Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
136 views

CSC153 Syllabus of Microprocessor

This course covers fundamental concepts of microprocessor architecture, programming, and interfacing through study of the Intel 8085, 8086, and 8088 microprocessors, including instruction sets, addressing modes, I/O, memory access, interrupts, and programming in assembly language with a focus on practical applications. Key topics include basic computer organization, the fetch-execute cycle, DMA controllers, parallel and serial communication interfaces, and keyboard/display operation. The goal is to introduce students to microprocessor operation, programming, and applications.

Uploaded by

Prajowal Manandhar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
136 views

CSC153 Syllabus of Microprocessor

This course covers fundamental concepts of microprocessor architecture, programming, and interfacing through study of the Intel 8085, 8086, and 8088 microprocessors, including instruction sets, addressing modes, I/O, memory access, interrupts, and programming in assembly language with a focus on practical applications. Key topics include basic computer organization, the fetch-execute cycle, DMA controllers, parallel and serial communication interfaces, and keyboard/display operation. The goal is to introduce students to microprocessor operation, programming, and applications.

Uploaded by

Prajowal Manandhar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Course Title: Microprocessor Course no: CSC-153 Full Marks: 60+20+20 Credit hours: 3 Pass Marks: 24+8+8 Nature

of course: Theory (3 Hrs.) + Lab(3 Hrs.) Course Synopsis: This course contains of fundamental concepts of computer organization, basic 110 interfaces and Interrupt operations. Goal: the course objective is to introduce the operation, programming and application of microprocessor

Unit 1: Introduction (3 hrs)


Definition of microprocessor and its application Evolution of microprocessor Von Neumann architecture Basic organization of microprocessor o Microprocessor: Arithmetic and logic unit (ALU), Control unit (CU), Registers o Memory o Input/Output o System bus: Data, Address and Control bus

Unit 2: Basic Computer Architecture (10 hrs)


Sap-I architecture: Block diagram, and function of each block o 8-bit W bus o 4-bit program counter o 4-bit memory address register (MAR) o i6x8 bit memory o 8-bit instruction register (IR) o 8-bit accumulator o 8-bit B register o 8-bit adder-subtracter o 8-bit output register SAP-I instructions 1 hr o LDA, ADD, SUB, OUT, HLT Fetch and execution cycle of SAP-I instructions 2 hrs o Fetch cycle: Address state, increment state, Memory state o Execution cycle of LDA, ADD instructions Microprogram 1 hr o Micro instructions of SAP-1 instructions SAP-2 architecture: Block diagram and functions of each block Architectural differences with SAP-I 0.5 hr o Bidirectional registers o Flags Instruction sets 1 .5 hrs 2 hrs

2 hrs

Unit 3: Instruction Cycle (3hrs)


Instruction cycle, machine cycle and T states 1 hr o Machine cycle of 8085 microprocessor: Op-code fetch, Memory read, memory write, I/O read, I/O write, Interrupt Fetch and execute operation, timing diagram 1.5 hrs o Timing diagram of MOV, MVI, IN, OUT, LDA, STA Fetch and execute overlap 0.5hr

Unit 4: Intel 8085/8086/8088 (8 hrs)


Intel 8085 microprocessor 4.5 hrs o Functional block diagram o Pin configuration o Description of each blocks: Registers, Flag, Data and address bus, Timing and control unit, Interrupts o Instructions- opcode and operands o Addressing modes o Instructions and data flow Intel 8086/8088 microprocessor 3.5 hrs o Functional block diagram of 8086 microprocessor and description of each block: Registers, Flags, Address and Data bus o Introduction to 8088 microprocessor and its block diagram o Comparison with 8085 microprocessor o Assembly instructions- mnemonic and operands o Addressing modes

Unit 5: Assembly Language Programming (9 hrs)


Programming with Intel 8085 microprocessor 4.5 hrs o Instruction format o Instruction types: Data transfer, Arithmetic, Logic, Branching, Miscellaneous o Simple sequence programs, Branching, Looping Programming with Intel 8086 microprocessor 4.5 hrs o Assembly instruction format o Mnemonics and Operands o Macro assembler o Assembling and linking o Assembler directives, comments o Instruction sets Data transfer:- MOV, IN, OUT, LEA Arithmetic and logic:- ADD, SUB, INC, DEC, MUL, DIV, AND, OR, XOR, NOT, CMP, DAA, AAA, ROR, RCR, ROL, RCL, SHL, SHR Branching:- JMP, CALL, RET, LOOP Stack: PUSH, POP o INT 2Ih functions O1H, 02H, 09H, OAH, 4CH o INT 10h functions OOH, O1H, 02H, 06H, 07H, 08H, 09H, OAH o Simple sequence programs, Branching, Looping

o Debugging 2

Unit 6: Basic I/O, Memory R/W and Interrupt Operations (6 hrs)


Memory read/write, Input/output read/write operation in 8085 microprocessor based system 1 hr Direct memory access (DMA) 1.5 hrs o Introduction, advantage and application o DMA controller 8237 interfacing Interrupt 1 .5 hrs o 8085 interrupt pins and interrupt priority o Maskable and non-maskable interrupts o Vector and polled 8259 operation 2 hrs o Block diagram and explanation o Priority modes and other features

Unit 7: Input/output Interfaces (6 hrs)


Parallel communication introduction and applications 0.5 hr Serial communication 1.5 hrs o Introduction and applications o Introduction to Programmable Communication Interface 8251 o Basic concept of synchronous and asynchronous modes Simple I/O, strobe I/O, Single handshake I/O, double handshake 1/0 0.5 hr 8255A and its working 1 .5 hrs o Block diagram o Modes of operation o Control word RS-232: Introduction, pin configuration (9 pin and 25 pin) and function of each pin. Interconnection between DTE-DTE and DTE-DCE 1 hr Keyboard and display controller: Introduction to 8279 1 hr
-

References:
Ramesh S. Gaonkar, Microprocessor Architecture, Programming, and Applications with 8085, Prentice Hall (For unit 1, 3, 4, 5, 6 and 7) 2. A. P. Malvino and J. A. Brown, Digital Computer Electronics, Tata McGraw Hill (For unit 2) 3. D. V. Hall, Microprocessors and Interfacing Programming and Hardware, McGraw Hill (For unit 4, 5, 6 and 7) 4. Peter Abel, IBM PC Assembly Language Programming, McGraw Hill (For unit 4 and 5)

You might also like