Biological Considerations of Orientation, Vertical and Horizontal Jaw Relations in Complete Denture-First Part

Biological considerations of
orientation, vertical and horizontal jaw

relations in complete denture- first part
Short Learning Objectives

1. Definition of orientation ,vertical and
Horizontal relation during fabrication
of complete dentures
2. Importance of recording
orientation ,vertical and Horizontal
relation during fabrication of
complete dentures
3. Method to record these relations.
JAW RELATION
It is defined as Any relation of the mandible to
the maxilla
Types:
1. Orientation jaw relation

2. Vertical jaw relation
3. Horizontal jaw relation
Orientation relations
Are those that orient
the mandible to the
cranium in such a way,
that, when mandible is
kept in its most
posterior position, the
mandible can rotate in
sagittal plane around an
imaginary transverse
axis passing through or
near the condyles.
Boucher 10th Ed.
ORIENTATIONCompetition
JAW RELATION :
To orient
to locate.
competitors, their
Price
The competitive
Thelandscape
position of the maxilla or mandible in the
skull is
recorded
using an instrument called
Provide
an overview
the face
bow.
B
of product
A
Face bow is used mainly when the vertical
strengths and
dimension
of occlusion is expected to Dbe
weaknesses
C
altered.
Position each
competitors
Use of
facebow minimizes occlusal
errors in
Performance
product against
the restoration as the casts will be oriented as
new product
close to as they are in the pateint.
Facebow
U shaped Caliper like instrument used to
record the relationship of the maxillary arch to
some anatomic reference point or points and
then transfer this relationship to an articulator.
Facebow (definition contd..)

It orients the dental cast in
same relationship to the
opening axis of articulator.
Customarily the anatomic
references are the
mandibular condyles
transverse horizontal axis
and one other selected
anterior point.
Also called Hinge bow,
Earbow, Kinematic
facebow. (GPT-8)
Types of facebow
Two basic types
Kinematic
And
- Arbitrary
- Facia type
- Earpiece type.
Parts of a facebow
Advantages of using face bow

.
It aids in securing the antero-posterior cast

position with relation to condyles of the
mandible.
It acts as an aid in the vertical positioning of

the cast on the articulator.
It assists in correctly transferring the inclination

of the occlusal plane to the articulator.
10
Record bases and occlusal rims
They simulate teeth and help in

establishing vertical dimension and centric
relation
Record bases should be retentive
For making phonetics test and for accurate jaw
relation record
If slightly loose, denture adhesive can be

used
If pronounced looseness final impression
has to be remade
Causes for poor retention

of record base
Poor adaptation of resin to cast

Over or under extension of borders
Excessive blockout for undercuts while
fabricating record base
Arbitrary adjustment of occlusal rims
Maxillary occlusal rim anterior height

22 mm
Mandibular occlusal rim anterior
height 18mm
Maxillary rim slightly facial to ridge
to compensate for residual ridge
resorption to support upper lip
Posteriorly the mandibular occlusal
rim is kept upto 2/3rd of retromolar
pad.
Clinical steps in recording JR

Properly contoured
maxillary occlusal rim
is inserted in the
patients mouth and
following are assessed
Lip support: Upper lip just supported enough.
Visibility of the rim: at
rest 0.5 1.0 mm of the
rim should be visible
Clinical steps in recording JR

Touches wet line of lower lip when pt says
F or V sounds
Ask patient to from Count 50 -60
Lips relaxed
Naso labial angle should be at 90 degree
Philtrum should be depressed slightly,
There should be no obliteration or
streching of philtrum
Orientation of occlusal
plane
Anteriorly the
maxillary occlusal
plane is adjusted to
be parallel to
interpupillary line.
Done using fox plane
Orientation of occlusal
plane
Posteriorly the occlusal plane is adjusted to

be parallel to alae-tragus line(campers
plane)
Campers plane: Imaginary line joining the
alae of the nose to the tip of the tragus
For mandibular occlusal rim

Anteriorly the occlusal plane should be
at the corner of the mouth
Posteriorly the occlusal rim should be at
the junction of anterior 2/3rd and
posterior 1/3rd of the retromolar pad.
Vertical Jaw Relation

The Vertical Jaw Relations are
expressed as the amount of
separation of the maxilla & mandible
under specified conditions.
The Vertical Jaw Relations can be
recorded in 2 positions:1) The vertical dimension at rest
position
2) The vertical dimension at occlusion.
Significance of Vertical Relation

Correct recording, transferring & incorporating the
vertical relations in the prosthesis, determines the
success of the prosthesis.
Failure to do so may compromise the success of
the prosthesis.
Significance of Vertical
Relation
Effects of excessively increasing the
vertical dimension:1) Discomfort teeth come into
contact sooner
than expected.
2) Trauma caused by constant
pressure on the
mucous membrane.
3) Loss of freeway space
Significance of Vertical
Relation
4) Clicking of teeth teeth are raised & the
opposing cusps frequently meet each
other
during speech & mastication.
5) Appearance over opening may cause
elongation of the face & at rest the
lips
are parted.
Effect of excessively decreasing the vertical

dimension:1) Inefficiency the force exerted with the teeth in
contact decreases considerably with
over closure.
2) Cheek biting the flabby cheek tend to become
trapped between the teeth & bitten
during mastication.
3) Appearance Closer approximation of nose to
chin, soft tissue sag & fall in, & the
lines on the face are deepened.
Effect of excessively decreasing the vertical dimension:-
4) Soreness at the corner of the mouth

(Angular cheilitis)
falling in of the corner of the mouth
beyond the vermilion border & the deep
fold thus formed become bathed in saliva.
This area becomes infected & sore.
5) Pain in TMJ caused due to strain of the
joint &
associated ligaments.
VERTICAL DIMENSION AT REST (VDR)

The distance between two selected points
measured when the mandible is in the
physiologic rest position.
The vertical dimension of rest is a
measurable distance, a repeatable reference
within an acceptable range & a useful
reference when establishing the vertical
dimension of occlusion.(VDO)
Factors to be considered for rest position as a reference are:-
1) The position of the mandible is influenced by gravity, so, mandibular

positions are postural.
2) Rest position is a relaxed position of the mandible.
3) Rest position is a position in space, which cannot be maintained for
definite periods of time.
4) Space between the teeth is essential when the mandible is at rest.
Method to record Vertical Dimension

Mark two points
One at tip of nose and one at tip
of chin.
Make patient sit upright
comfortable position in dental
chair with head unsupported.
Patient is to asked swallow and
relax and drop his shoulders.
Once dentist is sure

that patient relaxed, the
distance between two
points are measured.
This measurement is
for vertical at rest.
Usually 2 or 3 readings
are taken the average
is taken as reading. This
prevents error during
taking measurements.
The mandibular occlusal rim is inserted

and patient is asked to bite on the rims.
With patient in this occluding position,
readings at same two points marked
earlier is made.
This measurement is vertical at
occlusion.
Usually the VDO should be 2-4 mm less
than VDR.
FREEWAY SPACE
The difference between the occlusal vertical
dimension & the rest vertical dimension is the
INTEROCCLUSAL DISTANCE referred to as the
FREEWAY SPACE.
VD at occlusion = VD at rest - Freeway Space
.
VDO is the distance
measured between
two points when the
occluding members
are in contact.
Interocclusal Distance(free way space):- is

distance or gap existing between the upper
& lower teeth when the mandible is in the
physiological rest position. It is usually 24mm when observed in the 1st premolar
region.
If the interocclusal
space is greater then
4mm, the occlusal
vertical dimension
may be considered
too small.
If less then 2mm,
the dimension is
considered to be too
great.
Facial appearance
The rest position of the mandible affects the harmony
of the facial muscles. Observe your patient in the
established rest position.
- If the mandible is over closed, the lips and the
mandible appear protruded.
- If the mandible is held open from the rest position,
a strained appearance can be evident when the lips
are brought into contact.
Phonetics
Speech movements can also be used to verify the
vertical relations. The wax occlusal rims must contact
evenly prior to evaluating the vertical relation of
occlusion. The vertical relation of occlusion should now
be verified using phonetics.
1. Place both maxillary and mandibular record bases in
the patient's mouth. Ask the patient to wet the upper
lip with the tip of the tongue.
2. Ask the patient to say words with "S" sounds, such as
77 ,Sunset Strip, 66, count from 1-10, or from 60-70.
Observe from the profile and frontal view

that there is 1-2 mm of clearance between
the incisal edges of the occlusion rims in
the midline when the patient repeats the
words containing "S" sounds. The space
that exists when these words are said is
called theclosest speaking space.
If the occlusion rims contact when these
words are said, then wax on the
mandibular occlusion rim should be
removed until this clearance is obtained.
OTHER METHODS IN RECORDING VERTICAL:1) Pre-extraction Records:a) Profile Photographs:- Profile photographs are made & enlarged to a life size of
the patient.
- Measurements of anatomic landmarks on the
photographs are compared with measurements using the
same anatomic landmarks on the patients face.
-These measurements can be compared when the records
are made & again when the artificial teeth are tried in.
- The photographs should be made with the teeth in
maximum occlusion, as this position can be maintained
accurately for photographic purposes.
b) Profile Silhouettes:- The word silhouette means outline.

- Any further information like name, address,
date, colour & shape of the teeth can be
entered on the template & kept for future
reference.
Take home message.

Correct recording of Jaw relation
records are very essential for
successful fabrication of complete
denture. Failure to record properly
will ultimately lead to failure of
prosthesis.
Multiple Choice Questions

1. Free way space isA. VDR-VDO
B. VDO-VDR
C. VDR- IOD
D. VDO+IOD
2. Face bow helps to recordA. Vertical Jaw Relation

B. Horizontal Jaw Relation
C. Orientation Jaw Relation
D. Centric Relation
3. Which of the following is not the

type of Face bowA. Kinematic
B. Fascia
C. Ear Piece
D. Condyle
4. Average InterocclusaL distance isA. 1-2mm

B. 2-3mm
C. 1-3mm
D. 2-4mm
5. Face bow is helpful when change is

expected inA. Vertical Jaw Relation
B. Horizontal Jaw Relation
C. Orientation Jaw Relation
D. Centric Relation
6. Point taken during recording

orientation jaw relation areA. 3-2 anterior and 1 Posterior
B. 3- 1Anterior and 2 Posterior
C. 4-2 anterior and 2 Posterior
D. 2- 1Anterior and 1 Posterior

Biological Considerations of Orientation, Vertical and Horizontal Jaw Relations in Complete Denture-First Part

Uploaded by

Copyright:

Available Formats

Biological Considerations of Orientation, Vertical and Horizontal Jaw Relations in Complete Denture-First Part

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Biological Considerations of Orientation, Vertical and Horizontal Jaw Relations in Complete Denture-First Part

Uploaded by

Copyright:

Available Formats

Biological considerations of

orientation, vertical and horizontal jaw

Short Learning Objectives

1. Orientation jaw relation

Facebow (definition contd..)

Advantages of using face bow

It aids in securing the antero-posterior cast

It acts as an aid in the vertical positioning of

It assists in correctly transferring the inclination

Record bases and occlusal rims

They simulate teeth and help in

If slightly loose, denture adhesive can be

Causes for poor retention

Poor adaptation of resin to cast

Arbitrary adjustment of occlusal rims

Maxillary occlusal rim anterior height

Clinical steps in recording JR

Clinical steps in recording JR

Posteriorly the occlusal plane is adjusted to

For mandibular occlusal rim

Vertical Jaw Relation

Significance of Vertical Relation

Effect of excessively decreasing the vertical

Effect of excessively decreasing the vertical dimension:-

4) Soreness at the corner of the mouth

VERTICAL DIMENSION AT REST (VDR)

Factors to be considered for rest position as a reference are:-

1) The position of the mandible is influenced by gravity, so, mandibular

4) Space between the teeth is essential when the mandible is at rest.

Method to record Vertical Dimension

Method to record Vertical Dimension

Once dentist is sure

Method to record Vertical Dimension

The mandibular occlusal rim is inserted

Interocclusal Distance(free way space):- is

Observe from the profile and frontal view

b) Profile Silhouettes:- The word silhouette means outline.

Take home message.

Multiple Choice Questions

2. Face bow helps to recordA. Vertical Jaw Relation

3. Which of the following is not the

4. Average InterocclusaL distance isA. 1-2mm

5. Face bow is helpful when change is

6. Point taken during recording

You might also like