ink
ink
ink
Writing inks date from about 2500 BC and were used in ancient Egypt and
China. They consisted of lampblack ground with a solution of glue or gums,
molded into sticks, and allowed to dry. Before use, the sticks were mixed
with water. Various coloured juices, extracts, and suspensions of substances
from plants, animals, and minerals also have been used as inks, including
alizarin, indigo, pokeberries, cochineal, and sepia. For many centuries, a
mixture of a soluble iron salt with an extract of tannin was used as a writing
ink and is the basis of modern blue-black inks. The modern inks usually
contain ferrous sulfate as the iron salt with a small amount of mineral
organic acid. The resulting solution is light bluish black and, if used alone
on paper, appears only faintly. After standing it becomes darker and
insoluble in water, which gives it a permanent quality. To make the writing
darker and more legible at the outset, dyes are added. Modern coloured
inks and washable inks contain soluble synthetic dyes as the sole colouring
matter. The writing fades in strong light and rinses out of washable fabrics
but lasts for many years if not subjected to such effects.
Britannica Quiz
Modern printing inks are usually less fluid than writing inks.
The composition, viscosity, density, volatility, and diffusibility of ink are
variable.
Xu Daoning: Fishing in a Mountain StreamFishing in a Mountain Stream, detail of an ink
drawing on silk by Xu Daoning, 11th century.(more)
The Chinese experimented with printing at least as early as AD 500, with
inks from plant substances mixed with coloured earths and soot or
lampblack. When Johannes Gutenberg invented printing with movable type
in Germany in about 1440, inks were made by mixing varnish or
boiled linseed oil with lampblack. For more than 300 years such inks
continued to be used with little modification in their composition.
In 1772 the first patent was issued in England for making coloured inks, and
in the 19th century chemical drying agents appeared, making possible the
use of a wide variety of pigments for coloured inks. Later, varnishes of
varying stiffness were developed to make inks for different papers and
presses. Varnish was replaced by mineral oil in inks when high-speed
newspaper presses were introduced. The oil base penetrated rapidly into
newsprint and dried quickly. Water-based inks are also used, especially for
screen printing. It was not until the beginning of the 20th century that ink-
making became a complicated chemical-industrial process.
Silk screen poster for On the RocksSilk screen poster of a WPA Federal Theatre Project
presentation of George Bernard Shaw's On the Rocks (1939).(more)
The manufacture of modern inks takes into account the surface to be
imprinted, the printing process, and special requirements for the job, such
as colour, opacity, transparency, brilliance, lightfastness, surface hardness,
pliability, wettability, purity, and odourlessness. Inks for low-speed
letterpress printing—the process usually used in book production—
are compounded of carbon black, a heavy varnish, and a drier to reduce the
drying time. Many other vehicles, pigments, and modifiers may be
used. Intaglio inks are composed of petroleum naphthas, resins, and coal-tar
solvents. The intaglio printing process is used chiefly in printing
rotogravure newspaper supplements and cartons, labels, and wrappers.
Plastic materials are usually printed with aniline inks, which contain methyl
alcohol, synthetic resins, and shellac.
Introduction
Early Semitic writing
Arabic calligraphy
Indic calligraphy
Greek handwriting
Latin-alphabet handwriting
For Students
calligraphy summary
Read Next