DAS
HME
Session
SH 2024-25
PHYSICS
An Investigatory Project on
<Topic name>
Name - Abc Xyz
Class - 12th (Stream)
Subject - Physics Investigatory
Project
Roll no -
SUBMITTED TO: SUBMITTED BY:
Mr. Jainendra Shrivastava Abc Xyz
TABLE OF CONTENTS
S. No. Topic Pg. No.
ACKNOWLEDGEMENT
I extend my heartfelt gratitude to Mr. Jainendra Shrivastava, our
esteemed Physics teacher, whose guidance and support have been
instrumental in the completion of this Class 12 th investigatory project. His
expertise and encouragement have enriched our understanding of physics
concepts and fostered our scientific inquiry.
I would also like to express my sincere appreciation to Mrs. Mamta
Vishwakarma, the Principal of our institute, for her constant
encouragement and support throughout this endeavor. Her unwavering
commitment to academic excellence has inspired us to strive for the
highest standards in our work.
Finally, I would like to thank all those who have directly or indirectly
contributed to the successful completion of this project, including our
classmates, friends, and family members.
[Your Name].
[Class] [Section]
.
DECLARATION
“I, [Your Name], hereby declare that the investigatory project titled “[Project
Title]” reflects my genuine effort and understanding of the topic explored.
While conducting this project, I have endeavored to apply the concepts learned
in class and have supplemented my understanding with additional research
where necessary. I have diligently studied the relevant concepts and
methodologies outlined in the prescribed syllabus. I confirm that any external
sources consulted have been appropriately acknowledged, and no part of this
project has been copied without citation. I further declare that this work has not
been previously submitted for any academic purpose. I acknowledge the
importance of academic integrity and pledge to uphold the principles of honesty
and originality to the best of my ability in this project.”
This declaration acknowledges that the project is based on study and
experimentation rather than original research, while still emphasizing academic
integrity and honesty.
[Your Name].
[Class] [Section]
CERTIFICATE
This is to certify that the investigatory project titled “[Title of the Project]” has
been completed by [Your Name] of Class XII [Your Class and Section],
under the guidance of Mr. Jainendra Shrivastava, Physics Department,
Dashmesh Public Hr. Sec. School, Ambikapur, during the academic year 2024-
25.
The project work has been carried out satisfactorily and meets the requirements
of the Physics curriculum prescribed by the Central Board of Secondary
Education (CBSE), New Delhi.
Sign of. Sign of Sign of
Internal Examiner. Principal External
Examiner
From here onwards
Every content should be
handwritten. Also the
diagrams must be hand
drawn and coloured.
The words highlighted in red are to be edited and filed by the students.
Choose any topic from the Physics Class 12th Textbook OR from the
prescribed topics from CBSE given below:
(Suggested Investigatory Projects):
1. To study various factors on which the internal resistance/EMF of a cell
depends. (ROLL NO. 1 to 5)
2. To study the variations in current flowing in a circuit containing an LDR
because of a variation in
(a) The power of the incandescent lamp, used to ‘illuminate’ the LDR
(keeping all the lamps at a fixed distance).
(b)The distance of a incandescent lamp (of fixed power) used to
'illuminate' the LDR.(ROLL NO. 6 to 10)
3. To find the refractive indices of (a) water (b) oil (transparent) using a
plane mirror, an equiconvex lens (made from a glass of known refractive
index) and an adjustable object needle. (ROLL NO. 11 to 15)
4. To investigate the relation between the ratio of (i) output and input
voltage and (ii) number of turns in the secondary coil and primary coil of
a self-designed transformer. (ROLL NO. 16 to 20)
5. To investigate the dependence of the angle of deviation on the angle of
incidence using a hollow prism filled one by one, with different
transparent fluids. / To study the different phenomenon related with
electromagnetism and draw conclusions from it. (ROLL NO. 21 to 25)
6. To estimate the charge induced on each one of the two identical
Styrofoam (or pith) balls suspended in a vertical plane by making use of
Coulomb's law. (ROLL NO. 26 to 30)
7. To study the factor on which the self-inductance of a coil depends by
observing the effect of this coil, when put in series with a resistor/(bulb)
in a circuit fed up by an A.C. source of adjustable frequency. (ROLL
NO. 31 to 35)
8. To study the earth's magnetic field using a compass needle -bar magnet
by plotting magnetic field lines and tangent galvanometer. (ROLL NO.
36 to 40).
9. To study the I-V characteristics curve of a p-n junction diode in forward
and reverse bias. And design a full wave rectifier using it. (ROLL NO.
41 to 47)
NOTE: All the students have to make separate Investigatory project file
(Spiral binding) individually.
Simply copying from any source (except a few facts) is not allowed.
Date of Submission: On or before 5th November, 2024.
REFERENCES
Ncert Physics Class 12th Textbook
…..
….
….z
