ZXCTN 6110 Packet Transport Product

Hardware Introduction
Contents

 ZXCTN 6110 （ V1.1 ） Product Hardware

Introduction
 Product Overview
 System Structure
 Board Function
 Performance and index
 Position of ZXCTN 6110 in the Transmission
Network
Access Layer Convergence Layer Core Layer

CTN 6200
CTN 6110
NodeB

CTN 6300 CTN 9004

NodeB CTN 6200 MSC

CTN 6100 RNC
CTN 9008
BTS MGW

MSTP Access
Ring SGSN
BSC
NodeB
MSTP Convergence Layer

BTS

 ZXCTN 6110 is a carrier-class multi-service carrier product introduced by ZTE , orienting the packet transport.
 It focuses on bearing and transmission of integrated mobile backhaul and multi-service network, which can meet
transmission requirements of various access layer services.
ZXCTN 6110 brief introduction
 Dimensions: 482.6mm(W) X 43.6mm(H) X 225.0mm(D)
 Satisfies the mounting requirements of subrack in the IEC standard cabinet (19–inch
cabinet) or ETS standard cabinet (21–inch cabinet)
 Mounting mode. ： wall-mounted mounting mode 、 cabinet 、 desk mounting
mode.
 The system adopts the centralized architecture.
 Subrack adopts the crosswise structure: main control board ＋ service board
 Multi-service bearing through PWE3 ： support TDM 、 ATM/IMA 、 FE 、 GE service
interfaces
 Switch capacity （ dual-direction ） : 6Gbps
 Packet transmit rate ： 7.44Mpps
 Equipment power consumption : ≤ 45W
 All GE interface and FE interface Provide synchronization Ethernet clock.
 Earthquake-proof level ： safe under level-9 earthquake

1U
ZXCTN 6110 Application Scenario
 As the equipment on the access layer, ZXCTN
6110 is applicable to various solutions and
corresponding application scenarios ：
 Access and transport of mobile base station service
 Access and transport of large client private line service
 Access and transport of Next Generation Network
(NGN) service
 Access and transport of Internet Protocol Television
(IPTV) service
 Access and transport of Video On Demand (VOD)/Voice
over IP (VoIP) service
 Access and transport of mass client Internet service
Contents

 ZXCTN 6110 （ V1.1 ） Product Hardware

Introduction
 Product Overview
 System Structure
 Board Function
 Performance and index
System Software Structure
ZTE PTN Product Structure
t
en
Control plane gem
a
E1/STM-N an ne
Data plane M la
p
TDM PWE3 Packets E1/STM-N
exchange core

IMA E1/ATM STM-N

ATM PWE3
GE/10GE

FE/GE/10GE
ETH PWE3

Clock/time sync
（ Ethernet clock sync, 1588 time sync ）

 Three planes of data, control, and management are independently designed.

 Packet exchange core, multi-service bearing
 Supporting clock/time sync satisfies clock/time requirements in various types of
application environments.
ZXCTN 6110 Subrack

1. Mounting flange
2. Fan area
3. Power supply board area
4. Grounding terminal of subrack protection ground
5. Antistatic wrist strap jack
6. Main Control board area
7. Service board area

 ZXCTN 6110 subrack adopts the crosswise and horizontal plug-in structure;
 Each subrack provides four slots: one main control board slot, two service board slots, and one power
supply board slot;
 A service board is installed on the main board socket as the sub-board. Compared with the traditional
backplane connection mode, a service board nests on the main control board;
 Satisfies the mounting requirements of Subrack in the IEC standard cabinet (19–inch cabinet) or ETS
standard cabinet (21–inch cabinet) ；
 Can be mounted in cabinet 、 wall-mounted mounting mode and desk mounting mode ；
Board Slots in Subrack
 POWER ： one power supply board slot  Solt3 ： one main control board slot
 FAN: beside the power supply board  Solt1~Solt2 ： two interface boards slot

Slot No. Access Capacity Pluggable Board

Slot1 3.5GE SMC
Slot2 、 Slot 1GE E1TE 、 FE×4 、 GPC
3
Slot4 - PWA 、 PWB
Functional boards plugged into specific slots;
while service boards into flexible slots.
ZXCTN 6110 Board Naming Lists

Board ID Meaning of Board ID

System Main Board C with Ten Ethernet,
SMC2MHxTE100
2MHz Clock Interfaces and Synchronous Multi-service Transport
ProcessingFunction
System Main Board C with Ten Ethernet,
SMC2MBxTE100 2MBit Clock Interfaces and Synchronous Multi-service Transport
ProcessingFunction
E1TE-75 Electrical Tributary Emulation board of 75Ω E1
E1TE-120 Electrical Tributary Emulation board of 120Ω E1
GPC GPS PTP Clock
FE×4 Fast Ethernet interface
PWA -48V Power board A
PWB 110V/220V Power board B
Relationship Between Boards and Slots

Board Type Board Occupied Slot Number Slot NO.

Main control board SMC 1 Slot1
E1TE 1 Slot2 、 Slot3
Interface board
FEx4 1 Slot2 、 Slot3
(sub-board)
GPC 1 Slot2 、 Slot3
PWA 1 Slot4
Power supply board
PWB 1 Slot4
Contents

 ZXCTN 6110 （ V1.1 ） Product Hardware

Introduction
 Product Overview
 System Structure
 Board Function
 Performance and index
Main Control Board SMC
 Functions
 As the core of the equipment, SMC board implements
service switching and equipment control.
 SMC board consists of the following functional units:

CPU unit

Packet switching unit

Ethernet processing unit

Ethernet OAM unit

Clock unit

Power supply unit
Main Control Board SMC
 Front Panel

1. Ring-trip button (B.OFF) 10. USB interface

2. Reset button (N.RST) 11. EMS interface (Qx)
3. Equipment alarm indicator (ALM) 12. Local craft terminal interface (LCT)
4. Board running indicator (RUN) 13. Alarm output and equipment debugging interface (OUT)
5. GE Ethernet optical interface 14. Alarm input interface or time interface (IN/GPS2)
6. GE/FE Ethernet optical interface 15. Time interface (GPS1)
7. FE Ethernet optical interface 16. Fast Ethernet electrical interface (FE)
8. BITS interface (Rx) 17. Grounding terminal of equipment protection ground
9. BITS interface (Tx) 18. Antistatic wrist strap jack (ESD)
Main Control Board SMC
 Interface
Interface Description
GE9 、 GE10 Two GE Ethernet optical interfaces, adopting pluggable SFP optical module.
BITS interface Receiving/transmitting interface of BITS clock signals,
（ Rx 、 Tx ） adopting non-balanced CC4 interface.
IN/GPS2, GPS1 Time interface with the interface type of RJ45. It provides
one channel of input or output of 1PPS and TOD signals.
IN/GPS2 Alarm input interface with the interface type of RJ45. It
provides four channels of external alarm signal input.
OUT Alarm output and equipment debugging interface with interface type of RJ45.It
provides two channels of alarm output, which can be divided into critical alarm and
major/minor alarm. It also works as the equipment debugging interface for the
engineering personnel during the equipment commissioning.
LCT Local craft terminal interface with the interface type of RJ45.
Qx EMS interface with the interface type of RJ45.
FEn （ n ： 5~8 ） Four 10 M/100 M fast Ethernet electrical interfaces with the interface type of RJ45.
Main Control Board SMC
 Board Indicator Status
Indicator Status
Working Status
RUN (Green) MAJ/MIN (Red) STA (Yellow)
The board runs normally Flash 0.5 times
OFF -
without alarm. /second regularly
The board runs normally Flash 0.5 times
ON -
with alarm. /second regularly
Clock Locking (Normal Flash 1 times/second
- -
Tracing) regularly
Clock Hold Over - - ON
Flash 5 times/second
Clock Fast Capture - -
regularly
Flash 0.5 times/second
Clock Free Oscillation - -
regularly

 “Flashes (0.5 time/second)” means that the indicator is on for one second and off for another one second.
 “Flashes (1 time/second)” means that the indicator is on for half a second and off for another half a second.
 “Flashes (5 times/second)” means that the indicator is on for 0.1 second and off for another 0.1 second.
Main Control Board SMC
 GE Corresponding Relationship between Optical
Interface Indicators and Interface Statuses

Indicator Status
Working Status
LA (Green) SD (Green)
Interface receives optical signals
OFF ON
(Connectionless).

Interface doesn't receive optical signals. OFF OFF

Interface is in connect status. ON ON
Interface is connectionless. OFF -
Interface is sending/receiving packets. Flash 5 times/second regularly ON

 “-” indicates uncertain status.

 “Flashes (5 times/second)” means that the indicator is on for 0.1 second and off for another 0.1 second.
Main Control Board SMC
 FE Corresponding Relationship between Optical
Interface Indicators and Interface Statuses

Indicator Status
Working Status
LA (Yellow) SP (Green)
Interface is in connect status. ON ON
Interface is connectionless. OFF OFF
Interface is sending/receiving packets. Flash 5 times/second regularly ON
The rate on interface is100Mbps. - ON
The rate on interface is10Mbps. - OFF

 “-” indicates uncertain status.

 “Flashes (5 times/second)” means that the indicator is on for 0.1 second and off for another 0.1 second.
E1 Electrical Tributary Emulation Board
E1TE （ E1TE-75/E1TE-120 ）
 Front Panel
 E1TE-75 and E1TE-120 have the same front panel ，
which are both identified as E1TEx16.
3 4

2
5

1. Mounting hole
2. E1 electrical interface (channel 1 – channel 8)
3. Board running indicator (RUN)
4. Board alarm indicator (ALM)
5. E1 electrical interface (channel 9 - channel 16)
Gigabit Ethernet Interface Board GEx1
 Functions
 GEx1 board is a GE interface board. It provides one GE
optical interface with the rate of 1000 Mbit/s.
 The detailed functions of GEx1 board are described as
follows ：

Supports configuration for the interface rate.

Supports digital diagnosis for the optical interface.

Supports automatic laser shutdown of the optical interface.

Supports synchronous Ethernet.

The GE interface supports link aggregation.
Gigabit Ethernet Interface Board GEx1
 Front Panel

1. Mounting hole
2. Board running indicator (RUN)
3. Board alarm indicator (ALM)
4. GE Ethernet optical interface
5. Running indicator of Ethernet optical interface (LA)
6. Signal indicator of Ethernet optical interface (SD)
FE Interface Board FEx4
 Front Panel

1. Captive fastener
2. Board running indicator (RUN)
3. Board alarm indicator (ALM)
4. Ethernet optical interface （ RXn/TXn ， n=1 、 2 、 3 、 4 ）
5. Running indicator of Ethernet optical interface （ LAn ， n=1 、 2 、 3 、 4 ）
6. Signal indicator of Ethernet optical interface （ SDn ， n=1 、 2 、 3 、 4 ）
DC Power Supply Board PWA
 Front Panel
1. Mounting hole
2. Channel A power supply indicator
3. Channel B power supply indicator
4. Channel A DC power socket
5. Power supply switch
6. Channel B DC power socket
7. Board alarm indicator (ALM)
8. Board running indicator (RUN)

 Interface
Item Description
Channel A DC Active external power interface ; Interface type: D-type 3-pin right-angle PCB
power socket power welding socket (male-female-male) ;Signal definitions from left to
right
interface are -48 VGND, PGND, and -48V respectively.
Channel B DC Standby external power interface;Interface type: D-type 3-pin right-angle
power socket PCB
power welding socket (male-female-male);Signal definitions from left to right
are -48 VGND, PGND, and –48V respectively.
interface A Channel A power supply indicator, green
indicator
B Channel B power supply indicator, green
Contents

 ZXCTN 6110 （ V1.1 ） Product Hardware

Introduction
 Product Overview
 System Structure
 Board Function
 Performance and index
ZXCTN 6110 （ V1.1 ） Product Performance list
 Power Indicators
 Service Performance
 Reliability Indicators
 Ethernet Performances
 Protection Switching Performance
 Interface Performances
Power Indicators
 Power Supply Requirements
Power Module Code Input Voltage (V) Voltage Range (V)
PWA -48 DC -48±20% DC
PWB 110/220 AC 110.0~240.0 AC

 Power Consumption Indexes

 The overall power consumptions are different according to different configurations
and the maximum power consumption is less than 42 W.
 The power consumption of ZXCTN 6110 with typical configuration is listed below:

Name Quantity
ZXCTN 6110 Subrack (with Fan Module and Backplane) 1 SET

SMC 1 Piece
E1TE-75 2 Piece
PWA 1 Piece
Actual Total Power Consumption 41.4W
Service Performance
 ZXCTN 6110 supports the service switching with packets as core.
The service processing capability is shown below ：

Backplane Capacity Switching Capacity （ dual-directio Packet transmit rate

n）
- 6Gbps 7.44Mpps

 ZXCTN 6110 provides various service interfaces. The types and

number of interfaces are shown below:
Interface Maximum Service Inputs of Maximum Service Inputs of
Interface
Type Each Service Board Each Subrack
FE (Electrical) 4 4
Ethernet FE (Optical) 4 12
GE (Optical) 4 4
ATM IMA E1 16 32
TDM E1 16 32
Ethernet Performances
 Quantity of VLAN ID
 All Ethernet interfaces of ZXCTN 6110 can identify C-
VLAN ID 1-4094 according to IEEE 802.1Q ， and
VLAN ID 1-4094 can be configured on all Ethernet
interfaces.
 Quality of Ethernet EVC Services
Service Type Performance Indicator (Piece)
E-LINE 900
E-LAN+E-TREE 12
Ethernet Performances
 MAC Address Performance

Item Performance Indicator

MAC Address Table Capacity 16K pieces
MAC Address Learning Speed 150/s
MAC Address Aging Time 10s~604800s

 ACL and other Performance

Item Performance Indicator
Ingress ACL Entries 1K
Egress ACL Entries 128
Group 6 pieces
LACP Max Port Number in Each Group 8 pieces
L2 Multicast Entries 256 pieces
Multicast L2 Multicast Join Time 50ms
L2 Multicast Leave Time 10ms
Protection Switching Performance
 Ring network protection switching time is tested to one ring network
composed of 16 ZXCTN 6110 nodes without protection hold-off.

Protection Type Performance Indicator

1+1 path protection Less than 50ms
1:1 path protection Less than 50ms
MPLS-TP Wrapping ring network protection Less than 50ms
PW dual-home protection Less than 50ms

 Protection Switching Hold-Off Time And Wait To Restore Time

(WTR)
Type Period Step
Protection Hold-off Time 0-10 s 100 ms
Wait to Restore Time (WTR) 1-12 min 1 min
Ethernet Interface Performances
 FE Interface Performances
 ZXCTN 6110 supports 10 Mbit/s and 100 Mbit/s Ethernet interfaces. Interface conforms
to IEEE 802.3 standards and IEEE 802.3u standards.
– Electrical Interface Performances
» 10 Mbit/s Ethernet Interface ： 10 Mbit/s Ethernet interface conforms to IEEE 802.3
standards,physical interface adopts Manchester Code, and cable adopts 10Base-T.
» 100 Mbit/s Ethernet Interface ： 100 Mbit/s Ethernet interface conforms to IEEE 802.3u
standards and cable adopts 100Base-TX (twisted-pair cable).
– Optical Interface Performances
» FE optical interface adopts 100Base-FX module
» Receiver sensitivity and receiver overload optical power are tested in condition of BER=1×10-10.

Item Performance Indicator

100Base-FX 100Base-FX 100Base-FX
Multimode Singlemode Singlemode
(Short Distance) (Medium Distance)
Transmission Distance (km) 2 15 40
Working Wavelength (nm) 1270 ～ 1380 1261 ～ 1360 1261 ～ 1360
Average Optical Transmit Power (dBm) -20 ～ -14 -11.5 ～ -8.0 -5 ～ 0
Receiver Sensitivity (dBm) -30 -31 -34
Receiver Overload Optical Power (dBm) -14 -8 -9
Min. Extinction Ratio (dB) 10 9 10
Ethernet Interface Performances
 GE Interface Performances
 GE interface (that is 1000 Mbit/s Ethernet interface) of ZXCTN 6110 conforms to IEEE
802.3z standards and adopts SFP optical module. Interface types can be 1000Base-SX and
1000Base-LX.
 Receiver sensitivity and receiver overload optical power are tested in condition of
BER=1×10-10.

Item Performance Indicator

1000Base-SX 1000Base-LX 1000Base-LX
Multimode Singlemode Singlemode
(Short Distance) (Long Distance)
Transmission Distance (km) 0.275 10 80
Working Wavelength (nm) 830 ～ 860 1270 ～ 1355 1540 ～ 1570
Average Optical Transmit Power (dBm) -9.5 ～ -4.0 -9.5 ～ -3.0 0～5
Receiver Sensitivity (dBm) -17 -20 -22
Receiver Overload Optical Power 0 -3 0
(dBm)
Min. Extinction Ratio (dB) 9 9 9
Electrical Interface Performances
 Performance indicators of ZXCTN 6110 E1 (TDM E1 and IMA E1)
electrical interface

Item Performance Indicator

Nominal Rate 2048kbit/s
Pattern High Density Bipolar 3 (HDB3)
Allowed Attenuation of the Input Port 0dB~6dB ， 1024kHz
(Square Root Regular Attenuation)
Permitted Input Port Frequency Offset >±50ppm
Output Port Rate Bit Error Tolerance <±50ppm
Load Impedance Testing 75Ω or 120Ω
Inlet Interference Resistance Capability 18dB
(Signal-Noise ratio: S/N)

 1ppm1×10-6 1UI=488 ns for 2048kbit/s Interface