-
Novel Double Triple Bend Achromat (DTBA) lattice design for a next generation 3 GeV Synchrotron Light Source
Authors:
A. Alekou,
R. Bartolini,
N. Carmignani,
S. M. Liuzzo,
P. Raimondi,
T. Pulampong,
R. P. Walker
Abstract:
The Double Triple Bend Achromat (DTBA) lattice~\cite{DTBAipac16} is a novel lattice design for a next generation 3 GeV Synchrotron Light Source. Starting from a modification of the Hybrid Multi Bend Achromat (HMBA) lattice~\cite{ESRF} developed at ESRF and inspired by the Double-Double Bend Achromat (DDBA) lattice~\cite{Diamond1, Diamond2} developed at Diamond, DTBA combines the advantages of both…
▽ More
The Double Triple Bend Achromat (DTBA) lattice~\cite{DTBAipac16} is a novel lattice design for a next generation 3 GeV Synchrotron Light Source. Starting from a modification of the Hybrid Multi Bend Achromat (HMBA) lattice~\cite{ESRF} developed at ESRF and inspired by the Double-Double Bend Achromat (DDBA) lattice~\cite{Diamond1, Diamond2} developed at Diamond, DTBA combines the advantages of both cells. The typical MBA lattice cells have one straight section dedicated to an insertion device, whereas this new cell layout has two such drifts, thus increasing the fraction of available space for the installation of insertion devices. The DTBA lattice achieves an emittance of $\sim\mathrm{132~pm}$, a dynamic aperture of $\mathrm{\sim\pm10\pm1~mm}$ (calculated at the injection point), an injection efficiency of $\mathrm{\sim\mathrm88\pm5\%}$ and a lifetime of $\mathrm{1.4\pm0.2~h}$ with errors. The characteristics of DTBA, the methodology and results of the linear and non-linear optics optimisations, with and without the presence of errors, are presented in detail.
△ Less
Submitted 18 July, 2018; v1 submitted 8 January, 2018;
originally announced January 2018.
-
Multi-Pulse Laser Wakefield Acceleration: A New Route to Efficient, High-Repetition-Rate Plasma Accelerators and High Flux Radiation Sources
Authors:
S. M. Hooker,
R. Bartolini,
S. P. D. Mangles,
A. Tünnermann,
L. Corner,
J. Limpert,
A. Seryi,
R. Walczak
Abstract:
Laser-driven plasma accelerators can generate accelerating gradients three orders of magnitude larger than radio-frequency accelerators and have achieved beam energies above 1 GeV in centimetre long stages. However, the pulse repetition rate and wall-plug efficiency of plasma accelerators is limited by the driving laser to less than approximately 1 Hz and 0.1% respectively. Here we investigate the…
▽ More
Laser-driven plasma accelerators can generate accelerating gradients three orders of magnitude larger than radio-frequency accelerators and have achieved beam energies above 1 GeV in centimetre long stages. However, the pulse repetition rate and wall-plug efficiency of plasma accelerators is limited by the driving laser to less than approximately 1 Hz and 0.1% respectively. Here we investigate the prospects for exciting the plasma wave with trains of low-energy laser pulses rather than a single high-energy pulse. Resonantly exciting the wakefield in this way would enable the use of different technologies, such as fibre or thin-disc lasers, which are able to operate at multi-kilohertz pulse repetition rates and with wall-plug efficiencies two orders of magnitude higher than current laser systems. We outline the parameters of efficient, GeV-scale, 10-kHz plasma accelerators and show that they could drive compact X-ray sources with average photon fluxes comparable to those of third-generation light source but with significantly improved temporal resolution. Likewise FEL operation could be driven with comparable peak power but with significantly larger repetition rates than extant FELs.
△ Less
Submitted 30 January, 2014;
originally announced January 2014.
-
Numerical Analysis of Space Charge Effects in Electron Bunches at Laser-Driven Plasma Accelerators
Authors:
Anthony Ashmore,
Riccardo Bartolini,
Nicolas Delerue
Abstract:
Laser-driven Plasma Accelerators (LPA) have successfully generated high energy, high charge electron bunches which can reach many kA peak current, over short distances. Space charge issues, even in transport lines as simple as a drift section, have to be carefully taken into account since they can degrade the beam quality, preventing any further application of such electron beams. We analyse the s…
▽ More
Laser-driven Plasma Accelerators (LPA) have successfully generated high energy, high charge electron bunches which can reach many kA peak current, over short distances. Space charge issues, even in transport lines as simple as a drift section, have to be carefully taken into account since they can degrade the beam quality, preventing any further application of such electron beams. We analyse the space charge effects within an electron bunch with numerical simulations in order to assess their effect on the beam. We use LPA beam parameters published in previous experimental studies. These studies can give an indication of the working point where space charge can dominate the beam dynamics and has to be taken into account in the application of such beams.
△ Less
Submitted 22 November, 2010; v1 submitted 27 August, 2010;
originally announced August 2010.
-
Single shot emittance measurement using Optical Transition Radiation
Authors:
Nicolas Delerue,
Riccardo Bartolini,
Cyrille Thomas
Abstract:
We describe a method that uses Optical Transition Radiation (OTR) screens to measure in a single shot the emittance of an electron beam with an energy greater than 100 MeV. Our setup consists of 4 OTR screens located near a beam waist. A fit of the 4 profiles allows the reconstruction of the Twiss parameters and hence a calculation of the beam emittance. This layout has been simulated using Mathem…
▽ More
We describe a method that uses Optical Transition Radiation (OTR) screens to measure in a single shot the emittance of an electron beam with an energy greater than 100 MeV. Our setup consists of 4 OTR screens located near a beam waist. A fit of the 4 profiles allows the reconstruction of the Twiss parameters and hence a calculation of the beam emittance. This layout has been simulated using Mathematica to study its sensitivity to errors and using Geant4 to include effects due to the scattering of the electrons in the screens. Some assumptions made in this document are conservative to allow for unexpected experimental issues.
△ Less
Submitted 13 May, 2010;
originally announced May 2010.
