Gas Laws: Pressure, Volume, and Hot Air: A Chemistry Lesson For 10 Grade Students Created by Warren Merkel

Gas Laws: Pressure, Volume,
and Hot Air

A Chemistry lesson for 10th
Grade Students created by
Warren Merkel
NEXT
Introduction
Welcome!
This interactive lesson will introduce
three ways of predicting the behavior of
gases: Boyles Law, Charles Law, and
the Ideal Gas Law. Never heard of
them? Dont worry thats the purpose of
this lesson!
PREVIOUS
NEXT
Navigation
Throughout this lesson, you will use buttons at
the bottom right corner of the page to navigate.
Takes you to the next page
Takes you to the previous page
Takes you to the Main Menu
PREVIOUS
NEXT
Main Menu
Lesson 1
Basic
Terminology
Lesson 3
Charles Law
Lesson 2
Boyles Law
Lesson 4
Ideal Gas Law
Review
Review of all four lessons
Lesson 1: Basic Terminology

This lesson reviews terms
used to describe the
properties and behavior of
gases.
MAIN
MENU
NEXT
Opening thoughts
Have you ever:
Seen a hot air balloon?
MAIN
MENU
PREVIOUS
NEXT
Opening thoughts
Have you ever:
Seen a hot air balloon?
Had a soda bottle spray all over you?
Baked (or eaten) a nice, fluffy cake?
These are all examples of gases at work!
MAIN
MENU
PREVIOUS
NEXT
Properties of Gases
You can predict the behavior of gases
based on the following properties:
Pressure
Volume
Amount (moles)
Temperature
Lets review each of these briefly

MAIN
MENU
PREVIOUS
NEXT

Pressure
Volume
Amount (moles)
Temperature
MAIN
MENU
PREVIOUS
NEXT
Pressure
Pressure is defined as the force the gas
exerts on a given area of the container in
which it is contained. The SI unit for
pressure is the Pascal, Pa.
If youve ever inflated a tire,
youve probably made a
pressure measurement in
pounds (force) per square inch
(area).
MAIN
MENU
PREVIOUS
NEXT

Pressure
Volume
Amount (moles)
Temperature
MAIN
MENU
PREVIOUS
NEXT
Volume
Volume is the three-dimensional space inside
the container holding the gas. The SI unit for
volume is the cubic meter, m3. A more common
and convenient unit is the liter, L.
Think of a 2-liter bottle of soda to get
an idea of how big a liter is.
(OK, how big two of them are)
MAIN
MENU
PREVIOUS
NEXT

Pressure
Volume
Amount (moles)
Temperature
MAIN
MENU
PREVIOUS
NEXT
Amount (moles)
Amount of substance is tricky. As weve already
learned, the SI unit for amount of substance is the mole,
mol. Since we cant count molecules, we can convert
measured mass (in kg) to the number of moles, n, using
the molecular or formula weight of the gas.
By definition, one mole of a substance contains
approximately 6.022 x 1023 particles of the
substance. You can understand why we use mass
and moles!
MAIN
MENU
PREVIOUS
NEXT

Pressure
Volume
Amount (moles)
Temperature
MAIN
MENU
PREVIOUS
NEXT
Temperature
Temperature is the measurement of heator how
fast the particles are moving. Gases, at room
temperature, have a lower boiling point than things
that are liquid or solid at the same temperature.
Remember: Not all substance freeze, melt or
evaporate at the same temperature.
Water will freeze at zero degrees Celsius.

However Alcohol will not freeze at this
temperature.
MAIN
MENU
PREVIOUS
NEXT
How do they all relate?

Some relationships of gases may be
easy to predict. Some are more subtle.
Now that we understand the factors that
affect the behavior of gases, we will
study how those factors interact.
MAIN
MENU
PREVIOUS
NEXT
How do they all relate?

Some relationships of gases may be
easy to predict. Some are more subtle.
Now that we understand the factors that
affect the behavior of gases, we will
study how those factors interact.
Lets go!
MAIN
MENU
PREVIOUS
Lesson 2: Boyles Law

This lesson introduces Boyles
Law, which describes the
relationship between pressure and
volume of gases.
MAIN
MENU
NEXT
Boyles Law
MAIN
MENU
PREVIOUS
volume
pressure
This law is named for Charles Boyle, who

studied the relationship between pressure,
p, and volume, V, in the mid-1600s.
Boyle determined that for the same amount
of a gas at constant temperature, results in
an inverse relationship:
when one goes up, the other
comes down.
NEXT
What does Boyles Law mean?

Suppose you have a cylinder with a piston in the
top so you can change the volume. The cylinder
has a gauge to measure pressure, is contained so
the amount of gas is constant, and can be
maintained at a constant temperature.
A decrease in volume will result in increased
pressure.
Hard to picture? Lets fix that!
MAIN
MENU
PREVIOUS
NEXT
Boyles Law at Work
Doubling the pressure reduces the volume by half. Conversely, when the
volume doubles, the pressure decreases by half.
MAIN
MENU
PREVIOUS
NEXT
Lesson 2 Complete!
This concludes Lesson 2 on Boyles Law!
Click the Main Menu button below, then

select Lesson 3 to learn about how
temperature fits in.
MAIN
MENU
PREVIOUS
Lesson 3: Charles Law

This lesson introduces Charles
Law, which describes the
relationship between volume and
temperature of gases.
MAIN
MENU
NEXT
Charles Law
MAIN
MENU
PREVIOUS
temperature
volume
This law is named for Jacques Charles, who

studied the relationship volume, V, and
temperature, T, around the turn of the 19th
century.
This defines a direct relationship:
With the same amount of gas he found that
as the volume increases the temperature
also increases. If the temperature
decreases than the volume also
decreases.
NEXT
What does Charles Law mean?

Suppose you have that same cylinder with a piston
in the top allowing volume to change, and a
heating/cooling element allowing for changing
temperature. The force on the piston head is
constant to maintain pressure, and the cylinder is
contained so the amount of gas is constant.
An increase in temperature results in increased
volume.
Hard to picture? Lets fix it (again)!
MAIN
MENU
PREVIOUS
NEXT
Charles Law at Work
As the temperature increases, the volume increases. Conversely, when

the temperature decreases, volume decreases.
MAIN
MENU
PREVIOUS
NEXT
Lesson 3 Complete!
This concludes Lesson 3 on Charles Law!

select Lesson 4 to put all the pieces
together with the Ideal Gas Law.
MAIN
MENU
PREVIOUS
Lesson 3 Complete!
This concludes Lesson 3 on Charles Law!

select Lesson 4 to put all the pieces
together with the Ideal Gas Law.
MAIN
MENU
PREVIOUS
Mission complete!
You have completed the lessons and

review. Congratulations!
You should now have a better
understanding of the properties of gases,
how they interrelate, and how to use them to
predict gas behavior.
Please click on the button below to reset the
lesson for the next student. Thanks!
Return to Title Slide

Gas Laws: Pressure, Volume, and Hot Air: A Chemistry Lesson For 10 Grade Students Created by Warren Merkel

Uploaded by

Copyright:

Available Formats

Gas Laws: Pressure, Volume, and Hot Air: A Chemistry Lesson For 10 Grade Students Created by Warren Merkel

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gas Laws: Pressure, Volume, and Hot Air: A Chemistry Lesson For 10 Grade Students Created by Warren Merkel

Uploaded by

Copyright:

Available Formats

Gas Laws: Pressure, Volume,

and Hot Air

Takes you to the Main Menu

Ideal Gas Law

Review of all four lessons

Lesson 1: Basic Terminology

Lets review each of these briefly

You can predict the behavior of gases

You can predict the behavior of gases

You can predict the behavior of gases

You can predict the behavior of gases

Water will freeze at zero degrees Celsius.

How do they all relate?

How do they all relate?

Lesson 2: Boyles Law

This law is named for Charles Boyle, who

What does Boyles Law mean?

Boyles Law at Work

Click the Main Menu button below, then

Lesson 3: Charles Law

This law is named for Jacques Charles, who

What does Charles Law mean?

Charles Law at Work

As the temperature increases, the volume increases. Conversely, when

Click the Main Menu button below, then

Click the Main Menu button below, then

You have completed the lessons and

You might also like