Leveraging Energy Saving Capabilities of Current EEE Interfaces via Pre-Coalescing
Authors:
Miguel Rodríguez Pérez,
Sergio Herrería Alonso,
Raúl F. Rodríguez Rubio,
José Carlos López Ardao
Abstract:
The low power idle mode implemented by Energy Efficient Ethernet (EEE) allows network interfaces to save up to 90% of their nominal energy consumption when idling. There is an ample body of research that recommends the use of frame coalescing algorithms---that enter the low power mode as soon as there is no more traffic waiting to be sent, and delay the exit from this mode until there is an accept…
▽ More
The low power idle mode implemented by Energy Efficient Ethernet (EEE) allows network interfaces to save up to 90% of their nominal energy consumption when idling. There is an ample body of research that recommends the use of frame coalescing algorithms---that enter the low power mode as soon as there is no more traffic waiting to be sent, and delay the exit from this mode until there is an acceptable amount of traffic queued---to minimize energy usage while maintaining an acceptable performance. However, EEE capable hardware from several manufactures delays the entrance to the low power mode for a considerable amount of time (hysteresis). In this paper we augment existing EEE energy models to account for the hysteresis delay and show that, using the configuration ranges provided by manufacturers, most existing EEE networking devices are unable to obtain significant energy savings. To improve their energy efficiency, we propose to implement frame coalescing directly at traffic sources, before reaching the network interface. We also derive the optimum coalescing parameters to obtain a given target energy consumption at the EEE device when its configuration parameters are known in advance.
△ Less
Submitted 6 June, 2020; v1 submitted 27 May, 2020;
originally announced May 2020.
Generation of keV hot near-solid density plasma states at high contrast laser-matter interaction
Authors:
O. N. Rosmej,
Z. Samsonova,
S. Höfer,
D. Kartashov,
C. Arda,
D. Khaghani,
A. Schoenlein,
S. Zähter,
A. Hoffmann,
R. Loetzsch,
I. Uschmann,
M. E. Povarnitsyn,
N. E. Andreev,
L. P. Pugachev,
M. C. Kaluza,
C. Spielmann
Abstract:
We present experimental evidence of ultra-high energy density plasma states with the keV bulk electron temperatures and near-solid electron densities generated during the interaction of high contrast, relativistically intense laser pulses with planar metallic foils. The bulk electron temperature and density have been measured using x-ray spectroscopy tools; the temperature of supra-thermal electro…
▽ More
We present experimental evidence of ultra-high energy density plasma states with the keV bulk electron temperatures and near-solid electron densities generated during the interaction of high contrast, relativistically intense laser pulses with planar metallic foils. The bulk electron temperature and density have been measured using x-ray spectroscopy tools; the temperature of supra-thermal electrons traversing the target was determined from measured bremsstrahlung spectra; run-away electrons were detected using magnet spectrometers. The measured electron energy distribution was in a good agreement with results of Particle-in-Cell (PIC) simulations. Analysis of the bremsstrahlung spectra and results on measurements of the run-away electrons showed a suppression of the hot electrons production in the case of the high laser contrast. By application of Ti-foils covered with nm-thin Fe-layers we demonstrated that the thickness of the created keV hot dense plasma does not exceed 150 nm. Results of the pilot hydro-dynamic simulations that are based on a wide-range two-temperature EOS, wide-range description of all transport and optical properties, ionization, electron and radiative heating, plasma expansion, and Maxwell equations (with a wide-range permittivity) for description of the laser absorption are in excellent agreement with experimental results. According to these simulations, the generation of keV-hot bulk electrons is caused by the collisional mechanism of the laser pulse absorption in plasmas with a near solid step-like electron density profile. The laser energy firstly deposited into the nm-thin skin-layer is then transported into the target depth by the electron heat conductivity. This scenario is opposite to the volumetric character of the energy deposition produced by supra-thermal electrons.
△ Less
Submitted 20 April, 2018;
originally announced April 2018.
