 (https://www.electronicshub.

org) 

Home (https://www.electronicshub.org) General (https://www.electronicshub.org/general/)

How to Generate PWM Signal using 555 Timer IC?

April 1, 2024 By Ravi Teja(https://www.electronicshub.org/author/raviteja/)

In this tutorial, I will show you how to generate a PWM Signal using 555 Timer IC. We will learn a little bit about the 555 Timer IC, how
it operates as Astable Multivibrator and how can we use the 555 Timer PWM signal to adjust the brightness of an LED.

(https://www.electronicshub.org/wp-content/uploads/2021/01/PWM-using-555-Image1.jpg)

Outline

What is PWM?
PWM, short for Pulse Width Modulation, is an important concept in modern electronics. It is generally used as a power delivery
mechanism in motor control and lighting control systems.
In the PWM technique, the voltage that must be supplied to a DC Motor or an LED is supplied in the form fast switching pulses rather
than a continuous analog signal. The “Duty Cycle” and the “Frequency” of the PWM Signal determines the output voltage.

Duty Cycle of a PWM Signal describes the amount of time the pulse stays HIGH in one cycle. It is usually represented as percentage.

If THIGH is the duration for which the pulse is HIGH in one cycle and TLOW is the duration for which the pulse is LOW, then period of the
pulse is

T = THIGH + TLOW

Duty Cycle = (THIGH / T) * 100

Frequency of the PWM Signal describes the rate at which the signal completes one cycle.

(https://www.electronicshub.org/wp-content/uploads/2018/01/Arduino-DC-Motor-Control-using-L298N-PWM-Duty-Cycle.jpg)

The above image shows different PWM Signals (https://www.electronicshub.org/arduino-pwm/) and different Duty Cycles along with
the output voltage.

It is vey easy to generate a PWM Signal using 555 Timer IC. But before seeing how 555 Timer PWM signal is generated, you need to
understand the Astable Multivibrator operation of 555 Timer IC.
Once you understand this, then by making small modifications, you can effortlessly produce a PWM signal using 555 Timer.

How 555 Timer Works in Astable Mode?

As the name suggests, an Astable Multivibrator is an oscillating circuit without a stable state i.e., it automatically switches between
the two states. Hence, an Astable Multivibrator is also known as Free Running Multivibrator or Free Running Oscillator.

Using just additional three components, we can make the 555 Timer to work in Astable Mode. They are a couple of resistors and a
capacitor.

555 Timer Astable Mode Circuit Diagram

The following image shows a simplified circuit of 555 Timer (https://www.electronicshub.org/555-timer/) IC in Astable Mode.

(https://www.electronicshub.org/wp-content/uploads/2015/06/Schematic-of-IC-555-as-Astable-Multivibrator.jpg)

Operation
I made a dedicated tutorial on “Astable Multivibrator using 555 Timer (https://www.electronicshub.org/astable-multivibrator-using-
555-timer/)”. For detailed explanation, check it out. To understand the working of the 555 Timer in Astable Mode, take a look at the
internal circuit of 555 Timer.
(https://www.electronicshub.org/wp-content/uploads/2015/06/Internal-Connection-in-Astable-mode.jpg)

Initially, when the 555 Timer IC is reset, its output is LOW. This will turn ON the internal transistor, which will provide a discharge path
for the Capacitor through R2.

As the capacitor voltage drops below 1/3 VCC, the output becomes HIGH and transistor is turned OFF. This will make the capacitor to
charge through R1 and R2. As the capacitor voltage rises above 2/3 VCC, the output becomes LOW and the cycle continues.

The following image shows the relationship between the capacitor voltage and the output voltage.
(https://www.electronicshub.org/wp-content/uploads/2015/06/Waveforms-in-Astable-mode-of-operation.jpg)

Essentially, the values of R1, R2 and C will determine the duration for which the output is HIGH or LOW.

Duty Cycle
I guess you can understand where we are headed with the above explanation. Since the duration of output being HIGH or LOW is
dependent on the charging and discharging times of the capacitor, we can control the duty cycle and the frequency of the output
pulse.

In the “Astable Mode” tutorial, I derived all the timing and frequency related values. I will just write the final values here.

TON = 0.693 * (R1 + R2) * C

TOFF = 0.693 * R2 x C

Period T = TON + TOFF = 0.693 * (R1 +2*R2) * C

Frequency F = 1/T = 1.44 / ( (R1 + 2R2) * C) Hz

The following table shows some of the common values for R1, R2 and C and the corresponding frequency.
(https://www.electronicshub.org/wp-content/uploads/2015/06/Frequency-Range-Values-for-555-Timer-in-Astable-Mode.png)

555 Timer PWM Generation

From the above circuit diagram of 555 Timer in Astable Mode, it is clear that the Capacitor is charging through R1 and R2 while it is
discharging only through R2.

Hence, if we replace R2 with a Potentiometer, we can control the charging and discharging tines of the capacitor and essentially the
duty cycle of the PWM Signal.

I chose R1 as 1 KΩ resistor, R2 as a 10 KΩ Potentiometer and C as 10nF (0.01µF) Capacitor. Additionally, I added two fast switching
diodes, one in the charging path and the other in the discharge path.

Circuit Diagram
The following image shows the circuit diagram of 555 Timer PWM Generation.
 (https://www.electronicshub.org/wp-content/uploads/2021/01/555-Timer-PWM-Generation-Circuit-
Diagram.jpg)
Circuit Diagram for 555 Timer PWM Generation

Components Required
555 Timer IC
1 KΩ Resistor
10 KΩ Potentiometer
10nF (0.01µF) Capacitor x 2
1N4148 Fast Switching Diode x 2
470Ω Resistor
LED
Breadboard
12V Power Supply
Connecting Wires

Working of 555 Timer PWM Generation

NOTE: Instead of 1 KΩ Resistor for R1, I connected two 470Ω Resistors in series. Also, I did not connect the 10nF capacitor between
Pin 5 of 555 IC and GND.
(https://www.electronicshub.org/wp-content/uploads/2021/01/PWM-using-555-Image2.jpg)

Before understanding the working of 555 Timer PWM Generation Circuit, if you want to calculate the Duty Cycle and Frequency of the
4 Responses
PWM Signal based on the chosen components, you can use the aforementioned formulas.

Now proceeding Kaveri wagh says:

with working, the capacitor charges through R1, D2 and right side of R2 and discharges through left side of R2 and
D1. So, as we slideVery
the nicely
potentiometer’s
explained. wiper, we are controlling the charging and discharging times of the capacitor.
Very nicely explained.
Since the chargingThank you
and discharging of capacitor is directly associated with the ON and OFF duration of the output pulse, we can easily
vary the duty cycle of the PWM Signal.
Reply

Bharat. M. Mistry says:

Very nicely illustration

Reply

Ghasem says:
(https://www.electronicshub.org/wp-content/uploads/2021/01/PWM-using-555-Output.gif)

Hi thanks for your really easy to understand.

Conclusion Good job
Wish you luck.
A simple project for generating PWM Signal using 555 Timer IC is demonstrated here. To show the outcome, I used an LED as the
output device. You can easily modify the above circuit to control the speed of a DC Motor.
Reply

Related Posts:
vajira says:

Low Power Audio Amplifier using 555 Timer (https://www.electronicshub.org/low-power-audio-amplifier-using-555-timer/)

PWM LED Dimmer Using NE555 (https://www.electronicshub.org/pwm-led-dimmer-using-ne555/)
 Astable Multivibrator
excellent…using 555 Timer | Circuit,… (https://www.electronicshub.org/astable-multivibrator-using-555-timer/)
How to makeyou
a Simple Servo
teach well. Motor
very Tester
easy to Circuit? (https://www.electronicshub.org/servo-motor-tester-circuit/)
understand.
Thank youUsing 555 Timer (https://www.electronicshub.org/bistable-multivibrator-using-555-timer/)
Bistable Multivibrator
Frequency Counter Circuit (https://www.electronicshub.org/frequency-counter-circuit/)
Reply

Leave a Reply
Your email address will not be published. Required fields are marked *

Comment *

Name *

Email *

Website

Post Comment

Get Our Latest Newletters

Get Great Content That You Love. No Ads Or Spams, We Promise.

(htt (htt
Enter your email
ps:/ ps:/ Sign Up
/ww /ww (htt
w.fa (htt w.y ps:/
ceb p:// out /ww
(https://www.electronicshub.org)

ook. twit ube. w.in

comter. comstag
/ele co /use ram
ctro m/e r/el .co
nics h_o ectr m/e
 nics _ Projects
hub rg) onic h_o
General Projects Tutorials
Tutorials Electrical
.org shu rg/)
Mini projects Capacitors
(https://www.electronicshub.org/tutorials/)
) bor
(https://www.electronicshub.org/electrical-
(https://www.electronicshub.org/electronics-
(https://www.electronicshub.org/tutorials
Symbols projects-ideas/) g)
mini-project-circuits/) Resistors
(https://www.electronicshub.org/symbols/)
Electronics Microcontroller (https://www.electronicshub.org/tutorials
Courses (https://www.electronicshub.org/electronics-
(https://www.electronicshub.org/microcontroller-
Filters
(https://electronicshub.teachable.com/) projects-ideas/) based-mini-projects-ideas/) (https://www.electronicshub.org/tutorials
Calculator Embedded Arduino Diodes
(https://www.electronicshub.org/tools/)(https://www.electronicshub.org/embedded-
(https://www.electronicshub.org/arduino-
(https://www.electronicshub.org/tutorials
Deals (https://electronicshub.bio/) systems-projects-ideas/) project-ideas/) Transistors
Power Solar (https://www.electronicshub.org/tutorials
(https://www.electronicshub.org/top- (https://www.electronicshub.org/solar- Amplifiers
power-electronics-projects-ideas/) energy-projects-ideas/) (https://www.electronicshub.org/tutorials
Robotics Free circuits IO Devices
(https://www.electronicshub.org/robotics-
(https://www.electronicshub.org/free- (https://www.electronicshub.org/tutorials
projects-ideas/) project-circuits/) Thyristors
ARM Home Automation (https://www.electronicshub.org/tutorials
(https://www.electronicshub.org/arm- (https://www.electronicshub.org/home-DC Circuits
based-projects/) automation-projects/) (https://www.electronicshub.org/tutorials
IOT Seminar Topics Number System
(https://www.electronicshub.org/iot- (https://www.electronicshub.org/seminar-
(https://www.electronicshub.org/tutorials
project-ideas/) topics-ece-students/)
Electronics
(https://www.electronicshub.org/basic-
electronics-questions/)
Questions
(https://www.electronicshub.org/basic-
electronics-questions/)

About Advertise with us Contact

(https://www.electronicshub.org/about/) (https://www.electronicshub.org/contact/)

Affiliate Disclosure(https://www.electronicshub.org/affiliate-disclosure/) Disclaimer(https://www.electronicshub.org/disclaimer/)

Terms and Conditions(https://www.electronicshub.org/terms-and-conditions/) Privacy Policy(https://www.electronicshub.org/privacy-policy/)

Copyright © 2024 Electronicshub.org

A RAPTIVE PARTNER SITE