PROFESSIONAL LINE - Driver

LOUDSPEAKERS

DH200E

The DH200E driver has a titanium diaphragm carefully designed to cover the frequency range from midrange to treble with high efficiency and low distortion. This astonishing performance was achieved using titanium, a light and strong space age material that allows frequency reproduction from 1.5 to 20 kHz. This way, compact two-way systems can be designed for use as stage monitors, movie theatre systems and home theatre sound reproduction. The driver must be used with active or passive crossover with crossover frequencies of 2 kHz or higher and a slope of at least 12 dB/oct. We suggest the Selenium passive crossover LC12M2K8 (2,000 Hz - 12 dB/oct). The voice coil is made of high temperature wire wound on Kapton former to withstand high operating temperatures. A precisely engineered diaphragm structure and alignment mechanism allows for easy, reliable and cost effective repair in case of diaphragm failure.

DRIVER x HORN CONNECTION

HM17-25E

SPECIFICATIONS Nominal impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Minimum impedance @ 4,250 H z . . . . . . . . . . . . . . . . . . . . . 6.9 Power handling Musical Program(w/ xover 2,000 Hz 12 dB / oct) 1. . . 200 W Sensitivity 2 On horn,1W @ 1m, on axis . . . . . . . . . . . . . . . . . . . . 105 dB SPL Frequency response @ -10 dB. . . . . . . . . . . . . 1,500 to 20,000 Hz Throat diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 (1) mm (in) Diaphragm material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Titanium Voice coil diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 (1.8) mm (in) Re . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8 Flux density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.55 T Minimum recommended crossover (12 dB / oct) . . . . . . . 2,000 Hz
1

HM11-25

DH200E

HM25-25

Specifications to handle normal speech and music program material with 5% maximum acceptable distortion on amplifier, with the recommended passive crossover connected. Power is calculated taking into account the true RMS voltage at amplifier output along with transducer nominal impedance. Musical Program= 2 x W RMS. 2 Measured with HM17-25E horn, 1,500 - 8,000 Hz average.

HL14-25

ADDITIONAL INFORMATION Magnet material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Barium ferrite Magnet weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 (15) g (oz) Magnet diameter x depth . . . . . . . . . . . . . . 102 x 14 (4.02 x 0.55) mm(in) Magnetic assembly weight . . . . . . . . . . . . . . . . . . . . 1,200 (2.65) g (lb) Housing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Plastic Housing finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Black Magnetic assembly steel finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Zinc-plated Voice coil material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copper Voice coil former material . . . . . . . . . . . . . . . . . . . . . . . . . Polyimide (Kapton ) Voice coil winding length. . . . . . . . . . . . . . . . . . . . . . . 2.8 (9.19) m (ft) Voice coil winding depth . . . . . . . . . . . . . . . . . . . . . . . 2.2 (0.09) mm (in) Wire temperature coefficient of resistance (25) . . . . . 0.00380 1/C Volume displaced by driver . . . . . . . . . . . . . . . . . . . . . 0.4 (0.014) l (ft 3) Net weight (1 piece). . . . . . . . . . . . . . . . . . . . . . . . . . 1,350 (2.98) g (lb) Gross weight (6 pieces per carton). . . . . . . . . . . . . 8,400 (18.52) g (lb)
Carton dimensions (W x D x H) . . . . . . . . 35.5 x 24 x 9 (14 x 9.5 x 3.5) c m (in)

102

70

W1 3/8" - 18TPI

25

55

15

MOUNTING INFORMATION Horn connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Screw-on 1 3/8 - 18 TPI Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Push terminals Polarity . . . . . . . . . . . . . . . . . . . Positive voltage applied to the positive terminal (red) gives diaphragm motion toward the throat

Dimensions in mm.

Page: 1/2 Ed.: 00 - 04/01

PROFESSIONAL LINE - Driver

DH200E
HARMONIC DISTORTION CURVES W / HM17-25E HORN, 10 W / 1 m.
140 120

110

100
100

90

80

80

70 200 500 Response Curve. 1k 2k Hz 5k 10k 20k

60 200 500 1k 2k Hz 5k 10k 20k Response Curve. Distortion Curve, 2nd harmonic. Distortion Curve, 3rd harmonic.

IMPEDANCE AND PHASE CURVES MEASURED W/ HM17-25E HORN IN FREE-AIR.

POLAR RESPONSE CURVES 1 kHz

2 kHz
0 -6 -10 -20 dB 330 300 60 30

4 kHz
0 -6 -10 -20 dB 330 300

10

15

60

90

270 90

270 90

270

120

240 150 180 210

120 150 180 210

240

120 150 180 210

240

8 kHz
0 200 500 Impedance Curve. Phase Curve. 1k 2k Hz 5k 10k 20k -15
60 30 0 -6 -10 -20 dB 330 300

90

270

DH200E driver coupled to a HM17-25E h orn.

120

240 150 180 210

HARMONIC DISTORTION CURVES W/ HM17-25E HORN , 1 W / 1 m.

Polar Response Curve, Horizontal. Polar Response Curve, Vertical.

100

80

HOW TO CHOOSE THE RIGHT AMPLIFIER The power amplifier must be able to supply twice the RMS driver power. This 3 dB headroom is necessary to handle the peaks that are common to musical programs. When the amplifier clips those peaks, high distortion arises and this may damage the transducer due to excessive heat. The use of compressors is a good practice to reduce music dynamics to safe levels. FINDING VOICE COIL TEMPERATURE It is very important to avoid maximum voice coil temperature. Since moving coil resistance (RE ) varies with temperature according to a well known law, we can calculate the temperature inside the voice coil by measuring the voice coil DC resistance:
R 1 TB = TA + B 1 TA 25 + R 25 A

60

40 200 500 1k 2k Hz 5k 10k 20k Response Curve. Distortion Curve, 2nd harmonic. Distortion Curve, 3rd harmonic.

T A , TB= voice coil temperatures in C. R A , RB= voice coil resistances at temperatures T A and TB, respectively. 25= voice coil wire temperature coefficient at 25 C.

Kapton : Du Pont trademark.

Specifications subject to change without prior notice. Page: 2/2 Ed.: 00 - 04/01

EUROPE Address: BRAZIL Address: USA Address: SELENIUM EUROPE ELETRNICA SELENIUM S.A. SELENIUM LOUDSPEAKER USA BR 386 Km 435 / 92.480-000 Rohrbergstrasse 23B 1701 South Park Court, Bldg 102 D-65343 Eltville - Germany Chesapeake, VA 23320 - USA Nova Santa Rita - RS - Brazil Phone: +(49) 6123 601570 Phone: (757) 424-7516 / (800) 562-0510 Fax: +(55) 51 479-1120 Fax: +(49) 6123 601587 URL: www.selenium.com.br Fax: (757) 424-5246 E-mail: sales@selenium-eu.com E-mail: export@selenium-usa.com URL: www.seleniumloudspeakers.com URL: www.seleniumloudspeakers.com