hp workstation x2100

data sheet

the next generation of speed, power and performance Combine the latest Intel processor technology that enables support for new frequencies up to 2.6GHz with twice as much L2 cache with a broad range of ISV certified professional 2D and 3D graphics solutions. Add the expandability, manageability and reliability of HP workstations. The resulting HP x2100 is a workstation capable of delivering the speed, power and performance required by expert financial, technical and creative professionals. Now supporting high-performance 15,000 RPM SCSI hard disk drives, the HP Workstation x2100 features state of the art ultraflow heat management. Additionally, the HP x2100 has integrated LAN, allowing an additional PCI slot for your use. Configure the system that best meets your workstation needs. The HP Workstation x2100 gives you the power to invent in real time.
hp workstation x2100 feature
single Intel Pentium 4 1.9, 2.0, 2.2, 2.4 or 2.6GHz with up to 2x as much L2 cache

benefit
uses integrated chip process techno-logy allowing up to 2.6GHz; next generation processor with Intel NetBurstTM micro-architecture and Hyper Pipelined Technology puts increased power and efficiency behind demanding applications direct memory access is 3x faster than with RDRAM based Pentium III machines relationships with top Independent Software Vendors enable close collaboration, performance tuning and hardware platform certification provides RAID 1 (disk mirroring) and RAID 0 (disk striping) support

advantage
all future frequency increases will be based on this integrated chip process; higher frequencies and improved processor design provide increased floating point performance and compute power allows use of the entire memory subsystem bandwidth for greater system responsiveness and user interaction hp workstations are certified for official software support and to provide guaranteed compatibility, reliability and the best performance possible disk mirroring provides data redundancy for fault tolerance; disk striping provides high data bandwidth to and from a disk array for digital video, non-linear editing, and other applications requiring high bandwidth to disk provides hard disk space and performance needed to work on large models and multiple designs applications and workloads demanding large memory get a boost in performance due to increased bandwidth and balanced system architecture from Intel allows advanced administration and management of system components and settings increases reliability and provides hardware self-diagnosis ducts are not in the way facilitating chassis accessibility can be tailored to the varying needs of hp workstation customers faster access to the best graphics in the industry at varying performance and price points

400MHz front side bus performance for 3.2GB/sec of system bandwidth ISV certification

RAID(optional)

mass storage expandability

Ultra Wide SCSI high data throughput and up to 160GB (EIDE) or 146GB (SCSI) of storage means greater productivity high performance, dual-channel memory; large memory capacity for more demanding applications and complex designs provides unique remote and local netbased management and diagnostics integrated with hp toptools for remote administration and monitoring turbo cooling accommodates heat produced by Pentium 4, 3D graphics and SCSI disks; eliminates need for ducting configuration options allow you to add-in hardware or graphics options a wider range of graphics choices for applications that are fully supported on the platform

up to 2GB capacity RDRAM

hp toptools

hp maxilife II ultraflow heat management

build-to-order hp leadership graphics program

hp workstation x2100 technical specifications

central processor type clock frequency number of processors cache (on-chip) Intel Pentium 4 1.9, 2.0, 2.2, 2.4 or 2.6GHz 1 L1: 12KB instruction code, 8KB data L2: 256KB (1.9GHz) L2: 512KB (2.0 or higher) 3.2GB/sec PC800 RAMBUS (ECC) expandable to 2GB 4 RIMMs (2 pairs, dual channel) built-in I/O serial interface 9-pin DIN parallel interface 25-pin DIN USB (Universal Serial Bus) Series A power power supply output audio type monitors 2 ports 1 port 2 ports 320W 20-bit stereo full-duplex 18 flat panel LCD 19 flat screen 21" flat screen 24 flat screen

main memory bus bandwidth RAM type capacity memory slots operating system options Windows 2000 Professional Windows XP Red Hat Linux 7 .1
.

environmental specifications altitude operating storage temperature operating non-operating humidity operating physical dimensions height width depth net weight minimum configuration power requirements input current line frequency maximum power input professional 2D graphics ATI RADEONTM 7000 professional 3D graphics entry3D NVIDIA Quadro2 EXTM mid-range 3D ATI Fire GL TM 8800 high-end 3D NVIDIA QuadroTM4 900 XGL extreme 3D 3Dlabs Wildcat TM III 6110

3100m (10000 ft.) max 4600m (15000 ft.) max +10C to +35C (+50F to +95F) -40C to +70C (-40F to +158F) 15% to 80% (relative) 49cm (19.30 in) 21cm (8.26 in) 47cm (18.50 in) 14 kilograms (31.7lbs) 5.5 A @ 100-127V Vac 50Hz to 60Hz 492W RADEON 7000 graphics controller 32MB DDR SDRAM memory single, integrated geometry engine 32MB unified SDR graphics memory ATI R200 graphics controller 128MB unified graphics memory integrated geometry engine 128MB DDR memory to deliver outstanding graphics performance 6 geometry engines to deliver ultimate performance and the largest models 192MB graphics memory

internal storage devices (2 storage bays) integrated PCI Bus master Ultra ATA/100 MB/s controller choice of Ultra ATA/100 EIDE or Ultra 160 SCSI hard drives Ultra ATA/100 EIDE hard drives up to 2 devices, 160GB maximum (S.M.A.R.T. enabled) Ultra 160 SCSI hard drives with PCI adapter up to 2 devices, 146GB maximum (S.M.A.R.T. enabled) RAID (optional for Windows) Ultra 160 SCSI RAID - single channel expansion slots PCI 1X (full size - 5 slots available) AGP 4X Pro 20GB (7200 RPM) 40GB (7200 RPM) 80GB (7200 RPM) 18GB 36GB 73GB 36GB (10K RPM) (10K RPM) (10K RPM) (15K RPM)

stripe (2 HDD) mirror (2 HDD) PCI 2.2 32b 33MHz

SCSI device connectivity The (optional) integrated Ultra 160/m SCSI card has 4 connectors and uses 1 PCI slot: connector 1 connector 2 connector 3 connector 4 removable media floppy drive CD drive(s) / up to 2 CD devices 68-pin external connector for LVD SCSI devices 68-pin internal connector for LVD SCSI devices 68-pin internal connector for wide SE SCSI devices 50-pin internal connector for narrow SE SCSI devices integrated 3.5 floppy drive 48X CD-ROM 16X DVD, 24X/10X/40X CD-RW DVD+RW/+R/CD-RW yes 10/100Mbps (auto sensing)

networking (integrated) RJ45 LAN data rate wake-on-LAN support

HP PCs use genuine Windows Operating Systems www.Microsoft.com/piracy/howtotell

Cover screen image courtesy of SDRC. Windows, Windows NT and Windows 2000 Professional are U.S. registered trademarks of Microsoft Corporation. Intel, Pentium, and NetBurst are trademarks or registered trademarks of Intel Corporation. Rambus and RDRAM are registered trademarks of RAMBUS Inc. 3Dlabs and Wildcat are trademarks or registered trademarks of 3Dlabs Ltd., 3Dlabs Inc. Ltd., or 3Dlabs Inc in the United States and/or other countries. ATI , RADEON and Fire GL are trademarks or registered trademarks of ATI. NVIDIA, Quadro, Quadro2 EX and Quadro2 Pro are trademarks or registered trademarks of NVIDIA Corporation. Matrox is a registered trademark of Matrox Graphics Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited. Linux is a registered trademark of Linus Torvalds. Information in this document is subject to change without notice. Copyright 2002 Hewlett-Packard Company Printed in the USA October 2, 2002 5980-8732EN