Fluids
Fluids
Fluids
States of Matter Phase Changes Density Pressure Pascals Principle Buoyant Force Archimedes Principle
Bernoullis Principle Torricellis principle Viscosity Turbulence Cohesion Adhesion Surface Tension
States of Matter
Matter comes in a variety of states: solid, liquid, gas, and plasma. The molecules of solid are locked in a rigid structure and can only vibrate. (Add thermal energy and the vibrations increase.) Some solids are crystalline, like table salt, in which the atoms are arranged in a repeating pattern. Some solids are amorphous, like glass, in which the atoms have no orderly arrangement. Either way, a solid has definite volume and shape. A liquid is virtually incompressible and has definite volume but no definite shape. (If you pour a liter of juice into several glasses, the shape of the juice has changed but the total volume hasnt.)
A gas is easily compressed. It has neither definite shape nor definite volume. (If a container of CO2 is opened, it will diffuse throughout the room.)
A plasma is an ionized gas and is the most common form of matter in the universe, since the insides of stars are plasmas.
Phase Changes
Condensation: Gas Liquid Melting: Solid Liquid Freezing: Liquid Solid Sublimation: Solid Gas
A volatile liquid is one that evaporates quickly. Examples of sublimation: Dry ice (frozen CO2) goes directly from the solid to the gaseous state (it sublimates). This creates an eerie, old fashioned effect, like graveyard fog in a spooky, old monster movie. Comets are very small objects containing frozen gases that sublimate when the comet get close enough to the sun. This creates the characteristic tail the can be millions of miles long.
Fluids
The term fluid refers to gases and liquids. Gases and liquids have more in common with each other than they do with solids, since gases and liquids both have atoms/ molecules that are free to move around. They are not locked in place as they are in a solid. The hotter the fluid, the faster its molecules move on average, and the more space the fluid will occupy (if its container allows for expansion.) Also, unlike solids, fluids can flow.
Density
Density is given by:
m = V
The symbol for density is rho. Density is simply mass per unit volume. Water, for example, has a density of about 1 gram per milliliter. (It varies slightly with temperature and pressure.) The S.I. unit for density is the kg / m 3. For water: 1000 kg 1 g 1 mL (100 cm) 3 1 kg = = mL 3 3 m3 1 cm m 1000 g
Pressure F P= A
Pressure is simply force per unit area. Pressure is often measured in pounds per square inch (psi), atmospheres (atm), or torr (which is a millimeter of mercury). The S.I. unit for pressure is the pascal, which is a Newton per square meter: 1 Pa = 1 N / m 2. Atmospheric pressure is at sea level is normally: 1 atm = 1.01 10 5 Pa = 760 torr = 14.7 psi. At the deepest ocean trench the pressure is about 110 million pascals.
Schmedrick uses his 6 lb tofu recipe book to teach his little brother Poindexter about density and pressure. He sets the book on the table and calculates the pressure on the table, which depends on the books orientation. The books density is 6 lb / (9 14 3) = 0.0159 lb / in 3. Note the pressures are very small compared to atmospheric pressure. P = 6 lb / (9 3 ) = 0.222 lb / in 2
Tofu Cookbook P = 6 lb / (3 14 ) = 0.143 lb / in 2
P = 6 lb / (9 14 ) = 0.0476 lb / in 2
Tofu Cookbook 3 14
Pressure in a Fluid Unlike the cookbook on the table, the pressure in a fluid acts in all
directions, not just down. The force on a 4 ft 2 desktop due to the air is:
Pressure in a fluid is the result of the forces exerted by molecules as they bounce off each other in all directions. Therefore, at a given depth in a liquid or gas, the pressure is the same and acts in every direction.
The lower the pressure on a liquid, the easier it is to make it boil, i.e., as pressure increases, so does the boiling pt. This is because in order for a liquid to boil, molecules need enough kinetic energy to break free from the attraction of the molecules around it. (Molecules with this much energy are in a gaseous state.) Its harder for a liquid to vaporize when subjected to high pressure, since gases take up more space than liquids. Water, for example, boils at temps below 100 C up in the mountains where the air pressure is lower. (Water boils at 90 C at 10,000 ft.) It takes longer to cook food in boiling water at high altitudes because the boiling water isnt as hot. In a vacuum water will boil at any temp, since there is no pressure at the surface to prevent the water from vaporizing. At high pressure water boils at a high temp. In a pressure cooker water can remain liquid up to 120 C, and the hotter water can cook food faster.
Freezing of Solutions
The freezing point of a solution, such as salt water, is lower than the freezing point for the solvent by itself, e.g., pure water. The higher the concentration of the solute, e.g. salt, the more the freezing point is lowered. The reason it is more difficult to freeze a liquid when a substance is dissolved in it is because the foreign molecules or atoms of a solute interfere with the molecules of the solvent as theyre trying to form a crystalline structure. In the case of salt water, the sodium and chloride ions from the dissolved salt get in the way and make it harder for the water molecules to crystallize as a solid.
Boiling of Solutions
If youre in a hurry and you need to bring water to boil on a stove, should you add salt to it? answer: No, salt actually increases the boiling point of water, thereby increasing your wait. In order for water to boil, the vapor pressure of the water must match to air pressure around it. The hotter the water, the higher the vapor pressure will be. Ions from the dissolved salt take up space near the surface of the water. With fewer water molecules exposed to the air, the vapor pressure is reduced. This means that salt water must be greater than 100 C in order to boil.
Suction
Suction is a force that causes a fluid or solid to be drawn into a space or to adhere to a surface because of the difference between the external and internal pressures. A vacuum cleaner creates a low pressure region inside itself. The higher pressure external air rushes into the low pressure region, taking dirt with it.
A dart with a suction cup tip sticks to a wall because there is very little air between the wall and the suction cup, so the greater pressure on the outside forces it into the wall. This increases the frictional force enough to support the darts weight. Eventually air seeps in, and the pressure difference diminishes until the dart falls.
Air pressure is lower up the mountains than at sea level. Water pressure is much lower at the surface than down deep. Pressure depends on fluid density and depth:
Pressure Formula
P = gh
proof: Imagine a box under water with the top at the surface. The pressure at the bottom is greater because of the weight of all the water above it:
m water
P = F / A = (m water g) / A
= (m water g h) / (A h) = (m water g h) / V water = water g h
Because of the air on top of the water, P = PA + g h, where PA is the air pressure at sea level, but PA is often negligible when h is large.
Pressure Depends on Depth, not Shape All these containers are the same height. Therefore, the
pressure at the bottom of each is the same. The shape matters not ! (See upcoming slides for further explanation.)
Note: Were talking about the pressure inside the fluid, not the pressures exerted by the containers on the table, which would greater for a cylinder than a cone of the same height & base.
Pressure at a Given Depth is Constant At a given depth, pressure must be the same. If it werent,
the fluid would have to be moving to the right, left, or back & forth, which doesnt happen with a fluid in equilibrium. Imagine submersing a container of water in the shape of a rectangular prism (a box). If the pressure at A were greater than at B, then there would be a net force on the container to the right, since the area is the same at each side.
A B
The pressure at Y is greater than that of the surface by an amount g h, where is the density of the fluid. The same is true for Q. Since Y and Z are at the same depth, their pressures are the same. Therefore, if the containers hold the same type of fluid, the pressure at at Z is the same as the pressure at Q, even though the containers have different shapes. We can repeat this process several times for an oddshaped container: The pressure difference from A to B depends only on their vertical separation. A W X
h Z Y B
Barometers
vacuum mercury C
The pressure at A is the same as the pressure of the surrounding air, since its at the surface. A and B are at the same pressure, since they are at the same height. The pressure at C is zero, since a vacuum has no pressure. The pressure difference from B to C is g h (where is the density of mercury), which is the pressure at B, which is the pressure at A, which is the air pressure. Thus, the height of the barometer directly measures air pressure. At normal air pressure, h 30 inches (760 mm), which is 760 torr. The weight of the column of mercury is balanced by the force exerted at the bottom due to the air pressure. Since mercury is 13.6 times heavier than water, a water barometer would have to be 13.6 times longer.
Suppose youve got some incompressible fluid, such as water, enclosed in a container. Any change in pressure applied to the fluid will be transmitted throughout the fluid and to the walls of the container. This change in pressure is not diminished even over large volumes. This is Pascals principle.
Example 1: You squeeze a tube of toothpaste. The pressure of the toothpaste does not just go up at the place where you are squeezing it. It goes up by the same amount everywhere in the tube. Example 2: If someone is choking and you do the Heimlich maneuver, you apply a force to his abdomen. The increase in pressure is transmitted to his throat and dislodges the food on which he was choking.
Pascals Principle
A force F1 is applied to a hydraulic press. This increases the pressure throughout the oil, lifting the car--Pascals principle. This would not work with air, since air is compressible. The pressure is the same throughout the oil (since the effect of depth is negligible), so P = F1 /A1 = F2 /A2 F2 = (A2 / A1) F1 Since A2 > A1 the applied force is magnified by the ratio of the areas. The I.M.A. of this machine is A2 / A1. continued on next slide
Hydraulic Press
h2 h1 A1 F1 A2
oil
F2
Hydraulic Press
F2 = (A2 / A1) F1 = (h1 / h2) F1
(cont.)
The volume of oil pushed down on the left is the same as the increase on the right, so A1 h1 = A2 h2. Using the result on the last slide, we get:
F2 h2 = F 1 h1
This shows that the output work equals the input work (ideally) as conservation of energy demands. Its that force distance tradeoff again. With friction, the input work would be greater.
h2 h1 A1 F1 A2
oil
F2
We all know that dense objects sink in fluids of lower density. A rock sinks in air or water, and oil floats on top of water. Basements stay cool in the summer because cool air is denser than warm air. The USS Eisenhower is a 95 000 ton nuclear powered aircraft carrier made of dense materials like steel, yet it floats. If you weigh yourself under water, the scale would say you are lighter than your true weight. All of these facts can be explained thanks one of the greatest scientists of all time--the Greek scientist, mathematician, and engineer--Archimedes.
Floating in Fluids
USS Eisenhower
Archimedes
Archimedes principle states that any object that is partially or completely submerged in a fluid is buoyed up a force equal to the weight of the fluid that the object displaces. In the pic below, a hunk of iron, a chunk of wood, and a vacuum are all submerged. Since each is the same size, they all displace the same amount of fluid. Archimedes principle says that the buoyant force on each is the weight of the fluid that would fit into this shape: For the iron, mg > FB (assuming iron is denser than the fluid), so it sinks. For the wood, mg < FB (assuming the fluid is denser than wood), so it floats to the surface.
continued on next slide
Archimedes Principle
iron FB
wood FB
vacuum FB
mg
mg
Part of Captain Hooks boat is below the surface. Archimedes (cont.) principle says that the weight of the water Hooks boat displaces equals the buoyant force, which in this case is the weight of the boat and all on board, since the boat is floating. In the pic on the right, the boat is floating, so FB = mboat g. Archimedes says FB = mw g, the weight of water displaced by the boat (shaded). Thus, mw g = mboat g, or mw = mboat. This means the more people in the boat, the heavier it will be, and the lower the boat will ride. Barges adjust their height by taking on and pumping out water. Steel can float if shaped like a boat, because in that shape it can displace as much water as its own weight. boat
Archimedes Principle
The fluid is pressing on the box on all sides. The horizontal forces cancel out. The buoyant force is given by FB = Fup - Fdown. Fup > Fdown since the pressure is lower at the top by the amount g h, where is the density of the fluid. So, FB = g h A = gV, where V is the volume of the box. But V is the mass of the fluid that the box displaces, so gV is the weight of fluid displaced. Thus, the buoyant force = the weight of displaced fluid.
Fup
Schmedrick decides to take up ice sculpting. After several failed attempts, he notices that his little cousin Lila has carved a beautiful likeness of Poseidon, the Greek god of the sea. Ice is less dense than water, 0.917 g / mL, so it floats. If Schmed and Lila take Poseidon to the sea, what percentage of the sculpture (by volume) will show above water? answer: Let mw= mass of water displaced; mice= mass of whole statue. Archimedes says mw g = mice g w Vw = ice Vice The fraction of the statue below water is Vw / Vice= ice / w. So, the portion of the ice above water is 1 - (ice / w) = 1 - (0.917 / 1) = 0.083 = 8.3% This means Poseidon will mostly be under water.
Archimedes Example
Icebergs
Usually 1/8 th of an iceberg is above the waterline. That part consists of snow, which is not very compact. The ice in the cold core is very compact (and thus relatively heavy) and keeps 7/8 ths of the iceberg under water. The temperature in the core is constant: between -15 and -20 C. An iceberg that has tumbled over several times, has lost is light snow layers and so the iceberg gets relatively heavier than before (with the snow) and because of the greater compactness, only 1/10 th rises above the surface.
Archimedes Problem
While Yosemite Sam is trying to make rabbit stew, Bugs is doing a little physics in the pot. Hes standing on scale monitoring his apparent weight. 1. As Bugs pours out water, what happens to his apparent weight and why? answer: It goes up since less water in the pot means less water for his body to displace, so the buoyant force is smaller, and the normal force (scale reading) is greater. 2. If Bugss actual weight is W, what volume of water is Bugs displacing when the scale reads 2 / 3 W ? answer:
W = N + FB = 2 W / 3 + FB
W / 3 = FB = mw g = wVw g Vw = W / (3 w g)
N FB W
v1
x1
A1
x2
A2
An incompressible fluid, like water, flowing through a pipe will slow down if the pipe gets wider. Heres why: The number of gallons per minute flowing through the little pipe must be the same for the big pipe, otherwise fluid would be disappearing or appearing out of nowhere. (Its incompressible.) If the green volume and the purple volume both travel through the pipe in the same amount of time,
A1 x1 = A2 x2
A1 v1 = A2 v2
Bernoulli Equation:
P + v2 + g y = constant
v1
v2
P2
P1 y1
P = pressure
y2
v = fluid speed
y = height
As a nonviscous, incompressible fluid flows through a pipe that changes in both area and height, the pressure and fluid speed change, but the above expression remains constant everywhere in the pipe.
v2
F2
x2
P2
A2
P1 y1
A1 x1
F1
y2
Let green volume = purple volume = V. The volumes travel through the pipe in the same time. Lets look at the work done on all the fluid from A1 to A2 by the pressure in the pipe at each end as the fluid at the bottom moves a distance x1 : W = F1 x1 - F2 x2 = P1 A1 x1 - P2 A2 x2 = P1 V - P2 V
continued on next slide
v2 F2 x2
P2
A2
P1 y1
A1 x1
F1
y2
So the net work done by the fluid pressure is W = (P1 - P2) V. This work goes into changing the potential and kinetic energy of the fluid:
where m is the mass of the moving volume of fluid. Dividing by the volume, we get: P1 - P2 = g y2 - g y1 + v22 - v12
P1 + v12 + g y1 = P2 + v22 + g y2
continued
(cont.)
The last equation shows that P + v 2 + g y is the same before and after traveling from the left end of the pipe to the right end. Since these two places are completely arbitrary, our derivation shows that P + v 2 + g y is a constant throughout the pipe, and the Bernoulli equation is proven! This equation is useful in many applications, from aviation to medicine.
Bernoullis Principle
Bernoullis principle says that the faster a fluid is moving the less pressure it exerts.
This is true for a nonviscous fluid flowing at a constant height. It follows directly from the Bernoulli equation: P + v 2 + g y = constant. If y is a constant, then P + v 2 = constant. This shows that if pressure increases, then v decreases, and versa vise.
Airplanes
Bugs Bunny & Yosemite Sam are taking a little plane ride. What does Bernoullis principle have to do with this situation? answer: Air is not incompressible, but the Bernoulli principle can explain, in part, why an airplane flies. The upper surface of the wing has a smaller radius of curvature than the bottom surface. Air on top must travel farther, so it moves faster, and the pressure there is lower, creating lift. Also, because of the wings upward tilt, air is pushed downward. So, the air pushes back on the wing in the direction of F.
In an unfortunate mishap, the Tidy Bowl man gets flushed. With the info given below, lets figure out the pressure difference he and his boat experience as he travels across the pipe. Since the wider pipe has 4 times the area, the water speed there is 4 times slower (recall A v = constant). So, v2 = 2 m/s, which means P2 > P1. From Bernoullis equation at a constant height, we get:
Bernoulli Example 1
P1 + v12 = P2 + v2 2 P = P2 - P1 = v12 - v2 2 = (v12 - v2 2) = (1000 kg / m3) (64 m2 / s2 - 4 m2 / s2) = 30 000 kg / (m s2) = 30 000 kg m / (s2 m2) = 30 000 N / (m2) = 30 000 Pa
P1
8 m/s A
v2
4A
P2
Bernoulli Example 2
air flow
water
Three vertical pipes open up inside the top pipe, in which air is flowing. Because air flows faster in the thin section of the top pipe, the pressure is lower there, and the water level beneath it rises more than in the other two. The difference in pressure between the thick section of the top pipe and the thin section is given by: P = g h.
After eating some of Popeyes spinach Olive Oyl clubs a ball clear across the course and into a water tower. How far from the base of the tower does the water land? answer: This is like water moving downward through a very large pipe and then moving sideways through a very small pipe. Well find vh using Bernoullis equation and then do projectile motion. Both at the hole and the top the water is exposed to the air, so the pressure there is normal air pressure. Bernoulli says:
Torricellis Law
vt 8m vh
15 m
Torricelli
(cont.)
vt 8m vh
8 g = vh2
vh = 2 g (8)
= 12.522 m / s. In general, the speed of a fluid leaking from a hole is given by:
15 m
v= 2 gh
This is known as Torricellis principle. continued
(cont.) The water molecules shooting out of the hole are projectiles being shot horizontally at 12.522 m / s from 15 m up.
Torricelli
y = v0 t + a t 2
-15 = 0 + -4.9 t 2
The range, then, is:
t = 1.75 s
8m vh
15 m
Note: As the water level decreases, the speed decreases at the hole, and so does the range.
The Big Bad Pig is about to blow down the house of the Three Little Wolves. The little wolves live in a little flat-roofed house. The wolf home has very sturdy walls, so the Big Bad Pig decides to incorporate a little physics into his attack. Instead of blowing directly on the walls, he blows over the roof. He blows hard enough that the air above the roof is moving fast enough to create a large pressure difference. Inside the air is at normal atmospheric pressure. Outside it is much lower. The pressure difference can blow the roof right off the Three Little Wolves house. Strong, naturally occurring winds can damage structures in the same way.
Different kinds of fluids flow more easily than others. Oil, for example, flows more easily than molasses. This is because molasses has a higher viscosity, which is a measure of resistance to fluid flow. Inside a pipe or tube a very thin layer of fluid right near the walls of the tube are motionless because they get caught up in the microscopic ridges of the tube. Layers closer to the center move faster and the fluid sheers. The middle layer moves the fastest.
Viscosity
v=0
The more viscous a fluid is, the more the layers want to cling together, and the more it resists this shearing. The resistance is due the frictional forces between the layers as the slides past one another. Note, there is no friction occurring at the tubes surface since the fluid there is essentially still. The friction happens in the fluid and generates heat. The Bernoulli equation applies to fluids with negligible viscosity.
Turbulence
An unexpected food fights erupts in the UHS lunchroom, and someone chucks a tomato before taking cover. The tomato is moving to the left, but from its perspective, the air is moving to the right. Most of the air moves around the air in a stable, streamline flow. Behind the tomato, though, the flow takes the form of irregular whirlpools called turbulence. Other examples of this include rising smoke and white water rapids. Turbulence only occurs if a certain speed is exceeded, which depends on object size as well as fluid density and viscosity. Assymetry in a moving object causes asymmetric turbulence patterns. If the anonymous tomato chucker had put some spin on it, the turbulence would be less symmetric, pressure on opposite sides of the tomato would be different, and the result would be a curve ball.
Cohesion is the clinging together of molecules/atoms within a substance. Ever wonder why rain falls in drops rather than individual water molecules? Its because water molecules cling together to form drops. Adhesion is the clinging together of molecules/atoms of two different substances. Adhesive tape gets its name from the adhesion between the tape and other objects. Water molecules cling to many other materials besides clinging to themselves.
continued
Cohesion & Adhesion (cont.) The meniscus in a graduated cylinder of water is due to the
adhesion between water molecules the sides of the tube. The adhesion is greater than the cohesion between the water molecules. The reverse is true about a column of mercury: Mercury atoms are attracted to each other more strongly than they are attracted to the sides of the tube. This causes a sort of reverse meniscus.
H2O
Hg
positive side
To understand why molecules cling to each other or to other molecules, lets take a closer look at water. Each blue line represents a single covalent bond (one shared pair of electrons). Two other pairs of electrons also negative side surround the central oxygen atom. The four electron pairs want to spread out as much as possible, which gives H2O its bent shape. It is this shape that account for waters unusual property of expanding upon freezing.
The shared electrons are not shared equally. Oxygen is more electronegative than hydrogen, meaning this is an unequal tug-o-war, where the big, strong oxygen keeps the shared electrons closer to itself than to hydrogen. The unequal sharing, along with the electron pairs not involved in sharing, make water a polar molecule. Water is neutral, but it has a positive side and a negative side. This accounts for waters cohesive and adhesive nature as well as its ability to dissolve so many other substances.
The dashed lines represent weak, temporary bonds between molecules. Water molecules can cling to other polar molecules besides themselves, which is why water is a good solvent. Water wont dissolve nonpolar molecules, like grease, though. (Detergent molecules have polar ends to attract water and nonpolar ends to mix with the grease.) Nonpolar molecules can attract each other to some extent, otherwise they couldnt exist in a liquid or solid state. This attraction is due to random asymmetries in the electron clouds around the nuclei of atoms.
How do trees pump water hundreds of feet from the ground to their highest leaves? Why do paper towels soak up spills? Why does liquid wax rise to the tip of a candle wick to be burned? Why must liquids on the space shuttle be kept covered to prevent them from crawling right out of their containers?! These are all examples of capillary action--the movement of a liquid up through a thin tube. It is due to adhesion and cohesion. Capillary action is a result of adhesion and cohesion. A liquid that adheres to the material that makes up a tube will be drawn inside. Cohesive forces between the molecules of the liquid will connect the molecules that arent in direct contact with the inside of the tube. In this way liquids can crawl up a tube. In a pseudo-weightless environment like in the space shuttle, the weightless fluid could crawl right out of its container.
continued
Capillary Action
(cont.) The setups below looks just like barometers, except the tubes are open to the air. Since the pressure is the same at the base and inside the tube, there is no pressure difference to support the column of fluid. The column exists because of capillarity. (Barometers must compensate for this effect.) The effect is greater in thin tubes because there is more surface area of tube per unit of weight of fluid: The force supporting fluid is proportional to the surface area of the tube, 2 r h, where h is the fluid height. The weight of the fluid in the tube is proportional to its volume, r 2 h. If the radius of the tube is doubled, the surface area doubles (and so does the force supporting the fluid), but the volume quadruples (as does the weight). Note: if the fluid were mercury, rather than rise it be depressed by the tube.
Capillary Action
Surface Tension
Ever wonder why water beads up on a car, or how some insects can walk on water, or how bubbles hold themselves together? The answer is surface tension: Because of cohesion between its molecules, a substance tends to contract to the smallest area possible. Water on a waxed surface, for example, forms round beads because in this shape, more weak bounds can be formed between molecules than if they were arranged in one flat layer. The drops of water are flattened, however, due to their weight. Cohesive forces are greater in mercury than in water, so it forms a more spherical shape. Cohesive forces are weaker in alcohol than in water, so it forms a more flattened shape.
continued
mercury
water
alcohol
Below the surface a molecule in fluid is pulled(cont.) in all directions by its neighbors with approximately equal strength, so the net force on it is about zero. This is not the case at the surface. Here the net force on a molecule is downward. Thus, the layer of molecules at the surface are slightly compressed. This surface tension is strong enough in water to support objects denser than the itself, like water bugs and even razorblades (so long as the blade is laid flat on the water so that more water molecules can help support its weight). Surface tension can be defined as the force per unit length holding a surface together. Imagine youre in a water balloon fight. You have one last balloon, but its got a slash in it, so you tape it up and fill it with water. The surface tension is the force per unit length the tape must exert on the balloon to hold it together. A bubble is similar to the water balloon. Rather than tape, the bubble is held together by the cohesive forces in the bubble.
Surface Tension
credits