-
Angular dependent measurement of electron-ion recombination in liquid argon for ionization calorimetry in the ICARUS liquid argon time projection chamber
Authors:
ICARUS collaboration,
P. Abratenko,
N. Abrego-Martinez,
A. Aduszkiewicz,
F. Akbar,
L. Aliaga Soplin,
M. Artero Pons,
J. Asaadi,
W. F. Badgett,
B. Baibussinov,
B. Behera,
V. Bellini,
R. Benocci,
S. Berkman,
S. Bertolucci,
M. Betancourt,
M. Bonesini,
T. Boone,
B. Bottino,
A. Braggiotti,
D. Brailsford,
S. J. Brice,
V. Brio,
C. Brizzolari,
H. S. Budd A. Campani
, et al. (154 additional authors not shown)
Abstract:
This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are us…
▽ More
This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are used for the calorimetric energy scale calibration of the ICARUS TPC, which is also presented. The impact of the EMB model is studied on calorimetric particle identification, as well as muon and proton energy measurements. Accounting for the angular dependence in EMB recombination improves the accuracy and precision of these measurements.
△ Less
Submitted 17 July, 2024;
originally announced July 2024.
-
Calibration and simulation of ionization signal and electronics noise in the ICARUS liquid argon time projection chamber
Authors:
ICARUS collaboration,
P. Abratenko,
N. Abrego-Martinez,
A. Aduszkiewic,
F. Akbar,
L. Aliaga Soplin,
M. Artero Pons,
J. Asaadi,
W. F. Badgett,
B. Baibussinov,
B. Behera,
V. Bellini,
R. Benocci,
S. Berkman,
S. Bertolucci,
M. Betancourt,
M. Bonesini,
T. Boone,
B. Bottino,
A. Braggiotti,
D. Brailsford,
S. J. Brice,
V. Brio,
C. Brizzolari,
H. S. Budd
, et al. (154 additional authors not shown)
Abstract:
The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedu…
▽ More
The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedure removes non-uniformities in the ICARUS TPC response to charge in space and time. This work leverages the copious number of cosmic ray muons available to ICARUS at the surface. The ionization signal shape simulation applies a novel procedure that tunes the simulation to match what is measured in data. The end result of the equalization procedure and simulation tuning allows for a comparison of charge measurements in ICARUS between Monte Carlo simulation and data, showing good performance with minimal residual bias between the two.
△ Less
Submitted 19 July, 2024; v1 submitted 16 July, 2024;
originally announced July 2024.
-
A Photonic Integrated Circuit based Compressive Sensing Radio Frequency Receiver
Authors:
David B. Borlaug,
Steven Estrella,
Carl T. Boone,
George Sefler,
Thomas Justin Shaw,
Angsuman Roy,
Leif Johansson,
George C. Valley
Abstract:
A photonic integrated circuit comprised of an 11 cm multimode speckle waveguide, a 1x32 splitter, and a linear grating coupler array is fabricated and utilized to receive 2 GHz of RF signal bandwidth from 2.5 to 4.5 GHz using a 35 MHz mode locked laser.
A photonic integrated circuit comprised of an 11 cm multimode speckle waveguide, a 1x32 splitter, and a linear grating coupler array is fabricated and utilized to receive 2 GHz of RF signal bandwidth from 2.5 to 4.5 GHz using a 35 MHz mode locked laser.
△ Less
Submitted 21 October, 2020;
originally announced December 2020.
-
Overhaul and Installation of the ICARUS-T600 Liquid Argon TPC Electronics for the FNAL Short Baseline Neutrino Program
Authors:
L. Bagby,
B. Baibussinov,
B. Behera,
V. Bellini,
R. Benocci,
M. Betancourt,
M. Bettini,
M. Bonesini,
T. Boone,
A. Braggiotti,
J. D. Brown,
H. Budd,
F. Calaon,
L. Castellani,
S. Centro,
A. G. Cocco,
M. Convery,
F. Fabris,
A. Falcone,
C. Farnese,
A. Fava,
F. Fichera,
M. Giarin,
D. Gibin,
A. Guglielmi
, et al. (39 additional authors not shown)
Abstract:
The ICARUS T600 liquid argon (LAr) time projection chamber (TPC) underwent a major overhaul at CERN in 2016-2017 to prepare for the operation at FNAL in the Short Baseline Neutrino (SBN) program. This included a major upgrade of the photo-multiplier system and of the TPC wire read-out electronics. The full TPC wire read-out electronics together with the new wire biasing and interconnection scheme…
▽ More
The ICARUS T600 liquid argon (LAr) time projection chamber (TPC) underwent a major overhaul at CERN in 2016-2017 to prepare for the operation at FNAL in the Short Baseline Neutrino (SBN) program. This included a major upgrade of the photo-multiplier system and of the TPC wire read-out electronics. The full TPC wire read-out electronics together with the new wire biasing and interconnection scheme are described. The design of a new signal feed-through flange is also a fundamental piece of this overhaul whose major feature is the integration of all electronics components onto the signal flange. Initial functionality tests of the full TPC electronics chain installed in the T600 detector at FNAL are also described.
△ Less
Submitted 25 November, 2020; v1 submitted 5 October, 2020;
originally announced October 2020.
-
The DUNE Far Detector Interim Design Report, Volume 3: Dual-Phase Module
Authors:
DUNE Collaboration,
B. Abi,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
D. Adams,
P. Adamson,
M. Adinolfi,
Z. Ahmad,
C. H. Albright,
L. Aliaga Soplin,
T. Alion,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. P. Andrews,
R. A. Andrews,
A. Ankowski,
J. Anthony,
M. Antonello,
M. Antonova
, et al. (1076 additional authors not shown)
Abstract:
The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable…
▽ More
The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable the DUNE experiment to make the ground-breaking discoveries that will help to answer fundamental physics questions. Volume 3 describes the dual-phase module's subsystems, the technical coordination required for its design, construction, installation, and integration, and its organizational structure.
△ Less
Submitted 26 July, 2018;
originally announced July 2018.
-
The DUNE Far Detector Interim Design Report Volume 1: Physics, Technology and Strategies
Authors:
DUNE Collaboration,
B. Abi,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
D. Adams,
P. Adamson,
M. Adinolfi,
Z. Ahmad,
C. H. Albright,
L. Aliaga Soplin,
T. Alion,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. P. Andrews,
R. A. Andrews,
A. Ankowski,
J. Anthony,
M. Antonello,
M. Antonova
, et al. (1076 additional authors not shown)
Abstract:
The DUNE IDR describes the proposed physics program and technical designs of the DUNE Far Detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable…
▽ More
The DUNE IDR describes the proposed physics program and technical designs of the DUNE Far Detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable the DUNE experiment to make the ground-breaking discoveries that will help to answer fundamental physics questions. Volume 1 contains an executive summary that describes the general aims of this document. The remainder of this first volume provides a more detailed description of the DUNE physics program that drives the choice of detector technologies. It also includes concise outlines of two overarching systems that have not yet evolved to consortium structures: computing and calibration. Volumes 2 and 3 of this IDR describe, for the single-phase and dual-phase technologies, respectively, each detector module's subsystems, the technical coordination required for its design, construction, installation, and integration, and its organizational structure.
△ Less
Submitted 26 July, 2018;
originally announced July 2018.
-
The DUNE Far Detector Interim Design Report, Volume 2: Single-Phase Module
Authors:
DUNE Collaboration,
B. Abi,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
D. Adams,
P. Adamson,
M. Adinolfi,
Z. Ahmad,
C. H. Albright,
L. Aliaga Soplin,
T. Alion,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. P. Andrews,
R. A. Andrews,
A. Ankowski,
J. Anthony,
M. Antonello,
M. Antonova
, et al. (1076 additional authors not shown)
Abstract:
The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable…
▽ More
The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable the DUNE experiment to make the ground-breaking discoveries that will help to answer fundamental physics questions. Volume 2 describes the single-phase module's subsystems, the technical coordination required for its design, construction, installation, and integration, and its organizational structure.
△ Less
Submitted 26 July, 2018;
originally announced July 2018.
-
Photon detector system timing performance in the DUNE 35-ton prototype liquid argon time projection chamber
Authors:
D. L. Adams,
T. Alion,
J. T. Anderson,
L. Bagby,
M. Baird,
G. Barr,
N. Barros,
K. Biery,
A. Blake,
E. Blaufuss,
T. Boone,
A. Booth,
D. Brailsford,
N. Buchanan,
A. Chatterjee,
M. Convery,
J. Davies,
T. Dealtry,
P. DeLurgio,
G. Deuerling,
R. Dharmapalan,
Z. Djurcic,
G. Drake,
B. Eberly,
J. Freeman
, et al. (53 additional authors not shown)
Abstract:
The 35-ton prototype for the Deep Underground Neutrino Experiment far detector was a single-phase liquid argon time projection chamber with an integrated photon detector system, all situated inside a membrane cryostat. The detector took cosmic-ray data for six weeks during the period of February 1, 2016 to March 12, 2016. The performance of the photon detection system was checked with these data.…
▽ More
The 35-ton prototype for the Deep Underground Neutrino Experiment far detector was a single-phase liquid argon time projection chamber with an integrated photon detector system, all situated inside a membrane cryostat. The detector took cosmic-ray data for six weeks during the period of February 1, 2016 to March 12, 2016. The performance of the photon detection system was checked with these data. An installed photon detector was demonstrated to measure the arrival times of cosmic-ray muons with a resolution better than 32 ns, limited by the timing of the trigger system. A measurement of the timing resolution using closely-spaced calibration pulses yielded a resolution of 15 ns for pulses at a level of 6 photo-electrons. Scintillation light from cosmic-ray muons was observed to be attenuated with increasing distance with a characteristic length of $155 \pm 28$ cm.
△ Less
Submitted 5 June, 2018; v1 submitted 16 March, 2018;
originally announced March 2018.
-
The Single-Phase ProtoDUNE Technical Design Report
Authors:
B. Abi,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
D. L. Adams,
P. Adamson,
M. Adinolfi,
Z. Ahmad,
C. H. Albright,
T. Alion,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. P. Andrews,
R. A. Andrews,
J. dos Anjos,
A. Ankowski,
J. Anthony,
M. Antonello,
A. Aranda Fernandez,
A. Ariga,
T. Ariga,
E. Arrieta Diaz,
J. Asaadi
, et al. (806 additional authors not shown)
Abstract:
ProtoDUNE-SP is the single-phase DUNE Far Detector prototype that is under construction and will be operated at the CERN Neutrino Platform (NP) starting in 2018. ProtoDUNE-SP, a crucial part of the DUNE effort towards the construction of the first DUNE 10-kt fiducial mass far detector module (17 kt total LAr mass), is a significant experiment in its own right. With a total liquid argon (LAr) mass…
▽ More
ProtoDUNE-SP is the single-phase DUNE Far Detector prototype that is under construction and will be operated at the CERN Neutrino Platform (NP) starting in 2018. ProtoDUNE-SP, a crucial part of the DUNE effort towards the construction of the first DUNE 10-kt fiducial mass far detector module (17 kt total LAr mass), is a significant experiment in its own right. With a total liquid argon (LAr) mass of 0.77 kt, it represents the largest monolithic single-phase LArTPC detector to be built to date. It's technical design is given in this report.
△ Less
Submitted 27 July, 2017; v1 submitted 21 June, 2017;
originally announced June 2017.
-
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report Volume 1: The LBNF and DUNE Projects
Authors:
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
P. Adamson,
S. Adhikari,
Z. Ahmad,
C. H. Albright,
T. Alion,
E. Amador,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. Andrews,
R. Andrews,
I. Anghel,
J. d. Anjos,
A. Ankowski,
M. Antonello,
A. ArandaFernandez,
A. Ariga,
T. Ariga,
D. Aristizabal,
E. Arrieta-Diaz,
K. Aryal
, et al. (780 additional authors not shown)
Abstract:
This document presents the Conceptual Design Report (CDR) put forward by an international neutrino community to pursue the Deep Underground Neutrino Experiment at the Long-Baseline Neutrino Facility (LBNF/DUNE), a groundbreaking science experiment for long-baseline neutrino oscillation studies and for neutrino astrophysics and nucleon decay searches. The DUNE far detector will be a very large modu…
▽ More
This document presents the Conceptual Design Report (CDR) put forward by an international neutrino community to pursue the Deep Underground Neutrino Experiment at the Long-Baseline Neutrino Facility (LBNF/DUNE), a groundbreaking science experiment for long-baseline neutrino oscillation studies and for neutrino astrophysics and nucleon decay searches. The DUNE far detector will be a very large modular liquid argon time-projection chamber (LArTPC) located deep underground, coupled to the LBNF multi-megawatt wide-band neutrino beam. DUNE will also have a high-resolution and high-precision near detector.
△ Less
Submitted 20 January, 2016;
originally announced January 2016.
-
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report, Volume 4 The DUNE Detectors at LBNF
Authors:
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
P. Adamson,
S. Adhikari,
Z. Ahmad,
C. H. Albright,
T. Alion,
E. Amador,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. Andrews,
R. Andrews,
I. Anghel,
J. d. Anjos,
A. Ankowski,
M. Antonello,
A. ArandaFernandez,
A. Ariga,
T. Ariga,
D. Aristizabal,
E. Arrieta-Diaz,
K. Aryal
, et al. (779 additional authors not shown)
Abstract:
A description of the proposed detector(s) for DUNE at LBNF
A description of the proposed detector(s) for DUNE at LBNF
△ Less
Submitted 12 January, 2016;
originally announced January 2016.
-
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report Volume 2: The Physics Program for DUNE at LBNF
Authors:
DUNE Collaboration,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
P. Adamson,
S. Adhikari,
Z. Ahmad,
C. H. Albright,
T. Alion,
E. Amador,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. Andrews,
R. Andrews,
I. Anghel,
J. d. Anjos,
A. Ankowski,
M. Antonello,
A. ArandaFernandez,
A. Ariga,
T. Ariga,
D. Aristizabal,
E. Arrieta-Diaz
, et al. (780 additional authors not shown)
Abstract:
The Physics Program for the Deep Underground Neutrino Experiment (DUNE) at the Fermilab Long-Baseline Neutrino Facility (LBNF) is described.
The Physics Program for the Deep Underground Neutrino Experiment (DUNE) at the Fermilab Long-Baseline Neutrino Facility (LBNF) is described.
△ Less
Submitted 22 January, 2016; v1 submitted 18 December, 2015;
originally announced December 2015.
-
Nanomechanical detection of the spin Hall effect
Authors:
Joseph A. Boales,
Carl T. Boone,
Pritiraj Mohanty
Abstract:
The spin Hall effect creates a spin current in response to a charge current in a material that has strong spin-orbit coupling. The size of the spin Hall effect in many materials is disputed, requiring independent measurements of the effect. We develop a novel mechanical method to measure the size of the spin Hall effect, relying on the equivalence between spin and angular momentum. The spin curren…
▽ More
The spin Hall effect creates a spin current in response to a charge current in a material that has strong spin-orbit coupling. The size of the spin Hall effect in many materials is disputed, requiring independent measurements of the effect. We develop a novel mechanical method to measure the size of the spin Hall effect, relying on the equivalence between spin and angular momentum. The spin current carries angular momentum, so the flow of angular momentum will result in a mechanical torque on the material. We determine the size and geometry of this torque and demonstrate that it can be measured using a nanomechanical device. Our results show that measurement of the spin Hall effect in this manner is possible and also opens possibilities for actuating nanomechanical systems with spin currents.
△ Less
Submitted 9 May, 2016; v1 submitted 3 September, 2015;
originally announced September 2015.
-
Comparison of spin-orbit torques and spin pumping across NiFe/Pt and NiFe/Cu/Pt interfaces
Authors:
Tianxiang Nan,
Satoru Emori,
Carl T. Boone,
Xinjun Wang,
Trevor M. Oxholm,
John G. Jones,
Brandon M. Howe,
Gail J. Brown,
Nian X. Sun
Abstract:
We experimentally investigate spin-orbit torques and spin pumping in NiFe/Pt bilayers with direct and interrupted interfaces. The damping-like and field-like torques are simultaneously measured with spin-torque ferromagnetic resonance tuned by a dc bias current, whereas spin pumping is measured electrically through the inverse spin Hall effect using a microwave cavity. Insertion of an atomically t…
▽ More
We experimentally investigate spin-orbit torques and spin pumping in NiFe/Pt bilayers with direct and interrupted interfaces. The damping-like and field-like torques are simultaneously measured with spin-torque ferromagnetic resonance tuned by a dc bias current, whereas spin pumping is measured electrically through the inverse spin Hall effect using a microwave cavity. Insertion of an atomically thin Cu dusting layer at the interface reduces the damping-like torque, field-like torque, and spin pumping by nearly the same factor of ~1.4. This finding confirms that the observed spin-orbit torques predominantly arise from diffusive transport of spin current generated by the spin Hall effect. We also find that spin-current scattering at the NiFe/Pt interface contributes to additional enhancement in magnetization damping that is distinct from spin pumping.
△ Less
Submitted 12 February, 2016; v1 submitted 13 March, 2015;
originally announced March 2015.
-
Quantification of the spin-Hall anti-damping torque with a resonance spectrometer
Authors:
Satoru Emori,
Tianxiang Nan,
Trevor M. Oxholm,
Carl T. Boone,
John G. Jones,
Brandon M. Howe,
Gail J. Brown,
David E. Budil,
Nian X. Sun
Abstract:
We present a simple technique using a cavity-based resonance spectrometer to quantify the anti-damping torque due to the spin Hall effect. Modification of ferromagnetic resonance is observed as a function of small DC current in sub-mm-wide strips of bilayers, consisting of magnetically soft FeGaB and strong spin-Hall metal Ta. From the detected current-induced linewidth change, we obtain an effect…
▽ More
We present a simple technique using a cavity-based resonance spectrometer to quantify the anti-damping torque due to the spin Hall effect. Modification of ferromagnetic resonance is observed as a function of small DC current in sub-mm-wide strips of bilayers, consisting of magnetically soft FeGaB and strong spin-Hall metal Ta. From the detected current-induced linewidth change, we obtain an effective spin Hall angle of 0.08-0.09 independent of the magnetic layer thickness. Our results demonstrate that a sensitive resonance spectrometer can be a general tool to investigate spin Hall effects in various material systems, even those with vanishingly low conductivity and magnetoresistance.
△ Less
Submitted 22 November, 2014;
originally announced November 2014.
-
Spin-Scattering Rates in Metallic Thin Films Measured by Ferromagnetic Resonance Damping Enhanced by Spin-Pumping
Authors:
C. T. Boone,
J. M. Shaw,
H. T. Nembach,
T. J. Silva
Abstract:
We determined the spin-transport properties of Pd and Pt thin films by measuring the increase in ferromagnetic resonance damping due to spin-pumping in ferromagnetic (FM)-nonferromagnetic metal (NM) multilayers with varying NM thicknesses. The increase in damping with NM thickness depends strongly on both the spin- and charge-transport properties of the NM, as modeled by diffusion equations that i…
▽ More
We determined the spin-transport properties of Pd and Pt thin films by measuring the increase in ferromagnetic resonance damping due to spin-pumping in ferromagnetic (FM)-nonferromagnetic metal (NM) multilayers with varying NM thicknesses. The increase in damping with NM thickness depends strongly on both the spin- and charge-transport properties of the NM, as modeled by diffusion equations that include both momentum- and spin-scattering parameters. We use the analytical solution to the spin-diffusion equations to obtain spin-diffusion lengths for Pt and Pd. By measuring the dependence of conductivity on NM thickness, we correlate the charge- and spin-transport parameters, and validate the applicability of various models for momentum-scattering and spin-scattering rates in these systems: constant, inverse-proportional (Dyakanov-Perel), and linear-proportional (Elliot-Yafet). We confirm previous reports that the spin-scattering time can be shorter than the momentum scattering time in Pt, and the Dyakanov-Perel-like model is the best fit to the data.
△ Less
Submitted 16 June, 2015; v1 submitted 25 August, 2014;
originally announced August 2014.
-
Precise determination of the spectroscopic g-factor using broadband ferromagnetic resonance spectroscopy
Authors:
Justin M. Shaw,
Hans T. Nembach,
T. J. Silva,
Carl T. Boone
Abstract:
We demonstrate that the spectroscopic g-factor can be determined with high precision and accuracy by broadband ferromagnetic resonance measurements and applying an asymptotic analysis to the data. Spectroscopic data used to determine the g-factor is always obtained over a finite range of frequencies, which can result in significant errors in the fitted values of the spectroscopic g-factor. We show…
▽ More
We demonstrate that the spectroscopic g-factor can be determined with high precision and accuracy by broadband ferromagnetic resonance measurements and applying an asymptotic analysis to the data. Spectroscopic data used to determine the g-factor is always obtained over a finite range of frequencies, which can result in significant errors in the fitted values of the spectroscopic g-factor. We show that by applying an asymptotic analysis to broadband datasets, precise values of the intrinsic g-factor can be determined with errors well below 1 %, even when the exact form of the Kittel equation (which describes the relationship between the frequency and resonance field) is unknown. We demonstrate this methodology with measured data obtained for sputtered Ni80Fe20 ("Permalloy") thin films of varied thicknesses, where we determine the bulk g-factor value to be 2.109 +/- 0.003. Such an approach is further validated by application to simulated data that includes both noise and an anisotropy that is not included in the Kittel equation that was used in the analysis. Finally, we show a correlation of thickness and interface structure to the magnitude of the asymptotic behavior, which provide insight into additional mechanisms that may induce deviations from the Kittel equation.
△ Less
Submitted 28 October, 2013;
originally announced October 2013.
-
Spin transport parameters in metallic multilayers determined by ferromagnetic resonance measurements of spin pumping
Authors:
C. T. Boone,
H. T. Nembach,
J. M. Shaw,
T. J. Silva
Abstract:
We measured spin transport in nonferromagnetic (NM) metallic multilayers from the contribution to damping due to spin pumping from a ferromagnetic Co90Fe10 thin film. The multilayer stack consisted of NM1/NM2/Co90Fe10(2 nm)/NM2/NM3 with varying NM materials and thicknesses. Using conventional theory for one dimensional diffusive spin transport in metals, we show that the effective damping due to s…
▽ More
We measured spin transport in nonferromagnetic (NM) metallic multilayers from the contribution to damping due to spin pumping from a ferromagnetic Co90Fe10 thin film. The multilayer stack consisted of NM1/NM2/Co90Fe10(2 nm)/NM2/NM3 with varying NM materials and thicknesses. Using conventional theory for one dimensional diffusive spin transport in metals, we show that the effective damping due to spin pumping can be strongly affected by the spin transport properties of each NM in the multilayer, which permits the use of damping measurements to accurately determine the spin transport properties of the various NM layers in the full five-layer stack. We find that due to its high electrical resistivity, amorphous Ta is a poor spin conductor, in spite of a short spin-diffusion length of 1.0 nm, and that Pt is an excellent spin conductor by virtue of its low electrical resistivity and a spin diffusion length of only 0.5 nm. Spin Hall effect measurements may have underestimated the spin Hall angle in Pt by assuming a much longer spin diffusion length.
△ Less
Submitted 24 January, 2013;
originally announced January 2013.
-
Mode- and size-dependent Landau-Lifshitz damping in magnetic nanostructures: Evidence for non-local damping
Authors:
Hans T. Nembach,
Justin M. Shaw,
Carl T. Boone,
T. J. Silva
Abstract:
We demonstrate a strong dependence of the effective damping on the nanomagnet size and the particular spin-wave mode that can be explained by the theory of intralayer transverse-spin-pumping. The effective Landau-Lifshitz damping is measured optically in individual, isolated nanomagnets as small as 100 nm. The measurements are accomplished by use of a novel heterodyne magneto-optical microwave mic…
▽ More
We demonstrate a strong dependence of the effective damping on the nanomagnet size and the particular spin-wave mode that can be explained by the theory of intralayer transverse-spin-pumping. The effective Landau-Lifshitz damping is measured optically in individual, isolated nanomagnets as small as 100 nm. The measurements are accomplished by use of a novel heterodyne magneto-optical microwave microscope with unprecedented sensitivity. Experimental data reveal multiple standing spin-wave modes that we identify by use of micromagnetic modeling as having either localized or delocalized character, described generically as end- and center-modes. The damping parameter of the two modes depends on both the size of the nanomagnet as well as the particular spin-wave mode that is excited, with values that are enhanced by as much as 40% relative to that measured for an extended film. Contrary to expectations based on the ad hoc consideration of lithography-induced edge damage, the damping for the end-mode decreases as the size of the nanomagnet decreases. The data agree with the theory for damping caused by the flow of intralayer transverse spin-currents driven by the magnetization curvature. These results have serious implications for the performance of nanoscale spintronic devices such as spin-torque-transfer magnetic random access memory.
△ Less
Submitted 14 March, 2013; v1 submitted 30 October, 2012;
originally announced October 2012.
-
Stochastic resonance of a nanomagnet excited by spin transfer torque
Authors:
Xiao Cheng,
Carl T. Boone,
Jian Zhu,
I. N. Krivorotov
Abstract:
Spin transfer torque from spin-polarized electrical current can excite large-amplitude magnetization dynamics in metallic ferromagnets of nanoscale dimensions. Since magnetic anisotropy energies of nanomagnets are comparable to the thermal energy scale, temperature can have a profound effect on the dynamics of a nanomagnet driven by spin transfer torque. Here we report the observation of unusual…
▽ More
Spin transfer torque from spin-polarized electrical current can excite large-amplitude magnetization dynamics in metallic ferromagnets of nanoscale dimensions. Since magnetic anisotropy energies of nanomagnets are comparable to the thermal energy scale, temperature can have a profound effect on the dynamics of a nanomagnet driven by spin transfer torque. Here we report the observation of unusual types of microwave-frequency nonlinear magnetization dynamics co-excited by alternating spin transfer torque and thermal fluctuations. In these dynamics, temperature amplifies the amplitude of GHz-range precession of magnetization and enables excitation of highly nonlinear dynamical states of magnetization by weak alternating spin transfer torque. We explain these thermally activated dynamics in terms of non-adiabatic stochastic resonance of magnetization driven by spin transfer torque. This type of magnetic stochastic resonance may find use in sensitive nanometer-scale microwave signal detectors.
△ Less
Submitted 18 December, 2009;
originally announced December 2009.
-
Magnetic Domain Wall Pumping by Spin Transfer Torque
Authors:
Carl T. Boone,
Ilya N. Krivorotov
Abstract:
We show that spin transfer torque from direct spin-polarized current applied parallel to a magnetic domain wall (DW) induces DW motion in a direction independent of the current polarity. This unidirectional response of the DW to spin torque enables DW pumping: long-range DW displacement driven by alternating current. Our numerical simulations reveal that DW pumping can be resonantly amplified th…
▽ More
We show that spin transfer torque from direct spin-polarized current applied parallel to a magnetic domain wall (DW) induces DW motion in a direction independent of the current polarity. This unidirectional response of the DW to spin torque enables DW pumping: long-range DW displacement driven by alternating current. Our numerical simulations reveal that DW pumping can be resonantly amplified through excitation of internal degrees of freedom of the DW by the current.
△ Less
Submitted 18 December, 2009;
originally announced December 2009.
-
Rapid Domain Wall Motion in Permalloy Nanowires Excited by Spin-Polarized Current Applied Perpendicular to the Nanowire
Authors:
C. T. Boone,
J. A. Katine,
M. Carey,
J. R. Childress,
X. Cheng,
I. N. Krivorotov
Abstract:
We study domain wall (DW) dynamics in permalloy nanowires excited by alternating spin-polarized current applied perpendicular to the nanowire. Spin torque ferromagnetic resonance measurements reveal that DW oscillations at a pinning site in the nanowire can be excited with velocities as high as 800 m/s at current densities below 10$^7$ A/cm$^2$.
We study domain wall (DW) dynamics in permalloy nanowires excited by alternating spin-polarized current applied perpendicular to the nanowire. Spin torque ferromagnetic resonance measurements reveal that DW oscillations at a pinning site in the nanowire can be excited with velocities as high as 800 m/s at current densities below 10$^7$ A/cm$^2$.
△ Less
Submitted 3 March, 2010; v1 submitted 9 September, 2009;
originally announced September 2009.
