SAFARI

Shell Holder & Shell Plate No.

10 10 10 1 3 32 12 12 6 2 3 11 10 10 10 10 43 (5) 6 45 3 43 (5) 3 3 32 10 3 29 (6) 43 (5) 3 1 2 3 3/11 3/11 4 3 32 4/26 4/26 3 3 3 3 9 2 3 34 (5) 19 4 3 43 (5) 3 3 3 4/26 38/4 (5) 38/4 (5) 4 10 4 43 (5) 3 3/11 3 26 2 17 16 16 19 30 3 3 2 4 14 (5) 7 4 38/4 (5) 38/4 (5) 4 3 4 4/26 43 (5) 7 2 4 3 2 2 2 32 13 (5) 3 3/2 17 23 23 23 2

Primer Plug & Sleeve Size

Small Small Small Small Small Small Small Small Small Large Large Large Small Small Small Small Large Small Small Large Large Large Small Small Small Large Small Large Large Small Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large (2) Large Large Large Large Large Large Small Large Large Large Large Small Large Large Large Large Large Large Large Small Small Small Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Small Small Small Small Large

Case Trimmer Collet No.*

1 1 1 2 3 3 2 2 3 2 1 1 1 1 1 1 1 2 (4) 1 1 1 3 3 1 1 (4) 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 2 2 2 2 1 1 2 1 4 3 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 3 4 1 1 1 1 1 1 2

Case Trimmer Pilot Cal.

17 17 20 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 24 24 24 24 24 24 24 (4) 25 25 25 25 25 25 25 25 26 26 26 26 26 26 26 26 26 26 26 26 27 27 27 27 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 30 30 30 30 30 30 30/31 30 31 31 31 31 31 31 32

Ammo Box Size

SR SR SR MP MR MR MP MP MP MR MR MR SR SR SR SR (4) SR SR/MP LR (4) MR MR MR SR MR (4) (4) LR MP MR MR MR MR LR MR MR LR LR LR LR LR MR LR LR LR LR MR LR LR (4) LR MR MR LR (4) (4) LR SR LR (4) MR LR LR LR MR MP (4) (4) MR MR MR LR MR LR (4) LR LR (4) (4) MR MR LR LR (4) LR MR LR MR MR LR LR MR LR LR LR (4) (4) (4) (4) MR

Lube Die
1 1 3 2 3 1 1 1 1 2 2 2 1 1 1 2 2 3 2 2 2 4 2 3 4 4 2 4 4 3 2 2 4 3 4 2 2 4 2 4 4 1 4 2 2 2 2 3 3 3 2 2 3 4 4 2 2 4 4 2 4 2 2 2 3 2 2 3

Caliber
.32-20 Winchester .32-40 Winchester 8mm Remington Magnum 8mm-06 8mm x 57 Mauser (8mm Mauser) 8mm x 68S Magnum .325 Winchester Short Magnum .338 Federal .338 Lapua .338 Remington Ultra Magnum .338 RCM .338 Marlin Express .338 Winchester Magnum .338-06/.338-06 A-Square .338 Norma Mag .338-378 Weatherby Magnum .340 Weatherby Magnum .348 Winchester .35 Remington .35 Whelen .350 Remington Magnum .356 TSW .356 Winchester .357 Magnum .357 Remington Maximum .357 Sig .358 Winchester 9mm FAR 9mm x 18 Ultra 9mm Luger 9mm Makarov 9mm x 21 9mm x 23 Winchester .370 Sako Magnum/9.3x66 Sako 9.3mm x 62 Mauser 9.3mm x 74R .375 H&H Magnum .375 Remington Ultra Mag .375 Ruger .375 Winchester .376 Steyr .378 Weatherby Magnum .38 Colt Super Auto (.38 ACP) .38 Smith & Wesson .38 Special .380 Automatic Pistol .38-40 Winchester .38-55 Winchester & Ballard .40 S&W .400 CorBon .40-60 Winchester - .408" .40-65 Shiloh Sharps - .408" .40-70-2 1/2" Sharps Straight .404 Jeffery .405 Winchester 10mm Auto .41 Magnum .416 Ruger .416 Remington Magnum .416 Rigby .416 Barrett .44 Magnum .44 S&W Russian .44 Special .444 Marlin .44-40 Winchester .45 Automatic (45 ACP) .45 Auto Rim .45 Glock Action Pistol .45 Colt .45 S&W Schoeld .45-60 Winchester .45-70 U.S. Government .45-75 Winchester .45-90-2.4" Sharps Straight .45-100-2.6" Sharps Straight .45-110-2 7/8" Sharps Straight .45-120-3 1/4" Sharps Straight .450 Marlin .450x.400 Express 3" (.400 Jeffery) .450 Rigby Rimless .454 Casull .458 Winchester Magnum .458 Lott .460 Weatherby Magnum .460 Smith & Wesson .460 Steyr .470 Nitro Express 3 1/4" .475 Linebaugh 1.400" .480 Ruger .50 Action Express .50-70 Gov't .50-90-2 1/2" Sharps Straight .50-95 Winchester (Express) .500 Smith & Wesson .500 Jeffery .500 Nitro Express .56-50 Spencer .50 BMG .505 Gibbs

Shell Holder & Shell Plate No.

1 2 4 3 3 34 (5) 43 (5) 3 14/37 (6) 38/4 (5) 4 44 4 3 48 14 4 5 (5) 9 3 4 16 2 6 6 27 3 16 10 16 16 16 16 3 3 4 4 38/4 (5) 4 2 42 14 (5) 39 6 6 10 35 (5) 2 27 3 49 (6) 14 (5) 14 (5) 41 (5) 24 27 30 4 4 37 (5) .50 BMG 18 18 18 28 35 (5) 3 8 3 20 35 49 (6) 14 (6) 31 (5) 14 (5) 14 (5) 14 (5) 14 (5) 4 31 (5) 37 (5) 20 4 4 14 (5) 4 .50 BMG 46 (6) 40 (5) 40 (5) 33 (5) 31 (5) 31 (5) 31 (5) 44 (5) 37 (5) 46 (6) 31 (5) .50 BMG 47 (6)

Primer Plug & Sleeve Size

Small Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Small Large Small Small Small Large Small Small Small Small Small Small Large Large (2) Large Large Large Large Large Large Large Small Small Small Small Large Large Small Large Large Large Large Large Large Large Large Large Large Large .50 BMG Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large .50 BMG Large Large Large Large Large Large Large Large Large Large Large .50 BMG Large

Case Trimmer Collet No.*

2 2 1 1 1 2 1 1 4 1 1 1 1 4 1 4 1 1 1 2 2 3 3 3 1 2 2 2 2 2 2 1 1 1 1 1 2 2 2 4 2 3 3 1 1 2 3 1 4 4 4 HC#2 3 3 2 1 1 4 .50 BMG 2 2 2 1 1 1 1 1 1 1 4 4 4 4 4 4 4 1 .50 BMG HC#2 1 1 1 4 .50 BMG HC#1 1 1 1 4 4 4 HC#1 HC#1 .50 BMG .50 BMG

Case Trimmer Pilot Cal.

31 32 32 32 32 32 32 33 33 33 33 33 33 33 33 33 33 34 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 36 36 36 37 37 37 37 37 37 35 35 35 35 40 37 40 40 41 41 41 40 40 41 416 416 416 416 44 44 44 44 44 45 45 45 45 45 45-R 45-R 45-R 45-R 45-R 45-R 45-R 45-R 41 45-R 45 45-R 45-R 45-R 45 45-R 475 475 475 50 50 50 50 50 50-R 50-R 50 50-R 50-R

Ammo Box Size

MP MR LR LR LR LR LR MR (4) (4) MR LR LR LR LR (4) LR MR MR LR MR (4) MR MP SR LP MR MP (4) (4) (4) (4) (4) LR LR LR LR (4) MR MR LR (4) MP MP MP (4) LP MR LP LP (4) (4) (4) (4) (4) LP LP LR LR (4) (4) LP LP LP LR LP LP LP LP LP LP (4) (4) (4) (4) (4) (4) (4) LR (4) (4) (4) LR LR (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4)

Lube Die
3 4 2 2 2 2 2 2 4 3 2 4 2 2 2 4 3 3 4 3 2 4 4 4 3 4 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4

RCBS is proud of the Gold Medal series of neck bushing rie dies. This changeable diameter neck bushing die has been used by benchrest and long-range precision shooters for years. The Gold Medal sizing dies feature a self-centering changeable neck bushing that allows you to precisely set the amount of tension on the bullet. Gold Medal rie dies are available in full-length and neck sizing styles. The Gold Medal seat dies feature a micrometer adjustable, free oating and self-centering bullet seating system with a convenient bullet-loading window.

RCBS 2-Die Sets Groups A, D & Safari

2-Die Sets are for bottleneck type rie and pistol cases, and consist of a Full-Length Sizer Die with Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.

Precisioneered Dies
At RCBS we have over 60 years of precision die making under our belt. And the industrys most experienced die craftsmen working under our roof These craftsmen, following rigid RCBS specications developed over many years, produce more reloading dies in more calibers (over 3,300!) than any other reloading die manufacturer. RCBS Precisioneered Reloading Dies are for shooters who demand reloads equal to the quality of their guns. Each RCBS Die is made from case hardened steel. The inside surfaces of all RCBS Precisioneered Dies are precisiondrilled and reamed to the same exacting standards as the nest gun mechanisms. Full-Length Sizer Dies for bottleneck cases have vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. Each RCBS Die is properly hardened and hand polished. This special RCBS nishing produces a die that will withstand years and years of the abrasive type of wear caused by case sizing. All RCBS Seater Dies have a built-in roll or taper crimper as appropriate for the particular caliber. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth. Large, easy-to-adjust hex lock rings utilize hex head setscrews. Unless otherwise noted, all RCBS Precisioneered Dies have the standard 7/8-14 thread. Dies are packaged in stackable, plastic storage boxes specially designed to protect the dies in shipping. Includes loading data label.

RCBS Neck Die Sets Groups A & D

Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet. Neck Die Sets consist of a Neck Sizer Die with Expander-Decapping Unit and a regular Seater Die with Seater Plug. Neck Sizer Dies are also available individually. Available in most calibers. See listings on the following pages.

RCBS Small Base Die Sets Group A

Small Base Sizer Dies are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever-action ries. These dies size the body of cases somewhat smaller in diameter and also set the shoulder back slightly more than a Full-Length Sizer Die to ensure proper functioning in the actions of these ries. Not recommended for ammunition used in bolt-action ries. Small Base Set contains Small Base Sizer with Expander-Decapping Unit and Regular Seater Die with Seater Plug. Small Base Sizer Dies also available individually. Available in many calibers. See listings on the following pages.

RCBS Tungsten Carbide Die Sets Groups B, C, & E

The Carbide Sizer Die eliminates the need for case lubrication and cases do not need to be cleaned before sizing. Carbide Die Sets consist of a Carbide Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth, plus a Seater Die with Roll or Taper Crimp and Bullet Seater Plug. Carbide Sizer Dies are also available separately. Available in most popular handgun calibers and .30 M-1 Carbine. See die listings for caliber availability. NOTE: Due to the length of the 30 M-1 Carbine Carbide insert, every fourth or fth case should be lightly lubricated to eliminate sticking cases.

RCBS 3-Die Sets Groups B, C, E, Legacy & Safari

RCBS pioneered and developed the 3-Die Sets for straight-wall rie and pistol cases. In the 3-Die Set sizing and expanding (belling) are done in separate dies. The 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die with Roll or Taper Crimp and Bullet Seater Plug(s) for seating and crimping the bullet.

AR Series Dies
The new RCBS AR Series is a must for the progressive reloader. It features a Small Base sizing die and a new Taper Crimp seating die. This combination makes reloading easier for AR-style or semiauto shooters. The Small Base sizer guarantees that the cartridge will rechamber. The Taper Crimp Seater is more forgiving when various case lengths are loaded at the same time. Case neck crimp bulges and buckled shoulders are virtually eliminated when Taper crimping is used with cannelured bullets.

Special Order Die Sets

If you cannot nd your dies listed on the reference chart on page 36 of this catalog, please consult the RCBS Special Order catalog. See charts on following pages for part numbers.

IMPORTANT: RCBS Shell Holder numbers do not correspond to those of other manufacturers. When two Shell Holder are listed, the most popular is shown rst. It may be necessary to use the alternate, depending on the manufacturer and/or lot of cases being used. The numerals in ( ) in the table indicate the following: (2) cases are usually Berdan primed. Depriming and priming must be done by hand. If cases were formed from cases having boxer-type primers, use the appropriate Shell Holder for that caliber. (4) not available. (5) Auto 4X4 Shell Plate not available. (6) Auto 4X4 and Five-Station Shell Plates not available. Ammo Box size code: SR=Small Rie, MR=Medium Rie, LR=Large Rie, MP=Medium Pistol, LP=Large Pistol. * Rotary Case Trimmer2 only. ** For Ten-X brass.

Competition Rie Dies

Decap Rod Lock Nut Guide Bushing Lock Nut Die Body Thimble

Micrometer Graduations Die Body Bullet Seat Plug Bullet Loading Window Case/Bullet Guide

These dies arent for everybody. They go above and beyond our Precision Dies. If youre a competitive marksman measuring success in fractions of a millimeter, RCBS Competition Dies are for you. NOTE: Competition dies do not require neck bushings. COMPETITION DIES
Competition Full-Length Die Set $127.95 Competition Competition Competition Extended Seater Full-Length Shell Holder Die Sizer Die $13.95 $82.95 $49.95 Decapping Pin $2.95 Competition Seater Plug Assembly $12.95 Competition Bullet Guide $7.95

Competition Rie Two Die Sets

FEATURES & BENEFITS Full-length sizer with a raised expander ball allowing extra leverage for smooth, effortless neck expansion Maximum concentricity between die neck and body Seater die with micrometer for super accurate bullet seating depth in increments of 0.001 Bullet inserts through a side window instead of bottom of die Special bullet-seating guide ensures correct bullet alignment before and after seating. Extended shell holder for shorter cartridges Black oxide nish Not for use with progressive reloading presses

Caliber

Neck Bushing

Decap Pin Holder Decap Pin

Bullet Retainer

.204 RUGER .22 HORNET .222 REM .223 REM .22-250 REM .243 WIN .25-06 6.5MMX55 SWEDISH MAUSER .270 WIN 7MM-08 REM 7MM REM MAG 7MMX64 BRENNEKE 7.5MMX55 SCHMIDT-RUBIN .30-06 SPRINGFIELD .308 WIN 8MMX57 MAUSER

39401+ 38301+ 37001+ 37201+ 37101+ 37301+ 39501 38401+ 37501 37401+ 37601 38501 38601 37701 37801+ 38701

39429 38329 37029 37229 37129 37329 39529 38429 37529 37429 37629 38529 38629 37729 37829 38729

39438+ 38338+ 37038+ 37238+ 37138+ 37338+ 39538 38438+ 37538 37438+ 37638 38538 38638 37738 37838+ 38738

38260 38262 38260 38260 38253 38253 38252 38253 38253

9608 9608 9608 9608 9608 9609 9609 9609 9609 9609 9609 9609 9609 9609 9609

38150 38151 38151 38151 38151 38152 38153 38154 38155 38156 38156 38156 38157 38157 38157 38159

38201 38202 38202 38202 38202 38205 38206 38207 38208 38209 38209 38209 38212 38212 38212 38214

+Competition extended shell holder required for bullet seating is included. * Current O ring style only.

RCBS Gold Medal Match Series Dies

RCBS is proud to introduce the Gold Medal series of neck bushing rie dies. This changeable diameter neck bushing type of die has been used by Bench Rest and Long Range Precision shooters for years. Due to variability in neck brass thickness, RCBS standard dies size the neck below your desired diameter and then pull an expander ball through to get the proper bullet tension. The Gold Medal sizing die features a self-centering, changeable neck bushing that allows you to precisely set the amount of tension on the bullet. This reduces work hardening of the case neck brass, prolonging case life and increasing accuracy. Neck bushings are available in .001 increments from .189 to .365. The Gold Medal rie dies are available in Full-Length and Neck sizing styles. By removing the neck bushing, the Full Length sizing die can be used as a bump die to set headspace back the desired amount. Neck bushings are not included. Proper neck bushing size can be determined two ways. Measure the outside neck diameter of your loaded cartridge, subtract .002 to .003. This allows approximately .001 of brass spring back for correct neck tension. The other is to measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .001. RCBS suggests that you have neck bushings one to two sizes above and below your target diameter. The Gold Medal seat dies features a micrometer adjustable, free oating and self centering bullet seating system with a convenient bullet loading window. The Gold Medal seat die can also be used on progressive presses with the exception of the .221 Rem Fireball, .17 Rem Fireball and .22 Hornet cartridges.

GOLD MEDAL MATCH

Full Length Neck Bushing Die Set $169.95
16205 17205 10305 10205 29905 28805 10605 10705 10805 10905 11105 10505 11605 11405 16105 22605 11505 12405 12005 28705 13205 12905 12805 13505 31305 14005 13605 31105 17805 26605 34205 31405 13905 34105 13805 34805 15505 14805 30805 31205 17605 15205 15305 29505 16605

STEEL NECK BUSHINGS

Full Length Neck Bushing Sizer Die $63.95
16234 17234 10334 10234 29934 28834 10634 10734 10834 10934 11134 10534 11634 11434 16134 22634 11534 12434 12034 28734 13234 12934 12834 13534 31334 14034 13634 31134 17834 26634 34234 31434 13934 34134 13834 34834 15534 14834 30834 31234 17634 15234 15334 29534 16634

$14.95
Part Number Neck Bushing Diameter Part Number Neck Bushing Diameter Part Number

COATED NECK BUSHINGS

Neck Bushing Diameter Part Number Neck Bushing Diameter Part Number Neck Bushing Diameter Part Number Neck Bushing Diameter

$25.95
Part Number

Caliber
.17 REM FIREBALL* .17 REM .204 RUGER .22 HORNET* .22 BENCH REST .22 PPC .22-250 REM (.22 VAR.) .220 SWIFT .221 REM FIREBALL* .222 REM .223 REM (5.56MM) .223 WSSM .243 WSSM .243 WIN 6MM BENCH REST 6MM PPC 6MM REM (.244 REM) .25 WSSM .25-06 6.5MM-.284 WINCHESTER 6.5X55 SWEDISH MAUSER 6.5X47 LAPUA .260 REM .270 WIN .270 WIN SHORT MAG .280 REM 7MM REM MAG 7MM REM SA ULTRA MAG 7MM REM ULTRA MAG 7MM STW 7MM T/CU 7MM WIN SHORT MAG 7MM-08 REM 7MM BENCH REST 7X57 MAUSER (7MM MAUSER) 7-30 WATERS .308 WINCHESTER .30-06 SPRINGFIELD .300 WSM .300 REM SA ULTRA MAG .300 REM ULTRA MAG .300 WBY MAG .300 WIN MAG .30-378 WBY MAG .338 LAPUA

Neck Bushing Die Set $169.95

16206 17206 10306 10206 29906 28806 10606 10706 10806 10906 11106 10506 11606 11406 16106 22606 11506 12406 12006 28706 13206 12906 12806 13506 31306 14006 13606 31106 17806 26606 34206 31406 13906 34106 13806 34806 15506 14806 30806 31206 17606 15206 15306 29506 16606

Neck Bushing Sizer Die $63.95

16235 17235 10335 10235 29935 28835 10635 10735 10835 10935 11135 10535 11635 11435 16135 22635 11535 12435 12035 28735 13235 12935 12835 13535 31335 14035 13635 31135 17835 26635 34235 31435 13935 34135 13835 34835 15535 14835 30835 31235 17635 15235 15335 29535 16635

Gold Medal Seater Die $117.95

16249 17249 10349 10249 29949 28849 10649 10749 10849 10949 11149 10549 11649 11449 16149 22649 11549 12449 12049 28749 13249 12949 12849 13549 31349 14049 13649 31149 17849 26649 34249 31449 13949 34149 13849 34849 15549 14849 30849 31249 17649 15249 15349 29549 16649

Decap Unit $8.95

9882 9882 9801 9802 9802 9802 9802 9802 9802 9802 9805 9805 9805 9806 9806 9807 9808 9808 9808 9809 9809 9809 9809 9809 9809 9809 9809 9809 9809 9812 9812 9812 9812 9812 9812 9812 9812 9818

Neck Bushing Diameter

Part Number

Neck Bushing Diameter

* Competition extended shell holder required for bullet seating is included. NOTE: If not in stock, allow 4-6 weeks for delivery.

0.185 0.186 0.187 0.188 0.189 0.190 0.191 0.192 0.193 0.194 0.195 0.196 0.197 0.198 0.199 0.200 0.201 0.202 0.203 0.204 0.205 0.206 0.207 0.208 0.209 0.210 0.211 0.212 0.213 0.214 0.215 0.216 0.217 0.218 0.219 0.220 0.221 0.222 0.223 0.224 0.225 0.226 0.227 0.228 0.229 0.230

81500 81501 81502 81503 81504 81505 81506 81507 81508 81509 81510 81511 81512 81513 81514 81515 81516 81517 81518 81519 81520 81521 81522 81523 81524 81525 81526 81527 81528 81529 81530 81531 81532 81533 81534 81535 81536 81537 81538 81539 81540 81541 81542 81543 81544 81545

0.231 0.232 0.233 0.234 0.235 0.236 0.237 0.238 0.239 0.240 0.241 0.242 0.243 0.244 0.245 0.246 0.247 0.248 0.249 0.250 0.251 0.252 0.253 0.254 0.255 0.256 0.257 0.258 0.259 0.260 0.261 0.262 0.263 0.264 0.265 0.266 0.267 0.268 0.269 0.270 0.271 0.272 0.273 0.274 0.275 0.276

81546 81547 81548 81549 81550 81551 81552 81553 81554 81555 81556 81557 81558 81559 81560 81561 81562 81563 81564 81565 81566 81567 81568 81569 81570 81571 81572 81573 81574 81575 81576 81577 81578 81579 81580 81581 81582 81583 81584 81585 81586 81587 81588 81589 81590 81591

0.277 0.278 0.279 0.280 0.281 0.282 0.283 0.284 0.285 0.286 0.287 0.288 0.289 0.290 0.291 0.292 0.293 0.294 0.295 0.296 0.297 0.298 0.299 0.300 0.301 0.302 0.303 0.304 0.305 0.306 0.307 0.308 0.309 0.310 0.311 0.312 0.313 0.314 0.315 0.316 0.317 0.318 0.319 0.320 0.321 0.322

81592 81593 81594 81595 81596 81597 81598 81599 81600 81601 81602 81603 81604 81605 81606 81607 81608 81609 81610 81611 81612 81613 81614 81615 81616 81617 81618 81619 81620 81621 81622 81623 81624 81625 81626 81627 81628 81629 81630 81631 81632 81633 81634 81635 81636 81637

0.323 0.324 0.325 0.326 0.327 0.328 0.329 0.330 0.331 0.332 0.333 0.334 0.335 0.336 0.337 0.338 0.339 0.340 0.341 0.342 0.343 0.344 0.345 0.346 0.347 0.348 0.349 0.350 0.351 0.352 0.353 0.354 0.355 0.356 0.357 0.358 0.359 0.360 0.361 0.362 0.363 0.364 0.365

81638 81639 81640 81641 81642 81643 81644 81645 81646 81647 81648 81649 81650 81651 81652 81653 81654 81655 81656 81657 81658 81659 81660 81661 81662 81663 81664 81665 81666 81667 81668 81669 81670 81671 81672 81673 81674 81675 81676 81677 81678 81679 81680

0.185 0.186 0.187 0.188 0.189 0.190 0.191 0.192 0.193 0.194 0.195 0.196 0.197 0.198 0.199 0.200 0.201 0.202 0.203 0.204 0.205 0.206 0.207 0.208 0.209 0.210 0.211 0.212 0.213 0.214 0.215 0.216 0.217 0.218 0.219 0.220 0.221 0.222 0.223 0.224 0.225 0.226 0.227 0.228 0.229 0.230

81700 81701 81702 81703 81704 81705 81706 81707 81708 81709 81710 81711 81712 81713 81714 81715 81716 81717 81718 81719 81720 81721 81722 81723 81724 81725 81726 81727 81728 81729 81730 81731 81732 81733 81734 81735 81736 81737 81738 81739 81740 81741 81742 81743 81744 81745

0.231 0.232 0.233 0.234 0.235 0.236 0.237 0.238 0.239 0.240 0.241 0.242 0.243 0.244 0.245 0.246 0.247 0.248 0.249 0.250 0.251 0.252 0.253 0.254 0.255 0.256 0.257 0.258 0.259 0.260 0.261 0.262 0.263 0.264 0.265 0.266 0.267 0.268 0.269 0.270 0.271 0.272 0.273 0.274 0.275 0.276

81746 81747 81748 81749 81750 81751 81752 81753 81754 81755 81756 81757 81758 81759 81760 81761 81762 81763 81764 81765 81766 81767 81768 81769 81770 81771 81772 81773 81774 81775 81776 81777 81778 81779 81780 81781 81782 81783 81784 81785 81786 81787 81788 81789 81790 81791

0.277 0.278 0.279 0.280 0.281 0.282 0.283 0.284 0.285 0.286 0.287 0.288 0.289 0.290 0.291 0.292 0.293 0.294 0.295 0.296 0.297 0.298 0.299 0.300 0.301 0.302 0.303 0.304 0.305 0.306 0.307 0.308 0.309 0.310 0.311 0.312 0.313 0.314 0.315 0.316 0.317 0.318 0.319 0.320 0.321 0.322

81792 81793 81794 81795 81796 81797 81798 81799 81800 81801 81802 81803 81804 81805 81806 81807 81808 81809 81810 81811 81812 81813 81814 81815 81816 81817 81818 81819 81820 81821 81822 81823 81824 81825 81826 81827 81828 81829 81830 81831 81832 81833 81834 81835 81836 81837

0.323 0.324 0.325 0.326 0.327 0.328 0.329 0.330 0.331 0.332 0.333 0.334 0.335 0.336 0.337 0.338 0.339 0.340 0.341 0.342 0.343 0.344 0.345 0.346 0.347 0.348 0.349 0.350 0.351 0.352 0.353 0.354 0.355 0.356 0.357 0.358 0.359 0.360 0.361 0.362 0.363 0.364 0.365

81838 81839 81840 81841 81842 81843 81844 81845 81846 81847 81848 81849 81850 81851 81852 81853 81854 81855 81856 81857 81858 81859 81860 81861 81862 81863 81864 81865 81866 81867 81868 81869 81870 81871 81872 81873 81874 81875 81876 81877 81878 81879 81880

GROUP A
Caliber Full-Length Die Set $41.95 Full-Length Sizer Die $34.95 Neck Die Set $45.95 $64.95* Neck Sizer Die $37.95 $44.95* Small Base Die Set $45.95 $64.95* Small Base Sizer Die $37.95 $44.95* Seater Die $29.95 Exp-Decap Unit $8.95 Trim Die $40.95

GROUP B
Caliber 3-Die Carbide Roll Crimp Set $61.95 3-Die Carbide Taper Crimp Set $61.95 3-Die Roll Crimp Set $46.95 3-Die Taper Crimp Set $46.95 Carbide Sizer Die $44.95 Steel Sizer Die $25.95 Expander Die $17.95 Roll Crimp Seater Die $23.95 Taper Crimp Seater Die $23.95 Decap Unit $8.95 Trim Die $41.95

.17 REM .17 REM FIREBALL .204 RUGER .218 BEE .22 HORNET .22-250 REM (.22 VAR.) .220 SWIFT .221 REM FIREBALL .222 REM .222 REM MAG .223 REM (5.56MM) .223 WSSM .240 WBY MAG .243 WIN .243 WSSM 6MM REM (.244 REM) 6MM PPC .25-06 .25 WSSM .25-20 WIN .25-35 WIN .250 SAV (.250-3000 SAVAGE) .257 ROBERTS .257 WBY MAG .260 REM .264 WIN MAG 6.5X55 SWEDISH MAUSER 6.8 REMINGTON SPC .270 WBY MAG .270 WIN .270 WIN SHORT MAG .280 REM (7MM EXP REM) .284 WIN 7MM REM MAG 7MM REM SA ULTRA MAG 7MM REM ULTRA MAG 7MM STW 7MM T/CU 7MM WBY MAG 7MM WIN SHORT MAG 7MM-08 REM 7X57 MAUSER (7MM MAUSER) 7MMX64 BRENNEKE 7-30 WATERS 7.5MM SCH-RUBIN (1911) 7.62X54R RUSSIAN 7.62MMX39-.308/311 7.65MMX53 BELGIUM MAUSER 7.7MMX58 JAPANESE ARISAKA .30 LUGER (7.65MM LUGER) .30 T/C .30-06 SPRINGFIELD .30-30 WIN .30-378 WBY MAG .30-40 KRAG .300 RCM .300 REM SA ULTRA MAG .300 REM ULTRA MAG .300 SAVAGE .300 WBY MAG .300 WIN MAG .300 WIN SHORT MAG .303 BRITISH .308 MARLIN EXPRESS .308 WIN / .307 WIN 8MMX57 MAUSER (8MM MSR) 8MM REM MAG .32 WIN SPEC .325 WIN SHORT MAG .338 RCM .338 Marlin Express .338 FEDERAL .338 REM ULTRA MAG .338 WIN MAG .338 LAPUA .338-378 WBY MAG .340 WBY MAG .35 REM .35 WHELEN .357 SIG .358 WIN/.356 WIN 9.3MMX62 MAUSER .375 H&H MAG .375 REM ULTRA MAG .375 RUGER

17201 16201 10301 10001 10201 10601 10701 10801 10901 11001 11101 10501 33201 11401 11601 11501 22601 12001 12401 11801 12101 12201 12501 12601 12801 12701 13201 13301 13401 13501 31301 14001 14101 13601 31101 17801 26601 34201 13701 31401 13901 13801 34001 34801 33501 29001 35001 14301 14401 25001 25201 14801 14601 29501 14701 26901 31201 17601 15101 15201 15301 30801 15401 14901 15501 15901 16001 15701 31601 27301 25401 17301 17701 16301 16601 16801 30601 16501 30701 23101 32701 34501 16901 30901 26801

17229 16229 10329 10029 10229 10629 10729 10829 10929 11029 11129 10529 33229 11429 11629 11529 22629 12029 12429 11829 12129 12229 12529 12629 12829 12729 13229 13329 13429 13529 31329 14029 14129 13629 31129 17829 26629 34229 13729 31429 13929 13829 34029 34829 33529 29029 35029 14329 14429 25029 25229 14829 14629 29529 14729 26929 31229 17629 15129 15229 15329 30829 15429 14929 15529 15929 16029 15729 31629 27329 25429 17329 17729 16329 16629 16829 30629 16529 30729 23129 32729 34529 16929 30929 26829

17202 16202 10302 10002* 10202 10602 10702 10802 10902 11002 11102 10502 33202 11402 11602 11502 22602 12002 12402 11802 12102 12502* 12602* 12802 12702* 13202 13402* 13502 31302* 14002* 14102 13602 31102* 17802 26602 34202 13702 31402* 13902 13802 34002* 34802* 33502 29002* 14302 14402 25002 14802 14602* 29502 26902 31202* 17602 15202 15302 30802* 15402 15502 15902 16002 31602 27302 17302 17702* 16302 16602 16802 30602 34502 16902* 30902* 26802

17230 16230 10330 10030 10230 10630 10730 10830 10930 11030 11130 10530 33230 11430 11630 11530 22630 12030 12430 11830 12130 12530* 12630* 12830 12730* 13230 13430* 13530 31330* 14030* 14130 13630 31130* 17830 26630 34230 13730 31430* 13930 13830 34030* 34830* 33530 29030* 14330 14430 25030 25230 14830 14630* 29530 26930 31230* 17630 15230 15330 30830* 15430 15530 15930 16030 31630 27330 25430 17330 17730* 16330 16630 16830 30630 34530 16930* 30930* 26830

10603* + 11103 11403 11503* + + 13303 13503 31303 14003* + 13603 31403 + 14803 15103* 15303 30803 14903* 15503 31603 16303* +

10631* + 11131 11431 11531* + + 13331 13531 31331 14031* + 13631 31431 + 14831 15131* 15331 30831 14931* 15531 31631 16331* +

17238 16238 10038 10238 10638 10738 10838 10938 11038 11138 33238 11438 11538 22638 12038 12438 11838 12138 12238 12538 12638 12838 12738 13238 13338 13438 13538 31338 14038 14138 13638 31138 17838 26638 34238 13738 31438 13938 13838 34038 34838 33538 29038 35038 14338 14438 25038 25238 14838 14638 29538 14738 26938 31238 17638 15138 15238 15338 30838 15438 14938 15538 15938 16038 15738 31638 27338 25438 17338 17738 16338 16638 16838 30638 16538 30738 23138 32738 34538 16938 30938 26838

9882 9882 9801 9802 9802 9802 9802 9802 9802 9802 9802 9802 9805 9805 9805 9805 9806 9806 9806 9806 9806 9806 9806 9807 9807 9807 9808 9808 9808 9808 9809 9809 9809 9809 9809 9809 9811 9809 9809 9809 9809 9809 9809 9812 *** ** 9814 9814 9813 9812 9812 9812 9812 9812 9812 9812 9812 9812 9812 9812 9812 9814 9812 9812 9817 9817 9816 9817 9828 9818 9828 9818 9818 9818 9818 9818 9820 9823 9834 9823 9821 9822 9822 9822

17265* 10065* 10265* 10665 10765 10865* 10965 11065* 11165 33265* 11465 11565 22665* 12065 11865* 12165* 12265* 12565* 12665* 12865* 12765* 13265* 13465* 13565 31365* 14065* 14165* 13665 31165* 17865* 26665* 34265* 13765* 31465* 13965* 13865 34065* 34865* 33565* 29065* 35065* 14365* 14465* 25065* 14865 14665 29565* 14765* 31265* 17665* 15165* 15265* 15365 30865* 15465* 15565 15965 16065* 15765* 17765* 16365* 16665* 16865* 30665* 16565* 30765* 23165* 32765* 34565* 16965* 30965*

.32 AUTO (1) .357 MAG/.357 REM MAX/.38 SPL 9MM LUGER/9X21/356 TSW/9X23 WIN/9X18 ULTRA .380 AUTO .40 S&W/10MM AUTO .41 MAG .44 MAG/.44 SPL .44-40 WIN (3) .44-.40 WIN JACKETED (4) .45 AUTO(ACP)/AUTO RIM/GLOCK ACT. PISTOL .45 COLT .460 S&W .454 CASULL .480 RUGER/.475 LINEBAUGH 1.400" .50 ACTION EXPRESS .500 S&W/.500 S&W SPL

18212 18512 18612 19112 24212 23212 35212 23812

20015 18215 20515 20415 22115 18915

18608 18805 18806 19108 35208 23808

22210

20037 18237 20537 20437 22137 18537 18637 18937 19137 24237 23237 35237 23837

18332 18732 18832 18832 19132 35232 22232 23832

20053 18353 20552 20449 22153 18553 18753 18853 18953 19153 24253 23253 23553 22253 23853

18342 20538 18542 18742 18839 18840 18942 19142 24238 23242 35238 23838

20062 18262 20562 20462 22162 18662 18962 22262

9622 9622 9622 9622 9622 9622 9622 9622 9622 9622 9622 9622 9622 9622 9622 9622

20065* 18265/18365 20565*/22365* 20465* 22165*/21665* 18565* 18665/18765* 18865* 18865* 18965** 19165* 23265* 35265* 22265*

*May not be available from stock. 1: For use with .311 bullets. 2: For use with .314 bullets . 3: Regular Seater Die for all lead and jacketed bullets from Hornady, Sierra and Speer. 4: Jacketed Seater Die for Remington bullets only. **Not for use with .45 Auto Rim or .45 GAP.

GROUP C
Caliber 3-Die Carbide Taper Crimp Set $84.95 3-Die Roll Crimp Set $55.95 3-Die Taper Crimp Set $55.95 Carbide Sizer Die $62.95 Steel Sizer Die $29.95 Expander Die $20.95 Roll Crimp Seater Die $26.95 Taper Crimp Seater Die $26.95 Decap Unit $8.95 Trim Die $40.95

.30 M-1 CARBINE .375 WIN .444 MARLIN .45-70 US GOV'T .450 MARLIN .458 WIN MAG .458 LOTT

18015

20604 20704 20904 35504 20804 24104

18010

18037

18032 20633 20733 20933 35533 20833 24133

18053 20658 20758 20955 35558 20858 20858

20638 20738 20938 35538 20838 24138

18062

9622 9619 9619 9619 9619 9619 9619

18065* 20665* 20765* 20965* 35565* 20865* 24165*

*May not be available from stock. GROUP D

Caliber Full-Length Die Set $73.95 Full-Length Sizer Die $51.95 Neck Die Set $87.95 Neck Sizer Die $62.95 Small Base Die Set $87.95 Small Base Sizer Die $62.95 Seater Die $40.95 Exp-Decap Unit $8.95 Trim Die $55.95

.22 K-HORNET .22 REM JET .22 SAVAGE HI POWER 5.6MMX50 RIMMED 5.7 x 28 (FN) .257 ROBERTS IMP 40 NEW 6MMX45-AR NEW 264 LBC-AR 6.5MM-06 6.5 REM MAG. 6.5MM-284 WIN 6.5 CREEDMOOR 6.5MMX47 LAPUA 6.5MMX54 MANNLICHER-SCHOEN. 6.5MMX57 MAUSER 6.5MMX68S 7MM B R REM 7MMX65 RIMMED .30 MAUSER (7.63MM MAUSER) .30 REM .30 REM AR .30-338 WIN MAG .300 H&H MAG .308 NORMA MAG 7.5MMX54 FRENCH MAS .32-40 WIN 8MM-06 8MMX68S MAGNUM .338-06/.338-06 A-SQUARE .338 NORMA MAG .348 WIN .350 REM MAG .370 SAKO MAG/9.3X66 9.3MMX74 RIMMED .376 STEYR .378 WBY MAG .400 CORBON .416 RUGER .416 REM MAG .416 RIGBY .460 WBY MAG

26201 10401 33801 26301 11701 32201 28901 16401 27801 33401 28701 32901 12901 27701 32801 27901 34101 26701 25101 29201 25301 29401 15001 15601 29101 32501 32601 34401 16701 13001 33601 33701 14201 34601 17901 33001 17501 13101 22701 22801 33101

26229 10429 33829 26329 11729 32229 28929 16429 27829 33429 28729 32929 12929 27729 32829 27929 34129 26729 25129 29229 25329 29429 15029 15629 29129 32529 32629 34429 16729 13029 33629 33729 14229 34629 17929 33029 17529 13129 22729 22829 33129

26202 * 10402* 33802* 26302* 32202* 27802* 12902 27702* 32802* 27902* 34102* 26702* 25102* 29202* 29402* 15002* 15602* 29102* 32502* 32602* 34402* 16702* 33702* 34602* 17902* 33002* 22702* 22802* 33102*

26230* 10430* 33830* 26330* 32230* 28930 16430 27830* 32930 12930 27730* 32830* 27930* 34130* 26730* 25130* 29230* 29430* 15030* 15630* 29130* 32530* 32630* 34430* 16730* 13030 33730* 34630* 17930* 33030* 13130 22730* 22830* 33130*

11703 28903 16403

11731 28931 16431 32931 25331

26238 10438 33838 26338 11738 32238 27838 33438 28738 32938 12938 27738 32838 27938 34138 26738 25138 29238 25338 29438 15038 15638 29138 32538 32638 34438 16738 13038 33638 33738 14238 34638 17938 33038 17538 13138 22738 22838 33138

9802 9800 9803 9802 9802 9806 9807 9807 9807 9807 9807 9807 9807 9809 9809 9813 9812 9812 9812 9812 9812 9832 9816 9817 9817 9828 9828 9819 9820 9821 9821 9822 9822 9835 9827 9827 9825 9826

26265* 10465* 33865* 26365* 11765^* 32265* 27865* 27765* 32865* 27965* 34165* 26765* 25165* 29265* 29465* 15065* 15665* 29165* 32565* 32665* 34465* 16765* 33665* 33765* 34665* 17965* 33065* 17565* 22765* 22865* 33165*

*If not in stock, please allow 4-6 weeks for delivery. **A .30 caliber Expander Ball is also included with Die Set and Sizer Die. ***A .310 caliber Expander Ball is also included with Die Set and Sizer Die. +See the RCBS Special Catalog for this item.

*If not in stock, allow 4-6 weeks for delivery. ^Includes extended shell holder.

GROUP E
Caliber 3-Die Carbide Taper Crimp Set $96.95 3-Die Carbide Roll Crimp Set $96.95 3-Die Roll Crimp Set $80.95 Carbide Sizer Die $63.95 Steel Sizer Die $47.95 Expander Die $28.95 Roll Crimp Seater Die $37.95 Taper Crimp Seater Die $37.95 Decap Unit $8.95 Trim Die $55.95

.25 AUTO (.25 ACP) .327 Fed/.32 S&W L/H&R MAG .32-20 WIN 9MM FAR 9MM MAKAROV .38 COLT SUPER AUTO/ACP .38-40 WIN (1)

21015 21415 23015 20215

21412

18105 23210** 35605

21037 21437 23037 20237

18132 23232 35632

21049 21453 18153 23053 20252 35653

21442 18139 35639

21062 21462 23262 23062 20262

9621 9622 9622 9622 9622 9622 9622

21065*+ 20165/21365*+ 18165*+ 23065*+ 20265*+ 35665*+

* May not be available from stock. ** 9mm FAR is a steel sizing die with taper crimp. 1 For use with lead bullets only. + Requires Extended Shell Holder, not included. Not for use with .327 Fed Mag. LEGACY SERIES DIES
Caliber 3-Die Roll Crimp Set $60.95 Steel Sizer Die $42.95 Expander Die $22.95 Roll Crimp Seater Die $27.95 Decap Unit $8.95 Trim Die $54.95

Legacy Series Dies

With new calibers and ries introduced every year, it is a wonder that black powder cartridges are still around! The Legacy series of dies supports these legendary metallic black powder cartridges and the enthusiasts that are shooting original or reproduction black powder ries.

.38-55 WIN & BAL .40-60 WIN (.408 BORE) .40-65 SHILOH SHARPS (.408 BORE) .40-70-2 1/2 SHARPS STRAIGHT .405 WIN .45-60 WINCHESTER .45-75 WINCHESTER .45-90-2.4 SHARPS STRAIGHT .45-100-2.6 SHARPS STRAIGHT .45-110-2 7/8 SHARPS STRAIGHT .45-120-3 1/4 SHARPS STRAIGHT .50-70 GOVT .50-90-2 1/2 SHARPS STRAIGHT .50-95 Winchester Express .56-50 SPENCER

36504 19004 23304 19204 23608 19804 19904 19304 19404 19504 19604 36804 19704 21304 20104

36533 19033 23333 19233 23633 19833 19933 19333 19433 19533 19633 36833 19733 21333 20133

36555 23358 23358 19258 23658 20955 20955 20858 20858 20858 19658 36858 19758 19758 20158

36538 19038 23338 19238 23638 19838 19938 19338 19438 19538 19638 36838 19738 21338 20138

9619 9619 9619 9619 9619 9619 9619 9619 9619 9619 9619 9619 9619 9619 9619

36565* 23365* 19265* 23665* 19365* 19465* 19565* 19665* 36865* 19765*

Cowboy Dies
$6.95 9663 9696 9697

1-1/2-12 Dies
The dies are precision machined by the same craftsmen that produce our Precisioneered Reloading Dies. The Full Length Sizer Die is drilled and reamed to the dimensions developed over the years. Then each die is hand polished, heat treated and then repolished. These massive dies are designed for use with the AmmoMaster2 or the AmmoMaster Single Stage Press with the .50 BMG Conversion Kit installed. All Dies listed here are manufactured with 1-1/2-12 thread. Full Length Die Set includes Full Length Sizer Die with Expander-Decapping Unit and Seater Die with Bullet Seater Plug. Trim Die is case hardened to prevent damage to the die when ling cases to length. Neck Sizer Die sizes only the neck, not the shoulder and body. 1-1/2-12
Roll Crimp Carbide Seater Seater Decap Sizer Expander Expander Unit Plug Die Assembly Die Die $7.95 $8.95 $28.95 $7.95 $57.95 $28.95 Caliber Full-Length Die Set $351.95 Full-Length Sizer Die $216.95 Neck Sizer Die $216.95 Trim Die $172.95 Lock Ring $9.95 Decap Assy $18.95 Decap Pin $6.95

ALTERNATE SEATER PLUGS 1/2-20

25 Cal. 35 gr. Gold Dot 32 Cal. Wadcutter 32 Cal. 60 gr. Gold Dot 357 SIG 125 gr. Gold Dot 357 Cal 180 gr. Silhouette 38 Cal. 125 gr. Gold Dot 38 Cal. 158 gr. Gold Dot 9mm Cal. 90 gr. Gold Dot 9mm Cal. 115 gr. Gold Dot 9mm Cal. 124 gr. Gold Dot 9mm Cal. 147 gr. Gold Dot 9mm Makarov 95 gr. Conical 9mm Makarov 90 gr. Gold Dot 40/10mm 155 gr. Gold Dot 40/10mm 165 gr. Gold Dot 40/10mm 180 gr. Gold Dot 10mm Round Nose 40-Cal 400 Black Powder 44 Cal. 240 gr. Silhouette 44 Cal. 270 gr. Gold Dot 44/45 SWC 45 Cal. 185 gr. Gold Dot 45 Cal. 200 gr. Barnex XPB 45 Cal. 230 gr. Gold Dot 45 Cal. 500 gr. Black Powder Silhouette

$6.95 90071 90014 90072 90073 90019 90065 90066 90060 90061 90062 90063 90016 90064 90067 90074 90068 90039 90042 90031 90075 90033 90069 90034 90070 90080

ALTERNATE SEATER PLUGS 1/4-28

.50 Cal. 325 gr. BarnesX 7mm Silhouette .30 Cal Silhouette

Alternate Seater Plugs (Special Application)

These through-the-top seater plugs (1/2 - 20 thread) are available separately and manufactured to t bullets shown in the chart at left. They are not furnished with the die sets or seater dies. Seater plugs with 1/4 - 28 thread design, are for use with older RCBS dies and can be made on a special order basis. Call or write RCBS for information.

Cowboy Action Shooting is just about the fastest growing shooting sport around. In addition to the usual competition traits of speed and accuracy, the shooter must recreate the spirit of the 1880s. Guns, costumes and ammo must t the period. Making ammo that ts the Old West image means loading lead bullets, jacketed bullets are not allowed. It also means that the bullets must be designed to work properly in lever-action ries and single-action revolvers. Thats where the RCBS Cowboy Dies come in. Our Cowboy Dies are built to slightly different dimensions than our regular dies to allow optimum sizing, expanding, seating and crimping needed to load great lead bullet ammo. COWBOY DIES
Caliber 3-Die 3-Die Carbide Steel 3-Die Sizer Full-Length Roll Crimp Roll Crimp Die Set Set Set $42.95 $70.95 $67.95 $67.95

DECAPPING PINS 5-PACK

6mm PPC 7mm Thompson Center Ugalde 35 Whelen 357 SIG 358 Winchester/356 Winchester 416 Remington Magnum

$2.95 09608 09609 09609 09608 09609 09609

.25-20 WIN .30-30 WIN .32 S&W LONG/.32 S&W .32 WIN SPL .32-20 WIN .32-40 WIN .357 MAG/.38 SPL .38 S&W .38-40 WIN .38-55 WIN .40-65 WIN .410" BORE .44 S&W RUSS/44 SPL .44-40 WIN .45 S&W SCHO/.45 COLT .45-70 US GOV'T

11850 14650 15750 32550

18151 20351 35651 36551 36651 18851 20951

21451 18251 18651 19151

11856 14656 15756 18156 32556 20356 35656 36556 36656 18856 20956

21456 18256 18656 19156

11857 14657 21457 15757 18157 32557 18257 20357 35657 36557 36657 18657 18857 19157 20957

9901 9902 9903/9917 9904 9905 9904 9906 9906/9916 9907 9908/9915 9909 9910 9911 9912/9913 9914

11858 14658 21458 15758 18158 32558 18258 20358 35658 36558 36658 18658 18858 19158 20958

90081 90082 90083 90084 90092 90084 90085 90086 90087 90088 90087 90089 90089 90090 90091

9628 9628 9628 9628 9628 9628 9628 9628 9628 9628 9628 9628 9628 9628 9628

416 BARRETT .460 STEYR .50 BMG 1-1/2-12

14501 27501 30001

30029

14530 27530 30030

30065

9629 9629 9629

9840 9841 9838

9602 9602 9602

SEAT PLUG ASSEMBLIES .50 BMG

Caliber $7.95

Seat Plug Assy .50 BMG A-Max (5/16-24) Seat Plug Assy .50 BMG Speer (5/16-24) Seat Plug Assy .50 BMG A-Max (5/8-18)

09642 09649 90093

DECAPPING PINS 5-PACK

Universal - Headed 22 thru 45 caliber Small - Straight 22 thru 25 caliber Large - Straight 6.5mm thru 45 caliber

Important: Expander-Decapping Units, Decapping Units and all Decapping Pins are available through RCBS Distributors and Dealers. All other replacement parts should be ordered from RCBS Customer Service.

$2.95 90164 09608 09609

SAFARI DIES
Caliber Full-Length Die Set $186.95 3-Die Roll Crimp Set $218.95 3-Die 1 Roll Crimp Set $239.95 Decap Unit $8.95

Safari Dies
9810 9804 9826 9843 9619 9619 9619

Replacement Decapping Pins

With the few exceptions listed above, all RCBS Precision, Reloader Special, X and Cowboy Sizer Dies require a #90164 headed Decapping Pinone size ts all calibers. Order straight Decapping Pins for Competition and older Precision Sizer Dies. Powr Punch Decap Assembly for use with pistol calibers in progressive presses.

Replacement Parts
Expander-Decapping Rods, Decapping Rods, Expander Balls and Decapping Pin Holders are no longer available separately. If any of these fail, order a replacement Expander-Decapping Unit or Decapping Unit as shown in the tables.

.404 JEFFERY .450 x 400 EXPRESS 3 (.400 JEFFERY) .450 RIGBY RIMLESS .470 NITRO EXPRESS 3-1/4 .500 JEFFERY .500 NITRO EXPRESS 3 .505 GIBBS

24301 24401 23001 24601

24804

24704* 24904*

Straight out of the RCBS Special Order and listed at a reduced price. The Safari Series represents cartridges typically used for dangerous game in Africa. These featured calibers were chosen based on production ries from CZ, Ruger and others that offer these timeless African hunting classics. The .500 Jeffery and .505 Gibbs are made on 1 die bodies and require a press adapter bushing (not included).

*Requires 1 press adapter bushing, not included. NOTE: RC Supreme comes standard with a 1-1/4-12 to 7/8-14 press bushing adapter.

Cowboy Shotshell Die

The diehard Cowboy Action Shooter not only uses authentic rearms and loads with black powder, but also dresses the part. Many would like to use period correct all brass shotshell ammunition, but with no good way to reload them, colorful plastic hulls continue to be used. Todays modern shotshell presses can handle the powder drop, wad seating and shot drop, but could do nothing to handle the sizing, de-priming, re-priming and crimp of a brass case. The RCBS Cowboy Shotshell die answers this need. Designed to be used in any RCBS single stage press with a removable die bushing, it performs just like a rie sizing die. The Cowboy Shotshell Die will rst size and de-prime the case; Re-priming is done with the standard priming provided with the press. Use your shotshell press to ll the case with powder, seat the wad and spacers and dispense your shot charge. Remove the sizing ring and install the nish crimp. Place your over shot card onto the shot charge and run up into the die to roll crimp the case mouth. A newly handloaded brass shotshell is completed. 99060 Cowboy Shotshell Die 99061 12 GA Shell Holder - Brass Case $89.95 $20.95

X DIE CHART
Caliber X Full-Length Die Set $59.95 X Full-Length Sizer Die $50.95 X Mandrel Assembly $11.95

.204 RUGER .22 HORNET .22-250 REM .220 SWIFT .222 REM .223 REM .223 REM SMALL BASE .223 WSSM .243 WIN .243 WSSM .25 WSSM .25-06 .260 REM 6.5MMX55 SWEDISH MAUSER .270 WIN SHORT MAG .270 WIN .280 REM 7MM REM MAG 7MM REM SA ULTRA MAG

10312 38312 37112 38812 37012 37212 38862* 10512 37312 11612 12412 38962 39012 38412 31312 37512 39062 37612 31112 17812 39112 31412 37412 37712 39162* 37912 31212 17612 39212 38912 30812 39362 37812 39262* 38712 31612 17712 39312 30912

10309 38309 37009 38809 37209 37109 38859* 10509 37309 11609 12409 38959 39009 38409 31309 37509 39059 37609 31109 17809 39109 31409 37409 37709 39159* 37909 31209 17609 39209 38909 30809 39359 37809 39259* 38709 31609 17709 39309 30909

10314 38314 37114 38814 37014 37214 37214 10514 37314 11614 12414 38964 39014 38414 31314 37514 39064 37614 31114 17814 39114 31414 37414 37714 37714 37914 31214 17614 39214 38914 30814 39364 37814 37814 38714 31614 17714 39314 30914

Special Order Reloading Dies are assigned to pricing groups depending on the number of dies per set, special components, and time required to manufacture. If the desired caliber is out of stock, please allow 30 - 45 days for delivery.

SPECIAL ORDER
RCBS Precisioneered Dies begin and end with PEOPLE! Experienced people. Patient people. And rarest of all in todays hurry-up rush-it-out world, people who still take great pleasure and pride in doing a better job than the next guy. From machine operators to hand nishers, each is responsible for providing you with the worlds nest diesRCBS Precisioneered Dies. RCBS special order dies and case forming dies, like all RCBS dies, are produced in our own plant by the most experienced die craftsmen in the industry. The dies are machined, hardened, handnished and hand-inspected for precision and quality. All products in this category carry the RCBS limited lifetime warranty. With the exception of the Group X Dies, all reloading and case forming dies are manufactured with the standard 7/8-14 thread, and may be used with most reloading presses. Group X Dies are manufactured with a 1-14 thread for use only in the RCBS AmmoMaster-Single, Big Max, Rock Chucker, Rock Chucker Supreme, Reloader Special3 and 5, Model A-2, or Model A-3 presses. When ordering Group X Dies you must specify RCBS press model so the proper adapter bushing can be supplied. All items in this catalog may be ordered through your RCBS Dealer. Or, you may order direct from the RCBS factory. All factory orders must be paid in advance of shipment and are not subject to cancellation or return for credit. Payment may be made by check or money order in U.S. funds or your order may be charged to your Visa or MasterCard account. Due to bank collection fees, international orders (except Canada) must be paid by MasterCard or Visa only. Sorry, no C.O.D. shipments. Be sure to include your daytime phone number in case we need to contact you concerning your order. Shipping and handling: $0.01-$20.00 = $4.50, $20.01-$100.00 = $7.50, $100.01-$200.00 = $11.50, $200.01-up = $16.50 (Domestic U.S. only). UPS Next Day Air and 2nd Day Air are available. Call for more information. International consumer direct orders will be shipped via UPS or FedEx International ONLY.

X Dies
Trim the case oncenever trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020 off the maximum case length to standardize the case. The X-Die doesnt shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life. Available in most popular bottleneck calibers as shown in the chart. Standard 7/8-14 thread. U.S. Patent # 5635661 If you are just starting to reload any of the calibers listed, order the X-Full Length Die Set containing the X-Sizer Die and Standard Seater Die. If you already own a regular set of dies for the chosen caliber, order only the X-Full Length Sizer Die, as you wont need to purchase another Seater Die.

7MM REM ULTRA MAG 7MM STW 7MM WIN SHORT MAG 7MM-08 REM .30-06 SPGFLD .30-06 SPGFLD SMALL BASE .30-30 WIN .300 REM SA ULTRA MAG .300 REM ULTRA MAG .300 WBY MAG .300 WIN MAG .300 WIN SHORT MAG .303 BRITISH .308 WIN .308 WIN SMALL BASE 8MMX57 MAUSER .325 WIN SHORT MAG .338 REM ULTRA MAG .338 WIN MAG .375 REM ULTRA MAG

Custom Reloading & Case Forming Dies

RCBS no longer produces unique, one-of-a-kind, custom dies or custom bullet moulds. RCBS still offers approximately 650 special order die sets and 350 case form sets in this special order catalog. RCBS offers more than 1,000 other calibers, reloading die sets and case form sets which are not listed in this catalog. For more information, email rcbs.tech@atk.com or call 1-800-533-5000.

How To Select Bushings for Half Grain Charges:

Powder bushings are identied by numbers that correspond to the size of their inside diameter. (For instance, the inside diameter of the #456 bushing is .456 inches.) Bushings for powder charges in half-grain increments can be calculated from this chart. Simply, split the difference between the two even-grain bushings, and select the bushing nearest the result. Example: To nd the bushing for 18 12 grains of Alliant Red Dot powder, note that bushing #468 gives a charge of 18 grains and that bushing #480 gives 19 grains. Split the difference between 468 and 480, and the result is 474. Thus, the correct bushing for 18 12 grains of Red Dot is bushing #474. All charges listed on this chart are an average of several loads weighed following the complete reloading cycle. Powders used in establishing these loads were from ballistic samples supplied by the manufacturer or sealed tins of recent manufacture. Charges may vary slightly due to operators technique and/or powder variables. Always check actual charge weight against recommended charges and adjust bushing size as necessary. Bushings listed, but not offered from RCBS, can be obtained from other manufacturers. SHOTSHELL POWDER BUSHINGS
Part # 89111 89112 89113 89114 89115 89116 89117 89118 Bushing # 354 360 366 372 381 390 396 402 Part # 89119 89120 89121 89122 89123 89124 89125 89126 Bushing # 408 414 420 423 426 429 432 435 Part # 89127 89128 89129 89130 89131 89132 89133 89134
SUGGETED RETAIL PRICE

Riser Stand Shown Not Included

Shot Bushing

Powder Bushing
FOR TARGET LOADS

The Grand
The Grand is intended for the shot gunner who requires accurate, precision shotshells for hunting or clay target shooting. The operator merely has to start a hull at station 1 and insert a wad in the wad guide at station 4. All other functions are performed automatically by The Grand. Once in full operation, a loaded shotshell is dispensed each time the handle is cycled through the full down and up strokes. The case activated Powder System means no hull, no powder dropped and therefore no spillage, and there is no need to manually turn the powder on and off. Because the powder charging station is at the front of the press, it is easy to view the powder charge and convenient to remove the powder-charged hull for weighing the powder charge, if deemed necessary.The Powder System provides three positions for the Powder Measure: ON, OFF, and EMPTY. To completely empty the powder hopper, attach the drain tube and turn the powder measure to EMPTY. The powder will then drop back into the powder can at the bottom of the drain tube. The Powder Bushings easily interchange in about 30 seconds. Powder Bushings are available for all popular loads. Hornady Powder Bushings may also be used in The Grand charge bar. The capacity of the Powder Hopper is 1 lb. of your favorite smokeless powder. The Shot System is also case activated. Again, no hull, or no wad, no shot and best of all, no spillage. You never need to continually turn the shot measure ON or OFF. The shot system is easily drained. Merely attach the drain tube below the shot measure. Shift the Shot Measure to EMPTY. Shot then falls back in the shot bag or container. Its that quick and simple, plus no lead shot on the oor! See your RCBS Dealer. Pull the handle and take a hull for a ride around the 8 stations to see how easy reloading shotshell ammo really is. Interchangeable Shot Bushings are changed in about 30 seconds, and are available for most popular charge weights and shot sizes. Hornady Shot Bushings are also compatible with The Grand charge bar. The Shot Hopper has a capacity of 25 lbs. of shot. Through the unique combination of the Powder System, Shot System and Universal Case Holders, the user can load just one hull at a time without the fear of spilling powder or shot. Conversion Kits are available for changing to 12 gauge or 20 gauge as required. These make the changeover relatively easy and quick. Everything you need to make the changeover is included. U.S. Patent No. 6,772,668. NOTE: Not for use with black powder. NOTE: See page 45 for Shot & Powder Bushing information. *Direct from RCBS ONLY 89001 89003 89005 89007 The Grand 12 Gauge The Grand 20 Gauge The Grand Conversion Kit 20 Gauge The Grand Conversion Kit 12 Gauge $1025.95 $1025.95 $489.95 $489.95 89010 The Grand Riser Stand 86885 The Grand Dust Cover 89009 The Grand Hydraulic Unit $29.95 $25.95 $899.95*

Bushing # 438 441 444 447 450 453 456 459

Part # 89135 89136 89137 89138 89139 89140 89141 89142

$6.95 Bushing # 462 465 468 471 474 480 486 498

SHOTSHELL LEAD SHOT BUSHINGS FOR FIELD LOADS #6S

FOR LIGHTER PACKING OF SMALLER SHOT SIZE.
SUGGETED RETAIL PRICE

SHOTSHELL LEAD SHOT BUSHINGS

CALIBRATED
TO MEASURE MAXIMUM LEGAL LOADS FOR TRAP AND SKEET SHOOTING.
SUGGETED RETAIL PRICE

COMPENSATES

Interchangeable Bushings:

Part # 89170 89171 89172 89173 89174 89175

$6.95 Bushing 7/8 oz. 1 oz. 1-1/8 oz. 1-1/4 oz. 1-3/8 oz. 1-1/2 oz.

For use with The Grand or Mini Grand shotshell reloader. Designed so shot and powder bushings cannot be accidentally reversed in the charge bar. The bushings make it easy to change from one load to another. POWDER CHARGE WEIGHT
Powder Type Accurate Solo 1000 Accurate Solo 1250 Accurate No. 2 Improved Accurate Nitro 100 DuPont 700-X DuPont PB DuPont SR 7625 DuPont 800-X DuPont SR 4756 DuPont 4227 Alliant American Select Alliant Red Dot Alliant Green Dot Alliant Unique Alliant Herco Alliant Blue Dot Alliant 2400 Hodgdon Clays Hodgdon International Hodgdon Universal Hodgdon HS-6 Hodgdon HS-7 Hodgdon Titewad Hodgdon Longshot Hodgdon Titegroup Winchester 540 Winchester 571 Winchester Super Target Winchester Super Lite Winchester Super Field
IN

Part # 89188 89189 89190 89191 89192 89193 89194

$6.95 Bushing 7/8 oz. #9 1 oz. #7-1/2 1 oz. #8 1-1/8 oz. #7-1/2 1-1/8 oz. #8 1-1/8 oz. #8-1/2 1-1/8 oz. #9

GRAINS
19 438 429 378 435 453 426 402 423 408 447 480 456 414 426 372 339 468 435 402 318 318 432 348 360 318 318 429 363 20 447 441 387 447 465 435 414 429 21 459 453 396 456 471 447 426 438 426 468 498 480 435 450 390 495 459 420 336 339 453 366 378 336 22 474 459 408 465 486 456 438 447 435 366 477 510 492 444 462 396 507 471 429 345 348 462 372 387 345 23 24 25 26 27 28 29 30 31 32 34 35 36 37 38 38 39 40 41 42 43 471 480 492 501 510 516 525 537 543 555 558 417 498 465 444 459 447 483 519 501 453 471 408

14 15 16 17 18 387 399 411 420 432 369 384 396 408 420 357 366 375 387 399 411 423 402 414 429 441 366 390 402 414 345 381 390 372 390 402 414 366 417 438 420 381 393 423 453 435 393 405 324 441 414 378 300 432 468 447 405 414 366 330 456 423 390 309

474 453 468 459

486 462 474 486 480 507 525 534 549 558 471 480 525 534 549 558 580 588 390 408 414 420 426 435 441 447 453 462 468 474 480 486 498

The Mini Grand

The Mini Grand seven station single stage shotshell press is optimum for use by hunters and target shooters. The Mini Grand will load lead or steel shot (with optional conversion kit) and hulls up to 3 12. Loading rate is approximately 200 rounds an hour. The Mini Grand utilizes the same powder and shot bushings as our popular Mini Grand progressive shotshell loader. Powder and shot bushing changes in about one minute. Powder capacity is one-half pound of your favorite smokeless powder. Shot capacity is 12 12 pounds. 89014 Mini Grand 12 Gauge $169.95 89015 Mini Grand 20 Gauge $169.95 89016 Mini Grand 12 Gauge Taper Crimp die $13.95 89017 Mini Grand 20 Gauge Taper Crimp die $13.95 89018 Mini Grand Steel Shot conversion kit $14.95 86886 Mini Grand Dust Cover $24.95 NOTE: See page 45 for Shot & Powder Bushing information.

The RCBS Handbook of Shotshell Reloading

The most up-to-date reference book on shotshell reloading and the only shotshell reloading manual exclusively featuring RCBS reloading presses. Destined to be the denitive handbook on shotshell reloading, this innovative work consists of 284 pages. The advanced shotshell reloader as well as the beginner will nd this volume an invaluable guide with over 2000 reloading recipes, facts, brand new information, color photographs, cut-a-way and mechanical drawings, illustrations and a wealth of essential data not available anywhere else. 99903 RCBS Handbook of Shotshell Reloading $25.95

405 390 354 369

423 405 369 381

456 489 468 423 438 381 483 447 411 327 330 441 357 369 327

513 465 477 414

522 474 489 423

534 549 558 483 492 501 510 498 513 522 531 549 558 564 573 588 594 435 441 447 459 468 474 483 489 495 501 510 516 522 531 534 543 549 555

291 300 312 429 375 390 402 342 354 366

384 396 408 420 300 309 318 330 345 324 330 342 351 300 309 414 345 354 327 345 354

483 438 357 357 474 381 396

495 447 360 363 486 390 405 360

507 456 366 369 492 396 366

468 480 489 501 375 381 387 393 402 408 414 423 429 378 384 390 396 405 411 417 423 429 438 444 450 405 414 423 429 435 444 450 459 465 471 480 486 492 498 381 390 396 402 408 414 423 429 435 441 444 450 459 465 471 423 429 438 444 450 456 462 468 474 480 486

438 450 459 471 480 372 381 390 402 420 426 432 441 450 456 462

Pro-Melt Furnace
Heres a hot little number. Our heavy-duty Pro-Melt furnace has a high-temperature heating element, plus an industrial-grade thermostat coupled to a remote sensor on the bottom of the pot for added accuracy and response. Range: 650 to 850 F. Can be set up for either left or right-handed operation. Lead capacity is 22 pounds. 800 Watts. Two year limited warranty. 81100 Pro-Melt Furnace 120 VAC 81200 Pro-Melt Furnace 240 VAC-EUR $466.95 $481.95

Lead Thermometer
With a 1000F range and +/- 1% accuracy, our lead thermometer lets you pour lead at the optimum temperature. Large numbers are printed on a 1-1/2, glass-covered face. Six inch probe works with RCBS Pro-Melt furnace or pot. An adjustable 6 handle helps to prevent burning of ngers. 81175 Lead Thermometer $59.95

Bullet Mould Handles

Solid steel frames with extra-long, premium hardwood handles for comfort. Perfect for home bullet casting. One size ts all RCBS bullet moulds only. 80025 Bullet Mould Handles $43.95

Mould Mallet
Be kind to your bullet moulds. Stop using a metal object to tap out your cast lead bullets and potentially damaging your mould! RCBS has reintroduced our wooden mould mallet to safely accomplish this goal. 80007 Mould Mallet $12.95

Ingot Mould
Mould up to four ingots at once and cool them quickly with this handy accessory. Its perfect for melting down scrap lead and preparing alloys for future use. 80005 Ingot Mould $22.95

Neck Expander Dies for Cast Rie Bullets

To eliminate deforming the base and shaving lead off the sides of your lead rie bullets during seating. RCBS strongly recommends using our Neck Expander Die. In one step, the neck expander die expands the neck and slightly ares the case mouth of your bottle neck cases. 39800 Neck Expander Body 39801 Neck Expander Plug Rod Neck Expander Plug (see chart) $23.95 $5.95 $10.95

Bullet Lubricant
RCBS Bullet Lubricant ts the Lube-A-Matic Sizer/Lubricator and most others that use a hollow stick lubricant. Its a non-toxic, temperature resistant blend, developed in cooperation with toprated competition cast-bullet shooters. Our rie bullet lubricant is a blend of Alox and beeswax, formulated to NRA specications. Works ne for pistol bullets. Rie Lube for outdoor use only. 80008 Bullet Lubricant 80009 Rie Bullet Lubricant $5.95 $5.95

Lead Pot
This heavy-duty cast-iron pot holds up to 10 pounds of molten metal. It features a at bottom for stability, bail handle, pouring spout, and a tab lifter for gripping with insulated tongs or pliers. 80010 Lead Pot $22.95

Lead Dipper
A large-capacity bowl for easy scooping and stirring. The lead dipper has a tapered pouring spout to t sprue holes and has a solid hardwood grip. Overall length: 11-1/2 in. 80015 Lead Dipper $27.95

NECK EXPANDER DIES

Bullet Diameter Complete Die $29.95 Expander Plug Only $11.95

Lube-A-Matic2 Bullet Sizer/Lubricator

Size and lubricate cast bullets in one step with the Lube-A-Matic2. Just insert a bullet in the sizer die and pull the handle. A sized and lubricated bullet ejects on the upstroke. A ngertip regulator lets you ne-tune lubricant ow. The Lube-A-Matic2 also seats gas checks. A high quality tool thats a must-have item for the serious bullet caster. (Die and top punch sold separately.) See chart on pages 48-51 for sizer die and top-punch sizes 80040 Lube-A-Matic2 86880 Dust Cover $209.95 $11.95

.224 .228 .243 .257

39803 39805 39807 39809 39811 39813 39815 39817 39819 39821 39823 39825 39827 39829 39830 39831 39833 39835

39851 39853 39855 39857 39859 39861 39863 39865 39867 39869 39871 39873 39875 39877 39878 39879 39881 39883

WARNING
MELTING LEAD AND CASTING LEAD OBJECTS WILL EXPOSE YOU AND OTHERS IN THE AREA TO LEAD, WHICH IS KNOWN TO CAUSE BIRTH DEFECTS, OTHER REPRODUCTIVE HARM AND CANCER. SEE INSTRUCTIONS ON REDUCING EXPOSURE SUPPLIED WITH PRODUCT.

.264 .277 .284 .308 .309 .310 .311 .321 .323 .338 .348 .358 .375 .416

Bullet Casting Video (Not Pictured)

An age-old art explained with modern technology. This comprehensive video is authoritative, informative, and entertaining to watch. Step-by-step instructions on cast bullet preparation and moulding. 99907 Bullet Casting Video $24.95

RIFLE BULLET MOULDS

$90.95
Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number 22 22-055-SP 82007 .225" dia. 82240 #506 85506 6mm 243-095-SP 82015 .244" dia. 82202 #509 85509 25 257-120-SP 82016 .258" dia. 82204 #515 85515 270 270-150-SP 82017 .278" dia. 82206 #529 85529 7mm 7mm-168-SP 82018 .285" dia. 82209 #531 85531 30 30-115-SP 82009 .309" dia. 82212 #535 85535 30 30-150-FN 82019 .309" dia. 82212 #546 85546 30 30-180-SP 82020 .309" dia. 82212 #541 85541

PISTOL BULLET MOULDS

$86.95
Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number 32 32-077-RN 82021 .311" dia. 82214 #465 82536 32 32-098-WC 82060 .314" dia. 82216 #445 82543 32 32-098-SWC 82061 .314" dia. 82216 #444 82542 380 38-090-RN 82057 .356" dia. 82221 #311 82513 9mm 9mm-115-RN 82026 .356" dia. 82221 #115 82504 9mm 9mm-124-RN 82062 .356" dia. 82221 #401 82521 9mm 9mm-124-RN-TG 82063 .356" dia. 82221 #115 82504 9mm 9mm-124-CN 82027 .356" dia. 82221 #402 82522

RIFLE BULLET MOULDS

$90.95
Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number 30 30-180-FN 82014 .309" dia. 82212 #546 85546 7.62mm 7.62-130-SPL 82022 .309" dia. 82212 #554 85554 310 Cadet 310-120-RN 82023 Bullet NOT SIZED or Lubed 32 32-170-FN 82024 .321" dia. 82217 #550 85550 35 35-200-FN 82028 .358" dia. 82223 #565 85565 375, 38-55 37-250-FN 82029 .376" dia. 82225 #570 85570 38-55 378-312-BPS 82090 .378" dia. 82252 #608 85608

PISTOL BULLET MOULDS

$86.95
Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number 9mm 9mm-147-FN 82077 .356" dia. 82221 #556 85556 38/357 38-148-WC 82031 .358" dia. 82223 #429 82529 38/357 38-150-SWC 82032 .358" dia. 82223 #429 82529 38/357 38-158-RN 82064 .358" dia. 82223 #311 82513 38/357 38-158-SWC 82065 .358" dia. 82223 #429 82529 40/10mm 40-180-FN 82066 .401" dia. 82245 #558 85558 10mm 10mm-170-SWC 82067 .400" dia. 82243 #518 85518 10mm 10mm-200-SWC 82068 .400" dia. 82243 #518 85518

PISTOL BULLET MOULDS

$86.95

RIFLE BULLET MOULDS

$90.95
Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number 40 40-300-SP-CSA 82070 .410" dia. 82226 #378 82520 40 40-350-SP-CSA+ 82072 .410" dia. 82226 #378 82520 40 40-400-SP-CSA+ 82074 .410" dia. 82226 #378 82520 40 40-400-BPS+ 82086 .410" dia. 82226 #609 85609 40 40-420-BPS+ 82073 .410" dia. 82226 #620 85620 416 416-350-FN+ 82075 .417" dia. 82246 #562 85562 44-40 44-200-FN 82036 .428" dia. 82244 #595 85595

Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number

41 41-210-SWC 82039 .410" dia. 82226 #420 82541

44 44-225-SWC 82041 .430" dia. 82229 #421 82527

44 44-240-SWC 82042 .430" dia. 82229 #421 82527

44 44-245-SWC 82043 .430" dia. 82229 #421 82527

44 44-250-K 82080 .430" dia. 82229 #421 82527

44 44-300-SWC 82079 .430" dia. 82229 #421 82527

45 Auto 45-185-SWC-BB 82052 .452" dia. 82233 #680 82545

45 Auto 45-200-SWC 82046 .452" dia. 82233 #460 82534

45 Auto 45-201-SWC 82047 .452" dia. 82233 #680 82545

PISTOL BULLET MOULDS

$86.95
Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number 45 45-225-CAV 82081 .454" dia. 82234 #552 85552 45 Auto 45-230-RN 82048 .452" dia. 82233 #374 82519 45 Colt 45-250-FN 82049 .454" dia. 82234 #190 82506 45 Colt 45-255-SWC 82050 .454" dia. 82234 #424 82528 45 Colt 45-270-SAA 82092 .454" dia. 82234 #424 82528 45 45-300-SWC 82083 .452" dia. 82233 #424 82528 480 Ruger* 476-400-SWC+ 82094 .476" dia. 82237 #638 85638 50 AE 50-340-SWC+ 82087 .500" dia 82254 #611 85611 500 S&W 50-400-SWC+ 82099 .500" dia. 82254 #639 85639

RIFLE BULLET MOULDS

$90.95
Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number 11mm 44-370-FN+ 82093 .446" dia. 82253 #585 85585 45 45-300-FN 82051 .458" dia. 82236 #600 85600 45 45-325-FN-U 82045 .458" dia. 82236 #383 85583 45 45-405-FN+ 82053 .458" dia. 82236 #600 85600 45 45-500-FN+ 82054 .458" dia. 82236 #600 85600 45 45-500-BPS+ 82085 .458" dia. 82236 #607 85607 45 45-530-RN+ 82084 .458" dia. 82236 #621 85621

* also .475 Linebaugh

+ single cavity mould

* also .475 Linebaugh

+ single cavity mould

WARNING: MELTING LEAD AND CASTING LEAD OBJECTS WILL EXPOSE YOU AND OTHERS IN THE AREA TO LEAD, WHICH IS KNOWN TO CAUSE BIRTH DEFECTS, OTHER REPRODUCTIVE HARM AND CANCER. SEE INSTRUCTIONS ON REDUCING EXPOSURE SUPPLIED WITH PRODUCT.

SILHOUETTE BULLET MOULDS

$90.95
Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number Seater Plug Part Number 6.5 6.5-140-SIL 82149 .265" dia. 82207 #520 85520 7mm 7mm-145-SIL 82150 .285" dia. 82209 #531 85531 7mm SIL 09696 308 308-165-SIL 82152 .309" dia. 82212 #541 85541 308 SIL 09697 308 308-200-SIL 82153 .309" dia. 82212 #541 85541 308 SIL 09697 357 357-180-SIL 82154 .358" dia. 82223 #430 82530 357 SIL 90019* 44 429-240-SIL 82156 .430" dia. 82229 #422 82526 44 SIL 90031*

NORTH-SOUTH SKIRMISH BULLET MOULDS

$109.95
Diameter .576" .578" .580" .584" Mould .576-412 Hodgdon+ .578-414 Hodgdon+ .580-416 Hodgdon+ .584-419 Hodgdon+ Part Number 82160 82161 82162 82164

NORTH-SOUTH SKIRMISH BULLET MOULDS (ADJUSTABLE)

$109.95
Diameter .500" .520" .540" Mould .500 Hodgdon+ .520 Hodgdon+ .540 Hodgdon+ Part Number 82166 82170 82172

Older die sets utilizing a 1/4 - 28 threaded seater plug require #09698 for .357 SIL and #09699 for .44 SIL.

MINIE BALL MOULDS

$104.95

ALTERNATE BULLET SIZES

Caliber Size

FOR

CAST BULLETS
Part Number

Lube-A-Matic Sizer Die & Top Punch

82200 82201 82203 82205 82208 82211 82213 82214 82242 82215 82216 82219 82220 82221 82222 82224 82249 82227 82228 82230 82231 82232 82233 82235 82250

Diameter .575"

Mould .50-500-M+

Part Number 82103

Sizer Die

.22 6mm .25 270 7mm .30 .30 .30 .32 .32 .32 38/357 38/357 .38 357 375/38-55 .40 44-40 .44 .44 .45 .45 45 Colt .45 500 S&W/50 AE

.224" .243" .257" .277" .284" .308" .310" .311" .312" .313" .314" .354" .355" .356" .357" .375" .408" .427" .429" .431" .450" .451" .452" .457" .501"

.224" dia. .243" dia. .257" dia. .277" dia. .284" dia. .308" dia. .310" dia. .311" dia. .312" dia. .313" dia. .314" dia. .354" dia. .355" dia. .356" dia. .357" dia. .375" dia. .408" dia. .427" dia. .429" dia. .431" dia. .450" dia. .451" dia. .452" dia. .457" dia. .501" dia.

Lube-A-Matic Sizer Die Lube-A-Matic Top Punch Silhouette Bullet Seater Plug

$31.95 $10.95 $6.95

Abbreviation Guide
CSA - C Sharps Arms TG U PT CN FN RN - Target - Universal - Pointed - Conical Nose - Flat Nose - Round Nose SPL - Special SWC - Semi-Wadcutter WC - Wadcutter SP BB M R SIL K - Semi-Point - Bevel Base - Minie Ball - Round Ball - Silhouette - Keith Type COWBOY BULLET MOULDS
$94.95
Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number 25-20 Win. 25-85-CM 82301 .258" 82204 #630 85630 30-30 Win 30-150-CM 82302 .309" 82212 #631 85631

ROUND BALL MOULDS

$86.95
Diameter .435" .440" .451" .457" .490" Mould .435-112 .440-116 .451-125 .457-130 .490-160 Part Number 82134 82135 82138 82140 82142

CAV - Cavalry SAA - Single Action Army

BPS - Black Powder Silhouette CM - Cowboy Mould

All RCBS Bullet Moulds are machined to exacting specications ensuring accurate and clean casts time after time. NOTE: All moulds are shown slightly smaller than actual size. Unless noted otherwise, all RCBS bullet moulds are double cavity type. Each mould is identied by a ve or six digit number, followed by two or three letters. The rst two or three digits identify bullet caliber, the last three are bullet weight in grains. (Round Balls are identied by caliber only.) Bullet weights are established by the following methods: Rie & Silhouette BulletsLinotype alloy. Pistol, Black Powder Silhouette and C Sharps Arms Bullets An alloy of one part tin to ten parts lead. Cowboy Bulletsan alloy of one part tin to twenty parts lead Round & Minie BallsPure lead. +Available in single cavity only.

COWBOY BULLET MOULDS

$90.95
44-40 WCF/ 44 Russ/ 44 Special/ 44 Magnum 44-200-CM 82307 .428"/.430" 82244/82229 #636 85636

Caliber Mould Part Number Sizer Die Part Number Top Punch Part Number

32 H & R Mag/ 30-20Win. 32-90-CM 82303 .314" 82216 #632 85632

38 Special/ 357 Magnum 38-140-CM 82304 .358" 82223 #633 85633

38 Special/ 357 Magnum 38-158-CM 82305 .358" 82223 #633 85633

38-40 WCF 40-180-CM 82306 .401" 82245 #635 85635

45 S&W Sch/ 45 Long Colt 45-230-CM 82308 .452"/.454" 82233/82234 #637 85637

56-50 Spencer 50-350-CM+ 82309 .512 82255 #624 85624

+ Single cavity mould

WARNING: MELTING LEAD AND CASTING LEAD OBJECTS WILL EXPOSE YOU AND OTHERS IN THE AREA TO LEAD, WHICH IS KNOWN TO CAUSE BIRTH DEFECTS, OTHER REPRODUCTIVE HARM AND CANCER. SEE INSTRUCTIONS ON REDUCING EXPOSURE SUPPLIED WITH PRODUCT.

A durable and convenient way to carry your handloads. Available in several sizes to sure-t the cartridge size.

Equipment readily secures to plate for quick tool change-overs. Makes the most of limited bench space.

Stuck Case Remover

Our Stuck Case Remover extracts stuck cases from standard sizer dies without damaging the die, using a very simple two-step removal process. 09340 Stuck Case Remover $20.95

Ammo Boxes
These tough, plastic boxes have ush exteriors with recessed latches. Theyre designed to stack easily, and feature an antirattle bullet-tip nest, empty case support, and long-lasting hinge. Available in ve sizes: 86901 Small Rie 86902 Medium Rie 86903 Large Rie 86905 Medium Pistol 86906 Large Pistol See Reference Chart on page 34 $7.95 $7.95 $9.95 $5.95 $6.95

RCBS.LOAD Comprehensive Software for The Serious Shooter

Traditionally, ballistics software has fallen into two categories, programs that analyze trajectories, and programs that let you archive reloading data that you developed. If you wanted to do both, you had to purchase two programs. If you wanted industry reloading data in electronic form, you were out of luck. Until nownow theres RCBS.LOAD, a sophisticated program that combines the latest technology in trajectory analysis with an incredible database manager. Bullet trajectories up to six at a time can be viewed as a graph, and you can choose from a list of 2,069 component bullets plus a catalog of over 2,360 factory loads. You can prescribe the initial ring conditions, change the environmental conditions and readily determine maximum point-blank range in three dimensions. As a database manager, RCBS.LOAD sets new standards. Data can be viewed as text and also graphed for visual analysis. Data can be sorted and ltered to see specic details. Included is an index of data sources showing where to nd loads for over 760 standard and wildcat cartridges. RCBS.LOAD version 3.0 includes electonic versions of the Speer Reloading Manual #14, the RCBS Cast Bullet Manual and has been upgraded to access all but the most current reloading manuals from other industry sources free of charge! With access to 450,000 plus loads, the collection of data now included with RCBS.LOAD is typically more data than one might compile over a lifetime. Additional electronic manuals covering the most recent industry reloading sources can be unlocked with the possession of the printed manual. With RCBS.LOAD, you build your own reloading databases that can be analyzed like the industry sources. RCBS.LOAD comes with an exciting Cartridge Designer feature. Starting with a parent cartridge, you can change the dimensions and see the case capacity for your wildcat cartridge recalculate automatically. Theres a handy Ballistic Coefcient Calculator in case your bullet isnt in the massive bullet database. Other useful references include a kinetic energy calculator, minimum twist rate chart, pressure assignments list, metric equivalents, powder burning rate chart, and a database of dimensioned drawings for over 517 cartridges. Best of all, this power comes at about the cost of four boxes of 30-30 ammo. Try RCBS.LOAD and see why its the standard by which all other ballistic programs will be judged. 99915 RCBS.LOAD Reloading Software $123.95 * Windows 98 and Windows NT are registered trademarks of Microsoft, Inc.

Stuck Case Remover2 Kit

The Stuck Case Remover2 Kit lets you extract cases from dies with removable guide bushings. Its also useful for our Competition Dies or other sizer dies with a raised expander ball. Kit contains two extractor nuts and two punch rods. 09355 Stuck Case Remover2 Kit $8.95

Accessory Base Plate2

Save time, space and eliminate a loading bench top full of holes. Simply attach the Base Plate2 to any work surface, then use the pre-tapped, letter-coded holes to quickly mount or dismount RCBS Case Trimmers, Trim Pro, Powder Measure Stand, Lube-A-Matic2, Reloader Special, Rock Chucker, Pro 2000, Turret Press, AmmoMaster, Partner Press and the APS Bench Mounted, Automatic and Standard Priming Tools. Fastening hardware included. Measures approximately 10 x 6 x 1. 09280 Accessory Base Plate2 $39.95

Fold-Up Hex Key Wrench

Eight heat-treated hex keys t most hex head screws on RCBS equipment. Key sizes: .050,1/16, 5/64, 3/32, 7/64, 1/8, 9/64 and 5/32. Handy and easy to locate on the bench when you need a hex key.

Precisioneered Handloading DVD

Whether youre an old pro or just getting started in handloading, this is the best 30-minute time investment youll ever make. Precisioneered Handloading is both entertaining and educationala must see for the do-it-yourselfer. 99910 Precisioneered Handloading DVD $10.95

Speer Reloading Manual #14

Get all the facts on loading virtually any round you need. This 14th volume contains technical data to maximize your reloading process. 7109515 Speer Reloading Manual #14 $35.95

98975 Fold-Up Hex Key Wrench

$10.95

AmmoMaster Chronograph
Self-contained chronograph that checks velocity of arrows, paintball guns, ries and pistols. Diffuser and supports store within housing. Detached keypad w/ 20ft. cord. Velocity range of 50-7000 fps. 81190 81191 81192 81193 81194 AmmoMaster Chronograph Side Support (2 pack) Diffuser Skyscreen Start Skyscreen Stop $154.95 $11.95 $11.95 $35.95 $35.95

Trigger Pull Gauge

Lets you measure the trigger pull force of any rearm. Reads grams on the left, ounces on the right. Capacity 2000 grams; 72 ounces. 09450 Trigger Pull Gauge $26.95

Shade Canopy
Delivering 5 feet of sun-blocking shade, this canopy features an articulating adjustment that provides shade from any angle. Includes seat extension bar, leg tie-downs and spikes. 9323 Shade Canopy w/extension & tie downs $47.95

Optics Mount
Mounts to either side of bench. Features rapid adjustment for fast alignment of camera, spotting scope or rangender, standard -20 camera thread adaptor and lever style locking handles. 9324 Optics Mount $64.95

RCBS Logo Hats

Identify yourself as a shooting expert with these stylish hats from RCBS. Form tted, low prole visor and Realtree Advantage camo accents. 99150 Black/Camo Logo Hat 99151 Tan/Camo Logo Hat $9.95 $9.95

Premium Trigger Pull Scale

Measure the force needed for trigger release of rearms. Scale is accurate to +/- 2 ounces in 2 ounce increments up to 8 pounds. A sliding indicator remains at the highest reading when the trigger releases, allowing accurate measurement. 87307 Premium Trigger Pull Scale $43.95

R.A.S.S. Transport Bags

Carry your R.A.S.S. with these rugged Transport Bags. Made from tough nylon with an impact resistant interior sheet. Ample storage pockets handle R.A.S.S. accessories. 9325 Transport/Storage Bag (2-pc. soft bag) $169.95

Beverage Holder
Keep cool and fully hydrated for those long shooting sessions at the range or in the eld. This handy beverage holder accommodates can, bottles and insulated beverage wraps. 9326 Beverage Holder $10.95

RCBS Shooting Shirt

Comfortable to wear and great for shooting, this shirt proudly displays your support of RCBS and the shooting sports. 100% cotton blend with ample room for shooting. 99140 99141 99142 99143 Shooting Shirt - Medium Shooting Shirt - Large Shooting Shirt - XLarge Shooting Shirt - XXLarge $39.95 $39.95 $39.95 $43.95

Military Trigger Pull Scale

Measure the force needed for trigger release of your Double Action pistol or Military Rie, you might be surprised! Scale is accurate to +/- 8 ozs in 8 oz increments. Measures in pounds or kilograms from 0-25 pounds or 0-11.34 kilograms. A sliding indicator remains at the highest level. Anodized aluminum body with stainless steel spring. 87306 Trigger Pull Gauge $47.95

Low Back Seat

Low back seat features a vinyl wrapped, thick foam padded seat that provides lower back support and folds down to minimize storage space. Seat bar accommodates most sizes and provides shooting relief. 9322 Low Back Seat w/seat bar $116.95

R.A.S.S. Bench
Its the new benchmark in shooting benches. Varmint hunters and target shooters will love the 360 rotation, rapid elevation adjustment (for 20 of upward and 20 of downward travel), ne adjustment knob, adjustable leveling feet and amazing portability. Sets up in minutes with no tools required. 9320 R.A.S.S. Bench NOTE: Accessories shown are extra $487.95

Utility Tray
Keep all your shooting accessories close at hand with this sturdy utility tray. Ample storage and holds your gear safe and secure at the range or in the eld. 9321 Utility Tray $63.95

Look for these other ne products to complement your purchase:

Alliant Powder
Red Dot Powder

Speer Bullets
DeepCurl Bullets

Federal Premium
Components

ATK Security and Sporting features a unique collection of brands that give shooting, tactical and outdoor enthusiasts everything they need in one place. From ammunition, optics and reloading equipment to gun care, hunting and tactical gear, we offer advanced, high-performance products. Look for these leading brands.

www.federalpremium.com 1-800-322-2342

www.cci-ammunition.com 1-800-256-8685

www.speer-ammo.com 1-800-256-8685

www.weaveroptics.com 1-800-635-7656

www.blackhawk.com 1-800-694-5263

www.championtarget.com 1-800-635-7656 1-800-441-4971 (Clays)

www.speer-bullets.com 1-800-256-8685

www.rcbs.com 1-800-533-5000

www.alliantpowder.com 1-800-276-9337

www.buckcommander.com 1-800-635-7656

www.outers-guncare.com 1-800-635-7656

www.gunslickpro.com 1-800-635-7656

Your purchase helps us nancially support many outdoor conservation organizations that protect our habitats and heritage.

Thank you.
RCBS 605 Oro Dam Blvd. East Oroville, CA 95965 For technical questions, contact Customer Service at 1-800-533-5000 or rcbs.tech@atk.com

www.rcbs.com
2010 RCBS Printed in the U.S.A.