Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
24 views

Control Chart Basics

Control charts are a statistical tool used to determine if a process is in or out of control. There are two main types - variable control charts which measure things like weight, height, or volume, and attribute control charts which factor in quality attributes. Variable charts include X-bar, R, and MA charts while attribute charts include P, C, and U charts. Control charts were developed in the 1920s and can help improve productivity, make defects visible, and determine what process adjustments are needed. They plot data over time to see if the points fall within established control limits.

Uploaded by

Pamela Morcilla
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
24 views

Control Chart Basics

Control charts are a statistical tool used to determine if a process is in or out of control. There are two main types - variable control charts which measure things like weight, height, or volume, and attribute control charts which factor in quality attributes. Variable charts include X-bar, R, and MA charts while attribute charts include P, C, and U charts. Control charts were developed in the 1920s and can help improve productivity, make defects visible, and determine what process adjustments are needed. They plot data over time to see if the points fall within established control limits.

Uploaded by

Pamela Morcilla
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 35

Control Charts

• Definition:
- A statistical tool to determine if a
process is in control.
History of Control Charts

• Developed in 1920’s
• By Dr. Walter A. Shewhart
• Shewhart worked for Bell Telephone Labs
Two Types of Control Charts

• Variable Control Charts


• Attribute Control Charts
Variable Control Charts
• Deal with items that can be measured .
• Examples
1) Weight
2) Height
3) Speed
4) Volume
Types of Variable Control
Charts

• X-Bar chart
• R chart
• MA chart
Variable Control Charts
• X chart: deals with a average value in a
process
• R chart: takes into count the range of the
values
• MA chart: take into count the moving
average of a process
Attribute Control Charts
• Control charts that factor in the quality
attributes of a process to determine if the
process is performing in or out of control.
Types of Attribute Control
Charts
• P chart
• C Chart
• U Chart
Attribute Control Charts
• P Chart: a chart of the percent defective in
each sample set.
• C chart: a chart of the number of defects
per unit in each sample set.
• U chart: a chart of the average number of
defects in each sample set.
Reasons for using Control
Charts
• Improve productivity
• Make defects visible
• Determine what process adjustments need
to be made
• Determine if process is “in” or “out of
control
Real World Use of Control
Charts
• Example from “Managing Quality” by
Foster.
– The Sampson company develops special equipment for
the United States Armed Forces. They need to use
control charts to insure that they are producing a
product that conforms to the proper specifications.
Sampson needs to produce high tech and top of the
line products, daily so they must have a process that
is capable to reduce the risks of defects.
How Will Using Control Charts help your
Company?

• Possible Goals when using Control Charts


in your Company:
– Line reengineering
– Increased Employee motivation
– Continually improve of your process
– Increased profits
– Zero defects
Control Chart Key Terms
• Out of Control: the process may not
performing correctly
• In Control: the process may be performing
correctly
• UCL: upper control limit
• LCL: lower control limit
• Average value: average
Process is OUT of control if:
• One or multiple points outside the control
limits
• Eight points in a row above the average
value
• Multiple points in a row near the control
limits
Process is IN control if:
• The sample points fall between the control
limits
• There are no major trends forming, i.e.. The
points vary, both above and below the
average value.
Calculating Major Lines in a
Control Chart
• Average Value: take the average of the sample data
• UCL: Multiply the Standard deviation by three. Then
add that value to the Average Value.
• LCL: Multiply the Standard deviation by three. Then
subtract that value from the Average Value.
Examples of Control Charts
Examples of Control Charts
Control Charts

• The following control chart shows the


improvement of a process. The standard
deviation decreases as the process
becomes more capable.
Example of Control Charts
How to Calculate the
standard deviation

• P chart:
– P= percent or rate
– N= number of trails
How to Calculate the
standard deviation

• C chart:
– X= the average
How to Calculate the control
limits
• X-bar Chart:

Lower Control Limit:


• Mean – 3*sigma
n(1/2)
Center Line:
• Process mean

Upper Control Limit:


• Mean + 3*sigma
n(1/2)
How to Calculate the control
limits
• R chart:
– Lower Control Limit:
• R-Bar – 3*d3*sigma
– Center Line:
• R-Bar
– Upper Control Limit:
• R-Bar + 3*d3*sigma
Sample Size
• The sample set of data should be greater
than 28.
• The data should have been collected
uniformly
• The data should contain multiple capable
points of data, or the information is
incorrect.
Example
• First Step: Determine what type of data
you are working with.
• Second Step: Determine what type of
control chart to use with your data set.
• Third Step: Calculate the average and the
control limits.
Example
• The following slides contain data and
questions for your practice with control
charts. Please take the process step by
step and look back to previous slides for
help.
Problem
• You have gathered a sample set of data for your
company. The data is in the form of percents. Your
company wants your recommendation, is the
process in control.
• What type of control chart should you use? (Variable
or Attribute)
Problem

• What type of specific control chart should


you use with that type of sample set? (X-
bar, R-chart, MA-chart, P-chart, R-chart, or
U-chart)
Problem
• Now that you have determined the control
chart to use, you have to calculate the
average and standard deviation. Use the
data on the following slide. Take notice to
the amount of sample data. (n>28)
Sample Data
Day Percent Day Percent
1 .056 15 .068
2 .078 16 .038
3 .064 17 .077
4 .023 18 .068
5 .067 19 .053
6 .078 20 .071
7 .067 21 .037
8 .045 22 .052
9 .034 23 .072
10 .045 24 .047
11 .062 25 .042
12 .051 26 .051
13 .070 27 .064
14 .039 28 .071
Example
• Now that you have calculated the three
important lines for the control chart, plot
the data and determine if the process is
capable. (i.e. The data falls mostly inside
the UCL, and the LCL)
Final Step
• Make a recommendation to your company.
– The process is capable
– The process is not capable
• The following errors were found.
• The process needs improvement
• The variations are normal in the system and we
must accept them.
Control Charts Review
• What have we learned?
– Control Charts are a useful way to determine the
capability of a process.
– The different types of control charts.
– How to calculate the control limits for a control
chart.
Works Cited
“Control Charts as a tool in SQC.” Internet. http://deming.eng.clemson.edu/pub/tutorials/qctools/ccmain1.htm.
31 January 2001.

Foster, S. Thomas. Managing Quality. Upper Saddle River: Prentice Hall, Inc. 2001.

“Generating and Using Control Charts.” Internet. http://www.hanford.gov/safety/upp/spc.htm. 31 January 2001.

“Quality and Statistical Process Control.” Internet. http://www.systma.com/tqmtools/ctlchtprinciples.html. 12


February 2001.

“Statistical Thinking Tools-Control Charts for the Average.” Internet.


http://www.robertluttman.com/yms/Week5/page6.htm. 12 February 2001.

You might also like