Conversor24 12

INTERFACE Power Supply
QUINT and MINI POWER DC-DC converters Primary switched-mode power supply units DC-DC converter If no regulated and stable 24 V direct voltage is available for supplying a load, the DC-DC converter ensures adaptation of the 24 V load to an unregulated direct voltage or direct voltage of another voltage level. Due to electrical isolation, the DC voltage circuits are electrically isolated from each other in a safe way.
QUINT 24 V DC/24 V DC/10 A

DC-DC converter
Width 80 mm
UuFol Ex: U
DC OK 13 14
Connection data Input Output Signal
stranded AWG [mm2] 0.2-2.5 0.2-2.5 24-12 0.2-2.5 0.2-2.5 24-12 0.2-2.5 0.2-2.5 24-12
solid
M3 M3 M3 Pcs. / Pkt.
Description DC-DC converter, primary switched mode
Type
Order No.
QUINT-PS- 24DC/24DC/10 Technical data Input data Input nominal voltage range Input voltage range AC/DC Current consumption (nominal load) Inrush current limitation at 25C (typ.) / I2t Input fuse Output data Nominal output voltage Setting range of the output voltage Output current Can be connected in parallel / series Max. power dissipation (idling/nominal load) Efficiency (typ.) Residual ripple Signaling Signaling DC OK General data Weight / Dimensions W x H x D Installation position Distance during assembly Type of connection Degree of protection / Class of protection MTBF (at nominal load, 40C) Ambient temperature (operation) Ambient temperature (storage/transport) Max. permissible relative humidity (operation) Standards/regulations Insulation voltage input/output Electromagnetic compatibility Electrical safety, safety transformer Electronic equipm. for electrical power installations Safe isolation UL approvals
2866378
24 V DC - / 18 V DC ... 32 V DC Approx. 11.4 A (24 V) / < 20 A / 0.3 A2s 25 A (slow-blow, internal) 24 V DC 1% 22.5 V DC ... 28.5 V DC (> 24 V constant capacity) 10 A Yes / Yes 2 W / 28 W > 88% (at 24 V DC and nominal values) < 30 mVPP LED, active switching output, relay contact 0.95 kg / 80 x 130 x 125 mm Horizontal DIN rail NS 35, EN 60715 Can be aligned: Horizontal 0 cm, vertical 5 cm Pluggable screw connection IP20 / III > 500 000 h in acc. with IEC 61709 (SN 29500) -25C ... 70C (> 60C derating) -40C ... 85C 95% (at 25C, no condensation) 1.5 kV (type test) / 1 kV (routine test) Conformance with EMC directive 89/336/EEC EN 60950/VDE 0805 (SELV), EN 61558-2-17 EN 50178/VDE 0160 (PELV) DIN VDE 0100-410, DIN VDE 0106-1010 UL/C-UL listed UL 508, UL/C-UL Recognized UL 60950, UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D
598
PHOENIX CONTACT
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370 Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
INTERFACE Power Supply

QUINT and MINI POWER DC-DC converters
MINI 12-24 V DC/24 V DC/1 A

DC-DC converter
MINI 48-60 V DC/24 V DC/1 A

DC-DC converter
Width 22.5 mm
UuF Ex: U
Width 22.5 mm
Uu Ex: U
NC NC DC OK
NC NC DC OK
Connection data Input Output Signal
stranded AWG [mm2] 0.2-2.5 0.2-2.5 24-12 0.2-2.5 0.2-2.5 24-12 0.2-2.5 0.2-2.5 24-12
solid
Connection data M3 M3 M3 Pcs. / Pkt. Input Output Signal
stranded [mm2] AWG 0.2-2.5 0.2-2.5 24-12 0.2-2.5 0.2-2.5 24-12 0.2-2.5 0.2-2.5 24-12
solid
M3 M3 M3 Pcs. / Pkt.
Type
Order No.
Type
Order No.
MINI-PS- 12- 24DC/24DC/1
2866284
MINI-PS- 48- 60DC/24DC/1
2866271
12 V DC ... 24 V DC - / 10 V DC ... 32 V DC Approx. 3.2 A (10 V DC) / 1 A (32 V DC) < 15 A / 1.8 A2s 6.3 A (slow-blow, internal) 24 V DC 1% 22.5 V DC ... 28.5 V DC (> 24 V constant capacity) 1A Yes / No 1.2 W / 5 W > 83% (at 24 V DC and nominal values) < 30 mVPP LED, active switching output 0.2 kg / 22.5 x 99 x 107 mm Horizontal DIN rail NS 35, EN 60715 Can be aligned: Horizontal 0 cm, vertical 5 cm Pluggable screw connection IP20 / II > 500 000 h in acc. with IEC 61709 (SN 29500) -25C ... 70C (> 60C derating) -40C ... 85C 95% (at 25C, no condensation) 1.5 kV (type test) / 1 kV (routine test) Conformance with EMC directive 89/336/EEC EN 60950/VDE 0805 (SELV), EN 61558-2-17 EN 50178/VDE 0160 (PELV) DIN VDE 0100-410, DIN VDE 0106-1010 UL/C-UL listed UL 508, UL/C-UL Recognized UL 60950, UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D
48 V DC ... 60 V DC - / 36 V DC ... 75 V DC Approx. 0.8 A (36 V DC) / 0.4 A (75 V DC) < 15 A / 1.8 A2s 3.15 A (slow-blow, internal) 24 V DC 1% 22.5 V DC ... 28.5 V DC (> 24 V constant capacity) 1A Yes / No 1.2 W / 5 W > 85% (at 60 V DC and nominal values) < 40 mVPP LED, active switching output 0.2 kg / 22.5 x 99 x 107 mm Horizontal DIN rail NS 35, EN 60715 Can be aligned: Horizontal 0 cm, vertical 5 cm Pluggable screw connection IP20 / II > 500 000 h in acc. with IEC 61709 (SN 29500) -25C ... 70C (> 60C derating) -40C ... 85C 95% (at 25C, no condensation) 1.5 kV (type test) / 1 kV (routine test) Conformance with EMC directive 89/336/EEC EN 60950/VDE 0805 (SELV), EN 61558-2-17 EN 50178/VDE 0160 (PELV) DIN VDE 0100-410, DIN VDE 0106-1010 UL/C-UL listed UL 508, UL/C-UL Recognized UL 60950, UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370 Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PHOENIX CONTACT
599

Conversor24 12

Uploaded by

Copyright:

Available Formats

Conversor24 12

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Conversor24 12

Uploaded by

Copyright:

Available Formats

INTERFACE Power Supply

QUINT 24 V DC/24 V DC/10 A

Connection data Input Output Signal

Description DC-DC converter, primary switched mode

INTERFACE Power Supply

MINI 12-24 V DC/24 V DC/1 A

MINI 48-60 V DC/24 V DC/1 A

Connection data Input Output Signal

Connection data M3 M3 M3 Pcs. / Pkt. Input Output Signal

MINI-PS- 12- 24DC/24DC/1

MINI-PS- 48- 60DC/24DC/1

You might also like