Showing 1–13 of 13 results for author: Albrecht, K

On the convergence of generalized kernel-based interpolation by greedy data selection algorithms

Authors: Kristof Albrecht, Armin Iske

Abstract: Besides standard Lagrange interpolation, i.e., interpolation of target functions from scattered point evaluations, positive definite kernel functions are well-suited for the solution of more general reconstruction problems. This is due to the intrinsic structure of the underlying reproducing kernel Hilbert space (RKHS). In fact, kernel-based interpolation has been applied to the reconstruction of… ▽ More Besides standard Lagrange interpolation, i.e., interpolation of target functions from scattered point evaluations, positive definite kernel functions are well-suited for the solution of more general reconstruction problems. This is due to the intrinsic structure of the underlying reproducing kernel Hilbert space (RKHS). In fact, kernel-based interpolation has been applied to the reconstruction of bivariate functions from scattered Radon samples in computerized tomography (cf. Iske, 2018) and, moreover, to the numerical solution of elliptic PDEs (cf. Wenzel et al., 2022). As shown in various previous contributions, numerical algorithms and theoretical results from kernel-based Lagrange interpolation can be transferred to more general interpolation problems. In particular, greedy point selection methods were studied in (Wenzel et al., 2022), for the special case of Sobolev kernels. In this paper, we aim to develop and analyze more general kernel-based interpolation methods, for less restrictive settings. To this end, we first provide convergence results for generalized interpolation under minimalistic assumptions on both the selected kernel and the target function. Finally, we prove convergence of popular greedy data selection algorithms for totally bounded sets of functionals. Supporting numerical results are provided for illustration. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Heat Transfer Coefficients of Moving Particle Beds from Flow-Dependent Particle Bed Thermal Conductivity and Near-Wall Resistance

Authors: Sarath R. Adapa, Xintong Zhang, Tianshi Feng, Ka Man Chung, Kevin J. Albrecht, Clifford K. Ho, Dimitri A. Madden, Renkun Chen

Abstract: Determination of heat transfer coefficients for flowing packed particle beds is essential to the design of particle heat exchangers, and other thermal processes. While such dense granular flows fall into the well-known plug-flow regime, the discrete nature of granular materials alters the thermal transport processes in both the near-wall and bulk regions of flowing particle beds from their station… ▽ More Determination of heat transfer coefficients for flowing packed particle beds is essential to the design of particle heat exchangers, and other thermal processes. While such dense granular flows fall into the well-known plug-flow regime, the discrete nature of granular materials alters the thermal transport processes in both the near-wall and bulk regions of flowing particle beds from their stationary counterparts. As a result, heat transfer correlations based on the stationary particle bed thermal conductivity could be inadequate for flowing particles in a heat exchanger. Earlier works have achieved reasonable agreement with experiments by treating granular media as a plug-flow continuum with a near-wall thermal resistance in series. However, the properties of the continuum were often obtained from measurements on stationary beds owing to the difficulty of flowing bed measurements. In this work, it was found that the properties of a stationary bed are highly sensitive to the method of particle packing and there is a decrease in the particle bed thermal conductivity and increase in the near-wall thermal resistance, measured as an effective air gap thickness, on the onset of particle flow. These variations in the thermophysical properties of stationary and flowing particle beds can lead to errors in heat transfer coefficient calculations. Therefore, the heat transfer coefficients for granular flows were calculated using experimentally determined flowing particle bed thermal conductivity and near-wall air gap for ceramic particles -CARBOCP40/100(275 um), HSP40/70(404um) and HSP16/30(956um); at velocities of 5-15mms-1; and temperatures of 300-650C. The thermal conductivity and air gap values for CP40/100 and HSP40/70 were further used to calculate heat transfer coefficients across different particle bed temperatures and velocities for different parallel-plate heat exchanger dimensions. △ Less

Submitted 27 May, 2024; v1 submitted 28 March, 2024; originally announced March 2024.

Product kernels are efficient and flexible tools for high-dimensional scattered interpolation

Authors: Kristof Albrecht, Juliane Entzian, Armin Iske

Abstract: This work concerns the construction and characterization of product kernels for multivariate approximation from a finite set of discrete samples. To this end, we consider composing different component kernels, each acting on a low-dimensional Euclidean space. Due to Aronszajn (1950), the product of positive semi-definite kernel functions is again positive semi-definite, where, moreover, the corres… ▽ More This work concerns the construction and characterization of product kernels for multivariate approximation from a finite set of discrete samples. To this end, we consider composing different component kernels, each acting on a low-dimensional Euclidean space. Due to Aronszajn (1950), the product of positive semi-definite kernel functions is again positive semi-definite, where, moreover, the corresponding native space is a particular instance of a tensor product, referred to as Hilbert tensor product. We first analyze the general problem of multivariate interpolation by product kernels. Then, we further investigate the tensor product structure, in particular for grid-like samples. We use this case to show that the product of strictly positive definite kernel functions is again strictly positive definite. Moreover, we develop an efficient computation scheme for the well-known Newton basis. Supporting numerical examples show the good performance of product kernels, especially for their flexibility. △ Less

Submitted 15 December, 2023; originally announced December 2023.

Micromechanical Origin of Heat Transfer to Granular Flow

Authors: Xintong Zhang, Sarath Adapa, Tianshi Feng, Jian Zeng, Ka Man Chung, Clifford Ho, Kevin Albrecht, Renkun Chen

Abstract: Heat transfer to a granular flow is comprised of two resistances in series: near the wall and within the bulk particle bed, neither of which is well understood due to the lack of experimental probes to separate their respective contribution. Here, we use a frequency modulated photothermal technique to separately quantify the thermal resistances in the near-wall and the bulk bed regions of particle… ▽ More Heat transfer to a granular flow is comprised of two resistances in series: near the wall and within the bulk particle bed, neither of which is well understood due to the lack of experimental probes to separate their respective contribution. Here, we use a frequency modulated photothermal technique to separately quantify the thermal resistances in the near-wall and the bulk bed regions of particles in flowing states. Compared to the stationary state, the flowing leads to a higher near-wall resistance and a lower thermal conductivity of bulk beds. Coupled with discrete element method simulation, we show that the near-wall resistance can be explained by particle diffusion in granular flows. △ Less

Submitted 28 May, 2024; v1 submitted 19 November, 2023; originally announced November 2023.

Comments: 15 pages, 5 figures

Öffentliche Daten auf die nächste Stufe heben -- Vom RESTful Webservice für Pflanzenschutzmittelregistrierungsdaten zur anwendungsunabhängigen Ontologie (erweiterte Version)

Authors: Katharina Albrecht, Kristoffer Janis Schneider, Daniel Martini

Abstract: During the application of chemical pesticides, distance requirements have to be considered. However, these have to be determined and considered by the farmer manually. To support the farmer the Pesticide Application Manager (PAM)-Projects were conducted and a decision support system was developed. A part of this system, the distance requirements service was developed at the KTBL. To provide this s… ▽ More During the application of chemical pesticides, distance requirements have to be considered. However, these have to be determined and considered by the farmer manually. To support the farmer the Pesticide Application Manager (PAM)-Projects were conducted and a decision support system was developed. A part of this system, the distance requirements service was developed at the KTBL. To provide this service, the PAM-prozess is conducted: the pesticide registration data provided via REST-API is crawled, then the data is mapped into an ontology using rmlmapper and made availabe in a machine readable and application-independent form via a SPARQL-Endpoint. △ Less

Submitted 17 January, 2023; originally announced January 2023.

Comments: 14 Pages, in German language, 6 figures

Measurement and Analysis of Thermal Conductivity of Ceramic Particle Beds for Solar Thermal Energy Storage

Authors: Ka Man Chung, Jian Zeng, Sarath Reddy Adapa, Tianshi Feng, Malavika V. Bagepalli, Peter G. Loutzenhiser, Kevin J. Albrecht, Clifford K. Ho, Renkun Chen

Abstract: A systematic study was performed to measure the effective thermal conductivity of ceramic particle beds, a promising heat transfer and thermal energy storage media for concentrating solar power (CSP). The thermal conductivity of the ceramic particle beds was measured using a transient hot-wire (THW) method within a temperature range of room temperature to 700 oC, the target operating temperature o… ▽ More A systematic study was performed to measure the effective thermal conductivity of ceramic particle beds, a promising heat transfer and thermal energy storage media for concentrating solar power (CSP). The thermal conductivity of the ceramic particle beds was measured using a transient hot-wire (THW) method within a temperature range of room temperature to 700 oC, the target operating temperature of the next-generation CSP systems. Two different types of ceramic particles were examined: (1) CARBOBEAD HSP 40/70 and (2) CARBOBEAD CP 40/100 with the average particle sizes of ~ 400 μm and ~280 μm, respectively, and thermal conductivities ranging from ~0.25 W m-1 K-1 to ~0.50 W m-1 K-1 from 20 oC to 700 oC in both air and N2 gas. The gaseous pressure dependence of the thermal conductivity of the ceramic particle beds was also studied in the N2 environment to differentiate the contributions from gas conduction, solid conduction, and radiation. Calculations using the Zehner, Bauer, and Schlünder (ZBS) model showed good agreements with the measurements. Based on the model, it is concluded that the effective thermal conductivity of the packed particle beds is dominated by the gas conduction while the solid conduction and radiation contributes to about 20% of the effective thermal conductivity at high temperature. △ Less

Submitted 5 May, 2021; originally announced May 2021.

Comments: Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, California 92093, USA Georgia Institute of Technology, Atlanta, Georgia 30332-0405, USA Sandia National Laboratories, 1515 Eubank Blvd. SE, Albuquerque, NM 87123, USA #Corresponding author: rkchen@ucsd.edu

A hyperelastic model for simulating cells in flow

Authors: Sebastian J. Müller, Franziska Weigl, Carina Bezold, Ana Sancho, Christian Bächer, Krystyna Albrecht, Stephan Gekle

Abstract: In the emerging field of 3D bioprinting, cell damage due to large deformations is considered a main cause for cell death and loss of functionality inside the printed construct. Those deformations, in turn, strongly depend on the mechano-elastic response of the cell to the hydrodynamic stresses experienced during printing. In this work, we present a numerical model to simulate the deformation of bi… ▽ More In the emerging field of 3D bioprinting, cell damage due to large deformations is considered a main cause for cell death and loss of functionality inside the printed construct. Those deformations, in turn, strongly depend on the mechano-elastic response of the cell to the hydrodynamic stresses experienced during printing. In this work, we present a numerical model to simulate the deformation of biological cells in arbitrary three-dimensional flows. We consider cells as an elastic continuum according to the hyperelastic Mooney-Rivlin model. We then employ force calculations on a tetrahedralized volume mesh. To calibrate our model, we perform a series of FluidFM(R) compression experiments with REF52 cells demonstrating that all three parameters of the Mooney-Rivlin model are required for a good description of the experimental data at very large deformations up to 80%. In addition, we validate the model by comparing to previous AFM experiments on bovine endothelial cells and artificial hydrogel particles. To investigate cell deformation in flow, we incorporate our model into Lattice Boltzmann simulations via an Immersed-Boundary algorithm. In linear shear flows, our model shows excellent agreement with analytical calculations and previous simulation data. △ Less

Submitted 18 December, 2020; v1 submitted 6 March, 2020; originally announced March 2020.

Comments: 15 pages, 9 figures, Supplementary information included. Unfortunately, the journal version misses an important contributor. The correct author list is the one given in this document. Biomech Model Mechanobiol (2020)

The Network Behind the Cosmic Web

Authors: B. C. Coutinho, Sungryong Hong, Kim Albrecht, Arjun Dey, Albert-László Barabási, Paul Torrey, Mark Vogelsberger, Lars Hernquist

Abstract: The concept of the cosmic web, viewing the Universe as a set of discrete galaxies held together by gravity, is deeply engrained in cosmology. Yet, little is known about the most effective construction and the characteristics of the underlying network. Here we explore seven network construction algorithms that use various galaxy properties, from their location, to their size and relative velocity,… ▽ More The concept of the cosmic web, viewing the Universe as a set of discrete galaxies held together by gravity, is deeply engrained in cosmology. Yet, little is known about the most effective construction and the characteristics of the underlying network. Here we explore seven network construction algorithms that use various galaxy properties, from their location, to their size and relative velocity, to assign a network to galaxy distributions provided by both simulations and observations. We find that a model relying only on spatial proximity offers the best correlations between the physical characteristics of the connected galaxies. We show that the properties of the networks generated from simulations and observations are identical, unveiling a deep universality of the cosmic web. △ Less

Submitted 12 April, 2016; v1 submitted 11 April, 2016; originally announced April 2016.

Comments: 5 pages, 4 figures

Local density of states on a vibrational quantum dot out of equilibrium

Authors: Klaus Ferdinand Albrecht, Alvaro Martin-Rodero, Johannes Schachenmayer, Lothar Mühlbacher

Abstract: We calculate the nonequilibrium local density of states on a vibrational quantum dot coupled to two electrodes at T=0 using a numerically exact diagrammatic Monte Carlo method. Our focus is on the interplay between the electron-phonon interaction strength and the bias voltage. We find that the spectral density exhibits a significant voltage dependence if the voltage window includes one or more pho… ▽ More We calculate the nonequilibrium local density of states on a vibrational quantum dot coupled to two electrodes at T=0 using a numerically exact diagrammatic Monte Carlo method. Our focus is on the interplay between the electron-phonon interaction strength and the bias voltage. We find that the spectral density exhibits a significant voltage dependence if the voltage window includes one or more phonon sidebands. A comparison with well-established approximate approaches indicates that this effect could be attributed to the nonequilibrium distribution of the phonons. Moreover, we discuss the long transient dynamics caused by the electron-phonon coupling. △ Less

Submitted 1 March, 2015; originally announced March 2015.

Comments: 9 pages, 11 figures

Journal ref: Phys. Rev. B 91, 064305 (2015)

Transient dynamics and steady state behavior of the Anderson-Holstein model with a superconducting lead

Authors: K. F. Albrecht, H. Soller, L. Muehlbacher, A. Komnik

Abstract: We analyze the nonequilibrium dynamics and steady-state behavior of the two-terminal Anderson-Holstein model with a superconducting and a normal conducting lead. In the deep Kondo limit we develop an analytical description if no phonons are included and a rate equation approach when phonons are present. Both cases are compared with the numerically exact diagrammatic Monte Carlo method obtaining a… ▽ More We analyze the nonequilibrium dynamics and steady-state behavior of the two-terminal Anderson-Holstein model with a superconducting and a normal conducting lead. In the deep Kondo limit we develop an analytical description if no phonons are included and a rate equation approach when phonons are present. Both cases are compared with the numerically exact diagrammatic Monte Carlo method obtaining a good agreement. For small voltages we find a pronounced enhancement of phonon sidebands due to the SC DOS. △ Less

Submitted 25 May, 2013; originally announced May 2013.

Comments: 11 pages, 9 figures, accepted for publication in Physica E

Journal ref: Physica E, 54:15-23, 2013

Long transient dynamics in the Anderson-Holstein model out of equilibrium

Authors: Klaus Ferdinand Albrecht, Alvaro Martin-Rodero, Rosa Carmina Monreal, Lothar Mühlbacher, Alfredo Levy Yeyati

Abstract: We calculate the time dependent nonequilibrium current through a single level quantum dot strongly coupled to a vibrational mode. The nonequilibrium real time dynamics caused by an instantaneous coupling of the leads to the quantum dot is discussed using an approximate method. The approach, which is specially designed for the strong polaronic regime, is based on the so-called polaron tunneling app… ▽ More We calculate the time dependent nonequilibrium current through a single level quantum dot strongly coupled to a vibrational mode. The nonequilibrium real time dynamics caused by an instantaneous coupling of the leads to the quantum dot is discussed using an approximate method. The approach, which is specially designed for the strong polaronic regime, is based on the so-called polaron tunneling approximation. Considering different initial dot occupations, we show that a common steady state is reached after times much larger than the typical electron tunneling times due to a polaron blocking effect in the dot charge. A direct comparison is made with numerically exact data, showing good agreement for the time scales accessible by the diagrammatic Monte Carlo simulation method. △ Less

Submitted 13 February, 2013; originally announced February 2013.

Bistability signatures in nonequilibrium charge transport through molecular quantum dots

Authors: Klaus Ferdinand Albrecht, Haobin Wang, Lothar Muehlbacher, Michael Thoss, Andreas Komnik

Abstract: We investigate the transient nonequilibrium dynamics of a molecular junction biased by a finite voltage and strongly coupled to internal vibrational degrees of freedom. Using two different, numerical exact techniques, diagrammatic Monte Carlo and the multilayer multiconfiguration time-dependent Hartree method, we show that the steady state current through the junction may depend sensitively on the… ▽ More We investigate the transient nonequilibrium dynamics of a molecular junction biased by a finite voltage and strongly coupled to internal vibrational degrees of freedom. Using two different, numerical exact techniques, diagrammatic Monte Carlo and the multilayer multiconfiguration time-dependent Hartree method, we show that the steady state current through the junction may depend sensitively on the initial preparation of the system, thus revealing signatures of bistability. The influence of the bias voltage and the transient dynamics on the phenomenon of bistability is analyzed. Furthermore, a possible relation to the phenomenon of stochastic switching in nanoelectromecanical devices is discussed. △ Less

Submitted 20 June, 2012; originally announced June 2012.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. B 86, 081412(R) (2012)

Entropy, Transinformation and Word Distribution of Information-Carrying Sequences

Authors: Werner Ebeling, Thorsten Poeschel, Karl-Friedrich Albrecht

Abstract: We investigate correlations in information carriers, e.g. texts and pieces of music, which are represented by strings of letters. For information carrying strings generated by one source (i.e. a novel or a piece of music) we find correlations on many length scales. The word distribution, the higher order entropies and the transinformation are calculated. The analogy to strings generated through… ▽ More We investigate correlations in information carriers, e.g. texts and pieces of music, which are represented by strings of letters. For information carrying strings generated by one source (i.e. a novel or a piece of music) we find correlations on many length scales. The word distribution, the higher order entropies and the transinformation are calculated. The analogy to strings generated through symbolic dynamics by nonlinear systems in critical states is discussed. △ Less

Submitted 2 April, 2002; originally announced April 2002.

Comments: 9 pages, 8 figures

Journal ref: Int. J. Bifurcation and Chaos, Vol. 5, 51 (1995)