Damping Wind Farm Resonances with Current Based Model Predictive Pulse Pattern Control
Authors:
Orcun Karaca,
Ioannis Tsoumas,
Tinus Dorfling,
Ran Chen,
Lennart Harnefors
Abstract:
It is well-established that a proportional current control gain emulates a resistor in the converter output impedance. Even though this resistance can provide additional damping to grid resonances, its effect for traditional linear current controllers is known to be rather limited. Moreover, for medium-voltage systems, high switching frequencies are not an option due to the high switching losses.…
▽ More
It is well-established that a proportional current control gain emulates a resistor in the converter output impedance. Even though this resistance can provide additional damping to grid resonances, its effect for traditional linear current controllers is known to be rather limited. Moreover, for medium-voltage systems, high switching frequencies are not an option due to the high switching losses. To meet the harmonic standards, it is expedient to use optimized pulse patterns. This further exacerbates the problems with the resistance of classical controllers, since an additional filtering would be required so that the current controller acts only on the fundamental component (and not on the ripple component). Such a design limits the damping effect not only in its amplitude but also in the frequency range where it is active. This paper shows that a high-bandwidth current-based model predictive pulse pattern controller can alleviate these limitations. The pulse pattern control approach can achieve a high gain even at low switching frequencies, while controlling directly the instantaneous currents (i.e., the fundamental component and the ripple together). With a fast implementation cycle, the frequency range where this damping effect is active can be further extended. Numerical studies showcase these benefits for a multi-phase medium-voltage wind power conversion system.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
Switching Frequency Limitation with Finite Control Set Model Predictive Control via Slack Variables
Authors:
Luca M. Hartmann,
Orcun Karaca,
Tinus Dorfling,
Tobias Geyer
Abstract:
Past work proposed an extension to finite control set model predictive control to track both a current reference and a switching frequency reference, simultaneously. Such an objective can jeopardize the current tracking performance, and this can potentially be alleviated by instead limiting the switching frequency. To this end, we propose to limit the switching frequency in finite control set mode…
▽ More
Past work proposed an extension to finite control set model predictive control to track both a current reference and a switching frequency reference, simultaneously. Such an objective can jeopardize the current tracking performance, and this can potentially be alleviated by instead limiting the switching frequency. To this end, we propose to limit the switching frequency in finite control set model predictive control. The switching frequency is captured with an infinite impulse response filter and bounded by an inequality constraint; its corresponding slack variable is penalized in the cost function. To solve the resulting problem efficiently, a sphere decoder with a computational speed-up is presented.
△ Less
Submitted 17 April, 2024; v1 submitted 10 December, 2023;
originally announced December 2023.
