Celerra Useful Cmd's

Useful Celerra Commands http://emcsan.wordpress.com/2011/06/03/useful-celerra-commands/ Here is a list of Celerra commands I keep at my desk for reference.
(Updated 4/25/2012) NAS Specific Commands: Nas_disk -list Lists the disk table Nas_checkup Runs a system health check. Nas_pool -size -all Lists available space on each defined storage pool Nas_replicate -info all | grep <fs> Info about each filesystems replication stat us, grep to view just one. Nas_replicate -list A list of all current replications Nas_server -list Lists all datamovers. 1=primary,4=standby,6=rdf (remote da ta facility) <watch> /nas/sbin/getreason Shows current status of each datamover. 5=up, 0=do wn or rebooting Nas_fs Creates, deletes, extends, modifies, and lists filesystems. Nas_config Control station configuration (requires root login) Nas_version View current nas revision Nas_ckpt_schedule Manage checkpoint schedule Server specific commands: Server_cpu server_<x> -r now Reboots a datamover Server_ping <IP> ping any IP from the control station Server_ifconfig server_2 all View all configured interfaces Server_route server_2 {-list,flush,add,delete} Routing table commands Server_mount Mount a filesystem Server_export Export a filesystem Server_stats Provides realtime stats for a datamover, many different options . Server_sysconfig Modifies hardware config of the data movers. Server_devconfig Configures devices on the data movers. Server_sysstat Shows current Memory, CPU, and thread utilization Server_log server_2 Shows current log vi /nas/jserver/logs/system_log Java System log vi /var/log/messages System Messages server_ifconfig server_2 <interface_name> up Bring up a specific interface server_ifconfig server_2 <interface_name> down Take a specific interface down server_date Sets system time and NTP server settings server_file FTP equivalent command server_dns Configure DNS server_cifssupport Support services for CIFS users To view HBA Statistics: .server_config server_2 -v printstats fcp reset Toggles the service on/off .server_config server_2 -v printstats fcp full View the stats table (must wait a while for some stats to collect before viewing) To Join/Unjoin a CIFS Server from the domain: server_cifs server_2 -Join compname=SERVERNAME,domain=DOMAIN.COM,admin=ADMINID server_cifs server_2 -Unjoin compname=SERVERNAME,domain=DOMAIN.COM,admin=ADMINID To view the current domain controllers visible on the data mover: .server_config server_2 -v pdc dump
To enable or disable a domain controller on the data mover: ..server_config server_2 -v pdc enable=<ip_address> Enable a domain controller ..server_config server_2 -v pdc disable=<ip_address> Disable a domain controller To stop and start the CIFS service: server_setup server_2 -P cifs -o stop Stop CIFS Service server_setup server_2 -P cifs -o start Start CIFS Service To stop, start or check the status of the iSCSI service: server_iscsi server_2 -service -start Start iSCSI service server_iscsi server_2 -service -stop Stop iSCSI service server_iscsi server_2 -service -status Check the status of the iSCSI service To enable/disable NDMP Logging: Turn it on: .server_config server_x logsys .server_config server_x logsys Turn it off: .server_config server_x logsys .server_config server_x logsys
set severity NDMP=LOG_DBG2 set severity PAX=LOG_DBG2 set severity NDMP=LOG_ERR set severity PAX=LOG_ERR
For gathering performance statistics: server_netstat server_x -i Interface statistics server_sysconfig server_x -v Lists virtual devices server_sysconfig server_x -v -i vdevice_name Informational stats on the virtual device server_netstat server_x -s -a tcp Retransmissions server_nfsstat server_x NFS SRTs server_nfsstat server_x -zero Reset NFS stats Filesystem specific commands: Fs_ckpt Fs_dhsm Fs_group Manage Checkpoints Manage File Mover Manage filesystem groups
Complete List of nas_ Commands: This is just for reference, you can easily pull up this list from a Celerra by t yping nas_ and hitting the tab key. nas_acl nas_ckpt_schedule nas_dbtable nas_emailuser nas_inventory nas_pool nas_slice nas_task nas_automountmap nas_cmd nas_devicegroup nas_event nas_license nas_quotas nas_stats nas_version nas_cel nas_copy nas_disk
nas_fs nas_logviewer nas_replicate nas_storage nas_volume nas_checkup nas_cs nas_diskmark nas_fsck nas_message nas_server nas_symm nas_xml Complete list of server_ Commands: This is just for reference, you can easily pull up this list from a Celerra by t yping server_ and hitting the tab key. server_archive server_cifssupport server_file server_log server_name server_ping6 server_sysconfig server_vtlu server_arp server_cpu server_ftp server_mgr server_netstat server_rip server_sysstat server_cdms server_date server_http server_mount server_nfs server_route server_tftp server_cepp server_dbms server_ifconfig server_mountpoint server_nfsstat server_security server_umount server_certificate server_devconfig server_ip server_mpfs server_nis server_setup server_uptime server_checkup server_df server_iscsi server_mpfsstat server_param
server_snmpd server_usermapper server_cifs server_dns server_kerberos server_mt server_pax server_standby server_version server_cifsstat server_export server_ldap server_muxconfig server_ping server_stats server_viruschk Complete list of fs_ Commands: This is just for reference, you can easily pull up this list from a Celerra by t yping fs_ and hitting the tab key. fs_ckpt fs_dedupe fs_dhsm fs_group fs_rdf fs_timefinde

Celerra Useful Cmd's

Uploaded by

Copyright:

Available Formats

Celerra Useful Cmd's

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Celerra Useful Cmd's

Uploaded by

Copyright:

Available Formats

Useful Celerra Commands http://emcsan.wordpress.com/2011/06/03/useful-celerra-commands/ Here is a list of Celerra commands I keep at my desk for reference.

You might also like