Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
4 views

2gr-Fe Engine Control System - Active Control Engine Mount

The document outlines the removal process for the active control engine mount of the 2GR-FE engine, detailing steps such as disconnecting the battery, removing various engine covers, and securing the automatic transaxle. It also includes inspection instructions for the active control engine mounting, specifying the standard resistance range for proper functionality. If the resistance is outside the specified range, replacement of the active control engine mounting is recommended.

Uploaded by

Mat Freeman
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

2gr-Fe Engine Control System - Active Control Engine Mount

The document outlines the removal process for the active control engine mount of the 2GR-FE engine, detailing steps such as disconnecting the battery, removing various engine covers, and securing the automatic transaxle. It also includes inspection instructions for the active control engine mounting, specifying the standard resistance range for proper functionality. If the resistance is outside the specified range, replacement of the active control engine mounting is recommended.

Uploaded by

Mat Freeman
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

2GR-FE ENGINE CONTROL SYSTEM – ACTIVE CONTROL ENGINE MOUNT ES–529

REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
2. REMOVE ENGINE UNDER COVER LH
3. REMOVE ENGINE UNDER COVER RH
4. REMOVE COOL AIR INTAKE DUCT SEAL (See page
EM-22)
5. REMOVE ENGINE ROOM SIDE COVER LH (See page
EM-22)
6. REMOVE V-BANK COVER SUB-ASSEMBLY (See
page EM-23) ES
7. REMOVE AIR CLEANER INLET ASSEMBLY (See
page EM-23)
8. REMOVE NO. 1 AIR CLEANER INLET (See page EM-
23)
9. REMOVE ENGINE MOUNTING BRACKET FR
HINT:
Securely support the automatic transaxle using a jack.
(a) Disconnect the 2 connectors and clamp.

A128990

(b) Remove the bolt and disconnect the earth cable.

A128988
ES–530 2GR-FE ENGINE CONTROL SYSTEM – ACTIVE CONTROL ENGINE MOUNT

(c) Remove the 4 bolts and engine mounting bracket


FR.

A128989E01

10. REMOVE ACTIVE CONTROL ENGINE MOUNT


(a) Remove the 3 nuts and active control engine mount.
ES

A142722E01

(b) Remove the 2 nuts and acceleration sensor.

A128991E01

ACTIVE CONTROL ENGINE


INSPECTION
MOUNTING: 1. INSPECT ACTIVE CONTROL ENGINE MOUNTING
(a) Using an ohmmeter, measure the resistance
between the terminals.
Standard resistance:
0.55 to 0.95Ω
If the resistance is not as specified, replace the
active control engine mounting.

2 1

A143834E01

You might also like