3
3
3
https://www.mikrotik.com/client/?ecom=example_test
Search...
home
software
hardware
support
downloads
purchase
training
account
Logout
Overview Support
1. The basic unit of a physical network (OSI Layer 1) is the: Frame Bit Header Byte 2. What protocol does ping use? ARP TCP ICMP UDP 3. Select which of the following are 'Public IP addresses': 10.110.50.37 172.168.254.2 11.63.72.21 192.168.0.1 172.28.73.21 4. You have a router with configuration - Public IP :202.168.125.45/24 - Default gateway:202.168.125.1 - DNS server: 248.115.148.136, 248.115.148.137 - Local IP: 192.168.2.1/24 Mark the correct configuration on client PC to access to the Internet IP:192.168.1.223/24 gateway:248.115.148.136 IP:192.168.2.253/24 gateway:202.168.0.1 IP:192.168.2.115/24 gateway: 192.168.2.1 IP:192.168.0.1/24 gateway:192.168.2.1 IP:192.168.2.2/24 gateway:202.168.125.45 5. How many usable IP addresses are there in a 23-bit (255.255.254.0) subnet? 508 512 254 510 6. A PC with IP 192.168.1.2 can access internet, and static ARP has been set for that IP address on gateway. When the PC Ethernet card failed, the user change it with a new card and set the same IP for it. What else should be done? MAC-address of the new card has to be changed to MAC address of old card Nothing - it will work as before Mikrotik : RouterBOARD : Forum : MUM : Training : Wiki : Tiktube : Newsletters : Twitter
1 de 3
18/04/2012 22:17
https://www.mikrotik.com/client/?ecom=example_test
Another IP has to be added for Internet access 7. Select valid MAC-address 00:00:5E:80:EE:B0 AEC8:21F1:AA44:54FF:1111:DDAE:0212:1201 G2:60:CF:21:99:H0 192.168.0.0/16 8. How many IP addresses can one find in the header of an IP packet? 4 3 2 1 9. What is term for the hardware coded address found on an interface? IP Address FQDN Address Interface Address MAC Address 10. How many usable IP addresses are there in a 20-bit subnet? 2048 2046 4094 4096 2047 11. Select valid subnet masks: 255.255.192.255 255.255.224.0 192.0.0.0 255.192.0.0 12. Is ARP used in the IPv6 protocol ?
false
13. MAC layer by OSI model is also known as Layer 7 Layer 3 Layer 6 Layer 2 Layer 1 14. Which ones of the following are valid IP addresses? 10.10.14.0 192.168.13.255 192.168.256.1 1.27.14.254 15. Choose all valid hosts address range for subnet 15.242.55.62/27 15.242.55.31-15.242.55.62 Mikrotik : RouterBOARD : Forum : MUM : Training : Wiki : Tiktube : Newsletters : Twitter
2 de 3
18/04/2012 22:17
https://www.mikrotik.com/client/?ecom=example_test
15.242.55.33-15.242.55.62 15.242.55.32-15.242.55.63 15.242.55.33-15.242.55.63 16. Which computers would be able to communicate directly (without any routers involved) 192.168.0.5/26 and 192.168.0.100 192.168.17.15/29 and 192.168.17.20/28 10.10.0.17/22 and 10.10.1.30/23 10.5.5.1/24 and 10.5.5.100/25 17. Collisions are possible in full-duplex Ethernet networks
false
18. If ARP=reply-only is enabled on one router interface, router can add dynamic ARP entries for the particular interface. False True 19. The network address is The first address of the subnet The last address of the subnet The first usable address of the subnet 20. If ARP=reply-only is configured on an interface, what will this interface do Add new IP addresses in /ip arp list Accept all MAC-addresses listed in /ip arp as static entries Accept all IP addresses listed in /ip arp as static entries Add new MAC addresses in /ip arp list Accept all IP/MAC combinations listed in /ip arp as static entries
Finish example test
3 de 3
18/04/2012 22:17