Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
2K views

Automatic Door Opener Using Arduino and PIR Sensor

This document describes an automatic door opener system using an Arduino and PIR sensor. The system detects motion using the PIR sensor and opens the door (represented by a CD tray with motor). When no motion is detected for a few seconds, the door closes. Key components are the Arduino, PIR sensor, motor driver, motor, and wiring. When the PIR sensor detects motion, it sends a signal to the Arduino. The Arduino then activates the motor driver to open the door motor. After a set time, it activates the driver again to close the door motor. Such systems can automate doors in homes, offices, and other buildings.

Uploaded by

Supritha
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
2K views

Automatic Door Opener Using Arduino and PIR Sensor

This document describes an automatic door opener system using an Arduino and PIR sensor. The system detects motion using the PIR sensor and opens the door (represented by a CD tray with motor). When no motion is detected for a few seconds, the door closes. Key components are the Arduino, PIR sensor, motor driver, motor, and wiring. When the PIR sensor detects motion, it sends a signal to the Arduino. The Arduino then activates the motor driver to open the door motor. After a set time, it activates the driver again to close the door motor. Such systems can automate doors in homes, offices, and other buildings.

Uploaded by

Supritha
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

AUTOMATIC DOOR OPENER USING

ARDUINO AND PIR SENSOR

BY
SUPRITHA V
AKSHATHA A E
CONTENT

•Introduction
•Overview
•Circuit Diagram of Automatic Door Opener System
•Components Required for Automatic Door Opener System
•Component Description
•Arduino UNO
•PIR Sensor
•L298N Motor Driver Module
•Circuit Design
•Code
•Working of Automatic Door Opener System
•Applications
INTRODUCTION

• An Automatic Door Opener System is a simple project based on PIR Sensor and Arduino,
which automatically opens and closes the door by detecting a person or object.

• we might have seen Automatic Door Opener Systems at shopping malls, cinemas,
hospitals etc. where, as soon as a person approaches the door (at about 2 or 3 feet), the
door automatically slides open. And after some time (about 5 to 10 seconds), the door
closes by sliding in the reverse direction.

• Such Automatic Door Opener Systems are very useful as you do not need a person to
standby the door and open it whenever a guest comes. Also, since the doors are opened
and closed only when a person approaches the door, there is significantly less loss of air
conditioning.

• So, in order to understand the potential of this concept, we have implemented a simple
Automatic Door Opener System using Arduino and PIR Sensor. 
OVERVIEW

• In the Automatic Door Opening System, the main component or hardware is the sensor
which detects the persons (well, the motion of the person in our case). For this purpose, we
will be using the PIR(passive infard-red) Motion Detector Sensor. Whenever the PIR Sensor
detects a motion, the CD Tray opens and then closes after some time.
• In order to control the 5V DC motor in the CD Tray, we used the L298N Motor Driver
Module.
CIRCUIT DIAGRAM OF AUTOMATIC DOOR
OPENER SYSTEM
COMPONENTS REQUIRED FOR AUTOMATIC
DOOR OPENER SYSTEM

• Arduino UNO 
• PIR Sensor  
• L298N Motor Driver Module 
• CD Tray with 5V Motor
• Breadboard  
• Connecting Wires  
• Power Supply  
COMPONENT DESCRIPTION

• Arduino UNO
In this project, Arduino UNO acts as the main controlling part. It reads the data from the PIR
Sensor and activates the L298N Motor Driver based on the data from the PIR Sensor. 
• PIR Sensor
Detecting human motion is done with the help of PIR Sensor.

• L298N Motor Driver Module


Motor Driver is an important part of the project as it is responsible for driving the motor of the
door (CD Tray Motor in this case). In this project, we have used the very common and very
popular L298N Motor Driver Module. 
CIRCUIT DESIGN

• First, the Data OUT of the PIR Sensor is connected to Digital Pin 8 of Arduino. The other two pins of
PIR Sensor i.e. Vs and GND are connected to +5V and GND respectively.
• Coming to the Motor Driver, we have used the second channel of the L298N Motor Driver Module.
Hence, the IN3 and IN4 of the L298N Motor Driver are connected to Digital Pins 2 and 3 of Arduino.
• The Enable Pin of the Second Motor on the L298N Module us connected to +5V. Usually, all the
L298N Modules consists of a jumper to directly connected the Enable pins to +5V.
• Since the motor used in the project is a 5V Motor, I’ve connected a 5V Supply to the Motor Driver
Module.
• Finally, the Motor of the CD Tray is connected to the OUT3 and OUT4 of L298N Motor Driver
Module.   
WORKING OF AUTOMATIC DOOR OPENER
SYSTEM

• The working of the Automatic Door Opener System using Arduino and PIR Sensor is very
simple.
• When the PIR Sensor detects any motion of a person, its Data OUT Pin will become HIGH. As
this pin is connected to the Arduino, it will detect this HIGH Signal and understands that there
is person approaching the door.
• Arduino then immediately activates the L298N Motor Driver module to open the door. After
some time (about 2 to 5 seconds in this project), the Arduino will once again activate the
Motor Drive to close the door.      
APPLICATIONS

• Arduino based Automatic Door Opener System is a very useful project


as it enables you to understand the concept of such automatic door
opener systems and how they work.
• These systems are already being used in many places like malls,
theatres and hospitals.
• You can implement this Arduino based project at you home in Garage
Door Openers, toilet cover openers, Office door openers, etc.  
COST ESTIMATED
Sl .no Components Value Quantity Price per unit Net price (Rs.)
used (Rs.)
1 Arduino UNO UNO R3 1 750 750
2 PIR Sensor 2 160 320
3 Motor drive IC L298N 1 250 250
4 DC motor 5V 1 150 150
5 Breadboard 1 230 230
6 Connecting 50 100
wires
7 micellaneous 200 200
2000
FUTURE SCOPE
THANK YOU

You might also like