M28B SERVICE MANUAL

Part I Part II Part III Part IV Part V Part VI Part VII

Caution .. 2 Product specification .6 BOM list ... .8 Safety & EMC Components 27 Adjusting Description . . . 28 Troubleshooting 35 Technical support list . 47

TTE China Manufacturing Center

CAUTION: Use of controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure. CA UTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION
RISK OF ELECTRIC ELECTRIC SHOCK DO NOT OPEN.

The lighting flash with arrowhead symbol, with an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the person. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:
Read all of these instructions. Save these instructions for later use. Follow all Warnings and Instructions marked on the audio equipment. 1. Read Instructions- All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions- All operating and use instructions should be followed.

FOR YOUR PERSONAL SAFETY

1. 2. 3. 4. 5. 6. 7. 8. 9. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to qualified service personnel. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to traffic or abuse. This may result in a shock or fire hazard. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet and refer servicing to qualified service personnel. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to qualified service personnel. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and should use a mounting kit approved by the manufacturer. 10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

PROTECTION AND LOCATION OF YOUR SET

11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall outlet and refer servicing to qualified service personnel.

12. Choose a place where light (artificial or sunlight) does not shine directly on the screen. 13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists. 14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to protect it from overheating. These openings must not be blocked or covered. Never cover the slots or openings with cloth or other material. Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc. Never place the set near or over a radiator or heat register. Never place the set in a built-in enclosure, unless proper ventilation is provided.

PROTECTION AND LOCATION OF YOUR SET

15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No. 70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrode, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD- IN WIRE

GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

ELECTRIC SERVICE EQUIPMENT

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS NEC-NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

15.2. Note to CATV system installer : (Only for the television set with CATV reception) This reminder is provided to call the CATV system installer s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning and power-line surges.

17.

OPERATION OF YOUR SET

18. This television set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply at your home, consult your television dealer or local power company. For television sets designed to operate from battery power, refer to the operating instructions. If the television set does not operate normally by following the operating instructions, unplug this television set from the wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the television set to normal operation. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on a holiday, turn the television set off and unplug the television set from the wall outlet.

19.

20.

IF THE SET DOES NOT OPERATE PROPERLY

21. If you are unable to restore normal operation by following the detailed procedure in your operating instructions, do not attempt any further adjustment. Unplug the set and call your dealer or service technician. 22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for service, unplug the set and have it checked by a professional service technician. 23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your dealer or service technician.

FOR SERVICE AND MODIFICATION

24. Do not use attachments not recommended by the television set manufacturer as they may cause hazards. 25. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 26. Upon completion of any service or repairs to the television set, ask the service technician to perform routine safety checks to determine that the television is in safe operating condition.

PFS2 FORMAT-1 Report Date:2003-11-13 16:45 ProductView......: Report by............: Specs / Products
MasterData Customer Id

Product: ET-2185A
EVGO GROUP

Version Status Brand EAN UPC Reception +Tuning - presets/channels +Tuning - technology +Tuning - Indication +Freq Bands +Channels +IF Freq +TV Systems Off Air +Add Systems Ext In +TV Systems Multi +Sound Systems Picture - Processing +Scan +Scan Modes +Wide Screen Switching +Combfilter +Picture Control

0.1 New EVGO \ \ 100 VST X HYPER BAND CATV 470MHz PICTURE 38.9MHz PAL B/G NTSC 3.58, NTSC 4.43, NTSC Play Back, PAL 60 PAL AV-STEREO Standard 4;3

+Pict Enhancement +Pict Noise Reduction Picture - Display +Display Type +Screen Format +Size(Visual)" - size/vis. cm +Deflection System (CRT only) +Tube Technology (CRT only) +CRT Defl +CRT Gun +CRT Magn field +Resolution +Coating (only for D.V. sets) +White Point Sound +RMS Power Intern +RMS Power Extern +Surround Sound +Sound Features +Sound Control Sound - Speakers +Speaker configuration +Speakers used +Speaker Size User Interface +Interface Name +Voice Control +Menu +Menu Colours +Menu Languages +Special Features +Operational Features +PP Features +Tuning/Install Features

Brightness, Colour, Contrast, Color Temperature, Hue, Sharpness Cont Var, Smart Pict. 4 Modes Black Stretch NR DV - CRT - RF 4:3 21 Black Matrix, Iron Stand Gun Neutral

Volume

L01- Full Interface Cursor Control Thailand Auto Standby, Manual Skip, Personal Zapping Alternate Channel Auto Store, Factory Mode, Fine Tuning, Manual Search/Store, Manual Sort, Service Mode Clock, On/off timer, Sleep timer Channel +-, Volume +-, TV/AV,MENU, Power Switch, 2127 PFS 1 of 3

+Clock/Timer Functions +Local Controls Front

2003-11-14 13:00

Date:2003-11-13 16:45 ProductView......: Report by............: Specs / Products

+Local Controls Top +Indicators - screen +Indicators - front +Numb of Loc Cont (incl Mains) +Number of Ind. (incl Mains) +Local Controls (Old) Remote Control Connectors Rear +Scart RGB+Y/C+CVBS +Scart RGB+CVBS +Scart CVBS+Y/C +Component In (Y/U/V) Cinch +In Y/C+Cinch(CVBS+St) +In Y/C+Cinch(CVBS+Mo) +In Y/C+Cinch(St) +In BNC (CVBS) +In Cinch(CVBS+St) +In Cinch(CVBS+Mo) +Out Cinch(CVBS+St) +Out Cinch(CVBS+Mo) +Out Cinch Audio Stereo +Out Cinch Audio Mono +Out Cinch Dolby Surround +Out Cinch Subwoofer +Dig Audio Out +Loudspeakers +Control Busses +Feature Slot +ITV Smart Port +Terr. Antenna in Guide + IR Blaster Jack Connectors Front +In Y/C + Cinch(CVBS+St) +In Y/C + Cinch Stereo +In Cinch (CVBS + St) +In Cinch (CVBS+Mo) +Headphone Out +Feature Slot Connectors Side +In Y/C + Cinch(CVBS+St) +In Y/C + Cinch Stereo +In Cinch (CVBS + St) +IN Cinch (CVBS + Mo) +Headphone Out Connectors Top +In Cinch (CVBS + St) +Headphone Out Connectors Mechanical +Headphone +Cinch A/V in/out +Cinch Component +Cinch Y/C Styling +Cabinet Name +Configuration +Graphics/Logo's -Cabinet Colour and Finish Silver Frost +Mechanics +Speaker Visibility General +Segment +Chassis +Software Delivery Mode +Software Version +Mains Voltage +Mains Frequency +Type Mains Cord Power Consumption (P)TV in On Power Consumption SB in Watts Power Consumption Semi SB in W +Power in "ON" for 2003-11-14 13:00 2127 PFS

Product: ET-2185A
RC Recvd LED, SB LED 7 1

75 Ohms (IEC type)

2127 RC115

Standard Standard 4:3 M28B

180-240V 50/60Hz

Less than 9W

2 of 3

Date:2003-11-13 16:45 ProductView......: Report by............: Specs / Products

+Power in Standby for +Power in "OFF" for Weight (P)TV (incl. Packaging) Weight (P)TV (excl. Package) Weight AVUnit excl Packaging +INDICATION on BACKCOVER +Channel Final Equipment +Packaging - methods +Documents and manuals +Languages DFU +Cables Supplied +Antenna Supplied +Stand Supplied +Aux Equipm Supplied Packaging - width cm Packaging - height cm Packaging - depth cm Miscellaneous +EAN Indication +Approbation +Tests +Local Integration Various Perf. Param. +Service Call-Rate PIP/POP +Type +Features Digital Reception +Transmission Built-in Data System +Text Standard +(Tele)text Features +Nbr bckgrnd page / Mem Size +Text Technology +Digital Data handling +Program Guide Built-in Clock/Timer +Type +Features Built-in Radio +Type Built-in PC display +PC Synch +PC Control Built-in DVD drive +Type of Medium +Type of Deck +Version of Deck Phased Out Items +Tuner/Frontend +Sensitivity +CRT EHT +Lightning Protection +Account +XX(Radio Antenna in) +Non Volatile Memory +In Y/C + Cinch(CVBS+Mo) Version of deck

Product: ET-2185A

No

No No No

2003-11-14 13:00

2127 PFS

3 of 3

PART X. BOM List

ITEM DESCRIPTION T6-015W30-A101XZ ASS'Y -REMOTE CONTROL ARF 06-015W30-A101X T8-01427H-RC1 54-114000-00X 59-130460-00X 62-314340-0UN 62-345700-0UN 63-B40200-AB3 63-W30100-AB4 63-W30100-AB4 T8-01427H-RC1Z 55-1475RC-5CN 58-1427MP-JKT 58-2106RI-RUI REMOTE CONTROL (M28-2) REAR CABINET COMPONENT FELT (150MMX19MMX0.3MM) RUBBER PAD (25MMX7MM) FBT SUPPORTER HIPS-KINGFA 113 (VO) ATTACHMENT PIPS-KINGFA 113 (VO) S/T SCREW B 4 X 20 AB S/T SCREW W 3 X 10 AB S/T SCREW W 3 X 10 AB ASS'Y -R.CABARF 1475REARCABINET PLATE MODEL NO. INLAY REAR AV RAIL FOR M.BD TRACK(R. CAB.) MTG FRONT & REAR CAB. MTG M.BD TRACK & REAR CAB. MTG SUPPORTER BKT & R.CAB. TAPE STICK ON REAR CAB. STICK ON REAR CAB. (FOOTING) 4.000 2.000 1.000 1.000 4.000 2.000 2.000 1.000 1.000 1.000 1.000 1.000 1.000 D501 D502 Q501 Q502 Q503 R501 R504 R507 R522 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 BOM text QTY 1.000 1.000 1.000

T8-1427MH-MA3SM X ASS'Y -CHASSISPARTS T8-01418H-CRY 10-1N4148-ABX 10-1N4148-ABX 11-SA1015-YBX 11-SC2482-0BX 11-SC2482-0BX 11-SC2482-0BX 18-CB0101-JNX 18-CB0101-JNX 18-CB0101-JNX 18-CB0102-JNX 18-CB0272-JNX 18-CB0472-JNX 18-CB0472-JNX 18-CB0472-JNX CRTBD DIODE 1N4148 (SWITCHING) DIODE 1N4148 (SWITCHING) TRANSISTOR 2SC2482 TRANSISTOR 2SC2482 TRANSISTOR 2SC2482 RES. C.F. 100 OHM 1/6W +/-5% RES. C.F. 100 OHM 1/6W +/-5% RES. C.F. 100 OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5%

TRANSISTOR ST2SA1015Y (PNP) Q510

RES. C.F. 2.7K OHM 1/6W +/-5% R524 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R502 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R505 CARBON RES. C.F. 4.7K OHM R508

1/6W +/-5% 18-CB0681-JNX 18-CB0681-JNX 18-CB0681-JNX 18-CB0681-JNX 18-CB0751-JNX 18-CB0751-JNX 18-CB0751-JNX 18-CD0104-JNX 18-FE0272-JNX 18-FE0272-JNX 18-FE0272-JNX 18-FG0153-JHX 18-FG0153-JHX 18-FG0153-JHX 25-BCB221-M1X 25-BLB109-M1X 26-AIM103-KBX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP181-JCS 26-EBP181-JCS 26-EBP181-JCS 26-EBP681-JCS 26-EBP681-JCS 26-EBP681-JCS 35-139730-00X 40-2113MH-CRC1X 41-WJ0070-B00 46-10967W-01X 46-33624H-04X 46-35038H-05X T8-01427H-AVY 40-2175MU-SIC 46-30790H-06X RES. C.F. 680 OHM 1/6W +/-5% RES. C.F. 680 OHM 1/6W +/-5% RES. C.F. 680 OHM 1/6W +/-5% RES. C.F. 680 OHM 1/6W +/-5% RES. C.F. 750 OHM 1/6W +/-5% RES. C.F. 750 OHM 1/6W +/-5% RES. C.F. 750 OHM 1/6W +/-5% RES. C.F. 100K OHM 1/4W +/-5% R523 R525 R526 R527 R503 R506 R509 R521 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 2.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 P1104B FOR M. BD P904 P1101(FOR P1101 P1102 & P1103) & 1.000 1.000 1.000 1.000 1.000 1.000

RES. M.O. 2.7K OHM 1/2W +/-5% R514 RES. M.O. 2.7K OHM 1/2W +/-5% R515 RES. M.O. 2.7K OHM 1/2W +/-5% R518 RES. M.O. 15K OHM 2W +/-5% RES. M.O. 15K OHM 2W +/-5% RES. M.O. 15K OHM 2W +/-5% CAP. ELEC 220 UF 16V +/-20% CAP. ELEC 1 UF 250V +/-20% R510 R511 R512 C508 C506

CAP. CER 0.01UF 500V +/-10% B C504 CAP. CER 0.01UF 50V +80/-20% F C507 CAP. CER 0.01UF 50V +80/-20% F C514 CAP. CER 180 PF 50V +/-5% CAP. CER 180 PF 50V +/-5% CAP. CER 180 PF 50V +/-5% CAP. CER 680 PF 50V +/-5% CAP. CER 680 PF 50V +/-5% CAP. CER 680 PF 50V +/-5% FERR. BEAD BF60 P.C.B. CRT BD WIRE BARE JUMPER 7MM PIN BASE *1 TJC1-1A HS 3P 2468#24 TJC3-4Y/SCN-4Y HS 5P24 380 TJC3-5Y/SCN-5Y SIDEAVBD P.C.B. SIDE AV BD HS UL #24 400 TJC3-6Y/SCN-6Y 270 P502 FOR M. BD P402 P501 FOR M. BD P201 C510 C511 C512 C501 C502 C503 FOR C514 (L505 & L506) J501 P503

47-RCA020-XX1 RCA SOCKET Y/W/R T8-1427MH-MA3HM ASS'Y -CHASSISM.BDPARTS T8-01418H-PW1 10-0FR104-FBX 10-0FR104-FBX

DIODE FR104 (FAST RECTIFIER) D805 DIODE FR104 (FAST RECTIFIER) D806

10-0FR104-FBX 10-0FR104-FBX 10-0FR104-FBX 10-0FR104-FBX 10-0RL255-EBX 10-0RL255-EBX 10-0RL255-EBX 10-0RL255-EBX 10-0RU3AM-F0X 10-1N4148-ABX 10-1N4148-ABX 10-1N4148-ABX 10-79C3V9-DBX 10-79C5V6-DBX 10-79C9V1-DBX 11-SA1015-YBX 11-SA1015-YBX 11-SC1959-YBX 11-SC5586-0AX 18-CB0472-JNX 18-CB0472-JNX 18-CD0103-JNX 18-CD0272-JNX 18-CD0331-JNX 18-CD0392-JNX 18-CD0472-JNX 18-CF0224-JHX 18-CF0224-JHX 18-EF0228-JGX 18-EF0228-JGX 18-EF0228-JGX 18-FF0229-JGX 18-FG0153-JHX 18-FH0270-JLX 18-FJ0390-JJX 18-GJ0229-KUX

DIODE FR104 (FAST RECTIFIER) D807 DIODE FR104 (FAST RECTIFIER) D830 DIODE FR104 (FAST RECTIFIER) D831 DIODE FR104 (FAST RECTIFIER) D831A DIODE RL255 OR RL206(POWER RECTIFIER) D801 DIODE RL255 OR RL206(POWER RECTIFIER) D802 DIODE RL255 OR RL206(POWER RECTIFIER) D803 DIODE RL255 OR RL206(POWER RECTIFIER) D804 DIODE RU3AM RECOVERY) (FAST D824 D811 D812 D813 D808A D808 D809

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

DIODE 1N4148 (SWITCHING) DIODE 1N4148 (SWITCHING) DIODE 1N4148 (SWITCHING) DIODE ZENER 3V9 1/2W 5% DIODE ZENER 5V6 1/2W 5% DIODE ZENER 9V1 1/2W 5%

TRANSISTOR ST2SA1015Y (PNP) Q801 TRANSISTOR ST2SA1015Y (PNP) Q802 TRANSISTOR 2SC1959-Y TRANSISTOR 2SC5586 Q803 Q804

CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R807 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R817 RES. C.F. 10K OHM 1/4W +/-5% R805 RES. C.F. 2.7K OHM 1/4W +/-5% RES. C.F. 330 OHM 1/4W +/-5% RES. C.F. 3.9K OHM 1/4W +/-5% RES. C.F. 4.7K OHM 1/4W +/-5% RES. C.F. 220K OHM 1W +/-5% RES. C.F. 220K OHM 1W +/-5% RES. FUS. 0.22 OHM 1W +/-5% RES. FUS. 0.22 OHM 1W +/-5% RES. FUS. 0.22 OHM 1W +/-5% RES. M.O. 2.2 OHM 1W +/-5% RES. M.O. 15K OHM 2W +/-5% RES. M.O. 27 OHM 3W +/-5% RES. M.O. 39 OHM 5W +/-5% RES. CEMENT 2.2 OHM R806 R811 R808 R812 R803 R803A R831 R831A R832 R813 R824 R814 R816 5W R804

+/-10% 18-GJ0339-KUX 18-KE0475-JNX 18-KE0475-JNX 18-RG0338-JFX 20-TR102H-5CX 22-PTC200-XX0 25-BCA102-M1X 25-BCB330-M1X 25-BCB471-M1X 25-BDB101-M1X 25-BDB101-M1X 25-BHB100-M1X 25-PJG101-M1X 25-BMJ101-M1X 26-AIC221-KBX 26-AIC221-KBX 26-AIC221-KBX 26-AIC391-KBX 26-AIM103-KBX 26-AIM103-KBX 26-AMK331-JZX 26-APK102-ME4 26-AQK472-ZFX 26-AQK472-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 27-ALQ222-J0X 27-AQT224-MV3 27-MBC104-J0X 27-MBC333-J0X 27-MHM104-K0X 34-A608K6-1BX 34-R101K2-1BX 35-139730-00X RES. WIRE ROUND 3.3 OHM 5W +/-10% R801 RES. GLASS GLAZE 4.7M OHM 1/2W +/-5% R835 RES. GLASS GLAZE 4.7M OHM 1/2W +/-5% R835A RES. WIRE ROUND 0.33 OHM 2W +/-5% R815 TRIMMER B1K HORIZ TYPE VR801 POSISTOR 20 OHM (25-34) CAP. ELEC 1000 UF 16V +/-20% CAP. ELEC 33 UF 16V +/-20% CAP. ELEC 470 UF 16V +/-20% CAP. ELEC 100 UF 25V +/-20% CAP. ELEC 100 UF 25V +/-20% CAP. ELEC 10 UF 100V +/-20% CAP.CELE 100UF/160V/+/-20% CAP. ELEC 100 UF 400V +/-20% CAP. CER 220 PF 500V +/-10% B CAP. CER 220 PF 500V +/-10% B CAP. CER 220 PF 500V +/-10% B CAP. CER 390 PF 500V +/-10% B CAP. CER 0.01UF 500V +/-10% B CAP. CER 0.01UF 500V +/-10% B CAP. CER 330 PF 2KV +/-5% SL CAP. CER +80%-20% F CAP. CER +80%-20% F 4700PF 4700PF 250VAC C804 250VAC C805 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 2.000 1.000 RT801 C845 C812 C842 C810 C845A C811 C827 C806 C840 C843 C843A C805A C814 C826 C830 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

CAP. CER 1000PF 400VAC+/-20% E C835

CAP. CER 0.01UF 50V +80/-20% F C841 CAP. CER 0.01UF 50V +80/-20% F C844 CAP. CER 0.01UF 50V +80/-20% F C844A CAP. M.PP 0.0022UF 1.6KV +/-5% C809 CAP.M.PP 0.22UF 250VAV +/-20% CAP. M.P.E 0.1 UF 63V +/-5% CAP. M.P.E 0.033UF 63V +/-5% CAP. M.P.E 0.1 UF 400V +/-10% COIL CHOKE 0.6 UH +/-10% COIL CHOKE 100 UH +/-10% FERR. BEAD BF60 C801 C808 C807 C803 L801 L804 FOR D824

35-139730-00X 35-139730-00X 35-139730-00X 35-237250-00X 36-LIF004-AX0 36-TRF130-AX0 41-WJ0100-B00 41-WJ0100-B00 41-WJ0150-B00 46-10962W-02X 46-28559W-02X 48-POW001-AX0 50-02000D-1GS1 51-DC0243-0CH01 64-P30100-104 65-Z30050-23M 66-20516X-0B0 66-343730-0B0 66-343730-0B0 66-343730-0B0 66-343730-0B0 66-343730-0B0 66-382330-0B7 67-H28649-1A0 71-DYP000-WX1 90-0DSTG1-SR1U T8-1427MH-MA3 02-IRR001-XX1 07-380VI5-NA7 10-0FR104-FBX 10-0FR104-FBX 10-0FR104-FBX 10-1N4001-EBX 10-1N4002-EBX 10-1N4148-ABX

FERR. BEAD BF60 FERR. BEAD BF60 FERR. BEAD BF60 FERR. BEAD HF70 4.5X5.0 LINE FILTER TRANSFORMER BCK-3559 WIRE BARE JUMPER 10MM WIRE BARE JUMPER 10MM WIRE BARE JUMPER 15MM PIN BASE *2 TJC2-2A PIN BASE *2 TJC1-2A SWITCH POWER

FOR D830 FOR D831 FOR D831A FOR R815 T801 T802 L802 L803 J801 P801 P802 SW801

2.000 2.000 2.000 2.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 2.000 3.000 4.000 4.000 6.000 7.000 8.000 1.000 1.000 0.300 1.000

FUSE 2.0AT 250VAC 5MMX20MM F801 POWER CORD VDE PLUG W/HOUSING M/C SCREW P 3 X 10 NUT M 3 FUSE HOLDER HOLLOW 1.6MMX3.0MMX3.2MM HOLLOW 1.6MMX3.0MMX3.2MM HOLLOW 1.6MMX3.0MMX3.2MM HOLLOW 1.6MMX3.0MMX3.2MM HOLLOW 1.6MMX3.0MMX3.2MM RIVET 2.0X3.7X3.5 HEAT SINK LABEL HEAT SINK DSTG-1 IR RECEIVER HRM380017 TUNER TCL79107D5B3 MODULE IR001 TU101 RIVET FOR RT801 RIVET FOR L804,D830 RIVET FOR T801 RIVET FOR C801,C827,D824 RIVET FOR T802 FOR R801,R804,C806,P801 FOR Q804 STICK ON H.SINK(Q804) MTG Q804 FOR Q804 FOR FUSE

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

DIODE FR104 (FAST RECTIFIER) D401 DIODE FR104 (FAST RECTIFIER) D402 DIODE FR104 (FAST RECTIFIER) D403 DIODE 1N4001 (RECTIFIER) DIODE 1N4002 (RECTIFIER) DIODE 1N4148 (SWITCHING) D301 D405 D002

10-1N4148-ABX 10-1N4148-ABX 10-1N4148-ABX 10-1N4148-ABX 10-1N4148-ABX 10-1N4148-ABX 10-79C5V1-DBX 10-79C6V2-DBX 10-79C8V2-DBX 10-CW574C-DJX 11-2N3904-0BX 11-C124ES-0BX 11-C144ES-0BX 11-C144ES-0BX 11-C144ES-0BX 11-DD1555-0AX 11-SA1015-YBX 11-SA1015-YBX 11-SA1015-YBX 11-SA1015-YBX 11-SA1015-YBX 11-SA1015-YBX 11-SC1815-YBX 11-SC1815-YBX 11-SC1815-YBX 11-SC1815-YBX 11-SC1815-YBX 11-SC1815-YBX 11-SC1815-YBX 11-SC1815-YBX 11-SC2482-0BX 11-SC3779-DBX 11-SK2541-0BX 13-000040-53P 13-000040-66P 13-00M24C-08P 13-0STV93-02S 13-A30V02-TOP 13-0L7805-CVS 13-0L7805-CVS 13-0L7809-CVS

DIODE 1N4148 (SWITCHING) DIODE 1N4148 (SWITCHING) DIODE 1N4148 (SWITCHING) DIODE 1N4148 (SWITCHING) DIODE 1N4148 (SWITCHING) DIODE 1N4148 (SWITCHING) DIODE ZENER 5V1 1/2W 5% DIODE ZENER 6V2 1/2W 5% DIODE ZENER 8V2 1/2W 5% DIODE CW574CD TRANSISTOR 2N3904 (NPN)

D005 D006 D007 D008 D206 D601 D001 D404 D205 D102 Q103

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

TRANSISTOR PDTC124ES (NPN)Q604 TRANSISTOR PDTC144ES (NPN) Q204 TRANSISTOR PDTC144ES (NPN) Q606 TRANSISTOR PDTC144ES (NPN) Q607 TRANSISTOR 3DD1555 Q402 TRANSISTOR ST2SA1015Y (PNP) Q003 TRANSISTOR ST2SA1015Y (PNP) Q005 TRANSISTOR ST2SA1015Y (PNP) Q202 TRANSISTOR ST2SA1015Y (PNP) Q209 TRANSISTOR ST2SA1015Y (PNP) Q210 TRANSISTOR ST2SA1015Y (PNP) Q605 TRANSISTOR 2SC1815-Y (NPN) TRANSISTOR 2SC1815-Y (NPN) TRANSISTOR 2SC1815-Y (NPN) TRANSISTOR 2SC1815-Y (NPN) TRANSISTOR 2SC1815-Y (NPN) TRANSISTOR 2SC1815-Y (NPN) TRANSISTOR 2SC1815-Y (NPN) TRANSISTOR 2SC1815-Y (NPN) TRANSISTOR 2SC2482 TRANSISTOR 2SC3779D AMPL) FET 2SK2541(N-CHANNEL) IC 4053 (ANALOG SW) IC 4066 (ANALOG SW.) IC STV9302 MCU TMPA8821 +5V 1.5A IC L7805CV +5V 1.5A IC L7805CV IC L7809 SGS (TO-220) (RF Q101 Q203 IC901 IC603 IC301 IC201 IC402 Q002 IC401 Q206 Q207 Q208 Q603 Q608 Q609 Q904 Q905 Q401

IC EEPROM 8K M24C08 (WRITE) IC001

13-TDA705-7AS 14-LED05R-XX1 18-CB0101-JNX 18-CB0101-JNX 18-CB0101-JNX 18-CB0101-JNX 18-CB0101-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0102-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0103-JNX 18-CB0104-JNX 18-CB0122-JNX 18-CB0123-JNX 18-CB0132-JNX

IC TDA7057AQ (R/L AUDIO O/P) LED RED FB205 RES. C.F. 100 OHM 1/6W +/-5% RES. C.F. 100 OHM 1/6W +/-5% RES. C.F. 100 OHM 1/6W +/-5% RES. C.F. 100 OHM 1/6W +/-5% RES. C.F. 100 OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 1K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 100K OHM 1/6W +/-5% RES. C.F. 1.2K OHM 1/6W +/-5% RES. C.F. 12K OHM 1/6W +/-5% RES. C.F. 1.3K OHM 1/6W +/-5%

IC601 D051B R001A R033 R034 R047 R218 R005 R013 R015 R029 R116 R239 R240 R241 R415 R604A R610 R622 R637 R905 R907 R908 R912 R961 R962 R001 R009 R017 R019 R030 R032 R240A R406 R611 R614 R918 R919 R031 R016 R212 R010

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

18-CB0151-JNX 18-CB0151-JNX 18-CB0151-JNX 18-CB0152-JNX 18-CB0152-JNX 18-CB0153-JNX 18-CB0153-JNX 18-CB0182-JNX 18-CB0221-JNX 18-CB0221-JNX 18-CB0221-JNX 18-CB0221-JNX 18-CB0223-JNX 18-CB0223-JNX 18-CB0223-JNX 18-CB0224-JNX 18-CB0271-JNX 18-CB0272-JNX 18-CB0273-JNX 18-CB0303-JNX 18-CB0331-JNX 18-CB0331-JNX 18-CB0331-JNX 18-CB0332-JNX 18-CB0332-JNX 18-CB0333-JNX 18-CB0333-JNX 18-CB0333-JNX 18-CB0333-JNX 18-CB0392-JNX 18-CB0392-JNX 18-CB0392-JNX 18-CB0392-JNX 18-CB0432-JNX 18-CB0470-JNX 18-CB0470-JNX 18-CB0471-JNX 18-CB0471-JNX 18-CB0471-JNX 18-CB0471-JNX 18-CB0471-JNX 18-CB0471-JNX

RES. C.F. 150 OHM 1/6W +/-5% RES. C.F. 150 OHM 1/6W +/-5% RES. C.F. 150 OHM 1/6W +/-5% RES. C.F. 1.5K OHM 1/6W +/-5% RES. C.F. 1.5K OHM 1/6W +/-5% RES. C.F. 15K OHM 1/6W +/-5% RES. C.F. 15K OHM 1/6W +/-5% RES. C.F. 1.8K OHM 1/6W +/-5% RES. C.F. 220 OHM 1/6W +/-5% RES. C.F. 220 OHM 1/6W +/-5% RES. C.F. 220 OHM 1/6W +/-5% RES. C.F. 220 OHM 1/6W +/-5% RES. C.F. 22K OHM 1/6W +/-5% RES. C.F. 22K OHM 1/6W +/-5% RES. C.F. 22K OHM 1/6W +/-5% RES. C.F. 220K OHM 1/6W +/-5% RES. C.F. 270 OHM 1/6W +/-5% RES. C.F. 2.7K OHM 1/6W +/-5% RES. C.F. 27K OHM 1/6W +/-5% RES. C.F. 30K OHM 1/6W +/-5% RES. C.F. 330 OHM 1/6W +/-5% RES. C.F. 330 OHM 1/6W +/-5% RES. C.F. 330 OHM 1/6W +/-5% RES. C.F. 3.3K OHM 1/6W +/-5% RES. C.F. 3.3K OHM 1/6W +/-5% RES. C.F. 33K OHM 1/6W +/-5% RES. C.F. 33K OHM 1/6W +/-5% RES. C.F. 33K OHM 1/6W +/-5% RES. C.F. 33K OHM 1/6W +/-5% RES. C.F. 3.9K OHM 1/6W +/-5% RES. C.F. 3.9K OHM 1/6W +/-5% RES. C.F. 3.9K OHM 1/6W +/-5% RES. C.F. 3.9K OHM 1/6W +/-5% RES. C.F. 4.3K OHM 1/6W +/-5% RES. C.F. 47 OHM 1/6W +/-5% RES. C.F. 47 OHM 1/6W +/-5% RES. C.F. 470 OHM 1/6W +/-5% RES. C.F. 470 OHM 1/6W +/-5% RES. C.F. 470 OHM 1/6W +/-5% RES. C.F. 470 OHM 1/6W +/-5% RES. C.F. 470 OHM 1/6W +/-5% RES. C.F. 470 OHM 1/6W +/-5%

R115 R117 R217 R022 R311 R111 R112 R023 R201 R202 R203 R220 R014 R215 R235 R206 R233 R024 R922A R205 R219 R227 R228 R046 R218A R110 R232 R602 R922 R007 R213 R214 R307 R025 R002 R018 R020 R119 R238 R243 R401 R923

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

18-CB0472-JNX 18-CB0472-JNX 18-CB0472-JNX 18-CB0472-JNX 18-CB0472-JNX 18-CB0472-JNX 18-CB0472-JNX 18-CB0472-JNX 18-CB0472-JNX 18-CB0472-JNX 18-CB0473-JNX 18-CB0473-JNX 18-CB0473-JNX 18-CB0473-JNX 18-CB0473-JNX 18-CB0473-JNX 18-CB0473-JNX 18-CB0473-JNX 18-CB0473-JNX 18-CB0473-JNX 18-CB0473-JNX 18-CB0512-JNX 18-CB0560-JNX 18-CB0561-JNX 18-CB0564-JNX 18-CB0622-JNX 18-CB0681-JNX 18-CB0681-JNX 18-CB0683-JNX 18-CB0750-JNX 18-CB0820-JNX 18-CB0820-JNX 18-CB0821-JNX

CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R003 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R004 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R011 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R041 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R244 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R308 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R612 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R613 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R633 CARBON RES. C.F. 4.7K OHM 1/6W +/-5% R636 RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 47K OHM 1/6W +/-5% RES. C.F. 5.1K OHM 1/6W +/-5% RES. C.F. 56 OHM 1/6W +/-5% RES. C.F. 560 OHM 1/6W +/-5% RES. C.F. 560K OHM 1/6W +/-5% RES. C.F. 6.2K OHM 1/6W +/-5% RES. C.F. 680 OHM 1/6W +/-5% RES. C.F. 680 OHM 1/6W +/-5% RES. C.F. 68K OHM 1/6W +/-5% RES. C.F. 75 OHM 1/6W +/-5% RES. C.F. 82 OHM 1/6W +/-5% RES. C.F. 82 OHM 1/6W +/-5% RES. C.F. 820 OHM 1/6W +/-5% R109 R216 R245 R926 R927 R928 R929 R930 R931 R935 R936 R042 R114 R209 R210 R026 R028 R222 R211 R904 R906 R914 R118

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

18-CB0822-JNX 18-CB0822-JNX 18-CD0100-JNX 18-CD0479-JNX 18-CE0229-JNX 18-CE0331-JNX 18-CE0560-JNX 18-EF0109-JGX 18-EF0109-JGX 18-EF0109-JGX 18-EF0109-JGX 18-FE0120-JNX 18-FF0103-JGX 18-FF0123-JGX 18-FF0560-JGX 18-FG0153-JHX 18-GJ0332-JUX1 18-RG0228-JHX 25-BCA102-M1X 25-BCB100-M1X 25-BCB100-M1X 25-BCB100-M1X 25-RCB100-M1X 25-BCB100-M1X 25-BCB100-M1X 25-BCB100-M1X 25-BCB100-M1X 25-BCB100-M1X 25-BCB101-M1X 25-BCB101-M1X 25-BCB101-M1X 25-BCB220-M1X 25-BCB220-M1X 25-BCB220-M1X 25-BCB220-M1X 25-BCB220-M1X 25-BCB221-M1X 25-BCB221-M1X 25-BCB221-M1X 25-BCB221-M1X 25-BCB331-M1X

RES. C.F. 8.2K OHM 1/6W +/-5% RES. C.F. 8.2K OHM 1/6W +/-5% RES. C.F. 10 OHM 1/4W +/-5% RES. C.F. 4.7 OHM 1/4W +/-5% RES. C.F. 2.2 OHM 1/2W +/-5% RES. C.F. 330 OHM 1/2W +/-5% RES. C.F. 56 OHM 1/2W +/-5% RES. FUS. 1 OHM 1W +/-5% (LS) RES. FUS. 1 OHM 1W +/-5% (LS) RES. FUS. 1 OHM 1W +/-5% (LS) RES. FUS. 1 OHM 1W +/-5% (LS) RES. M.O.F 12 OHM 1/2W +/-5% RES. M.O. 10K OHM 1W +/-5% RES. M.O. 12K OHM 1W +/-5% RES. M.O. 56 OHM 1W +/-5% RES. M.O. 15K OHM 2W +/-5% RES.C.C.5W 3.3KOHM +/-5%

R006 R237 R027 R640 R314 R409 R317 R403 R405 R416 R418 R236 R410 R408 R108 R404 R402

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

RES. WIRE ROUND 0.22 OHM 2W +/-5% R620 CAP. ELEC 1000 UF 16V +/-20% C416A CAP. ELEC 10 UF 16V +/-20% CAP. ELEC 10 UF 16V +/-20% CAP. ELEC 10 UF 16V +/-20% CAP.ELEC 10 UF 16V +/-20% CAP. ELEC 10 UF 16V +/-20% CAP. ELEC 10 UF 16V +/-20% CAP. ELEC 10 UF 16V +/-20% CAP. ELEC 10 UF 16V +/-20% CAP. ELEC 10 UF 16V +/-20% CAP. ELEC 100 UF 16V +/-20% CAP. ELEC 100 UF 16V +/-20% CAP. ELEC 100 UF 16V +/-20% CAP. ELEC 22 UF 16V +/-20% CAP. ELEC 22 UF 16V +/-20% CAP. ELEC 22 UF 16V +/-20% CAP. ELEC 22 UF 16V +/-20% CAP. ELEC 22 UF 16V +/-20% CAP. ELEC 220 UF 16V +/-20% CAP. ELEC 220 UF 16V +/-20% CAP. ELEC 220 UF 16V +/-20% CAP. ELEC 220 UF 16V +/-20% CAP. ELEC 330 UF 16V +/-20% C004 C023 C220 C227 C242 C904 C905 C907 C908 C211 C240 C605 C015 C016 C086 C906 C909 C217 C231 C635 C903 C009

25-BCB470-M1X 25-BCB470-M1X 25-BCB470-M1X 25-BCB470-M1X 25-BCB470-M1X 25-BCB470-M1X 25-BDA102-M1X 25-BDA471-M1X 25-BEA221-M1X 25-BEA471-M1X 25-BEB101-M1X 25-BFB109-M1X 25-BFB109-M1X 25-BFB109-M1X 25-BFB109-M1X 25-BFB109-M1X 25-BFB229-M1X 25-RFB229-M1X 25-BFB478-M1X 25-BFB479-M1X 25-BFB479-M1X 25-BFB479-M1X 25-BFB479-M1X 25-BFB479-M1X 25-BFB479-M1X 25-BFB479-M1X 25-BFB479-M1X 25-BHB100-M1X 25-PJA470-M1X 25-BLA100-M1X 25-DFB109-M1X 25-GFB228-K1X 25-GFB478-K1X 25-GFB478-K1X 26-ABC102-KBX 26-AIC102-KBX 26-AIC102-KBX 26-AIC332-KBX 26-AIC391-KBX 26-AIC391-KBX 26-AIC391-KBX 26-EBP100-JCS

CAP. ELEC 47 UF 16V +/-20% CAP. ELEC 47 UF 16V +/-20% CAP. ELEC 47 UF 16V +/-20% CAP. ELEC 47 UF 16V +/-20% CAP. ELEC 47 UF 16V +/-20% CAP. ELEC 47 UF 16V +/-20% CAP. ELEC 1000 UF 25V +/-20% CAP. ELEC 470 UF 25V +/-20% CAP. ELEC 220 UF 35V +/-20% CAP. ELEC 470 UF 35V +/-20% CAP. ELEC 100 UF 35V +/-20% CAP. ELEC 1 UF 50V +/-20% CAP. ELEC 1 UF 50V +/-20% CAP. ELEC 1 UF 50V +/-20% CAP. ELEC 1 UF 50V +/-20% CAP. ELEC 1 UF 50V +/-20% CAP. ELEC 2.2 UF 50V +/-20% CAP.ELEC 2.2UF 50V +/-20% CAP. ELEC 0.47 UF 50V +/-20% CAP. ELEC 4.7 UF 50V +/-20% CAP. ELEC 4.7 UF 50V +/-20% CAP. ELEC 4.7 UF 50V +/-20% CAP. ELEC 4.7 UF 50V +/-20% CAP. ELEC 4.7 UF 50V +/-20% CAP. ELEC 4.7 UF 50V +/-20% CAP. ELEC 4.7 UF 50V +/-20% CAP. ELEC 4.7 UF 50V +/-20% CAP. ELEC 10 UF 100V +/-20% CAP.CELE 47UF/160V/+/-20% CAP. ELEC 10 UF 250V +/-20% CAP. ELEC 1 UF 50V +/-20% NP CAP. ELEC 0.22 UF 50V +/-10% CAP. ELEC 0.47 UF 50V +/-10% CAP. ELEC 0.47 UF 50V +/-10% CAP. CER 1000 PF 50V +/-10% B

C081 C108 C202 C232 C418 C423 C308 C604 C302 C413 C303 C203 C208 C214 C622 C624 C008A C307 C218 C030 C101 C103 C216 C305 C601 C602 C603 C420 C411 C408 C916 C205 C234 C236 C112

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

CAP. CER 1000 PF 500V +/-10% B C401 CAP. CER 1000 PF 500V +/-10% B C404 CAP. CER 3300 PF 500V +/-10% B C407 CAP. CER 390 PF 500V +/-10% B C409 CAP. CER 390 PF 500V +/-10% B CAP. CER 390 PF 500V +/-10% B CAP. CER 10 PF 50V +/-5% C412 C414 C304

26-EBP101-JCS 26-EBP102-KBS 26-EBP102-KBS 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP103-ZFX 26-EBP104-ZFS 26-EBP181-JCS 26-EBP220-JCS 26-EBP221-JCS 26-EBP221-JCS 26-EBP221-JCS 26-EBP270-JCS 26-EBP270-JCS 26-EBP331-JCS 26-EBP331-JCS 26-EBP390-JCS 26-EBP390-JCS 26-EBP471-JCS 27-AGQ563-J0X 27-MBC103-J0X

CAP. CER 100 PF 50V +/-5% CAP. CER 1000 PF 50V +/-20%

C932 C219

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

CAP. CER 1000 PF 50V +/-20% C306 CAP. CER 0.01UF 50V +80/-20% F C005 CAP. CER 0.01UF 50V +80/-20% F C017 CAP. CER 0.01UF 50V +80/-20% F C019 CAP. CER 0.01UF 50V +80/-20% F C020 CAP. CER 0.01UF 50V +80/-20% F C024 CAP. CER 0.01UF 50V +80/-20% F C082 CAP. CER 0.01UF 50V +80/-20% F C109 CAP. CER 0.01UF 50V +80/-20% F C110 CAP. CER 0.01UF 50V +80/-20% F C114 CAP. CER 0.01UF 50V +80/-20% F C135 CAP. CER 0.01UF 50V +80/-20% F C201 CAP. CER 0.01UF 50V +80/-20% F C212 CAP. CER 0.01UF 50V +80/-20% F C221 CAP. CER 0.01UF 50V +80/-20% F C228 CAP. CER 0.01UF 50V +80/-20% F C230 CAP. CER 0.01UF 50V +80/-20% F C233 CAP. CER 0.01UF 50V +80/-20% F C237 CAP. CER 0.01UF 50V +80/-20% F C239 CAP. CER 0.01UF 50V +80/-20% F C241 CAP. CER 0.01UF 50V +80/-20% F C415 CAP. CER 0.01UF 50V +80/-20% F C417 CAP. CER 0.01UF 50V +80/-20% F C425 CAP. CER 0.01UF 50V +80/-20% F C636 CAP. CER 0.01UF 50V +80/-20% F C931 CAP. CER 0.1UF 50V +80%/-20% CAP. CER 180 PF 50V +/-5% CAP. CER 22 PF 50V +/-5% CAP. CER 220 PF 50V +/-5% CAP. CER 220 PF 50V +/-5% CAP. CER 220 PF 50V +/-5% CAP. CER 27 PF 50V +/-5% CAP. CER 27 PF 50V +/-5% CAP. CER 330PF 50V +/-5% CAP. CER 330PF 50V +/-5% CAP. CER 39PF 50V +/-5% CAP. CER 39PF 50V +/-5% CAP. CER 470 PF 50V +/-5% CAP. M.PP 0.056 UF 250V +/-5% CAP. M.P.E 0.01UF 63V+/-5% C226 C207 C225 C007 C104 C427 C010 C011 C003 C006 C021 C022 C008 C410 C215

27-MBC104-J0X 27-MBC104-J0X 27-MBC104-J0X 27-MBC104-J0X 27-MBC224-J0X 27-PBC152-J0X 27-PBC222-J0X 27-PBC222-J0X 27-PBC272-J0X 27-PBC472-J0X 27-PBC472-J0X 27-PBC473-J0X 27-PBC562-J0X 27-PBC822-J0X 27-RCP333-J0X 34-A109K0-1IX 34-R100J2-0EX 34-R100J2-0EX 34-R220J2-0EX 34-R220J2-0EX 34-R220J2-0EX 34-R270J2-0EX 34-R330J2-0EX 36-HDR001-AX1 40-2111MH-MAF1X 41-WJ0050-B00 41-WJ0050-B00 41-WJ0050-B00 41-WJ0050-B00 41-WJ0050-B00 41-WJ0050-B00 41-WJ0055-B00 41-WJ0055-B00 41-WJ0055-B00 41-WJ0055-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00

CAP. M.P.E 0.1 UF 63V +/-5% CAP. M.P.E 0.1 UF 63V +/-5% CAP. M.P.E 0.1 UF 63V +/-5% CAP. M.P.E 0.1 UF 63V +/-5% CAP. M.P.E 0.22UF 63V +/-5% CAP. P.E 0.0015UF 63V +/-5% CAP. P.E 0.0022UF 63V +/-5% CAP. P.E 0.0022UF 63V +/-5% CAP. P.E 0.0027UF 63V +/-5% CAP. P.E 0.0047UF 63V +/-5% CAP. P.E 0.0047UF 63V +/-5% CAP. P.E 0.047 UF 63V +/-5% CAP. P.E 0.0056UF 63V +/-5% CAP. P.E 0.0082UF 63V +/-5% CAP. PP 0.033 UF 100V +/-5% COIL CHOKE 1 UH +/-10% COIL PL - 10 UH +/-5% COIL PL - 10 UH +/-5% COIL PL - 22 UH +/-5% COIL PL - 22 UH +/-5% COIL PL - 22 UH +/-5% COIL PL - 27 UH +/-5% COIL PL - 33 UH +/-5% TRANSFOR HOR. (MAGNETIC CORE) P.C.B. MAIN BD WIRE BARE JUMPER 5MM WIRE BARE JUMPER 5MM WIRE BARE JUMPER 5MM WIRE BARE JUMPER 5MM WIRE BARE JUMPER 5MM WIRE BARE JUMPER 5MM WIRE BARE JUMPER 5.5 MM WIRE BARE JUMPER 5.5 MM WIRE BARE JUMPER 5.5 MM WIRE BARE JUMPER 5.5 MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM DRIVE

C106 C301 C309 C610 C105 C209 C204 C213 C210 C607 C608 C107 C422 C235 C405 L103 L002 L204 L201 L207 L208 L209 L080 T401 FOR Q903 (B) - (E) J025 JP104 JP106 L101 L202 J008 J015 J303 J915 C243 C915 J010 J023 J210 J218

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0060-B00 41-WJ0065-B00 41-WJ0065-B00 41-WJ0065-B00 41-WJ0065-B00 41-WJ0065-B00 41-WJ0065-B00 41-WJ0070-B00 41-WJ0070-B00 41-WJ0070-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0085-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0075-B00 41-WJ0075-B00

WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6MM WIRE BARE JUMPER 6.5MM WIRE BARE JUMPER 6.5MM WIRE BARE JUMPER 6.5MM WIRE BARE JUMPER 6.5MM WIRE BARE JUMPER 6.5MM WIRE BARE JUMPER 6.5MM WIRE BARE JUMPER 7MM WIRE BARE JUMPER 7MM WIRE BARE JUMPER 7MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 8.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 7.5MM

J219 J222 J226 J301 J406 J901 J901A J916 J919 JP101 JP909 JP919 R008 R012 R021A R130 R200 R917 J108 J208 J608 J912 J914 JP225 J011 J107 J911 D204 J001 J005 J013 J205 J206 J209 J305 J407 J602 J603 J905 J906 J907 J909

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

41-WJ0075-B00 41-WJ0085-B00 41-WJ0085-B00 41-WJ0090-B00 41-WJ0075-B00 41-WJ0090-B00 41-WJ0090-B00 41-WJ0090-B00 41-WJ0095-B00 41-WJ0095-B00 41-WJ0100-B00 41-WJ0100-B00 41-WJ0100-B00 41-WJ0100-B00 41-WJ0100-B00 41-WJ0100-B00 41-WJ0100-B00 41-WJ0105-B00 41-WJ0105-B00 41-WJ0105-B00 41-WJ0110-B00 41-WJ0110-B00 41-WJ0115-B00 41-WJ0115-B00 41-WJ0125-B00 41-WJ0125-B00 41-WJ0125-B00 41-WJ0125-B00 41-WJ0125-B00 41-WJ0125-B00 41-WJ0125-B00 41-WJ0125-B00 41-WJ0130-B00 41-WJ0135-B00 41-WJ0135-B00 41-WJ0135-B00 41-WJ0145-B00 41-WJ0150-B00 41-WJ0150-B00 41-WJ0150-B00 41-WJ0150-B00 41-WJ0150-B00

WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 8.5MM WIRE BARE JUMPER 8.5MM WIRE BARE JUMPER 9MM WIRE BARE JUMPER 7.5MM WIRE BARE JUMPER 9MM WIRE BARE JUMPER 9MM WIRE BARE JUMPER 9MM WIRE BARE JUMPER 9.5MM WIRE BARE JUMPER 9.5MM WIRE BARE JUMPER 10MM WIRE BARE JUMPER 10MM WIRE BARE JUMPER 10MM WIRE BARE JUMPER 10MM WIRE BARE JUMPER 10MM WIRE BARE JUMPER 10MM WIRE BARE JUMPER 10MM WIRE BARE JUMPER 10.5MM WIRE BARE JUMPER 10.5MM WIRE BARE JUMPER 10.5MM WIRE BARE JUMPER 11MM WIRE BARE JUMPER 11MM WIRE BARE JUMPER 11.5MM WIRE BARE JUMPER 11.5MM WIRE BARE JUMPER 12.5MM WIRE BARE JUMPER 12.5MM WIRE BARE JUMPER 12.5MM WIRE BARE JUMPER 12.5MM WIRE BARE JUMPER 12.5MM WIRE BARE JUMPER 12.5MM WIRE BARE JUMPER 12.5MM WIRE BARE JUMPER 12.5MM WIRE BARE JUMPER 13MM WIRE BARE JUMPER 13.5MM WIRE BARE JUMPER 13.5MM WIRE BARE JUMPER 13.5MM WIRE BARE JUMPER 14.5MM WIRE BARE JUMPER 15MM WIRE BARE JUMPER 15MM WIRE BARE JUMPER 15MM WIRE BARE JUMPER 15MM WIRE BARE JUMPER 15MM

J913 J227 J924 J103 J104 J601 J902 J903 J212 J904 J221 J302 J307 J401 J403 J605 J922 J223 J224 J910 J009 J014 J217 J604 J002 J003 J102 J211 J216 J306 J414 R306 J204 J006 J215 J918 J105 J106 J112 J402 J408 J410

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

41-WJ0150-B00 41-WJ0150-B00 41-WJ0165-B00 41-WJ0170-B00 41-WJ0175-B00 41-WJ0175-B00 41-WJ0180-B00 41-WJ0195-B00 41-WJ0195-B00 45-OSC8M0-0Y0 45-SAW295-9M0 45-TRA5M5-0Y0 45-TRA6M5-0Y0 46-12866W-02X 46-20598W-04X 46-33079W-02X 46-33079W-03X 46-33079W-05X 46-33079W-06X 46-35179W-04X 47-SCA001-XX0 48-TAC002-XX0 48-TAC002-XX0 48-TAC002-XX0 48-TAC002-XX0 48-TAC002-XX0 48-TAC002-XX0 62-226920-0HA 62-227680-0UA 62-291630-0HH 63-B40150-AB2 64-P30060-104 64-P30100-104 64-P30100-104 65-Z30050-23M 66-343730-0B0 66-343730-0B0

WIRE BARE JUMPER 15MM WIRE BARE JUMPER 15MM WIRE BARE JUMPER 16.5MM WIRE BARE JUMPER 17MM WIRE BARE JUMPER 17.5MM WIRE BARE JUMPER 17.5MM WIRE BARE JUMPER 18MM WIRE BARE JUMPER 19.5MM WIRE BARE JUMPER 19.5MM CRYSTAL 8.0MHZ SAW FILTER 38MHZ) K2959M (PIF

J415 R620A J220 J411 J004 J409 R045 J412 J413 X001 Z101 X203 X201 P601 FOR FRONT CAB. (SPK) P401 FOR DY CONNECTOR P602 FOR FRONT CAB. (SPK) P203 P201 FOR CRT BD P501 P904 FOR SIDE AV BD P402 FOR CRT BD P502 S001 S002 S003 S004 S005 S006

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

CER TRAP TPS 5.5MHZ CER TRAP TPS 6.5MHZ PIN BASE *2 S11-02Y PIN BASE *4 TJC1-4A PIN BASE *2 TJC3-2A PIN BASE *3 TJC3-3A PIN BASE *5 TJC3-5A PIN BASE *6 TJC3-6A PIN BASE TJC3-4A TACT SWITCH TACT SWITCH TACT SWITCH TACT SWITCH TACT SWITCH TACT SWITCH LED HOLDER ABS-LG H121 (HB) BRACKET ABS-KINGFA 606 (UO) MTG SPACER FBT&H.SINK S/T SCREW B 4 X 15 AB M/C SCREW P 3 X 6 M/C SCREW P 3 X 10 M/C SCREW P 3 X 10 NUT M 3 HOLLOW 1.6MMX3.0MMX3.2MM HOLLOW RIVET

SCART SOCKET 21 PINS SS101-P P901

FOR FBT & H.SINK FOR IC401 & IC402 FOR IC601 FOR Q402 & IC301 FOR Q402 & IC301 FOR L411 RIVET FOR L412

1.000 2.000 2.000 2.000 2.000 2.000 2.000

1.6MMX3.0MMX3.2MM 66-343730-0B0 66-343730-0B0 66-343730-0B0 66-382330-0B7 67-H10918-4M2 67-H30752-3A0 67-H30752-9A0 67-H34423-HA0 70-271510-00A 71-270870-0A9 90-269080-ZU0U 10-79C6V2-DBX 10-79C6V2-DBX 41-WJ0060-B00 T8-250250-SKY 74-045045-40F 75-369900-C00 76-002135-0AC 74-015020-50Q T8-325000-SKY 76-002091-0AT 76-326350-01A 75-388320-CC0 T8-1427MH-PA1 49-382550-BAT 75-1465LL-CC1 75-1465LR-CC1 75-1465UL-CC1 75-1465UR-CC1 T8-1427MH-PA3Z 72-1427MH-E50 74-081081-80HAA 76-001465-0AT 74-022032-6WE 62-377580-0HD HOLLOW 1.6MMX3.0MMX3.2MM HOLLOW 1.6MMX3.0MMX3.2MM HOLLOW 1.6MMX3.0MMX3.2MM RIVET 2.0X3.7X3.5 HEAT SINK HEAT SINK HEAT SINK HEAT SINK SERVICE CARD LABEL CLEAN COATING 14KG/BARREL TC-131L 0.100 D207 D210 JP107 1.000 1.000 1.000 1.000 1.000 1.170 0.042 FOR CRT BD PACKING 1.000 1.000 0.036 0.619 0.003 1.000 2.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 FOR MANUAL COVER OPERATION 1.000 2.000 RIVET FOR Q402 RIVET FOR C402,C421 RIVET FOR T402 FOR R402 FOR IC401 & IC402 FOR IC301 FOR Q402 FOR IC601 FOR PRODUCTION USE 9.000 2.000 2.000 1.000 1.000 1.000 1.000 2.000 4.000 3.000

DIODE ZENER 6V2 1/2W 5% DIODE ZENER 6V2 1/2W 5% WIRE BARE JUMPER 6MM SKD POLYBAG W/ANTISTATIC MAIN PCB SKD POLYFOAM BASIN CARTON BOX PLASTIC BAG CARTON BOX LWH 624X384X556MM CARTON SHEET 61X37X0.3CM POLYFOAM BOARD ASS'Y - PACKING BATTERY R06P AA 1.5V 5# POLYFOAM LL POLYFOAM LR POLYFOAM UL POLYFOAM UR ASS'Y -PACKINGPARTSARF OPERATION MANUAL POLYBAG (81CMX81CM) CARTON BOX POLYBAG (23CMX34CMX0.06MM) SAFEGUARDING

PP-H1500 (HB) POLYBAG FOR 74-010050-40C (10CMX50CM) MANTCH TUBE T8-14OFSN-CH1HBB ASSEMBIY(MAIN BD) T8-14OFSN-CCH1HB M28B B 26-AMK102-KBX 47-CRT001-XX1 CAP. CER 1000 PF 2KV +/-10% B SOCKET CRT GZS8-6-AC C505 FOR CRT POWER 1.000 NOMINAL 1.000 1.000 1.000 1.000 1.000 CRT01 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 0.320 4.000 4.000

T8-14OFSN-FCH1HB M28B B 44-14OFSN-CH1A CRT A34AGT13X18 T8-14OFSN-MCH1H BB M28B 18-CB0103-JNX 18-CB0123-JNX 18-CB0243-JNX 18-CB0363-JNX 18-CE0152-JNX 18-CE0272-JNX 18-EG0159-JHX 18-FF0122-JGX 18-FF0189-JGX 18-FF0221-JGX 26-AMK331-JZX 27-AGQ304-JSX 27-ALR762-J0X 36-LIN720-XX1 37-050119-1400X 41-WJ0075-B00 T8-A1427H-FCY 02-GND014-XX0 36-DEG140-AX0 42-50916D-XX0 42-50916D-XX0 46-13902H-02X 46-27250H-02X 54-113970-0U0 54-114000-00X 54-205140-000 RES. C.F. 10K OHM 1/6W +/-5% RES. C.F. 12K OHM 1/6W +/-5% RES. C.F. 24K OHM 1/6W +/-5% RES. C.F. 36K OHM 1/6W +/-5% RES. C.F. 1.5K OHM 1/2W +/-5% RES. C.F. 2.7K OHM 1/2W +/-5% RES. FUS. 1.5 OHM 2W +/-5% RES. M.O. 1.2K OHM 1W +/-5% RES. M.O. 1.8 OHM 1W +/-5% RES. M.O. 220 OHM 1W +/-5% CAP. CER 330 PF 2KV +/-5% SL CAP. M.PP 0.3 UF 250V +/-5% R309 R310 R414 R312 R316 R315 R407 R441 R313 R336 C406B C421

CAP. M.PP 0.0076UF 1.6KV +/-5% C402 COIL LINEARITY 72 UH L412 FLYBACK JF0501-1914 (14/HF/RL) T402 WIRE BARE JUMPER 7.5MM ASS"Y - CRT GND WIRE&HOUSE DEGAUSSING COIL 1080+20MM SPEAKER 16 OHM 5W (50MMX90MM) W601 SPEAKER 16 (50MMX90MM) OHM 5W W602 P601H FOR M. BD P601 P602H FOR M. BD P602 FOR SPK HOUSING TAPE STICK ON F.CAB L411

HS 2P 2468#22 360 S11-2Y/7MM HS 2P24 450/5 F/W TJC3-02H PVC TUBE AWG NO.5 FELT (150MMX19MMX0.3MM)

SPACER CRT MOUNTING T=2MM MTG CRT & F. CAB.

54-314740-0X0 57-10654X-00F 59-130460-00X 62-216340-0UN 62-262660-0HN 62-345690-1UN 63-B30080-AB4 63-B30080-AB4 63-H50250-BF4 63-W30080-AB4 63-W30080-AB4 63-W30100-AB4 65-A50200-20E 67-X12668-0E0 67-X24970-0E0 T8-A1427H-FCYZ 55-1427FC-1CA 56-1427FB-0HA 56-1427LS-0HC 56-1427PK-0HA 56-379890-0HN 58-1418SI-4UI

CRT FIBRE (22MMX22MMX0.8MM) TWIST TIE NY66

SHEET MTG CRT & FRONT CAB. STICK FOR FOOTING CABINET CORD

8.000 10.000 2.000 1.000 1.000

RUBBER PAD (25MMX7MM) HOLDER POWER HIPS-KINGFA 113(VO)

POWER SW.ADAPTER ASSISTANT RAIL HIPS-KINGFA FOR M.BD 113 (VO) CAB.) S/T SCREW B 3 X 8 AB S/T SCREW B 3 X 8 AB S/T SCREW H 5 X 25 BF S/T SCREW W 3 X 8 AB S/T SCREW W 3 X 8 AB S/T SCREW W 3 X 10 AB WASHER 5 X 20 X 2MM SPRING 6MMX40MMX0.5MM SPRING ASS'Y -F.CABARF 1427FRONTCABINET PUSH BUTTON LENS POWER KNOB DECORATIVE KNOB INLAY SIDE AV CRT

TRACK(F. 1.000 1.000 3.000 4.000 2.000 8.000 2.000 4.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

MTG LENS & F. CAB. MTG PUSH BUTTON & F. CAB. MTG CRT & FRONT CAB. MTG SIDE AV BD & F. CAB. MTG SPK & F. CAB. MTG M.BD TRACK & F. CAB. MTG CRT

74

Service Manual

TCL OVERSEAS HOLDINGS LIMITED

PART XI. Safety & EMC Components

In order to guarantee the safety & EMC of the product, ensure to replace the following components with ones that have the same type and specification. Safety Components No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Isolating Resistor Isolating Capacitor Degaussing Coil Switch Transformer Flyback Transformer Socket CRT Fuse Power Switch PCB Rear Cabinet Power Cord CRT Name R812 C816 L803 T803 T402 S501 F801 S801 Location No.

EMC Components No. 1 2 3 4 5 6 Tuner Rectifier Diode Power Filter SAW Filter Switch Transformer Ferrite Bead Name TU101 DB801 T801 Z101 T803 L805 Z1101 Location No.

Flowchart chart of alignment procedure for M28B chassis:

B+ adjustment NICAM Adjustment Electrical properties checking for chassis Adjustment of screen voltage and focus QC checking RF AGC adjustment

Sub-brightness Adjustment

White balance Adjustment

Aging

Sub-color & Sub-tint adjustment

Pincushion and screen width adjustment

Screen center & size adjustment (PAL)

Screen center & size adjustment (NTSC)

ALIGNMENT PROCEDURE FOR M28B CHASSIS:

I) Adjustment of B+ voltage 1. Apply 150-260VAC(5V) to mains power input, and Philips standard testing pattern to RF input. 2. Adjust VR801 in STANDARD mode until voltage at TP2 (B+) is 112V 0.5V. II) NICAM Adjustment (for NICAM model only) 1. 2. 3. 4. Apply a 38.9MHz color bar with NICAM signal to the IF input. Monitor the DC voltage at pin 15 of IC1101. Adjust T1101 until the voltage at pin 15 of IC1101 becomes 2.5 +/- 0.1V. Then check the waveform at pin 4 and 6 of P1103 and it must show correct audio signal.

III) The alignment of RFAGC 1. Connect the detector shown below to collector of Q101. 2. Receive a grey scale signal with 70dBV amplitude. 3. Adjust RFAGC item until the output of the detector becomes 0.8Vpp

Collector of Q101

To CRO

IV) Adjustment of Sub-contrast, Sub-tint and Sub-colour for NSTC and PAL signal. 1. Enter D-mode, and connect the probe of Oscilloscope to the conjunction between R201 and P201 (B-out). 2. Apply the Grey-scale/Colour-bar (NTSC signal) to the AV input, in STANDARD status. 3. Select CNTC to adjust the sub-contrast, until that the amplitude A is 2.5V P-P as shown below. 4. Select COLC to adjust the sub-colour by tuning the amplitude of a and d to the same. 5. Select TNTC to adjust the sub-tint by tuning the amplitude of b and c to the same. 6. Apply the Grey-scale/Colour-bar (PAL signal) to the AV input, in STANDARD status. 7. Select COLP to adjust the sub-colour by tuning the amplitude of a, b, c and d to the same.

c d

V) Adjustment of Focus, Screen Voltage and Sub-brightness 1. Receive a crosshatch pattern. 2. Adjust the FOCUS VR on the flyback the make the picture clear. 3. Enter D-mode and press MUTE key and the screen will become a horizontal line. Then adjust the SCREEN VR on the flyback transformer to set the intensity of the line to a minimum visible level (the line can just be seen). 4. Press MUTE key again and the TV will become full raster. 5. Select BRTC to adjust the sub-brightness, until that the 2nd dark bar of 8 level grey scales just can be seen. VI) Adjustment of White balance 1. Receive a black and white pattern at STANDARD status. 2. Use a color analyzer to measure the black side of the screen. By changing the value of BB and GB, set the reading of the color analyzer to x=284, y=299. 3. Then measure the white side of the screen. By changing the value of BD and GD, set the reading of the color analyzer to x=284, y=299. 4. Repeat step 2&3 until you can get the correct reading for both black and white sides. VII) Adjustment of Pincushion and Picture Width (for pure flat model only) 1. Receive a crosshatch pattern. 2. Adjust VR302 until the vertical line become straight. 3. Adjust VR303 for horizontal size.

VIII) Adjustment of Picture Geometry (PAL) 1. 2. 3. 4. 5. 6. Apply the crosshatch pattern (PAL signal) to the RF input, in STANDARD status. Select HPOS to adjust the Horizontal center. Select VP50 to adjust the Vertical center. Select HIT to adjust the Vertical amplitude. Select VLIN to adjust the vertical linearity. Select VSC to adjust the vertical S-correction.

IX) Adjustment of Picture Geometry (NTSC) 1. 2. 3. 4. 5. 6. Apply the crosshatch pattern (NTSC signal) to the RF input, in STANDARD status. Select HPS to adjust the Horizontal center. Select VP60 to adjust the Vertical center. Select HITS to adjust the Vertical amplitude. Select VLIS to adjust the vertical linearity. Select VSS to adjust the vertical S-correction.

X) Adjustment of OSD position 1. Enter D-mode and press key 1, then choose OSDH(OSDHS) item and adjust the OSD vertical position 50HZ(60HZ). 2. Enter D-mode and press key NOTE, then choose the OSD1 item and adjust the OSD horizontal position(Volume bar,Picture bar,Half blue panel OSD). 3. Enter D-mode and press key NOTE, then choose the OSD2 item and adjust the OSD horizontal position except OSD1 item. XI)D-mode: 1. press D-Mode ON/OFF key, and then you can enter the D-mode. 2. press VOLUME DOWN key on the unit until the volume decrease to minimum level, then press the DISPLAY key on the remote handset (dont release the volume key) and you can enter D- mode. After enter D-mode you can adjust the setting according to the following procedure,

ITEM GROUP1 RB GB BB GD BD GROUP2 HPOS/ HPS HIT/ HITS VP50 VP60 VLIN VLIS VSC VSS VBLK VCEN OSDH OSDHS GROUP 3 CNTX CNTN BRTX BRTN COLX COLN TNTX TNTN GROUP 4 BRTC COLC COLS COLP SCOL SCNT CNTC TNTC GROUP 5 ST3 SV3 ST4 SV4 SVD ASSH SHPX

Description KEY 0 R CUT OFF G CUT OFF B CUT OFF G DRIVE B DRIVE KEY 1 Horizontal Position 50HZ Horizontal Position 60HZ Hight 50Hz hight 60 hz Vertical Position 50Hz Vertical Position 60HZ V Linearity 50Hz V Linearity 60hz VS Correction 50Hz VS Correction 60HZ V BLK Start / Stop V CENTERING OSD vertical position 50HZ OSD vertical position 60HZ KEY 3 CONTRAST MAX. CONTRAST MIN. BRIGHT MAX.(difference from center) BRIGHT MIN.(difference from center) COLOR MAX.(difference from center) COLOR MIN. TINT MAX.(difference from center) TINT MIN.(difference from center) KEY 4 BRIGHT CENTER COLOR CENTER NTSC COLOR CENTER SECAM COLOR CENTER PAL(shift data from COLC) SUB COLOR ( Cr input (#21) gain up) SUB CONTRAST CONTRAST CENTER TINT CENTER KEY 5 SHARP CENTER 3.58NTSC TV SHARP CENTER 3.58NTSC VIDEO SHARP CENTER OTHER TV SHARP CENTER OTHER VIDEO SHARP CENTER DVD ASYMMETRY-SHARPNESS SHARP MAX.(difference from center)

Initial

SHPN GROUP 6 OPT

SHARP MIN.(difference from center) KEY 6 OPTION DATA 0 D mode key 0: No use 1 :use 1 0:normal 1: mute sound when no sync in TV 2 0:NORMAL 1: mute video during change channle 3 au gain 0:50khz 1: 25khz 4 when no sync 1: AFT 0: no AFT 5 AV change 1: mute 0: no mute sound 6 Korea PAL50 BLINK function 1:enable 0:disable 7 standby state 0: high standby 1: low standby 0 OVER MOD 1 N Buzz Cancel 2 3 SLO f0 shift 4 hotel mode TV mode enter 5 hotel mode av mode enter 6 hotel mode 7 vco readjust when position select 0:enable 1:disable

FLG0

FLG1 0 1: 7 key 0: 6 key 1 Secam 0:disable 1:enable 2 LOGO 0:disable 1:enable 3 TINT por 4 PIF SELECT 01:45.75 MHZ 5 011 :38.9MHZ 6 100 :38MHZ 7 APC 1:AUTO 0:PRESET STBY 0 1 hd kill timer set *40us 2 3 4 when STBY.5=0 ,after AC on 0: standby 1: power on 5 after AC power on, 0: ref STBY.4 1: last state 6 auto sleep function 7 MODE0 0 NICAM 0:DISABLE 1:ENABLE 1 English language select 2 Russia language select 3 vietnam language select 4 mute type 0: y mute 1: RGB mute 5 when mode0.7 = 1 ; preset sound system after ASM 6 00: BG 01 :I 10:DK 11: M 7 preset sound system after ASM 0:disable 1:enable MODE1 0 BG system enable 1 I system enable 2 DK system enable

MUTT STAT GROUP 7 RF AGC SBY SRY BRTS TXCX RGCN SECD GROUP 9 V25 V50 V100 GROUP 10 SVM PYNX PYNN PYXS PYNS

3 M system enable 4 VIDEO2 enable 5 video3 enable 6 YUV enable 7 Thailand Dual language 0:Disable 1:Enable standby -->wake time contrast up timer afer standy off KEY 7 RF AGC SECAM B-Y BLACK ADJUST SECAM R-Y BLACK ADJUST SUB BRIGHT shift data of BRTC TEXT RGB CONTRAST MAX. TEXT RGB CONTRAST MIN. SECAM MODE KEY 8 VOLUME 25 VOLUME 50 VOLUME 100 KEY 9 SVM Normal H.SYNC max Normal H.SYNC min Search H.SYNC max Search H.SYNC min

GROUP 11 KEY CALENDAR CLTO TV mode & SOUND SYS != M CLTM TV mode & SOUND SYS = M CLVO VIDEO CLVD YUV MODE CLTO CLTM CLVO CLVD bit setting 7 KILLER OFF 6 P/N ID 5 C GAMMA 4 NTSC-MATRIX 3 2 1 Y DL 0 ABL ABL SETUP 5 TB1254N RGB ABL 4 TB1254N WPS 3 2 ABLpoint setup 1 0 VIDEO DATA SETUP

DCBS

DEF

0~3 Y GAMMA BLACK STRETCH 4~5 OSD LEVEL V AGC SELECT 0 V AGC reference, 0:depends on YC Vcc 1:Depends on integrated regulator KEY NOTE-BOOK OSD Horizontal Position(volume bar, Picture bar,Half blue panel OSD) OSD PLL DATA(volume bar, Picture bar,Half blue panel OSD) OSD Horizontal Position except OSD1 items OSD PLL DATA except OSDF1 items

GROUP 14 OSD1 OSDF1 OSD2 OSDF2 HAFC

NOIS

UCOM

0 when nois.2 = 1 ; TV hafc gain 1 if nois.2 = 0 TV hafc gain depend on noise(0~1) 2 in video mode hafc gain 3 HAFC DATA 0 noise det 1 2 fix the hafc gain MCU DATA

*Reset EEPROM Data: Press D-mode and Press 0752.

46

Service Manual

TCL OVERSEAS HOLDINGS LIMITED

PART VI.
Flow chart

Troubleshooting

No PIC, No raster No Sound, Fuse Blown

Is L804 (+B) shorted to earth?

NO

Is the drain of Q801 shorted to earth? Yes

Check Q801

NO

Is DB801 OK?

NO

Replace DB801

Yes Check the load of +B, such as the collector of Q402

Yes

Check IC801 and its peripheral components

Fig.1 No picture, no raster, no sound, Fuse Blown

No PIC , No r ast er No sou nd, ab norma l +B voltage

Is the +B resistance to earth ok?

Yes

Is the working voltage of Q831 ok?

Yes

Check IC802, Q832 and their peripheral components

NO

NO
Check VR830 and the bias circuit of Q831

Check the load of +B

Fig.2 No picture, no raster, no sound, abnormal +B voltage

TCL OVERSEAS HOLDINGS LIMITED

Service Manual47

No PIC, No raster No sound, +B OK

Is the H-out waveform at Pin13 of IC201 OK?

NO

YES

Check the waveform and static working point of Q401

NG

OK

Check Q402 and FBT

Is the voltage of pin25 of IC201 5V?

NO

YES
Replace IC201

Replace Q401 and R402

Is the resistance to earth of pin25 of IC201 OK?

NO

YES

Can IC401 output a voltage of 9V?

YES

Check R233, C231 and C233

NO

Replace IC201

Check IC401 and its peripheral circuits

Fig.3 No picture, no raster, no sound, B+ OK

48

Service Manual

TCL OVERSEAS HOLDINGS LIMITED

Sound OK, Raster OK, No PIC

Check the RGB waveform at the point of pin4, pin 5, pin6 of P201
NG

OK

Check Q501, Q502, Q503 and their peripheral components

Check the waveform at pin26 of IC201

OK

Check the H sync waveform at pin62 of IC201

OK

Check IC201 and its peripheral components

NG

NG

Check Q208, Q209 and their peripheral components

OK

Check the waveform at pin30 of IC201

Check the waveform at pin45 of IC201

NG

NG

OK

Replace IC201

Check Q202, Q203, Q210 and their peripheral components

Fig.4 No picture, raster OK, sound OK

TCL OVERSEAS HOLDINGS LIMITED

Service Manual49

No raster,No PIC,Sound OK

Check the heater voltage. Is it 6.3V?

Yes
Check the horizontal section circuit.
No

No

Check the voltage of pin10 of the FBT

OK

NG

Replace the FBT

Is the horizontal circuit OK?

Yes

NG

Check R407

Replace R407

OK

Check the video amplying section

NG

Check the R/G/B cathode voltage.

Replace the CPT

OK

Check the screen voltage.

NG

Re-adjust the screen knob on the FBT

OK

Replace the CPT

Fig.5 No raster, no picture, sound OK

50

Service Manual

TCL OVERSEAS HOLDINGS LIMITED

Pic OK, No Sound

Check the Vcc voltage at pin4 of IC601

OK

NG

Check the peripheral supply circuits of pin4 of IC601

Check the vol control voltage at pin1 of IC601

OK
Check the speakers and the leads connected with them
OK

NG

Check the waveform at pin59 of IC201

OK

NG

Replace IC201

Check the waveforms between pin8&10 and pin11&13 of IC601

NG

Check the peripheral components of pin1 of IC601

Check the input signal waveforms at pin3&5 of IC601

OK

NG

Check IC603, Q606,Q607

OK

Check the waveform od pin38 of IC201

OK

NG

Replace IC201

Replace IC601

Check Q609 and its peripheral components

Fig.6 Picture OK, no sound

TCL OVERSEAS HOLDINGS LIMITED

Tuning control not work

Service Manual51

Is the voltage of BM terminal of the tuner 5V?

Yes

Can the VT voltage vary from 0 to 30V while tuning?

No

Yes

Check the tuner, Q101, IC201 and IF section circuit.

No

Check the 9V power supply circuit for the tuner

Check the circuit from pin60 of IC201 to VT terminal of the tuner

Fig.7 Tuning control not work

The channels cannot be stored

Check the H sync impulse waveform at pin62 of IC201

NG

Check waveform at pin45 of IC201 with video signal input

OK

Check Q202, Q203 and their peripheral components

OK

Check the IF and AFT section of IC201 and its peripheral circuits

OK

NG

NG
Replace the fail components

Check IC001 and IC201

Check IC201

Fig.8 The channel can not be stored

52

Service Manual

TCL OVERSEAS HOLDINGS LIMITED

No Color

Check the color system setting

NG

OK

Does the TV signal too weak?

Yes

NO

Check the waveform at pin6&7 of IC201

OK

NG

Check X001,C021,C022

Re-setting

Check the antenna

Check the peripheral components of pin47 of IC201

Fig.9 No color

The channel cannot be switched

Check the voltages of pin4 & pin5 of the tuner

NG

Check the voltage of pin1 & pin61 of IC201

OK

Check the peripheral components of pin 1 & pin61 of IC201

OK

NG

Replace the tuner

Replace IC201

Fig.10 The channel can not be switched

TCL OVERSEAS HOLDINGS LIMITED

Service Manual53

One

Horizontal Line

Check the deflect yoke junction terminal

NG

Correct

it

OK NG

Check the 24V voltage at pin2 of IC301

Check the 24V power supply circuit

OK
Check the V sawtooth waveform at pin1 of IC301

NG

Check IC201 and the peripheral circuit of pin16 of IC201

OK

Check IC301and its peripheral components

Fig.11 One horizontal line

54

Service Manual

TCL OVERSEAS HOLDINGS LIMITED

No PIC, No Sound, Noise dots

Check the AGC voltage of the tuner

OK

Check the VT voltage of the tuner

OK

Check the voltages of band select terminals of the tuner

OK

Check the 5V power supply terminal of the tuner

NG

NG

NG
Check band select section circuit

NG

Check the AGC section circuit

Check the VT section circuit

Check 5V power supply circuit

Check Q101 and its peripheral components

OK

Check the tuner

NG

Replace the tuner

Fig.12 No picture, no sound, snow dots

TCL OVERSEAS HOLDINGS LIMITED

Examples

Service Manual55

1. The indicator is always light. Cannot turn it on by remote handset or local key. Analysis: We can draw a conclusion that the MCU section is not working. So the remote / local key cannot wake up the machine. Perhaps the reset circuit of MCU or the crystal oscillator causes the failure. Having checked the circuit, we find that all components of the reset section of MCU are OK. So we have a suspicion that the crystal oscillator is failure. We replace it with a new crystal oscillator, so the machine can work normally. 2. No sound, no picture blue screen in TV status The blue screen indicates that the video output and scanning circuit and MPU are all ok. The failure may exit in the section from the tuner to pin26 of TMPA8803CSN. We use an oscilloscope to observe the waveform of pin30, and the waveform is ok, but no signal input from the pin26. We check the circuit carefully and we find the emitter of Q209 is cold joint. So the TV signal cannot pass the Q209. That is the failure. 3. Power is switched on, and makes noises. No sound, no picture. First, we disconnect the power supply circuit in the position of +B and switch the machine on. We use a multi meter to measure of +B terminal. The voltage of +B terminal is OK. While connect the +B power supply, we measure the +B again, and we found the voltage is 0V. There must be something wrong with the horizontal power supply circuit, which is supplied by the +B voltage. Having checked the horizontal output triode, we find that there is a short between the collector and the emitter of Q402. The defective horizontal output triode is replaced and the machine is OK. 4. The horizontal output triode is too hot. The low or heavy drive current can cause this phenomenon. The resolution of right area of the raster is low. So we make a suspicion that the low drive current for horizontal output triode make the current linearity worse. We check the horizontal drive section. The power supply for it is OK. Two 1.5W resisters in parallel compose R402. One of the twos is cold soldering, and the resistance of R402 is changed from 2.4K to 4.8K. The voltage that is added to T401 drop down, and therefore the driver current is weak. The work temperature of horizontal output triode is rising. Having re-soldering R402, the temperature of horizontal output triode is OK. 5. Sound Ok, no picture (Black Screen) The standby and working status can be changed freely. But the screen is black. Menu or picture is invisible. The heater is lighting, so the horizontal scanning circuit is ok. Retrace lines are visible if we adjust the screen voltage. All these above indicate that RGB level is cut off, and this is a kind of protection method of Toshiba chassis for the CRT. If there is something wrong, which make TMPA8803 not receive the FBP impulse through pin12, with the scanning section. TMPA8803 will change the RGB output to black level via the I2C bus automatically. At the same time, TMPA8803CSN will make the beam current smallest to prevent the screen of the CRT not be hurt by the electron beam. We check the circuit according to the clew above and find that D404 is breakdown, so the FBP

56

Service Manual

TCL OVERSEAS HOLDINGS LIMITED

impulses disappear and screen is black. 6. Screen is white with visible retrace lines Generally, this kind of failure may occur at the section of the end video amplifying. The cathode current cannot be cut off during the traceback time because the three cathodes current is too large and the three cathodes voltage is too low. Only the failure of bias circuit can make the three cathodes not be cut off at the same time because the fail probability of the three video amplifying circuits is very small. We find that there is a short at the collector of Q510. This matter makes the emitters of Q501/502/503 on the lower voltage. The retrace lines appear on the screen for the lower cathode voltage. We replace Q510 with good one and all is ok. 7. One vertical line on the screen The failure means that there is something wrong with the horizontal deflecting circuit and the horizontal scanning has stopped. For the traceback impulses from the primary coil of the FBT still exist, the heater voltage and EHT voltage affect the display of vertical line in the screen. We check the horizontal deflecting section, and we find that R411 has been breakdown, and the terminal pad of L412 has been damaged by high temperature. The L412 is heavier than the other small components, and it is supported by two legs. So the legs are easy to loose to cause the cold soldering. And the deflecting current all pass R411, and R411 is blew. 8. No AV signal input First, we we checked the AV input circuit but not find anything abnormal. So we exchange TV input channel and AV input channel. The AV signal can be displayed normally. So there is something wrong with the inner circuit of Pin24 of IC201. Having replaced TMPA8803CSN, all is OK. 9. Fuse blew once switch the set on If the failure happen, first we should check the rectifier circuit and the switch power circuit to find whether there are some short components. Second, we should check whether there are shorts at the horizontal output section. While we did with this failure, we found a short at the load section of +B power supply. We checked the horizontal output triode. In addition a short happened between the collector and the emitter, there was an open inside the retrace cap C406. We can draw a conclusion that the open make the retrace time less, so the amplitude of retrace impulse increased, and broke the horizontal output triode down. 10. Some channel cannot be searched out This is a defect of tuning function not the failure of MCU or the tuner. Perhaps, the input channel signal cannot reach the MCU. Besides the AFA/AFB circuits intergrated inside the TMPA8803, M117 includes a horizontal sync separation circuit, which is composed by Q202 and Q203. This circuit can separate the horizontal sync signal from the composite signal which is output from pin45 of TMPA8803. And the H sync signal input to MCU from pin62. This is a mark for MCU to judge whether the set has received a channel. 11. No PIC, no sound, no raster, remote and local key unavailable First we should check the power section. As this example, the switch power supply circuit can work

TCL OVERSEAS HOLDINGS LIMITED

Service Manual57

normally, and can output a main power of 112V. We checked the second voltage regulation section, and we found that the H-Vcc ( 9V ) was about 4.5V only. As the 18V power supply was OK, we suppose that there should be a short in the load section. We found a short at pin17 of IC201. Q207 and Q206 were not damaged. C030 was broken down. Once we havd replaced C030 and IC201, H-Vcc was OK. Because C030 as short, the base voltage of Q206 became higer. And the voltage of H-Vcc became higher also. So IC201 was damaged.

M28B Block Diagram

By ZSM

2002/9/10

220V~

D801D804

Q801~ Q804 AMP.

T803 Transformer

112v 12V 12V

R/G/B

Q501 Q503 Q505 AMP.

R/G/B

CRT

Tuner TU101

IF AMP Q101

SAW Z101

TMPA8821

V.out

V. AMP. IC301

IC201

EHT FOCUS SCREEN

H.out CPU IC001

IC603

H.drive AMP. Q401 Q402

FBT T402

Audio AMP.

220V,24V 6.3V

E2PROM IC002

KEY

IR001 Sensor AV Vin AV Vout AV Ain

TV/AV SW

IC601

Speaker

AV Aout