Casement Windows

400 SERIES 2 00 SERIES ARCHITECTURAL
2011-12 PRODUCT GUIDE

FOR PROFESSIONALS
SECTION REFERENCE
Styles & Size Ranges.................. 178 Window Details .................. 179180 Performance Data ...................... 269
Architectural Casement Windows
ARCHITECTURAL CASEMENT WINDOWS Features

FRAME
H
GLASS
HARDWARE
A Heavy-duty extruded
aluminum cladding protects the frame exterior, providing lowmaintenance durability. Standard cladding nish meets AAMA 2604. An optional nish that meets the AAMA 2605 G C standard is also available.
B members are treated with a water-repellent wood preservative for long-lasting* protection and performance.
H High-Performance
options include:
E
Low-E4 glass
glass
B Wood frame
Low-E4 SmartSun glass Low-E4 Sun glass
SASH
C Interior stops are unnished.

Low-maintenance prenished white interiors are also available. Installation ange extends 1 1/2" around the perimeter of the unit for positioning and locating. Installation clips are standard for increased structural anchoring to building members. Mounted around the frame perimeter, the clips rotate into position and can be bent into place against the framing members to suit all jamb conditions.
D Wood core members provide

excellent structural stability and energy efciency.
Tempered glass and other glass options are available. Contact your Andersen supplier. (Glass option must be specied.)
PATTERNED GLASS
Patterned glass options are available. See page 12 for more details.
E Heavy-duty extruded
aluminum cladding protects the sash exterior, providing lowmaintenance durability.
F Weatherstripping
throughout the unit provides long-lasting,* energy-efcient seal. Rain skirt is factory installed on the perimeter of the sash.
Smooth Control Hardware System The Smooth Control hardware system employs a worm gear drive for easy operation. The split-arm operator moves the sash away from the frame to provide for easier glass cleaning on rectangular units. Archtop and Springline units use the same Smooth Control hardware system with stainless steel butt hinges for smooth operation. (Hardware option and nish must be specied.)
French Casement Andersen architectural French casements offer smooth operating multi-point locking mechanisms and hinges. This allows both sash to swing outward from the center, eliminating a center mullion post. The multi-point lock is activated with a single turn of a handle and simultaneously secures both sash. French casement windows have a unique locking handle. French casement hardware is available in all nishes except distressed bronze and distressed nickel.
G Silicone glazing bead

combined with two-sided silicone tape provides superior weathertightness.
* For complete information on our limited warranties, visit andersenwindows.com or contact your Andersen supplier. ** Actual wood is Sapele, also known as African mahogany, a non-endangered hardwood with color and characteristics similar to American mahoganies.
Exterior
White Sandtone
Specify a unit exterior option and an interior option to complete your order.
Interior
Birch Bark Dove Gray Slate Blue Spruce pine oak
Other species also available.
Terratone
Forest Green Prairie Grass Dark Chestnut Black
maple
alder
cherry
Custom colors available.
Terra Cotta
Cocoa Bean Dark Ivy
Canvas
River Rock
Driftwood
Coral Green
Red Rock
Dark Bronze Midnight Blue
douglas fir
mahogany**
white
birch bark
primed white
Hardware
Sold Separately.
Grilles are available to match the windows interior and exterior. Naturally occurring variations in grain, color and texture make each wood casement window one-of-a-kind.
Estate Hardware
Folding Hardware
Folding handles avoid interference with window treatments.
Classic Series Hardware
Available in bright brass, antique brass, polished chrome, brushed chrome, satin nickel, oil rubbed bronze, distressed nickel and distressed bronze.
Contemporary
Available in bright brass, satin nickel, oil rubbed bronze, white, stone, gold dust or black nish.
Traditional
Available in bright brass, antique brass, satin nickel, oil rubbed bronze, distressed bronze, white, stone, gold dust or black nish. Available in white or stone nish. Bold names denote nish shown.
Hardware Finishes
bright brass antique brass polished chrome brushed chrome satin nickel oil rubbed bronze distressed nickel distressed bronze white stone gold dust black
176
Printing limitations prevent exact nish replication. See your Andersen supplier for actual nish samples.
Sold Separately.
FRAME
SPECIAL USE OPERATORS
INSECT SCREENS
Single-Actuation Casement Lock A single-actuation lock releases the casement sash easily while the reach-out action eliminates binding when closing. The handle is offered in nishes that coordinate with your specied hardware option.
Compact Operator Handle Specially designed for use in situations where blinds or other window treatments interfere with standard operator handle. Available in white or stone nish.
EXCLUSIVE
TruScene Insect Screen TruScene insect screens are made with a micro-ne stainless steel mesh thats one-third the diameter of our aluminum screen wire. They provide over 50% more clarity than our conventional insect screens. They also let more sunlight and fresh air into the home. For casement and awning windows, they are available with stone- or white-colored frames. Conventional Insect Screen Conventional insect screens have charcoal powder-coated aluminum screen cloth. Frames are available in white and stone.
PREFINISHED INTERIOR
Andersen architectural casement windows are available with prenished white interior frame, sash and stops.
Extension Jambs Architectural casement jamb depth is 3 3/8". Extension jambs are available for the following wall thicknesses:
4 9/16" 5 1/4" 6 9/16" 7 1/8"
Architectural casement windows are available with Stormwatch protection. Contact your Andersen supplier.
All sizes are available unnished or with white, birch bark or primed nishes. All extension jambs are available for jobsite application or can be factory applied.
Easy-Grip Handle Larger knob makes it easier to grip and operate. Available in white or stone nish. Andersen Classic Series design only.
HARDWARE
Metal T-Handle Our smallest operator, the metal T-handle, may make it more difcult for young children (5 and under) to open the window.
For more information on child safety, write: Andersen Corporation LookOut for Kids Program 100 Fourth Avenue North Bayport, MN 55003 Call 1-800-313-8889 or email us at: lofk@andersencorp.com
Corrosion-Resistant Components* Corrosion-resistant hinge and operator arm hardware kits are made with high-quality stainless steel. They are designed for harsh and corrosive environment applications such as heavy industrial or coastal areas.
For more information about glass, patterned glass, grilles, TruScene insect screen and installation accessories, see pages 1232 or visit
Operator Spline Cover An operator spline cover is an attractive cap that covers the roto operator stud when the handle has been removed to control access or operation of the window. Operator spline cover should not be used on any window designated or intended for emergency escape or rescue. Please consult your local building code ofcial for local egress code requirements.
* For complete information on our limited warranties, visit andersenwindows.com or contact your Andersen supplier. CAUTION: Creosote-based stains should not come in contact with Andersen products. Do not paint weatherstripping. Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products.
andersenwindows.com
177
Accessories
ARCHITECTURAL CASEMENT WINDOWS

Style and Size Range
Scale 1 8" = 1'-0" (1:96)
Standard sizes are available to complement Andersen 400 Series products. For complete standard window and minimum rough opening dimensions and opening specifications visit andersenwindows.com or contact your Andersen supplier for details. Custom sized in 1 8" increments between minimum and maximum width and height dimensions.
Rectangle Casement Window

1'-5" to 2'-11 15 16"
Trapezoid Casement Window*

2'-0 1 8" to 2'-11 15 16"
Single Archtop Casement Window*

1'-5" to 2'-11 15 16"
CUSTOM WIDTHS 3'-4 13 16" to 7'-0" CUSTOM HEIGHTS CUSTOM HEIGHTS 7'-0"
CUSTOM WIDTHS 7'-0" CUSTOM HEIGHTS
CUSTOM WIDTHS
to
Unequal Leg Arch Casement Window

1'-5" to 2'-11 15 16"
Twin Archtop Casement Window*

2'-10" to 5'-11 7 8"
Triple Archtop Casement Window*

4'-3" to 8'-11 13 16"
CUSTOM WIDTHS 7' 0" 7'-0" CUSTOM HEIGHTS CUSTOM HEIGHTS
2'-11 15 16"
1'-8 1 2"
to
CUSTOM WIDTHS
to
2'-11 15 16"
to
2' 11 15 16"
Springline Casement Window*

2'-0 1 8" to 2'-11 15 16"
Springline Flanker Casement Window*

1'-8 1 2" to 2'-11 15 16"
2'-11 15 16"
Twin Springline Casement Window*

3'-5" to 5'-11 7 8"
to
CUSTOM WIDTHS 7'-0" CUSTOM HEIGHTS CUSTOM HEIGHTS
CUSTOM WIDTHS
to
7'-0"
3'-4 13 16"
to
Springline French Casement Window*

4'-0" to 4'-8 1 2"
4'-0"
Rectangular French Casement Window

3'-4 3 4" to 4'-8 1 2"
4'-0"
Archtop French Casement Window

4'-0" to 4'-8 1 2"
CUSTOM WIDTHS 5'-11 7 8" CUSTOM HEIGHTS 5'-11 7 8" CUSTOM WIDTHS CUSTOM HEIGHTS 5'-11 7 8" CUSTOM HEIGHTS CUSTOM WIDTHS
to
2'-11 15 16"
4'-11 7 8"
to
* For exterior wall cladding that extends beyond the face of the window, there may be a reduction in the amount of opening "swing" when the curved portion of the sash touches the curved portion of the wall cladding. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33.
178
4'-0"
to
to
Scale 11 2" = 1'-0" (1:8)

1 5 16" (33)
4 9 16" (116) Jamb Width 3 3 8" (86) Arch Casing 3 1 8" (79) 1 1 8" (29) 7 8" (22)
Head - Curved Top
Minimum Rough Opening Height
Extension Jambs Insect Screen
3 1 8" (79)
1 1 8" (29) 4 9 16" (116) Jamb Width
7 8" (22)
1 1 8" (29) 1 1 8" (29) Extension Jambs Head - Lineal Insect Screen
Unit Dimension Height
3 1 8" (79)
1 5 16" (33)
Unobstructed Glass Height
3 3 8" (86)
1 7 16" (37) 1 1 8" (29)
Jamb
1 4"
3 1 8" (79)
(6)
Unobstructed Glass Width Unit Dimension Width
3 1 8" (79)
Jamb
1 4"
Minimum Rough Opening Width
(6) Sill
Horizontal Section
Rectangular or Curved Top
Vertical Section
Clad Casement Springline Window Details

Scale 11 2" = 1'-0" (1:8)
1 5 16" (33) 4 9 16" (116) Jamb Width 3 3 8" (86) Interior Casing
Extension Jambs Insect Screen
3 1 8" (79)
1 1 8" (29) 4 9 16" (116) Jamb Width
7 8" (22)
1 1 8" (29)
7 8"
(22)
Extension Jambs Head Insect Screen
3 1 8" (79)
1 5 16" (33)
3 3 8" (86)
1 7 16" (37) 1 1 8" (29)
Jamb
1 4"
3 1 8" (79)
(6)
3 1 8" (79)
Jamb
1 4"
Minimum Rough Opening Width Horizontal Section
(6) Sill Vertical Section
4 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with window. Dark-colored areas are additional Andersen parts required to complete window assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to unit installation guides at andersenwindows.com.
179
Clad Casement Window Details
ARCHITECTURAL CASEMENT WINDOWS

Clad Casement Fixed Picture and Transom Window Details
Scale 11 2" = 1'-0" (1:8)
4 9 16" (116) Jamb Width 1 5 16" (33) 3 3 8" (86) Curved Casing 3 1 8" (79) 1 1 8" (29) 7 8" (22)
Head - Curved Top Extension Jamb Minimum Rough Opening Height 1 1 8" (29) 4 9 16" (116) Jamb Width
7 8" (22)
Extension Jambs
3 1 8" (79)
1 1 8" (29) 1 1 8" (29)
Unobstructed Glass Height 3 1 8" (79)
3 3 8" (86)
Head - Lineal
1 5 16" (33)
Jamb
1 4"
3 1 8" (79)
(6)
3 1 8" (79)
Jamb
1 4"
1 1 8" (29) 1 1 8" (29)
(6) Sill
Horizontal Section
Vertical Section
4 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with window. Dark-colored areas are additional Andersen parts required to complete window assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
180
SECTION REFERENCE
Styles & Size Ranges.................. 183 Window Details .......................... 184 Performance Data ...................... 269
Architectural Monumental Double-Hung Windows
ARCHITECTURAL MONUMENTAL DOUBLE-HUNG WINDOWS Features

FRAME
G
Accessories
E Weatherstripping throughout the unit provides long-lasting,* energy-efcient seal. F Silicone glazing bead combined with two-sided silicone tape helps provide superior weathertightness.
GLASS
Extension Jambs Standard jamb depth is 4 9/16". Extension jambs are available for the following wall thicknesses: 5 1/4" 6 9/16" 7 1/8" All sizes are available unnished or with white, birch bark or primed nishes. All extension jambs are available for jobsite application or can be factory applied.
Sold Separately.
aluminum cladding protects the frame exterior, providing low-maintenance F durability. D Standard cladding nish E meets AAMA 2604. An optional nish that B meets the AAMA 2605 standard is also available.
B Wood frame members

are treated with a waterrepellent wood preservative for long-lasting* protection and performance. Installation ange extends 1 1/2" around the perimeter of the unit to help properly position the unit in the opening. Installation clips are standard for increased structural anchoring to building members. Mounted around the frame perimeter, the clips rotate into position and can be bent into place against the framing members to suit all jamb conditions.
SASH
G High-Performance
options include:
Low-E4 Low-E4
glass
C Heavy-duty extruded
aluminum cladding protects the sash exterior, providing lowmaintenance durability.
INSECT SCREENS EXCLUSIVE

TruScene Insect Screen TruScene insect screens are made with a micro-ne stainless steel mesh thats one-third the diameter of our aluminum screen wire. They provide over 50% more clarity than our conventional insect screens. They also let more sunlight and fresh air into the home. Conventional Insect Screen Conventional insect screens have powder-coated aluminum screen cloth.
glass Sun glass
Low-E4 SmartSun glass
Insect Screen Frames Choose full insect screen or half insect screen (shown above). Half insect screen congurations allow ventilation without affecting the view through the upper sash. Available in colors to match product exteriors. Casings Curved interior casings are available in the same proles as other Andersen products. Curved exterior aluminum and wood casings are available in matching radii and a variety of proles.
D Wood sash members

are treated with a waterrepellent wood preservative for long-lasting* protection and performance. Radii are made of laminated continuous pine veneers. Lineal components are solid or engineered wood with a pine core.
PATTERNED GLASS
For more information about glass, patterned glass, grilles, TruScene insect screen and installation accessories, see pages 1232 or visit
andersenwindows.com
Exterior
White Sandtone
Interior
Birch Bark Dove Gray Slate Blue Spruce pine oak
Terratone
maple
alder
cherry
Terra Cotta
Cocoa Bean Dark Ivy
Canvas
River Rock
Driftwood
Coral Green Red Rock
douglas fir
mahogany**
white
birch bark
primed white
Hardware
Hardware
Sold Separately.
Grilles are available to match the windows interior and exterior. Naturally occurring variations in grain, color and texture make each wood casement window one-of-a-kind.
Andersen architectural monumental double-hung windows feature unique sash locks and lifts. They are available in bright brass, bronze and white. Custodial locks that allow tilting for cleaning but limit access and prevent unauthorized tilting of the sash are standard. Contact your Andersen supplier for more information.
Sash Locks
Sash Lifts
Printing limitations prevent exact nish replication. See your Andersen supplier for actual nish samples.
Bold names denote nish shown.
Hardware Finishes
182
bright brass bronze white
Style and Size Range

Scale 1 8" = 1'-0" (1:96)
Standard sizes are available to complement Andersen 400 Series and 200 Series products. For complete standard window and minimum rough opening dimensions and opening specifications visit andersenwindows.com or contact your Andersen supplier for details. Custom sized in 1 8" increments between minimum and maximum width and height dimensions.
Single Archtop Single-Hung & Double-Hung Window

2'-1 5 8" to 5'-5 5 8"
Rectangle Single-Hung & Double-Hung Window

2'-9 5 8" to 5'-5 5 8"
Springline Single-Hung Window

2'-1 5 8" to 5'-5 5 8"
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM WIDTHS
10'-4 3 4"
10'-4 3 4"
10'-4 3 4"
CUSTOM HEIGHTS
CUSTOM HEIGHTS
3'-0 3 4"
Unequal Leg Arch Single-Hung & Double-Hung Window

2'-5 5 8" to 5'-5 5 8"
4'-0 3 4"
Springline Flanker Single-Hung Window

2'-5 5 8" to 5'-5 5 8"
CUSTOM WIDTHS
CUSTOM WIDTHS
All windows may be order fixed over fixed.

10'-4 3 4" 10'-4 3 4" CUSTOM HEIGHTS CUSTOM HEIGHTS
Some larger windows may be required to be ordered fixed over fixed. A fixed upper sash is standard when upper sash height is greater than 48".
to
Twin Springline Archtop Single-Hung & Double-Hung Window

4'-3 1 4" to 10'-11 1 4"
3'-4 3 4"
5'-8 3 4"
to
Twin Springline Flanker Single-Hung Window

4'-11 1 4" to 8'-3 1 4"
4'-4 3 4"
CUSTOM WIDTHS
10'-4 3 4"
10'-4 3 4"
CUSTOM HEIGHTS
Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33.
3'-4 3 4"
5'-8 3 4"
CUSTOM HEIGHTS
to
to
CUSTOM HEIGHTS
to
to
to
CUSTOM WIDTHS
183
Architectural Monumental Double-Hung Windows
ARCHITECTURAL MONUMENTAL DOUBLE-HUNG WINDOWS

Monumental Double-Hung Window Details
Scale 11 2" = 1'-0" (1:8)
6 1 8" (156) 1 9 16" (40) 4 9 16" (116) Jamb Width Interior Curved Casing 1 9 16" (40) Full Insect Screen Shown, Half Insect Screen Available Minimum Rough Opening Height 6 1 8" (156) 4 9 16" (116) Jamb Width Full Insect Screen Shown, Half Insect Screen Available Minimum Rough Opening Height 1 9 16" (40) 6 1 8" (156) 4 9 16" (116) Jamb Width Arch Casing
13 16"
(21)
13 16"
(21) (60)
13 16"
(21)
3 13 32" (87) Minimum Rough Opening Height Head
2 11 32"
2 11 32" (60) Archtop Curved Head
Springline Curved Head
1 17 32" (39)
1 17 32" (39)
1 17 32" (39)
Check Rail
Check Rail
Check Rail
4 1 4" (108)
4 1 4" (108)
4 1 4" (108)
Sill Vertical Section Springline Double-Hung Window
Sill Vertical Section Rectangular Double-Hung Window
Sill Vertical Section Archtop Double-Hung Window

1 4"

1 4" 1 4"
Unit Dimension Width

13 16"

13 16"
1 4"
Extension Jambs
(6)
(21)
4 3 16" (106)
(6)
Extension Jambs
(6)
(21)
4 3 16" (106)
(6)
4 9 16" (116) Jamb Width
4 9 16" (116) Jamb Width
6 1 8" (156)
Jamb 2 x 6 Wall Horizontal Section Springline Double-Hung Window
Jamb 2 x 4 Wall
Jamb 2 x 6 Wall
Jamb 2 x 4 Wall Horizontal Section Rectangular and Archtop Double-Hung Window
4 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with window. Dark-colored areas are additional Andersen parts required to complete window assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
184
6 1 8" (156)
SECTION REFERENCE
Window Details .......................... 188 Combination Designs ................. 259 Performance Data ...................... 269
Architectural Specialty Windows
ARCHITECTURAL SPECIALTY WINDOWS Features

B B
Accessories
Jambs A variety of jamb designs a available to complement are A Andersen 400 Series and 2 200 Series products. A variety of basic unit jamb w widths are available to match 4 400 Series and 200 Series u units. Specify desired jamb w width when ordering.
A A E
Sold Separately.
FRAME
Extension Jambs Standard jamb depths are . 4 9/16" or 2 7/8" Extension jambs are available for the following wall thicknesses:
4 9/16" 5 1/4" 6 9/16" 7 1/8"
Interior Arch Casing Available in colonial or ranch styles. Additional proles are also available. For easy integration and consistency, casing dimensions are consistent with Wood Moulding and Millwork Producers Association specications. Available in pine, oak, maple, alder, cherry, douglas r and mahogany.**
G GLASS
Additional dimensions are also available. Contact your Andersen supplier for more information. All sizes are available unnished or with white, birch bark or primed nishes. All extension jambs are available for jobsite application or can be factory applied. Plinth Blocks For enhancing casing transitions. Decorated with a radial sunburst, or use the reverse side ush face.
D C D C
E High-Performance
options include:
Low-E4 glass
glass
2 1/4" Colonial style. WM366.
FRAME
Low-E4 SmartSun glass Low-E4 Sun glass
A Heavy-duty aluminum
cladding protects the frame exterior, providing lowmaintenance durability. Standard cladding nish meets AAMA 2604. An optional nish that meets the AAMA 2605 standard is also available.
C Wood members are treated

with a water-repellent wood preservative for long-lasting* protection and performance. Radii are made of laminated continuous veneers. Lineal components are solid or engineered wood with a pine core.
PATTERNED GLASS
B A vinyl installation ange

extends 1 1/2" around the perimeter of the unit to help properly position the unit in the opening. Installation clips are standard for increased structural anchoring to building members. Mounted around the frame perimeter, the clips rotate into position and can be bent into place against the framing members to suit all jamb conditions.
D Silicone glazing bead

Architectural specialty windows are available with Stormwatch protection. Contact your Andersen supplier.
* For complete information on our limited warranties, visit andersenwindows.com or contact your Andersen supplier.
For arch windows: 2 7/8" x 4" size for use with 2 1/4" and 2 1/2" casing, 3 7/8" x 5 1/4" size for use with 3 1/2" casing.
For more information about glass, patterned glass, grilles and installation accessories, see pages 1232 or visit
andersenwindows.com
For Circle Top, elliptical, circle and oval windows: 2 7/8" size for use with 2 1/4" and 2 1/2" casing, 3 7/8" size for use with 3 1/2" casing.
2 1/4" Ranch style. WM324. 2 1/2" Ranch style. WM315.

** Actual wood is Sapele, also known as African mahogany, a non-endangered hardwood with color and characteristics similar to American mahoganies.
Exterior
White Sandtone
Interior
Birch Bark Dove Gray Slate Blue Spruce
Terratone
pine
oak
maple
alder
cherry
Terra Cotta
Cocoa Bean Dark Ivy
Canvas
River Rock
Driftwood

Printing limitations prevent exact color duplication. See your dealer for actual color samples.
douglas fir
mahogany**
white
birch bark
primed white
186
Grilles are available to match the windows interior and exterior. Naturally occurring variations in grain, color and texture make each wood specialty window one-of-a-kind.
FIXED WINDOWS
Andersen architectural specialty windows are available in a variety of sizes. Fixed unit proles may vary dependent upon shape. Contact your Andersen supplier for specic sizes, details and joining information.
Rectangle
Right Triangle
Isosceles Triangle
Trapezoid
Angled Pentagon
Peak Pentagon
Parallelogram
Equilateral Hexagon
Diamond
Octagon
Double Clip Corner
Gothic
Circle Top
Quarter Round
Full Chord
Partial Chord
Elliptical
Extended Gothic
Springline
Springline Flanker
Archtop
Unequal Leg Arch
Circle
Oval
The Andersen architectural specialty window shapes below are also available by special order.
Partial Arch
Partial Elliptical
Reverse Partial Chord
Extended Reverse Partial Chord
Extended Reverse Chord
Quatrefoil
Quarter Arch
Partial Extended Arch
Eyebrow
Extended Eyebrow
Extended Elliptical
187
Architectural Specialty Windows
ARCHITECTURAL SPECIALTY WINDOWS

Specialty Window Details
Scale 11 2" = 1'-0" (1:8)
Complements Casement, Awning and Picture Windows 5 7 8" (149) 1 5 16" (33) 4 9 16" (116) Jamb Width 1 5 16" (33) Complements Double-Hung Windows and Patio Doors 5 7 8" (149) 4 9 16" (116) Jamb Width
1 13 16" (46) Lineal Head
1 1 8" (29) 7 8" (23)
1 1 2" (38) Lineal Head
13 16" 11 16"
(21) (18)
Curved Head
Curved Extension Jamb
1 1 8" (29) 7 8" (23)
13 16" 11 16"
(21) (18)
Curved Head Interior Trim Stop

11 16" (18) 13 16" (21)
11 16" 7 8"
(23) (29)
Sill Vertical Section 1 1 8" (29) 4 9 16" (116) Jamb Width

7 8"
Sill Vertical Section

11 16"
(23) 4 9 16" (116) Jamb Width
(18)
13 16"
(21) Mullion
1 5 16" (33)
Jamb
Unit Dimension Width (3) Minimum Rough Opening Width

1 8"
1 5 16" (33)
Jamb
Jamb
Horizontal Section
Horizontal Section
Horizontal (stack) Non-Reinforced Joining Detail

Scale 11 2" = 1'-0" (1:8)
Horizontal Reinforced LVL Joining Detail

Scale 11 2" = 1'-0" (1:8)
Vertical Section Specialty over 400 Series Casement Window
Vertical Section Specialty over 400 Series Woodwright Double-Hung Window
Vertical Section Specialty over 200 Series Tilt-Wash Double-Hung Window Vertical Section Specialty over 400 Series Frenchwood Hinged Inswing Patio Door
For more joining information see the combination design section starting on page 259.
4 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with window. Dark-colored areas are additional Andersen parts required to complete window assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings.
188
SECTION REFERENCE
Styles & Size Ranges...........191192 Door Details ....................... 193194 Performance Data ...................... 269
Architectural Folding Outswing Patio Doors
ARCHITECTURAL FOLDING OUTSWING PATIO DOORS Features

When closed, these doors create a ate stately wall of light. When open, en, they transform a room into a gateway to the world outside. With standard or custom panel el designs, congurations up to 48 feet wide and operating modes odes that let you open the doors from om the left, right or center, Andersen sen folding outswing patio doors will impress even the most demanding customers.
B A
PA PANEL
The aluminum clad panel has a dual weather strip design at the bottom and along the panel edges botto providing an airtight seal. prov Available in a traditional style Avai with a tall bottom rail and a contemporary style with equal cont stiles and rails. stile
GLASS
Panels are silicone bed glazed and nished with an interior wood stop.
C
Standard
SIL SILL
Thre Three sill options are available:
High-Performance glass options include: Low-E4 tempered glass Low-E4 SmartSun tempered glass Low-E4 Sun tempered glass
D
FRAME
aluminum cladding protects the exterior from the elements. Both frame and panels are available with wood exteriors as a special product request.
C The standard sill, which offers

a PG 30 rating for sizes up to 24' wide and 10' tall, is available in painted gray or painted dark bronze.
D The ush track option

places the track even with the nished oor. Flush Track
Additional glass options are available. Contact your Andersen supplier. (Glass option must be specied.
B The engineered wood frame

members are treated with a water-repellent wood preservative for long-lasting* protection and performance.
E The low prole option provides

Traditional easy accessibility. Available in painted gray or dark bronze.
EXTERIOR FINISH
The aluminum exterior frame and clad panels feature a durable, low-maintenance AAMA 2605 nish. Contemporary
E
Low Profile
Exterior
White Sandtone
Interior
Terratone
pine
oak
maple
alder
birch bark
Terra Cotta
Cocoa Bean Dark Ivy
Canvas
River Rock
Driftwood
Coral Green
Red Rock
cherry
douglas fir
mahogany**
white
primed white
Hardware
Albany
black gold dust stone white
Sold Separately.
Grilles are available to match the doors interior and exterior. Naturally occurring variations in grain, color and texture make each architectural door panel one-of-a-kind.
Tribeca
white stone
Anvers
bright bras brass nicke satin nickel b oil rubbed bronze
Newbury
bright brass antique brass polished chrome brushed chrome satin nickel oil rubbed bronze
Covington
bright brass antique brass oil rubbed bronze
Whitmore
bright brass antique brass satin nickel oil rubbed bronze
Encino
distressed nickel distressed bronze
Yuma
distressed nickel distressed bronze
Bold names denote nish shown.
Hardware Finishes
bright brass antique brass polished chrome brushed chrome satin nickel oil rubbed bronze distressed nickel distressed bronze white stone gold dust black
Printing limitations prevent exact nish replication. See your Andersen supplier for actual nish samples. Tribeca and Albany hardware are zinc diecast with powder-coated durable nish. Other hardware is solid forged brass. Mix-and-match interior and exterior style and nish options are available. Bright brass and satin nickel nishes feature a 10-year limited warranty. ** Actual wood is Sapele, also known as African mahogany, a non-endangered hardwood with color and characteristics similar to American mahoganies.
190
Accessories
PATTERNED GLASS
FRAME
Extension Jambs Standard jamb depth is 6 9/16". Interior extension jambs are available up to 11".
Custom Panel Designs Rectangular panels are available with virtually any design. See your Andersen supplier for details. Custom Panel Examples
TRIM
Exterior Trim Options Aluminum brick mould is optional for clad folding doors.
1 5 16"
HARDWARE
2"
Aluminum Brick Mould Wood brick mould is pre-applied and comes standard on wood folding doors.
1 5 16"
2"
Locking System The folding patio door has a multi-point locking system with two hook bolts above and below the center dead bolt along with ush bolts on the non active panels that lock into the head and sill. This system provides added weathertightness and enhanced security. The ush bolts and pull handles are available in a matte black or satin stainless steel nish.
Wood Brick Mould
Pull Handle
Flush Bolt For more information about glass, patterned glass, grilles, insect screens and installation accessories, visit:
andersenwindows.com
191
ARCHITECTURAL FOLDING OUTSWING PATIO DOORS

Folding Outswing Patio Door Panel and Size Ranges
Scale 1 8" = 1'-0" (1:96)
CUSTOM HEIGHTS Minimum 6'-8" Maximum 10'-0"
2-Panels to 16-Panels
Custom sized in 1 8" increments. Contact

CUSTOM WIDTHS
Number of Panels 2-Panel 3-Panel 4-Panel 5-Panel 6-Panel Minimum to Maximum 3'-2 1/4" to 6'-8 1/8" 4'-8 5/8" to 9'-11 1/4" 6'-3 7/8" to 13'-2 1/4" 7'-9" to 16'-5 5/8" 9'-9 1/8" to 19'-8 3/4" Number of Panels 7-Panel 8-Panel 9-Panel 10-Panel 11-Panel Minimum to Maximum 10'-9 1/4" to 22'-11 7/8" 12'-4 1/2" to 26'-3 1/8" 13'-9 5/8" to 29'-6 1/2" 15'-4 3/4" to 32'-9 7/8" 16'-9 7/8" to 36'-0 3/4" Number of Panels 12-Panel 13-Panel 14-Panel 15-Panel 16-Panel Minimum to Maximum 18'-5 1/8" to 39'-4 1/8" 19'-10 1/4" to 42'-7 1/8" 21'-5 3/8" to 45'-10 1/2" 22'-10 1/4" to 48'-0" 24'-4 7/8" to 48'-0"
your Andersen supplier for dimensions and specifications. Doors open to the exterior. Traditional panel shown, see page 191 for additional panel styles.
"Minimum to Maximum" door width dimensions refers to frame to frame dimension.
Panel Configurations
Configurations are listed from left to right as viewed from the exterior.
Two Panel
2L 2R
Four Panel
4L 3L1R 2L2R
Five Panel
5L 4L1R 3L2R 5R 1L4R 2L3R
Six Panel
6L 5L1R 4L2R 3L3R 6R 1L5R 2L4R
Seven Panel
7L 6L1R 5L2R 4L3R 7R 1L6R 2L5R 3L4R
Eight Panel
8L 7L1R 6L2R 5L3R 4L4R 8R 1L7R 2L6R 3L5R
Three Panel
3L 2L1R 3R 1L2R 4R 1L3R
Nine Panel
8L1R 7L2R 6L3R 5L4R 4L5R 3L6R 2L7R 1L8R
Ten Panel
8L2R 7L3R(PA) 7L3R(AP) 6L4R 5L5R(PA) 5L5R(AP) 4L6R 3L7R(PA) 3L7R(AP) 2L8R
Eleven Panel
8L3R 7L4R 6L5R 5L6R 4L7R 3L8R
Twelve Panel
8L4R 7L5R(PA) 7L5R(AP) 6L6R 5L7R(PA) 5L7R(AP) 4L8R
Thirteen Panel
8L5R 7L6R 6L7R 5L8R
Fourteen Panel
8L6R 7L7R(PA) 7L7R(AP) 6L8R
Fifteen Panel
8L7R 7L8R
Sixteen Panel
8L8R
192
Design Criteria
To allow for proper performance and operation, verify the structural integrity of the header such that the maximum deflection with live and dead loads is limited to the lesser of L/750 of the span
Folding Outswing Patio Doors, Traditional/Contemporary Panel Details

Scale 11 2" = 1'-0" (1:8)
1 9 16" 4 1 16" 4 9 16"
Complete panel details not shown.

6 9 16" 1 5 16"
jamb
3 8"
and 1 4". The maximum weight per panel with Low-E4, SmartSun or Sun glass is 200 lbs. Weights using alternate glazings will need to be provided by Andersen.
5 5 8" Unit Dimension Minimum Rough Opening Stationary Jamb/Operating Jamb Horizontal Section
5 5 8"
jamb
3 8"
Construction
The standard construction of the folding outswing door is an aluminum clad exterior with a rich wood interior. Clad folding door details are shown. Wood folding doors are also available, visit andersenwindow.com/foldingdoors for
6 9 16"
1 9 16"
4 1 16"
4 9 16"
Complete panel details not shown.
1 5 16"
jamb
3 8"
For custom panel sets that meet in the middle, see the panel/astragal details below.
5 5 8" Unit Dimension Minimum Rough Opening Stationary Jamb/Stationary Jamb Horizontal Section 5 5 8"
jamb
3 8"
1 9 16"
9 5 8" Astragal Leading/Leading Horizontal Section Unit Dimension

1 9 16"
Clad folding door details are shown. Wood folding door details are available at andersenwindows.com/foldingdoors. 6 9 16" jamb width measurement is from backside of installation flange to inside edge of door frame. Light-colored areas are included with the door unit. Dark-colored areas are additional Andersen parts required to complete door assembly as shown and must be specified. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent complete or appropriate product installation methods or materials for application. Refer to product installation guide.
2 3 16"
9 3 8"
10 7 16" Astragal Passive/Active Horizontal Section
Astragal Leading/Active Horizontal Section
193
more information.
ARCHITECTURAL FOLDING OUTSWING PATIO DOORS

Folding Outswing Patio Doors, Traditional Panel Details
Scale 11 2" = 1'-0" (1:8)
1 5 16" 6 9 16" 1 5 16" 6 9 16" 1 5 16" 6 9 16"
3 7 16" 7 1 2" 7 1 2"
3 7 16" 7 1 2"
3 7 16"
4 1 8" Minimum Rough Opening Unit Dimension Minimum Rough Opening Unit Dimension
4 1 8" Minimum Rough Opening Unit Dimension
4 1 8"
Unobstr. Glass
Unobstr. Glass
sill
Unobstr. Glass
head
head sill
head sill
9 9 16"
1 13 16"
Dimension from subfloor to top of door threshold may vary with type of installation method used.
7 16"
9 9 16"
1 2"
9 9 16"
7 8"
Dimension from top of finished floor.
Vertical Section Traditional Panel, Standard Sill
Vertical Section Traditional Panel, Low Profile Threshold
Vertical Section Traditional Panel, Flush Sill (Track-In-Floor)
Folding Outswing Patio Doors, Contemporary Panel Details

Scale 11 2" = 1'-0" (1:8)
1 1 16" 6 9 16" 1 5 16" 6 9 16" 1 5 16" 6 9 16"
3 7 16" 7 1 2" 7 1 2"
3 7 16" 7 1 2"
3 7 16"
4 1 8" Minimum Rough Opening Unit Dimension Minimum Rough Opening Unit Dimension
4 1 8" Minimum Rough Opening Unit Dimension
4 1 8"
Unobstr. Glass
Unobstr. Glass
head sill
Unobstr. Glass
head sill
head sill
5 15 16"
1 13 16"
Dimension from subfloor to top of door threshold may vary with type of installation method used.
7 16"
5 7 16"
1 2"
4 15 16"
7 8"
Vertical Section Contemporary Panel, Standard Sill
Vertical Section Contemporary Panel, Low Profile Threshold
Vertical Section Contemporary Panel, Flush Sill (Track-In-Floor)
Clad folding door details are shown. Wood folding door details are available at andersenwindows.com/foldingdoors. 6 9 16" jamb width measurement is from backside of installation flange to inside edge of door frame. Light-colored areas are included with the door unit. Dark-colored areas are additional Andersen parts required to complete door assembly as shown and must be specified. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent complete or appropriate product installation methods or materials for application. Refer to product installation guide.
194
SECTION REFERENCE
Springline Patio Doors
Door Dimensions & Specications ......................... 197 Door Details .....................197198
Arch Patio Doors

Door & Sidelight Dimensions & Specications .................199200 Sidelight Details & Joining Details......................... 200 Door Details .................... 201202
Architectural Curved Top Patio Doors
ARCHITECTURAL CURVED TOP PATIO DOORS Features es

B
Accessories
PATTERNED GLASS
A H
Sold Separately.
FRAME
FRAME
Extension Jambs Inswing and outswing standard jamb depth is 4 9/16." Inswing is also available in a 6 9/16" jamb depth. Interior extension jambs are available in the following thicknesses:
5 1/4" 6 9/16" 7 1/8"
HARDWARE
A Heavy-duty
extruded aluminum cladding protects the frame exterior, providing low-maintenance durability. Standard cladding nish meets AAMA 2604. An optional nish that swing s meets the AAMA 2605 Inswing 05 Inswing standard is also available. Installation ange extends 1 1/2" around three sides D of the unit to help properly position the unit in the opening. Installation clips are standard for increased structural anchoring to building members. Mounted around the frame perimeter, the clips rotate into position and can be bent into place against the framing members to suit all jamb conditions.
HARDWARE
G E
Multi-Point Locking System/ Expanded Offering The Architectural hinged patio door has a multi-point locking system, with two hook bolts above and below the dead bolt. This system provides added weathertightness and enhanced security. For hardware style and nish options see page 16.
C
Interior extension jambs on inswing units will restrict the full opening of the door.
Exterior Keyed Lock A six-pin key cylinder lock is available for all patio doors in styles and nishes that coordinate with hardware. This lock allows the door to be locked and unlocked from the exterior. Hardware Options See pages 1617 for hardware styles and nish options.
Outswing
rainskirt at the panel sides and top for added protection.
PANEL
Hinges Ball bearing hinges are standard and are available in satin nickel, stainless steel, oil rubbed bronze and white nishes to complement hardware trimsets. Operation Inswing and outswing units are available. Choose left-hinged, right-hinged or stationary as viewed from the exterior.
aluminum cladding protects the panel exterior, providing lowmaintenance durability.
B Wood frame members are

treated with a water-repellent wood preservative for longlasting* protection and performance. Radii are made of laminated continuous veneers. Lineal components are engineered wood with a pine core.
F Panel interior surfaces

are unnished wood veneers. Available species are pine, oak, maple, alder, cherry, douglas r and mahogany.**
Casings Curved interior casings are available in the same proles as other Andersen products. Curved exterior aluminum and wood casings are available in matching radii and a variety of proles.

C Extruded aluminum sill is

thermally broken and available in painted bronze or gray nish. Innovative sill design provides superior water management. Standard inswing sills have an oak cap. Maple or mahogany** are optional. Inswing sills have an interior wood trim strip to match the interior nish.
GLASS GLASS
D One-piece compression
weatherstripping at the frame sides and head protects against air and water inltration. Flexible thermoplastic sweep is featured at the bottom of the panel on inswing units. Outswing doors also feature a polypropylene
H High-Performance glass options include:

Low-E4
tempered glass
Low-E4 SmartSun
tempered glass
Low-E4 Sun tempered glass
** Actual wood is Sapele, also known as African mahogany, a non-endangered hardwood with color and characteristics similar to American mahoganies.
Additional glass options are available. Contact your Andersen supplier. (Glass option must be specied.)
andersenwindows.com
Exterior
White Sandtone
Interior
Terratone
pine
oak
maple
alder
birch bark
Terra Cotta
Cocoa Bean Dark Ivy
Canvas
River Rock
Driftwood

cherry
douglas fir
mahogany**
white
primed white
196
Patio Door Heights
Custom-size doors are available in 1 8" increments.

AHISDxx80 AHOSDxx80 AHISDxx80AP/PA AHOSDxx80AP/PA
Traditional panels are standard. Custom designed and 3 4-light panels are also available. Stationary single (S) or stationary 2-panel (SS) doors are also available (i.e. AHISD3180S or AHOSD4080SS).
Springline Inswing (AHISD) and Springline Outswing (AHOSD) Patio Door Dimensions & Opening Specifications
Door Dimension Door Number
3180 3380 4080AP/PA 4080AP/PA* 5080AP/PA 5080AP/PA* 5480AP/PA 5480AP/PA* 6080AP/PA 6080AP/PA* 6480AP/PA 6480AP/PA*
Min. Rough Opening Width Inches

37" 39" 48" 48" 60" 60" 64" 64" 72" 72" 76" 76
Width Inches
35 15/16" 37 15/16" 47 1/4" 47 1/4" 59 1/4" 59 1/4" 63 1/4" 63 1/4" 71 1/4" 71 1/4" 75 1/4" 75 1/4"
Height Inches
95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2"
Height Inches
96" 96" 96" 96" 96" 96" 96" 96" 96" 96" 96" 96"
Radius Inches
18" 19" 23 5/8" 23 5/8" 29 5/8" 29 5/8" 31 5/8" 31 5/8" 35 5/8" 35 5/8" 37 5/8" 37 5/8"
Inswing Outswing Clear Opening Clear Opening Clear Clear Shoulder Width Full Width Full Height Opening Venting 90 Width Full Width Full Height Opening Venting Height 90 Inches Inches Inches Inches Inches Inches Sq. Ft. Sq. Ft. Sq. Ft. Sq. Ft. Inches
77 1/2" 76 1/2" 71 7/8" 71 7/8" 65 7/8" 65 7/8" 63 7/8" 63 7/8" 59 7/8" 59 7/8" 57 7/8" 57 7/8" 30 7/8" 32 7/8" 39 15/16" 18 15/16" 51 15/16" 24 15/16" 55 15/16" 26 15/16" 63 15/16" 30 15/16" 67 15/16" 32 15/16" 32 13/16" 34 13/16" 43 13/16" 20 7/8" 55 13/16" 26 7/8" 59 13/16" 28 7/8" 67 13/16" 32 7/8" 71 13/16" 34 7/8" 75 3/4" 74 3/4" 70 1/8" 70 1/8" 64 1/8" 64 1/8" 62 1/8" 62 1/8" 58 1/8" 58 1/8" 56 1/8" 56 1/8" 17.26 18.07 21.34 10.17 24.85 11.97 25.80 12.46 27.37 13.27 27.99 13.59 20.27 21.45 26.72 11.72 33.54 14.53 35.77 15.45 40.15 17.24 42.30 19.84 31 3/8" 33 3/8" 40 11/16" 19 1/4" 52 11/16" 25 1/4" 56 11/16" 27 1/4" 64 11/16" 31 1/4" 68 11/16" 33 1/4" 33 5/16" 35 5/16" 44 5/8" 21 1/4" 56 5/8" 27 1/4" 60 5/8" 29 1/4" 68 5/8" 33 1/4" 72 5/8" 35 1/4" 75 3/4" 74 3/4" 70 1/8" 70 1/8" 64 1/8" 64 1/8" 62 1/8" 62 1/8" 58 1/8" 58 1/8" 56 1/8" 56 1/8" 17.52 18.33 21.73 10.35 25.22 12.13 26.16 12.62 27.70 13.42 28.31 13.74 20.53 21.71 27.12 11.72 33.90 14.53 36.12 15.45 40.48 17.24 42.62 19.84
Glass Area Sq. Ft.

13.28 14.31 13.27 13.27 19.14 19.14 21.05 21.05 24.79 24.79 26.63 26.63
Overall Door Area Sq. Ft.

22.88 24.09 29.67 29.67 36.68 36.68 38.97 38.97 43.47 43.47 45.69 45.69
*Passive panel in closed position. To complete door identification, add AHISD (inswing) or AHOSD (outswing) to "Door Number" listed in table (i.e. AHISD3180 or AHOSD4080PA). "Door Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See page 33 for more details.
Scale 11 2" = 1'-0" (1:8)

4 9 16" Jamb Width Exterior Trim (optional)
1 5 16"
4 9 16" Jamb Width
1 5 16"
5 1 2"
3 8"
5 1 2" Unit Dimension Width Rough Opening Width Horizontal Section

3 8"
Exterior Trim (optional) Rough Opening Height Unit Dimension Height
4 9 16" Jamb Width
5 1 2"
1 5 16"
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
10 7 16"
5 1 2"
3 8"
10 7 16" Unit Dimension Width Rough Opening Width Horizontal Section 2-Panel
5 1 2"
3 8"
Exterior Trim (optional)
1 11 16"
Vertical Section
4 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
197
Springline Inswing Patio Door Details 4 9 16" Jamb Width
ARCHITECTURAL CURVED TOP PATIO DOORS

Springline Inswing Patio Door Details 6 9 16" Jamb Width
Scale 11 2" = 1'-0" (1:8)
Exterior Trim (optional) 1 5 16" 6 9 16" Jamb Width
6 9 16" Jamb Width
1 5 16"
5 1 2" Unit Dimension Width

3 8"
5 1 2"
3 8"
Rough Opening Height
Rough Opening Width Horizontal Section
5 1 2"
6 9 16" Jamb Width
10 7 16"
1 11 16" 1 5 16"
5 1 2"
3 8"
5 1 2"
3 8"
Exterior Trim (optional) Vertical Section
Springline Outswing Patio Door Details 4 9 16" Jamb Width

Scale 11 2" = 1'-0" (1:8)
4 9 16" Jamb Width Exterior Trim (optional) 1 5 16" 4 9 16" Jamb Width
1 5 16"
5 1 2"
3 8"

3 8"
4 9 16" Jamb Width
5 1 2"
1 5 16"
10 7 16"
5 1 2"
3 8"
5 1 2"
3 8"
1 3 4"
Vertical Section
4 9/16" and 6 9/16" jamb width measurements are from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
198
Patio Door Heights
Custom-size doors are available in 1 8" increments. Traditional panels are standard. Custom designed
AHIADxx68 AHOADxx68 AHIADxx611 AHOADxx611 AHIADxx80 AHOADxx80 AHIADxx68AP/PA AHOADxx68AP/PA AHIADxx611AP/PA AHOADxx611AP/PA AHIADxx80AP/PA AHOADxx80AP/PA
and 3 4-light panels are also available. Stationary single (S) or stationary 2-panel (SS) doors are also available (i.e. AHIAD2168S or AHOAD4080SS).
Arch Inswing (AHIAD) and Arch Outswing (AHOAD) Patio Door Dimensions & Opening Specifications
2168 2768 2968 3168 3368 21611 27611 29611 31611 33611 2180 2780 2980 3180 3380 4068AP/PA 4068AP/PA* 5068AP/PA 5068AP/PA* 5468AP/PA 5468AP/PA* 6068AP/PA 6068AP/PA* 6468AP/PA 6468AP/PA* 40611AP/PA 40611AP/PA* 50611AP/PA 50611AP/PA* 54611AP/PA 54611AP/PA* 60611AP/PA 60611AP/PA* 64611AP/PA 64611AP/PA* 4080AP/PA 4080AP/PA* 5080AP/PA 5080AP/PA* 5480AP/PA 5480AP/PA* 6080AP/PA 6080AP/PA* 6480AP/PA 6480AP/PA*

25" 31" 33" 37" 39" 25" 31" 33" 37" 39" 25" 31" 33" 37" 39" 48" 48" 60" 60" 64" 64" 72" 72" 76" 76" 48" 48" 60" 60" 64" 64" 72" 72" 76" 76" 48" 48" 60" 60" 64" 64" 72" 72" 76" 76"
Width Inches
23 15/16" 29 15/16" 31 15/16" 35 15/16" 37 15/16" 23 15/16" 29 15/16" 31 15/16" 35 15/16" 37 15/16" 23 15/16" 29 15/16" 31 15/16" 35 15/16" 37 15/16" 47 1/4" 47 1/4" 59 1/4" 59 1/4" 63 1/4" 63 1/4" 71 1/4" 71 1/4" 75 1/4" 75 1/4" 47 1/4" 47 1/4" 59 1/4" 59 1/4" 63 1/4" 63 1/4" 71 1/4" 71 1/4" 75 1/4" 75 1/4" 47 1/4" 47 1/4" 59 1/4" 59 1/4" 63 1/4" 63 1/4" 71 1/4" 71 1/4" 75 1/4" 75 1/4"
Height Inches
79 1/2" 79 1/2" 79 1/2" 79 1/2" 79 1/2" 82 3/8" 82 3/8" 82 3/8" 82 3/8" 82 3/8" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 79 1/2" 79 1/2" 79 1/2" 79 1/2" 79 1/2" 79 1/2" 79 1/2" 79 1/2" 79 1/2" 79 1/2" 82 3/8" 82 3/8" 82 3/8" 82 3/8" 82 3/8" 82 3/8" 82 3/8" 82 3/8" 82 3/8" 82 3/8" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2"
Height Inches
80" 80" 80" 80" 80" 83" 83" 83" 83" 83" 96" 96" 96" 96" 96" 80" 80" 80" 80" 80" 80" 80" 80" 80" 80" 83" 83" 83" 83" 83" 83" 83" 83" 83" 83" 96" 96" 96" 96" 96" 96" 96" 96" 96" 96"
Radius Inches
36" 48 " 48 " 48 " 48 " 36" 48 " 48 " 48 " 48 " 36" 48 " 48 " 48 " 48 " 48 " 48 " 96" 96" 96" 96" 96" 96" 96" 96" 48 " 48 " 96" 96" 96" 96" 96" 96" 96" 96" 48" 48" 96" 96" 96" 96" 96" 96" 96" 96"
Inswing Outswing Clear Opening Clear Opening Shoulder Clear Clear Width Full Width Full Height Opening Venting 90 Width Full Width Full Height Opening Venting Height 90 Inches Inches Inches Inches Inches Inches Inches Sq. Ft. Sq. Ft. Sq. Ft. Sq. Ft.
77 7/16" 77 1/8" 76 3/4" 76" 75 5/8" 80 5/16" 80" 79 5/8" 78 7/8" 78 1/2" 93 7/16" 93 1/8" 92 3/4" 92" 91 5/8" 73 5/16" 73 5/16" 74 13/16" 74 13/16" 74 1/8" 74 1/8" 72 5/8" 72 5/8" 71 13/16" 71 13/16" 76 3/16" 76 3/16" 77 11/16" 77 11/16" 77" 77" 75 1/2" 75 1/2" 74 11/16" 74 11/16" 89 5/16" 89 5/16" 90 13/16" 90 13/16" 90 1/8" 90 1/8" 88 5/8" 88 5/8" 87 13/16" 87 13/16" 18 7/8" 24 7/8" 26 7/8" 30 7/8" 32 7/8" 18 7/8" 24 7/8" 26 7/8" 30 7/8" 32 7/8" 18 7/8" 24 7/8" 26 7/8" 30 7/8" 32 7/8" 39 15/16" 18 15/16" 51 15/16" 24 15/16" 55 15/16" 26 15/16" 63 15/16" 30 15/16" 67 15/16" 32 15/16" 39 15/16" 18 15/16" 51 15/16" 24 15/16" 55 15/16" 26 15/16" 63 15/16" 30 15/16" 67 15/16" 32 15/16" 39 15/16" 18 15/16" 51 15/16" 24 15/16" 55 15/16" 26 15/16" 63 15/16" 30 15/16" 67 15/16" 32 15/16" 20 13/16" 26 13/16" 28 13/16" 32 13/16" 34 13/16" 20 13/16" 26 13/16" 28 13/16" 32 13/16" 34 13/16" 20 13/16" 26 13/16" 28 13/16" 32 13/16" 34 13/16" 43 13/16" 20 7/8" 55 13/16" 26 7/8" 59 13/16" 28 7/8" 67 13/16" 32 7/8" 71 13/16" 34 7/8" 43 13/16" 20 7/8" 55 13/16" 26 7/8" 59 13/16" 28 7/8" 67 13/16" 32 7/8" 71 13/16" 34 7/8" 43 13/16" 20 7/8" 55 13/16" 26 7/8" 59 13/16" 28 7/8" 67 13/16" 32 7/8" 71 13/16" 34 7/8" 74 11/16" 74 5/16" 74" 73 5/16" 73 7/8" 77 9/16" 77 3/16" 76 7/8" 76 3/16" 76 3/4" 90 11/16" 90 5/16" 90" 89 5/16" 89 7/8" 70 7/8" 70 7/8" 72 1/8" 72 1/8" 71 1/2" 71 1/2" 70 1/16" 70 1/16" 69 1/4" 69 1/4" 73 3/4" 73 3/4" 75" 75" 74 3/8" 74 3/8" 72 15/16" 72 15/16" 72 1/8" 72 1/8" 86 7/8" 86 7/8" 88 1/8" 88 1/8" 87 1/2" 87 1/2" 86 1/16" 86 1/16" 85 1/4" 85 1/4" 10.79 13.84 14.81 16.71 17.86 11.21 14.37 15.38 17.36 18.55 13.11 16.82 18.01 20.35 21.73 21.56 10.27 27.95 13.46 29.70 14.34 32.99 16.00 34.53 16.77 22.44 10.69 29.07 14.00 30.89 14.91 34.35 16.65 35.97 17.47 26.43 12.59 34.16 16.45 36.34 17.55 40.53 19.65 42.51 20.65 12.46 15.70 16.77 18.88 22.01 14.34 18.12 19.37 21.84 25.15 16.22 20.54 21.97 24.80 28.29 25.61 12.22 32.24 15.54 34.29 16.56 38.33 18.58 44.22 21.53 29.56 14.29 37.28 18.15 39.69 19.35 44.46 21.74 50.70 25.22 33.52 14.29 42.32 18.15 45.09 19.35 50.58 21.74 57.19 25.22 19 3/8" 25 3/8" 27 3/8" 31 3/8" 33 3/8" 19 3/8" 25 3/8" 27 3/8" 31 3/8" 33 3/8" 19 3/8" 25 3/8" 27 3/8" 31 3/8" 33 3/8" 40 11/16" 19 1/4" 52 11/16" 25 1/4" 56 11/16" 27 1/4" 64 11/16" 31 1/4" 68 11/16" 33 1/4" 40 11/16" 19 1/4" 52 11/16" 25 1/4" 56 11/16" 27 1/4" 64 11/16" 31 1/4" 68 11/16" 33 1/4" 40 11/16" 19 1/4" 52 11/16" 25 1/4" 56 11/16" 27 1/4" 64 11/16" 31 1/4" 68 11/16" 33 1/4" 21 5/16" 27 5/16" 29 5/16" 33 5/16" 35 5/16" 21 5/16" 27 5/16" 29 5/16" 33 5/16" 35 5/16" 21 5/16" 27 5/16" 29 5/16" 33 5/16" 35 5/16" 44 5/8" 21 1/4" 56 5/8" 27 1/4" 60 5/8" 29 1/4" 68 5/8" 33 1/4" 72 5/8" 35 1/4" 44 5/8" 21 1/4" 56 5/8" 27 1/4" 60 5/8" 29 1/4" 68 5/8" 33 1/4" 72 5/8" 35 1/4" 44 5/8" 21 1/4" 56 5/8" 27 1/4" 60 5/8" 29 1/4" 68 5/8" 33 1/4" 72 5/8" 35 1/4" 74 3/4" 74 3/8" 74 1/16" 73 3/8" 73" 77 5/8" 77 1/4" 76 15/16" 76 1/4" 75 7/8" 90 3/4" 90 3/8" 90 1/16" 89 3/8" 89" 70 3/4" 70 3/4" 72 1/8" 72 1/8" 71 7/16" 71 7/16" 70" 70" 69 3/16" 69 3/16" 73 5/8" 73 5/8" 75" 75" 74 5/16" 74 5/16" 72 7/8" 72 7/8" 72 1/16" 72 1/16" 86 3/4" 86 3/4" 88 1/8" 88 1/8" 87 7/16" 87 7/16" 86" 86" 85 3/16" 85 3/16" 11.06 14.11 15.08 16.97 17.90 11.49 14.65 15.66 17.64 18.61 13.43 17.14 18.33 20.68 21.83 21.93 10.44 28.36 13.65 30.08 14.51 33.36 16.16 34.89 16.94 22.82 10.86 29.49 14.19 31.29 15.09 34.73 16.83 36.34 17.64 26.88 12.80 34.65 16.68 36.81 17.76 40.98 19.86 42.96 20.85 12.46 15.70 16.77 18.88 22.01 14.39 18.17 19.41 21.89 25.19 16.31 20.63 22.06 24.89 28.38 25.61 12.22 32.24 15.54 34.29 16.56 38.33 18.58 44.22 21.53 29.64 14.29 37.35 18.15 39.77 19.35 44.53 21.74 50.78 25.22 33.66 14.29 42.47 18.15 45.24 19.35 50.73 21.74 57.33 25.22
Glass Area Sq. Ft.

5.66 8.28 9.15 10.87 11.72 5.93 8.68 9.58 11.39 12.28 7.09 10.38 11.47 13.63 14.71 10.93 10.93 16.30 16.30 17.97 17.97 21.25 21.25 22.86 22.86 11.46 11.46 17.09 17.09 18.84 18.84 22.28 22.28 23.98 23.98 13.76 13.76 20.50 20.50 22.61 22.61 26.78 26.78 28.83 28.83

14.49 17.85 18.95 21.13 24.36 16.65 20.55 21.83 24.37 27.78 18.81 23.25 24.71 27.62 31.20 28.07 28.07 34.97 34.97 37.09 37.09 41.27 41.27 47.36 47.36 32.34 32.34 40.32 40.32 42.80 42.80 47.71 47.71 54.16 54.16 36.60 36.60 45.67 45.67 48.51 48.51 54.14 54.14 60.95 60.95
*Passive panel in closed position. To complete door identification, add AHIAD (inswing) or AHOAD (outswing) to "Door Number" listed in table (i.e. AHIAD2168 or AHOAD4068PA). "Door Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See page 33 for more details.
199

Arch Sidelights
Custom sized in 1 8" increments.

ASLAD13xx68 ASLAD13xx80 ASLAD17xx68 ASLAD17xx80
Standard sizes in two widths and heights. Contact your Andersen supplier for sidelight dimensions and specifications. Sash glazed arch sidelights, shown, are standard. Direct set arch sidelights are available by special order.
Order Designation Description

Viewed from the exterior.
17
AHIAD
3168
17
AHIAD
3168
17
AHIAD
6480
Door Flanking unit rough opg. width Architectural Hinged Inswing Arch Door
Active Right panel hinged
Door Flanking unit rough opg. width Architectural Hinged Inswing Arch Door
Active Left panel hinged
Flanking unit Right Door Passive width hinged rough opg. panel Architectural Hinged Left Active Inswing Arch Door hinged panel
Inswing arch patio doors (AHIAD) shown above, for outswing arch patio doors use AHOAD. Outswing patio doors open outward to the exterior.
Arch Sidelight Details

Scale 11 2" = 1'-0" (1:8)
1 5 16" Exterior Trim (optional) 4 9 16" Jamb Width 1 5 16" 6 9 16" Jamb Width
Vertical Reinforced Joining Detail

Scale 11 2" = 1'-0" (1:8)
2 3 8" 3 1 8" 2 3 8" 3 1 8"
5 1 2"
3 4" 3 15 16" Horizontal Section Vertical (ribbon) Joining Arch Inswing Patio Door to Arch Sidelight 4 9 16" Jamb Width
3 4" 3 15 16" Horizontal Section Vertical (ribbon) Joining Arch Inswing Patio Door to Arch Sidelight 6 9 16" Jamb Width
2 3 8" 10 7 16"
3 1 8"
11 16"
1 5 8"
3 4" 3 15 16" Horizontal Section Vertical (ribbon) Joining Arch Outswing Patio Door to Arch Sidelight 4 9 16" Jamb Width
Vertical Section 4 9 16" Jamb Width
Vertical Section 6 9 16" Jamb Width
4 9/16" and 6 9/16" jamb width measurements are from backside of installation flange. Light-colored areas are parts included with window and/or door. Dark-colored areas are additional Andersen parts required to complete window and/or door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Andersen recommends installation of doors into separate rough openings. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings.
200
Arch Inswing Patio Door Details 4 9 16" Jamb Width

Scale 11 2" = 1'-0" (1:8)
4 9 16" Jamb Width Exterior Trim (optional) 1 5 16" 4 9 16" Jamb Width
1 5 16"
5 1 2"
3 8"

3 8"
4 9 16" Jamb Width
5 1 2"
1 5 16"
10 7 16"
5 1 2"
3 8"
5 1 2"
3 8"
2 1 4"
Vertical Section
Arch Inswing Patio Door Details 6 9 16" Jamb Width

Scale 11 2" = 1'-0" (1:8)
6 9 16" Jamb Width
6 9 16" Jamb Width
3 8"
Unit Dimension Width Rough Opening Width
3 8"
Horizontal Section
6 9 16" Jamb Width
5 1 2"
5 1 2"
5 1 2"
1 5 16"
10 7 16"
5 1 2"
3 8"
5 1 2"
3 8"
2 1 4"
Vertical Section
4 9/16" and 6 9/16" jamb width measurements are from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Andersen recommends installation of doors into separate rough openings. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings.
201
1 5 16"
1 5 16"

Arch Outswing Patio Door Details 4 9 16" Jamb Width
Scale 11 2" = 1'-0" (1:8)
4 9 16" Jamb Width
1 5 16" Exterior Trim (optional)
4 9 16" Jamb Width
1 5 16"
5 1 2"
3 8"
5 1 2" Unit Dimension Width Rough Opening Width

3 8"
Horizontal Section
4 9 16" Jamb Width
5 1 2"
1 5 16"
5 1 2"
3 8"
5 1 2"
3 8"
10 7 16"
1 3 4"
Vertical Section
4 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
202
SECTION REFERENCE
Residential Springline Entranceways
Door Dimensions & Specications ......................... 205 Door Details ....................205206
Residential Arch & Rectangular Entranceways

Door & Sidelight Dimensions & Specications ................. 207208 Door & Sidelight Details ... 209212 Joining Details ......................... 212
Entranceway Transoms
Transom Dimensions & Specications ......................... 213 Transom Details & Joining Details ......................... 214
Commercial Outswing Entry Doors

Door & Sidelight Dimensions & Specications ......................... 217 Door & Sidelight Details ........... 218
Architectural Entranceways
ARCHITECTURAL RESIDE TECTURAL RESIDENTIAL ENTRANCEWAYS Features res

FRAME
B A
Accessories
GL GLASS
After-Market Hardware For hardware purchased separately, doors can be ordered predrilled for easy on-site installation. They can also be specied without hardware drilling. Operation Inswing and outswing units are available. Choose left-hinged, right-hinged or stationary as viewed from the exterior.
Sold Separately.
FRAME
Extension Jambs Inswing and outswing standard jamb depth is 4 9/16." Inswing is also available in a 6 9/16" jamb depth. Interior extension jambs are available in the following thicknesses:
5 1/4" 6 9/16" 7 1/8"
A Heavy-duty
extruded aluminum cladding protects the frame exterior, providing low-maintenance durability. Standard d cladding nish meets AAMA 2604. An optional nish that meets the AAMA 2605 standard is also available.
H
H High-Performance
options include: opti
G
glass
Low-E4 tempered glass Low-E4 SmartSun tempered
glass
Low-E4 Sun tempered glass
Inswing wing Installation ange extends 1 1/2" around three sides D of the unit to help properly C position the unit in the Outswing opening. Installation clips are standard for increased structural ctural anchoring to building members. thermoplastic sweep is featured Mounted around the frame at the bottom of the panel on perimeter, the clips rotate into inswing units. Outswing doors position and can be bent also feature a polypropylene into place against the rainskirt at the panel sides and framing members to suit top for added protection. all jamb conditions.
Additional glass options are Add available. Contact your Andersen ava supplier. (Glass option must be sup specied.) spec
SILL
A low-rise commercial sill is also available. See page 215 for more details.
Interior extension jambs on inswing units will restrict the full opening of the door. Casings Curved interior casings are available in the same proles as other Andersen products. Curved exterior aluminum and wood casings are available in matching radii and a variety of proles.
PA PATTERNED GLASS
Patt Patterned glass options are ava available. See page 12 for mor more details.
PANEL DESIGNS
HARDWARE
Multi-Point Locking System/ Expanded Offering The Architectual entranceways have a multi-point locking option. With two hook bolts above and below the dead bolt. This system provides added weathertightness and enhanced security. For hardware style and nish options see page 16. Selecting the multi-point option allows you to choose hardware in a variety of styles and nishes. Mixand-match style and nish options are available to get just the right look inside and out. Exterior Keyed Lock A six-pin key cylinder lock is available in styles and nishes that coordinate with hardware. This lock allows the door to be locked and unlocked from the exterior. Hinges Ball bearing hinges are standard and are available in satin nickel, stainless steel, oil rubbed bronze and white nishes to complement hardware trimsets.
603
702
HARDWARE
Handle Extension Handle extensions extend interior door handles an additional 1" from the door panel to accommodate interior blinds or shades. A second extender may be added to the spindle to increase the length an additional 1" to a 2" total extension. Extenders and spindles are sold separately. Extenders are available in nishes that coordinate with hardware.
B Wood frame members are

treated with a water-repellent wood preservative for longlasting* protection and performance. Radii are made of laminated continuous veneers. Lineal components are engineered wood with a pine core.
PANEL
aluminum cladding protects the panel exterior, providing lowmaintenance durability. Panels also available without cladding.
620
214
179
334
F Panel interior surfaces

are unnished wood veneers. Available species are pine, oak, maple, alder, cherry, douglas r and mahogany.**
C Extruded aluminum sill is

thermally broken and available in painted bronze or gray nish. Innovative sill design provides superior water management. Standard inswing sills have an oak cap. Maple or mahogany** are optional. Inswing sills have an interior wood trim strip to match the interior nish.
178
192

198
206
D One-piece compression
weatherstripping at the frame sides and head protects against air and water inltration. Flexible
261
199
andersenwindows.com
For additional panel design ideas, go to andersenwindows.com/ entranceways.
Exterior
White Sandtone
Interior
Terratone
pine
oak
maple
alder
birch bark
Terra Cotta
Cocoa Bean
Dark Ivy
Canvas
River Rock
Driftwood

cherry
douglas fir
mahogany**
white
primed white
204
Entranceway Heights

AESHIDxx68 AESHODxx68 AESHIDxx80 AESHODxx80 AESHIDxx80AP/PA AESHODxx80AP/PA
Available in custom designed panels, see page 204. Stationary single (S) or stationary 2-panel (SS) doors are also available (i.e. AESHID3068S or AESHOD4080SS).
Springline Inswing (AESHID) and Outswing (AESHOD) Entranceway Dimensions & Opening Specifications
3068 3668 3080 3680 4080AP/PA 4080AP/PA* 5080AP/PA 5080AP/PA* 5480AP/PA 5480AP/PA* 6080AP/PA 6080AP/PA* 7080AP/PA 7080AP/PA*

38 3/16" 44 3/16" 38 3/16" 44 3/16" 51 1/4" 51 1/4" 63 1/4" 63 1/4" 67 1/4" 67 1/4" 75 1/4" 75 1/4" 87 1/4" 87 1/4"
Width Inches
37 11/16" 43 11/16" 37 11/16" 43 11/16" 50 3/4" 50 3/4" 62 3/4" 62 3/4" 66 3/4" 66 3/4" 74 3/4" 74 3/4" 86 3/4" 86 3/4"
Height Inches
82" 82" 95" 95" 95" 95" 95" 95" 95" 95" 95" 95" 95" 95"
Height Inches
82 1/2" 82 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2"
Radius Inches
18 7/8" 21 7/8" 18 7/8" 21 7/8" 25 3/8" 25 3/8" 31 3/8" 31 3/8" 33 3/8" 33 3/8" 37 3/8" 37 3/8" 43 3/8" 43 3/8"
Inswing Clear Opening Shoulder Clear Width Full Width Full Height Height 90 Opening Inches Inches Inches Inches Sq. Ft.
63 1/8" 60 1/8" 76 1/8" 73 1/8" 69 5/8" 69 5/8" 63 5/8" 63 5/8" 61 5/8" 61 5/8" 57 5/8" 57 5/8" 51 5/8" 51 5/8" 32 13/16" 38 13/16" 32 13/16" 38 13/16" 43 13/16" 20 7/8" 55 13/16" 26 7/8" 59 13/16" 28 7/8" 67 13/16" 32 7/8" 79 13/16" 38 7/8" 34 7/8" 40 7/8" 34 7/8" 40 7/8" 47 15/16" 22 15/16" 59 15/16" 28
15
Venting Sq. Ft.

18.25 21.21 21.40 24.90 28.95 13.79 35.66 17.14 37.85 18.24 42.15 20.39 48.43 23.53
Outswing Clear Opening Clear 90 Width Full Width Full Height Opening Inches Inches Inches Sq. Ft.
Venting Sq. Ft.

18.34 21.29 21.50 25.00 29.04 13.79 35.74 17.14 37.92 18.24 42.23 20.39 48.50 23.53

20.41 23.46 23.81 27.40 31.56 31.56 38.46 38.46 40.72 40.72 45.15 45.15 51.62 51.62
61 5/8" 58 5/8" 74 5/8" 71 5/8" 68 1/8" 68 1/8" 62 1/8" 62 1/8" 60 1/8" 60 1/8" 56 1/8" 56 1/8" 50 1/8" 50 1/8"
14.92 16.64 18.07 20.33 22.68 10.85 25.86 12.48 26.70 12.92 28.04 13.62 29.22 14.25
33 1/8" 39 1/8" 33 1/8" 39 1/8" 44 3/16" 21" 56 3/16" 27" 60 3/16" 29" 68 3/16" 33" 80 3/16" 39"
35 1/16" 41 1/16" 35 1/16" 41 1/16" 48 1/8" 23" 60 1/8" 29" 64 1/8" 31" 72 1/8" 35" 84 1/8" 41"
61 5/8" 58 5/8" 74 5/8" 71 5/8" 68 1/8" 68 1/8" 62 1/8" 62 1/8" 60 1/8" 60 1/8" 56 1/8" 56 1/8" 50 1/8" 50 1/8"
15.01 16.72 18.17 20.42 22.77 10.88 25.94 12.51 26.77 12.94 28.11 13.64 29.28 14.27
/16"
63 15/16" 30 15/16" 71 15/16" 34 15/16" 83 15/16" 40 15/16"
*Passive panel in closed position. To complete door identification, add AESHID (inswing) or AESHOD (outswing) to "Door Number" listed in table (i.e. AESHID3068 or AESHOD4080PA). "Door Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See page 33 for more details.
Springline Inswing Entranceway Details 4 9 16" Jamb Width

Scale 11 2" = 1'-0" (1:8)
4 9 16" Jamb Width 1 5 16" 4 9 16" Jamb Width
1 5 16"
6 7 16"
3 8"
6 7 16" Unit Dimension Width Rough Opening Width Horizontal Section Rough Opening Height Unit Dimension Height
3 8"
4 9 16" Jamb Width
11 11 16"
1 5 16"
6 7 16"
3 8"
6 7 16"
3 8"
1 1 2"
Vertical Section
2-Panel Clad details shown, wood also available. 4 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
205
6 7 16"
ARCHITECTURAL RESIDENTIAL ENTRANCEWAYS

Springline Inswing Entranceway Details 6 9 16" Jamb Width
Scale 11 2" = 1'-0" (1:8)
6 9 16" Jamb Width
1 5 16"
6 9 16" Jamb Width
1 5 16"
3 8"
Unit Dimension Width Rough Opening Width Horizontal Section
3 8"
6 9 16" Jamb Width
6 7 16"
6 7 16"
6 7 16"
1 5 16"
11 11 16"
6 7 16"
3 8"
6 7 16"
3 8"
1 1 2"
Vertical Section
Springline Outswing Entranceway Details 4 9 16" Jamb Width

Scale 11 2" = 1'-0" (1:8)
4 9 16" Jamb Width
1 5 16"
4 9 16" Jamb Width
1 5 16"
6 7 16"
3 8"
6 7 16" Unit Dimension Width Rough Opening Width Horizontal Section Rough Opening Height Unit Dimension Height
3 8"
4 9 16" Jamb Width
11 15 16"
6 7 16"
1 5 16"
6 7 16"
3 8"
6 7 16"
3 8"
1 1 2"
Vertical Section
Clad details shown, wood also available. 4 9/16" and 6 9/16"jamb width measurements are from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
206
Entranceway Heights

AEAHIDxx68 AEAHODxx68 AEAHIDxx80 AEAHODxx80 AEAHIDxx68AP/PA AEAHODxx68AP/PA AEAHIDxx80AP/PA AEAHODxx80AP/PA
Available in custom designed panels, see page 204. Stationary single (S) and stationary 2-panel (SS) doors are also available (i.e. AEAHID2068S or AEAHOD4068SS).
Arch Inswing (AEAHID) and Arch Outswing (AEAHOD) Entranceway Dimensions & Opening Specifications
2068 2668 2868 3068 3668 2080 2680 2880 3080 3680 4068AP/PA 4068AP/PA* 5068AP/PA 5068AP/PA* 5468AP/PA 5468AP/PA* 6068AP/PA 6068AP/PA* 7068AP/PA 7068AP/PA* 4080AP/PA 4080AP/PA* 5080AP/PA 5080AP/PA* 5480AP/PA 5480AP/PA* 6080AP/PA 6080AP/PA* 7080AP/PA 7080AP/PA*

26 3/16" 32 3/16" 34 3/16" 38 3/16" 44 3/16" 26 3/16" 32 3/16" 34 3/16" 38 3/16" 44 3/16" 51 1/4" 51 1/4" 63 1/4" 63 1/4" 67 1/4" 67 1/4" 75 1/4" 75 1/4" 87 1/4" 87 1/4" 51 1/4" 51 1/4" 63 1/4" 63 1/4" 67 1/4" 67 1/4" 75 1/4" 75 1/4" 87 1/4" 87 1/4"
Width Inches
25 11/16" 31 11/16" 33 11/16" 37 11/16" 43 11/16" 25 11/16" 31 11/16" 33 11/16" 37 11/16" 43 11/16" 50 3/4" 50 3/4" 62 3/4" 62 3/4" 66 3/4" 66 3/4" 74 3/4" 74 3/4" 86 3/4" 86 3/4" 50 3/4" 50 3/4" 62 3/4" 62 3/4" 66 3/4" 66 3/4" 74 3/4" 74 3/4" 86 3/4" 86 3/4"
Height Inches
82" 82" 82" 82" 82" 95" 95" 95" 95" 95" 82" 82" 82" 82" 82" 82" 82" 82" 82" 82" 95" 95" 95" 95" 95" 95" 95" 95" 95" 95"
Height Inches
82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2"
Radius Inches
37 1/16" 48" 48" 48" 48" 37 1/16" 48" 48" 48" 48" 48" 48" 96" 96" 96" 96" 96" 96" 96" 96" 48" 48" 96" 96" 96" 96" 96" 96" 96" 96"
Inswing Clear Opening Shoulder Clear Height 90 Width Full Width Full Height Opening Inches Inches Inches Inches Sq. Ft.
79 11/16" 79 5/16" 78 15/16" 78 1/8" 76 3/4" 92 11/16" 92 5/16" 91 15/16" 91 1/8" 89 3/4" 74 3/4" 74 3/4" 76 3/4" 76 3/4" 76" 76" 74 7/16" 74 7/16" 71 5/8" 71 5/8" 87 3/4" 87 3/4" 89 3/4" 89 3/4" 89" 89" 87 7/16" 87 7/16" 84 5/8" 84 5/8" 20 13/16" 26 13/16" 28 13/16" 32 13/16" 38 13/16" 20 13/16" 26 13/16" 28 13/16" 32 13/16" 38 13/16" 43 13/16" 20 7/8" 55 13/16" 26 7/8" 59 13/16" 28 7/8" 67 13/16" 32 7/8" 79 13/16" 38 7/8" 43 13/16" 20 7/8" 55 13/16" 26 7/8" 59 13/16" 28 7/8" 67 13/16" 32 7/8" 79 13/16" 38 7/8" 22 7/8" 28 7/8" 30 7/8" 34 7/8" 40 7/8" 22 7/8" 28 7/8" 30 7/8" 34 7/8" 40 7/8" 47 15/16" 22 15/16" 59 15/16" 28 15/16" 63 15/16" 30 15/16" 71 15/16" 34 15/16" 83 15/16" 40 15/16" 47 15/16" 22 15/16" 59 15/16" 28 15/16" 63 15/16" 30 15/16" 71 15/16" 34 15/16" 83 15/16" 40 15/16" 77 3/16" 76 3/4" 76 7/16" 75 11/16" 74 3/8" 90 3/16" 89 3/4" 89 7/16" 88 11/16" 87 3/8" 72 7/16" 72 7/16" 74 3/16" 74 3/16" 73 1/2" 73 1/2" 71 15/16" 71 15/16" 69 1/4" 69 1/4" 85 7/16" 85 7/16" 87 3/16" 87 3/16" 86 1/2" 86 1/2" 84 15/16" 84 15/16" 82 1/4" 82 1/4" 12.26 15.39 16.39 18.33 21.11 14.33 18.00 19.18 21.48 24.80 24.11 11.54 30.88 14.91 32.63 15.79 35.94 17.45 40.37 19.69 28.44 13.61 36.29 17.52 38.41 18.58 42.43 20.61 47.94 23.38
Venting Sq. Ft.

12.46 15.70 16.77 18.88 22.01 14.53 18.31 19.55 22.03 25.70 25.61 12.22 32.24 15.54 34.29 16.56 38.33 18.58 44.22 21.53 29.94 14.29 37.65 18.15 40.07 19.35 44.83 21.74 51.80 25.22
Outswing Clear Opening Clear 90 Width Full Width Full Height Opening Inches Inches Inches Sq. Ft.
21 1/8" 27 1/8" 29 1/8" 33 1/8" 39 1/8" 21 1/8" 27 1/8" 29 1/8" 33 1/8" 39 1/8" 44 3/16" 21" 56 3/16" 27" 60 3/16" 29" 68 3/16" 33" 80 3/16" 39" 44 3/16" 21" 56 3/16" 27" 60 3/16" 29" 68 3/16" 33" 80 3/16" 39" 23 1/16" 29 1/16" 31 1/16" 35 1/16" 41 1/16" 23 1/16" 29 1/16" 31 1/16" 35 1/16" 41 1/16" 48 1/8" 23" 60 1/8" 29" 64 1/8" 31" 72 1/8" 35" 84 1/8" 41" 48 1/8" 23" 60 1/8" 29" 64 1/8" 31" 72 1/8" 35" 84 1/8" 41" 77 1/4" 76 13/16" 76 1/2" 75 3/4" 74 3/8" 77 1/4" 76 13/16" 76 1/2" 75 3/4" 74 3/8" 72 1/2" 72 1/2" 74 1/4" 74 1/4" 73 9/16" 73 9/16" 72" 72" 69 5/16" 69 5/16" 85 1/2" 85 1/2" 87 1/4" 87 1/4" 86 9/16" 86 9/16" 85" 85" 82 5/16" 82 5/16" 12.37 15.50 16.50 18.44 21.21 12.37 15.50 16.50 18.44 21.21 24.23 11.58 31.00 14.95 32.76 15.84 36.06 17.50 40.49 19.73 28.57 13.66 36.43 17.57 38.55 18.63 42.57 20.66 48.09 23.44
Venting Sq. Ft.

12.58 15.82 16.89 19.00 22.13 14.66 18.45 19.69 22.17 25.84 25.73 12.28 32.38 15.60 34.43 16.63 38.48 18.65 44.37 21.60 30.08 14.36 37.80 18.22 40.22 19.43 44.99 21.81 51.96 25.30

14.49 17.85 18.95 21.13 24.36 16.81 20.71 21.99 24.53 28.30 28.07 28.07 34.97 34.97 37.09 37.09 41.27 41.27 47.36 47.36 32.65 32.65 40.64 40.64 43.12 43.12 48.02 55.20 55.20 48.02
*Passive panel in closed position. To complete door identification, add AEAHID (inswing) or AEAHOD (outswing) to "Door Number" listed in table (i.e. AEAHID2068 or AEAHOD4068PA). "Door Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See page 33 for more details.
Direct Set and Sash Glazed Arch Sidelights
AEASLDxx68
AEASLDxx80
AEASLIxx68 AEASLOxx68
AEASLIxx80 AEASLOxx80
Direct set arch sidelights (AEASLD) and sash glazed arch sidelights (AEASLI, inswing or AEASLO, outswing) shown. Contact your Andersen supplier for sash glazed sidelight dimensions and specifications.
207

Entranceway Heights

AEHIDxx68 AEHODxx68 AEHIDxx80 AEHODxx80 AEHIDxx68AP/PA AEHODxx68AP/PA AEHIDxx80AP/PA AEHODxx80AP/PA
Available in custom designed panels, see page 204. Stationary single (S) and stationary 2-panel (SS) doors are also available (i.e. AEHID2068S or AEHOD4068SS).
Inswing (AEHID) and Outswing (AEHOD) Entranceway Dimensions & Opening Specifications
2068 2668 2868 3068 3668 2080 2680 2880 3080 3680 4068AP/PA 4068AP/PA* 5068AP/PA 5068AP/PA* 5468AP/PA 5468AP/PA* 6068AP/PA 6068AP/PA* 7068AP/PA 7068AP/PA* 4080AP/PA 4080AP/PA* 5080AP/PA 5080AP/PA* 5480AP/PA 5480AP/PA* 6080AP/PA 6080AP/PA* 7080AP/PA 7080AP/PA*

26 3/16" 32 3/16" 34 3/16" 38 3/16" 44 3/16" 26 3/16" 32 3/16" 34 3/16" 38 3/16" 44 3/16" 51 1/4" 51 1/4" 63 1/4" 63 1/4" 67 1/4" 67 1/4" 75 1/4" 75 1/4" 87 1/4" 87 1/4" 51 1/4" 51 1/4" 63 1/4" 63 1/4" 67 1/4" 67 1/4" 75 1/4" 75 1/4" 87 1/4" 87 1/4"
Width Inches
25 11/16" 31 11/16" 33 11/16" 37 11/16" 43 11/16" 25 11/16" 31 11/16" 33 11/16" 37 11/16" 43 11/16" 50 3/4" 50 3/4" 62 3/4" 62 3/4" 66 3/4" 66 3/4" 74 3/4" 74 3/4" 86 3/4" 86 3/4" 50 3/4" 50 3/4" 62 3/4" 62 3/4" 66 3/4" 66 3/4" 74 3/4" 74 3/4" 86 3/4" 86 3/4"
Height Inches
82" 82" 82" 82" 82" 95" 95" 95" 95" 95" 82" 82" 82" 82" 82" 82" 82" 82" 82" 82" 95" 95" 95" 95" 95" 95" 95" 95" 95" 95"
Height Inches
82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2"
Inswing Clear Opening 90 Width Full Width Full Height Inches Inches Inches
20 13/16" 26 13/16" 28 13/16" 32 13/16" 38 13/16" 20 13/16" 26 13/16" 28 13/16" 32 13/16" 38 13/16" 43 13/16" 20 7/8" 55 13/16" 26 7/8" 59 13/16" 28 7/8" 67 13/16" 32 7/8" 79 13/16" 38 7/8" 43 13/16" 20 7/8" 55 13/16" 26 7/8" 59 13/16" 28 7/8" 67 13/16" 32 7/8" 79 13/16" 38 7/8" 22 7/8" 28 7/8" 30 7/8" 34 7/8" 40 7/8" 22 7/8" 28 7/8" 30 7/8" 34 7/8" 40 7/8" 47 15/16" 22 15/16" 59 15/16" 28 15/16" 63 15/16" 30 15/16" 71 15/16" 34 15/16" 83 15/16" 40 15/16" 47 15/16" 22 15/16" 59 15/16" 28 15/16" 63 15/16" 30 15/16" 71 15/16" 34 15/16" 83 15/16" 40 15/16" 79 1/16" 79 1/16" 79 1/16" 79 1/16" 79 1/16" 92 1/16" 92 1/16" 92 1/16" 92 1/16" 92 1/16" 79 1/16" 79 1/16" 79 1/16" 79 1/16" 79 1/16" 79 1/16" 79 1/16" 79 1/16" 79 1/16" 79 1/16" 92 1/16" 92 1/16" 92 1/16" 92 1/16" 92 1/16" 92 1/16" 92 1/16" 92 1/16" 92 1/16" 92 1/16"
Clear Opening Sq. Ft.

12.56 15.85 16.95 19.15 22.44 14.62 18.46 19.74 22.30 26.13 26.32 12.59 32.91 15.89 35.10 16.99 39.50 19.18 46.09 22.48 30.65 14.66 38.32 18.50 40.88 19.78 45.99 22.34 53.66 26.17
Venting Sq. Ft.

12.56 15.85 16.95 19.15 22.44 14.62 18.46 19.74 22.30 26.13 26.32 12.59 32.91 15.89 35.10 16.99 39.50 19.18 46.09 22.48 30.65 14.66 38.32 18.50 40.88 19.78 45.99 22.34 53.66 26.17
Outswing Clear Opening 90 Width Full Width Full Height Inches Inches Inches
21 1/8" 27 1/8" 29 1/8" 33 1/8" 39 1/8" 21 1/8" 27 1/8" 29 1/8" 33 1/8" 39 1/8" 44 3/16" 21" 56 3/16" 27" 60 3/16" 29" 68 3/16" 33" 80 3/16" 39" 44 3/16" 21" 56 3/16" 27" 60 3/16" 29" 68 3/16" 33" 80 3/16" 39" 23 1/16" 29 1/16" 31 1/16" 35 1/16" 41 1/16" 23 1/16" 29 1/16" 31 1/16" 35 1/16" 41 1/16" 48 1/8" 23" 60 1/8" 29" 64 1/8" 31" 72 1/8" 35" 84 1/8" 41" 48 1/8" 23" 60 1/8" 29" 64 1/8" 31" 72 1/8" 35" 84 1/8" 41" 79 3/16" 79 3/16" 79 3/16" 79 3/16" 79 3/16" 92 3/16" 92 3/16" 92 3/16" 92 3/16" 92 3/16" 79 3/16" 79 3/16" 79 3/16" 79 3/16" 79 3/16" 79 3/16" 79 3/16" 79 3/16" 79 3/16" 79 3/16" 92 3/16" 92 3/16" 92 3/16" 92 3/16" 92 3/16" 92 3/16" 92 3/16" 92 3/16" 92 3/16" 92 3/16"
Clear Opening Sq. Ft.

12.68 15.98 17.08 19.28 22.58 14.76 18.61 19.89 22.45 26.29 26.46 12.65 33.06 15.95 35.26 17.05 39.66 19.25 46.26 22.55 30.81 14.72 38.49 18.57 41.05 19.85 46.17 22.41 53.86 26.25
Venting Sq. Ft.

12.58 15.82 16.89 19.00 22.13 14.66 18.45 19.69 22.17 25.84 25.73 12.28 32.38 15.60 34.43 16.63 38.48 18.65 44.37 21.60 30.08 14.36 37.80 18.22 40.22 19.43 44.99 21.81 51.96 25.30

14.63 18.04 19.18 21.46 24.88 16.95 20.90 22.22 24.86 28.82 28.90 28.90 35.73 35.73 38.01 38.01 42.57 42.57 49.40 49.40 33.48 33.48 41.40 41.40 44.04 44.04 49.31 49.31 57.23 57.23
*Passive panel in closed position. To complete door identification, add AEHID (inswing) or AEHOD (outswing) to "Door Number" listed in table (i.e. AEHID2068 or AEHOD4068PA). "Door Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See page 33 for more details.
Direct Set and Sash Glazed Entranceway Sidelights
Direct Set Sidelight Dimensions & Window/Glass Area

Door Dimension Window Number
AESLD0868 AESLD1068 AESLD2068 AESLD3068 AESLD0880 AESLD1080 AESLD2080
Minimum Rough Opening Width Inches

10 7/16" 16 7/16" 26 3/16" 38 3/16" 10 7/16" 16 7/16" 26 3/16" 38 3/16"
Width Inches
9 15/16" 15 15/16" 25 11/16" 37 11/16" 9 15/16" 15 15/16" 25 11/16" 37 11/16"
Height Inches
82" 82" 82" 82" 95" 95" 95" 95"
Height Inches
82 1/2" 82 1/2" 82 1/2" 82 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2"
Glass Area Sq. Ft.

3.77 7.03 12.32 18.84 4.40 8.19 14.37 21.97
Overall Window Area Sq. Ft.

5.66 9.08 14.63 21.46 6.56 10.51 16.95 24.86
AESLDxx68
AESLDxx80
AESLIxx68 AESLOxx68
AESLIxx80 AESLOxx80
Direct set sidelights (AESLD) and sash glazed sidelights (AESLI, inswing or AESLO, outswing) shown. Contact your Andersen supplier for sash glazed sidelight dimensions and specifications.
AESLD3080
"Window Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See page 33 for more details.
208
Order Designation Description

Viewed from the exterior.
17
AEAHID 3168
17
AEAHID 3168
17
AEAHID 6480
Door Flanking unit rough opg. width Architectural Entranceway Arch Hinged Inswing Door
Door Flanking unit rough opg. width Architectural Entranceway Arch Hinged Inswing Door
Flanking unit Right Door Passive width hinged rough opg. panel Architectural Entranceway Left Active Arch Hinged Inswing Door hinged panel
Inswing arch entranceways (AEAHID) shown above, for outswing arch entranceways use AEAHOD. Outswing entranceways open outward to the exterior.
17
AEHID
3168
17
AEHID
3168
17
AEHID
6476
Door Flanking unit rough opg. width Architectural Entranceway Hinged Inswing Door
Door Flanking unit rough opg. width Architectural Entranceway Hinged Inswing Door
Flanking unit Right Door Passive width hinged rough opg. panel Architectural Entranceway Left Active Hinged Inswing Door hinged panel
Inswing entranceways (AEHID) shown above, for outswing entranceways use AEHOD. Outswing entranceways open outward to the exterior.
Arch and Rectangular Inswing Entranceway Details 4 9 16" and 6 9 16" Jamb Width
Scale 11 2" = 1'-0" (1:8)
1 5 16" 4 9 16" Jamb Width 1 5 16" 6 9 16" Jamb Width 1 5 16" 4 9 16" Jamb Width 1 5 16" 6 9 16" Jamb Width
7 5 16"
7 5 16"
11 11 16"
11 11 16"
1 1 2"
1 1 2"
Clad details shown, wood also available. 4 9/16" and 6 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with window and/or door. Dark-colored areas are additional Andersen parts required to complete window and/or door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
Vertical Section Arch
Vertical Section Rectangular
209

Arch and Rectanguar Inswing Entranceway Details 4 9 16" Jamb Width
Scale 11 2" = 1'-0" (1:8)
4 9 16" Jamb Width 1 5 16"
6 7 16"
3 8"

3 8"
1 5 16"
4 9 16" Jamb Width
6 7 16"
3 8"
6 7 16"
3 8"
Arch and Rectanguar Inswing Entranceway Details 6 9 16" Jamb Width

Scale 11 2" = 1'-0" (1:8)
1 5 16"
6 9 16" Jamb Width
6 7 16"
3 8"

3 8"
1 5 16"
6 9 16" Jamb Width
6 7 16"
3 8"
6 7 16"
3 8"
Clad details shown, wood also available. 4 9/16" and 6 9/16" jamb width measurements are from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
210
Arch and Rectangular Outswing Entranceway Details

Scale 11 2" = 1'-0" (1:8)
1 5 16" 4 9 16" Jamb Width 1 5 16" 4 9 16" Jamb Width
7 5 16"
11 15 16"
11 15 16"
7 5 16"
1 1 2"
1 1 2"
1 5 16"
4 9 16" Jamb Width
6 7 16"
3 8"

3 8"
6 7 16"
3 8"
6 7 16"
3 8"
Clad details shown, wood also available. 4 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
211
1 5 16"
4 9 16" Jamb Width

Arch and Rectangular Entranceway Sidelight Details
Scale 11 2" = 1'-0" (1:8)
1 5 16" 4 9 16" Jamb Width 1 5 16" 4 9 16" Jamb Width 1 1 4" 1 5 16" 4 9 16" Jamb Width 1 5 16" 4 9 16" Jamb Width
Unit Dimension Height 11 11 16"
7 5 16"
2 1 2" Vertical Section Arch - Direct Set Vertical Section Rectangular - Direct Set Vertical Section Arch - Sash Glazed Vertical Section Rectangular - Sash Glazed
Vertical Non-Reinforced Joining Details Scale 11 2" = 1'-0" (1:8)

1 5 8" (41) 1 5 8" (41)
1 5 8" (41) 1 5 8" (41)
1" and 2" wide joining also available. Contact your Andersen supplier
0" Direct Set Sidelight to Inswing Entranceway 4 9 16" Jamb Width Unit Dim. Unit Dim. Unit Dim. 0" Sash Glazed Sidelight to Inswing Entranceway 4 9 16" Jamb Width Unit Dim. 0" Sash Glazed Sidelight to Inswing Entranceway 6 9 16" Jamb Width 2 1 8" (54) 2 1 8" (54) 2 1 8" (54) 2 1 8" (54) Unit Dim. Unit Dim. 0" Sash Glazed Sidelight to Outswing Entranceway 4 9 16" Jamb Width Unit Dim. Unit Dim.
for additional joining informaion.
Unit Dim. Unit Dim. 1 2" (13) Direct Set Sidelight to Inswing Entranceway 4 9 16" Jamb Width
Unit Dim. Unit Dim. 1 2" (13) Sash Glazed Sidelight to Inswing Entranceway 4 9 16" Jamb Width
Unit Dim. Unit Dim. 1 2" (13) Sash Glazed Sidelight to Inswing Entranceway 6 9 16" Jamb Width 2 3 8" (60)
Unit Dim. Unit Dim. 1 2" (13) Sash Glazed Sidelight to Outswing Entranceway 4 9 16" Jamb Width
Vertical Reinforced Joining Details Scale 11 2" = 1'-0" (1:8)

2 3 8" (60) 2 3 8" (60)
2 3 8" (60)
Unit Dim. Unit Dim. 3 4" (19) Direct Set Sidelight to Inswing Entranceway 4 9 16" Jamb Width
Unit Dim. Unit Dim. 3 4" (19) Sash Glazed Sidelight to Outswing Entranceway 4 9 16" Jamb Width
Clad details shown, wood also available. 4 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings.
212
ARCHITECTURAL ENTRANCEWAY TRANSOMS
Features
FRAME
Transoms are sized to complement Andersen architectural doors and other Andersen products. They are also available in custom sizes. Contact your Andersen supplier for details. Available as direct glazed or with wide stiles to match door stiles. Thick aluminum cladding nish. Standard cladding nish meets AAMA 2604. An optional nish that meets the AAMA 2605 standard is available. 4 9/16" jamb width for 2 x 4 wall construction.
Archtop Direct Glazed Sash Glazed
Rectangle
Circle Top
SHAPES
Available in a wide variety of shapes including Circle Top, archtop, elliptical, Springline and rectangle windows. See page 215 for exterior colors, interior wood species, glass and other options.
Andersen architectural windows and doors may be combined with other units using either separate rough openings or non-reinforced joining methods. Contact your Andersen supplier for more information.
Direct Set Rectangle Entranceway Transom Dimensions & Window/Glass Area

AETD0812 AETD1012 AETD2012 AETD2612 AETD2812 AETD3012 AETD3612 AETD4012 AETD5012 AETD5412 AETD6012 AETD7012 AETD0817 AETD1017 AETD2017 AETD2617 AETD2817 AETD3017 AETD3617 AETD4017 AETD5017 AETD5417 AETD6017 AETD7017 AETD08111 AETD10111 AETD20111 AETD26111 AETD28111 AETD30111 AETD36111
Min. Rgh Ong Width Inches

10 7/16" 16 7/16" 26 3/16" 32 /16"
3
Direct Set Rectangle Entranceway Transom Dimensions & Window/Glass Area

0.88 1.42 2.29 2.82 3.00 3.35 3.89 4.52 5.58 5.94 6.65 7.72 1.23 1.97 3.18 3.92 4.17 4.66 5.40 6.28 7.76 8.26 9.25 10.73 1.51 2.41 3.89 4.80 5.10 5.71 6.62

AETD40111 AETD50111 AETD54111 AETD60111 AETD70111 AETD0827 AETD1027 AETD2027 AETD2627 AETD2827 AETD3027 AETD3627 AETD4027 AETD5027 AETD5427 AETD6027 AETD7027 AETD4029 AETD5029 AETD5429 AETD6029 AETD7029 AETD4041 AETD5041 AETD5441 AETD6041 AETD7041 AETD4051 AETD5051 AETD5451 AETD6051 AETD7051
Min. Rgh Ong Width Inches

51 1/4" 63 1/4" 67 1/4" 75 1/4" 87 /4"
1
Width Inches
9 15/16" 15 15/16" 25 11/16" 31 /16"
11
Height Inches
12 13/16" 12 13/16" 12 13/16" 12 /16"
13
Height Inches
13 5/16" 13 5/16" 13 5/16" 13 /16"
5
Glass Area Sq. Ft.

0.47 0.88 1.55 1.95 2.09 2.36 2.77 3.25 4.07 4.34 4.89 5.71 0.71 1.33 2.33 2.95 3.16 3.57 4.19 4.91 6.15 6.56 7.38 8.61 0.91 1.69 2.96 3.75 4.01 4.53 5.32
Width Inches
50 3/4" 62 3/4" 66 3/4" 74 3/4" 86 /4"
3
Height Inches
21 13/16" 21 13/16" 21 13/16" 21 13/16" 21 /16"
13
Height Inches
22 5/16" 22 5/16" 22 5/16" 22 5/16" 22 /16"
5
Glass Area Sq. Ft.

6.24 7.81 8.33 9.37 10.94 2.43 2.43 4.25 5.38 5.75 6.50 7.63 8.95 11.20 11.95 13.45 15.70 9.62 12.03 12.84 14.45 16.87 14.92 18.67 19.92 22.42 26.17 18.90 23.65 25.23 28.40 33.15

7.69 9.51 10.11 11.32 13.14 3.32 3.32 5.35 6.60 7.02 7.85
Custom-size windows are available in 1 8" increments. For dimensions and specifications for additional direct set and sash glazed transoms, contact your Andersen supplier.
33 11/16" 37 11/16" 43 11/16" 50 3/4" 62 /4"

3
12 13/16" 12 13/16" 12 13/16" 12 13/16" 12 /16"

13
34 3/16" 38 3/16" 44 3/16" 51 1/4" 63 /4"

1
13 5/16" 13 5/16" 13 5/16" 13 5/16" 13 /16"

5
15 15/16" 15 15/16" 25 11/16" 31 11/16" 33 11/16" 37 11/16" 43 11/16" 50 /4"

3
30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 32" 32" 32" 32" 32" 48" 48" 48" 48" 48" 60" 60" 60" 60" 60"
16 7/16" 16 7/16" 26 3/16" 32 3/16" 34 3/16" 38 3/16" 44 3/16" 51 /4"

1
30 1/2" 30 1/2" 30 1/2" 30 1/2" 30 1/2" 30 1/2" 30 1/2" 30 /2"

1
66 3/4" 74 3/4" 86 3/4" 9 15/16" 15 15/16" 25 11/16" 31 11/16" 33 11/16" 37 /16"

11
12 13/16" 12 13/16" 12 13/16" 17 13/16" 17 13/16" 17 13/16" 17 13/16" 17 13/16" 17 /16"

13
67 1/4" 75 1/4" 87 1/4" 10 7/16" 16 7/16" 26 3/16" 32 3/16" 34 3/16" 38 /16"

3
13 5/16" 13 5/16" 13 5/16" 18 5/16" 18 5/16" 18 5/16" 18 5/16" 18 5/16" 18 /16"

5
10.57 13.07 13.91 15.57 18.07 11.28 13.94 14.83 16.61 19.28 16.92 20.92 22.25 24.92 28.92 21.15 26.15 27.81 31.15 36.15
62 3/4" 66 3/4" 74 /4"

3
63 1/4" 67 1/4" 75 /4"

1
30 1/2" 30 1/2" 30 /2"

1
AETD7029 Sash Glazed
86 3/4" 50 3/4" 62 3/4" 66 3/4" 74 /4"

3
87 1/4" 51 1/4" 63 1/4" 67 1/4" 75 /4"

1
30 1/2" 32 1/2" 32 1/2" 32 1/2" 32 /2"

1
43 11/16" 50 3/4" 62 3/4" 66 3/4" 74 3/4" 86 3/4" 9 15/16" 15 15/16" 25 11/16" 31 11/16" 33 11/16" 37 11/16" 43 /16"
11
17 13/16" 17 13/16" 17 13/16" 17 13/16" 17 13/16" 17 13/16" 21 13/16" 21 13/16" 21 13/16" 21 13/16" 21 13/16" 21 13/16" 21 /16"
13
44 3/16" 51 1/4" 63 1/4" 67 1/4" 75 1/4" 87 1/4" 10 7/16" 16 7/16" 26 3/16" 32 3/16" 34 3/16" 38 3/16" 44 /16"
3
18 5/16" 18 5/16" 18 5/16" 18 5/16" 18 5/16" 18 5/16" 22 5/16" 22 5/16" 22 5/16" 22 5/16" 22 5/16" 22 5/16" 22 /16"
5
AETI7029
86 3/4" 50 3/4" 62 /4"

3
87 1/4" 51 1/4" 63 /4"

1
32 1/2" 48 1/2" 48 /2"

1
AETI7029-2
66 3/4" 74 3/4" 86 3/4" 50 3/4" 62 3/4" 66 3/4" 74 /4"

3
67 1/4" 75 1/4" 87 1/4" 51 1/4" 63 1/4" 67 1/4" 75 /4"

1
48 1/2" 48 1/2" 48 1/2" 60 1/2" 60 1/2" 60 1/2" 60 /2"

1
Sash glazed transoms are available with a single or double sash. Available in all shapes for both residential and commercial entranceways.
"Window Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See page 33 for more details.
86 3/4"
87 1/4"
60 1/2"
213
Architectural Entranceways Transoms
9.10
Direct Set
ARCHITECTURAL ENTRANCEWAY TRANSOMS

Direct Set Entranceway Transom Details
Scale 11 2" = 1'-0" (1:8)
Curved Head
13 16" 11 16" 11 16"
Curved Head
11 16"
4 9 16" Jamb Width
5 7 8"
Interior Trim Stop
13 16"
13 16"
Jamb
1 4"
Unit Dimension Width Min. Rough Opening Width
Horizontal Section Direct Set
Vertical Section Direct Set Transom over Inswing Entranceway
Vertical Section Direct Set Transom over Outswing Entranceway
Sash Glazed Entranceway Transom Details

Scale 11 2" = 1'-0" (1:8)
Width Varies to Match Door or Sidelight Stile Below
4 9 16" Jamb Width
1 5 16"
4 9 16" Jamb Width

13 16"
1 5 16"
4 9 16" Jamb Width
5 7 8"
7 16"
3 3 16" Unobstructed Glass Height
3 3 16" Unobstructed Glass Height
3 3 16"
Min. Rough Opening Width Horizontal Section Sash Glazed for Inswing Entranceway
1 4"
Curved Head
Jamb
Curved Head
3 1 8"
7 16"
3 3 16" 0" Unit Dimension Height
3 3 16"
0" Unit Dimension Height
13 16"
Width Varies to Match Door or Sidelight Stile Below

4 9 16" Jamb Width
5 7 8"
Jamb
1 4"
Vertical Section Sash Glazed Transom over Inswing Entranceway Unit Dimension Width Min. Rough Opening Width
Vertical Section Sash Glazed Transom over Outswing Entranceway
Horizontal Section Sash Glazed for Outswing Entranceway
Transoms are available in both 4 9/16" and 6 9/16" jamb widths. Clad details shown, wood also available. 4 9/16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with window and/or door. Dark-colored areas are additional Andersen parts required to complete window and/or door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
214
ARCHITECTURAL COMMERCIAL OUTSWING ENTRY DOORS
Features
A C
Accessories
HARDWARE
Accepts standard commercial closer, panic bar, kick plate and hardware systems from most manufacturers. 4 3/4" intermediate rail can be added to facilitate mounting of exit hardware.
Sold Separately.
GRILLES
Andersen divided light, removable interior grilles and contoured Finelight grilles-between-the-glass are available.
ART GLASS
Decorative insulated art glass designs are available. Contact your Andersen supplier for details.
PATTERNED GLASS
SILL
D Low-prole thermally broken

D
3'-1 5/8" (956)
FRAME
A Standard commercial
entry sizes include 6'-10", 7'-1 5/16" and 7'-11" heights. Also available in custom sizes. Contact your Andersen supplier for details. Features a thick aluminum cladding that meets the AAMA 2604 standard. An optional nish that meets the AAMA 2605 standard is also available, as are wood exteriors. Interior extension jambs available in any width up to 11 1/2".
Complies with accessibility requirements for commercial and residential applications. See page 216 for details. Commercial grade ball bearing stainless steel hinges.
mill-nished aluminum sill is standard. Bronze anodized nish is also available. Innovative dam design adds protection against water inltration. The sill can be extended to the interior for various wall conditions.
GLASS
C High-Performance glass options include:

Low-E4 tempered glass Low-E4 SmartSun tempered glass Low-E4 Sun tempered glass Additional glass options are available. Contact your Andersen supplier. (Glass option must be specied.)
PANEL
B Standard offering is a 10"

bottom rail with 7 1/2" top rail to conceal closure hardware. Optional 12" bottom rail and custom width stiles are also available. Contact your Andersen supplier for details.
Exterior
White Sandtone
Interior
Terratone
pine
oak
maple
alder
birch bark
Terra Cotta
Cocoa Bean Dark Ivy
Canvas
River Rock
Driftwood
Coral Green
Red Rock

cherry
douglas fir
mahogany*
white
primed white
Grilles are available to match the doors interior and exterior. Naturally occurring variations in grain, color and texture make each entry door and transom one-of-a-kind. * Actual wood is Sapele, also known as African mahogany, a non-endangered hardwood with color and characteristics similar to American mahoganies.
215
Architectural Entranceways Commercial Outswing Entry Doors
For more information about glass, patterned glass, grilles and installation accessories, contact your Andersen supplier.

Table of Commercial Outswing Entry Door and Sidelight Sizes
Scale 1 8" = 1'-0" (1:96)
Door Dimension 1'-3 7 8" 2'-1 5 8" 2'-7 5 8" 2'-9 5 8" 6'-2 3 4" 3'-9 7 8" 3'-1 5 8"
6'-10"
Custom-size doors are available in 1 8" increments. Standard sizes are shown.
7'-1 5 16"
Available in both 10" and 12" bottom rail heights. For additional stile widths and additional options contact your Andersen supplier. For available rectangular, archtop or
7'-11"
Circle Top transoms see pages 213-214.
Accessible Door Regulations

Residential - Federal Fair Housing Act
Fair Housing Act references ANSI standard #A117 for doors. ANSI A117.1 Basic Requirements 1. Maximum height threshold = 1 2" 2. Clear opening width with slab in 90 open position = 2'-8" 3. Clear opening height = 6'-8" 4. Minimum bottom rail height = 10"
Commercial - Federal
Federal 1. Maximum height threshold = 1 2" 2. Clear opening width with slab in 90 open position = 2'-8" 3. Clear opening height = 6'-8" 4. Minimum bottom rail height = 10"
Check local building codes. See page 218 for threshold and bottom rail details.
216
Entry Door Heights
ACDxx68
ACDxx70
ACDxx80
ACDxx68AP/PA
ACDxx70AP/PA
ACDxx80AP/PA
ACSLDxx68 (left) ACSLOxx68 (right)
Commercial Outswing Entry Door Dimensions & Opening Specifications

Door Dimensions Door Number
ACD3068 ACD3668 ACD3868 ACD3070 ACD3670 ACD3870 ACD3080 ACD3680 ACD3880 ACD4068AP/PA ACD4068AP/PA* ACD5068AP/PA ACD5068AP/PA* ACD5468AP/PA ACD5468AP/PA* ACD6068AP/PA ACD6068AP/PA* ACD4070AP/PA ACD4070AP/PA* ACD5070AP/PA ACD5070AP/PA* ACD5470AP/PA ACD5470AP/PA* ACD6070AP/PA ACD6070AP/PA* ACD4080AP/PA ACD4080AP/PA* ACD5080AP/PA ACD5080AP/PA* ACD5480AP/PA ACD5480AP/PA* ACD6080AP/PA ACD6080AP/PA*

38 3/16" 44 3/16" 46 7/16" 38 3/16" 44 3/16" 46 7/16" 38 /16"
3
Width Inches
37 11/16" 43 11/16" 45 15/16" 37 11/16" 43 11/16" 45 15/16" 37 /16"
11
Height Inches
82" 82" 82" 85 5/16" 85 5/16" 85 5/16" 95" 95" 95" 82" 82" 82" 82" 82" 82" 82" 82" 85 5/16" 85 5/16" 85 5/16" 85 5/16" 85 /16"
5
Height Inches
82 1/2" 82 1/2" 82 1/2" 85 13/16" 85 13/16" 85 13/16" 95 /2"
1
Clear Opgn 90 Width Inches

33 1/8" 39 1/8" 41 3/8" 33 1/8" 39 1/8" 41 3/8" 33 /8"
1
Outswing Clear Opgn Clear Opgn Full Width Full Height Inches Inches
35 1/16" 41 1/16" 43 5/16" 35 1/16" 41 1/16" 43 5/16" 35 /16"
1
Venting Sq.Ft.
19.45 22.78 24.02 20.26 23.72 25.02 22.61 26.48 27.94 26.69 12.76 33.35 16.09 35.57 17.20 40.01 19.41 27.80 13.29 34.73 16.75 37.04 17.91 41.67 20.22 31.04 14.83 38.78 18.70 41.36 19.99 46.52 22.57
Glass Area Sq.Ft.

10.60 13.15 14.11 11.17 13.86 14.87 12.84 15.94 17.10 12.46 12.46 16.08 16.08 17.79 17.79 21.20 21.20 13.13 13.13 16.95 16.95 18.75 18.75 22.34 22.34 15.10 15.10 19.49 19.49 21.56 21.56 25.69 25.69
Clear Opening Sq.Ft.

19.45 22.78 24.02 20.26 23.72 25.02 22.61 26.48 27.94 26.69 12.76 33.35 16.09 35.57 17.20 40.01 19.41 27.80 13.29 34.73 16.75 37.04 17.91 41.67 20.22 31.04 14.83 38.78 18.70 41.36 19.99 46.52 22.57
Overall Door Area Sq.Ft.

21.46 24.88 26.16 22.33 25.88 27.22 24.86 28.82 30.31 28.90 28.90 35.73 35.73 38.01 38.01 42.57 42.57 30.07 30.07 37.18 37.18 39.55 39.55 44.29 44.29 33.48 33.48 41.40 41.40 44.04 44.04 49.31 49.31 *Passive panel in closed position. "Door Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See page 33 for more details.
79 7/8" 79 7/8" 79 7/8" 83 3/16" 83 3/16" 83 3/16" 92 /8"

7
Custom-size doors are available in 1 8" increments. Available in custom designed panels, see page 204. Direct set ACSLD and sash glazed ACSLO sidelights are shown above. Stationary single (S) and 2-panel (SS) entranceways are also available (i.e. ACD3068S or ACD4068SS).
43 11/16" 45 15/16" 50 3/4" 50 3/4" 62 /4"

3
44 3/16" 46 7/16" 51 1/4" 51 1/4" 63 /4"

1
95 1/2" 95 1/2" 82 1/2" 82 1/2" 82 /2"

1
39 1/8" 41 3/8" 44 3/16" 21" 56 /16"

3
41 1/16" 43 5/16" 48 1/8" 23" 60 /8"

1
92 7/8" 92 7/8" 79 7/8" 79 7/8" 79 /8"

7
62 3/4" 66 3/4" 66 3/4" 74 3/4" 74 /4"

3
63 1/4" 67 1/4" 67 1/4" 75 1/4" 75 /4"

1
82 1/2" 82 1/2" 82 1/2" 82 1/2" 82 /2"

1
27" 60 3/16" 29" 68 3/16" 33" 44 3/16" 21" 56 3/16" 27" 60 /16"
3
29" 64 1/8" 31" 72 1/8" 35" 48 1/8" 23" 60 1/8" 29" 64 /8"
1
79 7/8" 79 7/8" 79 7/8" 79 7/8" 79 /8"

7
50 3/4" 50 3/4" 62 3/4" 62 3/4" 66 /4"

3
51 1/4" 51 1/4" 63 1/4" 63 1/4" 67 /4"

1
85 13/16" 85 13/16" 85 13/16" 85 13/16" 85 /16"

13
83 3/16" 83 3/16" 83 3/16" 83 3/16" 83 /16"

3
66 3/4" 74 3/4" 74 3/4" 50 3/4" 50 3/4" 62 3/4" 62 3/4" 66 3/4" 66 3/4" 74 3/4" 74 3/4"
85 5/16" 85 5/16" 85 5/16" 95" 95" 95" 95" 95" 95" 95" 95"
67 1/4" 75 1/4" 75 1/4" 51 1/4" 51 1/4" 63 1/4" 63 1/4" 67 1/4" 67 1/4" 75 1/4" 75 1/4"
85 13/16" 85 13/16" 85 13/16" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2" 95 1/2"
29" 68 3/16" 33" 44 3/16" 21" 56 3/16" 27" 60 3/16" 29" 68 3/16" 33"
31" 72 1/8" 35" 48 1/8" 23" 60 1/8" 29" 64 1/8" 31" 72 1/8" 35"
83 3/16" 83 3/16" 83 3/16" 92 7/8" 92 7/8" 92 7/8" 92 7/8" 92 7/8" 92 7/8" 92 7/8" 92 7/8"
Direct Set Entry Door Sidelight Window/Glass Area

ACSLD0868 ACSLD1068 ACSLD2068 ACSLD3068 ACSLD0870 ACSLD1070 ACSLD2070 ACSLD3070 ACSLD0880 ACSLD1080 ACSLD2080 ACSLD3080
Sash Glazed Entry Door Sidelight Window/Glass Area

5.66 9.08 14.63 21.46 5.89 9.44 15.22 22.33 6.56 10.51 16.95 24.86

10 7/16" 16 7/16" 26 3/16" 38 3/16" 10 7/16" 16 7/16" 26 3/16" 38 3/16" 10 7/16" 16 7/16" 26 3/16" 38 3/16"

ACSLO1068 ACSLO2068 ACSLO2668 ACSLO2868 ACSLO1070 ACSLO2070 ACSLO2670 ACSLO2870 ACSLO1080 ACSLO2080 ACSLO2680 ACSLO2880

16 7/16" 26 3/16" 32 3/16" 34 3/16" 16 7/16" 26 3/16" 32 3/16" 34 3/16" 16 7/16" 26 3/16" 32 3/16" 34 3/16"
Width Inches
9 15/16" 15 15/16" 25 11/16" 37 11/16" 9 15/16" 15 15/16" 25 11/16" 37 11/16" 9 15/16" 15 15/16" 25 11/16" 37 11/16"
Height Inches
82" 82" 82" 82" 85 5/16" 85 5/16" 85 5/16" 85 5/16" 95" 95" 95" 95"
Height Inches
82 1/2" 82 1/2" 82 1/2" 82 1/2" 85 13/16" 85 13/16" 85 13/16" 85 13/16" 95 1/2" 95 1/2" 95 1/2" 95 1/2"
Glass Area Sq. Ft.

3.77 7.03 12.32 18.84 3.93 7.32 12.84 19.63 4.40 8.19 14.37 21.97
Width Inches
15 15/16" 25 11/16" 31 11/16" 33 11/16" 15 15/16" 25 11/16" 31 11/16" 33 11/16" 15 15/16" 25 11/16" 31 11/16" 33 11/16"
Height Inches
82" 82" 82" 82" 85 5/16" 85 5/16" 85 5/16" 85 5/16" 95" 95" 95" 95"
Height Inches
82 1/2" 82 1/2" 82 1/2" 82 1/2" 85 13/16" 85 13/16" 85 13/16" 85 13/16" 95 1/2" 95 1/2" 95 1/2" 95 1/2"
Glass Area Sq. Ft.

3.41 7.56 8.79 9.21 3.59 7.97 9.26 9.71 4.13 9.16 10.65 11.17

9.08 14.63 18.04 19.18 9.44 15.22 18.77 19.96 10.51 16.95 20.90 22.22
217
Architectural Entranceways Commercial Outswing Entry Doors

Arch and Rectangular Commercial Outswing Entry Door Details
Scale 11 2" = 1'-0" (1:8)
Commercial Entry Door Sidelight Details

Scale 11 2" = 1'-0" (1:8)
1 5 16" 4 9 16" Jamb Width
1 5 16"
1 5 16"
1 5 16"
9 3 16"
9 3 16"
11 1 2"
11 1 2"
9 3 16"
7 16"
7 16"
1 1 8"
Vertical Section Arch Sidelight (Stationary)
1 5 16"
4 9 16" Jamb Width
1 5 16"
4 9 16" Jamb Width
1 5 16" 6 7 16"
3 8"
6 7 16"
3 8"
Rough Opening Width
1 5 16"
Horizontal Section Arch and Rectangular 4 9 16" Jamb Width
6 7 16"
3 8"
12 1 4" Unit Dimension Width Rough Opening Width
6 7 16"
3 8"
9 3 16"
Horizontal Section Arch and Rectangular, 2-Panel
1 1 8"
Clad details shown, wood also available. Rectangular Sidelight (Stationary) 4 9/16" jamb width measurements are from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to unit installation guides at andersenwindow.com.
Vertical Section
218

Casement Windows

Uploaded by

Copyright:

Available Formats

Casement Windows

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Casement Windows

Uploaded by

Copyright:

Available Formats

400 SERIES 2 00 SERIES ARCHITECTURAL

2011-12 PRODUCT GUIDE

Architectural Casement Windows

ARCHITECTURAL CASEMENT WINDOWS Features

Low-E4 SmartSun glass Low-E4 Sun glass

C Interior stops are unnished.

D Wood core members provide

G Silicone glazing bead

Other species also available.

Forest Green Prairie Grass Dark Chestnut Black

Custom colors available.

Cocoa Bean Dark Ivy

Dark Bronze Midnight Blue

Folding handles avoid interference with window treatments.

Classic Series Hardware

SPECIAL USE OPERATORS

Architectural Casement Windows

ARCHITECTURAL CASEMENT WINDOWS

Rectangle Casement Window

Trapezoid Casement Window*

Single Archtop Casement Window*

CUSTOM WIDTHS 7'-0" CUSTOM HEIGHTS

Unequal Leg Arch Casement Window

Twin Archtop Casement Window*

Triple Archtop Casement Window*

CUSTOM WIDTHS 7' 0" 7'-0" CUSTOM HEIGHTS CUSTOM HEIGHTS

CUSTOM WIDTHS 7'-0" CUSTOM HEIGHTS

Springline Casement Window*

Springline Flanker Casement Window*

Twin Springline Casement Window*

CUSTOM WIDTHS 7'-0" CUSTOM HEIGHTS CUSTOM HEIGHTS

CUSTOM WIDTHS 7'-0" CUSTOM HEIGHTS

Springline French Casement Window*

Rectangular French Casement Window

Archtop French Casement Window

Scale 11 2" = 1'-0" (1:8)

Head - Curved Top

Minimum Rough Opening Height

Extension Jambs Insect Screen

1 1 8" (29) 4 9 16" (116) Jamb Width

Unit Dimension Height

Unobstructed Glass Height

1 7 16" (37) 1 1 8" (29)

Unobstructed Glass Width Unit Dimension Width

Minimum Rough Opening Width

Clad Casement Springline Window Details

Minimum Rough Opening Height

Extension Jambs Insect Screen

1 1 8" (29) 4 9 16" (116) Jamb Width

Unit Dimension Height

Unobstructed Glass Height

Extension Jambs Head Insect Screen

1 7 16" (37) 1 1 8" (29)

Unobstructed Glass Width Unit Dimension Width

Minimum Rough Opening Width Horizontal Section

(6) Sill Vertical Section

Architectural Casement Windows

Clad Casement Window Details

ARCHITECTURAL CASEMENT WINDOWS

1 1 8" (29) 1 1 8" (29)