IBM 000-565 Exam Topic 1, Volume A QUESTION NO: 1 A customer wants to add some logic around specific IBM

Tivoli Network Manager IP Edition V3.9 poller generated events. Where would an administrator put this logic? A. add an exception filter clause to the ncmonitor.noEvent table B. modify the nco_p_ncpmonitor rules file to include the required logic C. modify the ncp_poller event generation ruleset to prevent the events from being sent D. change the EventGatewaySchema.cfg configuration file to prevent the events from reaching the ObjectServer Answer: B Explanation:

QUESTION NO: 2 What does this entry do in the DiscoCollectorFinderSeeds.DOMAIN.cfg in IBM Tivoli Network Manager IP Edition V3.9 (ITNM)? insert into collectorFinder.collectorRules ( m_Host, m_Port, m_NumRetries ) values ( "172.16.25.1", 8082, 5 ) ; A. The collector agent running on the ITNM server connects to the EMS running on port 8082 to collect its data. B. The collector agent running on the ITNM server connects to the collector running on port 8082 to collect its data. C. The collector agent running on 172 16 25 1 connects locally to the collector running on port 8082 to collect its data. D. The collector agent running on the ITNM server connects to the collector running on 172.16.25 1 port 8082 to collect its data. Answer: D Explanation:

QUESTION NO: 3 How can discovery be configured to run at 7:00 p.m. every night?

"Pass Any Exam. Any Time." - 100% Pass Guarantee

IBM 000-565 Exam A. run the script $PRECI`SION_HOME/scripts/perl/scripts/ncp_autodiscovery.pl 1900 B. edit the SPRECISIONJHOMBdisco/stitchers/FullDiscovery.stch file and add in the line within the StitcherTrigger section: ActOnDemand(( m_TimeOfDay) values (1900);); C. edit the $PRECISION_HOME/disco/stitchers/FullDiscovery.stch file and add in the line within the StitcherTrigger section: ActOnTimedTrigger(( m_TimeOfDay) values (1900);); D. edit the $PRECISION_HOME/disco/stitchers/FullDiscovery stch stitcher and add in the line within the StitcherRules section: ActOnDemand(( m_TimeOfDay) values (1900);); Answer: C Explanation:

QUESTION NO: 4 Which restriction is in place when using a silent install mode? A. The installation process cannot be canceled at any time B. The silent install file cannot be edited after it has been created. C. The silent install file cannot be moved between hosts and then reused. D. The silent install mode is only suitable for a default standard installation Answer: A Explanation:

QUESTION NO: 5 A company wants to create a new drop-down list that an operator can use when creating new dynamic network views. The list will hold the customerName and customerLocation information. This information was collected during the discovery phase and added to the model. The administrator has already extended the NCIM database with a new table called Customer which has two fields: customerName and customerLocation. The model has been configured to populate this new table. Which additional step does the administrator need to take to display the new table in the dropdown list? A. add this table to the appropriate section in the topoviz.properties B. modify the ncimMetaDataxml file by adding the appropriate table and data fields C. modify the DBEntityDetails.cfg file by specifying a new drop-down list and the name of the table created in the NCIM database D. no additional step is required as the network view configuration automatically has access to all "Pass Any Exam. Any Time." - 100% Pass Guarantee 3

IBM 000-565 Exam of the tables in the NCIM database and will create a drop-down list for each and every table Answer: B Explanation:

QUESTION NO: 6 The IBM Tivoli Network Manager IP Edition V3.9 administrator received a request to create a new domain with a default set of configuration files and poll policies. A Dbl_ogins.DOMAIN.cfg file has already been created with the appropriate access details. Which action must be taken? A. rundomain_create.pl -domain <DOMAIN> B. rundomain_create.pl -domain <DOMAIN> -default C. manually insert the domain details into the ncim.domainMgr table D. start the ncp_ctrl process for the new domain name - defaults will be applied Answer: A Explanation:

QUESTION NO: 7 How should an administrator deploy IBM Tivoli Network Manager IP Edition V3.9 using a command line installation on a Windows system? A. console_install.exe B. launchpad_console.exe C. launchpad.exe -console D. install.exe -i console Answer: D Explanation:

QUESTION NO: 8 If NCIM replication is enabled, which statement is true? A. Only IBM DB2 can be used for NCIM replication. B. Two NCIM databases exist, one in the primary domain and one in the backup domain. "Pass Any Exam. Any Time." - 100% Pass Guarantee 4

IBM 000-565 Exam C. IBM Tivoli Network Manager IP Edition V3.9 (ITNM) must connect to a pair of virtual ObjectServers. D. There will only be one ncp_g_event running for all of ITNM. Answer: B Explanation:

QUESTION NO: 9 By default, which three fields are used by the event gateway to link an event to a topology entity? (Choose three.) A. @Node B. @Class C. @bEventld D. @Identifier E. @LocalPriObj F. @LocalNodeAlias Answer: C,E,F Explanation:

QUESTION NO: 10 Which two statements are true about installing IBM Tivoli Network Manager IP Edition V3.9 (ITNMJ on a Solaris platform? {Choose two.) A. The ITNM destination directory must be owned as root. B. If ITNM is installed as a non-root user, all future Tivoli products must be installed as the same user. C. The setup_setuid_as_root.sh script must be run as root if ITNM is installed and will run as nonroot. D. The setup_setuid_as_root.sh script must be run as non-root if ITNM is installed and will run as non-root. E. Multiple ITNM installations on the same server can be installed with both the root account and a non-root account. Answer: B,C Explanation:

"Pass Any Exam. Any Time." - 100% Pass Guarantee

IBM 000-565 Exam QUESTION NO: 11 In IBM Tivoli Network Manager IP Edition V3.9 given a requirement to discover a new node but not place it in the topology correctly, which two tasks must be performed when doing partial rediscovery? (Choose two.) A. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery Rebuild Layers is checked B. ensure the necessary agents are enabled under Network Discovery Configuration > Partial Rediscovery Agents tab C. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery Rebuild Layers is unchecked D. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery of Related Devices is checked E. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery of Related Devices is unchecked Answer: B,C Explanation:

QUESTION NO: 12 Which file contains the SNMP community strings and settings for an IBM Tivoli Network Manager IP Edition V3.9 (ITNM) domain named ITNM NCP? A. CtrlServices.ITNM_NCP.cfg B. SnmpStackSchema.ITNM_NCP.cfg C. SnmpStackSecuritylnfo.ITNM_NCP.cfg D. DiscoSnmpHelperSchema.ITNM_NCP.cfg Answer: C Explanation:

QUESTION NO: 13 What is the primary issue with installing IBM Tivoli Network Manager IP Edition V3.9 (ITNM) as a root user on a single UNIX system in combination with other Tivoli products? A. The system will not run properly as a root user. B. ITNM might not be compatible with other Tivoli products. C. There are no issues related to installing as root on a UNIX system. "Pass Any Exam. Any Time." - 100% Pass Guarantee 6

IBM 000-565 Exam D. There are extra post-installation configuration steps to complete in order to run the core components as the root user. Answer: B Explanation:

QUESTION NO: 14 Which scenario is suitable for using default adaptive polls? A. rapid confirmation that the poll is active B. rapid confirmation that a device is down C. rapid confirmation of a threshold resolution D. rapid confirmation that a device is functioning Answer: B Explanation:

QUESTION NO: 15 During a deployment, a customer has identified location data that they would like added to both chassis and interface events from active (IBM Tivoli Network Manager IP Edition V3.9 (ITNM)) and passive (traps, syslog etc.) event sources. This data has been successfully imported into the Discovery process using supported stitching techniques and appears in the topology as three custom Extralnfo fields (see below). Ncpjnode1 has been configured to transfer this location data to a custom extended NCIM database table named locations (see exhibit below). This data is only held on EntityType 1 (chassis entities) to reduce the NCIM load. The customer has identified three ObjectServer fields that they would like this data :o be added to for all suitable events -NmosGeography, NmosCountry, and NmosSite

"Pass Any Exam. Any Time." - 100% Pass Guarantee

IBM 000-565 Exam

Example record in Model Description of the ncim.locations table

The ModelNcimDb cofiguration has been modified to map:

Based on the scenario, what is the correct stitcher method to populate a record with Extralnfo > m_Geogrpahy location data and then update the NmosGeography ObjectServer field? "Pass Any Exam. Any Time." - 100% Pass Guarantee 8

IBM 000-565 Exam Assume that a chassis and locationData Records have been defined and the mainNodeld is set to the Entityld of the chassis of the in scope event. Example: Record chassis; Record locationData. text geog-'. chassis = GwEntityData( mainNodeld); A. geog=@chassis.tocations.GEOGRAPHY; @locationData.NmosGeography = geog. GwEnrichEvent( locationData); B. geog=@chassis.Extralnfo.m_Geography; @locationData.NmosGeography = geog; GwEnrichEvent(locationData); C. NmosGeography = eval(text, '&8<Extralnfo->m_Geography'); GwEnrichEvent (NmosGeography); D. NmosGeogrpahy = @chassis.locations.GEOGRAPHY; @locationData.NmosGeography = eval(text, '$NmosGeography'); GwEnrichEvent (locationData); Answer: A Explanation:

QUESTION NO: 16 A customer wants to deploy IBM Tivoli Network Manager IP Edition V3.9 (ITNM) in their environment. They plan to discover and monitor specific various network devices and servers that are throughout their enterprise. The customer wants to ensure that they manage only a list of devices in their network with a specific naming convention. They currently keep track of these devices using a CSV file of IP addresses, hostnames and locations and have SNMP and ping access to these systems. Currently their DNS server and SysName naming conventions are not consistent. The customer also wants to ensure that they do not discover IP addresses outside the CSV list. Which discovery seeding method best suits their ITNM configuration? A. configure the Collector Finder by seeding the discovery and converting the CSV file to an XML file

"Pass Any Exam. Any Time." - 100% Pass Guarantee

IBM 000-565 Exam B. configure the Ping Finder by adding a list of subnets from the list of IP addresses using the CSV file C. configure the File Finder to point to the CSV file on the Network Manager server with a comma delimiter D. ensure Feedback is enabled and then configure the Ping Finder and the File Finder by adding a list of subnets using the CSV file Answer: C Explanation:

QUESTION NO: 17 The scope of the discovery contains the IBM Tivoli Network Manager IP Edition V3.9 (ITNM) server and the gateway trace file shows that this is being used successfully as the correct NcpServerEntity. However, the isolated suppression method is not working. What would cause this? A. The ITNM server is not being directly polled for status. B. The ITNM server is not connected to the rest of the topology. C. There was no SNMP access to the ITNM server so the IP address is not known. D. The Root Cause Analysis plug-in has not been explicitly configured to use the ITNM server. Answer: B Explanation:

QUESTION NO: 18 A custom event has been added requiring the creation of a new EventMap. How is this EventMap associated with the RCA plug-in? A. register the EventMap with the RCA plug-in using the ncp_gwplugins.pl script B. ensure that the Eventld is mapped to the EventMap in the NcoGatelnserts.cfg file C. edit the EventGatewaySchema.cfg and include the EventMap in the ncp2nco section D. no action needed - any EventMap in the EventGatewaySchema.cfg file will be passed to the RCA plug-in by default Answer: A Explanation:

"Pass Any Exam. Any Time." - 100% Pass Guarantee

10

IBM 000-565 Exam QUESTION NO: 19 In IBM Tivoli Network Manager IP Edition V3.9 what leads to Fatal messages in the message level log of a ncp process? A. process is hung B. process is terminated C. process has not started D. process is running with errors Answer: B Explanation:

QUESTION NO: 20 Aside from the number of devices being discovered, what is the most important information to gather when determining the number of needed domains? A. number of polling engines B. number of users that will use the portal C. average number of interfaces per device D. number of active poll definitions and intervals Answer: C Explanation:

QUESTION NO: 21 When adding INSERT lines in the PresetLayer.stch file to add in new entities, interfaces, and connections, which three IBM Tivoli Network Manager IP Edition V3.9 OQL tables are being updated directly from this stitcher? (Choose three.) A. workingEntibes.finalEntity B. translations.ipToBaseName C. workingEntities.containment D. fullTopology.entityByNeighbor E. PresetLayer.entityByNeighbor F. scatchTopology.entityByName Answer: A,C,E

"Pass Any Exam. Any Time." - 100% Pass Guarantee

11

IBM 000-565 Exam Explanation:

QUESTION NO: 22 Where is the MIB graph log located in IBM Tivoli Network Manager IP Edition V3.9? A. $lTNMHOME/logs/tnm B. $NCHOME/log/precision C. $TIPHOME/profiles TIPProfile/logs/tnm D. $ITNMHOME/profiles TIPProfile/logs/tnm Answer: D Explanation:

QUESTION NO: 23 Which OQL query determines the SNMP access status of seeded devices? A. select* from Details.returns; B. select* from Details despatch; C. select "from finders.processing; D. select" from translations.ipToBaseName; Answer: A Explanation:

QUESTION NO: 24 The IBM Tivoli Network Manager IP Edition V3.9 administrator is asked to create a network path view at a user's request. The user asks that both directions for network traffic are visualized. What does the administrator need to do? A. Nothing. This is performed automatically by the network path tool. B. Nothing. Network traffic has to flow the same way in both directions. C. Check Define All Paths in the Network Path Tool configuration screen. D. Check the Get Return Path field in the Network Path Tool configuration screen. Answer: D "Pass Any Exam. Any Time." - 100% Pass Guarantee 12

IBM 000-565 Exam Explanation:

QUESTION NO: 25 Which two Basic views can be used in filters for creating network views? (Choose two.) A. interfaces B. FilterView C. entityData D. Detailsreturns E. mainNodeDetails Answer: A,E Explanation:

QUESTION NO: 26 What is the installation directory restriction when integrating IBM Tivoli Network Manager IP Edition V3.9 with IBM Tivoli Business Service Manager? A. The directory must not contain spaces. B. The directory must not contain periods. C. The directory must not contain slashes. D. The directory must not contain mixed case. Answer: A Explanation:

QUESTION NO: 27 Which file must be modified to extend NCIM to include new data that has been included in the model for Extralnfo > City? A. $NCHOME/etc/precision/DbSchema.cfg B. $ITNMHOME/etc/precision/DbSchema.cfg C. $NCHOME/etc/precision/ModelSchema.cfg D. $NCHOME/etc/precision/DbEntityDetails.cfg

"Pass Any Exam. Any Time." - 100% Pass Guarantee

13

IBM 000-565 Exam Answer: D Explanation:

QUESTION NO: 28 Which statement is true about the post-installation configuration of IBM Tivoli Network Manager IP Edition V3.9 as a non-root user on an AIX platform? A. install the AIX Security Kit as root B. modify the ulimit settings for the non-root user C. run this script as root $PRECISION_HOME/scripts/setup_run_as_root.sh D. run this script as root $PRECISION_HOME/scripts/setup_run_as_setuid_as_root.sh Answer: D Explanation:

QUESTION NO: 29 What are three requirements to limit discovery to only a list of nodes stored in a CSV file? (Choose three.) A. clear check box from Use File Finder in Discovery B. change Enable Feedback Control to No Feedback C. clear check boxfrom Use Ping Finder in Discovery D. in the drop-down box labeled File Type, choose .csv E. add new seed in the Use Ping Finder in Discovery section F. enter the provided CSV file in the Use File Finder in Discovery section Answer: B,C,F Explanation:

QUESTION NO: 30 Which default configuration file lists all the active finders in IBM Tivoli Network Manager IP Edition V3.9? A. DiscoConfig.cfg B. DiscoSchema.cfg "Pass Any Exam. Any Time." - 100% Pass Guarantee 14

IBM 000-565 Exam C. ConfigSchema.cfg D. DiscoFileFinderParseRules.cfg Answer: A Explanation:

QUESTION NO: 31 A new poll has been defined within IBM Tivoli Network Manager IP Edition V3.9 (ITNM) and this generates an event into the ObjectServer as expected. What is the default behavior for ITNM events within the EventGateway and root cause analysis (RCA) plug-in? A. Events generated by the ITNM poller will be passed to the RCA plug-in by default. B. Events generated by the ITNM poller are not suitable for use within RCA calculations. C. Events generated by the ITNM poller have to be explicitly defined to be passed to the RCA plug-in. D. The RCA plug-in receives events directly from the poller and do not need to pass through the EventGateway. Answer: C Explanation:

QUESTION NO: 32 Which command allows access to the alerts.status table from the IBM Tivoli Network Manager IP Edition V3.9 server? A. itnm_start nco B. ncp_sql -server <OBJECTSERVER_NAME> -username <OBJECTSERVER_USER> C. nco_sql -domain <OBJECTSERVER_NAME> -username <OBJECTSERVER_USER> D. ncp_oql -service ObjectServer -domain <ITNM_DOMAIN_NAME> -username <OBJECTSERVER USER> Answer: D Explanation:

QUESTION NO: 33 A Juniper J6300 router with an OID of 1.3.6.1.4.1.12532.253 has been introduced the network but

"Pass Any Exam. Any Time." - 100% Pass Guarantee

15

IBM 000-565 Exam there is no classification for this device. What ensures the device inherits all properties of the base Juniper class when added to the new AOC file? A. sub_class ='Juniper1' B. superclass ='Juniper' C. parent_class = Juniper1 D. instantiation_class ='Juniper' Answer: B Explanation:

QUESTION NO: 34 Which file is modified to configure the processes that are started automatically by the ncp_ctrl process? A. CtrlServices.cfg B. ItnmServices.cfg C. DiscoSchema.cfg D. CtrlServicesSchema.cfg Answer: A Explanation:

QUESTION NO: 35 In IBM Tivoli Network Manager IP Edition V3.9 which command enables NAT Translation given write access to the configuration files? A. edit DiscoSchema.cfg - set m_UsingNAT to 0 and m_NATStatus to 1 under disco.NATStatus table B. edit DiscoSchema.cfg - set m_UsingNAT to 1 and m_NATStatus to 0 under disco.NATStatus table C. edit DiscoConfig.cfg - set m_UsingNAT to 0 and m_NATStatus to 1 under disco.NATStatus table D. edit DiscoConfig.cfg - set m_UsingNAT to 1 and m_NATStatus to 0 under disco.NATStatus table Answer: D Explanation:

"Pass Any Exam. Any Time." - 100% Pass Guarantee

16

IBM 000-565 Exam

QUESTION NO: 36 What should an administrator run to deploy IBM Tivoli Network Manager IP Edition V3.9 (ITNM) using the install wizard on a UNIX system? A. deploy.sh B. launchpad.sh C. installwizard.sh D. install.sh -i wizard Answer: B Explanation:

QUESTION NO: 37 Within the post-discovery filter builder, what is the correct syntax to stop all non-Cisco devices from being instantiated to model? A. Entity Type like 'Cisco' B. Entity Type not like'Cisco' C. Entity OIDIike'l3\6\1\9\' D. Entity OID not like'1\3\6\1\4\1\9\' Answer: C Explanation:

QUESTION NO: 38 By default, when IBM Tivoli Integrated Portal is configured to authenticate against LDAP, which authentication method is used for ncp_oql for IBM Tivoli Network Manager IP Edition V3.9 core processes? A. LDAP B. No Authentication C. NCIM Authentication D. ObjectServer Authentication

"Pass Any Exam. Any Time." - 100% Pass Guarantee

17

IBM 000-565 Exam Answer: B Explanation:

QUESTION NO: 39 What is the most efficient way to retrieve additional chassis information that resides in the public MB using SNMP during the discovery process? A. use the Details.agnt and add the additional SNMP requests B. use the ExtraDetails.agnt and add the additional SNMP requests C. use the IBM Tivoli integrated Portal and add the required SNMP variables in the Advanced section of Network Discovery Configuration tab D. use the IBM Tivoli Integrated Portal, activate the Addlnfo agent in Network Discovery Configuration page, and add the required SNMP variables in the Configuration pane of the Agent section Answer: B Explanation:

QUESTION NO: 40 A custom discovery stitcher has been used to create a custom ItnmService Service-affecting Event (SAE) object. These objects contain a customer name field in Extralnfo>m_CustomerName. This data has been transferred to NCIM and is held in a column called customerName in a custom table called customerData using a new EntityMap in DbEntityDetails.cfg. What must be done to ensure this field is used in the SAE summary? A. modify the ObjectServer SAE databases (precision.service_details) to include the custom field B. ensure that events about this service are enriched by the StandardEnrichment filter to include the Extralnfo->m_CustomerName field C. modify the SaeltnmService.cfgfileto include customerData->CUSTOMERNAME in the appropriate insert statement for the CustomerNameField D. configure the NcoSAESchema.cfg configuration file to include Extralnfo->m_CustomerName in the appropriate insert statement for the CustomerNameField Answer: C Explanation:

"Pass Any Exam. Any Time." - 100% Pass Guarantee

18

IBM 000-565 Exam

QUESTION NO: 41 Click the Exhibit button.

A user is trying to create a network view that combines standard IBM Tivoli Network Manager IP Edition V3.9 (ITNM) topology attributes with a custom ObjectServer column. When they use the drop-down list in the Network View Filter builder the column name does not appear. Which action displays the custom ObjectServer column? A. edit the EventGatewaySchema.cfg to ensure that the Adaptive Polling plug-in is configured with the correct ObjectServer column name B. edit the ncimMetaDataxmlTopoviz configuration file to ensure that the custom name is included in the searchable columns for the activeEvent table C. modiiythe ncim.mainNodedetailsviewto include the column name taking care to match the name and type exactly as they appear in the ObjectServer D. edit the activeEvent table in the ncmonitor database to include the custom column name and type and restart the appropriate processes to allow these to be picked up Answer: D Explanation:

QUESTION NO: 42 The nco_p_ncpmonitor fails to start. Which two methods can verify connectivity to the ObjectServer exists? (Choose two.)

"Pass Any Exam. Any Time." - 100% Pass Guarantee

19

IBM 000-565 Exam A. ncp_ping<OBJECT_SERVER_NAME> B. nco_ping<OBJECT_SERVER_NAME> C. nco_probe <OBJECT_SERVER_NAME> D. ncp_g_event <OBJECT_SERVER_NAME> E. nco_sql-server <OBJECT_SERVER_NAME> Answer: B,E Explanation:

QUESTION NO: 43 Which agent discovers data from devices involved in multicast groups and routes? A. CellPath90 B. StandardPIM C. StandardRPR D. CollectorLayer3 Answer: B Explanation:

QUESTION NO: 44 An IBM Tivoli Network Manager IP Edition V3.9 (ITNM) domain PRIMARY_NCP is installed and configured with a MySQL NCIM Database. Which MySQL query verifies that the ITNM domain is configured? A. select* from ncpolldata.domainMgr; B. select* from ncim.status where domain = 'PRIMARY_NCP'; C. select* from ncim.domainMgr where domainName = PRIMARY_NCP'; D. select*from mainNodeDetailswhere domainName ='PRIMARY_NCP'; Answer: C Explanation:

QUESTION NO: 45 When IBM Tivoli Network Manager IP Edition V3.9 (ITNM) is configured to a remote virtual ObjectServer pair, which ObjectServer entry list in omni.dat is necessary on the ITNM server? "Pass Any Exam. Any Time." - 100% Pass Guarantee 20

IBM 000-565 Exam A. one for Virtual ObjectServer Pair B. one for Primary and one for Backup C. one for Primary, one for Backup, and one for Virtual ObjectServer Pair D. one for Primary, one for Backup, one for ITNM fail-over, and one for Virtual ObjectServer Pair Answer: C Explanation:

QUESTION NO: 46 Which image type is recommended for scaling when creating an icon for a device class? A. TIF image B. JPG image C. PNG image D. SVG image Answer: D Explanation:

QUESTION NO: 47 A discovery is running against 800 devices and the majority of the devices are Cisco routers and switches. The current phase of Discovery is in Phase 3 and the CiscoSwitchSnmp agent is still running. The administrator wants to know how many devices are left to be discovered. Which query returns the IP addresses left to discover? A. select Address from master.entityByName; B. select m_IsManagementIP from translations.ipToBaseName where m_Protocol = 1; C. select Address from CiscoSwitchSnmp.despatch where Address NOT IN ((select Address from CiscoSwitchSnmp.returns)); D. select mUniqueAddress from CiscoSwitchSnmp.despatch where mUniqueAddress NOT IN ((select mUniqueAddressfrom CiscoSwitchSnmp.returns)); Answer: D Explanation:

QUESTION NO: 48

"Pass Any Exam. Any Time." - 100% Pass Guarantee

21

IBM 000-565 Exam Which three databases are supported by IBM Tivoli Network Manager IP Edition V3.9? (Choose three.) A. IDS V11.5 B. Oracle 11g C. MySQL V4.5 D. MSSQL2008 E. IBMDB2V97 F. Ingres Database 10 Answer: A,B,E Explanation:

QUESTION NO: 49 A customer does not know the IP ranges in use in the network other than they all start with 10.0*. Which restriction is applied to wildcard scopes in the Scope Properties dialog? A. A wildcard scope can only be used in conjunction with the Exclude option. B. IPv4 wildcards are not permitted; only IPv6 subnets can be entered as a wildcard. C. A wildcard scope cannot be used in conjunction with the Add To Ping Seed List option. D. A Class B equivalent wildcard is not permitted, wildcard scopes must be lower than a ClassB. Answer: C Explanation:

QUESTION NO: 50 A company is deploying the NCIM database to a remote server with hostname RM_NCIM. In which file should the proper configuration setting be made so that the core components can communicate with the remote database? A. $NCHOME/etc/precision/NcoLogin<DOMAIN>cfg B. $NCHOME/etc/precision/DbLogins<DOMAIN>.cfg C. $NCHOME/etc/precision/ncimLogin<DOMAIN>.cfg D. $NCHOME/etc/precision/ModelSchema.<DOMAIN>.cfg Answer: B Explanation:

"Pass Any Exam. Any Time." - 100% Pass Guarantee

22

IBM 000-565 Exam

QUESTION NO: 51 How can a user set up a network view to show all devices with a primary IP address on a subnet that starts with 172.1.2? A. ipAddress like'171.1.2' B. ipAddress like '172.1.2.?' C. ipAddress like'172.1.2.#' D. ipAddress like '172.1.2%' Answer: D Explanation:

QUESTION NO: 52 What two types of discoveries can be made using the graphical user interface? (Choose two.) A. Full Discovery B. Half Discovery C. Fast Discovery D. Total Discovery E. Partial Discovery Answer: A,E Explanation:

QUESTION NO: 53 A customer has created a new set of poll policies that are targeted against specific network views using adaptive polling. The filter conditions for these network views are broad and may contain a large number of devices for the poll policy to run against. Which two actions limit the impact this may have on the other polling? (Choose two.) A. assign a policy throttle to the poll policy limiting the maximum number of targets B. assign a Maximum Node limit in the Network View Filter builder or in the template file C. reduce the scope of the Network View filter to limit the number of devices that will be in the view at any one time D. change the status.map.maxnodes Topoviz status property to limit the number of devices within "Pass Any Exam. Any Time." - 100% Pass Guarantee 23

IBM 000-565 Exam the networkviews E. create a specific poller instance and assign the policy to this poller ensuring that the impact on the existing polling is minimized Answer: A,E Explanation:

QUESTION NO: 54 In IBM Tivoli Network Manager IP Edition V3.9 what does the ncp_mib command do when executed after installing the product? A. It displays the version number of all MIB modules. B. It loads all MIB modules from $NCHOME/precision/mibs to the NCMIB database. C. It loads and displays a list of the MIB modules contained in the MIB files and states which ones are resolved. D. It reloads and displays differences whether all MIB modules ($NCHOME/precision/mibs) are in sync with ncmib*' tables Answer: D Explanation:

QUESTION NO: 55 What is the correct method to temporarily unmanage an interface found in the topology? A. locate the interface in the structure browser, use the Tools menu and chose Unmanage B. locate the interface in the structure browser, right-click on it, and chose Unmanage from the menu C. modify the $NCHOME/precision/disco/stitchers/ManagedStatus.stch to set the interface to Extralnfo > ManagedStatus=1 D. modify the $NCHOME/precision/disco/stitchersyTagManagedEntities.stch to set the interface to Extralnfo > ManagedStatus=2 Answer: A Explanation:

QUESTION NO: 56

"Pass Any Exam. Any Time." - 100% Pass Guarantee

24

IBM 000-565 Exam How should IBM Tivoli Network Manager IP Edition V3.9 (ITNM) be completely uninstalled on a UNIX server? A. remove the files and directories B. uninstall the Deployment Engine C. run the script $NCHOME/Uninstall_iTNM -a D. run the Script $NCHOME/install.sh -uninstall Answer: C Explanation:

QUESTION NO: 57 In the Advanced tab of the Discovery Configuration graphical user interface, what does the Enable Ping Verification option do? A. It checks the availability of the IP address used for chassis (EntityType 1). B. It ensures that seed file entries are available before being passed to the discovery. C. It checks the availability of interfaces using Details.returns to ensure accurate polling. D. It ensures that subnets passed by the feedback mechanism are pinged before being sent to the Details agent. Answer: C Explanation:

QUESTION NO: 58 Which file must be modified to add a CSV data source to the Collector? A. $NCHOME/etc/precision/Collector.cfg B. $NCHOME/etc/precision/GenericCsvCollector.cfg C. SNCHOME/precision/collectors/perlCollectors/GenericCsv/GenericCsvCollector.cfg D. $NCHOME/precision/collectors/perlCollectors/Alcatel5620SamSoap/GenericCollector.cfg Answer: C Explanation:

QUESTION NO: 59 "Pass Any Exam. Any Time." - 100% Pass Guarantee 25

IBM 000-565 Exam Which two statements are true about configuring fail-over? (Choose two.) A. A static port can be configured in Configltnm.cfg file. B. A static port can be configured in ServiceData.cfg file. C. Ctrl Services is the preferred method for configuring fail-over. D. The Configltnm.cfg files must be identical on both primary and backup. E. Only ncp_model, ncp_poller and ncp_disco can be configured to fail-over Answer: B,D Explanation:

QUESTION NO: 60 The administrator of TELCO would like to create a page with a MIB browser to present two key metrics on a video wall. These metrics are not straightforward OIDs but the result of some basic calculations. Each result is based on the sum of three OID values. What should the administrator do? A. This is not possible because the MIB browser only supports the mapping of up to two plain OD's. B. The calculation of each metric (OID1 + OID2 + OID3) should be entered in the MIB OID configuration of the MIB browser. C. A poll definition should be created for each metric and used as entry in the Poll Data configuration field of the MIB browser. D. This is not possible because the two metrics are based on a total of six OIDs which is more than the maximum two allowed. Answer: C Explanation:

QUESTION NO: 61 One feature of IBM Tivoli Network Manager IP Edition V3.9 is the ability to launch context-based Web applications. The network view can be launched with the context. How is this done in the URL? A. https://host:port/ibm/console/ncp_topoviz/id=10690 B. https://host:port/ibm/console/NetworkView.do?id=10690 C. https://host:port/ibm/ncp_topoviz/NetworkView.do?id=10690 D. https://host:ponVibm/console/ncp_topoviz/NetworkView.do?id=10690

"Pass Any Exam. Any Time." - 100% Pass Guarantee

26

IBM 000-565 Exam Answer: D Explanation:

Topic 2, Volume B QUESTION NO: 62 Which configuration file holds authentication mode for the OQL Service Provider? A. Configltnm.cfg B. CtrlSchema.cfg C. AuthScherna.cfg D. ConfigSchema.cfg Answer: D Explanation:

QUESTION NO: 63 What is the recommended number of domains for a network with 400,000 entities? A. 1 B. 2 C. 3 D. 4 Answer: B Explanation:

QUESTION NO: 64 Which two polling methods can be used for Active Polling in IBM Tivoli Network Manager IP Edition V3.9 (ITNM)? (Choose two.) A. ICMP Polling B. SNMP Polling C. Adaptive Polling D. SNMP Trap Reception "Pass Any Exam. Any Time." - 100% Pass Guarantee 27

IBM 000-565 Exam E. CLI-based Demand/Response Polling Answer: A,B Explanation:

QUESTION NO: 65 In IBM Tivoli Network Manager IP Edition V3.9 (ITNM), which statement is true in NAT Discovery? A. ITNM discovers the NAT gateways before discovering the rest of the network. B. Discovery process must discover the NAT environment from inside (private network). C. Devices within a NAT domain that have only private IP addresses can be discovered or managed D. ITNM can discover the NAT domains and the rest of the network simultaneously during discovery. Answer: A Explanation:

QUESTION NO: 66 Which default directory contains icon images for a device class? A. /opt/IBM/tivoli/netcool/precision B. /opt/IBM/tivoli/tip/profiles/TIPProfile/etc/tnm/resource C. /opt/IBM/tivoli/tipv2/profiles/nPProfile/etc/tnm/resource D. /opt/IBM/tivoli/netcool/precision/prof iles/TIPProfile/etc/tnm/resource/ Answer: D Explanation:

QUESTION NO: 67 IBM Tivoli Network Manager IP Edition V3.9 (ITNM) events from IBM Tivoli Netcool/OMNIbus are not showing up in the topology views in ITNM. What can be done to determine the source of the problem? A. check that nco_g_event_trace.domain has entries "Pass Any Exam. Any Time." - 100% Pass Guarantee 28

IBM 000-565 Exam B. check that nco_poller is configured to send events C. increase the log level for nco_p_ncpmonitor and ncp_g_event to level 4 D. increase the log level for ncp_p_ncomonitor and ncp_g_event to level 4 Answer: C Explanation:

QUESTION NO: 68 A company is experiencing problems accessing their remote topology database. What could they do to see if the core components still have access to the NCIM database and determine the cause of the problem? A. use the script $NCHOME/precision/perl/scripts/ncp_db_access.pl to check the communications and access to the databases B. access the $NCHOME/etc/precision/DbLogins.cfg file and change the value for m_LogLevel to DEBUG for the problem database C. access the $NCHOME/etc/precision/ncimLogin.cfg file and change the value for m_ChckConnect to true for the problem database D. log in to the IBM Tivoli Integrated Portal and test the database connections under Administration > Database Access > Configuration Answer: A Explanation:

QUESTION NO: 69 Which action is required for the ncp_virtualdomain service to use a specific port? A. The ServiceData.cfg file must be altered to use DYNAMICNO. B. The ConfigltnmData.cfg file must be altered to use DYNAMICNO. C. The CtrlServices.cfg file must have a value set in the StaticPort field. D. The ConfigltnmData.cfg file must have a value set in the StaticPort field. Answer: A Explanation:

QUESTION NO: 70

"Pass Any Exam. Any Time." - 100% Pass Guarantee

29

IBM 000-565 Exam Which action is required for a customer to use a custom ObjectServer field in the topology lookup and Root Cause Analysis (RCA) calculations? A. modilythe ncmonitor.activeEvent table to include the custom ObjectServer field B. edit the EventGatewaySchema.cfg file to add the new field to the nco2ncp section C. register the ObjectServer alerts.status field with the RCA plug-in using the ncp_gwplugins.pl script D. no action is necessary - all ObjectServer alerts.status fields are passed to the EventGateway and plug-ins Answer: B Explanation:

QUESTION NO: 71 Which two factors require the Custom installation method rather than the Basic installation method? (Choose two.) A. There is a fail-over requirement B. The database for topology data is IDS. C. The database for topology data is IBM DB2. D. There is a requirement to install as a non-root user. E. The installation uses existing Tivoli Netcool/OMNIbus. Answer: C,E Explanation:

QUESTION NO: 72 How is IBM Tivoli Network Manager IP Edition V3.9 (ITNM) completely uninstalled on a Windows server? A. remove the files and directories B. uninstall the Deployment Engine C. runthescriptUninstall_ITNM.exe D. runthescriptlnstall.exe -uninstall Answer: C Explanation:

"Pass Any Exam. Any Time." - 100% Pass Guarantee

30

IBM 000-565 Exam

QUESTION NO: 73 In IBM Tivoli Network Manager IP Edition V3.9 for domain NCOMS, the new scope additions are not reflecting in Discovery Configuration graphical user interface or in DiscoScope.NCOMS.cfg. Which log must be verified to determine the possible cause? A. $NCHOME/log/precision/ncp_disco.NCOMS.Iog B. $ITNMHOME/profiles/TIPProfile/logs/tnm/ncp_disco.0.log C. $ITNMHOME/profiles/TIPProfile/logs/tnm/ncp_topoviz.0.log D. $ITNMHOME/profilesTIPProfile/logs/tnm/ncp_guiconfig.0.log Answer: D Explanation:

QUESTION NO: 74 Within the pre-discovery fitter builder, what is the correct syntax to filter out devices without SNMP access? A. m_HaveAccess = 0 B. m_HaveAccess <> 0 C. m_HaveAccess is null D. m_HaveAccess is not null Answer: B Explanation:

QUESTION NO: 75 In a two server distributed IBM Tivoli Network Manager IP Edition V3.9 (ITNM) setup, when both IBM Tivoli Integrated Portal (TIP) and ITNM Core components are deployed on separate servers, which server has all the MIB modules and ncp_mib binary? A. TIP server B. ITNM Core server C. both TIP and ITNM servers D. ITNM server has ncp_mib binary and all modules are located on the TIP server

"Pass Any Exam. Any Time." - 100% Pass Guarantee

31

IBM 000-565 Exam Answer: A Explanation:

QUESTION NO: 76 Given command line access to an IBM Tivoli Network Manager IP Edition V3.9 UNIX server, running which binary ensures the changes made to omni .dat are synchronized to interfaces <arch>? A. nco_sql B. ncp_oql C. ncojgen D. nco dbinit Answer: C Explanation:

QUESTION NO: 77 What is the maximum number of OIDs that can be presented in any one MIB browser? A. 1 B. 2 C. 3 D. 4 Answer: B Explanation:

QUESTION NO: 78 Which steps add a new node to the ping finder? A. 1) Navigate to the Scope page within the Network Discovery Configuration pane. 2) Click the icon to add a new scope. 3) Complete the dialog box to add a new range to the scope. B. 1) Navigate to the Seed page within the Network Discovery Configuration pane. "Pass Any Exam. Any Time." - 100% Pass Guarantee 32

IBM 000-565 Exam 2) In the section for Use File Finder in Discovery, click the icon to add a new seed. 3) Complete the dialog box to add a new file name. C. 1) Navigate to the Seed page within the Network Discovery Configuration pane. 2) In the section for Use Ping Finder in Discovery, click the icon to add a new seed. 3) Complete the dialog box to add a new IP address. D. 1) Navigate to the Advanced page within the Network Discovery Configuration pane. 2) In the section for Use Ping Finder in Discovery, click the icon to add a new seed. 3) Complete the dialog box to add a new IP address. Answer: C Explanation:

QUESTION NO: 79 What is the minimum role the administrator must give an IBM Tivoli Network Manager IP Edition V3.9 user to copy a view from his/her view collection to a global view? A. netcool_ro B. itnmadmin C. networks ew D. ncp_networkview Answer: D Explanation:

QUESTION NO: 80 What does this IBM Tivoli Network Manager IP Edition V3.9 (ITNM) command do: ncp_dh_XML rpc? A. It enables ITNM to communicate directly to EMS systems. B. It enables ITNM to communicate with the collectors using the XML-RPC interface. C. It retrieves local neighbor and entity and associates address data for each device on the collector. D. It reads the collector host seeds from a seed table in the collector Finder database and then queries the collectors specified in this table to get a list of devices managed by the EMS. Answer: B Explanation:

"Pass Any Exam. Any Time." - 100% Pass Guarantee

33

IBM 000-565 Exam QUESTION NO: 81 Before designing the architecture for IBM Tivoli Network Manager IP Edition V3.9 (ITNM), what are two requirements prior to installation? (Choose two.) A. configure LDAP settings in Tivoli Integrated Portal B. configure customized discovery stitchers for enrichment C. configure the unidirectional OMNIbus to the ITNM gateway D. designate which type of database will house the NCIM database for ITNM E. estimate the number of interfaces that will be discovered and managed by ITNM Answer: D,E Explanation:

QUESTION NO: 82 A customer has an overlay management network and must discover the target devices through this network. This is currently seeded with a ping sweep of the network. The devices do not show these addresses in the standard MIB-II ipAdEntAddr table and the devices are not discovered. Which action discovers these devices accurately? A. Use the file finder, listing the management addresses and explicitly adding m_IsOutOfBand to the column parse rules with a value of 1. B. Define the overlay network details in scope special and select Allow If In scope.special in the Advanced Tab of the discovery configuration. C. Alternative valid addresses must be used when seeding these devices; addresses that do not appear in ipAdEntAddr are ignored by the AssocAddress agent an IpToBaseName stitcher. D. Enable the Feedback option in the Advanced Tab of the discovery configuration which allows the alternative addresses on these devices to be passed back to the seeding process and bypasses the management network addresses. Answer: B Explanation:

QUESTION NO: 83 The administrator wants to deploy IBM Tivoli Network Manager IP Edition V3.9 (ITNM) but has no X-client on the UNIX system. What should be done? A. ITNM cannot be deployed without an X-client B. run the dedicated command line installation script consolejnstall.sh "Pass Any Exam. Any Time." - 100% Pass Guarantee 34

IBM 000-565 Exam C. run the installation script using the install, sh -i console option D. deploy ITNM on another sytem, make a tar file of the installation, and copy the tar file across to the server Answer: C Explanation:

QUESTION NO: 84 Which option should be run from the IBM Tivoli Network Manager IP Edition V3.9 server to verify connectivity to an Oracle NCIM database? A. ncp_oql B. ncp_ncim_diff.pl C. telnet host 3306 D. ncp_db_access.pl Answer: D Explanation:

QUESTION NO: 85 What can be run to verify SNMP access to a device from the IBM Tivoli Network Manager IP Edition V3.9 server? A. ncpjnib B. snmp_walk.pl C. ncp_d_helpserv D. ManageNode.pl Answer: B Explanation:

QUESTION NO: 86 What is the correct syntax for running a silent install with a response file on a Windows server? A. install.exe -s -f <path to response file> "Pass Any Exam. Any Time." - 100% Pass Guarantee 35

IBM 000-565 Exam B. install.exe -i silent -f <path to response file> C. install.exe -i response -f <path to response file> D. install.exe -i console -s -f <path to response file> Answer: B Explanation:

QUESTION NO: 87 Which step is required to add additional discovery information to the Structure browser in IBM Tivoli Network Manager IP Edition V3.9? A. It only needs the appropriate necessary inserts in the DbEntityDetails.cfg file. B. There are no modifications necessary All additional discovery information is automatically added. C. This requires a modification of the NCIM schema and will require a reinstallation of the NCIM database. D. It is not possible to add additional information gathered during the discovery to the structure browser as different display fields are all hard coded. Answer: A Explanation:

QUESTION NO: 88 What is required to install IBM Tivoli Network Manager IP Edition V3.9 on a Windows Server 2008 system? A. The user must be the administrator. B. The user must be IBM Tivoli Netcool/OMNIbus. C. The tipadmin user must be created on the system. D. The user must be configured in the IBM DB2 NCIM database Answer: A Explanation:

QUESTION NO: 89 A new set of ZyXEL devices have been added to the network with OID 1.3.6.1.4.1.890. Which two "Pass Any Exam. Any Time." - 100% Pass Guarantee 36

IBM 000-565 Exam steps ensure that these devices are added to the ZyXEL class? (Choose two.) A. ensure that these lines are in the new agent file: DiscoAgentSupportedDevices { { (m_Objectld like '1\36\1\4\1\890V') )" ): B. add in these lines to the new AOC file: active object 'ZyXEL' superclass = 'NetworkDevice'; instantiate_rule = "EntityOID like '1\3\6\1\4\1\.890\ : visual_icon = 'NetworkDevice'; }; C. create a newfile in $NCHOME/precision/aoc named ZyXEL.aoc D. create a newfile in $NCHOME/precision/disco/agents named ZyXEL.agnt E. apply all AOC file changes with: ncp_oql -service disco -domain DOMAIN_NAME -query "insert into stitchers.actions values ('AddClassification');" Answer: B,C Explanation:

QUESTION NO: 90 An administrator has a test server running on Windows, a production server running on UNIX, and there are no shared components. Which method transfers poll policy data between these two domains? A. ncp_perl get_policies.pl -from domain=TEST-to domain=PROD B. ncp_perl get_policies.pl -from domain=TEST -to file=ncmonitor.xml transfer file and upload ncp_perl get_policies.pl -to domain=PROD -from file=ncmonitor.xml C. ncp_perl domain_create.pl -domain PROD -clone TEST Copy the configuration files from the test server to production and restart the PROD domain. D. Poll policies cannot be transferred between Windows and UNIX systems; the policies must be redefined on the production server. Answer: B Explanation:

"Pass Any Exam. Any Time." - 100% Pass Guarantee

37

IBM 000-565 Exam QUESTION NO: 91 A customer uses an out-of-band management network for discovery and direct management of their devices. Which scope options should be selected to enable this? A. Both the in-band and out-of-band addresses should be scoped and seeded as usual. B. The in-band scope should be added as usual and the out-of-band addresses should be explicitly excluded. C. This cannot be scoped properly through the Scope Properties dialog. Additional configuration is required in the DiscoScope scope.special configuration section. D. The out-of-band network should be scoped through the Scope Properties dialog but should not be added to the Seed List (uncheck the Add to Ping Seed List option). Answer: C Explanation:

QUESTION NO: 92 The IBM Tivoli Network Manager IP Edition V3.9 administrator is asked to create a network path between two devices on a wide area network. What does the administrator need to do to determine why a path cannot be built? A. confirm that Ping-verify Each Hop is checked B. confirm that Ping-verify Each Hop is unchecked C. ensure that each device in the path has ICMP requests enabled D. ensure that routing tables exist in the mibRouting table for the NCIM topology database Answer: A Explanation:

QUESTION NO: 93 During a deployment, a customer has identified location data that they would like added to both chassis and interface events from active (IBM Tivoli Network Manager IP Edition V3.9 (ITNM)) and passive (traps, syslog etc.) event sources. This data has been successfully imported into the Discovery process using supported stitching techniques and appears in the topology as three custom Extralnfo fields (see below). ncpjnodel has been configured to transfer this location data to a custom extended NCIM database table named locations (see exhibit below). This data is only held on EntityType 1 (chassis entities) "Pass Any Exam. Any Time." - 100% Pass Guarantee 38

IBM 000-565 Exam to reduce the NCIM load. The customer has identified three ObjectServer fields that they would like this data:o be added to for all suitable events -NmosGeography, NmosCountry, and NmosSite

Example record in Model Description of the ncim.locations table

The ModelNcimDb configuration has been modified to map:

"Pass Any Exam. Any Time." - 100% Pass Guarantee

39

IBM 000-565 Exam

Based on the scenario, the location data is held in NCIM at the chassis (EntityType 1) but not against each interface entity. If an SNMP linkDown trap was received by the ObjectServer, could it be enriched with the location data held on the chassis? A. No. An interface event cannot be related to the parent chassis by the gateway B. Yes. Interface events can be enriched with chassis level data by the EventGateway C. No. The data would need to be held at both the interface and chassis level to allow this enrichment D. Yes. But only if the event is sent across the gateway for further root cause analysis and entity identification Answer: B Explanation:

QUESTION NO: 94 What should an administrator run to deploy IBM Tivoli Network Manager IP Edition V3.9 (ITNM) using the install wizard on a Windows system? A. deploy.exe B. launchpad.exe C. installwizard.exe D. launchwizard.exe -I Answer: B Explanation:

"Pass Any Exam. Any Time." - 100% Pass Guarantee

40

IBM 000-565 Exam

QUESTION NO: 95 What is a user restriction when installing IBM Tivoli Network Manager IP Edition V3.9 (ITNM) on Windows Server 2008? A. ITNM must be installed as the Administrator user. B. ITNM cannot be installed as the Administrator user. C. ITNM must be installed as a non-administrative user. D. The installation user must belong to the Users group. Answer: A Explanation:

QUESTION NO: 96 What should be done to start IBM Tivoli Network Manager IP Edition V3.9 automatically in a Windows environment? A. use the ncp_ctri.bat script B. usethecommanditnm_start.bat -auto C. configure auto-startup of ncp_ctrl in CtrlServices_Domain.cfg D. change the ncp_ctrl <domain> service from manual to automatic Answer: D Explanation:

QUESTION NO: 97 By default, which three statements are true about SNMP and Telnet account settings in the Discovery Configuration window? (Choose three.) A. SNMP version 3 is required. B. SSH access can be configured. C. Expected Telnet prompts can be modified. D. SNMP strings have to be specified based on IP subnet range. E. SNMP and Telnet accounts require the Administrator to run ncp_crypt. F. SNMP and Telnet accounts are automatically encrypted into the cfg file.

"Pass Any Exam. Any Time." - 100% Pass Guarantee

41

IBM 000-565 Exam Answer: B,C,F Explanation:

QUESTION NO: 98 After IBM Tivoli Netcool/OMNIbus, WebGUI, and IBM Tivoli Network Manager IP Edition V3.9 (ITNM) have been installed, the Administrator will have to configure the systems in a hot standby fail-over environment. The ITNM domains are named ITNM_PRI and ITNM_BAK. Which three files are required to configure fail-over for WebGUI and ITNM? (Choose three.) A. server.init B. wimconfig.xml C. ServiceData.cfg D. DbLogins.ITNM_PRI.cfg E. Configltnm.ITNM_BAK.cfg F. ncwDataSourceDefinitions.xml Answer: C,E,F Explanation:

QUESTION NO: 99 Which step is required for setting up NCIM replication? A. in CtrlServices.cfg, set the value of ReplicateNcimto 1 B. in Configltnm.cfg.set the value of Is Replicating Ncimto 1 C. in Configltnm.cfg, set both primary and backup to point to the same NCIM D. in ServiceData.cfg, add a line such as: SERVICE: ncim DOMAIN: VIRTUAL ADDRESS: 127.123.209.55 PORT: 1234 SERVERNAME: my host name DYNAMIC: NO Answer: B Explanation:

QUESTION NO: 100 IBM Tivoli Network Manager IP Edition V3.9 can create right-click tools from the topology display. Which two steps need to be taken to enable this functionality? (Choose two.)

"Pass Any Exam. Any Time." - 100% Pass Guarantee

42

IBM 000-565 Exam A. create the CGI script that will launch for the tool B. create the HTML page for the scripted tool page C. edit the tool and menu XML configuration files to incorporate the tool D. determine the users and security context for those who will be using the tool E. determine which fields from alerts.status will be sent as arguments to the tool Answer: C,D Explanation:

QUESTION NO: 101 Which stitcher is designated to add in custom entities and connections to the discovered topology? A. PresetLayer.stch B. FullDiscovery.stch C. BuildFinalEntity.stch D. ModifylPContainment.stch Answer: A Explanation:

QUESTION NO: 102 Which action must be taken on the ObjectSetver to allow the IBM Tivoli Network Manager IP Edition V3.9 Service-affecting Events (SAE) to be raised? A. ensure the update_service_affecting_events trigger is enabled B. no action - the ObjectServer is not responsible for managing SAE C. no action - SAE are raised by the SAE plug-in directly to the ObjectServer D. populate the precision.service_details and precision.entity_service tales with data Answer: A Explanation:

QUESTION NO: 103 A discovery has completed successfully but does not contain the IBM Tivoli Network Manager IP Edition V3.9 (ITNM) server, and the EventGateway has not been configured to use another IP address. What is the impact on the EventGateway functionality? "Pass Any Exam. Any Time." - 100% Pass Guarantee 43

IBM 000-565 Exam A. The EventGateway will start but all plug-ins will be disabled. B. No events will be passed to the root cause analysis (RCA) plug-in. C. RCA will work for all suppression types except isolated suppression. D. Standard event enrichment will function for chassis but not interface level entities. Answer: C Explanation:

QUESTION NO: 104 Which OQL query determines which devices in a model are Permanently Unmanaged? A. select from master.entityByName where Extralnfo->m_ManagedStatus =1 and EntityType=1; B. select * from master.entityByName where Extralnfo->m_ManagedStatus = 2 and EntityType=1; C. select "from ncim.managedStatus where Extralnfo->m_ManagedStatus <> NULL and EntityType=1; D. select"from scratchTopology.entityByName where Extralnfo->m_ManagedStatus = 2 andEntityType=1; Answer: B Explanation:

QUESTION NO: 105 An administrator is adding a new table to hold some customer data in NCIM. Which table does this additional table need to be linked to (using entityId) to ensure that the data is properly displayed and managed? A. Entity B. Chassis C. Interface D. Entity Data Answer: D Explanation:

QUESTION NO: 106 IBM Tivoli Network Manager IP Edition V3.9 (ITNM) cannot connect to the ObjectServer. Which "Pass Any Exam. Any Time." - 100% Pass Guarantee 44

IBM 000-565 Exam file contains the connection information for the ObjectServer which ITNM is attempting to connect to? A. $NCHOME/etc/omni.dat B. $NCHOME/etc/precision/NcoConnectionSchema.cfg C. $NCHOME/etc/omnibus/interfaces.<arch> (arch = operating system name) D. $NCHOME/etc/precision/interfaces <arch> (arch = operating system name) Answer: A Explanation:

QUESTION NO: 107 A customer uses IBM Tivoli Netcool/lmpact to populate a column named ServiceLevel in the ObjectServer. This column is populated after some additional operator driven workflow and can have dynamic values. The customer would like to see the discovered network topology partitioned using this ServiceLevel column in conjunction with some asset data discovered from the device. Which action must be taken to allow the ServiceLevel column to be used in the creation of a Network View? A. create a new table in NCIM to hold the ServiceLevel data and add the required configuration to the DbEntityDetails configuration file B. add the ServiceLevel column name to a dynamic template and add the ServiceLevel column details to the ncpgui.dynamicView table C. modify/the ncmonitor activeEvent table to include the ServiceLevel column name and type and then restart the EventGateway process D. modify the EventGateway configuration to enable the ServiceLevel column name to be passed to the plug-ins using the nco2ncp configuration section Answer: C Explanation:

QUESTION NO: 108 Which OQL query monitors the current discovery status? A. select*from disco.status; B. select*from discovety.status; C. select m_CurrentStatus from disco.status; D. select m_CurrentStatus from stitchers status;

"Pass Any Exam. Any Time." - 100% Pass Guarantee

45

IBM 000-565 Exam Answer: A Explanation:

QUESTION NO: 109 What does IBM Tivoli Network Manager IP Edition V3.9 require to connect to an IBM DB2 database? A. SID, database account name, database account password B. hostname, port, database name, SID, database account password C. hostname, port, database name, database account name, database account password D. hostname, port, database name, server type, database account name, database account password Answer: C Explanation:

QUESTION NO: 110 A new custom field was created in model to accommodate data regarding the building location of a device. Which table in NCIM should this data go into so that this field may be used to create a custom view? A. ncim.entity B. ncim.extralnfo C. ncpgui mappings D. create a custom table specifically for this purpose Answer: D Explanation:

QUESTION NO: 111 Which discovery phase runs the query of routing tables in the network? A. Phase-1 B. Phase 1 C. Phase 2 "Pass Any Exam. Any Time." - 100% Pass Guarantee 46

IBM 000-565 Exam D. Phase 3 Answer: B Explanation:

QUESTION NO: 112 Which option verifies the availability of the seed list in IBM Tivoli Network Manager IP Edition V3.9? A. in DiscoConfig.cfg set m_Ping Verification=1 under disco.config B. in DiscoSchema.cfg set m_PingVerification=1 under disco.config C. in DiscoConfig.cfg set m_CheckFileFinderReturns=1 under disco.config D. in DiscoSchema.cfg set m_CheckFileFinderReturns=1 under disco.config Answer: C Explanation:

QUESTION NO: 113 When performing a full or partial rediscovery, what does the m_Rebuildl_ayers=1 option do in IBM Tivoli Network Manager IP Edition V3.9? A. Disco rebuilds the entire topology on partial discovery cycles. B. Disco does not build connectivity tables on any discovery cycles. C. Disco rebuilds topology on partial but not on full discovery cycles. D. Disco rebuilds the entire topology only on scheduled discovery cycles. Answer: A Explanation:

QUESTION NO: 114 During discovery, the AssocAddress receives device information from the Details agent. The AssocAddress agent then downloads all the IP addresses associated with the device and adds them to which table? A. finders.returns "Pass Any Exam. Any Time." - 100% Pass Guarantee 47

IBM 000-565 Exam B. master.entityByName C. translations.ipToBaseName D. scratchTopology.entityByName Answer: C Explanation:

QUESTION NO: 115 Click the Exhibit button.

A new poll definition named MyNewPollDefinition is defined and assigned to a new poll policy. The policy has been enabled as MyNewPollPolicy and the poll definition and policy information is in the exhibit. How can this be interpreted? A. The poll has failed to execute correctly. B. The poll has resulted in some events being raised. C. The policy has no targets within the current topology. D. The poll is not enabled as indicated by the x cross icon. Answer: A Explanation:

QUESTION NO: 116 Which EventGateway OQL configuration table controls the mapping of Eventlds to EventMaps? A. config.defaults B. config.nco2ncp

"Pass Any Exam. Any Time." - 100% Pass Guarantee

48

IBM 000-565 Exam C. config.eventMaps D. config.precedence Answer: D Explanation:

QUESTION NO: 117 Which command provides the installed version of IBM Tivoli Netcool/OMNIbus? A. itnm_status nco B. nco_sql -version C. nco_objserv -version D. ncp objserv -version Answer: C Explanation:

QUESTION NO: 118 Which data is required for the Collector Finder Seed File? (Choose two.) A. The name of the collector process. B. The port on that device on which the collector is listening. C. The hostname of the device on which the collector is running. D. The port of the Enterprise Management Server the collector is talking to. E. The hostname of the Enterprise Management Server the collector is talking to. Answer: B,C Explanation:

QUESTION NO: 119 Which default file must be modified for configuring discovery to run every Friday at 1:00 a.m. in the morning? A. Feedback.stch B. FullDiscovery.stch "Pass Any Exam. Any Time." - 100% Pass Guarantee 49

IBM 000-565 Exam C. FullDiscoveryPending.stch D. FnderRediscoveryToPingFinder.stch Answer: B Explanation:

QUESTION NO: 120 A user is running the ObjectServer in secure mode. Which file must be changed to allow connections to the ObjectServer by the nco_p_ncpmonitor probe? A. NcoLogins.cfg B. NcoGatelnserts.cfg C. nco_p_ncpmonitor.props D. EventGatewaySchema.cfg Answer: C Explanation:

QUESTION NO: 121 In IBM Tivoli Network Manager IP Edition V3.9 (ITNM), which command increases the trace level logging dynamically of the ncpjnodel using ncp_oql? A. It is not possible to change trace level logging with ncp_oql. It is performed only using the USR2 signal. B. ncp_oql -domain NCOMS -service Ctrl -query "update services.inTray set logLevel=4 where serviceName=ncp_mode1; C. ncp_oql -domain NCOMS -service Ctrl -query "update services.inTray set traceLevel = 4 where serviceName = ncp_mode1; D. ncp_oql -domain NCOMS -service Ctrl -query "update services.inTray set messageLevel = 4 where serviceName = t ncp_mode1; Answer: C Explanation:

QUESTION NO: 122 When configuring a new agent definition, what does the command DiscoAddTagsnmpGetNext "Pass Any Exam. Any Time." - 100% Pass Guarantee 50

IBM 000-565 Exam ("SubnetworkName") do? A. It creates a text field under the Extralnfo column which stores the retrieved value for the SubnetworkName. B. It creates a list (type text) field under the Extralnfo column which stores the retrieved table values for the SubnetworkName. C. It creates an additional text field in the scratchTopology.entityByName which stores the retrieved value for the SubnetworkName. D. It creates an additional list field (type text) in the scratchTopology.entityByName which stores the retrieved table values for the SubnetworkName. Answer: B

"Pass Any Exam. Any Time." - 100% Pass Guarantee

51