-
Harvesting room-temperature plasticity in ceramics by mechanically seeded dislocations
Authors:
Xufei Fang,
Wenjun Lu,
Jiawen Zhang,
Christian Minnert,
Junhua Hou,
Sebastian Bruns,
Ulrike Kunz,
Atsutomo Nakamura,
Karsten Durst,
Jürgen Rödel
Abstract:
The quest for room-temperature ductile ceramics has been repeatedly fueled by hopes for large-scale applications but so far has been not successful. Recent demonstrations of enhanced functional properties in ceramics through judicious dislocation imprint, however, have been sparking renewed interest in dislocation plasticity in brittle ceramics. Here, we propose a facile approach using room-temper…
▽ More
The quest for room-temperature ductile ceramics has been repeatedly fueled by hopes for large-scale applications but so far has been not successful. Recent demonstrations of enhanced functional properties in ceramics through judicious dislocation imprint, however, have been sparking renewed interest in dislocation plasticity in brittle ceramics. Here, we propose a facile approach using room-temperature mechanically seeded mobile dislocations with a density of ~10^14/m^2 to significantly improve the room-temperature plasticity of ceramics with a large plastic strain beyond ~30%. The seeded mobile dislocations trigger profuse dislocation multiplication via cross slip and motion. Hence, they offer an avenue to suppress brittle fracture and harvest plasticity in ceramics without any additional high-temperature process. We employ both in situ nano-/micromechanical deformation and ex situ bulk deformation to bridge the length scales. This finding tackles the pressing bottleneck of dislocation engineering in ceramics for achieving ductile ceramics and harvesting both versatile mechanical and functional properties.
△ Less
Submitted 2 June, 2024;
originally announced June 2024.
-
Simultaneous mapping of magnetic and atomic structure for direct visualization of nanoscale magnetoelastic coupling
Authors:
Sangjun Kang,
Maximilian Töllner,
Di Wang,
Christian Minnert,
Karsten Durst,
Arnaud Caron,
Rafal E. Dunin-Borkowski,
Jeffrey McCord,
Christian Kübel,
Xiaoke Mu
Abstract:
Achieving a correlative measurement of both magnetic and atomic structures at the nanoscale is imperative to understand the fundamental magnetism of matters and for fostering the development of new magnetic nanomaterials. Conventional microscopy methods fall short in providing the two information simultaneously. Here, we develop a new approach to simultaneously map the magnetic field and atomic st…
▽ More
Achieving a correlative measurement of both magnetic and atomic structures at the nanoscale is imperative to understand the fundamental magnetism of matters and for fostering the development of new magnetic nanomaterials. Conventional microscopy methods fall short in providing the two information simultaneously. Here, we develop a new approach to simultaneously map the magnetic field and atomic structure at the nanoscale using Lorentz 4-dimensional scanning transmission electron microscopy (Ltz-4D-STEM). This method enables precise measurement of the characteristic atomic and magnetic structures across an extensive field of view, a critical aspect for investigating real-world ferromagnetic materials. It offers a comprehensive visualization and statistical evaluation of the different structural information at a pixel-by-pixel correlation. The new method allows to directly visualize the magnetoelastic coupling and the resulting complex magnetization arrangement as well as the competition between magnetoelastic and magnetostatic energy. This approach opens new avenues for in-depth studying the structure-property correlation of nanoscale magnetic materials.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Magnetic Materials via High-Pressure Torsion of Powders
Authors:
Lukas Weissitsch,
Franziska Staab,
Karsten Durst,
Andrea Bachmaier
Abstract:
Magnets are key materials for the electrification of mobility and also for the generation and transformation of electric energy. Research and development in recent decades lead to high performance magnets, which require a finely tuned microstructure to serve applications with ever increasing requirements. Besides optimizing already known materials and the search on novel material combinations, an…
▽ More
Magnets are key materials for the electrification of mobility and also for the generation and transformation of electric energy. Research and development in recent decades lead to high performance magnets, which require a finely tuned microstructure to serve applications with ever increasing requirements. Besides optimizing already known materials and the search on novel material combinations, an increasing interest in unconventional processing techniques and the utilization of magnetic concepts is apparent. Severe plastic deformation (SPD), in particular by high-pressure torsion (HPT) is a versatile and suitable method to manufacture microstructures not attained so far, but entitling different magnetic coupling mechanisms fostering magnetic properties. In this work, we review recent achievements obtained by HPT on soft and hard magnetic materials, focusing on powder as starting materials. Furthermore, we give specific attention to the formation of magnetic composites and highlight the opportunities of powder starting materials for HPT to exploit magnetic interaction mechanism.
△ Less
Submitted 22 December, 2023;
originally announced December 2023.
-
Influence of amorphous phase on coercivity in SmCo5-Cu nanocomposites
Authors:
Franziska Staab,
Yangyiwei Yang,
Eren Foya,
Enrico Bruder,
Benjamin Zingsem,
Esmaeil Adabifiroozjaei,
Konstantin Skokov,
Michael Farle,
Rafal E. Dunin-Borkowski,
Leopoldo Molina-Luna,
Oliver Gutfleisch,
Bai-Xiang Xu,
Karsten Durst
Abstract:
Severe plastic deformation of powder blends consisting of SmCo5-Cu results in magnetically hardened nanocomposite bulk materials. The microstructure is continuously refined with increasing torsional deformation, yet, coercivity saturates at a certain level of strain. Transmission electron microscopy (TEM) investigation of the microstructure reveals a partial amorphization of the SmCo5 phase due to…
▽ More
Severe plastic deformation of powder blends consisting of SmCo5-Cu results in magnetically hardened nanocomposite bulk materials. The microstructure is continuously refined with increasing torsional deformation, yet, coercivity saturates at a certain level of strain. Transmission electron microscopy (TEM) investigation of the microstructure reveals a partial amorphization of the SmCo5 phase due to high-pressure torsion by 20 applied rotations. In this amorphous matrix nanocrystals are embedded. The effect of these experimentally observed microstructural features on the magnetic properties are investigated by micromagnetic simulations, which show that an increasing volume fraction of nanocrystals is beneficial for higher coercivities. For a fixed volume fraction of nanocrystals the simulations reveal an increasing coercivity with decreasing the size of the nanocrystals due to increasing number of interfaces acting as pinning sites. Furthermore, our micromagnetic simulations disclose the mechanisms of the saturation and decline of magnetic hardening due to the strain induced by high-pressure torsion. The calculated coercivity fits very well to the experimentally observed coercivity of Hc=1.34 T. The knowledge can also be used to develop and provide optimization strategies from the microstructure perspective.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Towards engineering the perfect defect in high-performing permanent magnets
Authors:
S. Giron,
N. Polin,
E. Adabifiroozjaei,
Y. Yang,
A. Kovács,
T. P. Almeida,
D. Ohmer,
K. Üstüner,
A. Saxena,
M. Katter,
I. A. Radulov,
C. Freysoldt,
R. E. Dunin-Borkowski,
M. Farle,
K. Durst,
H. Zhang,
L. Alff,
K. Ollefs,
B. -X. Xu,
O. Gutfleisch,
L. Molina-Luna,
B. Gault,
K. P. Skokov
Abstract:
Permanent magnets draw their properties from a complex interplay, across multiple length scales, of the composition and distribution of their constituting phases, that act as building blocks, each with their associated intrinsic properties. Gaining a fundamental understanding of these interactions is hence key to decipher the origins of their magnetic performance and facilitate the engineering of…
▽ More
Permanent magnets draw their properties from a complex interplay, across multiple length scales, of the composition and distribution of their constituting phases, that act as building blocks, each with their associated intrinsic properties. Gaining a fundamental understanding of these interactions is hence key to decipher the origins of their magnetic performance and facilitate the engineering of better-performing magnets, through unlocking the design of the "perfect defects" for ultimate pinning of magnetic domains. Here, we deployed advanced multiscale microscopy and microanalysis on a bulk Sm2(CoFeCuZr)17 pinning-type high-performance magnet with outstanding thermal and chemical stability. Making use of regions with different chemical compositions, we showcase how both a change in the composition and distribution of copper, along with the atomic arrangements enforce the pinning of magnetic domains, as imaged by nanoscale magnetic induction mapping. Micromagnetic simulations bridge the scales to provide an understanding of how these peculiarities of micro- and nanostructure change the hard magnetic behaviour of Sm2(CoFeCuZr)17 magnets. Unveiling the origins of the reduced coercivity allows us to propose an atomic-scale defect and chemistry manipulation strategy to define ways toward future hard magnets.
△ Less
Submitted 4 June, 2023; v1 submitted 28 April, 2023;
originally announced April 2023.
-
Influence of microstructure on the application of Ni-Mn-In Heusler compounds for multicaloric cooling using magnetic field and uniaxial stress
Authors:
Lukas Pfeuffer,
Adrià Gràcia-Condal,
Tino Gottschall,
David Koch,
Tom Faske,
Enrico Bruder,
Jonas Lemke,
Andreas Taubel,
Semih Ener,
Franziska Scheibel,
Karsten Durst,
Konstantin P. Skokov,
Lluís Mañosa,
Antoni Planes,
Oliver Gutfleisch
Abstract:
Novel multicaloric cooling utilizing the giant caloric response of Ni-Mn-based metamagnetic shape-memory alloys to different external stimuli such as magnetic field, uniaxial stress and hydrostatic pressure is a promising candidate for energy-efficient and environmentally-friendly refrigeration. However, the role of microstructure when several external fields are applied simultaneously or sequenti…
▽ More
Novel multicaloric cooling utilizing the giant caloric response of Ni-Mn-based metamagnetic shape-memory alloys to different external stimuli such as magnetic field, uniaxial stress and hydrostatic pressure is a promising candidate for energy-efficient and environmentally-friendly refrigeration. However, the role of microstructure when several external fields are applied simultaneously or sequentially has been scarcely discussed in literature. Here, we synthesized ternary Ni-Mn-In alloys by suction casting and arc melting and analyzed the microstructural influence on the response to magnetic fields and uniaxial stress. By combining SEM-EBSD and stress-strain data, a significant effect of texture on the stress-induced martensitic transformation is revealed. It is shown that a <001> texture can strongly reduce the critical transformation stresses. The effect of grain size on the material failure is demonstrated and its influence on the magnetic-field-induced transformation dynamics is investigated. Temperature-stress and temperature-magnetic field phase diagrams are established and single caloric performances are characterized in terms of $Δ{s_T}$ and $Δ{T_{ad}}$. The cyclic $Δ{T_{ad}}$ values are compared to the ones achieved in the multicaloric exploiting-hysteresis cycle. It turns out that a suction-cast microstructure and the combination of both stimuli enables outstanding caloric effects in moderate external fields which can significantly exceed the single caloric performances. In particular for Ni-Mn-In, the maximum cyclic effect in magnetic fields of 1.9 T is increased by more than 200 % to -4.1 K when a moderate sequential stress of 55 MPa is applied. Our results illustrate the crucial role of microstructure for multicaloric cooling using Ni-Mn-based metamagnetic shape-memory alloys.
△ Less
Submitted 9 November, 2021; v1 submitted 4 November, 2021;
originally announced November 2021.