Catalogue of Jumbo

Jumbo Power Technology Co.,Limited

——Always Doing The Best
1.WHAT IS JUMBO

Jumbo is the power saver brand from Jumbo Power Technology who specialized in designin
g and manufacturing single phase power savers and three phase power savers from China.

A brand new technology with high quality products! Jumbo is widely used for electricity ener
gy saving of home, office, restaurant, shops, banks, factory…Even more than 90% location
s that you can imagine for energy saving, Jumbo will DO!

Jumbo is used to reduce electricity consumption by increasing the energy efficiency while n
ot drop the voltage.

Average energy saving depending on different loads:

Inductive Load(L):>15%
Complex Load(L+R+C):Average 8%

Jumbo Power Technology Co.,Limited

——Always Doing The Best
2.WHEN JUMBO IS NEEDED

No matter when, one of the question headache us is the lacking of

electricity. If you are luck enough, you must have experienced the time
without electricity light.

So, how to solve this issue when the energy cost are continuing to
increase year by year?

Yes, we save it! But how? Jumbo provides now a very easy solution
which will not only save the electricity bill, but also reduces the
environment impact. One stone with two birds!

If you need energy saving for your house, install Jumbo!

If you need energy saving for any commercial site, install Jumbo!

Jumbo Power Technology Co.,Limited

——Always Doing The Best
3.HOW TO CHOOSE JUMBO

According to the different applications,you are suggested to confirm the details

below before installation of any Jumbo Power Saver:
1.Local Current (Amp)
2.Total Power (KW or KVA)
3.Voltage Range (V)
4.Local Power Factor
5.Single or Three Phase
6.What Equipments Consume Most of the Energy

Jumbo provides single phase:

Jumbo-H5 Jumbo-H10 Jumbo-H20
Jumbo-H40 Jumbo-H60

Jumbo provides three phase:

Jumbo-C10 Jumbo-C20 Jumbo-C40
Jumbo-C60 Jumbo-C80 Jumbo-C100
You can simply take the number 5,10 or 20 as the KW for the load that should be saved

Jumbo Provides ODM:

Based on special application requirement,Jumbo is able to ODM for customer

Jumbo Power Technology Co.,Limited

——Always Doing The Best
4.WHY CLIENTS CHOOSE JUMBO

A-Jumbo power saver is high efficiency energy saving:

Average 15% energy saving based on 70% load factor

Pure L Load: (Air Conditionings, Refrigerators, Motors)>15%
L+R Load:>8% (more than 60% inductive load)

B-Jumbo Power Saver has a wide voltage range:

Single phase:90V to 265V
Three Phase:155V to 450V

C-Wide current inspection range:

Single Phase:0 to 300Amp
Three Phase:0 to 600Amp

D-Compensation switching mode:

64 kinds

Jumbo Power Technology Co.,Limited

——Always Doing The Best
E-Process different protection mode, when the voltage &temperature is over the
ratings, capacitors switching will be automatically stopped

Over-current protection
Over-voltage protection
Over-temperature protection Intelligently
If the Temp. inside is over 45 degree, the power saver will stop working automatically to let
the Temp. get down slowly. After the Temp. return to 35 degree or below. The power saver
will start to work again

F-The SOLE INNOVATION intelligent software:

Ensure the installation of the CT outside without any orientation requirement. Even you have
hanged the CT with wrong orientation, the system will automatically calibrate it while brings
you no trouble to reinstall it.

G-The SOLE INNOVATION intelligent load detection system:

When the load is detected, compensation will be started automatically. If the

load stops working, the saving mode will be stopped immediately.

Jumbo Power Technology Co.,Limited

——Always Doing The Best
H-Process the function of stabilizing the voltage by eliminating the harmonics

Before Connection of Jumbo

After Connection of Jumbo

Jumbo Power Technology Co.,Limited

——Always Doing The Best
I-Excellent compensation effect:

The power factor of the electricity load can be increased to more than 0.9 as long
as customers install a right volume Jumbo power saver

J-Jumbo power saver is a real fool installation type:

No need extra setting, just connect the wires rightly before it works properly

K-Jumbo power saver is real smart size:

Compared with the same volume power savers in the market, the size of Jumbo power
saver is only half of them

L-Customized according to customer needs:

Including the features design, the functions development, own brand from customers

M-Wireless online interface:

Coupled with own wireless transmission module for wireless controlling

Jumbo Power Technology Co.,Limited

——Always Doing The Best
5.PARAMETERS OF JUMBO
Working Range Power Working
Model No. Size Application HZ IP Level Weight (KG)
(KW-AC) In Mode
250*230*92
Jumbo-H5 5
mm
250*230*92
Jumbo-H10 10
mm
250*230*92
Jumbo-H20 20
mm Home Usage 90V- 50HZ-
64 Kinds IP43 3.5KG to 4KG
250*230*92 (Single Phase) 265V 60HZ
Jumbo-H30 30
mm
250*230*92
Jumbo-H40 40
mm
250*230*92
Jumbo-H60 60
mm
550*400*92
Jumbo-C10 10
mm
550*400*92
Jumbo-C20 20
mm
550*400*92
Jumbo-C40 40 Commercial
mm 155V- 50HZ-
Usage (Three 64 Kinds IP43 8KG-12KG
550*400*92 450V 60HZ
Jumbo-C60 60 Phase 3P4W)
mm
550*400*92
Jumbo-C80 80
mm
550*400*92
Jumbo-C100 100
mm

Jumbo Power Technology Co.,Limited

——Always Doing The Best
6.SPECIFICATION OF JUMBO

LED Displaying
LCD Displaying
1(V) 2(C1) 3(C2) 4(C3) 5(C4) 6(C5) 7(C6)

Working Temperature: -40°to +70°

Panel Designed: Stainless Steel
Loading Rate: 0 to 50Amp
LCD Display: Power Factor/Current(I)/Voltage(U)/Current Saving
(S)
LED Display: Working Status
Software: Microchip Intelligent
Saving Status:64Kinds
Control Method:Real Time Operation System (RTOS) Embedded
Related Technology: FPC DSP

Single Phase Power Saver

Jumbo Power Technology Co.,Limited

——Always Doing The Best
 LED Displaying
LCD Displaying
1(V) 2(C1) 3(C2) 4(C3) 5(C4) 6(C5) 7(C6)

Working Temperature: -40°to +70°

Panel Designed: Stainless Steel
Loading Rate: 0 to 50Amp
LCD Display:Power Factor/Current(I)/Voltage(U)/Amp Saving (S)
LED Display: Working Status
Software: Microchip Intelligent
Saving Status:64Kinds
Control Method:Real Time Operation System(RTOS)Embedded
Related Technology: FPC DSP

Three Phase Power Saver

Jumbo Power Technology Co.,Limited

——Always Doing The Best
7.CERTIFICATION OF JUMBO-NEW VERSION

CE EMC RoHs

Jumbo Power Technology Co.,Limited

——Always Doing The Best
8.BENIFITS OF INSTALLING JUMBO POWER SAVER

Energy Saving

Stabilize Voltage

Load Current Lose

Near to Zero

Jumbo Power Saver

Monitor&Improve
Power Quality

Surge Protection

Improve
Power Factor

Reduce Harmful
Harmonics
Single Phase Power Saver

Precautions:
1)In case of any mistake when you install single phase power saver with CT outside, you have to read the instruction v
ery carefully
2)Jumbo single phase power saver is suggested to install together near to inductive loads.
3)There are 4 lines in single phase power saver with CT outside. Black wire is for CT testing from the power saver. Re
d wire is live wire for “power in” to the power saver. Blue wire is the neutral wire. Green-Yellow wire is for earth.
4)You have to connect the wires strictly according to the drawing, especially the “power in” to the power saver must be
RED wire. The CT wire must be connected in front of the connector of RED wire (Live Wire) ,if not, the data to the
power saver will not be right.
5) Please don’t mix the connection of the live wire and neutral wire.
6) If you still don’t understand, please feel free to contact Jumbo Power Technology Co.,LTD

Jumbo Power Technology Co.,Limited

——Always Doing The Best
Three Phase Power Saver (CT Outside)

Precautions:
1)In case of mistake when you install three phase power saver with CT inside, you have to read the instruction carefully.
2)Jumbo three phase power saver is suggested to install near to the inductive loads.
3)There are 8 lines in three phase power saver with CT inside.3 Black wires are the live wires for “power out” from the p
ower saver.3 Red wires are live wire for “power in” to the power saver. Blue wire is the neutral wire. Green-Yellow
wire is for earth.
4)You have to connect the wires strictly according to the drawing, especially the “power in” to the power saver must be
RED wire (Live Wire ). The CT wire must be connected in front of the connector of RED wire (Live Wire), if not, the
data to the power saver will not be right.
5)Please don’t mix the connection of the live wire and neutral wire.
6)If you still don’t understand, please feel free to contact Jumbo Power Technology Co.,LTD

Jumbo Power Technology Co.,Limited

——Always Doing The Best
Installation instruction:

1.Keep the power off before installation.

2.According to the Amp you are using, choose the same standard breaker to install it betw
een the power saver and inductive loads.

3.Connect the live wire, neutral wire, earth wire, CT wire to the right wires of the load accor
ding to the instruction.

4.After connection of the wire, please check on whether all the installation is right.

5.Open the breaker, then open the switcher of the power saver if it has.

6.If all the connection is right,then the power saver starts the working

Jumbo Power Technology Co.,Limited

——Always Doing The Best
Installation Notice

1.The Power Savers are suggested to install between the inductive loads and the
circuit breaker of your electrical service panel (not upstream or downstream of
the installation)

2.This device works by adjusting the power working efficiency of the electricity
system, it must be set up as close as possible to the entry point of the electricity
source. Even more efficiency with inductive loads. It protects the voltage from
fluctuation peaks.

3.The installation is suggested to be handled by a professional or a qualified

technician. Do not modify, open or repair any Jumbo power saver by yourself. If
you meet any trouble, call the supplier where you purchased.

4.Make sure the intensity applied to the earth cable in 4 ohms.

5.Be certain of the accessories used for the connection must be in accordance
with the international standard.

Jumbo Power Technology Co.,Limited

——Always Doing The Best
10.WARRANTY POLICY OF JUMBO

5 Years Warranty:

The former 2 years:

on any quality issue of functions inside, new accessories will be exchanged. Customer should
be responsible for the delivery cost when Jumbo ship the new parts to them. While for the bro
ken parts, under kind discussion, customers help Jumbo delivery the parts to Jumbo company.
Jumbo will shoulder the delivery cost.

The after 3 years:

Jumbo is responsible for the maintenance of any broken products.While customers should be
responsible for all the delivery cost.

Suggestion:
If customers would like to build agent or OEM business relationship with Jumbo, you are sugg
ested to get a training on how to maintain the parts in the purpose of saving cost and time for
both sides.

Jumbo Power Technology Co.,Limited

——Always Doing The Best
11.BUILD THE AGENT RELATIONSHIP WITH JUMBO

Step 1 :Purchase Jumbo power saver for sample testing

Step 2 :Be our dealer for Jumbo power saver at first

Step 3 :From dealer relationship to agent relationship

For more information on how to build agent relationship with Jumbo

and the related rights, please check the website below:

http://www.chinapowersaver.com/news/Agent-relationship-with-Jumbo-27.html

Jumbo Power Technology Co.,Limited

——Always Doing The Best
Many thanks for your time to view Jumbo catalogue!

May you enjoy a very pleasant day!

If you have any question,please feel free to contact us:

Jumbo Power Technology Co.,LTD

Website:http://www.chinapowersaver.com
http://www.jumbopowersaver.com

Jumbo Power Technology Co.,Limited

——Always Doing The Best