Sachin Tech

VOICE CONTROLLED ROBOT
By UNDER THE GUIDANCE OF

Sachin H.U Mrs.Rekha S.N.
(1SG10EE042) Associate professor
Dept. of Electrical and Electronics Engineering
Sapthagiri college of Engineering, Bangalore.
INTRODUCTION
When we say voice control, the first term to be considered is

Speech Recognition i.e. making the system to understand
human voice.
SPEECH RECOGNITION is a technology where the system

understands the words (not its meaning) given through speech.
Speech is an ideal method for robotic control and

communication and another advantage is its
easy programmability.
Why robots?
Robots are indispensable in many manufacturing

industries. Because of their following advantages,
 Once programmed repeatedly perform functions with a high accuracy.
 Cost requirement is low(running).
 Robots are built and programmed to a specific job.
 Error free operation.
 can work in all types of polluted environments
Without risking human life or limb, robots can replace
humans in some hazardous duty service. Robots can work
in all types of polluted environments, chemical as well as
nuclear.
THE TASK
The robotic car which could be controlled using voice

commands. Generally these kinds of systems are known as
Speech Controlled Automation Systems (SCAS)
We are not aiming to build a robot which can recognize a lot
of words. What we are aiming at is to control the robot
using following voice commands.
Robot which can do these basic tasks:
1. move forward
2. move back
3. turn right
4. turn left
5. load
6. release
7. stop ( stops doing the
current job )
SAMPLE INPUT OUTPUT
INPUT (Speaker speaks) OUTPUT (Robot does)
forward moves forward
Back moves back
Right turns right
Left turns left
Load Lifts the load
Release Releases the load
Stop stops doing current task

SPEECH RECOGNITION TYPES AND STYLES
Speech recognition is classified into two categories

1. Speaker dependent : Systems are trained
by the individual who will be using the
system.
2. Speaker independent : System trained to
respond to a word regardless of who
speaks
DESIGN APPROACH ( Block diagram )
SYSTEM DESIGN
a) Voice Recognition Module
b) Microcontroller and Decoder
c) RF module
d) Motor Driver Circuit
e) Buffer
The voice recognition module basically consists of:
Voice Recognition Chip :

It is the heart of the entire system. The input
voice command is analyzed, processed, recognized and
then obtained at one of its output port which is then
decoded, amplified and given to motors of robot car.
Microphones
It takes the analog voice commands and sends it to

voice recognition chip in the form of electrical signal.
These detect sound signals and produce an electrical
image of the sound i,e., they produce a voltage or a
current which is proportional to the sound signal.
Keypad
It is used for programming the chip. It also allocates definite
memory locations to voice commands. The keypad is made up of
12 switches.
Display Module
7-segment Display: It is used to test the voice recognition circuit. The 7

segment display is used as a numerical indicator on many types of test
equipment.
8k x 8 RAM : It stores decoded voice commands by the chip at the assigned

locations.
Circuit Diagram of voice recognition module:
Microcontroller and driver circuit:
Decoder: It is second most important part of the project. The output

from the chip is given to decoder (micro-controller) which acts as a
DMC i.e. a Digital Motor Controller.
RF module:
RF modules are normally divided into three groups, RF

transmitter module, RF receiver module and RF transceiver
module.
Design
Buffer: We used IC 74LS245 as buffer ic. It is a 3-state octal bus

transceiver. They are designed for asynchronous two-way
communication between data buses
Batteries: Batteries are by far the most commonly used electric

power supply for robotics.
Types of Battery used are,
 Primary batteries: Primary batteries are one-time-use batteries. The batteries

we will look at in this class deliver 1.5 V per cell.
 Secondary batteries: Secondary batteries are rechargeable. The most common

rechargeable batteries are NiCds and lead-acid.
APPLICATIONS
 The robot can be used as a toy.

 It can be used to bring and place small objects.
 It is the one of the important stage of Humanoid robots.
 Command and control of appliances and equipment
 Telephone assistance systems
 Data entry
 Speech and voice recognition security systems.
 The robot is useful in places where humans find difficult to
reach but human voice reaches. E.g. in a small pipeline, in a
fire-situations, in highly toxic areas.
Thank you

Sachin Tech

Uploaded by

Copyright:

Available Formats

Sachin Tech

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sachin Tech

Uploaded by

Copyright:

Available Formats

VOICE CONTROLLED ROBOT

By UNDER THE GUIDANCE OF

When we say voice control, the first term to be considered is

SPEECH RECOGNITION is a technology where the system

Speech is an ideal method for robotic control and

Robots are indispensable in many manufacturing

The robotic car which could be controlled using voice

INPUT (Speaker speaks) OUTPUT (Robot does)

forward moves forward

Back moves back

Right turns right

Left turns left

Load Lifts the load

Release Releases the load

Stop stops doing current task

Speech recognition is classified into two categories

a) Voice Recognition Module

b) Microcontroller and Decoder

d) Motor Driver Circuit

Voice Recognition Chip :

It takes the analog voice commands and sends it to

7-segment Display: It is used to test the voice recognition circuit. The 7

8k x 8 RAM : It stores decoded voice commands by the chip at the assigned

Decoder: It is second most important part of the project. The output

RF modules are normally divided into three groups, RF

Buffer: We used IC 74LS245 as buffer ic. It is a 3-state octal bus

Batteries: Batteries are by far the most commonly used electric

 Primary batteries: Primary batteries are one-time-use batteries. The batteries

 Secondary batteries: Secondary batteries are rechargeable. The most common

 The robot can be used as a toy.

You might also like