Caprari TechSpec8

TED I NGINE MOUN AR & E PR RIVEN MPS CA TOR D PU RAC GAL T IFU TR 50 EN C
S I N C E
Y E A R S
1 9 5 2
E X C E L L E N C E
Cadman
POWER EQUIPMENT
THE CADMAN-CAPRARI PUMP DIFFERENCE strength simplicity dependability
SINGLE STAGE TRACTOR DRIVEN PUMPS

MEC D2/40
NPSH
A 40
30 20 10
45
50
% 55 58
ft.
340
HEAD FEET
300 280 260 240 220
4000 RPM IMPELLER GEAR BOX 1: 7.43 = 540 RPM

A 25
D3/50
H.P.
20
Caprari pumps are known world-wide for their quality construction, reliability, and high efficiency. For these reasons Cadman has teamed up with Caprari to provide you with these high quality products. Cadman has seven different single stage models to offer, from 50 GPM to 1300 GPM. These pumps are available in bare and fitted forms. Bare pumps are supplied with counterflanges, gaskets and bolts. Fitted pumps come complete with a heavy duty two wheel cart, PTO shaft, liquid pressure gauge, priming check valve, hand primer and NPT thread for the suction port.
MEC D3/50
NPSH
A 40 50 % 55 57
30 20 10 ft. 0
15
10
U.S. G.P.M.
50
100
150
200
All pumps come with the discharge port facing horizontal left (when standing behind suction side). Upon request, they can be rotated to vertical or horizontal right.
MEC D3/65
NPSH
400 B 50 55 60 65 68 70% 71 72
30 20 10 ft. 0
380
360 340 320
HEAD FEET
350
HEAD
300
57 300
280 260
FEET

250 50 A 40

B 240
50
40
H.P.
30
H.P.
30
20 20 10 10
U.S. G.P.M.
100
200
300
U.S. G.P.M.
100
150
200
250
300
350
400
450
500
550
SINGLE STAGE TRACTOR DRIVEN PUMPS

MEC D04/80
30
NPSH
50 C E 60 65 67 69% 69
20 10 ft. 0
HEAD FEET
400 350 300 250
2800 RPM IMPELLER GEAR BOX 1: 3.45 = 812 RPM 1: 5.21 = 537 RPM H.P.
100 C 90 80 E 70 60 50 40 30 20 10 3200 60 65 70
D3/101 A
MEC D3/101
NPSH
72
HEAD FEET
360 74 76 77 78% 320 78 300 280 260 240 220 130 120 110 100 90 80 70 60 340
U.S. G.P.M.
200
300
400
500
600
700
800
3100 3000 2900
IMPELLER SPEED GEAR BOX 1: 3.35 1: 3.83
2900 3000 3100 3200 865 757 895 783 925 809 955 835
3200 3100 3000 2900
H.P.
D04/80
U.S. G.P.M.
500 600 700 800 900 1000 1100 1200 1300
50 40
Single and two-stage pumps are constructed from close grained cast iron. The balanced impellers have two replaceable wear rings for each impeller. A heavy duty step-up gear box has hardened helical spur gears running in oil. Unlike other pump companies that use chromed steel for their pump shafts, Caprari only uses high grade stainless steel. The two shafts are supported by high quality bearings. A simple stuffing box seal is incorporated with a replaceable chromed steel shaft bushing.
MULTIPLE STAGE TRACTOR DRIVEN PUMPS
DMR80 3/2 C
DMR83 3/2 A
For overall efficiency, nothing compares to Capraris line of multiple-stage PTO pumps. With five different models to choose from Cadman can fine tune the perfect pump for you. Multiple gear box ratios and the ability to trim impellers makes this possible. For those rough, hot summer days, Caprari has incorporated a cooling coil constructed from stainless steel.
As an option, all Caprari pumps can have a 12 volt power primer installed. (Also available as a portable unit).
Power Primer
MEC DMR80 3/2

30
MEC DMR83 3/2 A

20 10
NPSH
C 50 E 60 65 70 73 75 77 78%
HEAD FEET
200 185 170
HEAD FEET
3100 3000 2900 2800 62 67 72 76 78 80% 80 78 450 400 350 300 550 500 600
ft.
77 75
158 73 70 142 129 114
2900 RPM IMPELLER GEAR BOX 1: 5.69 = 510 RPM 1: 3.45 = 841 RPM 1: 3.05 = 951 RPM 1: 3.83 = 757 RPM
C
IMPELLER SPEED GEAR BOX 1: 3.35 1: 3.83

H.P.
100 90 80 70 60 50 40 30
2800 2900 3000 3100 836 731 865 757 895 785 925 810
76
H.P.
140 3100 3000 2900 2800 120 100 80 60 40 20
U.S. G.P.M.
100
300
500
700
900
U.S. G.P.M.
100
200
300
400
500
600
700
800
900
MULTIPLE STAGE ENGINE MOUNTED PUMPS
The two and three-stage horizontal shaft centrifugal pumps are equipped with oversized supports and bearings to provide superior coupling dependability for connection to a gasoline or diesel engine. All pumps are flanged for SAE 3 engines, however, adapter rings are available for SAE 1, 2 and 4 engines. Pumps are composed of a suction cover, flow directing bladed diffusers, volute shaped casing, bearing housing, grey cast iron impellers, stainless steel shaft and external carbon steel tie bolts to securely fasten the pump assembly.
MEC MG80/2
30
MEC MG80 4/3 A

30 20 10 ft. 0
NPSH
NPSH
20 10 ft. 0
600
A C
60
65
68
70
450 71 72 73% 72 71 70 68 65 300 250 200
n = 2000 n = 1900
65
HEAD
400
70
72
73
74
HEAD FEET
74.5 74.5 74
500
73 72 70
FEET
350
n = 1750
400
65 1 2
n = 1600
n = 1450 3 4 5
300
200 100
1
2200 RPM IMPELLER
100 A 90 C 80 70 60 50 40 30
H.P.
H.P.
90 80 70
60 50 40 30
n = 2000 n = 1900 n = 1750 n = 1500 n = 1450 5
U.S. G.P.M.
400
500
600
700
800
200 U.S. G.P.M.
300
400
500
600
700
800
MULTIPLE STAGE ENGINE MOUNTED PUMPS

MEC MG100/2
30
MEC MG100 2/2

NPSH
20 10 ft. 0
NPSH
30 20 10
ft.
C
500 450
50 55
60
65
67
69 70 71
63
72
65 68 68 65
7% 72
ft.
500
HEAD
400
71
450 70 69
HEAD FEET
400
FEET
350
350
300 70 73 70 63 250 60 200 200 A 140 130 120 110 100 90 80 70 60
300
H.P.
2000 RPM IMPELLER
1750 RPM IMPELLER
180 160 140 120 100 80 60 40
H.P.
U.S. G.P.M.
500
600
700
800
900
1000
1100
U.S. G.P.M.
400
600
800
1000
1200
Two replaceable wear rings are provided for each impeller. The shaft is supported by two oil lubricated roller bearings. Three-stage pumps incorporate an additional support for the shaft in the form of a bronze journal bearing located in the suction cover, equipped with a mounting bracket. The pump shaft is protected by a replaceable, chromed steel sleeve which is situated in the packing gland area. See your irrigation representative about Cadmans complete line of irrigation products.
Cadman Travellers
Power Units
Manure Pumps
Aluminum Pipe and Fittings
PVC Pipe and Fittings
Cadman Power Equipment Limited, whose policy is one of continuous improvement,reserves the right to change specifications, design or prices without incurring obligation.
Cadman
POWER EQUIPMENT
AGRICULTURAL MACHINERY AND IRRIGATION EQUIPMENT Box 100, Courtland, Ontario, Canada N0J 1E0 Phone (519) 688-2222 Fax (519) 688-2100 E-mail: inquiries@cadmanpower.com www.cadmanpower.com
7.5M/03/00 PRINTED IN CANADA

Caprari TechSpec8

Uploaded by

Copyright:

Available Formats

Caprari TechSpec8

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Caprari TechSpec8

Uploaded by

Copyright:

Available Formats

TED I NGINE MOUN AR & E PR RIVEN MPS CA TOR D PU RAC GAL T IFU TR 50 EN C

THE CADMAN-CAPRARI PUMP DIFFERENCE strength simplicity dependability

SINGLE STAGE TRACTOR DRIVEN PUMPS

4000 RPM IMPELLER GEAR BOX 1: 7.43 = 540 RPM

360 340 320

3400 RPM IMPELLER GEAR BOX 1: 6.28 = 540 RPM

3400 RPM IMPELLER GEAR BOX 1: 6.23 = 540 RPM

SINGLE STAGE TRACTOR DRIVEN PUMPS

3100 3000 2900

IMPELLER SPEED GEAR BOX 1: 3.35 1: 3.83

MULTIPLE STAGE TRACTOR DRIVEN PUMPS

MEC DMR80 3/2

MEC DMR83 3/2 A

158 73 70 142 129 114

IMPELLER SPEED GEAR BOX 1: 3.35 1: 3.83

MULTIPLE STAGE ENGINE MOUNTED PUMPS

MEC MG80 4/3 A

450 71 72 73% 72 71 70 68 65 300 250 200

2200 RPM IMPELLER

n = 2000 n = 1900 n = 1750 n = 1500 n = 1450 5

200 U.S. G.P.M.

MULTIPLE STAGE ENGINE MOUNTED PUMPS

MEC MG100 2/2

1750 RPM IMPELLER

180 160 140 120 100 80 60 40

Aluminum Pipe and Fittings

PVC Pipe and Fittings

You might also like