1-3

EJC 65
TECHNICAL SPECIFICATION

UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG)

Revision Date: 4/4/01 Sandvik-Tamrock reserves the right to change this specification without notice
S ub je ct t o
Co nd ition s

Tamrock Loaders Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940 Fax: (905) 639-0876

1-4

EJC 65

Main Dimensions

65

Revision Date: 4/4/01 Sandvik-Tamrock reserves the right to change this specification without notice
S ub je ct t o
Co nd ition s

Tamrock Loaders Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940 Fax: (905) 639-0876

EJC 65

1-5

Specification Sheet
SANDVIK TAMROCK EJC Loaders Division EJC 65 January 1, 2000 STANDARD UNIT Deutz F5L-912W diesel engine, 68 hp (51kW) Donaldson dry type air intake ECS catalytic exhaust purifier Rexroth hydrostatic transmission Clark gear drive transfer case Dynamic service braking through hydrostatic transmission Clark axles 9.00 X 20-18 ply L5R tube type tires 1.5yd3 (1.2m3) bucket with 500 BHN lip Electro/mechanical two lever bucket control Electro/mechanical single lever steer control Electric gauges 24-volt DC electrical system Central manual lube SAE type hose fittings Four (4) English parts manuals 4 operator and 4 service manuals

A1 = no impact on delivery time; A2 = delivery time on request OPTIONAL EQUIPMENT A1 A2 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 * Fume diluter exhaust with purifier * Ejector bucket 1.25yd3 (1.0m3) 56" (1422mm) wide * Rock Bucket 1.7 yd3 (1.3m3) 56" (1422mm) wide Altitude compensation kit for Deutz F5L-912W engine ______ft(meters) ____Temperature SAE, ROPS/FOPS canopy MSHA FOPS canopy Fire suppression system, Ansul 4 nozzle Auto. fire suppression system, Ansul 4 nozzle (Checkfire II) Hand held fire extinguisher 10 lb Radio remote control (with receiver cover/cable and interface), Tamrock proportional Radio remote control interface Radio remote control fire suppression (Requires RRC and fire suppression system) Back-up alarm, audible Spare rim & tire, standard Spare rim Additional spare parts manuals Additional workshop manuals

(*) Replaces the standard equipment

Revision Date: 4/4/01 Sandvik-Tamrock reserves the right to change this specification without notice
S ub je ct t o
Co nd ition s

Tamrock Loaders Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940 Fax: (905) 639-0876

1-6

EJC 65

Standard Unit Specifications

Standard tires
Tire size Type Air pressure, front Air pressure, rear 9.00 X 20, 18 PLY Michelin XMD2 tube type tires 517 kPa (5.17 bar) (75 psi) 517 kPa (5.17 bar) (75 psi)

Weights
Operating weight 6 759 kg (14 900 lb.) Total loaded weight 9 706 kg (21 400 lb.) Axle weights without load front axle 2 327 kg (5 130 lb.) rear axle 4 432 kg (9 770 lb.) Axle weights with load front axle 6 813 kg (15 021 lb.) rear axle 2 893 kg (6 379 lb.)

Steering hydraulics
Closed centre, fixed displacement gear. One double acting steer cylinder equipped with electro./mechanical control lever. Turning radius (with std bucket): Right inner 1905 mm (75 ") outer 3734 mm (147 ") Turning angle 40o Main components in steering system: Hydraulic pump Gear Control valve Electro. / mechanical Steering cylinders EJC 3.5" bore x 1.75" rod (89 mm x 44 mm) Pressure settings: Main relief 15.2 MPa (152 bar) (2 200 psi) Port relief valves 17.2 MPa (172 bar) (2 500 psi)

Capacities
Tramming capacity Breakout force, lift Breakout force, tilt Tipping load Buckets 2 948 kg (6 500 lb.) 37 kN (3 791 kg) (8 340 lbf) 46 kN (4 750 kg) (10 450 lbf) 6 468 kg (14 230 lb.) 0.96 - 1.3 m (1.25 - 1.73 yd.) 6.5 sec. 4.3 sec. 3.0 sec.

Bucket motion times

Bucket hydraulics
Full hydraulic open-centre system with one gear pump. Equipped with electro./mechanical control lever, two lift cylinders and one dump cylinder. Main components: Lift cylinders EJC 4.0" bore x 2.0" rod (102 mm x 51 mm) Dump Cylinder EJC 6.5" bore x 3.5" rod(165 mm x 89 mm) Hydraulic pump Gear Control valve Electro. / mechanical Pressure Settings: Main relief 15.2 MPa (152 bar) (2200 psi) Bucket dump 5.5 MPa (55 bar) (800psi) Bucket roll back 17.2 MPa (172 bar) (2500 psi) Raise/lower arms 17.2 MPa (172 bar) (2500 psi) Hyd. oil tank cap. Appro. 114 l (28 gal)

Driving speeds forward and reverse

Frame
Frames Material Central hinge Welded steel box construction G40.21 - 50WT-CAT#3 Welded steel box construction with hardened steel spherical bearings Material G40.21 - 50WT-CAT#3 Lift arms Solid plate construction Material G40.21 - 50WT-CAT#3 Tanks are welded to frame.

Standard engine
Diesel engine Output Torque Number of cylinders Displacement Cooling system Combustion principle Air filtration Electric system Exhaust purification Deutz F5L-912W 51 kW (68 Hp) @ 2300 rpm 229 Nm (169 lbf-ft) @ 1550 rpm In line, 5 4.7 l (287 in) Air cooled Swirl chamber, four stroke Donaldson, dry type 24 V ECS catalytic purifier Gear drive 2.39:1 Hydrostatic transmission with forward and reverse

Standard brakes
Dynamic service braking through the hydrostatic transmission. The parking brake is a spring applied, hydraulically released dry disc brake mounted on the front axle pinion. Main components in the parking brake system: Pressure accumulator Piston type with charge valve

Electrical equipment
Alternator Batteries Starter Driving and working lights 3 Spare parts manuals 3 Operators manual 3 Service manual 1 Spare parts manual 1 Operators manual 1 Service manual 24 V 35 A min. 2 x 12 V, 950 CCA 24 V Heavy Duty 2 front, 2 rear English English English English English English

Transfer case
Clark

Transmission
Rexroth AA4V56

Standard manuals (customer)

Standard axles
Front axle Clark 12D0840, conventional differential, fixed. Rear axle Clark 12D0840, no-spin differential, fixed. Centre articulation/oscillation 16o

Standard manuals (market area)

Revision Date: 4/4/01 Sandvik-Tamrock reserves the right to change this specification without notice
S ub je ct t o
Co nd ition s

Tamrock Loaders Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940 Fax: (905) 639-0876

EJC 65

EJC 65 (Imperial Units)

12

ENGINE:

TRANS:

Rolling Resistance % 0 EMPTY 2 4 6 8 0 LOADED 2 4 6 8

PAYLOAD: 6 500 lbs

11

10

6
40%

GRADE %

Speeds on Grade

S ub je ct t o

Co nd ition s

Tractive Effort (klbf)

Revision Date: 4/4/01 Sandvik-Tamrock reserves the right to change this specification without notice
40% 30% 30% 20% 15% 20% 15% 10% 10%

0 2 3 4 5 6 7 8 Speed (mph) 9 10 11 12 13 14 15 16

1-7

Tamrock Loaders Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940 Fax: (905) 639-0876

1-8

EJC 65 (Metric Units)

50

ENGINE:

Rolling Resistance %

TRANS:

45

EMPTY 0 2 4 6 8

LOADED 0 2 4 6 8

40

30

GRADE %

S ub je ct t o

Co nd ition s

Tractive Effort (kN)

Revision Date: 4/4/01 Sandvik-Tamrock reserves the right to change this specification without notice
40% 30% 40% 30% 20% 20% 15% 15% 10% 10%

35

25

20

15

10

0 3 4 5 6 7 8 9 10 11 12 Speed (km/h) 13 14 15 16 17 18 19 20 21 22 23

EJC 65 - Speeds on Grade

Tamrock Loaders Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940 Fax: (905) 639-0876