Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
60 views

Assignment_3 Engineering Graphics

The document outlines a series of assignments related to the projection of various solids, including pyramids, cylinders, cones, and prisms, with specific dimensions and orientations. Each assignment requires drawing projections based on given conditions, such as resting positions and angles relative to horizontal and vertical planes. The submission deadline for the assignments is April 15, 2025.

Uploaded by

Pradeep T
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views

Assignment_3 Engineering Graphics

The document outlines a series of assignments related to the projection of various solids, including pyramids, cylinders, cones, and prisms, with specific dimensions and orientations. Each assignment requires drawing projections based on given conditions, such as resting positions and angles relative to horizontal and vertical planes. The submission deadline for the assignments is April 15, 2025.

Uploaded by

Pradeep T
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Assignment-3

Projection of solids
1. A right pentagonal pyramid side of base 30mm and height 60mm
rests on one of its base on HP, the base being lifted up until highest
corner in it is 40mm above the HP. Draw the projection when the edge
on which it rests made perpendicular to VP.

2. A cylinder of base diameter 60mm and height 80mm is resting on


HP in one of its generators with its axis inclined at 50 0 to VP. Draw the
projections.
3. A cone of 30mm diameter and 70mm height rests on the ground on
one of its base circle point such that the apex is 20mm and the nearest
base circle point is 50mm in front of VP and the base is perpendicular
to HP. Draw the projections.

4. Draw the projections of a square prism of size 30mm 60mm with a solid
diagonal vertical.

5. A hexagonal pyramid of base side 30mm and axis length 60mm is


resting on HP one of its base corners with the base sides containing the
corner equally inclined to HP and its axis is parallel to both HP and VP.
Draw its projections.

6. A right pentagonal pyramid of base side 20mm and altitude 60mm


rests on one of its edges of the base in HP, the base being tilted up until
the highest corner in it is 30mm above HP. Draw the elevation of the
pyramid when the edge on which it rests is made perpendicular to VP.

7. A cylinder of 40mm, height 60mm is resting on the ground on its


base. It is then tilted such that a solid diagonal is vertical. Draw the
projection.

8. Draw the projection of a hexagonal prism whose one rectangular


face size is 25mm 65mm resting on HP on one of its base corners such
that the other extreme corner is 30mm above HP with the axis parallel
to VP.

9. A hexagonal pyramid of base 25mm and axis 60mm long is freely


suspended from corner of the base. Draw the projections.

10. Draw the projection of a cone of diameter 35mm and height 75mm
lying on the ground on one of its base points with a generator
perpendicular to HP.

11. A hexagonal prism of side of base 25mm and axis 60mm long,
freely suspended from a corner of the base. Draw the projections

12. A cylinder, diameter of base 60mm and height 70mm, having a


point of its periphery of base on HP with axis of the cylinder inclined
to HP at 45 o and parallel to VP. Draw the projections of the cylinder.

13. Draw the projections of a pentagonal prism of 30mm base edges


and axis 60mm long when the axis is inclined at 75 0 to the HP and
parallel to the VP with an edge of the base on the HP.

14. A hexagonal prism side of base 25mm and axis 60mm long, lies
with one of its rectangular faces on the HP, such that the axis is inclined
at 45 0 to the VP. Draw its projections.

15. A pentagonal prism, side of base 25mm and axis 50mm long, rests
with one of its shorter edges on HP such that the base containing the
edge makes an angle of 30 0 to HP and its axis parallel to VP. Draw its
projections.

16. A square pyramid of base side 30mm and height 50mm rests on the
ground on one of its base edges such that its axis is inclined at 45 0 to
the ground and parallel to VP. Draw its projections.

17. A pentagonal pyramid of base side 25mm and axis 55mm long
lies with one of its slant edges on HP such that its axis is parallel to
VP. Draw its projections.

Last Date to submission: 15-04-25

You might also like