Eul (Hsupa)
Eul (Hsupa)
Eul (Hsupa)
Prepared By:
Sumon Kumar Biswas
Network Quality, ROBI
Contents:
HSPA Overview:
High Speed Packet Access (HSPA) is an amalgamation of two mobile telephony
protocols, High Speed Downlink Packet Access(HSDPA) and High Speed Uplink Packet
Access(HSUPA), that extends and improves the performance of existing 3G mobile
telecommunication networks utilizing the WCDMA protocols.
Why HSUPA?
Provides the Improvement in WCDMA uplink capabilities and performance in
terms of
Higher data rates
Reduced Latency
Improved System Capacity
It is a complement to HSDPA
High Speed Uplink Packet Access (HSUPA) is also known as Enhanced Uplink
Introduction of HSUPA:
HSUPA (UL)
The Shared resource is transmission power Shared resource is the amount of allowed
and code space, located at NodeB
uplink interference which depends on the
transmission power of multiple distributed
UE.
The scheduler and the transmission buffer
are located at the same place in NodeB
HSUPA (UL)
HSUPA Channels(1/3):
Introduces 5 new physical channels, 2 for uplink and 3 for downlink
Uplink channels:
E-DPDCH (E-DCH Dedicated Physical Data Channel)
Carries uplink user data = E-DCH traffic channel
SF 2-256, power controlled
Number of parallel E-DPDCHs is 1-4
E-DPCCH (E-DCH Dedicated Physical Control Channel)
Carries uplink control information
SF 256, power controlled
Carries E-DCH Transport Format Combination Identifier (E-TFCI),
Retransmission Sequence Number (RSN) and a single bit called
happy bit
EUL/HSUPA| 23rd Dec14 |
10
HSUPA Channels(2/3):
Downlink channels:
E-AGCH (E-DCH Absolute Grant Channel)
Carries absolute scheduling grants, SF 256
E-RGCH (E-DCH Relative Grant Channel)
Carries relative scheduling grants, SF 128
E-HICH (E-DCH HARQ Indicator Channel)
Carries ACKs/NACKs, SF 256
11
HSUPA Channels(3/3):
12
MAC-e
Between UE and Node B
Controls HARQs and scheduling
MAC-es
Between UE and SRNC
Reorders MAC-es Protocol Data Units (PDUs) in case of soft handover
Disassembles dedicated channels in RNC
13
14
HSUPA Features
Provides following new features:
Fast Node-B scheduling
Scheduling is moved from SRNC to Node B, enables faster response times
to constantly changing radio environments
Node B based scheduling keeps noise raise as high as possible -> each
user gets best possible uplink throughputs
Fast HARQ
Retransmission control moved from SRNC to Node B, enables faster
retransmission
Short TTI
New 2 ms TTI option to combine mandatory 10 ms TTI
Enables faster retransmissions -> reduced round trip times
Multicode transmission
Up to 4 parallel E-DPDCHs (2 x SF2 & 2 x SF4 = 5.76 Mbps uplink
throughput in Layer 1)
EUL/HSUPA| 23rd Dec14 |
15
16
17
18
19
20
HSUPA HARQ
21
22
23
24
25
26
Thank You
27