-
The Simons Observatory: component separation pipelines for B-modes
Authors:
Kevin Wolz,
Susanna Azzoni,
Carlos Hervías-Caimapo,
Josquin Errard,
Nicoletta Krachmalnicoff,
David Alonso,
Benjamin Beringue,
Emilie Hertig
Abstract:
The upcoming Simons Observatory (SO) Small Aperture Telescopes aim at observing the degree-scale anisotropies of the polarized CMB to constrain the primordial tensor-to-scalar ratio $r$ at the level of $σ(r=0)\lesssim0.003$ to probe models of the very early Universe. We present three complementary $r$ inference pipelines and compare their results on a set of sky simulations that allow us to explor…
▽ More
The upcoming Simons Observatory (SO) Small Aperture Telescopes aim at observing the degree-scale anisotropies of the polarized CMB to constrain the primordial tensor-to-scalar ratio $r$ at the level of $σ(r=0)\lesssim0.003$ to probe models of the very early Universe. We present three complementary $r$ inference pipelines and compare their results on a set of sky simulations that allow us to explore a number of Galactic foreground and instrumental noise models, relevant for SO. In most scenarios, the pipelines retrieve consistent and unbiased results. However, several complex foreground scenarios lead to a $>2σ$ bias on $r$ if analyzed with the default versions of these pipelines, highlighting the need for more sophisticated pipeline components that marginalize over foreground residuals. We present two such extensions, using power-spectrum-based and map-based methods, and show that they fully reduce the bias on $r$ to sub-sigma level in all scenarios, and at a moderate cost in terms of $σ(r)$.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
The European Low Frequency Survey on the Simons Array
Authors:
Aniello Mennella,
Kam Arnold,
Susanna Azzoni,
Carlo Baccigalupi,
A. J. Banday,
Rita Belén Barreiro,
Darcy Barron,
Marco Bersanelli,
Francisco J. Casas,
Sean Casey,
Elena de la Hoz,
Cristian Franceschet,
Michael E. Jones,
Ricardo T. Genóva-Santos,
R. Hoyland,
Adrian T. Lee,
Enrique Martinez-Gonzalez,
Filippo Montonati,
José-Alberto Rubiño-Martín,
Angela Taylor,
Patricio Vielva
Abstract:
In this paper we present the European Low Frequency Survey (ELFS), a project that will enable foregrounds-free measurements of the primordial $B$-mode polarization and a detection of the tensor-to-scalar ratio, $r$, to a level $σ(r) = 0.001$ by measuring the Galactic and extra-galactic emissions in the 5--120\,GHz frequency window. Indeed, the main difficulty in measuring the B-mode polarization c…
▽ More
In this paper we present the European Low Frequency Survey (ELFS), a project that will enable foregrounds-free measurements of the primordial $B$-mode polarization and a detection of the tensor-to-scalar ratio, $r$, to a level $σ(r) = 0.001$ by measuring the Galactic and extra-galactic emissions in the 5--120\,GHz frequency window. Indeed, the main difficulty in measuring the B-mode polarization comes from the fact that many other processes in the Universe also emit polarized microwaves, which obscure the faint Cosmic Microwave Background (CMB) signal. The first stage of this project is being carried out in synergy with the Simons Array (SA) collaboration, installing a 5.5--11\,GHz (X-band) coherent receiver at the focus of one of the three 3.5\,m SA telescopes in Atacama, Chile, followed by the installation of the QUIJOTE-MFI2 in the 10--20 GHz range. We designate this initial iteration of the ELFS program as ELFS-SA. The receivers are equipped with a fully digital back-end that will provide a frequency resolution of 1\,MHz across the band, allowing us to clean the scientific signal from unwanted radio frequency interference, particularly from low-Earth orbit satellite mega constellations. This paper reviews the scientific motivation for ELFS and its instrumental characteristics, and provides an update on the development of ELFS-SA.
△ Less
Submitted 25 June, 2024; v1 submitted 14 June, 2024;
originally announced June 2024.
-
The LiteBIRD mission to explore cosmic inflation
Authors:
T. Ghigna,
A. Adler,
K. Aizawa,
H. Akamatsu,
R. Akizawa,
E. Allys,
A. Anand,
J. Aumont,
J. Austermann,
S. Azzoni,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
S. Basak,
A. Basyrov,
S. Beckman,
M. Bersanelli,
M. Bortolami,
F. Bouchet,
T. Brinckmann,
P. Campeti,
E. Carinos,
A. Carones
, et al. (134 additional authors not shown)
Abstract:
LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-…
▽ More
LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$μ$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $δr = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5σ$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
The Simons Observatory: Combining delensing and foreground cleaning for improved constraints on inflation
Authors:
Emilie Hertig,
Kevin Wolz,
Toshiya Namikawa,
Antón Baleato Lizancos,
Susanna Azzoni,
Anthony Challinor
Abstract:
The Simons Observatory (SO), a next-generation ground-based CMB experiment in its final stages of construction, will target primordial $B$-modes with unprecedented sensitivity to set tight bounds on the amplitude of inflationary gravitational waves. Aiming to infer the tensor-to-scalar ratio $r$ with precision $σ(r=0) \leq 0.003$, SO will rely on powerful component-separation algorithms to disting…
▽ More
The Simons Observatory (SO), a next-generation ground-based CMB experiment in its final stages of construction, will target primordial $B$-modes with unprecedented sensitivity to set tight bounds on the amplitude of inflationary gravitational waves. Aiming to infer the tensor-to-scalar ratio $r$ with precision $σ(r=0) \leq 0.003$, SO will rely on powerful component-separation algorithms to distinguish the faint primordial signal from stronger sources of large-scale $B$-modes such as Galactic foregrounds and weak gravitational lensing. We present an analysis pipeline that performs delensing and foreground cleaning simultaneously by including multifrequency CMB data and a lensing $B$-mode template in a power-spectrum-based likelihood. Here, we demonstrate this algorithm on masked SO-like simulations containing inhomogeneous noise and non-Gaussian foregrounds. The lensing convergence is reconstructed from high-resolution simulations of the CMB and external mass tracers. Using optimized pixel weights for power spectrum estimation, the target precision for SO's nominal design is achieved and delensing reduces $σ(r)$ by 27-37%, depending on foreground complexity.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
The Simons Observatory: Combining cross-spectral foreground cleaning with multi-tracer $B$-mode delensing for improved constraints on inflation
Authors:
Emilie Hertig,
Kevin Wolz,
Toshiya Namikawa,
Antón Baleato Lizancos,
Susanna Azzoni,
Irene Abril-Cabezas,
David Alonso,
Carlo Baccigalupi,
Erminia Calabrese,
Anthony Challinor,
Josquin Errard,
Giulio Fabbian,
Baptiste Jost,
Nicoletta Krachmalnicoff,
Anto I. Lonappan,
Magdy Morshed,
Luca Pagano,
Blake Sherwin
Abstract:
The Simons Observatory (SO), due to start full science operations in early 2025, aims to set tight constraints on inflationary physics by inferring the tensor-to-scalar ratio $r$ from measurements of CMB polarization $B$-modes. Its nominal design targets a precision $σ(r=0) \leq 0.003$ without delensing. Achieving this goal and further reducing uncertainties requires the mitigation of other source…
▽ More
The Simons Observatory (SO), due to start full science operations in early 2025, aims to set tight constraints on inflationary physics by inferring the tensor-to-scalar ratio $r$ from measurements of CMB polarization $B$-modes. Its nominal design targets a precision $σ(r=0) \leq 0.003$ without delensing. Achieving this goal and further reducing uncertainties requires the mitigation of other sources of large-scale $B$-modes such as Galactic foregrounds and weak gravitational lensing. We present an analysis pipeline aiming to estimate $r$ by including delensing within a cross-spectral likelihood, and demonstrate it on SO-like simulations. Lensing $B$-modes are synthesised using internal CMB lensing reconstructions as well as Planck-like CIB maps and LSST-like galaxy density maps. This $B$-mode template is then introduced into SO's power-spectrum-based foreground-cleaning algorithm by extending the likelihood function to include all auto- and cross-spectra between the lensing template and the SAT $B$-modes. Within this framework, we demonstrate the equivalence of map-based and cross-spectral delensing and use it to motivate an optimized pixel-weighting scheme for power spectrum estimation. We start by validating our pipeline in the simplistic case of uniform foreground spectral energy distributions (SEDs). In the absence of primordial $B$-modes, $σ(r)$ decreases by 37% as a result of delensing. Tensor modes at the level of $r=0.01$ are successfully detected by our pipeline. Even with more realistic foreground models including spatial variations in the dust and synchrotron spectral properties, we obtain unbiased estimates of $r$ by employing the moment-expansion method. In this case, delensing-related improvements range between 27% and 31%. These results constitute the first realistic assessment of the delensing performance at SO's nominal sensitivity level. (Abridged)
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
LiteBIRD Science Goals and Forecasts: Improving Sensitivity to Inflationary Gravitational Waves with Multitracer Delensing
Authors:
T. Namikawa,
A. I. Lonappan,
C. Baccigalupi,
N. Bartolo,
D. Beck,
K. Benabed,
A. Challinor,
P. Diego-Palazuelos,
J. Errard,
S. Farrens,
A. Gruppuso,
N. Krachmalnicoff,
M. Migliaccio,
E. Martínez-González,
V. Pettorino,
G. Piccirilli,
M. Ruiz-Granda,
B. Sherwin,
J. Starck,
P. Vielva,
R. Akizawa,
A. Anand,
J. Aumont,
R. Aurlien,
S. Azzoni
, et al. (97 additional authors not shown)
Abstract:
We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become mo…
▽ More
We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become more and more limited by lensing. In this paper, we extend the analysis of the recent $LiteBIRD$ forecast paper to include multiple mass tracers, i.e., the CMB lensing maps from $LiteBIRD$ and CMB-S4-like experiment, cosmic infrared background, and galaxy number density from $Euclid$- and LSST-like survey. We find that multi-tracer delensing will further improve the constraint on $r$ by about $20\%$. In $LiteBIRD$, the residual Galactic foregrounds also significantly contribute to uncertainties of the $B$-modes, and delensing becomes more important if the residual foregrounds are further reduced by an improved component separation method.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
LiteBIRD Science Goals and Forecasts: A full-sky measurement of gravitational lensing of the CMB
Authors:
A. I. Lonappan,
T. Namikawa,
G. Piccirilli,
P. Diego-Palazuelos,
M. Ruiz-Granda,
M. Migliaccio,
C. Baccigalupi,
N. Bartolo,
D. Beck,
K. Benabed,
A. Challinor,
J. Errard,
S. Farrens,
A. Gruppuso,
N. Krachmalnicoff,
E. Martínez-González,
V. Pettorino,
B. Sherwin,
J. Starck,
P. Vielva,
R. Akizawa,
A. Anand,
J. Aumont,
R. Aurlien,
S. Azzoni
, et al. (97 additional authors not shown)
Abstract:
We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,μ$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map u…
▽ More
We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,μ$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map using only polarization data, even considering its limited capability to capture small-scale CMB anisotropies. In this paper, we investigate the ability to construct a full-sky lensing measurement in the presence of Galactic foregrounds, finding that several possible biases from Galactic foregrounds should be negligible after component separation by harmonic-space internal linear combination. We find that the signal-to-noise ratio of the lensing is approximately $40$ using only polarization data measured over $90\%$ of the sky. This achievement is comparable to $Planck$'s recent lensing measurement with both temperature and polarization and represents a four-fold improvement over $Planck$'s polarization-only lensing measurement. The $LiteBIRD$ lensing map will complement the $Planck$ lensing map and provide several opportunities for cross-correlation science, especially in the northern hemisphere.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
The European Low Frequency Survey
Authors:
Aniello Mennella,
Kam Arnold,
Susanna Azzoni,
Carlo Baccigalupi,
Anthony Banday,
R. Belen Barreiro,
Darcy Barron,
Marco Bersanelli,
Sean Casey,
Loris Colombo,
Elena de la Hoz,
Cristian Franceschet,
Michael E. Jones,
Ricardo T. Genova-Santos,
Roger J. Hoyland,
Adrian T. Lee,
Enrique Martinez-Gonzalez,
Filippo Montonati,
Jose-Alberto Rubino-Martin,
Angela Taylor,
Patricio Vielva
Abstract:
In this paper we present the European Low Frequency Survey (ELFS), a project that will enable foregrounds-free measurements of primordial $B$-mode polarization to a level 10$^{-3}$ by measuring the Galactic and extra-Galactic emissions in the 5--120\,GHz frequency window. Indeed, the main difficulty in measuring the B-mode polarization comes not just from its sheer faintness, but from the fact tha…
▽ More
In this paper we present the European Low Frequency Survey (ELFS), a project that will enable foregrounds-free measurements of primordial $B$-mode polarization to a level 10$^{-3}$ by measuring the Galactic and extra-Galactic emissions in the 5--120\,GHz frequency window. Indeed, the main difficulty in measuring the B-mode polarization comes not just from its sheer faintness, but from the fact that many other objects in the Universe also emit polarized microwaves, which mask the faint CMB signal. The first stage of this project will be carried out in synergy with the Simons Array (SA) collaboration, installing a 5.5--11 GHz coherent receiver at the focus of one of the three 3.5\,m SA telescopes in Atacama, Chile ("ELFS on SA"). The receiver will be equipped with a fully digital back-end based on the latest Xilinx RF System-on-Chip devices that will provide frequency resolution of 1\,MHz across the whole observing band, allowing us to clean the scientific signal from unwanted radio frequency interference, particularly from low-Earth orbit satellite mega-constellations. This paper reviews the scientific motivation for ELFS and its instrumental characteristics, and provides an update on the development of ELFS on SA.
△ Less
Submitted 22 November, 2023; v1 submitted 25 October, 2023;
originally announced October 2023.
-
The Simons Observatory: Beam characterization for the Small Aperture Telescopes
Authors:
Nadia Dachlythra,
Adriaan J. Duivenvoorden,
Jon E. Gudmundsson,
Matthew Hasselfield,
Gabriele Coppi,
Alexandre E. Adler,
David Alonso,
Susanna Azzoni,
Grace E. Chesmore,
Giulio Fabbian,
Ken Ganga,
Remington G. Gerras,
Andrew H. Jaffe,
Bradley R. Johnson,
Brian Keating,
Reijo Keskitalo,
Theodore S. Kisner,
Nicoletta Krachmalnicoff,
Marius Lungu,
Frederick Matsuda,
Sigurd Naess,
Lyman Page,
Roberto Puddu,
Giuseppe Puglisi,
Sara M. Simon
, et al. (5 additional authors not shown)
Abstract:
We use time-domain simulations of Jupiter observations to test and develop a beam reconstruction pipeline for the Simons Observatory Small Aperture Telescopes. The method relies on a map maker that estimates and subtracts correlated atmospheric noise and a beam fitting code designed to compensate for the bias caused by the map maker. We test our reconstruction performance for four different freque…
▽ More
We use time-domain simulations of Jupiter observations to test and develop a beam reconstruction pipeline for the Simons Observatory Small Aperture Telescopes. The method relies on a map maker that estimates and subtracts correlated atmospheric noise and a beam fitting code designed to compensate for the bias caused by the map maker. We test our reconstruction performance for four different frequency bands against various algorithmic parameters, atmospheric conditions and input beams. We additionally show the reconstruction quality as function of the number of available observations and investigate how different calibration strategies affect the beam uncertainty. For all of the cases considered, we find good agreement between the fitted results and the input beam model within a ~1.5% error for a multipole range l = 30 - 700 and an ~0.5% error for a multipole range l = 50 - 200. We conclude by using a harmonic-domain component separation algorithm to verify that the beam reconstruction errors and biases observed in our analysis do not significantly bias the Simons Observatory r-measurement.
△ Less
Submitted 7 May, 2024; v1 submitted 18 April, 2023;
originally announced April 2023.
-
Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations
Authors:
U. Fuskeland,
J. Aumont,
R. Aurlien,
C. Baccigalupi,
A. J. Banday,
H. K. Eriksen,
J. Errard,
R. T. Génova-Santos,
T. Hasebe,
J. Hubmayr,
H. Imada,
N. Krachmalnicoff,
L. Lamagna,
G. Pisano,
D. Poletti,
M. Remazeilles,
K. L. Thompson,
L. Vacher,
I. K. Wehus,
S. Azzoni,
M. Ballardini,
R. B. Barreiro,
N. Bartolo,
A. Basyrov,
D. Beck
, et al. (92 additional authors not shown)
Abstract:
LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertaint…
▽ More
LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, $δr$, down to $δr<0.001$. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust SED, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compare the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the HFT (High-Frequency Telescope) frequency range is shifted logarithmically towards higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measure the tensor-to-scalar ratio $r$ uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on $r$ after foreground cleaning may be reduced by as much as 30--50 % by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to better ability to discriminate between models through higher $χ^2$ sensitivity. (abridged)
△ Less
Submitted 15 August, 2023; v1 submitted 10 February, 2023;
originally announced February 2023.
-
The Simons Observatory: pipeline comparison and validation for large-scale B-modes
Authors:
K. Wolz,
S. Azzoni,
C. Hervias-Caimapo,
J. Errard,
N. Krachmalnicoff,
D. Alonso,
C. Baccigalupi,
A. Baleato Lizancos,
M. L. Brown,
E. Calabrese,
J. Chluba,
J. Dunkley,
G. Fabbian,
N. Galitzki,
B. Jost,
M. Morshed,
F. Nati
Abstract:
The upcoming Simons Observatory Small Aperture Telescopes aim at achieving a constraint on the primordial tensor-to-scalar ratio $r$ at the level of $σ(r=0)\lesssim0.003$, observing the polarized CMB in the presence of partial sky coverage, cosmic variance, inhomogeneous non-white noise, and Galactic foregrounds. We present three different analysis pipelines able to constrain $r$ given the latest…
▽ More
The upcoming Simons Observatory Small Aperture Telescopes aim at achieving a constraint on the primordial tensor-to-scalar ratio $r$ at the level of $σ(r=0)\lesssim0.003$, observing the polarized CMB in the presence of partial sky coverage, cosmic variance, inhomogeneous non-white noise, and Galactic foregrounds. We present three different analysis pipelines able to constrain $r$ given the latest available instrument performance, and compare their predictions on a set of sky simulations that allow us to explore a number of Galactic foreground models and elements of instrumental noise, relevant for the Simons Observatory. The three pipelines employ different combinations of parametric and non-parametric component separation at the map and power spectrum levels, and use B-mode purification to estimate the CMB B-mode power spectrum. We applied them to a common set of simulated realistic frequency maps, and compared and validated them with focus on their ability to extract robust constraints on the tensor-to-scalar ratio $r$. We evaluated their performance in terms of bias and statistical uncertainty on this parameter. In most of the scenarios the three methodologies achieve similar performance. Nevertheless, several simulations with complex foreground signals lead to a $>2σ$ bias on $r$ if analyzed with the default versions of these pipelines, highlighting the need for more sophisticated pipeline components that marginalize over foreground residuals. We show two such extensions, using power-spectrum-based and map-based methods, that are able to fully reduce the bias on $r$ below the statistical uncertainties in all foreground models explored, at a moderate cost in terms of $σ(r)$.
△ Less
Submitted 9 July, 2024; v1 submitted 8 February, 2023;
originally announced February 2023.
-
Cosmology with 6 parameters in the Stage-IV era: efficient marginalisation over nuisance parameters
Authors:
Boryana Hadzhiyska,
Kevin Wolz,
Susanna Azzoni,
David Alonso,
Carlos García-García,
Jaime Ruiz-Zapatero,
Anže Slosar
Abstract:
The analysis of photometric large-scale structure data is often complicated by the need to account for many observational and astrophysical systematics. The elaborate models needed to describe them often introduce many ``nuisance parameters'', which can be a major inhibitor of an efficient parameter inference. In this paper we introduce an approximate method to analytically marginalise over a larg…
▽ More
The analysis of photometric large-scale structure data is often complicated by the need to account for many observational and astrophysical systematics. The elaborate models needed to describe them often introduce many ``nuisance parameters'', which can be a major inhibitor of an efficient parameter inference. In this paper we introduce an approximate method to analytically marginalise over a large number of nuisance parameters based on the Laplace approximation. We discuss the mathematics of the method, its relation to concepts such as volume effects and profile likelihood, and show that it can be further simplified for calibratable systematics by linearising the dependence of the theory on the associated parameters. We quantify the accuracy of this approach by comparing it with traditional sampling methods in the context of existing data from the Dark Energy Survey, as well as futuristic Stage-IV photometric data. The linearised version of the method is able to obtain parameter constraints that are virtually equivalent to those found by exploring the full parameter space for a large number of calibratable nuisance parameters, while reducing the computation time by a factor 3-10. Furthermore, the non-linearised approach is able to analytically marginalise over a large number of parameters, returning constraints that are virtually indistinguishable from the brute-force method in most cases, accurately reproducing both the marginalised uncertainty on cosmological parameters, and the impact of volume effects associated with this marginalisation. We provide simple recipes to diagnose when the approximations made by the method fail and one should thus resort to traditional methods. The gains in sampling efficiency associated with this method enable the joint analysis of multiple surveys, typically hindered by the large number of nuisance parameters needed to describe them.
△ Less
Submitted 13 July, 2023; v1 submitted 27 January, 2023;
originally announced January 2023.
-
A hybrid map-$C_\ell$ component separation method for primordial CMB $B$-mode searches
Authors:
Susanna Azzoni,
David Alonso,
Maximilian H. Abitbol,
Josquin Errard,
Nicoletta Krachmalnicoff
Abstract:
The observation of the polarised emission from the Cosmic Microwave Background (CMB) from future ground-based and satellite-borne experiments holds the promise of indirectly detecting the elusive signal from primordial tensor fluctuations in the form of large-scale $B$-mode polarisation. Doing so, however, requires an accurate and robust separation of the signal from polarised Galactic foregrounds…
▽ More
The observation of the polarised emission from the Cosmic Microwave Background (CMB) from future ground-based and satellite-borne experiments holds the promise of indirectly detecting the elusive signal from primordial tensor fluctuations in the form of large-scale $B$-mode polarisation. Doing so, however, requires an accurate and robust separation of the signal from polarised Galactic foregrounds. We present a component separation method for multi-frequency CMB observations that combines some of the advantages of map-based and power-spectrum-based techniques, and which is direcly applicable to data in the presence of realistic foregrounds and instrumental noise. We demonstrate that the method is able to reduce the contamination from Galactic foregrounds below an equivalent tensor-to-scalar ratio $r_{\rm FG}\lesssim5\times10^{-4}$, as required for next-generation observatories, for a wide range of foreground models with varying degrees of complexity. This bias reduction is associated with a mild $\sim20-30\%$ increase in the final statistical uncertainties, and holds for large sky areas, and for experiments targeting both the reionisation and recombination bumps in the $B$-mode power spectrum.
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
-
Contribution to the 2022 Cosmology session of the 56th Rencontres de Moriond: Moment expansion of polarized dust SED: A new path towards capturing the CMB $B$-modes with LiteBIRD
Authors:
L. Vacher,
J. Aumont,
L. Montier,
S. Azzoni,
F. Boulanger,
M. Remazeilles
Abstract:
Characterizing accurately the polarized dust emission from our Galaxy will be decisive for the quest for the Cosmic Microwave Background (CMB) primordial $B$-modes. The incomplete modeling of its potentially complex spectral properties could lead to biases in the CMB polarization analyses and to a spurious detection of the tensor-to-scalar ratio $r$. Variations of the dust properties along and bet…
▽ More
Characterizing accurately the polarized dust emission from our Galaxy will be decisive for the quest for the Cosmic Microwave Background (CMB) primordial $B$-modes. The incomplete modeling of its potentially complex spectral properties could lead to biases in the CMB polarization analyses and to a spurious detection of the tensor-to-scalar ratio $r$. Variations of the dust properties along and between lines of sight lead to unavoidable distortions of the spectral energy distribution (SED) that can not be easily anticipated by standard component separation methods. This issue can be tackled using a moment expansion of the dust SED, an innovative parametrization method imposing minimal assumptions on the sky complexity. In the recent work [Vacher \emph{et al.} (2022)]\cite{Vacher_2022}, we apply this formalism to the $B$-mode cross-angular power spectra computed from simulated \lb{} polarization data at frequencies between 100 and 402\,GHz, containing CMB, dust and instrumental noise. Thanks to the moment expansion, we can measure an unbiased value of the tensor-to-scalar ratio with a dispersion compatible with the target values aimed by the instrument.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey
Authors:
LiteBIRD Collaboration,
E. Allys,
K. Arnold,
J. Aumont,
R. Aurlien,
S. Azzoni,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
N. Bartolo,
L. Bautista,
D. Beck,
S. Beckman,
M. Bersanelli,
F. Boulanger,
M. Brilenkov,
M. Bucher,
E. Calabrese,
P. Campeti,
A. Carones,
F. J. Casas,
A. Catalano,
V. Chan,
K. Cheung
, et al. (166 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects.
△ Less
Submitted 27 March, 2023; v1 submitted 6 February, 2022;
originally announced February 2022.
-
In-flight polarization angle calibration for LiteBIRD: blind challenge and cosmological implications
Authors:
Nicoletta Krachmalnicoff,
Tomotake Matsumura,
Elena de la Hoz,
Soumen Basak,
Alessandro Gruppuso,
Yuto Minami,
Carlo Baccigalupi,
Eiichiro Komatsu,
Enrique Martínez-González,
Patricio Vielva,
Jonathan Aumont,
Ragnhild Aurlien,
Susanna Azzoni,
Anthony J. Banday,
Rita B. Barreiro,
Nicola Bartolo,
Marco Bersanelli,
Erminia Calabrese,
Alessandro Carones,
Francisco J. Casas,
Kolen Cheung,
Yuji Chinone,
Fabio Columbro,
Paolo de Bernardis,
Patricia Diego-Palazuelos
, et al. (45 additional authors not shown)
Abstract:
We present a demonstration of the in-flight polarization angle calibration for the JAXA/ISAS second strategic large class mission, LiteBIRD, and estimate its impact on the measurement of the tensor-to-scalar ratio parameter, r, using simulated data. We generate a set of simulated sky maps with CMB and polarized foreground emission, and inject instrumental noise and polarization angle offsets to th…
▽ More
We present a demonstration of the in-flight polarization angle calibration for the JAXA/ISAS second strategic large class mission, LiteBIRD, and estimate its impact on the measurement of the tensor-to-scalar ratio parameter, r, using simulated data. We generate a set of simulated sky maps with CMB and polarized foreground emission, and inject instrumental noise and polarization angle offsets to the 22 (partially overlapping) LiteBIRD frequency channels. Our in-flight angle calibration relies on nulling the EB cross correlation of the polarized signal in each channel. This calibration step has been carried out by two independent groups with a blind analysis, allowing an accuracy of the order of a few arc-minutes to be reached on the estimate of the angle offsets. Both the corrected and uncorrected multi-frequency maps are propagated through the foreground cleaning step, with the goal of computing clean CMB maps. We employ two component separation algorithms, the Bayesian-Separation of Components and Residuals Estimate Tool (B-SeCRET), and the Needlet Internal Linear Combination (NILC). We find that the recovered CMB maps obtained with algorithms that do not make any assumptions about the foreground properties, such as NILC, are only mildly affected by the angle miscalibration. However, polarization angle offsets strongly bias results obtained with the parametric fitting method. Once the miscalibration angles are corrected by EB nulling prior to the component separation, both component separation algorithms result in an unbiased estimation of the r parameter. While this work is motivated by the conceptual design study for LiteBIRD, its framework can be broadly applied to any CMB polarization experiment. In particular, the combination of simulation plus blind analysis provides a robust forecast by taking into account not only detector sensitivity but also systematic effects.
△ Less
Submitted 21 January, 2022; v1 submitted 17 November, 2021;
originally announced November 2021.
-
Moment expansion of polarized dust SED: a new path towards capturing the CMB $B$-modes with $\textit{LiteBIRD}$
Authors:
L. Vacher,
J. Aumont,
L. Montier,
S. Azzoni,
F. Boulanger,
M. Remazeilles
Abstract:
Characterizing the polarized dust emission from our Galaxy will be decisive for the quest for the Cosmic Microwave Background (CMB) primordial $B$-modes. The incomplete modelling of its potentially complex spectral properties could lead to biases in the CMB polarization analyses and to a spurious detection of the tensor-to-scalar ratio $r$. It is crucial for future surveys like the $LiteBIRD$ sate…
▽ More
Characterizing the polarized dust emission from our Galaxy will be decisive for the quest for the Cosmic Microwave Background (CMB) primordial $B$-modes. The incomplete modelling of its potentially complex spectral properties could lead to biases in the CMB polarization analyses and to a spurious detection of the tensor-to-scalar ratio $r$. It is crucial for future surveys like the $LiteBIRD$ satellite, which aims at constraining the primordial signal leftover by Inflation with an accuracy on $r$ of the order 1e-3. Variations of the dust properties along and between lines of sight lead to distortions of the spectral energy distribution (SED) that can not be easily anticipated by standard component separation methods. This issue can be tackled with a moment expansion of the dust SED, an innovative parametrization method imposing minimal assumptions on the sky complexity. In this paper, we apply this formalism to the $B$-mode cross-angular power spectra computed from simulated $LiteBIRD$ polarization data at frequencies between 100 and 402 GHz, containing CMB, dust and instrumental noise. The spatial variation of the dust spectral parameters (spectral index $β$ and temperature $T$) in our simulations, lead to significant biases on $r$ if not properly taken into account. Performing the moment expansion in $β$, reduces the bias but do not lead to reliable enough estimates of $r$. We introduce for the first time the expansion of the cross-angular power spectra SED in $β$ and $T$, showing that, at the $LiteBIRD$ sensitivity, it is required to take into account the SED complexity due to temperature variations to prevent analysis biases on $r$. Thanks to this expansion and despite the existing correlations between some of the dust moments and the CMB signal, responsible for a rise of the error on $r$, we can measure an unbiased value of $r$ with an uncertainty of $σ(r)$=8.8e-4.
△ Less
Submitted 15 November, 2022; v1 submitted 15 November, 2021;
originally announced November 2021.
-
The Simons Observatory: Constraining inflationary gravitational waves with multi-tracer B-mode delensing
Authors:
Toshiya Namikawa,
Anton Baleato Lizancos,
Naomi Robertson,
Blake D. Sherwin,
Anthony Challinor,
David Alonso,
Susanna Azzoni,
Carlo Baccigalupi,
Erminia Calabrese,
Julien Carron,
Yuji Chinone,
Jens Chluba,
Gabriele Coppi,
Josquin Errard,
Giulio Fabbian,
Simone Ferraro,
Alba Kalaja,
Antony Lewis,
Mathew S. Madhavacheril,
P. Daniel Meerburg,
Joel Meyers,
Federico Nati,
Giorgio Orlando,
Davide Poletti,
Giuseppe Puglisi
, et al. (10 additional authors not shown)
Abstract:
We introduce and validate a delensing framework for the Simons Observatory (SO), which will be used to improve constraints on inflationary gravitational waves (IGWs) by reducing the lensing noise in measurements of the $B$-modes in CMB polarization. SO will initially observe CMB by using three small aperture telescopes and one large-aperture telescope. While polarization maps from small-aperture t…
▽ More
We introduce and validate a delensing framework for the Simons Observatory (SO), which will be used to improve constraints on inflationary gravitational waves (IGWs) by reducing the lensing noise in measurements of the $B$-modes in CMB polarization. SO will initially observe CMB by using three small aperture telescopes and one large-aperture telescope. While polarization maps from small-aperture telescopes will be used to constrain IGWs, the internal CMB lensing maps used to delens will be reconstructed from data from the large-aperture telescope. Since lensing maps obtained from the SO data will be noise-dominated on sub-degree scales, the SO lensing framework constructs a template for lensing-induced $B$-modes by combining internal CMB lensing maps with maps of the cosmic infrared background from Planck as well as galaxy density maps from the LSST survey. We construct a likelihood for constraining the tensor-to-scalar ratio $r$ that contains auto- and cross-spectra between observed $B$-modes and the lensing $B$-mode template. We test our delensing analysis pipeline on map-based simulations containing survey non-idealities, but that, for this initial exploration, does not include contamination from Galactic and extragalactic foregrounds. We find that the SO survey masking and inhomogeneous and atmospheric noise have very little impact on the delensing performance, and the $r$ constraint becomes $σ(r)\approx 0.0015$ which is close to that obtained from the idealized forecasts in the absence of the Galactic foreground and is nearly a factor of two tighter than without delensing. We also find that uncertainties in the external large-scale structure tracers used in our multi-tracer delensing pipeline lead to bias much smaller than the $1\,σ$ statistical uncertainties.
△ Less
Submitted 15 June, 2022; v1 submitted 19 October, 2021;
originally announced October 2021.
-
QUBIC IV: Performance of TES Bolometers and Readout Electronics
Authors:
M. Piat,
G. Stankowiak,
E. S. Battistelli,
P. de Bernardis,
G. D Alessandro,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
T. D. Hoang,
S. Marnieros,
S. Masi,
A. Mennella,
L. Mousset,
C. O Sullivan,
D. Prele,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade,
J. G. Alberro,
A. Almela,
G. Amico,
L. H. Arnaldi
, et al. (104 additional authors not shown)
Abstract:
A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are…
▽ More
A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry.
△ Less
Submitted 20 October, 2021; v1 submitted 17 January, 2021;
originally announced January 2021.
-
A minimal power-spectrum-based moment expansion for CMB B-mode searches
Authors:
S. Azzoni,
M. H. Abitbol,
D. Alonso,
A. Gough,
N. Katayama,
T. Matsumura
Abstract:
The characterization and modeling of polarized foregrounds has become a critical issue in the quest for primordial $B$-modes. A typical method to proceed is to factorize and parametrize the spectral properties of foregrounds and their scale dependence (i.e. assuming that foreground spectra are well described everywhere by their sky average). Since in reality foreground properties vary across the G…
▽ More
The characterization and modeling of polarized foregrounds has become a critical issue in the quest for primordial $B$-modes. A typical method to proceed is to factorize and parametrize the spectral properties of foregrounds and their scale dependence (i.e. assuming that foreground spectra are well described everywhere by their sky average). Since in reality foreground properties vary across the Galaxy, this assumption leads to inaccuracies in the model that manifest themselves as biases in the final cosmological parameters (in this case the tensor-to-scalar ratio $r$). This is particularly relevant for surveys over large fractions of the sky, such as the Simons Observatory (SO), where the spectra should be modeled over a distribution of parameter values. Here we propose a method based on the existing ``moment expansion'' approach to address this issue in a power-spectrum-based analysis that is directly applicable in ground-based multi-frequency data. Additionally, the method uses only a small set of parameters with simple physical interpretation, minimizing the impact of foreground uncertainties on the final $B$-mode constraints. We validate the method using SO-like simulated observations, recovering an unbiased estimate of the tensor-to-scalar ratio $r$ with standard deviation $σ(r)\simeq0.003$, compatible with official forecasts. When applying the method to the public BICEP2/Keck data, we find an upper bound $r<0.06$ ($95\%\,{\rm C.L.}$), compatible with the result found by BICEP2/Keck when parametrizing spectral index variations through a scale-independent frequency decorrelation parameter. We also discuss the formal similarities between the power spectrum-based moment expansion and methods used in the analysis of CMB lensing.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
The Simons Observatory: gain, bandpass and polarization-angle calibration requirements for B-mode searches
Authors:
Maximilian H. Abitbol,
David Alonso,
Sara M. Simon,
Jack Lashner,
Kevin T. Crowley,
Aamir M. Ali,
Susanna Azzoni,
Carlo Baccigalupi,
Darcy Barron,
Michael L. Brown,
Erminia Calabrese,
Julien Carron,
Yuji Chinone,
Jens Chluba,
Gabriele Coppi,
Kevin D. Crowley,
Mark Devlin,
Jo Dunkley,
Josquin Errard,
Valentina Fanfani,
Nicholas Galitzki,
Martina Gerbino,
J. Colin Hill,
Bradley R. Johnson,
Baptiste Jost
, et al. (23 additional authors not shown)
Abstract:
We quantify the calibration requirements for systematic uncertainties for next-generation ground-based observatories targeting the large-angle $B$-mode polarization of the Cosmic Microwave Background, with a focus on the Simons Observatory (SO). We explore uncertainties on gain calibration, bandpass center frequencies, and polarization angles, including the frequency variation of the latter across…
▽ More
We quantify the calibration requirements for systematic uncertainties for next-generation ground-based observatories targeting the large-angle $B$-mode polarization of the Cosmic Microwave Background, with a focus on the Simons Observatory (SO). We explore uncertainties on gain calibration, bandpass center frequencies, and polarization angles, including the frequency variation of the latter across the bandpass. We find that gain calibration and bandpass center frequencies must be known to percent levels or less to avoid biases on the tensor-to-scalar ratio $r$ on the order of $Δr\sim10^{-3}$, in line with previous findings. Polarization angles must be calibrated to the level of a few tenths of a degree, while their frequency variation between the edges of the band must be known to ${\cal O}(10)$ degrees. Given the tightness of these calibration requirements, we explore the level to which residual uncertainties on these systematics would affect the final constraints on $r$ if included in the data model and marginalized over. We find that the additional parameter freedom does not degrade the final constraints on $r$ significantly, broadening the error bar by ${\cal O}(10\%)$ at most. We validate these results by reanalyzing the latest publicly available data from the BICEP2/Keck collaboration within an extended parameter space covering both cosmological, foreground and systematic parameters. Finally, our results are discussed in light of the instrument design and calibration studies carried out within SO.
△ Less
Submitted 15 June, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
QUBIC I: Overview and ScienceProgram
Authors:
J. -Ch. Hamilton,
L. Mousset,
E. S. Battistelli,
M. -A. Bigot-Sazy,
P. Chanial,
R. Charlassier,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
M. M. Gamboa Lerena,
L. Grandsire,
S. Lau,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
M. Piat,
G. Riccardi,
C. Scóccola,
M. Stolpovskiy,
A. Tartari,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade
, et al. (105 additional authors not shown)
Abstract:
The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical fo…
▽ More
The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $σ(r)=0.015$.
△ Less
Submitted 26 August, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
QUBIC II: Spectro-Polarimetry with Bolometric Interferometry
Authors:
L. Mousset,
M. M. Gamboa Lerena,
E. S. Battistelli,
P. de Bernardis,
P. Chanial,
G. D'Alessandro,
G. Dashyan,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
F. Incardona,
S. Landau,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
M. Piat,
G. Ricciardi,
C. G. Scóccola,
M. Stolpovskiy,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni
, et al. (106 additional authors not shown)
Abstract:
Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foreg…
▽ More
Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust mapping and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC.
△ Less
Submitted 28 March, 2022; v1 submitted 28 October, 2020;
originally announced October 2020.
-
QUBIC VII: The feedhorn-switch system of the technological demonstrator
Authors:
F. Cavaliere,
A. Mennella,
M. Zannoni,
P. Battaglia,
E. S. Battistelli,
D. Burke,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
C. Franceschet,
L. Grandsire,
J. -Ch. Hamilton,
B. Maffei,
E. Manzan,
S. Marnieros,
S. Masi,
C. O'Sullivan,
A. Passerini,
F. Pezzotta,
M. Piat,
A. Tartari,
S. A. Torchinsky,
D. Viganò,
F. Voisin,
P. Ade
, et al. (106 additional authors not shown)
Abstract:
We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration…
▽ More
We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies.
△ Less
Submitted 1 April, 2022; v1 submitted 28 August, 2020;
originally announced August 2020.
-
QUBIC VI: cryogenic half wave plate rotator, design and performances
Authors:
G. D'Alessandro,
L. Mele,
F. Columbro,
G. Amico,
E. S. Battistelli,
P. de Bernardis,
A. Coppolecchia,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
L. Lamagna,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
A. Paiella,
F. Piacentini,
M. Piat,
G. Pisano,
G. Presta,
A. Tartari,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade
, et al. (104 additional authors not shown)
Abstract:
Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used t…
▽ More
Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1° in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K).
△ Less
Submitted 19 November, 2020; v1 submitted 24 August, 2020;
originally announced August 2020.
-
QUBIC V: Cryogenic system design and performance
Authors:
S. Masi,
E. S. Battistelli,
P. de Bernardis,
C. Chapron,
F. Columbro,
G. D'Alessandro,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
S. Marnieros,
L. Mele,
A. May,
A. Mennella,
C. O'Sullivan,
A. Paiella,
F. Piacentini,
M. Piat,
L. Piccirillo,
G. Presta,
A. Schillaci,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni
, et al. (104 additional authors not shown)
Abstract:
Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interfe…
▽ More
Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes.
△ Less
Submitted 25 August, 2021; v1 submitted 24 August, 2020;
originally announced August 2020.
-
QUBIC VIII: Optical design and performance
Authors:
C. O'Sullivan,
M. De Petris,
G. Amico,
E. S. Battistelli,
D. Burke,
D. Buzi,
C. Chapron,
L. Conversi,
G. D'Alessandro,
P. de Bernardis,
M. De Leo,
D. Gayer,
L. Grandsire,
J. -Ch. Hamilton,
S. Marnieros,
S. Masi,
A. Mattei,
A. Mennella,
L. Mousset,
J. D. Murphy,
A. Pelosi,
M. Perciballi,
M. Piat,
S. Scully,
A. Tartari
, et al. (104 additional authors not shown)
Abstract:
The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or p…
▽ More
The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or planned experiments using the novel technique of bolometric interferometry. This technique takes advantage of the sensitivity of an imager and the systematic error control of an interferometer. A cold reflective optical combiner superimposes there-emitted beams from 400 aperture feedhorns on two focal planes. A shielding system composedof a fixed groundshield, and a forebaffle that moves with the instrument, limits the impact of local contaminants. The modelling, design, manufacturing and preliminary measurements of the optical components are described in this paper.
△ Less
Submitted 25 August, 2021; v1 submitted 23 August, 2020;
originally announced August 2020.
-
QUBIC III: Laboratory Characterization
Authors:
S. A. Torchinsky,
J. -Ch. Hamilton,
M. Piat,
E. S. Battistelli,
C. Chapron,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
M. M. Gamboa Lerena,
M. González,
L. Grandsire,
S. Masi,
S. Marnieros,
A. Mennella,
L. Mousset,
J. D. Murphy,
D. Prêle,
G. Stankowiak,
C. O'Sullivan,
A. Tartari,
J. -P. Thermeau,
F. Voisin,
M. Zannoni,
P. Ade,
J. G. Alberro
, et al. (103 additional authors not shown)
Abstract:
A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam,…
▽ More
A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam, the measurement of interference fringes, and the measurement of polarization performance. A modulated and frequency tunable millimetre-wave source in the telescope far-field is used to simulate a point source. The QUBIC pointing is scanned across the point source to produce beam maps. Polarization modulation is measured using a rotating Half Wave Plate. The measured beam matches well to the theoretical simulations and gives QUBIC the ability to do spectro imaging. The polarization performance is excellent with less than 0.5\% cross-polarization rejection. QUBIC is ready for deployment on the high altitude site at Alto Chorillo, Argentina to begin scientific operations.
△ Less
Submitted 15 March, 2022; v1 submitted 23 August, 2020;
originally announced August 2020.
-
QUBIC: the Q & U Bolometric Interferometer for Cosmology
Authors:
E. S. Battistelli,
P. Ade,
J. G. Alberro,
A. Almela,
G. Amico,
L. H. Arnaldi,
D. Auguste,
J. Aumont,
S. Azzoni,
S. Banfi,
P. Battaglia,
A. Baù,
B. Bèlier,
D. Bennett,
L. Bergè,
J. -Ph. Bernard,
M. Bersanelli,
M. -A. Bigot-Sazy,
N. Bleurvacq,
J. Bonaparte,
J. Bonis,
A. Bottani,
E. Bunn,
D. Burke,
D. Buzi
, et al. (114 additional authors not shown)
Abstract:
The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addr…
▽ More
The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
QUBIC: using NbSi TESs with a bolometric interferometer to characterize the polarisation of the CMB
Authors:
M. Piat,
B. Bélier,
L. Bergé,
N. Bleurvacq,
C. Chapron,
S. Dheilly,
L. Dumoulin,
M. González,
L. Grandsire,
J. -Ch. Hamilton,
S. Henrot-Versillé,
D. T. Hoang,
S. Marnieros,
W. Marty,
L. Montier,
E. Olivieri,
C. Oriol,
C. Perbost,
D. Prêle,
D. Rambaud,
M. Salatino,
G. Stankowiak,
J. -P. Thermeau,
S. Torchinsky,
F. Voisin
, et al. (113 additional authors not shown)
Abstract:
QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detec…
▽ More
QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province.
The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128.
The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system.
△ Less
Submitted 9 December, 2019; v1 submitted 27 November, 2019;
originally announced November 2019.
