-
Towards Chirality Control of Graphene Nanoribbons Embedded in Hexagonal Boron Nitride
Authors:
Hui Shan Wang,
Lingxiu Chen,
Kenan Elibol,
Li He,
Haomin Wang,
Chen Chen,
Chengxin Jiang,
Chen Li,
Tianru Wu,
Chun Xiao Cong,
Timothy J. Pennycook,
Giacomo Argentero,
Daoli Zhang,
Kenji Watanabe,
Takashi Taniguchi,
Wenya Wei,
Qinghong Yuan,
Jannik C. Meyer,
Xiaoming Xie
Abstract:
The integrated inplane growth of two dimensional materials with similar lattices, but distinct electrical properties, could provide a promising route to achieve integrated circuitry of atomic thickness. However, fabrication of edge specific GNR in the lattice of hBN still remains an enormous challenge for present approaches. Here we developed a two step growth method and successfully achieved sub…
▽ More
The integrated inplane growth of two dimensional materials with similar lattices, but distinct electrical properties, could provide a promising route to achieve integrated circuitry of atomic thickness. However, fabrication of edge specific GNR in the lattice of hBN still remains an enormous challenge for present approaches. Here we developed a two step growth method and successfully achieved sub 5 nm wide zigzag and armchair GNRs embedded in hBN, respectively. Further transport measurements reveal that the sub 7 nm wide zigzag GNRs exhibit openings of the band gap inversely proportional to their width, while narrow armchair GNRs exhibit some fluctuation in the bandgap width relationship.This integrated lateral growth of edge specific GNRs in hBN brings semiconducting building blocks to atomically thin layer, and will provide a promising route to achieve intricate nanoscale electrical circuits on high quality insulating hBN substrates.
△ Less
Submitted 27 September, 2020;
originally announced September 2020.
-
Revealing the 3D Structure of Graphene Defects
Authors:
Christoph Hofer,
Christian Kramberger,
Mohammad Reza Ahmadpour Monazam,
Clemens Mangler,
Andreas Mittelberger,
Giacomo Argentero,
Jani Kotakoski,
Jannik C. Meyer
Abstract:
We demonstrate insights into the three-dimensional structure of defects in graphene, in particular grain boundaries, obtained via a new approach from two transmission electron microscopy images recorded at different angles. The structure is obtained through an optimization process where both the atomic positions as well as the simulated imaging parameters are iteratively changed until the best pos…
▽ More
We demonstrate insights into the three-dimensional structure of defects in graphene, in particular grain boundaries, obtained via a new approach from two transmission electron microscopy images recorded at different angles. The structure is obtained through an optimization process where both the atomic positions as well as the simulated imaging parameters are iteratively changed until the best possible match to the experimental images is found. We first demonstrate that this method works using an embedded defect in graphene that allows direct comparison to the computationally predicted three-dimensional shape. We then applied the method to a set of grain boundary structures with misorientation angles nearly spanning the whole available range (2.6-29.8°). The measured height variations at the boundaries reveal a strong correlation with the misorientation angle with lower angles resulting in stronger corrugation and larger kink angles. Our results allow for the first time a direct comparison with theoretical predictions for the corrugation at grain boundaries and we show that the measured kink angles are significantly smaller than the largest predicted ones.
△ Less
Submitted 2 July, 2018;
originally announced July 2018.
-
Atomic structure of intrinsic and electron-irradiation-induced defects in MoTe2
Authors:
Kenan Elibol,
Toma Susi,
Giacomo Argentero,
Mohammad Reza Ahmadpour Monazam,
Timothy John Pennycook,
Jannik C. Meyer,
Jani Kotakoski
Abstract:
Studying the atomic structure of intrinsic defects in two-dimensional transition metal dichalcogenides is difficult since they damage quickly under the intense electron irradiation in transmission electron microscopy (TEM). However, this can also lead to insights into the creation of defects and their atom-scale dynamics. We first show that MoTe 2 monolayers without protection indeed quickly degra…
▽ More
Studying the atomic structure of intrinsic defects in two-dimensional transition metal dichalcogenides is difficult since they damage quickly under the intense electron irradiation in transmission electron microscopy (TEM). However, this can also lead to insights into the creation of defects and their atom-scale dynamics. We first show that MoTe 2 monolayers without protection indeed quickly degrade during scanning TEM (STEM) imaging, and discuss the observed atomic-level dynamics, including a transformation from the 1H phase into 1T', three-fold rotationally symmetric defects, and the migration of line defects between two 1H grains with a 60° misorientation. We then analyze the atomic structure of MoTe2 encapsulated between two graphene sheets to mitigate damage, finding the as-prepared material to contain an unexpectedly large concentration of defects. These include similar point defects (or quantum dots, QDs) as those created in the non-encapsulated material, and two different types of line defects (or quantum wires, QWs) that can be transformed from one to the other under electron irradiation. Our density functional theory simulations indicate that the QDs and QWs embedded in MoTe2 introduce new midgap states into the semiconducting material, and may thus be used to control its electronic and optical properties. Finally, the edge of the encapsulated material appears amorphous, possibly due to the pressure caused by the encapsulation.
△ Less
Submitted 5 February, 2018;
originally announced February 2018.
-
Unraveling the 3D atomic structure of a suspended graphene/hBN van der Waals heterostructure
Authors:
G. Argentero,
A. Mittelberger,
M. R. A. Monazam,
Y. Cao,
T. J. Pennycook,
C. Mangler,
C. Kramberger,
J. Kotakoski,
A. K. Geim,
J. C. Meyer
Abstract:
In this work we demonstrate that a free-standing van der Waals heterostructure, usually regarded as a flat object, can exhibit an intrinsic buckled atomic structure resulting from the interaction between two layers with a small lattice mismatch. We studied a freely suspended membrane of well aligned graphene on a hexagonal boron nitride (hBN) monolayer by transmission electron microscopy (TEM) and…
▽ More
In this work we demonstrate that a free-standing van der Waals heterostructure, usually regarded as a flat object, can exhibit an intrinsic buckled atomic structure resulting from the interaction between two layers with a small lattice mismatch. We studied a freely suspended membrane of well aligned graphene on a hexagonal boron nitride (hBN) monolayer by transmission electron microscopy (TEM) and scanning TEM (STEM). We developed a detection method in the STEM that is capable of recording the direction of the scattered electron beam and that is extremely sensitive to the local stacking of atoms. Comparison between experimental data and simulated models shows that the heterostructure effectively bends in the out-of-plane direction, producing an undulated structure having a periodicity that matches the moiré wavelength. We attribute this rippling to the interlayer interaction and also show how this affects the intralayer strain in each layer.
△ Less
Submitted 9 February, 2017;
originally announced February 2017.
-
Isotope analysis in the transmission electron microscope
Authors:
Toma Susi,
Christoph Hofer,
Giacomo Argentero,
Gregor T. Leuthner,
Timothy J. Pennycook,
Clemens Mangler,
Jannik C. Meyer,
Jani Kotakoski
Abstract:
The Ångström-sized probe of the scanning transmission electron microscope can visualize and collect spectra from single atoms. This can unambiguously resolve the chemical structure of materials, but not their isotopic composition. Here we differentiate between two isotopes of the same element by quantifying how likely the energetic imaging electrons are to eject atoms. First, we measure the displa…
▽ More
The Ångström-sized probe of the scanning transmission electron microscope can visualize and collect spectra from single atoms. This can unambiguously resolve the chemical structure of materials, but not their isotopic composition. Here we differentiate between two isotopes of the same element by quantifying how likely the energetic imaging electrons are to eject atoms. First, we measure the displacement probability in graphene grown from either $^{12}$C or $^{13}$C and describe the process using a quantum mechanical model of lattice vibrations coupled with density functional theory simulations. We then test our spatial resolution in a mixed sample by ejecting individual atoms from nanoscale areas spanning an interface region that is far from atomically sharp, mapping the isotope concentration with a precision better than 20%. Although we use a scanning instrument, our method should be applicable to any atomic resolution transmission electron microscope and to other low-dimensional materials.
△ Less
Submitted 16 August, 2016;
originally announced August 2016.
-
Towards weighing individual atoms by high-angle scattering of electrons
Authors:
G. Argentero,
C. Mangler,
J. Kotakoski,
F. R. Eder,
J. C. Meyer
Abstract:
We consider theoretically the energy loss of electrons scattered to high angles when assuming that the primary beam can be limited to a single atom. We discuss the possibility of identifying the isotopes of light elements and of extracting information about phonons in this signal. The energy loss is related to the mass of the much heavier nucleus, and is spread out due to atomic vibrations. Import…
▽ More
We consider theoretically the energy loss of electrons scattered to high angles when assuming that the primary beam can be limited to a single atom. We discuss the possibility of identifying the isotopes of light elements and of extracting information about phonons in this signal. The energy loss is related to the mass of the much heavier nucleus, and is spread out due to atomic vibrations. Importantly, while the width of the broadening is much larger than the energy separation of isotopes, only the shift in the peak positions must be detected if the beam is limited to a single atom. We conclude that the experimental case will be challenging but is not excluded by the physical principles as far as considered here. Moreover, the initial experiments demonstrate the separation of gold and carbon based on a signal that is related to their mass, rather than their atomic number.
△ Less
Submitted 22 January, 2015;
originally announced January 2015.
-
CO Induced Adatom Sintering in a Model Catalyst: Pd/Fe3O4
Authors:
Gareth S. Parkinson,
Zbynek Novotny,
Giacomo Argentero,
Michael Schmid,
Jiří Pavelec,
Rukan Kosak,
Peter Blaha,
Ulrike Diebold
Abstract:
The coarsening of catalytically-active metal clusters is often accelerated by the presence of gases through the formation of mobile intermediates, though the exact mechanism through which this happens is often subject to debate. We use scanning tunneling microscopy (STM) to follow the CO induced coalescence of Pd adatoms supported on the Fe3O4(001) surface at room temperature. We show that highly-…
▽ More
The coarsening of catalytically-active metal clusters is often accelerated by the presence of gases through the formation of mobile intermediates, though the exact mechanism through which this happens is often subject to debate. We use scanning tunneling microscopy (STM) to follow the CO induced coalescence of Pd adatoms supported on the Fe3O4(001) surface at room temperature. We show that highly-mobile Pd-carbonyl species, formed via the so-called skyhook effect, are temporarily trapped at other Pd adatoms. Once these reach a critical density, clusters nucleate; subsequent coarsening occurs through cluster diffusion and coalescence. While CO increases the mobility in the Pd/Fe3O4 system, surface hydroxyls have the opposite effect. Pd atoms transported to surface OH groups are no longer susceptible to the skyhook effect and remain isolated. Following the evolution from well-dispersed metal adatoms into clusters, atom-by-atom, allows identification of the key processes that underlie gas-induced mass transport.
△ Less
Submitted 4 March, 2013;
originally announced March 2013.
-
Ordered Array of Single Adatoms with Remarkable Thermal Stability: Au/Fe3O4(001)
Authors:
Zbyněk Novotný,
Giacomo Argentero,
Zhiming Wang,
Michael Schmid,
Ulrike Diebold,
Gareth S. Parkinson
Abstract:
Gold deposited on the Fe$_3$O$_4$(001) surface at room temperature was studied using Scanning Tunneling Microscopy (STM) and X-ray photoelectron spectroscopy (XPS). This surface forms a ($\sqrt2 \times \sqrt2$)R45$^{\circ}$ reconstruction, where pairs of Fe and neighboring O ions are slightly displaced laterally producing undulating rows with `narrow' and `wide' hollow sites. At low coverages, sin…
▽ More
Gold deposited on the Fe$_3$O$_4$(001) surface at room temperature was studied using Scanning Tunneling Microscopy (STM) and X-ray photoelectron spectroscopy (XPS). This surface forms a ($\sqrt2 \times \sqrt2$)R45$^{\circ}$ reconstruction, where pairs of Fe and neighboring O ions are slightly displaced laterally producing undulating rows with `narrow' and `wide' hollow sites. At low coverages, single Au adatoms adsorb exclusively at the narrow sites, with no significant sintering up to annealing temperatures of 400 $^{\circ}$C. We propose the strong site preference to be related to charge and orbital ordering within the first subsurface layer of Fe$_3$O$_4$(001)-($\sqrt2 \times \sqrt2$)R45$^{\circ}$. Due to its high thermal stability, this could prove an ideal model system for probing the chemical reactivity of single atomic species.
△ Less
Submitted 4 May, 2012;
originally announced May 2012.
-
Ordered Array of Single Au Adatoms with Remarkable Thermal Stability: Au/Fe3O4(001)
Authors:
Zbyněk Novotný,
Giacomo Argentero,
Zhiming Wang,
Michael Schmid,
Ulrike Diebold,
Gareth S. Parkinson
Abstract:
We present a Scanning Tunneling Microscopy (STM) investigation of gold deposited at the magnetite Fe3O4(001) surface at room temperature. This surface forms a reconstruction with (\surd2\times\surd2)R45° symmetry, where pairs of Fe and neighboring O ions are slightly displaced laterally, forming undulating rows with 'narrow' and 'wide' adsorption sites. At fractional monolayer coverages, single Au…
▽ More
We present a Scanning Tunneling Microscopy (STM) investigation of gold deposited at the magnetite Fe3O4(001) surface at room temperature. This surface forms a reconstruction with (\surd2\times\surd2)R45° symmetry, where pairs of Fe and neighboring O ions are slightly displaced laterally, forming undulating rows with 'narrow' and 'wide' adsorption sites. At fractional monolayer coverages, single Au adatoms adsorb exclusively at the narrow sites, with no significant sintering up to annealing temperatures of 400 °C. The strong preference for this site is possibly related to charge and orbital ordering within the first subsurface layer of the reconstructed Fe3O4(001) surface. Because of their high thermal stability, the ordered Au atoms at Fe3O4(001)- (\surd2\times\surd2)R45° could provide useful for probing the chemical reactivity of single atomic species.
△ Less
Submitted 7 November, 2012; v1 submitted 26 March, 2012;
originally announced March 2012.