Material Science: BY:-Prerna Agrawal
Material Science: BY:-Prerna Agrawal
Material Science: BY:-Prerna Agrawal
BY:PRERNA AGRAWAL
CONTENTS:
What are lubricants? Uses and properties of lubricants Types of lubricants Auxiliaries
INDUSTRIAL LUBRICANTS
Industrial lubricants are basically defined as compounds like fluids, greases and oils. They are used in order to lessen wear and tear of materials while reducing binding and friction. In some extreme cases, they may also prevent or lessen electrical resistivity while it increases thermal conduction. Of course, they are also favored because they can prevent corrosion in both the inner and outer surfaces where they are applied. There are various types of industrial lubricants including low and high viscosity oils, lubricant powders, waxes and high temperature silicates. With lubricating oils, other forms are also seen such as natural and synthetic oils. At times, they may also be combined with waxes or dispersions of solid lubricants. There are still other forms of lubricants used in several industries.
capacitors, electric discharge machining, transformers and other electrical devices. It is also applicable in lubricating, sealing and coating. Among all the uses of dielectric greases and insulating fluids, they are commendable because they have the capacity to provide heat stability and they do not breakdown even at the highest temperature ranges. They are also utilized in dispersing heat from electrical components while they lubricate slide and relay contact switches.
Help parts continue to move in the appropriate manner (i.e. locks, switches, etc.) make a surface water-resistant prevent wear and tear from damaging a surface transfer power (namely hydrostatic power) from one surface to another transmit heat from one surface to another.
PURPOSE
Lubricants perform the following key functions.
Keep moving parts apart Reduce friction Transfer heat Carry away contaminants & debris Transmit power Protect against wear Prevent corrosion Seal for gasses Stop the risk of smoke and fire of objects
Reduce friction
Typically the lubricant-to-surface friction is much less than surface-to-surface friction in a system without any lubrication. Thus use of a lubricant reduces the overall system friction. Reduced friction has the benefit of reducing heat generation and reduced formation of wear particles as well as improved efficiency. Lubricants may contain additives known as friction modifiers that chemically bind to metal surfaces to reduce surface friction even when there is insufficient bulk lubricant present for hydrodynamic lubrication, e.g. protecting the valve train in a car engine at startup.
Transfer heat
Both gas and liquid lubricants can transfer heat. However, liquid lubricants are much more effective on account of their high specific heat capacity. Typically the liquid lubricant is constantly circulated to and from a cooler part of the system, although lubricants may be used to warm as well as to cool when a regulated temperature is required. This circulating flow also determines the amount of heat that is carried away in any given unit of time. High flow systems can carry away a lot of heat and have the additional benefit of reducing the thermal stress on the lubricant. Thus lower cost liquid lubricants may be used. The primary drawback is that high flows typically require larger sumps and bigger cooling units. A secondary drawback is that a high flow system that relies on the flow rate to protect the lubricant from thermal stress is susceptible to catastrophic failure during sudden system shut downs. An automotive oil-cooled turbocharger is a typical example. Turbochargers get red hot during operation and the oil that is cooling them only survives as its residence time in the system is
very short i.e. high flow rate. If the system is shut down suddenly (pulling into a service area after a high speed drive and stopping the engine) the oil that is in the turbo charger immediately oxidizes and will clog the oil ways with deposits. Over time these deposits can completely block the oil ways, reducing the cooling with the result that the turbo charger experiences total failure typically with seized bearings. Non-flowing lubricants such as greases & pastes are not effective at heat transfer although they do contribute by reducing the generation of heat in the first place.
Transmit power
Pascal's law is at the heart of hydrostatic power transmission. Hydraulic fluids comprise a large portion of all lubricants produced in the world.
Prevent corrosion
Good quality lubricants are typically formulated with additives that form chemical bonds with surfaces to prevent corrosion and rust.
system of contaminants and preserve the quality of machine and/or car parts. Depending on their precise use, industrial and automotive lubricants can come in the form of:
greases or powders, as with dry graphite liquids, as with motor oils and fuel additives solids, as with ball bearings or Teflon.
Because some of these lubricants can be used for the same purposes, for many industrial or automotive projects, the nature of the environment in which you use the lubricant will determine which type of lubricant will be most effective. For example, temperature can be a key determinant when choosing between different types of lubricants. In hotter environments or in situations that will generate a lot of heat, solid lubricants work best, as some will still operate effectively at temperatures as high as 350C. However, because solid lubricants also tend to corrode easily, they need to be replaced frequently and, therefore, aren't used much outside of extremely hot situations.
Lubricant Terms
The terms that describe and differentiate various types of lubricants can be confusing, as they aren't necessarily commonly used. Here is a small list of some lubricantrelated terms that will help you understand the unique features of different types of lubricants:
Abrasive refers to lubricants that are particular harsh. These typically require careful handling and special disposal. Additives are ingredients that generally make up less than 10 percent of the lubricant's composition. Different combinations of additives give various lubricants their defining properties. Synthetic refers to lubricants primarily composed of man-made ingredients, as opposed to natural, organic ingredients, such as mineral or vegetable oils. Viscous describes lubricants that are particularly thick and harder to poor. Less viscous lubricants tend to be more watery in nature.
aid the function (and reduce the resistance) of prosthetic organs or body parts cleanse bacteria and other harmful substances from the body facilitate ultrasounds and other imaging tests make certain exams, such as a pelvic exam, more comfortable
prevent tissue damage when medical instruments need to be inserted in patients protect their expensive equipment from daily wear and tear.
As researchers continue studying new compounds and applications, more medical applications for lubricants are sure to arise.
Performance:
The lubricant marketer claims benefits for the customer based on the superior performance of the lubricant. Such marketing is supported by glamorous advertising, sponsorships of typically sporting events and endorsements. Unfortunately broad performance claims are common in the consumer marketplace, which are difficult or impossible for a typical consumer to verify. In the B2B market place the marketer is normally expected to show data that supports the claims, hence reducing the use of broad claims. Increasing performance, reducing wear and fuel consumption is also aim of the later API, ACEA and car manufacturer oil specifications, so lubricant marketers can back their claims by doing extensive (and expensive) testing.
Longevity:
The marketer claims that their lubricant maintains its performance over a longer period of time. For example in the consumer market, a typical motor oil change interval is around the 30006000 miles (750015000 km). The lubricant marketer may offer a lubricant that lasts for 12000 (30000 km) miles or more to convince a user to pay a premium. Typically, the consumer would need to check or balance the longer life and any warranties offered by the lubricant manufacturer with the possible loss of equipment manufacturer warranties by not following its schedule. Many car and engine manufacturers support extended drain intervals, but request extended drain interval certified oil used in that case; and sometimes a special oil filter. Example: In older Mercedes-Benz engines and in truck engines one can use engine oil MB 228.1 for basic drain interval. Engine oils conforming with higher specification MB 228.3 may be used twice as long, oil of MB 228.5 specification 3x longer. Note that the oil drain interval is valid for new engine with fuel conforming car manufacturer specification. When using lower grade fuel, or worn engine the oil change interval has to shorten accordingly. In general oils approved for extended use are of higher specification and reduce wear. In the industrial market place the longevity is generally measured in time units and the lubricant marketer can suffer large financial penalties if their claims are not substantiated.
Efficiency:
The lubricant marketer claims improved equipment efficiency when compared to rival products or technologies, the claim is usually valid when comparing lubricant of higher specification with previous grade. Typically the efficiency is proved by showing a reduction in energy costs to operate the system. Guaranteeing improved efficiency is the goal of some oil test specifications such as API CI-4 Plus for diesel engines. Some car/engine manufacturers also specifically request certain higher efficiency level for lubricants for extended drain intervals.
Operational tolerance:
The lubricant is claimed to cope with specific operational environment needs. Some common environments include dry, wet, cold, hot, fire risk, high load, high or low speed, chemical compatibility, atmospheric compatibility, pressure or vacuum and various combinations. The usual thermal characteristics is outlined with SAE viscosity given for 100C, like SAE 30, SAE 40. For low temperature viscosity the SAE xxW mark is used. Both markings can be combined together to form a SAE 0W-60 for example. Viscosity index (VI) marks viscosity change with temperature, with higher VI numbers being more temperature stable.
Economy:
The marketer offers a lubricant at a lower cost than rivals either in the same grade or a similar one that will fill the purpose for lesser price. (Stationary installations with short drain intervals.) Alternative may be offering a more expensive lubricant and promise return in lower wear, specific fuel consumption or longer drain intervals. (Expensive machinery, unaffordable downtimes.)
Environment friendly:
The lubricant is said to be environmentally friendly. Typically this is supported by qualifying statements or conformance to generally accepted approvals. Several organizations, typically government sponsored, exist globally to qualify and approve such lubricants by evaluating their potential for environmental harm. Typically, the lubricant manufacturer is allowed to indicate such approval by showing some special mark. Examples include the German Blue Angel, European Daisy Eco label, Global Eco-Label GEN mark, Nordic, White Swan, Japanese Earth friendly mark; USA Green Seal, Canadian Environmental Choice, Chinese Huan, Singapore Green Label and the French NF Environment mark.
Composition:
The marketer claims novel composition of the lubricant which improves some tangible performance over its rivals. Typically the technology is protected via formal patents or other intellectual property protection mechanism to prevent rivals from copying. Lot of claims in this area are simple marketing buzzwords, since most of them are related to a manufacturer specific process naming (which achieves similar results than other ones) but the competition is prohibited from using a trademark.
Quality:
The marketer claims broad superior quality of its lubricant with no factual evidence. The quality is proven by references to famous brand, sporting figure, racing team, some professional endorsement or some similar subjective claim. All motor oil labels wear mark similar to "of outstanding quality" or "quality additives," the actual comparative evidence is always lacking.
TYPES OF LUBRICANTS
Gaseous lubricants
Gaseous lubricants have a much lower viscosity and higher compressibility compared to liquid lubricants, but the fluid-film principles apply analogeous to gases. Some examples for gaseous lubricants are air (used in fluid bearings), technical gases, steam or liquid-metal vapours.
Liquid lubricants
Liquid lubricants refer to any lube that has a liquid base. The primary ingredient, which makes up about 60 percent to 90 percent of these types of lubricants, is always some base oil or other liquid. The remainder of the ingredients for liquid lubricants, usually referred to as "additives," changes from manufacturer to manufacturer. Often times, the unique combination of additives is responsible for the nuanced, special features of different types of liquid lubricants. For example, while special additives can make one type of liquid lubricant water-resistant, a different combination of additives can make another lube especially thick, or more "viscous."The word viscous is commonly used to describe lubricants: The less viscous a liquid lubricant is, the more watery it is and, therefore, easier to pour. Liquid lubricants may be characterized in many different ways. One of the most common ways is by the type of base oil used. Following are the most common types.
Lanolin (wool grease, natural water repellant) Water Mineral oils Vegetable (natural oil) Synthetic oils Other liquids
Note: although generally lubricants are based on one type of base oil or another, it is quite possible to use mixtures of the base oils to meet performance requirements.
Lanolin
A natural water repellent, lanolin is derived from sheep wool grease, and is an alternative to the more common petro-chemical based lubricants. This lubricant is also a corrosion inhibitor, protecting against rust, salts, and acids.
Water
Water can be used on its own, or as a major component in combination with one of the other base oils. Commonly used in engineering processes, such as milling and lathe turning.
Mineral oil
This term is used to encompass lubricating base oil derived from crude oil. The American Petroleum Institute (API) designates several types of lubricant base oil. The main constituent of such lubricant product is called the base oil, base stock. While it is advantageous to have a high-grade base oil in a lubricant, proper selection of the lubricant additives is equally as important.
Synthetic oils
Polyalpha-olefin (PAO) Synthetic esters Polyalkylene glycols (PAG) Phosphate esters Alkylated naphthalenes (AN) Silicate esters Ionic fluids
Solid lubricants
While solid lubricants are not used nearly as often as their liquid counterparts, you can find them among some household items you use daily. In fact, the Teflon that lines your pans to prevent food from sticking as you cook is one of the most common types of solid lubricants that people regularly come across. Technically known as Polytetrafluoroethene (PTFE), Teflon is often used to coat the surface of cookware, as well as pipework, due to the fact that it almost never reacts with foreign substances. In practical terms, this means that food, chemicals and even waste products won't stick to or wear down Teflon surfaces. Mineral solid lubricants are another type of solid lube. While these lubricants can be useful in extremely hot conditions when others fail, they do rust quickly. As a result, they aren't widely used because they tend to be too costly. More research needs to be done before minerals can be used as efficient solid lubricants.
Teflon or PTFE
Teflon or PTFE is typically used as a coating layer on, for example, cooking utensils to provide a non-stick surface. Its usable temperature range up to 350C and chemical inertness make it a useful additive in special greases. Under extreme pressures, teflon powder or solids is of little value as it is soft and flows away from the area of contact. Ceramic or metal or alloy lubricants must be used then.
Non-metals
Graphite, hexagonal boron nitride, molybdenum disulfide and tungsten disulfide are examples of materials that can be used as solid lubricants, often to very high temperature. The use of some such materials is sometimes restricted by their poor resistance to oxidation (e.g., molybdenum disulfide can only be used up to 350C in air, but 1100C in reducing environments).
Metal/alloy
Metal alloys, composites and pure metals can be used as grease additives or the sole constituents of sliding surfaces and bearings. Cadmium and Gold are used for plating surfaces which gives them good corrosion resistance and sliding properties, Lead, Tin, Zinc alloys and various Bronze alloys are used as sliding bearings, or their powder can be used to lubricate sliding surfaces alone, or as additives to greases.
Semi-solid:
Greases and petroleum end-products are usually used as semi-solid lubricants. They are preferred over other lubricants because they have high viscosity, high heat capacity, can withstand heavy loads and do not flow easily. Moreover they take a long time to get replenished, so they are used for a longer time.
AUXILIARIES
A chemical or formulated chemical product which enables a processing operation in preparation, dyeing, printing or finishing to be carried out more effectively, or which is essential if a given effect is to be achieved.
1) To prepare or improve the substrate before colouration by wetting 2) To modify the adsorption characteristics or colourants by acceleration or retardation, providing sites for adsorption, creating block or resisting, improving or resisting the migration of dyes. 3) To stabalize the application medium by dye solubility, forming emulsion inhibiting or promoting foam formation stabilizing a dispersion. 4) To improve the fastness of dyeing 5) To enhance the properties of laundering formulations 6) To protect or modify the substrate by lubricating the substrate, creating or resisting the ability of the dye.