DISEASE FREQUENCY

BUDI UTOMO
DEPARTEMEN IKM-KP
FK UNAIR
 MEASURES OF RISK
– RATIO
– PROPORTION
– INCIDENCE PROPORTION (ATTACK RATE)
– INCIDENCE RATE
– PREVALENCE
– MORTALITY RATE
 FREQUENCY MEASURES
Common frequency measures are ratios, proportions, and rates. All three frequency
measures have the same basic form:
𝑛𝑢𝑚𝑒𝑟𝑎𝑡𝑜𝑟
𝑥 10𝑛
𝑑𝑒𝑛𝑜𝑚𝑖𝑛𝑎𝑡𝑜𝑟
Recall that:
100 = 1 (anything raised to the 0 power equals 1)
101 = 10 (anything raised to the 1st power is the value itself)
102 = 10 x 10 = 100
103 = 10 x 10 x 10 = 1,000
 RATIO
DEFINITION OF RATIO
A ratio is the relative magnitude of two quantities or a comparison of any two
values. It is calculated by dividing one interval or Ratio-scale variable by the other.
The numerator and denominator Need not be related
Method for calculating a ratio
 PROPERTIES AND USES OF RATIOS
Ratios are common descriptive measures, used in all fields. In
epidemiology, ratios are used as both descriptive measures and as analytic
tools.
As an analytic tool, ratios can be calculated for occurrence of illness, injury,
or death between two groups.
A city of 4,000,000 persons has 500 clinics. Calculate the ratio of clinics per
person. The answer is ??
Delaware’s infant mortality rate in 2001 was 10.7 per 1,000 live births. New
Hampshire’s infant mortality rate in 2001 was 3.8 per 1,000 live births.
Calculate the ratio of the infant mortality rate in Delaware to that in New
Hampshire.
 A commonly used epidemiologic ratio: death-to-case ratio

Death-to-case ratio is the number of deaths attributed to a particular

disease during a specified period divided by the number of new cases of
that disease identified during the same period.
It is used as a measure of the severity of illness: the death-to-case ratio for
rabies is close to 1 (that is, almost everyone who develops rabies dies from
it), whereas the death-to-case ratio for the common cold is close to 0
In the united states in 2002, a total of 15,075 new cases of tuberculosis
were reported.3 during the same year, 802 deaths were attributed to
tuberculosis.
PROPORTION
Definition of proportion
A proportion is the comparison of a part to the whole. It is a type of ratio in which the
numerator is included in the denominator
Method for calculating a proportion

For a proportion, 10𝑛 is usually 100 (or n = 2) and is often expressed as a percentage.
Calculate the proportion of men in the NHANES follow-up study who were
diabetics.
Numerator = 189 diabetic men
Denominator = total number of men = 189 + 3,151 = 3,340
Proportion = (189 / 3,340) x 100 = 5.66%
In epidemiology, proportions are used most often as descriptive measures.
A proportion can be expressed as a fraction, a decimal, or a percentage
Proportions can easily be converted to ratios.
If the numerator is the number of women (179) who attended a clinic and
the denominator is all the clinic attendees (341), the proportion of clinic
attendees who are women is 179 / 341

A specific type of epidemiologic proportion: proportionate mortality

RATE
A rate is a measure of the frequency with which an event occurs in a
defined population over a specified period of time, rates are particularly
useful for comparing disease frequency in different locations, at different
times. That is, a rate is a measure of risk.

Rate means how fast something is happening or going, A rate describes

how quickly disease occurs in a population.

For example, 70 new cases of breast cancer per 1,000 women per year,
This rate is an incidence rate
Attack rate is the proportion of the population that develops illness during
an outbreak
For example, 20 of 130 persons developed diarrhea after attending a picnic.
(An alternative and more accurate phrase for attack rate is incidence
proportion.)
A prevalence rate is the proportion of the population that has a health
condition at a point in time. For example, 70 influenza case-patients in
march 2005 reported in county A.
A case-fatality rate is the proportion of persons with the disease who die
from it.
MORBIDITY FREQUENCY MEASURES
The number of persons who are ill, it can also be used to describe the
periods of illness that these persons experienced, or the duration of these
illnesses. Measures of morbidity frequency characterize the number of
persons in a population who become ill (incidence) or are ill at a given time
(prevalence).
 Incidence
a “motion picture” – describes what is happening in
a population. Incidence is defined as the number
of new cases divided by the population at risk
over time.
Incidence therefore includes three components:
1. New cases
2. Population at risk.
3. Interval of time.
Note that:
• Incidence involves the passage of time.
 Incidence rate or person-time rate

• Incidence rate or person-time rate is a measure of incidence that

incorporates time directly into the denominator. A person-time rate is
generally calculated from a long-term cohort follow-up study, wherein
enrollees are followed over time and the occurrence of new cases of
disease is documented.
• Method for calculating incidence rate
 h.w : Calculate person time rate-nya
• Investigators enrolled 2,100 women in a study and followed
them annually for four years to determine the incidence rate of
heart disease. After one year, none had a new diagnosis of
heart disease, but 100 had been lost to follow-up. After two
years, one had a new diagnosis of heart disease, and another
99 had been lost to follow-up. After three years, another seven
had new diagnoses of heart disease, and 793 had been lost to
follow-up. After four years, another 8 had new diagnoses with
heart disease, and 392 more had been lost to follow-up.
Hw. Hitung person time rate untuk wanita non diabetik
• The diabetes follow-up study included 218 diabetic women
and 3,823 nondiabetic women. By the end of the study, 72 of
the diabetic women and 511 of the nondiabetic women had
died. The diabetic women were observed for a total of 1,862
person years; the nondiabetic women were observed for a
total of 36,653 person years. Calculate the incidence rates of
death for the diabetic and non-diabetic women.
 Prevalence
a kind of “still life” picture – is the most basic of epidemiologic
measures.
It is defined as the number of cases divided by the population-
at-risk.
Prevalence has three components:
1. Existing cases
2. Population “at risk” to have the condition
3. Point (or sometimes a period) in time to which the prevalence
applies
Relationship of incidence and prevalence
 Relationship between Prevalence and Incidence
• In a stationary population, in which there is no migration of
cases or non cases, if the incidence, prevalence, and duration
of a condition remain constant then the number of new cases
that occur must be balanced by the number of exiting cases
that leave the population through death or cure.
• In such a situation, the prevalence is a function of incidence
and the average duration of being a case.

For a rare disease, prevalence ≈ incidence × duration

P= I X D
 Cumulative incidence (CI), a.k.a. Incidence
proportion (IP)
The definition of CI is based on the following “ideal” scenario:
1. A population known to be free of the outcome is identified at
a point in time (a cohort);
2. All members of the cohort are at risk of experiencing the event
or outcome (at least once)
for the entire period of time;
3. All first events or outcomes for each person are detected.
Calculating cumulative incidence
Calculating cumulative incidence
Some things to note about CI:
1. The period of time must be stated (e.g., “5-year CI”) or be clear
from the context (e.g., acute illness following exposure to
contaminated food source);
2. Since CI is a proportion, logically each person can be counted as a
case only once, even if she or he experiences more than one event;
3. As a proportion, CI can range only between 0 and 1 (inclusive),
which is one reason it can be used to directly estimate risk (the
probability of an event).
Sample calculation:

• 200 people free of chronic disease X observed over 3 years, 10

cases of X develop

• 3-year CI = 10 cases / 200 people = 10/200 = .05

• Thus, the 3-year risk for one of the 200 people to develop disease
X, conditional on not dying from another cause, is estimated as
0.05 or 5%.
Incidence proportion or risk

Synonyms for incidence proportion

• Attack rate
• Risk
• Probability of developing disease
• Cumulative incidence

• Definition of incidence proportion

• Incidence proportion is the proportion of an initially disease-free
population that develops disease, becomes injured, or dies during a
specified (usually limited) period of time. Synonyms include attack rate,
risk, probability of getting disease, and cumulative incidence. Incidence
proportion is a proportion because the persons in the numerator, those who
develop disease, are all included in the denominator (the entire
population).
 • Method for calculating incidence proportion (risk)

In the study of diabetics, 100 of the 189 diabetic men died during the 13-year
follow-up period. Calculate the risk of death for these men.
Numerator = 100 deaths among the diabetic men
Denominator = 189 diabetic men
10n = 102 = 100
Risk = (100 / 189) x 100 = 52.9%
 Commonly used CI indicator…..
Attack Rate
•In the outbreak setting, the term attack rate is often used as a
synonym for risk.
•Risk of getting the disease during a specified period, such as the
duration of an outbreak.
•AR does not explicitly specify the time interval because for many
food-borne disease outbreaks we know that most cases occur within
a few hours or a few days after the exposure
Overall attack rate
–Total number of new cases divided by the total population

Food-specific attack rate

–number of persons who ate a specified food and became ill
divided by the total number of persons who ate that food
Secondary attack rate
A secondary attack rate is sometimes calculated to document the
difference between community transmission of illness versus transmission
of illness in a household, barracks, or other closed population. It is
calculated as:
 Uses of SAR
attempts to measure the degree of spread of a disease within a
group that has been exposed to an agent by contact with a
primary case
• Used in evaluating the efficacy of a prophylactic agent
• Also used to determine whether a disease of unknown etiology
is communicable and thus may indicate the possible etiological
role of a transmissible agent
• Consider an outbreak of shigellosis in which 18 persons in 18
different households all became ill. If the population of the
community was 1,000, then the overall attack rate was 18 /
1,000 x 100% = 1.8%. One incubation period later, 17 persons
in the same households as these “primary” cases developed
shigellosis. If the 18 households included 86 persons, calculate
the secondary attack rate.
 Incidence density (ID)

Note that:
• ID is a relative rate, not a proportion.
The units of time must be stated, since otherwise the
numeric value is ambiguous (e.g., 15 cases/100,000 person-
years = 15 cases/1,200,000 person-months).*
 Two complementary measures of incidence: CI and ID

Cumulative incidence (CI)

1. increases with period of observation (i.e., it is “cumulative”)
2. has problems with:
- multiple events in one subject
- differing follow-up times for subjects
But
3. it is not necessary to know exact time of onset of the disease
4. directly estimates risk
Incidence density (ID)
1. suggests ability to extrapolate over time - “duration free”;
2. accommodates:
- multiple events in one subject
- different follow-up times for subjects
3. does not require a cohort to estimate or interpret
4. may be more appropriate for etiologic inference
 Prevalence
• In the medical and public health literature, the word
prevalence is often used in two ways:
• –Point prevalence
• –Period prevalence
 Point prevalence

•Prevalence measured at a particular point in time.

•It is the proportion of persons with a particular disease or
attribute on a particular date
 Period prevalence

•Prevalence measured over an interval of time.

•It is the proportion of persons with a particular disease or
attribute at any time during the interval.
• the incidence of the disease during the seven-year period is the number of new events
(3) divided by the sum of the lengths of time at risk of getting the disease for the
population (33 person-years), i.e. 9.1 cases per 100 person years;
• the cumulative incidence is the number of new events in the population at risk (3)
divided by the number of people in the same population free of the disease at the
beginning of the period (7), i.e. 43 cases per 100 persons during seven years
• the average duration of disease is the total number of years of disease divided by the
number of cases, i.e. 10/3 = 3.3 years;

• the prevalence depends on the point in time at which the study takes place; at the
start of year 4, for example, it is the ratio of the number of people with the disease (2)
to the number of people in the population observed at that time (6), i.e. 33 cases per
100 persons. The formula P= I X D for prevalence would give an estimated average
prevalence of 30 cases per 100 population (9.1 × 3.3);
• case fatality is 33% representing 1 death out of 3 diagnosed cases.