Drilling Machine

Drilling Machines
Mrs .L . K. Immanuel
04/2021
Introduction
A drilling machine is a machine fitted with a cutting tool attachment or driving

tool attachment, usually a drill bit or a driver bit, used for boring holes in various
materials. Its main function is to drill holes in the variety of metals, wood,
Teflon and concrete walls. There are many other functions that drilling machines
are capable of performing. This functions include tapping, spot facing, reaming,
countersinking and counterboring. Drill machines are found in different types,
sizes and shapes but share the same function.
Objectives
The objectives of this lesson are to:
 Discuss the safety operating standards of drilling machines;

 Identify different types of the drilling machines and their
components; and
 describe the operation of the drilling machines.
Safety operating standards of a drilling
machines
 Carry out risk assessment before commencing with operation.
 Do not support the workpieces by hand. Use the holding device (vice) to prevent the workpiece
from being torn from the operator’s hand.
 Never make any adjustments while the machine is in motion.
 Never clean or remove away chips with your hand. Use a brush.
 Do not wear loose clothes when working on turning drill machine.
 Never place tools or equipment on the drilling table.
 Keep all guards in place while operating.
 Remove all chuck keys and wrenches before operating.
 Do not use a mobile phone while drilling.
 Know where the emergency stop buttons are positioned.
 Always wear your eye protection(Safety goggles) when drilling.
 Keep hands away from the moving/ rotating machinery.
 Report any damage on drill machines/ equipment as this could cause harm to people or
accidents.
 Keep the machines in a good safety state at all times (Do housekeeping after every duty )
Safe Drilling Work
Unsafe drilling work
Types of drilling machines
Portable hand drilling machine Portable magnetic drilling

machine
drill chuck body handle feed handle motor controls

spindle motor
spindle
chuck
trigger magnet
Types of drilling machines
Pillar drilling machine Radial drilling machine

electric motor feed handle arm elevator motor spindle
motor
motor controls
controls
arm
Spindle
spindle
Drill
table adjustment
Table handle
column
base
Components of a Redial drilling Machine
 Base- Support the column and stabilize it. It can also be used for clamping
heavier work.
 Table- Clamps or holds the working material in place.
 Vertical Column- support the arm carrying the spindle head, can be swiveled
around it.
 Spindle- holds the drill chuck and is responsible for rotation.
 Feed levers- it drill feed into the workpiece.
 Spindle motor- provide power or engage the spindle
Drilling machine attachments
Self-locking
drill chuck Tapered Shank / Sleeve Drill chuck and key Tapered drift
Drill bits/drill attachments
Pillar drilling machine
Pillar drilling machine are floor mounted heavily constructed drilling machines.
They are driven by a powerful electric motor and the spindle speed is varied by a
gearbox. Pillar drills are full machines that features a sliding column that is
operated by a rotating feed handle. A pillar drilling machines rack and pinion or
drill chuck can take up to 50mm diameter drills. Drill chucks as well as drill bits
can be inserted directly into the spindle. The machine table can be swung around
the column and can also rotate around it’s own axis (360 degrees). Because of
these combined movements any point can be brought under the drill bit on the
table.
Radial drilling machine
Radial drilling machines are heavy duty drilling machines, fitted with the cutting tool or
a drill bit used for drilling holes on different material. The construction of the radial
machine is such that the arm carrying the spindle head can be swiveled around the
vertical column. The head that carries the spindle can be located at any point along the
arm rotating in the horizontal pane. The arm together with the spindle head can be
raised or lowered on the column and than clamped tightly in position. The work that is
performed on the machine is usually large and heavy so it is easier to swing the arm of
the radial drilling machine and bring the drill in position over the work than to move
the work on the table. The flexibility of the machine include manual feed, conventional
power feed on the spindle, power driven arm, a rapid traverse control to quickly
reposition the arm, a table which clamps to the base.

Conclusion
A drilling machine is an important tool that is used in manufacturing and

construction Industries. It can be used to perform different tasks but it is
primarily used to drill holes on metals, wood, plastics(Teflon) and concrete walls.
Safety operating standards should be adhered to, to guide and prevent the
operator from unforeseen accidents. Drilling machines must be maintained to
prolong the lifespan of the machine ( Proper housekeeping must be done).

Drilling Machine

Uploaded by

Copyright:

Available Formats

Drilling Machine

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Drilling Machine

Uploaded by

Copyright:

Available Formats

Drilling Machines

A drilling machine is a machine fitted with a cutting tool attachment or driving

The objectives of this lesson are to:

 Discuss the safety operating standards of drilling machines;

Portable hand drilling machine Portable magnetic drilling

drill chuck body handle feed handle motor controls

Pillar drilling machine Radial drilling machine

reposition the arm, a table which clamps to the base.

A drilling machine is an important tool that is used in manufacturing and

You might also like