Transmission Media and Network Cabling: Transmission Medium Is The Physical Path Between The Transmitter and Receiver
Transmission Media and Network Cabling: Transmission Medium Is The Physical Path Between The Transmitter and Receiver
Transmission Media and Network Cabling: Transmission Medium Is The Physical Path Between The Transmitter and Receiver
Network Cabling
1
What is Cable? Transmission
Media
Transmission medium is the physical path
between the transmitter and receiver.
It is the Transmission medium through which
information usually moves from one network
device to another.
In some cases, a network will utilize only one
type of cable, other networks will use a variety of
cable types.
Understanding the characteristics of different
types of transmission media and how they relate
to other aspects of a network is necessary for the
development of a successful network.
2
Factors to Select
Transmission Media
Data Rate and Bandwidth
Distance and Attenuation
Interference Characteristics
Number of receivers
Cost - Remember cabling is a long
term investment!
3
Transmission Impairment
Impairments exist in all forms of data
transmission media
Analog signal impairments result in
random modifications that impair signal
quality
Digital signal impairments result in bit
errors (1s and 0s transposed)
4
Types of Media
Two major classes
Conducted or guided media
use a conductor such as a wire or a fiber optic
cable to move the signal from sender to receiver.
Energy is confined to the medium and guided by it
Wireless or unguided media
use radio waves of different frequencies and do
not need a wire or cable conductor to transmit
signals
Energy spreads out and is not confined
5
Guided Media Sub-types
Unshielded Twisted Pair (UTP) Cable
Shielded Twisted Pair (STP) Cable
Coaxial Cable
Fiber Optic Cable
6
Un-guided Media Sub-types
Terrestrial microwave transmission
Satellite transmission
Broadcast radio
Infrared
7
Twisted Pair Wires
Consists of two insulated copper wires
arranged in a regular spiral pattern to
minimize the electromagnetic
interference between adjacent pairs
Often used at customer facilities and
also over distances to carry voice as
well as data communications
Low frequency transmission medium
8
Twisted Pair
9
Twisted Pair Types
Two varieties
STP (shielded twisted pair)
the pair is wrapped with metallic foil or braid
to insulate the pair from electromagnetic
interference
UTP (unshielded twisted pair)
each wire is insulated with plastic wrap, but
the pair is encased in an outer covering
10
UTP (unshielded twisted pair)
The quality of UTP may vary from telephone-
grade wire to extremely high-speed cable. The
cable has four pairs of wires inside the jacket.
Each pair is twisted with a different number of
twists per inch to help eliminate interference
from adjacent pairs and other electrical
devices. The EIA/TIA (Electronic Industry
Association/Telecommunication Industry
Association) has established standards of UTP
and rated five categories of wire.
11
Categories of Unshielded
Twisted Pair
Type Use
Category 1 Voice Only (Telephone Wire)
Category 2 Data to 4 Mbps (LocalTalk)
Category 3 Data to 10 Mbps (Ethernet)
Category 4 Data to 20 Mbps (16 Mbps Token
Ring)
Category 5 Data to 100 Mbps (Fast Ethernet)
12
Categories of Unshielded
Twisted Pair
Category 3 UTP
data rates of up to 16mbps are
achievable
Category 5 UTP
data rates of up to 100mbps are
achievable
more tightly twisted than Category 3
cables
more expensive, but better performance
13
Differences between UTP
Types
One difference between the different
categories of UTP is the tightness of
the twisting of the copper pairs.
The tighter the twisting, the higher
the supported transmission rate and
the greater the cost per foot.
Buy the best cable you can afford.
14
Benefits of UTP
Inexpensive and readily available
Flexible and light weight
Easy to work with and install
15
Disadvantages of UTP
Susceptibility to interference and
noise
Attenuation problem
For analog, repeaters needed every 5-
6km
For digital, repeaters needed every 2-
3km
Relatively low bandwidth (3000Hz)
16
17
Twisted Pair - Applications
Telephone network
Between house and local exchange
(subscriber loop)
Within buildings
To private branch exchange (PBX)
For local area networks (LAN)
10Mbps or 100Mbps
18
Unshielded Twisted Pair
Connector
The standard connector for unshielded
twisted pair cabling is an RJ-45 connector.
This is a plastic connector that looks like a
large telephone-style connector (See
figure). A slot allows the RJ-45 to be
inserted only one way. RJ stands for
Registered Jack, implying that the
connector follows a standard borrowed
from the telephone industry. This standard
designates which wire goes with each pin
inside the connector.
19
The RJ-45 Connector
20
Shielded Twisted Pair (STP)
Cable
A disadvantage of UTP is that it may be
susceptible to radio and electrical frequency
interference (RFI, EFI).
Shielded twisted pair (STP) is suitable for
environments with electrical interference;
however, the extra shielding can make the
cables quite bulky.
Shielded twisted pair is often used on
networks using Token Ring topology.
More expensive, harder to work with.
21
22
Coaxial Cable
Coaxial cabling has a single copper
conductor at its center. A plastic layer
provides insulation between the center
conductor and a braided metal shield (See
figure). The metal shield helps to block any
outside interference from fluorescent lights,
motors, and other computers.
23
Coaxial Cable (or Coax)
Bandwidth of up to 400 MHz
Has an inner conductor surrounded by
a braided mesh
Both conductors share a common
center axial, hence the term co-
axial
24
Coax Layers
outer jacket
(polyethylene)
shield
(braided wire)
insulating material
copper or aluminum
conductor
25
Coax Advantages
Higher bandwidth
400 to 600MHz
up to 10,800 voice conversations
Can be tapped easily (pros and cons)
Much less susceptible to interference
than twisted pair
greater cable lengths between
network devices than twisted pair
cable.
26
Coax Disadvantages
High attenuation rate makes it
expensive over long distance
Bulky - coaxial cabling is difficult to
install
27
Coaxial Cable Applications
Most versatile medium
Television distribution
Ariel to TV
Cable TV
Long distance telephone transmission
Can carry 10,000 voice calls
simultaneously
Being replaced by fiber optic
Short distance computer systems links
Local area networks
28
Thin Coax
Thin coaxial cable is also referred to as
thinnet. 10Base2 refers to the
specifications for thin coaxial cable
carrying Ethernet signals. The 2 refers
to the approximate maximum segment
length being 200 meters. In actual fact
the maximum segment length is 185
meters. Thin coaxial cable is popular in
school networks, especially linear bus
networks.
29
Thick Coax
Thick coaxial cable is also referred to as
thicknet. 10Base5 refers to the specifications
for thick coaxial cable carrying Ethernet
signals. The 5 refers to the maximum segment
length being 500 meters. Thick coaxial cable
has an extra protective plastic cover that helps
keep moisture away from the center
conductor. This makes thick coaxial a great
choice when running longer lengths in a linear
bus network. One disadvantage of thick
coaxial is that it does not bend easily and is
difficult to install.
30
Coaxial Cable Connectors
The most common type of
connector used with coaxial
cables is the Bayone-Neill-
Concelman (BNC) connector
(See figure). Different types of
adapters are available for
BNC connectors, including a
T-connector, barrel connector,
and terminator. Connectors on
the cable are the weakest
points in any network. To help
avoid problems with your
network, always use the BNC
connectors that crimp, rather
than screw, onto the cable.
31
Fiber Optic Cable
Fiber optic cabling consists of a center
glass core surrounded by several layers of
protective materials. It transmits light
rather than electronic signals, eliminating
the problem of electrical interference. This
makes it ideal for certain environments that
contain a large amount of electrical
interference. It has also made it the
standard for connecting networks between
buildings, due to its immunity to the effects
of moisture and lighting.
32
Fiber Optic Cable
Fiber optic cable has the ability to transmit
signals over much longer distances than
coaxial and twisted pair. It also has the
capability to carry information at vastly
greater speeds. This capacity broadens
communication possibilities to include services
such as video conferencing and interactive
services. The cost of fiber optic cabling is
comparable to copper cabling; however, it is
more difficult to install and modify. 10BaseF
refers to the specifications for fiber optic cable
carrying Ethernet signals.
33
Fiber Optic Cable
relatively new transmission medium
used by telephone companies in place
of long-distance trunk lines
also used by private companies in
implementing local data
communications networks
require a light source with injection
laser diode (ILD) or light-emitting
diodes (LED)
34
Fiber Optic Layers
consists of three concentric sections
35
Optical Fiber
36
37
Facts About Fiber Optic
Cables
Facts about fiber optic cables:
Outer insulating jacket is made of Teflon
or PVC.
Kevlar fiber helps to strengthen the cable
and prevent breakage.
A plastic coating is used to cushion the
fiber center.
Center (core) is made of glass or plastic
fibers.
38
Optical Fiber - Transmission
Characteristics
Act as wave guide for 1014 to 1015 Hz
Portions of infrared and visible spectrum
Light Emitting Diode (LED)
Cheaper
Wider operating temp range
Last longer
Injection Laser Diode (ILD)
More efficient
Greater data rate
Wavelength Division Multiplexing
39
Fiber Optic Types
multimode step-index fiber
the reflective walls of the fiber move the
light pulses to the receiver
multimode graded-index fiber
acts to refract the light toward the center
of the fiber by variations in the density
single mode fiber
the light is guided down the center of an
extremely narrow core
40
Optical Fiber Transmission
Modes
41
Fiber Optic Signals
42
Fiber Optic Advantages
Greater capacity - data rates of hundreds of
Gbps
Smaller size and lighter weight
Lower attenuation
Electromagnetic isolation - immunity to
environmental interference and highly
secure due to tap difficulty and lack of signal
radiation
Greater repeater spacing - 10s of km at least
43
Fiber Optic Disadvantages
Expensive over short distance
Requires highly skilled installers
Adding additional nodes is difficult
44
Fiber Optic Connector
The most common
connector used with
fiber optic cable is an
ST connector. It is
barrel shaped, similar
to a BNC connector. A
newer connector, the
SC, is becoming more
popular. It has a
squared face and is
easier to connect in a
confined space.
45
Wireless (Unguided Media)
Transmission
Transmission and reception are achieved
by means of an antenna
Directional
transmitting antenna puts out focused
beam
transmitter and receiver must be aligned
Omnidirectional
signal spreads out in all directions
can be received by many antennas
46
Wireless (Unguided Media)
Frequencies
Three general ranges of frequencies
2GHz to 40GHz microwave frequencies
Microwave
Highly directional
Point to point
Satellite
30MHz to 1GHz
Omnidirectional
Broadcast radio
3 x 1011 to 2 x 1014
Infrared
47
Propagation of Radio
Frequencies
48
Propagation of Radio
Frequencies (continued)
49
Terrestrial
Microwave Transmission
Uses the radio frequency spectrum,
commonly from 2 to 40 GHz
Transmitter is a parabolic dish, mounted as
high as possible
Used by common carriers as well as by
private networks
Requires unobstructed line of sight between
source and receiver
Curvature of the earth requires stations
(called repeaters) to be ~30 miles apart
50
Terrestrial Microwave
Transmission
Distance between antennas:
d = 7.14 (Kh)1/2 , d = distance in km,
h is antenna height in meters, K =
constant = 4/3
51
Terrestrial Microwave
Applications
Long-haul telecommunications service
for both voice and television
transmission
Short point-to-point links between
buildings for closed-circuit TV or a
data link between LANs
52
Terrestrial Microwave
Communications
53
Microwave Transmission
Advantages
Co cabling needed between sites
Wide bandwidth
Multi-channel transmissions
Used for long haul or high capacity
short haul
Requires fewer amplifiers and
repeaters
54
Microwave Transmission
Disadvantages
Line of sight requirement
Expensive towers and repeaters
Subject to interference such as
passing airplanes and rain
Frequency bands are regulated
55
Satellite
Microwave Transmission
A microwave relay station in space
Can relay signals over long distances
Geostationary satellites
remain above the equator at a height of
22,300 miles (geosynchronous orbit)
travel around the earth in exactly the
time the earth takes to rotate
56
57
Satellite Transmission Links
Earth stations communicate by
sending signals to the satellite on an
uplink
The satellite then repeats those
signals on a downlink
The broadcast nature of the downlink
makes it attractive for services such
as the distribution of television
programming
58
Satellite Transmission
Process
satellite
transponder
dish dish
22,300 miles
59
Satellite Transmission
Applications
Television distribution
a network provides programming from a
central location
direct broadcast satellite (DBS)
Long-distance telephone transmission
high-usage international trunks
Private business networks
60
Principal Satellite
Transmission Bands
C band: 4(downlink) - 6(uplink) GHz
the first to be designated
Ku band: 12(downlink) -14(uplink)
GHz
rain interference is the major problem
Ka band: 19(downlink) - 29(uplink)
GHz
equipment needed to use the band is still
very expensive
61
Satellite Advantages
Can reach a large geographical area
High bandwidth
Cheaper over long distances
62
Satellite Disadvantages
High initial cost
Susceptible to noise and interference
Propagation delay (0.25 sec) -
requires sophisticated flow control
63
64
65
Infrared
Transceivers operate with line of sight or
reflection from light-colored surface
Modulate noncoherent infrared light
e.g. TV remote control, IRD port
Advantages
Does not penetrate walls - enhanced security
No licensing of frequencies
Disadvantages
Operate on limited distances
66
67
Summary
68