4 3 2 1
1.0 GENERAL NOTES REVISIONS
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
1.2 FOR PATENT INFO: [Link] REV. DESCRIPTION DATE APPROVED
2.0 DESIGN NOTES RJC
A INITIAL RELEASE 8000042229
2.1 THREADED RODS CAN BE CUT BACK POST INSTALLATION TO PREVENT OBSTRUCTION AS 08/10/20
PER REQUIREMENTS OF TOWER OWNER RRAPEX-0120-00 WAS RRAPEX-0100; RRAPEX-
3.0 MANUFACTURING/SPECIAL REQUIREMENTS RY1002 YW1045
B 0110-00 WAS GUB-4355; QTY OF GWF-04 WAS 16
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL 10MAY24 40195194CMO
EA; ADDED MT-379-8, GWL-04 & GN-04
U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND
D 4.0 TEST
EQUAL FORCE ON EACH LEG OF THE U-BOLT D
5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED
C 15.50 393.7 C
53.18 1350.7
B PACKAGE B
14.18 360.1
COMMSCOPE, INC. OF NORTH CAROLINA
TOLERANCES SAP MATERIAL MASTER
0.25[6.4] 0.060[1.5]
1 PLACE .X[.X] ±
2 PLACE .XX[.X] ± 0.12[3.0]
3 PLACE .XXX[.X] ±
ANGLES ± 2°
RR-APEX4
FINISH MATERIAL
FITS 2-3/8" OD ~ 4-1/2" OD PIPES
NAME DATE TITLE
INTERPRET PER ANSI Y 14.5M-1994
UNLESS OTHERWISE SPECIFIED
A DIMENSIONS ARE IN INCHES
CE RJC
RW RY1002
08/10/20
05/16/2024
APEX 4 RRU MOUNTING A
DENSITY lbs/in³
MASS 93.00 lbs
AD YW1045 05/16/2024
VOLUME 328.92 in³ SCALE DOCUMENT NO.
RE YMENG 05/26/2024
SURFACE AREA 3135.10 in² ECN 40195194CMO 1:6 RR-APEX4
HEIGHT 15.5'' SIZE Auth Group INSL MODEL DRAWING
SHEET
C
LENGTH 53.2'' VERSION STATUS REVISION VERSION STATUS REVISION
C 2024 CommScope, Inc. Confidential WIDTH 14.2'' 02 RE C 01 RE B 1 OF 4
4 3 2 1
4 3 2 1
3 5 6 7 8
D D
2 11 9
9 11
1 B
C 2 11 9
C
9 11 2
1 3 6 5 7 8
B 4
2.1
B B
13 12 11 10
B
2 11 9
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM PART NO. DESCRIPTION QTY. WEIGHT NOTE NO.
1 RRAPEX-0120-00 WELDMENT, RRAPEX BRACKET 2 18.73 LBS B
2 MTC378909 RRU HANGER 8 3.97 LBS
3 RRFA-0001-00 BRACKET, RRU MOUNT SMALL STABILIZER 4 1.46 LBS
4 RRAPEX-0110-00 CLAMP HALF: 1/2",9/16" HOLE,4-1/2 OD 4 1.97 LBS B
COMMSCOPE, INC. OF NORTH CAROLINA
5 MTC8196 3/8 X 1-1/4" CARRIAGE BOLT 16 0.05 LBS TITLE
6 GWF-03 3/8" GALV FLAT WASHER 16 0.01 LBS
A APEX 4 RRU MOUNTING A
7 GWL-03 3/8" GALV LOCK WASHER 16 0.01 LBS
8 GN-03 3/8" GALV HEX NUT 16 0.02 LBS
9 GB-04145 1/2" X 1-1/2" GALV BOLT KIT 16 0.13 LBS SIZE SCALE DOCUMENT NO.
10 MT-379-8 1/2" X 8" GALV THREADED ROD 8 0.44 LBS C 1:4 RR-APEX4
11 GWF-04 1/2" GALV FLAT WASHER 32 0.04 LBS DRAWING
B SHEET
12 GWL-04 1/2" GALV LOCK WASHER 16 0.01 LBS VERSION STATUS REVISION
13 GN-04 1/2" GALV HEX NUT 16 0.04 LBS C 2024 CommScope, Inc. Confidential 01 RE B 2 OF 4
4 3 2 1
4 3 2 1
INSTALLATION NOTES
1. PREASSEMBLE HANGER AND RRU'S.
2. WITH TOP SETS OF ITEMS 9 AND 11 LOOSE, SLIDE HANGER INTO
POSITION THEN TIGHTEN BOLTS FOR INSTALLATION.
3. PUT THE BOTTOM SETS OF ITEMS 9 AND 11 IN AFTER THE HANGER
AND RRU'S ARE INSTALLED.
4. TORQUE ITEMS 9 TO 60FT LBS AFTER INSTALLATION.
D D
RRU SOLD SEPARATELY
17.7 449.71
3 3.0 76.20
C C
11 9 SEE NOTES 2 & 4
B B
21.7 550.80
15.5 393.70
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
A APEX 4 RRU MOUNTING A
SIZE SCALE DOCUMENT NO.
C 1:4 RR-APEX4
11 9 SEE NOTES 3 & 4 DRAWING
SHEET
VERSION STATUS REVISION
C 2024 CommScope, Inc. Confidential 01 RE B 3 OF 4
4 3 2 1
4 3 2 1
NOTES:
LARGE STABILIZER KIT (RRFAK-001L)
D SOLD SEPARATELY D
23.7 602.60
8.6 218.44
1.8 45.08
C C
A2 ORDERED SEPARATELY
RRU ORDERED SEPARATELY
B B
20.4 518.00
15.50 393.70
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
A APEX 4 RRU MOUNTING A
SIZE SCALE DOCUMENT NO.
C 1:4 RR-APEX4
DRAWING
SHEET
VERSION STATUS REVISION
C 2024 CommScope, Inc. Confidential 01 RE B 4 OF 4
4 3 2 1
