OM ADV160

Owner’s Manual
SCOOPY

Please read this manual carefully before riding

ACF110CBTP
 OM ADV160

Customer Relation Section’s Information

N.C.X Company Co., Ltd pleased to inform that Our company has created Customer
Relation Section in order to help customer easier to contact to our company in case that
they have any inquiries or questions related with company such as Product, Services, or
another information.

CR Section will kindly provide the discussion, answering to all kind of inquiries, and all
customer doubts with our experienced and professional staffs.

How can you contact to CR Section?

Customer can contact to CR by the following:
Tel : 010 922 922
E-mail : cr@[Link]
Working Hours : 08:00AM-05:00PM
Working Days : Every Monday to Saturday
(except National Holidays and cr@[Link]

Company Holiday) f Honda Cambodia – NCX

[Link]
20230106100355_32K2FD100_eng_BOOK Page 1 Friday, January 06 2023 [Link] JST

This manual should be considered a permanent part of the vehicle

and should remain with the vehicle when it is resold.

This publication includes the latest production information available

before printing. Honda Motor Co., Ltd. reserves the right to make
changes at any time without notice and without incurring any
obligation.

No part of this publication may be reproduced without written

permission.

The vehicle pictured in this owner’s manual may not match your
actual vehicle.

© 2023 Honda Motor Co., Ltd.

20230106100355_32K2FD100_eng_BOOK Page 2 Friday, January 06 2023 [Link] JST

Welcome
Congratulations on your purchase of a new ● The following codes in this manual
Honda vehicle. Your selection of a Honda indicate the destination.
makes you part of a worldwide family of ● The illustrations here in are based on the
satisfied customers who appreciate Honda's ACF110CBT III CA type.
reputation for building quality into every
product. Destination Codes
Code Destination
To ensure your safety and riding pleasure:
ACF110CBT
● Read this owner's manual carefully.
● Follow all recommendations and
II CA, III CA Cambodia
procedures contained in this manual.
● Pay close attention to safety messages
contained in this manual and on the
vehicle.
20230106100355_32K2FD100_eng_BOOK Page 3 Friday, January 06 2023 [Link] JST

A Few Words About Safety

Your safety, and the safety of others, is very
3DANGER
important. Operating this vehicle safely is an
You WILL be KILLED or SERIOUSLY
important responsibility. HURT if you don’t follow instructions.
To help you make informed decisions about
safety, we have provided operating 3WARNING
procedures and other information on safety You CAN be KILLED or SERIOUSLY
labels and in this manual. This information HURT if you don’t follow instructions.
alerts you to potential hazards that could
hurt you or others. 3CAUTION
Of course, it is not practical or possible to You CAN be HURT if you don’t follow
warn you about all hazards associated with instructions.
operating or maintaining a vehicle. You must
use your own good judgement. Other important information is
provided under the following titles:
You will find important safety information in a NOTICE Information to help you avoid
variety of forms, including: damage to your vehicle, other
● Safety labels on the vehicle
property, or the environment.
● Safety Messages preceded by a safety alert
symbol and one of three signal words:
DANGER, WARNING, or CAUTION.
These signal words mean:
20230106100355_32K2FD100_eng_BOOK Page 4 Friday, January 06 2023 [Link] JST

Contents

Vehicle Safety P. 2

Operation Guide P. 16

Maintenance P. 75

Troubleshooting P. 110

Information P. 131

Specifications P. 145
20230106100355_32K2FD100_eng_BOOK Page 5 Friday, January 06 2023 [Link] JST

Vehicle Safety

This section contains important information for safe riding of your vehicle.
Please read this section carefully.

Safety Guidelines ................................................. P. 3

Image Labels......................................................... P. 6
Safety Precautions............................................... P. 8
Riding Precautions .............................................. P. 9
Accessories & Modifications........................... P. 13
Loading ................................................................ P. 14
20230106100355_32K2FD100_eng_BOOK Page 6 Friday, January 06 2023 [Link] JST

Safety Guidelines

Safety Guidelines that you and your passenger are both wearing
an approved helmet and protective apparel.

Vehicle Safety
Follow these guidelines to enhance your safety: Instruct your passenger on holding onto the
● Perform all routine and regular inspections grab rail or your waist, leaning with you in turns,
specified in this manual. and keeping their feet on the footpegs, even
● Stop the engine and keep sparks and flames when the vehicle is stopped.
away before filling the fuel tank.
● Do not run the engine in enclosed or partly
enclosed areas. Carbon monoxide in Take Time to Learn & Practice
exhaust gases is toxic and can kill you. Even if you have ridden other vehicles, practice
riding in a safe area to become familiar with
how this vehicle works and handles, and to
Always Wear a Helmet become accustomed to the vehicle's size and
It's a proven fact: helmets and protective weight.
apparel significantly reduce the number and
severity of head and other injuries. So always
wear an approved helmet and protective Ride Defensively
apparel. 2 P. 8 Always pay attention to other vehicles around
you, and do not assume that other drivers see
you. Be prepared to stop quickly or perform an
Before Riding evasive maneuver.
Make sure that you are physically fit, mentally
focused, and free of alcohol and drugs. Check
Continued 3
 20230106100355_32K2FD100_eng_BOOK Page 7 Friday, January 06 2023 [Link] JST

Safety Guidelines

Make Yourself Easy to See Keep Your Honda in Safe Condition

Make yourself more visible, especially at night, It's important to keep your vehicle properly
Vehicle Safety

by wearing bright reflective clothing, positioning maintained and in safe riding condition.
yourself so other drivers can see you, signaling Inspect your vehicle before every ride and
before turning or changing lanes, and using perform all recommended maintenance. Never
your horn when necessary. exceed load limits (2 P. 14), and do not modify
your vehicle or install accessories that would
make your vehicle unsafe (2 P. 13).
Ride within Your Limits
Never ride beyond your personal abilities or
faster than conditions warrant. Fatigue and If You are Involved in a Crash
inattention can impair your ability to use good Personal safety is your first priority. If you or
judgement and ride safely. anyone else has been injured, take time to
assess the severity of the injuries and whether it
is safe to continue riding. Call for emergency
Don't Drink or Use Drugs and Ride assistance if needed. Also follow applicable laws
Alcohol or drugs and riding don't mix. Even one and regulations if another person or vehicle is
alcoholic drink can reduce your ability to involved in the crash.
respond to changing conditions, and your
reaction time gets worse with every additional
drink. The same is true for drug use. Don't drink
or use and ride, and don't let your friends do it
either.
4
20230106100355_32K2FD100_eng_BOOK Page 8 Friday, January 06 2023 [Link] JST

Safety Guidelines

If you decide to continue riding, first turn the Never run your vehicle inside a garage or other
ignition switch to the (Off) position, and enclosure.

Vehicle Safety
evaluate the condition of your vehicle. Inspect
for fluid leaks, check the tightness of critical nuts 3WARNING
and bolts, and check the handlebar, control Running the engine of your vehicle
levers, brakes, and wheels. Ride slowly and while in an enclosed or even partially
cautiously. enclosed area can cause a rapid build-
Your vehicle may have suffered damage that is up of toxic carbon monoxide gas.
not immediately apparent. Have your vehicle
thoroughly checked at a qualified service facility
Breathing this colourless, odorless gas
as soon as possible.
can quickly cause unconsciousness and
lead to death.
Carbon Monoxide Hazard
Exhaust contains poisonous carbon monoxide, a Only run your vehicle's engine when it
colourless, odorless gas. Breathing carbon is located in a well ventilated area
monoxide can cause loss of consciousness and outdoors.
may lead to death.

If you run the engine in a confined or even

partly enclosed area, the air you breathe could
contain a dangerous amount of carbon
monoxide.
5
 20230106100355_32K2FD100_eng_BOOK Page 9 Friday, January 06 2023 [Link] JST

Image Labels

Image Labels
Vehicle Safety

The following pages describe the label

meanings. Some labels warn you of Read instructions contained in Owner's
potential hazards that could cause serious Manual carefully.
injury. Others provide important safety
information. Read this information carefully Read instructions contained in Shop Manual
and don't remove the labels. carefully. In the interest of safety, take the
vehicle to be serviced only by your dealer.
If a label comes off or becomes hard to
DANGER (with RED background)
read, contact your dealer for a replacement.
You WILL be KILLED or SERIOUSLY HURT if
you don't follow instructions.
There is a specific symbol on each label.
WARNING (with ORANGE background)
The meanings of each symbol and label are
You CAN be KILLED or SERIOUSLY HURT if
as follows.
you don't follow instructions.
CAUTION (with YELLOW background)
You CAN be HURT if you don't follow
instructions.

6
20230106100355_32K2FD100_eng_BOOK Page 10 Friday, January 06 2023 [Link] JST

Image Labels

BATTERY LABEL
DANGER

Vehicle Safety
• Keep flame and spark away from the battery. Battery
produce explosive gas that can cause explosion.
• Wear the eye protection and rubber gloves when handling
the battery, or you can get burned or lose your eyesight by
the battery electrolyte.
• Do not allow children and other people to touch a battery
unless they understand proper handling and hazards of the
battery very well.
• Handle the battery electrolyte with extreme care as it
contains dilute sulfuric acid. Contact with your skin or eyes
can burn you or cause loss of your eyesight.
• Read this manual carefully and understand it before handling
the battery. Neglect of the instructions can cause personal
injury and damage to the vehicle.
• Do not use a battery with the electrolyte at or below the
lower level mark. It can explode causing serious injury.

7
 20230106100355_32K2FD100_eng_BOOK Page 11 Friday, January 06 2023 [Link] JST

Safety Precautions

Safety Precautions ● Face shield with unobstructed field of vision

or other approved eye protection
Vehicle Safety

● Ride cautiously and keep your hands on the

handlebar and feet on the floor. 3WARNING
● Instruct your passenger to keep their hands Not wearing a helmet increases the
on the grab rail or your waist and their feet chance of serious injury or death in a
on the footpegs while riding. crash.
● Always consider the safety of your passenger,
as well as other drivers and riders.
Make sure that you and any passenger
Protective Apparel always wear an approved helmet and
Make sure that you and any passenger are protective apparel.
wearing an approved helmet, eye protection,
and high-visibility protective clothing. Avoid # Gloves
wearing loose clothes that could get caught on Full-finger leather gloves with high abrasion
any part of the vehicle. Ride defensively in resistance
response to weather and road conditions. # Boots or Riding Shoes
Sturdy boots with non-slip soles and ankle
# Helmet protection
Safety-standard certified, high-visibility, correct
size for your head # Jacket and Trousers
● Must fit comfortably but securely, with the Protective, highly visible, long-sleeved jacket
chin strap fastened and durable trousers for riding (or a protective
suit)
8
20230106100355_32K2FD100_eng_BOOK Page 12 Friday, January 06 2023 [Link] JST

Riding Precautions

Riding Precautions ● Avoid continuous braking.

u Repeated braking, such as when

Vehicle Safety
Running-in Period descending long, steep slopes can
seriously overheat the brakes, reducing
During the first 500 km (300 miles) of running,
their effectiveness.
follow these guidelines to ensure your vehicle's
● For full braking effectiveness, operate both
future reliability and performance.
the front and rear brakes together.
● Avoid full-throttle starts and rapid acceleration.
● Avoid hard braking.
● Ride conservatively. # Combi Brake
Your vehicle is equipped with a brake system
that distributes the braking force between the
Brakes front and rear brakes.
Observe the following guidelines: The distribution of the braking force applied to
● Avoid excessively hard braking. the front and rear brakes when operating the
u Sudden braking can reduce the vehicle's front brake lever only and when operating the
stability. rear brake lever only is different.
u Where possible, reduce speed before For full braking effectiveness, operate both the
turning; otherwise you risk sliding out. front and rear brakes together.
● Exercise caution on low traction surfaces.
u The tyres slip more easily on such surfaces
and braking distances are longer.

Continued 9
 20230106100355_32K2FD100_eng_BOOK Page 13 Friday, January 06 2023 [Link] JST

Riding Precautions

# Wet or Rainy Conditions II CA type

Road surfaces are slippery when wet, and wet ● To reduce the likelihood of theft, always lock
Vehicle Safety

brakes further reduce braking efficiency. the handlebar and remove the key and close
Exercise extra caution when braking in wet the shutter when leaving the vehicle
conditions. unattended.
If the brakes get wet, apply the brakes while Use of an anti-theft device is also
riding at low speed to help them dry. recommended.
III CA type
● To reduce the likelihood of theft, always lock
Parking the handlebar, lock the ignition switch
● Park on a firm, level surface. (2 P. 41) and leave your vehicle while taking
● If you must park on a slight incline or loose the Honda SMART Key with you. Deactivate
surface, park so that the vehicle cannot the Honda SMART Key system if necessary.
move or fall over. 2 P. 35
● Make sure that high-temperature parts Also set the anti-theft alarm system.
cannot come into contact with flammable
materials.
# Parking with the Side Stand or Centre
Stand
● Do not touch the engine, muffler, brakes
1. Stop the engine.
and other high-temperature parts until they
2. Using the side stand
cool down.
Push the side stand down.
Slowly lean the vehicle to the left until its
weight rests on the side stand.

10
20230106100355_32K2FD100_eng_BOOK Page 14 Friday, January 06 2023 [Link] JST

Riding Precautions

Using the centre stand 3. Turn the handlebar fully to the left.
To lower the centre stand, stand on the left u Turning the handlebar to the right

Vehicle Safety
side of the vehicle. reduces stability and may cause the
Hold the left handle grip and the left grab vehicle to fall.
rail. 4. II CA type
Press down on the tip of the centre stand Turn the ignition switch to the (Lock)
with your right foot and, simultaneously, pull position (2 P. 32) , remove the key and close
up and back. the shutter (2 P. 33).
III CA type
Left handle grip
Turn the ignition switch to the (Lock)
Grab rail position (2 P. 32) and lock the ignition
switch (2 P. 41).
Set the anti-theft alarm system. 2 P. 45
Centre stand

Continued 11
 20230106100355_32K2FD100_eng_BOOK Page 15 Friday, January 06 2023 [Link] JST

Riding Precautions

Refuelling and Fuel Guidelines

Follow these guidelines to protect the engine,
Vehicle Safety

fuel system and catalytic converter:

● Use only unleaded petrol.
● Use the recommended octane number.
Using lower octane petrol will result in
decreased engine performance.
● Do not use fuels containing a high
concentration of alcohol. 2 P. 143
● Do not use stale or contaminated petrol or
an oil/petrol mixture.
● Avoid getting dirt or water in the fuel tank.

12
20230106100355_32K2FD100_eng_BOOK Page 16 Friday, January 06 2023 [Link] JST

Accessories & Modifications

Accessories & 3WARNING

Modifications

Vehicle Safety
Improper accessories or modifications
We strongly advise that you do not add any can cause a crash in which you can be
accessories that were not specifically designed seriously hurt or killed.
for your vehicle by Honda or make
modifications to your vehicle from its original Follow all instructions in this owner's
design. Doing so can make it unsafe. manual regarding accessories and
Modifying your vehicle may also void your modifications.
warranty and make your vehicle illegal to
operate on public roads. Before deciding to Do not pull a trailer with, or attach a sidecar to,
install accessories on your vehicle, be certain your vehicle. Your vehicle was not designed for
the modification is safe and legal. these attachments, and their use can seriously
impair your vehicle's handling.

13
 20230106100355_32K2FD100_eng_BOOK Page 17 Friday, January 06 2023 [Link] JST

Loading

Loading 3WARNING
Vehicle Safety

● Carrying extra weight affects your vehicle's Overloading or improper loading can
handling, braking and stability.
cause a crash and you can be seriously
Always ride at a safe speed for the load you
hurt or killed.
are carrying.
● Avoid carrying an excessive load and keep
within specified load limits. Follow all load limits and other loading
Maximum weight capacity / Maximum guidelines in this manual.
luggage weight 2 P. 145
● Tie all luggage securely, evenly balanced,
and close to the centre of the vehicle.
● Do not place objects near the lights or the
muffler.

14
20230106100355_32K2FD100_eng_BOOK Page 18 Friday, January 06 2023 [Link] JST

Vehicle Safety
15
 20230106100355_32K2FD100_eng_BOOK Page 19 Friday, January 06 2023 [Link] JST

Basic Operation Flow

# Pre-ride Inspection (P.81)
Carefully inspect your vehicle to # Acceleration (P.65)
Operation Guide

make sure that it is safe to ride. Apply throttle gradually.

Obey the speed limit.

How to use basic features.

• Instruments (P.22) # Starting the Engine (P.60)
• Indicators (P.28)
• Switches (P.30)
Start and warm the engine. # Starting the
• Steering Lock (P.32)
Avoid revving the engine. Vehicle
• Rear Brake Lock (P.55) (P.64)
• Idling Stop System (P.56)
• USB Socket (P.68) Before pulling away, indicate
• II CA type Shutter (P.33) your direction with the turn
• III CA type signal switch, and check for
Honda SMART Key System (P.34) oncoming traffic.
• Anti-theft Alarm System (P.44)
• Answer Back System (P.49)

16
20230106100355_32K2FD100_eng_BOOK Page 20 Friday, January 06 2023 [Link] JST

# Braking (P.65)
Close the throttle and apply the
#
Parking (P.10)
Park on a firm level surface. Use
front and rear brakes together.

Operation Guide
the stand, lock the steering, and
u The brakelight will indicate that close the shutter.
you have applied the brakes.

# Stopping
If pulling off the road, signal early
enough to show traffic that you are
pulling over, and pull over smoothly.
# Refuelling (P.66)
# Turning Corners
Do your braking
before entering
corners.
Gradually reapply throttle
when exiting turn.

17
 20230106100355_32K2FD100_eng_BOOK Page 21 Friday, January 06 2023 [Link] JST

Parts Location
II CA type Document bag (P.72)
Tool (P.72)
Helmet holder (P.71)
Throttle grip (P.106)
Operation Guide

Front brake fluid reservoir

(P.99)

Right inner rack (P.73)

Hook (P.74)

Battery (P.92)
Fuse box (P.129)

Engine oil fill cap/dipstick (P.97)

18
20230106100355_32K2FD100_eng_BOOK Page 22 Friday, January 06 2023 [Link] JST

Rear brake lock lever (P.55)

Rear brake lever (P.101)
Left inner rack (P.73)

Operation Guide
USB socket (P.68)
Helmet holder (P.71)
Seat (P.70)
Centre compartment (P.72)

Fuel fill cap (P.66)

Kick starter (P.60)

Centre stand (P.11)

Side stand (P.105)

Continued 19
 20230106100355_32K2FD100_eng_BOOK Page 23 Friday, January 06 2023 [Link] JST

Parts Location (Continued)

III CA type Document bag (P.72)
Tool (P.72)
Helmet holder (P.71)
Throttle grip (P.106)
Operation Guide

Front brake fluid reservoir

(P.99)

Right inner rack (P.73)

Hook (P.74)

Battery (P.92)
Fuse box (P.129)

Engine oil fill cap/dipstick (P.97)

20
20230106100355_32K2FD100_eng_BOOK Page 24 Friday, January 06 2023 [Link] JST

Rear brake lock lever (P.55)

Rear brake lever (P.101)
Left inner rack (P.73)

Operation Guide
USB socket (P.68)
Helmet holder (P.71)
Seat (P.70)
Centre compartment (P.72)
Fuel fill cap (P.66)

Centre stand (P.11)

Side stand (P.105)

21
 20230106100355_32K2FD100_eng_BOOK Page 25 Friday, January 06 2023 [Link] JST

Instruments
Operation Guide

Speedometer

MODE button
Display Check
When the ignition switch is turned to the (On) position, the speedometer needle swings to the
maximum scale on the dial once, all the mode and digital segments will show. If any parts of
these displays do not come on when it should, have your dealer check for problems.

22
20230106100355_32K2FD100_eng_BOOK Page 26 Friday, January 06 2023 [Link] JST

Clock (12-hour display)

To set the clock : (P.27)

Operation Guide
Fuel gauge
Remaining fuel when only 1st (E) segment left:
approximately 1.58 L (0.34 US gal, 0.29 Imp gal)
This segment flashes when the fuel decreases
further.
Total odometer [TOTAL] (P.25) /
Tripmeter [TRIP] (P.25) /
Instant fuel mileage (P.25) /
Average fuel mileage [AVG] (P.25)
If the fuel gauge indicator flashes in a
repeat pattern or turns off: (P.114)

Continued 23
 20230106100355_32K2FD100_eng_BOOK Page 27 Friday, January 06 2023 [Link] JST

Instruments (Continued)
u When the running distance reaches about
1,000 km (600 miles) : Reset the indicator for
OIL CHANGE indicator
the 1st time.
u When the running distance reaches about
Operation Guide

every 6,000 km (4,000 miles) after the 1st

time resetting : After changing the engine
oil, be sure to reset the indicator.
u The indicator does not go off until it is reset.
u If the oil is changed before the oil change
indicator comes on, be sure to reset the oil
change indicator after changing the oil.
OIL CHANGE indicator When resetting the indicator, the indicator
Comes on when the distance reaches about will appear for 2 seconds, then disappear.
1,000 km (600 miles) for the first time and
every 6,000 km (4,000 miles) after resetting
the indicator.

To reset the indicator, press and hold MODE

button while turning the ignition switch to the
(On) position, and keep hold MODE button
for more than 3 seconds.

24
20230106100355_32K2FD100_eng_BOOK Page 28 Friday, January 06 2023 [Link] JST

Total odometer [TOTAL] Average fuel mileage [AVG]

Total distance ridden. When “------” is Displays the average fuel mileage since the
displayed, go to your dealer for service. selected tripmeter was reset.

Operation Guide
The average fuel mileage will be calculated
Trip meter [TRIP] based on value displayed on the tripmeter.
Distance ridden since tripmeter was reset When the tripmete is reset, average fuel
(press and hold the MODE button to reset to mileage will also reset.
0.0 km/mile).
When “-----.-” is displayed, go to your dealer Display range: 0.0 to 299.9 km/L
for service. More than 299.9 km/L: “299.9” is displayed.
● When the tripmeter is reset: “---.-” is
Instant fuel mileage displayed.
Display range: 0.0 to 299.9 km/L When “---.-” is displayed except for the
More than 299.9 km/L: “299.9” is displayed. abovementioned cases, go to your dealer for
When “---.-” is displayed, go to your dealer service.
for service.

Continued 25
 20230106100355_32K2FD100_eng_BOOK Page 29 Friday, January 06 2023 [Link] JST

Instruments (Continued)
Switching the display
The MODE button switches the Total odometer, Tripmeter, Instant fuel mileage and Average
fuel mileage.
Operation Guide

Total odometer Tripmeter Instant fuel mileage Average fuel mileage

Press the MODE button

26
20230106100355_32K2FD100_eng_BOOK Page 30 Friday, January 06 2023 [Link] JST

To set the clock : e Press and hold MODE button. The minute
a Turn the ignition switch to the (On) digits start flashing.
position.
b Select the Total odometer. (P.26)

Operation Guide
c Press and hold the MODE button until the
hour digits start flashing.

f Press MODE button until the desired minute

is displayed.

d Press MODE button until the desired hour is

displayed.

g Press and hold MODE button until the

display stops flashing. The clock is set.
u The time can also be set by turning the
ignition switch to the (Off) position.
u The display will stop flashing
automatically and the adjustment will be
cancelled if the button is not pressed for
about 30 seconds.

27
 20230106100355_32K2FD100_eng_BOOK Page 31 Friday, January 06 2023 [Link] JST

Indicators
If one of these indicators does not come on when it should, have your dealer check
for problems.
High beam indicator
Operation Guide

Turn signal indicator

PGM-FI
(Programmed Fuel Injection)
malfunction indicator lamp (MIL)
Comes on briefly when the ignition switch is
turned to the (On) position.
If it comes on while engine is running: (P.112)

Idling Stop indicator

Comes on briefly when the Idling Stop
switch in the (Idling Stop) with the
ignition switch turned on.
Idling Stop system: (P.56)

28
20230106100355_32K2FD100_eng_BOOK Page 32 Friday, January 06 2023 [Link] JST

ECO indicator
When fuel consumption improves the ECO
indicator will come on. If the fuel consumption

Operation Guide
continues to improve the ECO indicator will be
brighter.
u When the vehicle comes to a stop, the ECO
indicator will turn off.
III CA type
Honda SMART Key indicator
Comes on when vehicle and Honda SMART Key
verification is completed, and the ignition switch
can be operated. Goes off when the ignition
switch is turned to the (On) position.
When the Honda SMART Key indicator
III CA type flashes: (P.118)
Battery Charging Condition
III CA type
indicator
When the Battery Charging Alarm indicator
Condition indicator on : (P.112) Anti-theft Alarm System: (P.44)

29
 20230106100355_32K2FD100_eng_BOOK Page 33 Friday, January 06 2023 [Link] JST

Switches

Idling stop switch

Operation Guide

• (Idling Stop) : The Idling Stop

system is on.
• (Idling) : The Idling Stop system is
off.
Idling Stop system: (P.56)

Headlight switch
• : Headlight, taillight, position
Turn signal switch light, license plate light on.
u Pressing the switch turns • : Headlight, taillight, position
the turn signal off.
light, license plate light off.
Horn button
Headlight dimmer switch
Start button
• : High beam
• : Low beam

30
20230106100355_32K2FD100_eng_BOOK Page 34 Friday, January 06 2023 [Link] JST

Ignition switch III CA type

Switches the electrical system (On)
on/off, locks the steering. Turns electrical system on

Operation Guide
II CA type for starting/riding.
Key can be removed when in the (Off) (Lock) Locks steering.
or (Lock) position.
(Off) Turns engine off.
SH
PU

III CA type
To unlock the ignition switch. (P.39) SEAT
Operates the seat opener
switch.
II CA type III CA type
(On) Alarm/Answer back
Turns electrical system on button
for starting/riding. Anti-theft Alarm System:
SEAT (P.44)
Operates the seat opener switch. Answer Back System:
(Lock) Locks steering. (P.49)
ON/OFF button
(Off) Turns engines off.

Continued 31
 20230106100355_32K2FD100_eng_BOOK Page 35 Friday, January 06 2023 [Link] JST

Switches (Continued)
Steering Lock # Locking
Lock the steering when parking to help a Turn the handlebars all the way to the left or
prevent theft. right.
Operation Guide

A U-shaped wheel lock or similar device is b Push the ignition switch in, and turn it to the
also recommended. (Lock) position.
u Jiggle the handlebar if the lock is difficult
to engage.
III CA type
a u To unlock the ignition switch. (P.39)
c III CA type
Lock the ignition switch. (P.41)
Ignition Ignition II CA type
switch key
Remove the ignition key.
III CA type II CA type # Unlocking
Push III CA type
b Push the ignition switch in, and turn it to the
b PU
SH

(Off) position.
Push Turn Turn u To unlock the ignition switch. (P.39)
II CA type
Insert the key, push it in, and turn the ignition
switch to the (Off) position.
32
20230106100355_32K2FD100_eng_BOOK Page 36 Friday, January 06 2023 [Link] JST

Shutter # Close
II CA type a Remove the ignition key from the ignition
The ignition switch for this vehicle is switch.

Operation Guide
equipped with a shutter. After parking the b Align the projection of the shutter key with
vehicle, close the shutter for theft prevention. the slot of the shutter, and turn the shutter
key counterclockwise.
u You can also close the shutter by moving
the knob upward without the shutter key.
Open Knob
c Remove the key.
Close
# Open
Close Align the projection of the shutter key with
the slot of the shutter, and turn the shutter
Shutter key key clockwise.
Ignition
key

Slot
Projection

33
 20230106100355_32K2FD100_eng_BOOK Page 37 Friday, January 06 2023 [Link] JST

Honda SMART Key System

III CA type
The Honda SMART Key system allows you to
operate the main switch without inserting a
Operation Guide

key into a keyhole.

The system runs a two-way authentication
between the vehicle and the Honda SMART
Key to verify if it is the registered Honda
SMART Key.

The Honda SMART Key system uses low-

intensity radio waves. It may affect medical
equipment such as a cardiac pacemaker.

34
20230106100355_32K2FD100_eng_BOOK Page 38 Friday, January 06 2023 [Link] JST

Switching the Honda SMART Key LED

System

# To switch the Honda SMART Key

Operation Guide
system to activation or deactivation
Press the ON/OFF button until the Honda
SMART Key LED changes colour.

# To check the Honda SMART Key ON/OFF button

system status
Lightly press the ON/OFF button. The Honda
SMART Key LED will show the status. When
the Honda SMART Key LED is:
Green: Honda SMART Key
(active) system authentication
can be performed.
Red: Honda SMART Key
(inactive) system authentication
cannot be performed.

Continued 35
 20230106100355_32K2FD100_eng_BOOK Page 39 Friday, January 06 2023 [Link] JST

Honda SMART Key System (Continued)

Operating Range • When the Honda SMART Key comes into
The operating range varies when the ignition contact with or is covered by metal
switch is locked or unlocked. objects.
Operation Guide

The Honda SMART Key system uses low-

intensity radio waves. Therefore, the
operating range may be wider or narrower,
or the Honda SMART Key system may not
work properly in the following situations:
• When the Honda SMART Key battery is
depleted.
• When there are facilities nearby that
generate strong radio waves or noise,
such as TV towers, power stations, radio
stations, or airports.
• When you carry the Honda SMART Key
with a laptop or wireless communication
device such as a radio or mobile phone.

36
20230106100355_32K2FD100_eng_BOOK Page 40 Friday, January 06 2023 [Link] JST

# When the ignition switch is unlocked: # When the ignition switch is locked:
The system can be operated within the The system can be operated within the
shaded area shown in the illustration. shaded area shown in the illustration.

Operation Guide
About 2 m (6.6 ft)

Continued 37
 20230106100355_32K2FD100_eng_BOOK Page 41 Friday, January 06 2023 [Link] JST

Honda SMART Key System (Continued)

Anyone can unlock the ignition switch and Anyone in possession of the Honda SMART
start the engine if your Honda SMART Key is Key can perform the following operations if
within operating range of your vehicle, even the Honda SMART Key is within operating
Operation Guide

if you are on the other side of a wall or range:

window. If you are away from your vehicle ● Starting the engine
but your Honda SMART Key is still within ● Unlocking the ignition switch
operating range, deactivate the Honda ● Unlocking the seat lock
SMART Key system. ● Unlocking the steering lock
To switching the Honda SMART Key You should always keep the Honda SMART
system (P.35) Key on your person after you get on and off
the vehicle or while riding.
Do not place the Honda SMART key in the
centre compartment or inner rack.

38
20230106100355_32K2FD100_eng_BOOK Page 42 Friday, January 06 2023 [Link] JST

If the ignition switch is in the (On) position, Switching the ignition switch
the vehicle can be operated even by a
person who does not have a verified Honda
# To Unlock the Ignition Switch
a Make sure that the Honda SMART Key

Operation Guide
SMART Key. system is active. (P.35)
Whenever you leave your vehicle, lock the b To authenticate the Honda SMART Key
steering and lock the ignition switch. system, push the ignition switch.
(P.41) u When properly authenticated and the
Make sure the Honda SMART Key indicator ignition switch is unlocked, the Honda
goes off, all turn signals flash once, and SMART Key indicator comes on. The
buzzer rings at this time. buzzer also rings 2 times at this time.
u The buzzer sound can be cancelled.
(P.42)

Continued 39
 20230106100355_32K2FD100_eng_BOOK Page 43 Friday, January 06 2023 [Link] JST

Honda SMART Key System (Continued)

c Turn the ignition switch to the (On) position When the Honda SMART Key system
while the Honda SMART Key indicator does not work properly (P.118)
comes on. If someone without the Honda SMART Key
u If you do not turn the ignition switch to
Operation Guide

tries to turn the ignition switch, the ignition

the (On) position within 20 seconds switch rotates freely. If you notice the ignition
after pushing the ignition switch in, the switch is in a different position, turn the
Honda SMART Key indicator will go off, ignition switch to the original ( (Off) or
the turn signals flash 1 time and then the (Lock)) position.
ignition switch will be locked. The buzzer
also rings at this time.
Honda SMART Key

Honda
SMART Key
indicator

Ignition switch

40
20230106100355_32K2FD100_eng_BOOK Page 44 Friday, January 06 2023 [Link] JST

# To Lock the Ignition Switch When the Honda SMART Key system
a Turn the ignition switch to the SEAT, (Off) does not work properly (P.118)
or (Lock) position. Ignition switch

Operation Guide
b Lock the ignition switch by doing one of the
following:
● Leave the operating range with the
Honda SMART Key.
(Lock)
● Push the ignition switch. (On) SH
● Wait for approximately 20 seconds PU

SEAT (Off)
after turning the ignition switch from
(On) to SEAT, (Off) or (Lock)
position. Ignition
● Switch the Honda SMART Key system switch
to inactive. (P.35)
c Make sure that the Honda SMART Key
indicator goes off, the turn signals flash
once,and the buzzer rings 1 time. This
indicates that the ignition switch is locked.
u The buzzer sound can be cancelled.
(P.42)

Continued 41
 20230106100355_32K2FD100_eng_BOOK Page 45 Friday, January 06 2023 [Link] JST

Honda SMART Key System (Continued)

Always make sure the ignition switch position # Switch the Buzzer Sound When the
is in the (Off) or (Lock) position when Ignition Switch is Locked/Unlocked
you leave your vehicle. Enable
Operation Guide

a Switch the Honda SMART Key system to

When the ignition switch is locked in the inactive. (P.35)
SEAT position, the ignition switch can be b Lightly press the ON/OFF button. The red
turned to the (Off) position only once. Honda SMART Key LED comes on.
c While the red LED is on, press the Alarm/
When the ignition switch is locked in the Answer back button.
(Off) position, the steering cannot be locked. u The red LED starts blinking when the
To lock the steering, unlock the ignition buzzer sound is properly enabled.
switch.
Disable
a Switch the Honda SMART Key system to
inactive. (P.35)
b Lightly press the ON/OFF button. The red
the Honda SMART Key LED blinks.

42
20230106100355_32K2FD100_eng_BOOK Page 46 Friday, January 06 2023 [Link] JST

c While the red LED is blinking, press the

Alarm/Answer back button.
u The red LED stops blinking but stays on
when the buzzer sound is properly

Operation Guide
disabled.

43
 20230106100355_32K2FD100_eng_BOOK Page 47 Friday, January 06 2023 [Link] JST

Anti-theft Alarm System

III CA type
The anti-theft alarm system is a device to
reduce the likelihood of theft. When the
Operation Guide

sensor detects vibration or movement with

the ignition switch in the (Off) or (Lock)
position and the system is set, the alarm is
activated.

The alarm sounds and the turn signals blink

for about 10 seconds when the anti-theft
alarm system detects vibration caused by
contact or movement.

The alarm sounds and the turn signals and

alarm indicator blink for about 60 seconds
when the anti-theft alarm system detects a
substantial change in the vehicle posture.
After the alarm sounds for 60 seconds, the
anti-theft alarm system will be reset in that
posture.

44
20230106100355_32K2FD100_eng_BOOK Page 48 Friday, January 06 2023 [Link] JST

If the ignition switch is left in the (Off) or # Setting the Anti-theft Alarm System
the (Lock) position for more than 10 days, a Turn the ignition switch to the (Off)
the anti-theft alarm system will no longer position or the (Lock) position.

Operation Guide
operate. b Press the Alarm/Answer back button. Within
When the system is active and the vehicle a second, the turn signals blink and the
receives a signal from pressing the Alarm/ buzzer rings 1 time. After 2.5 seconds, the
Answer back button, system activation will be buzzer rings 1 time and the alarm indicator
extended for 10 days. [Link] anti-theft alarm system is
To reset the system, turn the ignition switch activated.
to the (On) position once. The alarm indicator flashes while the anti-
theft alarm system is activated.
The anti-theft alarm system uses low- Alarm/Answer back button
intensity radio waves. It may affect medical
equipment such as a cardiac pacemaker.

When the battery in the vehicle is weak, the

anti-theft alarm system may not function.

Alarm indicator

Continued 45
 20230106100355_32K2FD100_eng_BOOK Page 49 Friday, January 06 2023 [Link] JST

Anti-theft Alarm System (Continued)

# Cancelling the Anti-theft Alarm # Stopping the Anti-theft Alarm
System Activation
To cancel the anti-theft alarm system, unlock To stop the anti-theft alarm activation, do
Operation Guide

the ignition switch. (P.39) one of the following:

Ignition ● Press the Alarm/Answer back button on
switch the Honda SMART Key.
u The anti-theft alarm system returns to
the activated.
● Unlock the ignition switch. (P.39)
u After stopping the anti-theft alarm
system will be cancelled.
u The ignition switch is unlocked, the
buzzer rings 2 times and the alarm
indicator goes off.

Alarm/Answer
back button

46
20230106100355_32K2FD100_eng_BOOK Page 50 Friday, January 06 2023 [Link] JST

# Adjusting the Sensitivity of Anti-theft c Push and hold the ignition switch for more
Alarm System than 4 seconds while the Honda SMART Key
You can select from 3 sensitivity levels for the indicator comes on.
The Honda SMART Key indicator starts

Operation Guide
anti-theft alarm system.
blinking.
Alarm/Answer back Ignition switch d Push the ignition switch while the Honda
button SMART Key indicator is blinking. The Honda
SMART Key indicator switches from blinking
to lighting.
u If the ignition switch is not pressed within
5 seconds, this mode will be cancelled
PU
SH
after the Honda SMART Key indicator
stops blinking and buzzer rings 1 time.
Try step b and follow the procedure
a Make sure that the Honda SMART Key
again.
system is active. (P.35)
e Repeat the following 3 times:
b Push the ignition switch to authenticate the
Press the Alarm/Answer back button on
Honda SMART Key system. (P.39)
the Honda SMART Key 4 times and the
The Honda SMART Key indicator comes
ignition switch 1 time.
on.

Continued 47
 20230106100355_32K2FD100_eng_BOOK Page 51 Friday, January 06 2023 [Link] JST

Anti-theft Alarm System (Continued)

u When the ignition switch is pressed, the The Honda SMART Key indicator comes
Honda SMART Key indicator goes off, on while setting.
and the buzzer sounds. When the g The sensitivity level is also set if you push
Honda SMART Key indicator light again,
Operation Guide

and hold the ignition switch for about 2

do the next input. seconds before the Honda SMART Key
u When the Alarm/Answer back button is indicator starts blinking.
pressed, the Honda SMART Key LED u Wait for about 10 seconds until the
comes on. Make sure the LED goes off Honda SMART Key indicator starts
before pressing the button again. blinking, and buzzer rings once. The
u If the Alarm/Answer back button is not sensitivity level is set.
pressed within 1 minute, this mode will
be cancelled after the Honda SMART Key
indicator starts blinking and buzzer rings # If the Anti-Theft Alarm System Does
1 time. Not Operate Properly
Try step b and follow the procedure If any of the following situations arise, battery
again. ((P.92) ) in the vehicle is discharged or
f Press the Alarm/Answer back button to there is a system problem. Remove the
select from 3 sensitivity levels. battery and see your dealer.
3 alarm rings: high sensitivity • The alarm does not ring.
2 alarm rings: medium sensitivity • The alarm rings but fades out.
1 alarm ring: low sensitivity • The alarm system does not stop.

48
20230106100355_32K2FD100_eng_BOOK Page 52 Friday, January 06 2023 [Link] JST

Answer Back System

III CA type
Alarm/Answer
The answer back system is a device to find back button
the location of your vehicle.

Operation Guide
When the immobilizer is active and you press
the Alarm/Answer back button on the Honda
SMART Key with the ignition switch in the
(Off) or (Lock) position, the turn signals
light, the buzzer rings, informing you of your
vehicle's location.

The answer back system uses low-intensity

radio waves. It may affect medical equipment
such as a cardiac pacemaker.

Continued 49
 20230106100355_32K2FD100_eng_BOOK Page 53 Friday, January 06 2023 [Link] JST

Answer Back System (Continued)

# Operation # Adjusting the Answer Back Buzzer
Press the Alarm/Answer back button on the Sound Volume Level
Honda SMART Key. You can select 3 buzzer sound volume levels.
Operation Guide

u Answer back system will not function when Alarm/Answer back button Ignition
the ignition switch is in the (On) position.
switch
u The answer back system will not function
when the alarm is not activated.
If the ignition switch is left in the (Off) or
(Lock) position for more than 10 days, the
answer back system will no longer operate. PU
SH

When the system is active and the vehicle

receives a signal from pressing the Alarm/
a Make sure that the Honda SMART Key
Answer back button, system activation will be
system is active. (P.35)
extended for 10 [Link] reset the system,
b Push the ignition switch to authenticate the
unlock the ignition switch and turn the
Honda SMART Key system. (P.39)
ignition switch to the (On) position once.
u The Honda SMART Key indicator flashes.
u To unlock the ignition switch (P.39)

When the battery in the vehicle is weak, the

answer back system may not function.

50
20230106100355_32K2FD100_eng_BOOK Page 54 Friday, January 06 2023 [Link] JST

c Push the ignition switch while the Honda indicator stops blinking and buzzer rings
SMART Key indicator is blinking. The Honda 1 time.
SMART Key Indicator switches from blinking Try step b and follow the procedure
to lighting

Operation Guide
again.
u If the ignition switch is not pressed within e Press the Alarm/Answer back button to
5 seconds, this mode will be cancelled select from 3 levels for the sound volume.
after the Honda SMART Key indicator The Honda SMART Key indicator comes on
stops blinking and buzzer rings 1 time. while setting.
Try step b and follow the procedure f Wait for about 10 seconds until the Honda
again. SMART Key indicator starts blinking and
d Repeat the following 3 times: buzzer rings once. The sound volume level
Press the Alarm/Answer back button on is set.
the Honda SMART Key 2 times and the u The sound volume level is also set if you
ignition switch 1 time. push and hold the ignition switch for
u When the Alarm/Answer back button is about 2 seconds before the Honda
pressed, the Honda SMART Key LED SMART Key indicator starts blinking.
comes on. Make sure the LED goes off
before pressing the button again.
u If the Alarm/Answer back button is not
pressed within 1 minute, this mode will
be cancelled after the Honda SMART Key

Continued 51
 20230106100355_32K2FD100_eng_BOOK Page 55 Friday, January 06 2023 [Link] JST

Answer Back System (Continued)

# Changing the Answer Back Buzzer The Honda SMART Key indicator flashes.
Sound Pattern d Push the ignition switch while the Honda
You can select 3 buzzer sound patterns. SMART Key indicator blinking.
The Honda SMART Key Indicator switches
Operation Guide

Alarm/Answer back button Ignition from blinking to lighting.

switch u If the ignition switch is not pressed within
5 seconds, this mode will be cancelled
after the Honda SMART Key indicator
stops blinking and buzzer rings 1 time.
SH
Try step b and follow the procedure
again.
PU

e Repeat the following 3 times:

a Make sure that the Honda SMART Key Press the Alarm/Answer back button on
system is active. (P.35) the Honda SMART Key 3 times and the
b Push the ignition switch to authenticate the start button 1 time.
Honda SMART Key system. (P.39)
The Honda SMART Key indicator comes
on.
c Push and hold the ignition switch for more
than 4 seconds while the Honda SMART Key
indicator comes on.

52
20230106100355_32K2FD100_eng_BOOK Page 56 Friday, January 06 2023 [Link] JST

u When the ignition switch is pressed, the f Press the Alarm/Answer back button to
Honda SMART Key indicator goes off, select from 3 buzzer sound patterns. The
and the buzzer sounds. When the Honda SMART Key indicator comes on while
Honda SMART Key indicator comes on setting.

Operation Guide
again, do the next input. g The sound pattern is also set if you push
u When the ignition switch is pressed,the and hold the start button for about 2
Honda SMART Key LED comes on. Make seconds before the Honda SMART Key
sure the LED goes off before pressing indicator starts blinking.
the button again. u Wait for about 10 seconds until the
u If the Alarm/Answer back button is not Honda SMART Key indicator starts
pressed within 1 minute, this mode will blinking, and buzzer rings once. The
be cancelled after the Honda SMART Key sound pattern is set.
indicator stops blinking and buzzer rings
1 time.
Try step b and follow the procedure
again.
u If you press the Alarm/Answer button
the worng number of times before you
repeat the procedure 3 times, then
repeat the procedure 3 times again.

Continued 53
 20230106100355_32K2FD100_eng_BOOK Page 57 Friday, January 06 2023 [Link] JST

Answer Back System (Continued)

# Temporary Silence Mode
Temporary silence mode is the immediate
way to turn off the answer back system
Operation Guide

buzzer sound.

Enable:
Press and hold the Alarm/Answer back
button for 2 seconds, the Honda SMART Key
LED changed to red.

Disable:
Re-press and hold the Alarm/Answer back
button for 2 seconds, the Honda SMART Key
LED changed to green.

54
20230106100355_32K2FD100_eng_BOOK Page 58 Friday, January 06 2023 [Link] JST

Rear Brake Lock

Be sure the rear brake lock is applied while # Unlocking
starting and warming up the engine. Squeeze the rear brake lever.
u Before riding, make sure that the rear brake
# Locking

Operation Guide
lock is fully released so there is no drag on
Squeeze the rear brake lever and set the rear
the rear wheel.
brake lock lever.
u The rear brake lock will not function if the
rear brake is not adjusted properly.
(P.102)

Rear brake
lock lever

Rear brake lever

55
 20230106100355_32K2FD100_eng_BOOK Page 59 Friday, January 06 2023 [Link] JST

Idling Stop System

Idling Stop system is designed to help reduce Activation of the Idling Stop System
the fuel consumption and noise, by idling The Idling Stop system becomes ready to
stop while making a stop such as waiting at stop the engine and Idling Stop indicator
Operation Guide

an intersection. comes on when the following requirements

are satisfied with the Idling Stop switch in the
(Idling Stop) position:
# Switching the Idling Stop System On • side stand is up
or Off
Switches the Idling Stop system on or off • start the engine by pressing the start
using the Idling Stop switch. button
• ON: (Idling Stop) • warm up the engine enough
u Idling Stop indicator comes on when the • ride the vehicle at speeds over 10 km/h (6
Idling Stop system becomes ready to mph)
stop the engine while riding. Idling Stop
indicator flashes when the engine is
stopped by the Idling Stop system.
• OFF: (Idling)
u Idling Stop indicator does not come on
when the Idling Stop system is off.

56
20230106100355_32K2FD100_eng_BOOK Page 60 Friday, January 06 2023 [Link] JST

# Idling Stop Indicator Does Not Come Stopping the engine by the Idling Stop
On: (P.115) System
Idling Stop switch Idling Stop indicator The engine stops and Idling Stop indicator

Operation Guide
changes to flash after you close the throttle
completely and stop the vehicle while the
Idling Stop indicator is on.
u While the engine is stopped by the Idling
Stop system, if you press the Idling Stop
switch to (Idling), the Idling Stop system
will be cancelled. The engine will not restart
even when you open the throttle.

Idling Stop indicator

Continued 57
 20230106100355_32K2FD100_eng_BOOK Page 61 Friday, January 06 2023 [Link] JST

Idling Stop System (Continued)

Safety Precaution for the Idling Stop System Restarting the Engine
Do not go away from the vehicle while the Check that the Idling Stop indicator is
Idling Stop indicator is flashing. When you go flashing, and then open the throttle.
Operation Guide

away from the vehicle, always turn the u If it is not flashing, you can't restart the
ignition switch to the (Off) position. engine with the Idling Stop system, even if
u The engine may start unexpectedly if the you open the throttle.
throttle is opened. u While the engine is stopped by the Idling
Stop system, if you operate the side stand,
# Engine is Not Stopped by the Idling the flashing Idling Stop indicator turns off or
Stop System While the Idling Stop stops flashing and stays on, then the engine
Indicator is On: (P.115) will not restart even when you open the
NOTICE
throttle.
Stopping by the Idling Stop system for a long
time may cause battery discharge. # Engine Does Not Start Even If the
Throttle is Opened: (P.117)

58
20230106100355_32K2FD100_eng_BOOK Page 62 Friday, January 06 2023 [Link] JST

NOTICE
Headlight stays on after the engine is stopped by
the Idling Stop system. The battery may
discharge and you may not be able to restart

Operation Guide
engine.
When the battery is weak, switch the Idling Stop
switch to (Idling) and do not to use the Idling
Stop system. See your dealer to check the
battery.

See your dealer for checking the battery as

specified in the maintenance schedule.

# Maintenance Schedule: (P.78)

59
 20230106100355_32K2FD100_eng_BOOK Page 63 Friday, January 06 2023 [Link] JST

Starting the Engine

Start your engine using the following NOTICE
procedure, regardless of whether the engine • If the engine does not start within 5 seconds,
is cold or warm. turn the ignition switch to the (Off)
position and wait 10 seconds before trying to
Operation Guide

start the engine again to recover battery

This vehicle is equipped with a side stand voltage.
ignition cut-off system. • Extended fast idling and revving the engine
u If the side stand is down, the engine cannot can damage the engine and the exhaust
be started. system.
u If you lower the side stand with the engine • The engine will not start if the throttle is fully
running, it will automatically shut off. open.
II CA type
III CA type • Do not operate the kickstarter while the
This vehicle is equipped with a Honda engine is running as engine damage could
result. Do not apply excessive force on the
SMART Key system. Always keep Honda
kickstarter.
SMART Key on you when you ride the
• Fold up the kickstarter after the kickstarter is
vehicle. (P.36) returned to the pedal stop.

60
20230106100355_32K2FD100_eng_BOOK Page 64 Friday, January 06 2023 [Link] JST

a Place the vehicle on its centre stand. c Squeeze the rear brake lever.
b Turn the ignition switch to the (On) u The starter motor will only work when
position. the rear brake lever is squeezed and the
side stand is up.

Operation Guide
III CA type
u To unlock the ignition switch. (P.39)

III CA type II CA type

c
b

Continued 61
 20230106100355_32K2FD100_eng_BOOK Page 65 Friday, January 06 2023 [Link] JST

Starting the Engine (Continued)

d Using the start button Using the kickstarter
With the throttle completely closed, press II CA type
the start button. With the throttle completely closed,
Operation Guide

operate the kickstarter starting from the

top of the stroke, kick through to the
bottom with a rapid, continuous motion.

62
20230106100355_32K2FD100_eng_BOOK Page 66 Friday, January 06 2023 [Link] JST

If you cannot start the engine: If the engine does not start:
Open the throttle slightly (about 3 mm [0.1 Using the start button
in], without freeplay). a Open the throttle fully and press the start

Operation Guide
button for 5 seconds.
About 3 mm (0.1 in), without freeplay b Follow the normal starting procedure.
c If the engine starts, open the throttle slightly
if idling is unstable.
d If the engine does not start, wait 10 seconds
before trying steps a & b again.

Using the kickstarter

II CA type
a Turn off the ignition switch.
b Open the throttle fully.
c Crank the engine several times with the
kickstarter.
d Follow the normal starting procedure.
e If the engine starts with unstable idle, open
the throttle slightly.

# If Engine Will Not Start (P.111)

63
 20230106100355_32K2FD100_eng_BOOK Page 67 Friday, January 06 2023 [Link] JST

Riding
Starting the Vehicle
a Push the vehicle forward off the centre
stand.
u Lock the rear brake lock.
Operation Guide

u Keep throttle closed.

u Make sure the side stand and centre
stand are up.
b Get on the vehicle.
u Mount the vehicle from the left side, Rear brake lever
keeping at least one foot on the ground.
c Release the rear brake lock.

64
20230106100355_32K2FD100_eng_BOOK Page 68 Friday, January 06 2023 [Link] JST

d Acceleration and deceleration Braking

To accelerate: Open the throttle slowly. Close the throttle and apply the front and
To decelerate: Close the throttle. rear brake levers together.

Operation Guide
Do not apply the brake lock while riding.
It may cause the wheel to lock, reducing
Close (Decelerate) Open (Accelerate)
control of the vehicle.

Rear brake lever Front brake lever

65
 20230106100355_32K2FD100_eng_BOOK Page 69 Friday, January 06 2023 [Link] JST

Refuelling
Fuel type: Unleaded petrol only
Lower edge of
Fuel octane number: Your vehicle is
Fuel fill cap
filler neck designed to use Research Octane Number
Operation Guide

(RON) 91 or higher.
Tank capacity: 4.2 L (1.11 US gal, 0.92 Imp
gal)
Arrow marks
# Refuelling and Fuel Guidelines (P.12)
Opening the Fuel Fill Cap
a Open the seat. (P.70)
b Turn the fuel fill cap counterclockwise until it
stops and remove the cap.

Do not fill with fuel above the lower edge of

the filler neck.

66
20230106100355_32K2FD100_eng_BOOK Page 70 Friday, January 06 2023 [Link] JST

Closing the Fuel Fill Cap

a Install and tighten the fuel fill cap firmly by
turning it clockwise.
u Make sure that the arrow marks on the

Operation Guide
cap and fuel tank are aligned.
b Close the seat.

3WARNING
Petrol is highly flammable and
explosive. You can be burned or
seriously injured when handling fuel.

• Stop the engine, and keep heat,

sparks, and flames away.
• Only handle fuel outdoors.
• Wipe up spills immediately.

67
 20230106100355_32K2FD100_eng_BOOK Page 71 Friday, January 06 2023 [Link] JST

USB Socket
The USB socket is located in the left inner To connect your USB device
rack. (P.73) a Open the left inner rack. (P.73)
b Open the cover to access the USB socket.
Operation Guide

Use USB devices at your own risk. In no event

shall Honda be liable for any damage to your
USB device when in use. Cover
Only USB devices within the following
specifications can be connected.
Open the cover to access the USB socket. USB socket

Rated capacity is
10.5 W (5 V, 2.1 A)

Do not connect USB devices that exceed the

rated capacity. They may not be charged or
work properly even if connected.
For information on usage or malfunction of c Connect a certified USB cable to the USB
the USB device you connect, refer to its socket.
instruction manual.

68
20230106100355_32K2FD100_eng_BOOK Page 72 Friday, January 06 2023 [Link] JST

u To prevent the battery from becoming weak NOTICE

(or dead), keep the engine running while • Using any heat-generating USB devices or
drawing current from the USB socket. improperly rated USB devices can damage
u To prevent entry of foreign matter into the the USB socket.

Operation Guide
USB socket, be sure to close the cover when • Do not use the USB socket in wet conditions,
the USB socket is not used. when or while washing or any other wet
u Carefully secure all connected devices, as conditions as these will damage the USB
vibration may cause damage to them or socket.
• Do not allow the USB's harness to become
they could shift unexpectedly.
pinched or trapped.

69
 20230106100355_32K2FD100_eng_BOOK Page 73 Friday, January 06 2023 [Link] JST

Storage Equipment
Seat Open
Seat
a Turn the handlebar pointed straight ahead.
b III CA type
Turn the ignition switch to the SEAT
Operation Guide

Seat opener
switch position.
II CA type
Insert the ignition key and turn it to the
III CA type II CA type SEAT position.
Ignition switch SEAT
u To unlock the ignition switch. (P.39)
c Push the SEAT side of the seat opener
switch.
PU
SH
d Open the seat.

SEAT SEAT side Ignition key Seat Close

Seat opener switch SEAT side Close and push down on the rear of the seat
until locks. Make sure that the seat is locked
securely to pull it up lightly.
II CA type
Take care not to lock your keys in the
compartment under the seat.

70
20230106100355_32K2FD100_eng_BOOK Page 74 Friday, January 06 2023 [Link] JST

Helmet Holder
3WARNING
The helmet holders are located under the
Riding with a helmet attached to the
seat.
holder can interfere with your ability to

Operation Guide
u Use the helmet holders only when parked.
safely operate the vehicle and could
lead to a crash in which you can be
Helmet seriously hurt or killed.
holders
Use the helmet holder only while
parked. Do not ride with a helmet
secured by the holder.

Continued 71
 20230106100355_32K2FD100_eng_BOOK Page 75 Friday, January 06 2023 [Link] JST

Storage Equipment (Continued)

Tool
The tools are on the reverse side of the seat.
Document bag
Operation Guide

Document Bag
Document
The document bag is in the document
compartment
compartment on the reverse side of the seat.
Tools
Centre compartment
Never exceed the maximum weight limit.
Maximum Weight: 10 kg (22 lb) Centre compartment
u Do not store any items that are flammable
of susceptible to heat damage.
u Do not store valuables or fragile articles.

72
20230106100355_32K2FD100_eng_BOOK Page 76 Friday, January 06 2023 [Link] JST

A helmet can be stored in the centre Inner Rack

compartment. The inner racks are provided below the
Set in the front of the helmet forward. handlebar.

Operation Guide
u Some helmets may not fit in the
compartment due to their size or design. # Open the left inner rack
Pull the lid knob upwards and open the lid.
Helmet
#Close the left inner rack
Close the lid until it locks.

Lid knob

Lid

# Opening the Seat (P.70) Right inner rack

Left inner rack

Continued 73
 20230106100355_32K2FD100_eng_BOOK Page 77 Friday, January 06 2023 [Link] JST

Storage Equipment (Continued)

Hook
The hook is provided below the handlebar.
u Do not attach large luggage to the hook
Operation Guide

that would hang out from the vehicle and/or

interfere with the movement of your feet.

Hook

The maximum allowable load on the hook

and inner racks shall be no more than 1.5 kg
(3.3 lb).

74
20230106100355_32K2FD100_eng_BOOK Page 78 Friday, January 06 2023 [Link] JST

Maintenance

Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully

before attempting any maintenance. Refer to “Specifications” for service data.

Importance of Maintenance ........................... P. 76 Replacing the Honda SMART Key Battery .. P. 107
Maintenance Schedule..................................... P. 78
Maintenance Fundamentals ........................... P. 81
Tools ..................................................................... P. 91
Removing & Installing Body Components.. P. 92
Battery .................................................................... P. 92
Clip .......................................................................... P. 94
Front Top Cover .................................................. P. 95
Rear Centre Cover............................................... P. 96
Engine Oil ............................................................ P. 97
Brakes................................................................... P. 99
Side Stand ......................................................... P. 105
Throttle .............................................................. P. 106
Other Replacement......................................... P. 107
 20230106100355_32K2FD100_eng_BOOK Page 79 Friday, January 06 2023 [Link] JST

Importance of Maintenance

Importance of Maintenance Maintenance Safety

Keeping your vehicle well-maintained is Always read the maintenance instructions
absolutely essential to your safety and to before you begin each task and make sure that
protect your investment, obtain maximum you have the tools, parts, and skills required.
performance, avoid breakdowns, and reduce air We cannot warn you of every conceivable
Maintenance

pollution. Maintenance is the owner's hazard that can arise in performing

responsibility. Be sure to inspect your vehicle maintenance. Only you can decide whether or
before each ride and perform the periodic not you should perform a given task.
checks specified in the Maintenance Schedule. Follow these guidelines when performing
2 P. 78 maintenance.
II CA type
3WARNING ● Stop the engine and remove the key.
Improperly maintaining your vehicle or III CA type
failing to correct a problem before you ● Stop the engine and turn the ignition switch
ride can cause a crash in which you can to the (Off) position.
be seriously hurt or killed. ● Place your vehicle on a firm, level surface
using the side stand, centre stand or a
maintenance stand to provide support.
Always follow the inspection and
● Allow the engine, muffler, brakes, and other
maintenance recommendations and
high-temperature parts to cool before
schedules in this owner's manual. servicing as you can get burned.

76
20230106100355_32K2FD100_eng_BOOK Page 80 Friday, January 06 2023 [Link] JST

Importance of Maintenance

● Run the engine only when instructed, and

do so in a well-ventilated area.

Maintenance
77
 20230106100355_32K2FD100_eng_BOOK Page 81 Friday, January 06 2023 [Link] JST

Maintenance Schedule
The maintenance schedule specifies the All scheduled maintenance is considered a
maintenance requirements necessary to ensure normal owner operating cost and will be
safe, dependable performance, and proper charged to you by your dealer. Retain all
emission control. receipts. If you sell the vehicle, these receipts
should be transferred with the vehicle to the
Maintenance work should be performed in new owner.
Maintenance

accordance with Honda's standards and

specifications by properly trained and equipped Honda recommends that your dealer should
technicians. Your dealer meets all of these road test your vehicle after each periodic
requirements. Keep an accurate record of maintenance is carried out.
maintenance to help ensure that your vehicle is
properly maintained.
Make sure that whomever performs the
maintenance completes this record.

78
20230106100355_32K2FD100_eng_BOOK Page 82 Friday, January 06 2023 [Link] JST

Maintenance Schedule

Frequency *1
Pre-ride Annual Regular Refer to
Items Check × 1,000 km 1 6 12 18 24 30 36
Check Replace page
2 P. 81
× 1,000 mi 0.6 4 8 12 16 20 24
Fuel Line –
Fuel Level 66
Throttle Operation 106

Maintenance
Air Cleaner *2 -
Crankcase Breather *3 -
Spark Plug -
Valve Clearance –
Engine Oil 97
Engine Oil Strainer Screen -
Engine Idle Speed –
Drive Belt –

Maintenance Level Maintenance Legend

: Intermediate. We recommend service by your : Inspect (clean, adjust, lubricate, or replace, if necessary)
dealer, unless you have the necessary tools and are : Replace
mechanically skilled. : Clean
Procedures are provided in an official Honda Shop
Manual.
: Technical. In the interest of safety, have your vehicle
serviced by your dealer.

Continued 79
 20230106100355_32K2FD100_eng_BOOK Page 83 Friday, January 06 2023 [Link] JST

Maintenance Schedule

Frequency *1
Pre-ride Annual Regular Refer to
Items Check × 1,000 km 1 6 12 18 24 30 36
Check Replace page
2 P. 81
× 1,000 mi 0.6 4 8 12 16 20 24
Final Drive Oil *4 2 Years –
Battery –
Brake Fluid *4 2 Years 99
Maintenance

100,
Brake Shoes/Pads Wear 104
Brake System 99
Brake Lock Operation –
Headlight Aim -
Lights/Horn –
Clutch Shoes Wear –
Side Stand 105
Suspension –
Nuts, Bolts, Fasteners –
Wheels/Tyres 88
Steering Head Bearings –

Notes:
*1: At higher odometer reading, repeat at the frequency interval established here.
*2 : Service more frequently when riding in unusually wet or dusty areas.
*3 : Service more frequently when riding in rain or at full throttle.
*4 : Replacement requires mechanical skill.

80
20230106100355_32K2FD100_eng_BOOK Page 84 Friday, January 06 2023 [Link] JST

Maintenance Fundamentals

Pre-ride Inspection ● Brakes - Check operation;

Front: check brake fluid level and pads wear
To ensure safety, it is your responsibility to
2 P. 99, 2 P. 100
perform a pre-ride inspection and make sure
Rear: check shoes wear and freeplay, adjust
that any problem you find is corrected. A pre-
if necessary 2 P. 104, 2 P. 101
ride inspection is a must, not only for safety, but
● Lights and horn - Check that lights,

Maintenance
because having a breakdown, or even a flat
indicators and horn function properly
tyre, can be a major inconvenience.
● Side stand ignition cut-off system - Check
for proper function 2 P. 105
Check the following items before you get on
● Wheels and tyres - Check condition, air
your vehicle:
pressure and adjust if necessary. 2 P. 88
● Fuel level - Fill fuel tank when necessary
2 P. 66
● Throttle - Check for smooth opening and
full closing in all steering positions 2 P. 106
● Engine oil level - Add engine oil if necessary.
Check for leaks 2 P. 97

81
 20230106100355_32K2FD100_eng_BOOK Page 85 Friday, January 06 2023 [Link] JST

Maintenance Fundamentals

Replacing Parts 3WARNING

Always use Honda Genuine Parts or their Installing non-Honda parts may make
equivalents to ensure reliability and safety. your vehicle unsafe and cause a crash in
which you can be seriously hurt or
killed.
Maintenance

Always use Honda Genuine Parts or

equivalents that have been designed
and approved for your vehicle.

82
20230106100355_32K2FD100_eng_BOOK Page 86 Friday, January 06 2023 [Link] JST

Maintenance Fundamentals

Battery # What to do in an emergency

If any of the following occur, immediately see your
Your vehicle has a maintenance-free type doctor.
battery. You do not have to check the battery ● Electrolyte splashes into your eyes:
electrolyte level or add distilled water. Clean the u Wash your eyes repeatedly with cool water
for at least 15 minutes. Using water under
battery terminals if they become dirty or pressure can damage your eyes.

Maintenance
corroded. ● Electrolyte splashes onto your skin:
Do not remove the battery cap seals. There is u Remove affected clothing and wash your
no need to remove the cap when charging. skin thoroughly using water.
● Electrolyte splashes into your mouth:
NOTICE u Rinse mouth thoroughly with water, and do
Your battery is a maintenance-free type and can not swallow.
be permanently damaged if the cap strip is
removed. 3WARNING
The battery gives off explosive hydrogen
This symbol on the battery means that gas during normal operation.
this product must not be treated as
household waste. A spark or flame can cause the battery to
explode with enough force to kill or
NOTICE
seriously hurt you.
An improperly disposed of battery can be
harmful to the environment and human health.
Wear protective clothing and a face
Always confirm local regulations for proper shield, or have a skilled mechanic do the
battery disposal instruction. battery servicing.

Continued 83
 20230106100355_32K2FD100_eng_BOOK Page 87 Friday, January 06 2023 [Link] JST

Maintenance Fundamentals

# Cleaning the Battery Terminals The battery has a limited life span. Consult your
1. Remove the battery. 2 P. 92 dealer about when you should replace the
2. If the terminals are starting to corrode and battery. Always replace the battery with another
are coated with a white substance, wash maintenance-free battery of the same type.
with warm water and wipe clean. NOTICE
3. If the terminals are heavily corroded, clean
Maintenance

Installing non-Honda electrical accessories can

and polish the terminals with a wire brush or overload the electrical system, discharging the
sandpaper. Wear safety glasses. battery and possibly damaging the system.

4. After cleaning, reinstall the battery.

84
20230106100355_32K2FD100_eng_BOOK Page 88 Friday, January 06 2023 [Link] JST

Maintenance Fundamentals

Fuses If a fuse fails repeatedly, you likely have an

electrical fault. Have your vehicle inspected by
Fuses protect the electrical circuits on your your dealer.
vehicle. If something electrical on your vehicle
stops working, check for and replace any blown
fuses. 2 P. 129 Engine Oil

Maintenance
Engine oil consumption varies and oil quality
# Inspecting and Replacing Fuses deteriorates according to riding conditions and
Turn the ignition switch to the (Off) position
time elapsed.
to remove and inspect fuses. If a fuse is blown,
Check the engine oil level regularly, and add the
replace with a fuse of the same rating. For fuse recommended engine oil if necessary. Dirty oil
ratings, see “Specifications.” 2 P. 147 or old oil should be changed as soon as
possible.
Blown fuse
# Selecting the Engine Oil
For recommended engine oil, see
“Specifications.” 2 P. 147

If you use non-Honda engine oil, check the

NOTICE label to make sure that the oil satisfies all of the
Replacing a fuse with one that has a higher following standards:
rating greatly increases the chance of damage to ● JASO T 903 standard*1: MB
the electrical system. ● SAE standard*2: 10W-30
● API classification*3: SJ or higher

Continued 85
 20230106100355_32K2FD100_eng_BOOK Page 89 Friday, January 06 2023 [Link] JST

Maintenance Fundamentals

*1.
The JASO T 903 standard is an index for engine Brake Fluid
oils for 4-stroke motorcycle engines. There are
two classes: MA and MB. For example, the Do not add or replace brake fluid, except in an
following label shows the MB classification. emergency. Use only fresh brake fluid from a
sealed container. If you do add fluid, have the
Oil code brake system serviced by your dealer as soon as
Maintenance

possible.
MB Oil classification NOTICE
Brake fluid can damage plastic and painted
*2.
The SAE standard grades oils by their viscosity. surfaces.
*3.
The API classification specifies the quality and Wipe up spills immediately and wash
performance rating of engine oils. Use SJ or higher thoroughly.
oils, excluding oils marked as “Energy Conserving”
or “Resource Conserving” on the circular API Recommended brake fluid:
service symbol. Honda DOT 3 or DOT 4 Brake Fluid or
equivalent

Not recommended Recommended

86
20230106100355_32K2FD100_eng_BOOK Page 90 Friday, January 06 2023 [Link] JST

Maintenance Fundamentals

Crankcase Breather
Service more frequently when riding in rain, at
full throttle, or after the vehicle is washed or
overturned. Service if the deposit level can be
seen in the transparent section of the drain

Maintenance
tube.
If the drain tube overflows, the air filter may
become contaminated with engine oil, causing
poor engine performance.

87
 20230106100355_32K2FD100_eng_BOOK Page 91 Friday, January 06 2023 [Link] JST

Maintenance Fundamentals

Tyres (Inspecting/Replacing) # Inspecting for Abnormal Wear

# Checking the Air Pressure Inspect the tyres for
Visually inspect your tyres and use an air signs of abnormal wear
pressure gauge to measure the air pressure at on the contact surface.
least once a month or any time you think the
Maintenance

tyres look low. Always check air pressure when

your tyres are cold.

# Inspecting for Damage

Inspect the tyres for
cuts, slits, or cracks that
expose fabric or cords,
or nails or other
foreign objects
embedded in the side
of the tyre or the tread.
Also inspect for any unusual bumps or bulges in
the side walls of the tyres.

88
20230106100355_32K2FD100_eng_BOOK Page 92 Friday, January 06 2023 [Link] JST

Maintenance Fundamentals

# Inspecting Tread Depth 3WARNING

Inspect the tread wear indicators. If they
become visible, replace the tyres immediately. Riding on tyres that are excessively
worn or improperly inflated can cause a
crash in which you can be seriously hurt
or killed.

Maintenance
or TWI
Follow all instructions in this owner's
manual regarding tyre inflation and
maintenance.
Wear indicator
location mark

Continued 89
 20230106100355_32K2FD100_eng_BOOK Page 93 Friday, January 06 2023 [Link] JST

Maintenance Fundamentals

Have your tyres replaced by your dealer.

For recommended tyres and air pressure, see
3WARNING
“Specifications.” 2 P. 146 Installing improper tyres on your
Follow these guidelines whenever you replace vehicle can adversely affect handling
tyres: and stability, and can cause a crash in
● Use the recommended tyres or their which you can be seriously hurt or
Maintenance

equivalents of the same size, construction, killed.

speed rating, and load range.
● Do not install a tube inside a tubeless tyre Always use the size and type of tyres
on this vehicle. Excessive heat build-up can recommended in this owner's manual.
cause the tube to burst.
● Use only tubeless tyres on this vehicle.
The rims are designed for tubeless tyres,
and during hard acceleration or braking, a
tube-type tyre could slip on the rim and
cause the tyre to rapidly deflate.

90
20230106100355_32K2FD100_eng_BOOK Page 94 Friday, January 06 2023 [Link] JST

Tools
The tools are on reverse side of the seat.
2 P.72

You can perform some roadside repairs, minor

adjustments and parts replacement with the
provided tools.

Maintenance
● Standard/Phillips screwdriver
● Screwdriver handle
● Spark plug wrench

91
 20230106100355_32K2FD100_eng_BOOK Page 95 Friday, January 06 2023 [Link] JST

Removing & Installing Body Components

Battery Negative terminal

Battery
Screws
Maintenance

Battery lid

Screws

Positive terminal

Battery
# Removal
cover Make sure the ignition switch is in the
(Off) position.
1. Remove the battery lid from the step floor
by removing the screws.
2. Remove the battery cover by removing
the screws.

92
20230106100355_32K2FD100_eng_BOOK Page 96 Friday, January 06 2023 [Link] JST

Removing & Installing Body Components u Battery

3. Disconnect the negative - terminal from # Installation

the battery. Install the parts in the reverse order of
4. Disconnect the positive + terminal from removal. Always connect the positive +
the battery. terminal first. Make sure bolts and nuts are
5. Remove the battery, taking care not to tight.

Maintenance
drop the terminal nuts.
Make sure the clock information is correct
after the battery is reconnected. 2 P. 27

The anti-theft alarm system will be

deactivated if the battery is disconnected.
The system will remain off when the battery is
reconnected.
To activate the system, ”Setting the Anti-theft
Alarm System.” 2 P. 45

For proper handling of the battery, see

“Maintenance Fundamentals.” 2 P. 83
“Battery Goes Dead.” 2 P. 126

93
 20230106100355_32K2FD100_eng_BOOK Page 97 Friday, January 06 2023 [Link] JST

Removing & Installing Body Components u Clip

Clip # Installation
1. Push the bottom of the centre pin.
# Removal
1. Press down on the centre pin to release
the lock.
Maintenance

2. Pull the clip out of the hole.

2. Insert the clip into the hole.
Centre pin 3. Press down on the centre pin to lock the
clip.

94
20230106100355_32K2FD100_eng_BOOK Page 98 Friday, January 06 2023 [Link] JST

Removing & Installing Body Components u Front Top Cover

Front Top Cover # Removal

When removing and installing the front top
cover assembly, be careful not to damage
Connector A Connector B
the wire harness.
1. Remove the screws A.

Maintenance
2. Remove the screws B.
3. Remove the clips. 2 P. 94
4. Disconnect the connector A and the
connector B.
Front top cover 5. Remove the front top cover.
u Place the front top cover in a safety
area.
u Be careful not to damage the front top
cover and headlight lens.

# Installation
Install the parts in the reverse order of
Screws B removal.
Clips
Screws A

95
 20230106100355_32K2FD100_eng_BOOK Page 99 Friday, January 06 2023 [Link] JST

Removing & Installing Body Components u Rear Centre Cover

Rear Centre Cover # Removal

1. Open the seat. 2 P. 70
Screws 2. Remove the screws.
Rear centre cover Tabs 3. Remove the rear centre cover by
releasing the tabs.
Maintenance

# Installation
1. Install the parts in the reverse order of
removal.
2. Close the seat.

96
20230106100355_32K2FD100_eng_BOOK Page 100 Friday, January 06 2023 [Link] JST

Engine Oil

Checking the Engine Oil Oil fill cap/dipstick

Check the engine oil with the Idling Stop Upper

switch at (Idling). level

Maintenance
1. If the engine is cold, idle the engine for 3
to 5 minutes.
2. Turn the ignition switch to the (Off)
position and wait for 2 to 3 minutes. Lower level
3. Place your vehicle on its centre stand on a
firm, level surface.
4. Remove the oil fill cap/dipstick and wipe it
clean.
5. Insert the oil fill cap/dipstick until it seats,
but don't screw it in.
6. Check that the oil level is between the
upper level and lower level marks on the
oil fill cap/dipstick.
7. Securely install the oil fill cap/dipstick.

97
 20230106100355_32K2FD100_eng_BOOK Page 101 Friday, January 06 2023 [Link] JST

Engine Oil u Adding Engine Oil

Adding Engine Oil NOTICE

Overfilling with oil or operating with insufficient
If the engine oil is below or near the lower oil can cause damage to your engine. Do not mix
level mark, add the recommended engine oil. different brands and grades of oil.
2 P. 85, 2 P. 147 For the recommended oil and oil selection
Maintenance

1. Remove the oil fill cap/dipstick. Add the guidelines, see “Maintenance Fundamentals.”
recommended oil until it reaches the 2 P. 85
upper level mark.
u Place your vehicle on its centre stand
on a firm, level surface when checking
the oil level.
u Do not overfill above the upper level
mark.
u Make sure no foreign objects enter the
oil filler opening.
u Wipe up any spills immediately.
2. Securely reinstall the oil fill cap/dipstick.

98
20230106100355_32K2FD100_eng_BOOK Page 102 Friday, January 06 2023 [Link] JST

Brakes

Checking the Front Brake Fluid Front brake LWR level mark
fluid reservoir
1. Place your vehicle in an upright position
on a firm, level surface.
2. Check that the brake fluid reservoir is

Maintenance
horizontal and that the fluid level is above
the LWR level mark.
If the brake fluid level in the reservoir is
below the LWR mark or the brake levers
freeplay becomes excessive, inspect the
brake pads for wear.
If the brake pads are not worn, you most
likely have a leak. Have your vehicle
inspected by your dealer.

99
 20230106100355_32K2FD100_eng_BOOK Page 103 Friday, January 06 2023 [Link] JST

Brakes u Inspecting the Front Brake Pads

Inspecting the Front Brake Inspect the brake pads from below the brake
caliper.
Pads If necessary, have the pads replaced by your
dealer.
Check the condition of the brake pad wear
Always replace both left and right brake pads
indicators.
Maintenance

at the same time.

The pads need to be replaced if a brake pad
is worn to the indicator.

Brake pads

Wear
indicators

Disc

100
20230106100355_32K2FD100_eng_BOOK Page 104 Friday, January 06 2023 [Link] JST

Brakes u Inspecting the Rear Brake Lever Freeplay

Inspecting the Rear Brake Lever Check the brake cable for kinks or signs of
wear. If necessary, have it replaced by your
Freeplay dealer.
Lubricate the brake cable with a
1. Place the vehicle on its centre stand.
commercially available cable lubricant to
2. Measure the distance the rear brake lever

Maintenance
prevent premature wear and corrosion.
moves before the brake takes hold.
Make sure the brake arm, spring and fastener
Freeplay at the tip of the brake lever: are in good condition.
10 - 20 mm (0.4 - 0.8 in)

Freeplay

101
 20230106100355_32K2FD100_eng_BOOK Page 105 Friday, January 06 2023 [Link] JST

Brakes u Adjusting the Rear Brake Lever Freeplay

Adjusting the Rear Brake Lever 1. Adjust by turning the rear brake adjusting
nut a half-turn at a time.
Freeplay
Brake arm pin
Adjust the freeplay of the brake lever with the
front wheel pointed straight ahead.
Maintenance

Make sure the cut-out on the adjusting nut is

seated on the brake arm pin when adjusting
the freeplay.

Increase
Adjusting nut freeplay
Brake arm pin
Decrease
freeplay Adjusting nut

2. Apply the brake several times and check

for free wheel rotation after the brake
lever is released.

If proper adjustment cannot be obtained by

this method, see your dealer.
102
20230106100355_32K2FD100_eng_BOOK Page 106 Friday, January 06 2023 [Link] JST

Brakes u Adjusting the Rear Brake Lever Freeplay

3. Push the brake arm to confirm that there

is a gap between the rear brake adjusting
nut and brake arm pin.

Brake arm

Maintenance
Push

Brake arm pin

Gap Adjusting nut

After adjustment, confirm the freeplay of the

brake lever.
Make sure the brake arm, spring and fastener
are in good condition.
NOTICE
Do not turn the adjuster beyond its natural limits.

103
 20230106100355_32K2FD100_eng_BOOK Page 107 Friday, January 06 2023 [Link] JST

Brakes u Inspecting the Rear Brake Shoe Wear

Inspecting the Rear Brake Shoe When the brake is applied, an arrow attached
to the brake arm moves toward a reference
Wear mark on the brake panel. If the arrow aligns
with the reference mark on full application of
The rear brake is equipped with a brake wear
the brake, the brake shoes must be replaced.
indicator.
Maintenance

See your dealer for this service.

Brake panel When brake service is necessary, see your
dealer. Use only Honda Genuine Parts or
their equivalent.
Arrow

Brake arm Reference

mark

104
20230106100355_32K2FD100_eng_BOOK Page 108 Friday, January 06 2023 [Link] JST

Side Stand

Checking the Side Stand 1. Place your vehicle on its centre stand on a
firm, level surface.
2. Check that the side stand operates
Side stand spring
smoothly. If the side stand is stiff or
squeaky, clean the pivot area and

Maintenance
lubricate the pivot bolt with clean grease.
3. Check the spring for damage or loss of
tension.
4. Sit on the vehicle and raise the side stand.
5. Start the engine.
6. Lower the side stand all the way. The
engine should stop as you lower the side
stand. If the engine doesn't stop, have
your vehicle inspected by your dealer.

105
 20230106100355_32K2FD100_eng_BOOK Page 109 Friday, January 06 2023 [Link] JST

Throttle

Checking the Throttle

With the engine off, check that the throttle
rotates smoothly from fully closed to fully
open in all steering positions and throttle
Maintenance

freeplay is correct. If the throttle does not

move smoothly or close automatically, or if
the cable is damaged, have the vehicle
inspected by your dealer.
Freeplay at the throttle grip flange:
2 - 6 mm (0.1 - 0.2 in)

Freeplay

Flange

106
20230106100355_32K2FD100_eng_BOOK Page 110 Friday, January 06 2023 [Link] JST

Other Replacement

Replacing the Honda SMART 1. Remove the upper case by inserting a

coin or a flat head screwdriver covered
Key Battery with a protective cloth into the slit.
III CA type
u Wrap a coin or a screwdriver with a
protective cloth to prevent scratching
If the Honda SMART Key indicator flashes 5

Maintenance
the Honda SMART Key.
times when the ignition switch is turned to
u Do not touch the circuit or terminal.
the (On) position, or the operating range
This may cause problems.
becomes unstable, replace the battery as
u Be careful to avoid scratching the
soon as possible.
waterproof covering or allowing dust
We recommend to see your dealer for this
to enter.
service.
u Do not forcibly dismantle the Honda
Battery type: CR2032 SMART Key body.

Continued 107
 20230106100355_32K2FD100_eng_BOOK Page 111 Friday, January 06 2023 [Link] JST

Other Replacement u Replacing the Honda SMART Key Battery

Upper case 3WARNING

Battery CHEMICAL BURN HAZARD
The battery that powers the Honda
Protective
cloth SMART Key can cause severe internal
burns and can even lead to death if
Maintenance

swallowed.
Keep new and used batteries away from
children.
Slit If you suspect that a child has
Lower case
swallowed the battery, seek medical
2. Replace the old battery with a new attention immediately.
battery with the negative - side facing
up.
3. Snap the two halves of the case back
together.
u Make sure that upper and lower cases
are set in the right position.

108
20230106100355_32K2FD100_eng_BOOK Page 112 Friday, January 06 2023 [Link] JST

Other Replacement u Replacing the Honda SMART Key Battery

CAUTION
• Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type.
• Do not exposed to excessive heat such as

Maintenance
sunshine, fire or the like, that can result in
an explosion or the leakage of flammable
liquid or gas during use, storage or
transportation.
• Do not dispose of a battery into fire or a
hot oven, or give mechanically crushing
or cutting of a battery, that can result in
an explosion.
• Do not subjected to extremely low air
pressure at high altitude that may result in
an explosion or the leakage of flammable
liquid or gas.

109
20230106100355_32K2FD100_eng_BOOK Page 113 Friday, January 06 2023 [Link] JST

Troubleshooting

Engine Will Not Start...................................... P. 111 Engine Does Not Start Even If the Throttle is
Warning Indicators On or Flashing............. P. 112 Opened ............................................................. P. 117
PGM-FI (Programmed Fuel Injection) When the Honda SMART Key System Does Not
Malfunction Indicator Lamp (MIL)............... P. 112 Operate Properly........................................... P. 118
Battery Charging Condition indicator .......... P. 112 Unlock the Seat in an Emergency ............... P. 120
Honda SMART Key Indicator.......................... P. 113 Unlock the Ignition Switch in an
Other Warning Indications ........................... P. 114 Emergency ...................................................... P. 122
Fuel Gauge Failure Indication......................... P. 114 Tyre Puncture ................................................... P. 125
When the Idling Stop System Does Not Electrical Trouble............................................. P. 126
Operate Properly........................................... P. 115 Battery Goes Dead............................................ P. 126
Idling Stop Indicator Does Not Come On .. P. 115 Burned-out Light Bulb ..................................... P. 126
Engine is Not Stopped by the Idling Stop System Blown Fuse.......................................................... P. 129
While the Idling Stop Indicator is On......... P. 116 Unstable Engine Operation Occurs
Intermittently ................................................. P. 130
20230106100355_32K2FD100_eng_BOOK Page 114 Friday, January 06 2023 [Link] JST

Engine Will Not Start

Starter Motor Operates But Starter Motor Does Not

Engine Does Not Start Operate
Check the following items: Check the following items:
● Check the correct engine starting ● Check the correct engine starting
sequence. 2 P. 60 sequence. 2 P. 60

Troubleshooting
● Check that there is petrol in the fuel tank. ● Check for a blown fuse. 2 P. 129
● Check if the PGM-FI malfunction indicator ● Check for a loose battery connection
lamp (MIL) is on. (2 P. 92) or battery terminal corrosion
u If the indicator lamp is on, contact (2 P. 84).
your dealer as soon as possible. ● Check the condition of the battery.
2 P. 126
If the problem continues, have your vehicle
inspected by your dealer.

111
 20230106100355_32K2FD100_eng_BOOK Page 115 Friday, January 06 2023 [Link] JST

Warning Indicators On or Flashing

PGM-FI (Programmed Fuel Battery Charging Condition

Injection) Malfunction indicator
Indicator Lamp (MIL) III CA type

If the indicator comes on while riding, you If the indicator comes on while riding, you
may have a serious problem with the PGM-FI may have a condition of low battery voltage
Troubleshooting

system. Reduce speed and have your vehicle or battery performance degradation.
inspected by your dealer as soon as possible. Have your vehicle inspected by your dealer.
If the battery does not have enough voltage
to drive the indicator system, the indicator
may not come on.

112
20230106100355_32K2FD100_eng_BOOK Page 116 Friday, January 06 2023 [Link] JST

Warning Indicators On or Flashing u Honda SMART Key Indicator

Honda SMART Key Indicator ● You lose the Honda SMART Key while
riding
III CA type However, this does not affect the operation
of your vehicle until the ignition switch is
# When the Honda SMART Key locked.
indicator flashes 5 times If you turn the ignition switch to the SEAT,
Replacing the Honda SMART Key (Off) or (Lock) position while the Honda

Troubleshooting
Battery 2 P. 107 SMART Key indicator is flashing, the buzzer
will ring for about 20 seconds.
# When the Honda SMART Key The Honda SMART Key indicator is
indicator is flashing while the automatically goes off, and then the ignition
ignition switch is in the (On) switch will lock.
position To stop this flashing and ringing, press and
The Honda SMART Key indicator flashes hold the start button for more than 2
when communication between your vehicle seconds. After the flashing and ringing stop,
and Honda SMART Key stops after turning the ignition switch is locked.
the ignition switch to the (On) position.
It is probably caused by the following: If you do not have the Honda SMART Key,
● Strong radio waves or noise are affecting the ignition switch can be unlocked in
the system another way. 2 P. 122

113
 20230106100355_32K2FD100_eng_BOOK Page 117 Friday, January 06 2023 [Link] JST

Other Warning Indications

Fuel Gauge Failure Indication

If the fuel system has an error, the fuel gauge
indicators will be displayed as shown in the
illustration. If this occurs, see your dealer as
soon as possible.
Troubleshooting

114
20230106100355_32K2FD100_eng_BOOK Page 118 Friday, January 06 2023 [Link] JST

When the Idling Stop System Does Not Operate Properly

Idling Stop Indicator Does Not If the engine is cold:

Warm up the engine.
Come On The Idling Stop system does not operate
When the Idling Stop indicator does not when the engine is cold.
come on, perform the followings.
If you did not ride the vehicle after engine
starts:

Troubleshooting
If the Idling Stop switch is at (Idling):
Ride the vehicle at speeds of over
Press the Idling Stop switch to (Idling
10 km/h (6 mph). The Idling Stop system
stop)
does not operate until you ride once.

If you started the engine with the kickstarter:

If PGM-FI malfunction indicator lamp (MIL)
II CA type lights:
If you started the engine with the kickstarter, When the PGM-FI malfunction indicator lamp
the Idling Stop system may not operate. (MIL) lights, the Idling Stop system does not
Restart the engine with the start button, operate for protection of the engine. See
referring to the starting procedure (2 P. 60) your dealer.
for standard engine staring.

Continued 115
 20230106100355_32K2FD100_eng_BOOK Page 119 Friday, January 06 2023 [Link] JST

When the Idling Stop System Does Not Operate Properly u Engine is Not Stopped by the Idling Stop System While the Idling Stop Indicator is On

If the battery voltage is low: Engine is Not Stopped by the

Ride the vehicle awhile, then stop the engine
and then restart the engine with start button Idling Stop System While the
referring to the starting procedure (2 P. 60) Idling Stop Indicator is On
for standard engine starting. The Idling Stop
system may not operate if the battery voltage When the engine is not stopped by the Idling
is low. Stop system while the Idling Stop indicator is
Troubleshooting

If this occurs frequently, contact your dealer. on, perform the followings.

If the vehicle does not stop completely:

Stop the vehicle completely. The Idling Stop
system operates if the speed is only at 0 km/h
(0 mph).

If the throttle is not closed completely:

Close the throttle completely.

116
20230106100355_32K2FD100_eng_BOOK Page 120 Friday, January 06 2023 [Link] JST

When the Idling Stop System Does Not Operate Properly u Engine Does Not Start Even If the Throttle is Opened

Engine Does Not Start Even If If the Idling Stop switch is at (Idling):
While the engine is stopping by the Idling
the Throttle is Opened Stop system, if you press the Idling Stop
switch to (Idling), the Idling Stop system
Engine does not start even if the throttle is
will be cancelled. Restart the engine with start
opened, perform the followings.
button referring to the starting procedure
(2 P. 60) for standard engine starting.

Troubleshooting
If the side stand is down:
While the engine is stopped by the Idling
If the Idling Stop indicator flashes (the Idling
Stop system, if you operate the side stand,
Stop switch is at (Idling stop) position),
the flashing Idling Stop indicator turns off or
but engine does not start even if the throttle
stops flashing and stays on, and the Idling
is opened, perform the followings.
Stop system is cancelled. Restart the engine
with start button referring to the starting
procedure (2 P. 60) for standard engine Low (or dead) battery or battery lead is loose:
starting. Check the battery and battery terminals. If
the battery is weak, contact your dealer.

117
 20230106100355_32K2FD100_eng_BOOK Page 121 Friday, January 06 2023 [Link] JST

When the Honda SMART Key System Does Not Operate Properly
III CA type ● Check that there is no communication
When the Honda SMART Key system does failure in the Honda SMART Key system.
not work properly, perform the following. The Honda SMART Key system uses low-
● Check that the Honda SMART Key system intensity radio waves. The Honda SMART
is activated. Key system may not work properly in the
Lightly push the ON/OFF button on the following conditions:
Honda SMART Key. u When there are facilities nearby that
Troubleshooting

If the Honda SMART Key LED is Red, generate strong radio waves or noise
activate the Honda SMART Key system. such as TV towers, power stations,
2 P. 35 radio stations, or airports.
If the Honda SMART Key LED does not u When you carry the Honda SMART
respond, replace the battery. 2 P. 107 Key with a laptop or wireless
communication device such as a radio
or mobile phone.
u When the Honda SMART Key comes
into contact with or is covered by
metal objects.

118
20230106100355_32K2FD100_eng_BOOK Page 122 Friday, January 06 2023 [Link] JST

When the Honda SMART Key System Does Not Operate Properly

● Check that a registered Honda SMART

Key is used.
Use a registered Honda SMART Key.
The Honda SMART Key system cannot be
activated without a registered Honda
SMART Key.
● Make sure that you do not use a broken

Troubleshooting
Honda SMART Key.
If you use a broken Honda SMART Key,
the Honda SMART Key system cannot be
activated. Bring the emergency key and
ID tag to your dealer.
● Check the battery condition and battery
lead in your vehicle.
Check the battery and battery terminals. If
the battery is weak, contact your dealer.
If the Honda SMART Key system cannot be
activated due to other causes, contact your
dealer.

119
 20230106100355_32K2FD100_eng_BOOK Page 123 Friday, January 06 2023 [Link] JST

Unlock the Seat in an Emergency

III CA type 3. Open the seat and turn the emergency
The seat lock can be unlocked by using the key clockwise.
emergency key.
Emergency
seat opener
# Open
1. Pull out the front lid backward while
pushing the side of front lid.
Troubleshooting

Front lid

Projection
Close

Open
Slot
Emergency key

2. Align the projection of the emergency key

with the slot of the emergency seat
opener, and turn the emergency key
counterclockwise.
120
20230106100355_32K2FD100_eng_BOOK Page 124 Friday, January 06 2023 [Link] JST

Unlock the Seat in an Emergency

# Close
1. Close and push down on the rear of the
seat until it locks. Make sure that the seat
is locked securely by pulling it up lightly. If
the seat is not locked, turn the emergency
key clockwise to lock the seat catch.

Troubleshooting
2. Install the front lid. Make sure that all tabs
are installed securely in position.

Front lid

121
 20230106100355_32K2FD100_eng_BOOK Page 125 Friday, January 06 2023 [Link] JST

Unlock the Ignition Switch in an Emergency

III CA type

# Set up to ID number input mode

1. Check the ID number on the ID tag.
2. Press and hold the ignition switch for
more than 4 seconds.
u The Honda SMART Key indicator starts
Troubleshooting

blinking.
3. Press the ignition switch while the Honda
SMART Key indicator is flashing.
Then the buzzer rings, and the Honda
SMART Key indicator comes on.
u This means that you can input the ID
number. Input the ID number on the
ID tag in order from the left in turn by
pressing the ignition switch.

122
20230106100355_32K2FD100_eng_BOOK Page 126 Friday, January 06 2023 [Link] JST

Unlock the Ignition Switch in an Emergency

# ID number input Example:

● To input “0”, wait for 5 seconds without
You can input your ID number by pressing
pushing the ignition switch when the
the ignition switch when the ignition switch is
Honda SMART Key indicator comes on.
in the (Off), (Lock) or SEAT position.
● To input “1”, push the ignition switch once
The ID number is authenticated according to
within 5 seconds when the Honda SMART
the number of times the ignition switch is
Key indicator comes on.

Troubleshooting
pushed.
To input “0” Ignition switch
Push the ignition switch the desired number
of times within 5 seconds when the Honda
SMART Key indicator comes on. After 5
seconds, the Honda SMART Key indicator
goes off and comes on again. This means
that the inputted number is fixed, and you No push
ID number
can input the next number. To input “1” Ignition switch

ID number Push one time

Continued 123
 20230106100355_32K2FD100_eng_BOOK Page 127 Friday, January 06 2023 [Link] JST

Unlock the Ignition Switch in an Emergency

ID number input success To unlock the ignition switch again, repeat

After the last ID number is inputted, the the procedure for unlocking the ignition
Honda SMART Key indicator will go off and switch.
come on again, and buzzer rings twice.
The ignition switch is then unlocked. Turn the ID number input failure
ignition switch to the (On) position within 6 After the last ID number is input, the Honda
minutes. You can start the engine. SMART Key Indicator will flash every second,
Troubleshooting

To lock the ignition switch, turn the ignition buzzer rings once, and the ignition switch
switch to the SEAT, (Off), or (Lock) cannot be unlocked.
position, and push and hold the ignition Follow the procedure again.
switch for about 2 seconds. Buzzer rings 1
time and all turn signals flash once. The
ID number input cancel
ignition switch also locks automatically when
the ignition switch has been in the SEAT, Push and hold the ignition switch for about 2
(Off), or (Lock) position for about 6 seconds.
minutes after the ID number is successfully Also, if you make a mistake while inputting
inputted. the ID number, re-input the ID number from
When the ignition switch is locked, the the beginning.
Honda SMART Key indicator goes off.

124
20230106100355_32K2FD100_eng_BOOK Page 128 Friday, January 06 2023 [Link] JST

Tyre Puncture
Repairing a puncture or removing a wheel
3WARNING
requires special tools and technical expertise.
Riding your vehicle with a temporary
We recommend you have this type of service
tyre repair can be risky. If the temporary
performed by your dealer.
repair fails, you can crash and be
After an emergency repair, always have the
seriously injured or killed.
tyre inspected/replaced by your dealer.

Troubleshooting
If you must ride with a temporary tyre
Emergency Repair Using a Tyre repair, ride slowly and carefully and do
not exceed 50 km/h (30 mph) until the
Repair Kit tyre is replaced.
If your tyre has a minor puncture, you can
make an emergency repair using a tubeless
tyre repair kit.
Follow the instructions provided with the
emergency tyre repair kit.
Riding your vehicle with a temporary tyre
repair is very risky. Do not exceed 50 km/h
(30 mph). Have the tyre replaced by your
dealer as soon as possible.

125
 20230106100355_32K2FD100_eng_BOOK Page 129 Friday, January 06 2023 [Link] JST

Electrical Trouble

Battery Goes Dead Burned-out Light Bulb

Charge the battery using a motorcycle Follow the procedure below to replace a
battery charger. burned-out light bulb.
Remove the battery from the vehicle before Turn the ignition switch to the (Off) or
charging. (Lock) position.
Do not use an automobile-type battery Allow the bulb to cool before replacing it.
Troubleshooting

charger, as these can overheat a motorcycle Do not use bulbs other than those specified.
battery and cause permanent damage. If the Check the replacement bulb for correct
battery does not recover after recharging, operation before riding.
contact your dealer.
NOTICE The headlight and position light use several LEDs.
Jump starting using an automobile battery can If there is a LED which is not turned on, see
damage your vehicle's electrical system and is
your dealer for servicing.
not recommended.

For the light bulb wattage, see

“Specifications.” 2 P. 147

126
20230106100355_32K2FD100_eng_BOOK Page 130 Friday, January 06 2023 [Link] JST

Electrical Trouble u Burned-out Light Bulb

# Brakelight/Taillight Bulb # Front Turn Signal Light Bulb

Socket " " marks
Socket
Bulb

Troubleshooting
Bulb

1. Open the seat. 2 P. 70 1. Remove the front top cover. 2 P. 95

2. Remove the rear centre cover. 2 P. 96 2. Turn the socket counterclockwise and pull it
3. Turn the socket counterclockwise and pull it out.
out. 3. Pull out the bulb without turning it.
4. Remove the bulb by slightly pressing the 4. Install a new bulb and parts in the reverse
bulb and turn it counterclockwise. order of removal.
5. Install a new bulb and parts in the reverse u Use only the amber bulb.
order of removal. u Make sure that the “ ” marks on the
6. Close the seat. socket and front turn signal housing are
aligned.
Continued 127
 20230106100355_32K2FD100_eng_BOOK Page 131 Friday, January 06 2023 [Link] JST

Electrical Trouble u Burned-out Light Bulb

# Rear Turn Signal Light Bulb # License Plate Light Bulb

Socket License plate light cover

Bulb
Troubleshooting

Screws
Bulb

1. Remove the screws and license plate light

1. Open the seat. 2 P. 70 cover.
2. Remove the rear centre cover. 2 P. 96 2. Pull out the bulb without turning it.
3. Turn the socket counterclockwise and pull 3. Install a new bulb and parts in the reverse
it out. order of removal.
4. Pull out the bulb without turning it.
5. Install a new bulb and parts in the reverse
order of removal.
u Use only the amber bulb.
6. Close the seat.
128
20230106100355_32K2FD100_eng_BOOK Page 132 Friday, January 06 2023 [Link] JST

Electrical Trouble u Blown Fuse

Blown Fuse 1. Remove the battery lid and the battery

cover from the step floor. 2 P. 92
Before handling fuses, see “Inspecting and 2. Pull the main fuse and other fuses out
Replacing Fuses.” 2 P. 85 one by one with the fuse puller to check
for a blown fuse. Always replace a blown
# Fuses fuse with a spare fuse of the same rating.
u Spare fuses are provided on the back

Troubleshooting
Battery
cover Spare side of the fuse box cover.
fuses 3. Install the parts in the reverse order of
removal.
NOTICE
Fuse If a fuse fails repeatedly, you likely have an
puller electrical problem. Have your vehicle inspected
by your dealer.

Main fuse

129
 20230106100355_32K2FD100_eng_BOOK Page 133 Friday, January 06 2023 [Link] JST

Unstable Engine Operation Occurs Intermittently

If the fuel pump filter is clogged, unstable
engine operation will occur intermittently
while riding.
Even if this symptom occurs, you can
continue to ride your vehicle.
If unstable engine operation occurs even if
sufficient fuel is available, have your vehicle
Troubleshooting

inspected by your dealer as soon as possible.

130
20230106100355_32K2FD100_eng_BOOK Page 134 Friday, January 06 2023 [Link] JST

Information

Keys..................................................................... P. 132
Ignition Key......................................................... P. 132
Instruments, Controls, & Other Features... P. 135
Caring for Your Vehicle.................................. P. 136
Storing Your Vehicle....................................... P. 139
Transporting Your Vehicle ............................ P. 140
You & the Environment ................................. P. 141
Serial Numbers ................................................ P. 142
Fuels Containing Alcohol .............................. P. 143
Catalytic Converter ......................................... P. 144
 20230106100355_32K2FD100_eng_BOOK Page 135 Friday, January 06 2023 [Link] JST

Keys

Keys Emergency Key

III CA type
Ignition Key The emergency key is used for an emergency.
II CA type ● To unlock the seat. 2 P. 120
Be sure to record the key number provided with
the original keys and record it in this manual.
Store the spare key in a safe location.
To make a duplicate, take the spare key or the
key number to your dealer.
Information

If you lose all keys and the key number, the

ignition switch assembly will probably have to
be removed by your dealer to determine the Emergency key
key number.

A metal key holder may cause damage to the

area surrounding the ignition switch. Do not store the emergency key in any
compartment.

132
20230106100355_32K2FD100_eng_BOOK Page 136 Friday, January 06 2023 [Link] JST

Keys

Honda SMART Key ● Protect the Honda SMART Key from direct
III CA type
sunlight, high temperature, and high
humidity.
Carrying the Honda SMART Key allows you to
● Do not scratch or puncture.
perform the following operations:
● Do not store near any magnetized products
● Locking or unlocking the ignition switch
such as a magnetized key chain.
● Unlocking the seat lock
● Always keep the Honda SMART Key away
● Locking or unlocking the steering
from electric appliances such as a TV, radio,
The ID number of the Honda SMART Key is on
PC or low-frequency massage device.
the ID tag. You can also unlock the ignition

Information
● Keep the Honda SMART Key away from
switch by inputting the ID number.
liquids. If it gets wet, dry it immediately with
Always carry both the emergency key and ID
a soft cloth.
tag, but separate from the Honda SMART Key,
● Keep the Honda SMART Key away from the
to avoid losing all of them at the same time.
vehicle while washing the vehicle.
Also store a copy of your ID number in a safe
● Do not burn.
place other than your vehicle.
● Do not wash in an ultrasonic cleaner.
The Honda SMART Key contains electronic
● If fuel, wax, or grease adhere to the Honda
circuits. If the circuits are damaged, the Honda
SMART Key, wipe it off immediately to avoid
SMART Key will not allow you to perform any
cracking or warping.
operations.
● Do not drop the Honda SMART Key or set
heavy objects on them.

Continued 133
 20230106100355_32K2FD100_eng_BOOK Page 137 Friday, January 06 2023 [Link] JST

Keys

● Do not disassemble the Honda SMART Key

other than when changing a battery. Only
the cover of the Honda SMART Key can be
disassembled. Do not disassemble other
parts.
● Do not lose your Honda SMART Key. If you
lose it, you will need to register a new
Honda SMART Key. See your dealer with
your emergency key and ID tag for
Information

registration.
The battery in the Honda SMART Key system
Honda SMART Key ID Tag
normally lasts about 2 years.

Do not keep mobile phones or other radio

transmitting devices in any compartment. The
radio frequency from the devices will interrupt
the Honda SMART Key system.

To get an additional Honda SMART Key, take

the Honda SMART Key and the vehicle to your
dealer.

134
20230106100355_32K2FD100_eng_BOOK Page 138 Friday, January 06 2023 [Link] JST

Instruments, Controls, & Other Features

Instruments, Controls, & Document Bag

Other Features The owner’s manual, registration, and insurance
information can be stored in the document
Ignition Switch compartment on the reverse side of the seat.
Leaving the ignition switch in the (On) position
with the engine stopped will drain the battery.

Do not turn the ignition switch while riding.

Information
Odometer
The display remains at 999,999 when the
odometer exceeds 999,999.

Tripmeter
The tripmeter resets to 0.0 when the trip
mileage exceeds 9,999.9.

135
 20230106100355_32K2FD100_eng_BOOK Page 139 Friday, January 06 2023 [Link] JST

Caring for Your Vehicle

Caring for Your Vehicle 3. Thoroughly rinse your vehicle with plenty of
clean water and dry with a soft, clean cloth.
Frequent cleaning and polishing is important to 4. After the vehicle dries, lubricate any moving
ensure the life of your Honda. A clean vehicle parts.
makes it easier to spot potential problems. u Make sure that no lubricant spills onto
In particular, seawater and salts used to prevent the brakes or tyres. Brake discs, pads,
ice on roads promote the formation of drum or shoes contaminated with oil will
corrosion. Always wash your vehicle thoroughly suffer greatly reduced braking
after riding on coastal or treated roads. effectiveness and can lead to a crash.
Information

5. Apply a coat of wax to prevent corrosion.

u Avoid products that contain harsh
Washing detergents or chemical solvents. These
Allow the engine, muffler, brakes, and other can damage the metal, paint, and plastic
high-temperature parts to cool before washing. on your vehicle.
1. Rinse your vehicle thoroughly using a low Keep the wax clear of the tyres and brakes.
pressure garden hose to remove loose dirt. u If your vehicle has any mat painted parts,
2. If necessary, use a sponge or a soft towel do not apply a coat of wax to the mat
with mild cleaner to remove road grime. painted surface.
u Clean the headlight lens, panels, and
other plastic components with extra care
to avoid scratching them.
Avoid directing water into the air cleaner,
muffler, and electrical parts.

136
20230106100355_32K2FD100_eng_BOOK Page 140 Friday, January 06 2023 [Link] JST

Caring for Your Vehicle

# Washing Precautions ● Do not direct water at the air cleaner:

Follow these guidelines when washing: u Water in the air cleaner can prevent the
● Do not use high-pressure washers: engine from starting.
u High-pressure water cleaners can ● Do not direct water near the headlight:
damage moving parts and electrical u The headlight's inside lens may fog
parts, rendering them inoperable. temporarily after washing or while riding
u Water in the air intake can be drawn into in the rain. This does not impact the
the throttle body and/or enter the air headlight function.
cleaner. However, if you see a large amount of

Information
● Do not direct water at the muffler: water or ice accumulated inside the
u Water in the muffler can prevent starting lens(es), have your vehicle inspected by
and causes rust in the muffler. your dealer.
● Dry the brakes: ● Do not use wax or polishing compounds on
u Water adversely affects braking mat painted surface:
effectiveness. After washing, apply the u Use a soft cloth or sponge, plenty of
brakes intermittently at low speed to water, and a mild detergent to clean mat
help dry them. painted surfaces. Dry with a soft clean
● Do not direct water under the seat: cloth.
u Water in the under seat compartment
can damage your documents and other
belongings.

Continued 137
 20230106100355_32K2FD100_eng_BOOK Page 141 Friday, January 06 2023 [Link] JST

Caring for Your Vehicle

Aluminium Components Exhaust Pipe and Muffler

Aluminium will corrode from contact with dirt, If the exhaust pipe and muffler are painted, do
mud, or road salt. Clean aluminium parts not use a commercially available abrasive
regularly and follow these guidelines to avoid kitchen cleaning compound. Use a neutral
scratches: detergent to clean the painted surface on the
● Do not use stiff brushes, steel wool, or exhaust pipe and muffler. If you are not sure if
cleaners containing abrasives. your exhaust pipe and muffler are painted,
● Avoid riding over or scraping against curbs. contact your dealer.
Information

Panels
Follow these guidelines to prevent scratches
and blemishes:
● Wash gently using a soft sponge and plenty
of water.
● To remove stubborn stains, use diluted
detergent and rinse thoroughly with plenty
of water.
● Avoid getting petrol, brake fluid, or
detergents on the instruments, panels, or
headlight.

138
20230106100355_32K2FD100_eng_BOOK Page 142 Friday, January 06 2023 [Link] JST

Storing Your Vehicle

Storing Your Vehicle After removing your vehicle from storage,

inspect all maintenance items required by the
If you store your vehicle outdoors, you should Maintenance Schedule.
consider using a full-body cover.
If you won't be riding for an extended period,
follow these guidelines:
● Wash your vehicle and wax all painted
surfaces (except mat painted surfaces). Coat
chrome pieces with rust-inhibiting oil.

Information
● Place your vehicle on its centre stand and
position a block so that both tyres are off
the ground.
● After rain, remove the body cover and allow
the vehicle to dry.
● Remove the battery (2 P. 92) to prevent
discharge. Fully charge the battery and then
place it in a shaded, well-ventilated area.
u If you leave the battery in place,
disconnect the negative - terminal to
prevent discharge.

139
 20230106100355_32K2FD100_eng_BOOK Page 143 Friday, January 06 2023 [Link] JST

Transporting Your Vehicle

Transporting Your Vehicle

If your vehicle needs to be transported, it
should be carried on a motorcycle trailer or a
flatbed truck or trailer that has a loading ramp
or lifting platform and motorcycle tie-down
straps. Never try to tow your vehicle with a
wheel or wheels on the ground.
NOTICE
Information

Towing your vehicle with a wheel or wheels on

the ground can cause serious damage to the
transmission.

140
20230106100355_32K2FD100_eng_BOOK Page 144 Friday, January 06 2023 [Link] JST

You & the Environment

You & the Environment Recycle Wastes

Put oil and other toxic wastes in approved
Owning and riding a vehicle can be enjoyable,
containers and take them to a recycling centre.
but you must do your part to protect the
Call your local or state office of public works or
environment.
environmental services to find a recycling centre
in your area and to get instructions on how to
Choose Sensible Cleaners dispose of non-recyclable wastes. Do not place
used engine oil in the trash or pour it down a
Use a biodegradable detergent when you wash
drain or on the ground. Used oil, petrol, and

Information
your vehicle. Avoid aerosol spray cleaners that
cleaning solvents contain poisons that can hurt
contain chlorofluorocarbons (CFCs) which
refuse workers and contaminate drinking water,
damage the atmosphere's protective ozone
lakes, rivers, and oceans.
layer.

141
 20230106100355_32K2FD100_eng_BOOK Page 145 Friday, January 06 2023 [Link] JST

Serial Numbers

Serial Numbers Frame number

The frame and engine serial numbers uniquely
identify your vehicle and are required in order
to register your vehicle. They may also be
required when ordering replacement parts.
You should record these numbers and keep
them in a safe place.
Information

Engine number

142
20230106100355_32K2FD100_eng_BOOK Page 146 Friday, January 06 2023 [Link] JST

Fuels Containing Alcohol

Fuels Containing Alcohol The use of petrol containing more than 10%
ethanol may:
Some conventional fuels blended with alcohol ● Damage the painting of the fuel tank.
are available in some locales to help reduce ● Damage the rubber tubes of the fuel line.
emissions to meet clean air standards. If you ● Cause corrosion of the fuel tank.
plan to use blended fuel, check that it is ● Cause poor drivability.
unleaded and meets the minimum octane
NOTICE
rating requirement.
Use of blended fuels containing higher than
approved percentages can damage metal,

Information
The following fuel blends can be used in your rubber, plastic parts of your fuel system.
vehicle:
● Ethanol (ethyl alcohol) up to 10% by volume. If you notice any undesirable operating
u Petrol containing ethanol may be symptoms or performance problems, try a
marketed under the name Gasohol. different brand of petrol.

143
 20230106100355_32K2FD100_eng_BOOK Page 147 Friday, January 06 2023 [Link] JST

Catalytic Converter

Catalytic Converter Follow these guidelines to protect your vehicle's

catalytic converter:
This vehicle is equipped with a three-way ● Always use unleaded petrol. Leaded petrol
catalytic converter. The catalytic converter will damage the catalytic converter.
contains precious metals that serve as catalysts ● Keep the engine in good running condition.
in high temperature chemical reactions that ● Have your vehicle serviced if your engine is
convert hydrocarbons (HC), carbon monoxide misfiring, backfiring, stalling, or otherwise
(CO), and oxides of nitrogen (NOx) in the not running properly, stop riding and turn
exhaust gases into safe compounds. off the engine.
Information

A defective catalytic converter contributes to air

pollution and can impair your engine's
performance. A replacement unit must be an
original Honda part or equivalent.

144
20230106100355_32K2FD100_eng_BOOK Page 148 Friday, January 06 2023 [Link] JST

Specifications
■ Main Components Passenger capacity Rider and 1 passenger
II CA type 1,874 mm (73.8 in) Minimum turning
Overall length 1.80 m (5.9 ft)
III CA type 1,864 mm (73.4 in) radius
II CA type 684 mm (26.9 in) *1 : Including rider, passenger, all luggage, and accessories.
Overall width
III CA type 683 mm (26.9 in) *2 : Maximum luggage weight
II CA type 1,074 mm (42.3 in)
Overall height
III CA type 1,076 mm (42.4 in)
II CA type 1,255 mm (49.4 in)
Wheelbase
III CA type 1,251 mm (49.3 in)
Minimum ground II CA type 145 mm (5.7 in)
clearance III CA type 147 mm (5.8 in)
Caster angle 26º 22´

Specifications
Trail 84 mm (3.3 in)
II CA type 93 kg (205 lb)
Curb weight
III CA type 95 kg (209 lb)
Maximum weight
122 kg (269 lb)
capacity *1
Centre
10 kg (22 lb)
Maximum luggage compartment
weight *2 Hook and Inner
1.5 kg (3.3 lb)
racks

145
 20230106100355_32K2FD100_eng_BOOK Page 149 Friday, January 06 2023 [Link] JST

Specifications

Displacement 109.51 cm3 (6.680 cu-in) ■ Service Data

Bore x stroke 47.000 x 63.121 mm (1.8504 x 2.4851 in) II CA type 80/90-14M/C 40P
Front
Compression ratio 10.0 : 1 III CA type 100/90-12 59J
Tyre size
Fuel Unleaded petrol II CA type 90/90-14M/C 46P
Recommended: 91 RON or higher Rear
III CA type 110/90-12 64J
Fuel containing alcohol ETHANOL up to 10% by volume
Tyre type Bias-ply, tubeless
Tank capacity 4.2 L (1.11 US gal, 0.92 Imp gal)
IRC NF66
FTZ6V or YTZ6V II CA type
Battery Vee Rubber V338F
12 V-5.0 Ah (10 HR) Front
Primary reduction V-Matic (2.52:1 ~ 0.82:1) IRC MB86
III CA type
Recommended DUNLOP D314F
Final reduction 10.625
Tyre IRC NR83
II CA type
Vee Rubber V338R A
Specifications

Rear
IRC MB67
III CA type
DUNLOP D314
Tyre air Front 200 kPa (2.00 kgf/cm2, 29 psi)
pressure
Rear 225 kPa (2.25 kgf/cm2, 33 psi)
(Driver only)
Tyre air Front 200 kPa (2.00 kgf/cm2, 29 psi)
pressure
(Driver and Rear 225 kPa (2.25 kgf/cm2, 33 psi)
passenger)
Spark plug (standard) MR7C-9N (NGK)
Spark plug gap 0.8 - 0.9 mm (0.03 - 0.04 in)
Idle speed 1,700 ± 100 rpm

146
20230106100355_32K2FD100_eng_BOOK Page 150 Friday, January 06 2023 [Link] JST

Specifications

Honda 4-stroke motorcycle oil API Service ■ Bulbs

Classification SJ or higher, excluding oils Headlight LED
Recommended
marked as “Energy Conserving” or “Resource Brakelight/Taillight 12 V-21/5 W
engine oil
Conserving” SAE 10W-30, JASO T 903 standard Front turn signal 12 V-10 W × 2
MB
Rear turn signal 12 V-10 W × 2
After
0.65 L (0.69 US qt, 0.57 Imp qt) License plate light 12 V-5 W
Engine oil draining
Position light LED
capacity After
0.80 L (0.85 US qt, 0.70 Imp qt)
disassembly ■ Fuses
After Main fuse 20 A
0.07 L (0.07 US qt, 0.06 Imp qt)
Transmission draining
Other fuse 10 A, 5 A
oil capacity After
0.09 L (0.10 US qt, 0.08 Imp qt)
disassembly

Specifications
Recommended
Honda DOT 3 or DOT 4 Brake Fluid
brake fluid

147
 OM ADV160

cr@[Link]

f Honda Cambodia – NCX

[Link]

4PK2FD10
00X4P-K2F-D100