Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
24 views

Computer Architecture - Lecture 03

This document discusses computer architecture and instruction execution. It provides an overview of computer components and the von Neumann architecture. It also describes the general purpose processor and how it fetches and executes instructions in a sequential manner. The document outlines the instruction cycle states and explains interrupts and how they allow other modules to interrupt normal processor execution.

Uploaded by

Md Masum
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
24 views

Computer Architecture - Lecture 03

This document discusses computer architecture and instruction execution. It provides an overview of computer components and the von Neumann architecture. It also describes the general purpose processor and how it fetches and executes instructions in a sequential manner. The document outlines the instruction cycle states and explains interrupts and how they allow other modules to interrupt normal processor execution.

Uploaded by

Md Masum
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 18

Computer

Architecture
Lecture 03
Instruction
Execution
Instructor: Sultana Jahan Soheli
Assistant Professor, ICE, NSTU
Reference Books
• Computer Organization and
Designing for Performance- William
Architecture:
Stallings
(8th Edition)
– Any later edition is fine
Overview
• At a top level, a computer consists of CPU
(central processing unit), memory, and I/O
components, with one or more modules of each type
• These components are interconnected in some
fashion to achieve the basic function of the computer
• At a top level, we can describe a computer system by
1. Describing the external behavior of each component
— that is, the data and control signals that it
exchanges with other components; and
2. Describing the interconnection and the
controls requiredstructure
to manage the use of
interconnection the
structure
Overview
• Virtually all contemporary computer designs are
based on concepts developed by John von
Neumann at the Institute for Advanced Studies,
Princeton
• Such a design is referred to as the von Neumann
architecture and is based on three key concepts:
– Data and instructions are stored in a single
read–write
memory
– The contents of this memory are addressable by
location, without regard to the type of data contained
there
– Execution occurs in a sequential fashion (unless
explicitly modified) from one instruction to the next
Types of Programming
• Two types:
– Hardwired Programming
– Software Programming
GP Processor
• Figure b indicates two major components of
the system: an instruction interpreter and a
module of general-purpose arithmetic and logic
functions
– These two constitute the CPU
• Several other components are needed to yield
a
functioning computer
• Data and instructions must be put into the system
• and results must
A place be shown in realizable forms
is also for storing the data and
– We need I/O module for that
needed
instructions
• We need Memory for that
GP Processor
GP Processor
• Figure illustrates these top-level components
• CPU exchanges data with memory
• For this purpose, it typically makes use of two internal
(to the CPU) registers: a memory address
register (MAR), which specifies the address in
memory for the next read or write, and a
memory buffer register (MBR), which contains the
data to be written into memory or receives the data
read from memory
• Similarly, an I/O address register (I/OAR)
specifies a
particular I/O device
• An I/O buffer (I/OBR) register is used for the
exchange of data between an I/O module and the CPU
Function of GPP
• The basic function performed by a computer
is execution of a program, which consists of a set
of instructions stored in memory
• In its simplest form, instruction processing consists
of two steps:
• The processor reads (fetches) instructions
from
memory one at a time and executes each instruction
• Program execution consists of repeating the process
of
instruction fetch and instruction execution
• The processing required for a single instruction is
called an instruction cycle
Instruction Fetch and Execute

• In a typical processor, a register called the program


counter (PC) holds the address of the instruction to be
fetched next
• Unless told otherwise, the processor always increments the
PC after each instruction fetch so that it will fetch the next
instruction in sequence
Instruction Fetch and Execute
• The fetched instruction is loaded into a register
in
the processor known as the instruction register (IR)
• The instruction contains bits that specify the action
the processor is to take
• In– general,
Processor- these actions
Data mayfall
beinto four categories:
transferred from processor to
memory:
memory or from memory to processor
– Processor-I/O: Data may be transferred to or from a peripheral
device
by transferring between the processor and an I/O module
– Data processing: The processor may perform some arithmetic or
logic operation on data
– Control: An instruction may specify that the sequence of execution
Instruction Fetch and Execute
• For example, the processor may fetch an
instruction from location 149, which specifies
that the next instruction be from location
182. The processor will remember this
fact by setting the program counter to 182
• Thus, on the next fetch cycle, the
instruction will be fetched from location 182
rather than 150
A Hypothetical Processor
A Hypothetical Processor
Instruction Cycle State
Diagram
Instruction Cycle States
• Instruction address calculation (iac)
• Instruction fetch (if)
• Instruction operation decoding
(iod)
• Operand address calculation (oac)
• Operand fetch (of)
• Data operation (do)
• Operand store (os)
Interrupts
• Virtually all computers provide a
mechanism
by which other modules (I/O, memory) may
interrupt the normal processing the
of processor
• Interrupts are provided primarily as a way
to improve processing efficiency
• For details, refer to textbook
Assignment 1
• Write a short article on Interrupt
mechanism
found insure
• Make Processors
that your article covers the
following topics:
– Concept of Interrupt
– Instruction Cycle State Diagram with
interrupt
– Transfer of control with interrupt
– Applications

You might also like